Merge with /home/stefan/git/u-boot/acadia

7 files changed, 2257 insertions, 0 deletions

diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile
new file mode 100644
index 0000000..183f694
--- /dev/null
+++ b/board/amcc/acadia/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o cpr.o memory.o
+SOBJS	=
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
new file mode 100644
index 0000000..c8aaad2
--- /dev/null
+++ b/board/amcc/acadia/acadia.c
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+extern void board_pll_init_f(void);
+
+/* Some specific Acadia Defines */
+#define CPLD_BASE	0x80000000
+
+void liveoak_gpio_init(void)
+{
+	/*
+	 * GPIO0 setup (select GPIO or alternate function)
+	 */
+       	out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
+       	out32(GPIO0_OSRH, CFG_GPIO0_OSRH);	/* output select */
+       	out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
+       	out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H);	/* input select */
+       	out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
+       	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);	/* three-state select */
+       	out32(GPIO0_TCR, CFG_GPIO0_TCR);  /* enable output driver for outputs */
+
+	/*
+	 * Ultra (405EZ) was nice enough to add another GPIO controller
+	 */
+	out32(GPIO1_OSRH, CFG_GPIO1_OSRH);	/* output select */
+	out32(GPIO1_OSRL, CFG_GPIO1_OSRL);
+	out32(GPIO1_ISR1H, CFG_GPIO1_ISR1H);	/* input select */
+	out32(GPIO1_ISR1L, CFG_GPIO1_ISR1L);
+	out32(GPIO1_TSRH, CFG_GPIO1_TSRH);	/* three-state select */
+	out32(GPIO1_TSRL, CFG_GPIO1_TSRL);
+	out32(GPIO1_TCR, CFG_GPIO1_TCR);  /* enable output driver for outputs */
+}
+
+#if 0 /* test-only: not called at all??? */
+void ext_bus_cntlr_init(void)
+{
+#if (defined(EBC_PB4AP) && defined(EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4))
+       	mtebc(pb4ap, EBC_PB4AP);
+       	mtebc(pb4cr, EBC_PB4CR);
+#endif
+}
+#endif
+
+int board_early_init_f(void)
+{
+	unsigned int reg;
+
+#if 0 /* test-only */
+	/*
+	 * If CRAM memory and SPI/NAND boot, and if the CRAM memory is
+	 * already initialized by the pre-loader then we can't reinitialize
+	 * CPR registers, GPIO registers and EBC registers as this will
+	 * have the effect of un-initializing CRAM.
+	 */
+	spr_reg = (volatile unsigned long) mfspr(SPRG7);
+	if (spr_reg != LOAK_CRAM) { /* != CRAM */
+		board_pll_init_f();
+		liveoak_gpio_init();
+		ext_bus_cntlr_init();
+
+		mtebc(pb1ap, CFG_EBC_PB1AP);
+		mtebc(pb1cr, CFG_EBC_PB1CR);
+
+		mtebc(pb2ap, CFG_EBC_PB2AP);
+		mtebc(pb2cr, CFG_EBC_PB2CR);
+	}
+#else
+	board_pll_init_f();
+	liveoak_gpio_init();
+/*	ext_bus_cntlr_init(); */
+#endif
+
+#if 0 /* test-only (orig) */
+	/*
+	 * If we boot from NAND Flash, we are running in
+	 * RAM, so disable the EBC_CS0 so that it goes back
+	 * to the NOR Flash.  It will be enabled later
+	 * for the NAND Flash on EBC_CS1
+	 */
+	mfsdr(sdrultra0, reg);
+	mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0);
+#endif
+#if 0 /* test-only */
+	/* configure for NAND */
+	mfsdr(sdrultra0, reg);
+	reg &= ~SDR_ULTRA0_CSN_MASK;
+	reg |= SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS;
+	mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0);
+#endif
+
+	/* USB Host core needs this bit set */
+	mfsdr(sdrultra1, reg);
+	mtsdr(sdrultra1, reg | SDR_ULTRA1_LEDNENABLE);
+
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000010);
+	mtdcr(uicpr, 0xFE7FFFF0);	/* set int polarities */
+	mtdcr(uictr, 0x00000010);	/* set int trigger levels */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	return 0;
+}
+
+int misc_init_f(void)
+{
+	/* Set EPLD to take PHY out of reset */
+	out8(CPLD_BASE + 0x05, 0x00);
+	udelay(100000);
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: Acadia - AMCC PPC405EZ Evaluation Board");
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk
new file mode 100644
index 0000000..79b948e
--- /dev/null
+++ b/board/amcc/acadia/config.mk
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(TOPDIR)/board/amcc/liveoak/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFC0000
+endif
+
