summaryrefslogtreecommitdiff
path: root/board/amcc
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2007-01-13 07:59:19 +0100
committerStefan Roese <sr@denx.de>2007-01-13 07:59:19 +0100
commit36adff362c2c0141ff8a810d42a7e478f779130f (patch)
tree32b6e6a4809f6345a63a17c50bf98559d3f2a5c5 /board/amcc
parente0b9ea8c8a294de6a5350ae638879d24b5b709d6 (diff)
downloadu-boot-imx-36adff362c2c0141ff8a810d42a7e478f779130f.zip
u-boot-imx-36adff362c2c0141ff8a810d42a7e478f779130f.tar.gz
u-boot-imx-36adff362c2c0141ff8a810d42a7e478f779130f.tar.bz2
[PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
Now the board revision and the current PCI bus speed are printed after the board message. Also the EBC initialising is now done via defines in the board config file. Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/amcc')
-rw-r--r--board/amcc/yosemite/yosemite.c25
1 files changed, 7 insertions, 18 deletions
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 588ee90..d47219c 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -39,24 +39,6 @@ int board_early_init_f(void)
reg = mfdcr(ebccfgd);
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
- mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
- mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */
-
- mtebc(pb1ap, 0x00000000);
- mtebc(pb1cr, 0x00000000);
-
- mtebc(pb2ap, 0x04814500);
- /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
-
- mtebc(pb3ap, 0x00000000);
- mtebc(pb3cr, 0x00000000);
-
- mtebc(pb4ap, 0x00000000);
- mtebc(pb4cr, 0x00000000);
-
- mtebc(pb5ap, 0x00000000);
- mtebc(pb5cr, 0x00000000);
-
/*--------------------------------------------------------------------
* Setup the GPIO pins
*-------------------------------------------------------------------*/
@@ -186,8 +168,15 @@ int misc_init_r (void)
int checkboard(void)
{
char *s = getenv("serial#");
+ u8 rev;
+ u8 val;
printf("Board: Yosemite - AMCC PPC440EP Evaluation Board");
+
+ rev = *(u8 *)(CFG_CPLD + 0);
+ val = *(u8 *)(CFG_CPLD + 5) & 0x01;
+ printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
+
if (s != NULL) {
puts(", serial# ");
puts(s);