+ifeq ($(CONFIG_NAND_U_BOOT),y)
+LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
+endif
+
+ifeq ($(CONFIG_SPI_U_BOOT),y)
+LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-spi.lds
+PAD_TO = 0x00840000 
+endif
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/board/amcc/acadia/cpr.c b/board/amcc/acadia/cpr.c
new file mode 100644
index 0000000..10d8290
--- /dev/null
+++ b/board/amcc/acadia/cpr.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <ppc405.h>
+
+/* test-only: move into cpu directory!!! */
+
+#if defined(PLLMR0_200_133_66)
+void board_pll_init_f(void)
+{
+	/*
+	 * set PLL clocks based on input sysclk is 33M
+	 *
+	 * ----------------------------------
+	 * | CLK   | FREQ (MHz) | DIV RATIO |
+	 * ----------------------------------
+	 * | CPU   |  200.0     |   4 (0x02)|
+	 * | PLB   |  133.3     |   6 (0x06)|
+	 * | OPB   |   66.6     |  12 (0x0C)|
+	 * | EBC   |   66.6     |  12 (0x0C)|
+	 * | SPI   |   66.6     |  12 (0x0C)|
+	 * | UART0 |   10.0     |  40 (0x28)|
+	 * | UART1 |   10.0     |  40 (0x28)|
+	 * | DAC   |    2.0     | 200 (0xC8)|
+	 * | ADC   |    2.0     | 200 (0xC8)|
+	 * | PWM   |  100.0     |   4 (0x04)|
+	 * | EMAC  |   25.0     |  16 (0x10)|
+	 * -----------------------------------
+	 */
+
+	/* Initialize PLL */
+	mtcpr(cprpllc, 0x0000033c);
+	mtcpr(cprplld, 0x0c010200);
+	mtcpr(cprprimad, 0x04060c0c);
+	mtcpr(cprperd0, 0x000c0000);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(cprclkupd, 0x40000000);
+}
+
+#elif defined(PLLMR0_266_160_80)
+
+void board_pll_init_f(void)
+{
+	/*
+	 * set PLL clocks based on input sysclk is 33M
+	 *
+	 * ----------------------------------
+	 * | CLK   | FREQ (MHz) | DIV RATIO |
+	 * ----------------------------------
+	 * | CPU   |  266.64    |   3       |
+	 * | PLB   |  159.98    |   5 (0x05)|
+	 * | OPB   |   79.99    |  10 (0x0A)|
+	 * | EBC   |   79.99    |  10 (0x0A)|
+	 * | SPI   |   79.99    |  10 (0x0A)|
+	 * | UART0 |   28.57    |   7 (0x07)|
+	 * | UART1 |   28.57    |   7 (0x07)|
+	 * | DAC   |   28.57    |   7 (0xA7)|
+	 * | ADC   |    4     	|  50 (0x32)|
+	 * | PWM   |   28.57    |   7 (0x07)|
+	 * | EMAC  |    4       |  50 (0x32)|
+	 * -----------------------------------
+	 */
+
+	/* Initialize PLL */
+	mtcpr(cprpllc,   0x20000238);
+	mtcpr(cprplld,   0x03010400);
+	mtcpr(cprprimad, 0x03050a0a);
+	mtcpr(cprperc0,  0x00000000);
+	mtcpr(cprperd0,  0x070a0707);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(cprperd1,  0x07323200);
+	mtcpr(cprclkupd, 0x40000000);
+}
+
+#elif defined(PLLMR0_333_166_83)
+
+void board_pll_init_f(void)
+{
+	/*
+	 * set PLL clocks based on input sysclk is 33M
+	 *
+	 * ----------------------------------
+	 * | CLK   | FREQ (MHz) | DIV RATIO |
+	 * ----------------------------------
+	 * | CPU   |  333.33    |   2       |
+	 * | PLB   |  166.66    |   4 (0x04)|
+	 * | OPB   |   83.33    |   8 (0x08)|
+	 * | EBC   |   83.33    |   8 (0x08)|
+	 * | SPI   |   83.33    |   8 (0x08)|
+	 * | UART0 |   16.66    |   5 (0x05)|
+	 * | UART1 |   16.66    |   5 (0x05)|
+	 * | DAC   |   ????     | 166 (0xA6)|
+	 * | ADC   |   ????     | 166 (0xA6)|
+	 * | PWM   |   41.66    |   3 (0x03)|
+	 * | EMAC  |   ????     |   3 (0x03)|
+	 * -----------------------------------
+	 */
+
+	/* Initialize PLL */
+	mtcpr(cprpllc,   0x0000033C);
+	mtcpr(cprplld,   0x0a010000);
+	mtcpr(cprprimad, 0x02040808);
+	mtcpr(cprperd0,  0x02080505);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(cprperd1,  0xA6A60300);
+	mtcpr(cprclkupd, 0x40000000);
+}
+
+#elif defined(PLLMR0_100_100_12)
+
+void board_pll_init_f(void)
+{
+	/*
+	 * set PLL clocks based on input sysclk is 33M
+	 *
+	 * ----------------------
+	 * | CLK   | FREQ (MHz) |
+	 * ----------------------
+	 * | CPU   |  100.00    |
+	 * | PLB   |  100.00    |
+	 * | OPB   |   12.00    |
+	 * | EBC   |   49.00    |
+	 * ----------------------
+	 */
+
+	/* Initialize PLL */
+	mtcpr(cprpllc,   0x000003BC);
+	mtcpr(cprplld,   0x06060600);
+	mtcpr(cprprimad, 0x02020004);
+	mtcpr(cprperd0,  0x04002828);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(cprperd1,  0xC8C81600);
+	mtcpr(cprclkupd, 0x40000000);
+}
+#endif /* CPU_<speed>_405EZ */
+
+#if defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL)
+/*
+ * Get timebase clock frequency
+ */
+unsigned long get_tbclk (void)
+{
+	unsigned long cpr_plld;
+	unsigned long cpr_primad;
+	unsigned long primad_cpudv;
+	unsigned long pllFbkDiv;
+	unsigned long freqProcessor;
+
+	/*
+	 * Read PLL Mode registers
+	 */
+	mfcpr(cprplld, cpr_plld);
+
+	/*
+	 * Read CPR_PRIMAD register
+	 */
+	mfcpr(cprprimad, cpr_primad);
+
+	/*
+	 * Determine CPU clock frequency
+	 */
+	primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
+	if (primad_cpudv == 0)
+		primad_cpudv = 16;
+
+	/*
+	 * Determine FBK_DIV.
+	 */
+        pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+        if (pllFbkDiv == 0)
+                pllFbkDiv = 256;
+
+	freqProcessor = (CONFIG_SYS_CLK_FREQ * pllFbkDiv) / primad_cpudv;
+
+	return (freqProcessor);
+}
+#endif	/* defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) */
diff --git a/board/amcc/acadia/flash.c b/board/amcc/acadia/flash.c
new file mode 100644
index 0000000..39a11f9
--- /dev/null
+++ b/board/amcc/acadia/flash.c
@@ -0,0 +1,1108 @@
+/*
+ * (C) Copyright 2004-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+
+/*
+ * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
+ */
+static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
+	{0xffc00001}, /* 0:boot from big flash */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word_1(flash_info_t * info, ulong dest, ulong data);
+static int write_word_2(flash_info_t * info, ulong dest, ulong data);
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last);
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info);
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info);
+#endif
+
+void flash_print_info(flash_info_t * info)
+{
+	int i;
+	int k;
+	int size;
+	int erased;
+	volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:
+		printf("AMD ");
+		break;
+	case FLASH_MAN_STM:
+		printf("STM ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf("FUJITSU ");
+		break;
+	case FLASH_MAN_SST:
+		printf("SST ");
+		break;
+	case FLASH_MAN_MX:
+		printf("MIXC ");
+		break;
+	default:
+		printf("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM040:
+		printf("AM29F040 (512 Kbit, uniform sector size)\n");
+		break;
+	case FLASH_AM400B:
+		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM400T:
+		printf("AM29LV400T (4 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM800B:
+		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM800T:
+		printf("AM29LV800T (8 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AMD016:
+		printf("AM29F016D (16 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_AM160B:
+		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM160T:
+		printf("AM29LV160T (16 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM320B:
+		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM320T:
+		printf("AM29LV320T (32 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM033C:
+		printf("AM29LV033C (32 Mbit, top boot sector)\n");
+		break;
+	case FLASH_SST800A:
+		printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_SST160A:
+		printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_STMW320DT:
+		printf ("M29W320DT (32 M, top sector)\n");
+		break;
+	case FLASH_MXLV320T:
+		printf ("MXLV320T (32 Mbit, top sector)\n");
+		break;
+	default:
+		printf("Unknown Chip Type\n");
+		break;
+	}
+
+	printf("  Size: %ld KB in %d Sectors\n",
+	       info->size >> 10, info->sector_count);
+
+	printf("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		/*
+		 * Check if whole sector is erased
+		 */
+		if (i != (info->sector_count - 1))
+			size = info->start[i + 1] - info->start[i];
+		else
+			size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned long *)info->start[i];
+		size = size >> 2;	/* divide by 4 for longword access */
+		for (k = 0; k < size; k++) {
+			if (*flash++ != 0xffffffff) {
+				erased = 0;
+				break;
+			}
+		}
+
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s%s",
+		       info->start[i],
+		       erased ? " E" : "  ", info->protect[i] ? "RO " : "   ");
+	}
+	printf("\n");
+	return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+	/* bit 0 used for big flash marking */
+	if ((ulong)addr & 0x1) {
+		return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info);
+	} else {
+		return flash_get_size_1(addr, info);
+	}
+}
+
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info)
+#else
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+#endif
+{
+	short i;
+	CFG_FLASH_WORD_SIZE value;
+	ulong base = (ulong) addr;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+	/* Write auto select command: read Manufacturer ID */
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	udelay(1000);
+
+	value = addr2[0];
+	DEBUGF("FLASH MANUFACT: %x\n", value);
+
+	switch (value) {
+	case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+		info->flash_id = FLASH_MAN_STM;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);	/* no or unknown flash  */
+	}
+
+	value = addr2[1];	/* device ID            */
+	DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+	switch (value) {
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000;	/* => 512 ko */
+		break;
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000;	/* => 512 ko */
+		break;
+
+	case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000;	/* => 512 ko */
+		break;
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+		info->flash_id += FLASH_AMD016;
+		info->sector_count = 32;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+		info->flash_id += FLASH_AMDLV033C;
+		info->sector_count = 64;
+		info->size = 0x00400000;
+		break;		/* => 4 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;		/* => 0.5 MB            */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;		/* => 0.5 MB            */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;		/* => 1 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;		/* => 1 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);	/* => no or unknown flash */
+	}
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type        */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+				    base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type           */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+		/* For AMD29033C flash we need to resend the command of *
+		 * reading flash protection for upper 8 Mb of flash     */
+		if (i == 32) {
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+		}
+
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+			info->protect[i] = 0;
+		else
+			info->protect[i] = addr2[2] & 1;
+	}
+
+	/* issue bank reset to return to read mode */
+	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+	return (info->size);
+}
+
+static int wait_for_DQ7_1(flash_info_t * info, int sect)
+{
+	ulong start, now, last;
+	volatile CFG_FLASH_WORD_SIZE *addr =
+	    (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+	start = get_timer(0);
+	last = start;
+	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+	       (CFG_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf("Timeout\n");
+			return -1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc('.');
+			last = now;
+		}
+	}
+	return 0;
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
+		return flash_erase_2(info, s_first, s_last);
+	} else {
+		return flash_erase_1(info, s_first, s_last);
+	}
+}
+
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
+#else
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+#endif
+{
+	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf("- missing\n");
+		} else {
+			printf("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	} else {
+		printf("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				for (i = 0; i < 50; i++)
+					udelay(1000);	/* wait 1 ms */
+			} else {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+			}
+			l_sect = sect;
+			/*
+			 * Wait for each sector to complete, it's more
+			 * reliable.  According to AMD Spec, you must
+			 * issue all erase commands within a specified
+			 * timeout.  This has been seen to fail, especially
+			 * if printf()s are included (for debug)!!
+			 */
+			wait_for_DQ7_1(info, sect);
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay(1000);
+
+	/* reset to read mode */
+	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+
+	printf(" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i = 0; i < 4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < 4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+{
+	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
+		return write_word_2(info, dest, data);
+	} else {
+		return write_word_1(info, dest, data);
+	}
+}
+
+static int write_word_1(flash_info_t * info, ulong dest, ulong data)
+#else
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+#endif
+{
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data) {
+		return (2);
+	}
+
+	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		/* data polling for D7 */
+		start = get_timer(0);
+		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+				return (1);
+			}
+		}
+	}
+
+	return (0);
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+
+#undef  CFG_FLASH_WORD_SIZE
+#define CFG_FLASH_WORD_SIZE unsigned short
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
+{
+	short i;
+	int n;
+	CFG_FLASH_WORD_SIZE value;
+	ulong base = (ulong) addr;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+	/* issue bank reset to return to read mode */
+	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+	/* Write auto select command: read Manufacturer ID */
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	udelay(1000);
+
+	value = addr2[0];
+	DEBUGF("FLASH MANUFACT: %x\n", value);
+
+#if 0 /* TODO: remove ifdef when Flash responds correctly */
+	switch (value) {
+	case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+		info->flash_id = FLASH_MAN_STM;
+		break;
+	case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+		info->flash_id = FLASH_MAN_MX;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);	/* no or unknown flash  */
+	}
+#endif /* TODO: remove ifdef when Flash responds correctly */
+
+	/*
+	 * TODO: Start
+	 * 	 uncomment block above when Flash responds correctly.
+	 *	 also remove the lines below:
+	 */
+	info->flash_id = FLASH_MAN_AMD;
+	DEBUGF("FLASH MANUFACT: FLASH_MAN_AMD\n");
+	/* TODO: End */
+
+	value = addr2[1];	/* device ID            */
+
+	DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+#if 0 /* TODO: remove ifdef when Flash responds correctly */
+	switch (value) {
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
+		info->flash_id += FLASH_STMW320DT;
+		info->sector_count = 67;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+		info->flash_id += FLASH_MXLV320T;
+		info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);	/* => no or unknown flash */
+	}
+#endif /* TODO: remove ifdef when Flash responds correctly */
+
+	/* 
+	 * TODO: Start
+	 * 	 uncomment block above when Flash responds correctly.
+	 *	 also remove the lines below:
+	 */
+	DEBUGF("\nFLASH DEVICEID: FLASH_AM320T\n");
+	info->flash_id += FLASH_AM320T;
+	info->sector_count = 71;
+	info->size = 0x00400000;  /* => 4 MB	*/
+	/* TODO: End */
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
+		/* set sector offsets for top boot block type		*/
+		base += info->size;
+		i = info->sector_count;
+		/*  1 x 16k boot sector */
+		base -= 16 << 10;
+		--i;
+		info->start[i] = base;
+		/*  2 x 8k  boot sectors */
+		for (n=0; n<2; ++n) {
+			base -= 8 << 10;
+			--i;
+			info->start[i] = base;
+		}
+		/*  1 x 32k boot sector */
+		base -= 32 << 10;
+		--i;
+		info->start[i] = base;
+
+		while (i > 0) {			/* 64k regular sectors	*/
+			base -= 64 << 10;
+			--i;
+			info->start[i] = base;
+		}
+	} else if ( ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) ||
+		    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ) {
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00002000;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		info->start[i--] = base + info->size - 0x0000a000;
+		info->start[i--] = base + info->size - 0x0000c000;
+		info->start[i--] = base + info->size - 0x0000e000;
+		info->start[i--] = base + info->size - 0x00010000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00010000;
+		}
+	}
+	else {
+		if (info->flash_id & FLASH_BTYPE){
+			/* set sector offsets for bottom boot block type */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+				    base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address,(A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+		/* For AMD29033C flash we need to resend the command of *
+		 * reading flash protection for upper 8 Mb of flash     */
+		if (i == 32) {
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+		}
+
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+			info->protect[i] = 0;
+		else
+			info->protect[i] = addr2[2] & 1;
+	}
+
+	/* issue bank reset to return to read mode */
+	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+	return (info->size);
+}
+
+/*
+ * TODO: FIX: this wait loop sometimes fails: DQ7 indicates the erase command
+ *		never was accepted (i.e. didn't start) - why????
+ */
+static int wait_for_DQ7_2(flash_info_t * info, int sect)
+{
+	ulong start, now, last, counter = 0;
+	volatile CFG_FLASH_WORD_SIZE *addr =
+	    (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+	start = get_timer(0);
+	DEBUGF("DQ7_2: start = 0x%08lx\n", start);
+	last = start;
+	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+	       (CFG_FLASH_WORD_SIZE) 0x00800080) {
+		DEBUGF("DQ7_2: start = 0x%08lx, now = 0x%08lx\n", start, now);	
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf("Timeout\n");
+			return -1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc('.');
+			last = now;
+		}
+		udelay(1000000); /* 1 sec */
+		putc('.');
+		counter++;
+		if (counter > 5)  {
+			return -1;
+		}
+		DEBUGF("DQ7_2: now = 0x%08lx, last = 0x%08lx\n", now, last);
+	}
+	return 0;
+}
+
+static void wr_flash_cmd(ulong sector, ushort addr, CFG_FLASH_WORD_SIZE value)
+{
+	int fw_size;
+	
+	fw_size = sizeof(value);
+	switch (fw_size)
+	{
+	case 1:
+		out8((ulong)(sector + addr), value);
+		break;
+	case 2:
+		out16((ulong)(sector + (addr << 1)), value);
+		break;
+	default:
+		printf("flash_erase: error incorrect chip programing size.\n");
+	}
+	return;
+}
+
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
+{
+	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect, count = 0;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf("- missing\n");
+		} else {
+			printf("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	} else {
+		printf("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first, count = 0; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				for (i = 0; i < 50; i++)
+					udelay(1000);	/* wait 1 ms */
+			} else {
+				/*
+				 * TODO: fix code
+				 */
+				wr_flash_cmd((ulong)addr, 0, (CFG_FLASH_WORD_SIZE) 0x00F000F0);
+				wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00AA00AA);
+				wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR1, (CFG_FLASH_WORD_SIZE) 0x00550055);
+				wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00800080);
+				wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00AA00AA);
+				wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR1, (CFG_FLASH_WORD_SIZE) 0x00550055);
+				wr_flash_cmd((ulong)addr2, 0, (CFG_FLASH_WORD_SIZE) 0x00300030);
+				udelay(2000000);	/* 2 sec */
+				wr_flash_cmd((ulong)addr, 0, (CFG_FLASH_WORD_SIZE) 0x00F000F0);
+
+#if 0
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+#endif
+			}
+			l_sect = sect;
+			printf("..");
+			printf("..");
+			/*
+			 * Wait for each sector to complete, it's more
+			 * reliable.  According to AMD Spec, you must
+			 * issue all erase commands within a specified
+			 * timeout.  This has been seen to fail, especially
+			 * if printf()s are included (for debug)!!
+			 */
+			wait_for_DQ7_2(info, sect);
+			count++;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay(1000);
+
+	/* reset to read mode */
+	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+
+	printf(" done\n");
+	
+	if (count > 0) {	
+		return 0;
+	} else {
+		return 1;
+	}
+}
+
+static int write_word_2(flash_info_t * info, ulong dest, ulong data)
+{
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data) {
+		return (2);
+	}
+
+	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		/* data polling for D7 */
+		start = get_timer(0);
+		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+				return (1);
+			}
+		}
+	}
+
+	return (0);
+}
+#endif /* CFG_FLASH_2ND_16BIT_DEV */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+	unsigned long total_b = 0;
+	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned short index = 0;
+	int i;
+
+	index = 0;
+
+	DEBUGF("\n");
+	DEBUGF("FLASH: Index: %d\n", index);
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		flash_info[i].sector_count = -1;
+		flash_info[i].size = 0;
+
+		/* check whether the address is 0 */
+		if (flash_addr_table[index][i] == 0) {
+			continue;
+		}
+
+		/* call flash_get_size() to initialize sector address */
+		size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i],
+				   &flash_info[i]);
+		flash_info[i].size = size_b[i];
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+			       i, size_b[i], size_b[i] << 20);
+			flash_info[i].sector_count = -1;
+			flash_info[i].size = 0;
+		}
+
+		/* Monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    &flash_info[i]);
+#if defined(CFG_ENV_IS_IN_FLASH)
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[i]);
+#if defined(CFG_ENV_IS_IN_FLASH) && defined(CFG_ENV_ADDR_REDUND)
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[i]);
+#endif
+#endif
+
+		total_b += flash_info[i].size;
+	}
+
+	return total_b;
+}
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
new file mode 100644
index 0000000..0f1de71
--- /dev/null
+++ b/board/amcc/acadia/memory.c
@@ -0,0 +1,564 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#define CRAM_BANK0_BASE 		0x0
+#define CRAM_DIDR			0x00100000
+#define	MICRON_MT45W8MW16BGX_CRAM_ID	0x1b431b43
+#define	MICRON_MT45W8MW16BGX_CRAM_ID2	0x13431343
+#define	MICRON_DIDR_VENDOR_ID		0x00030003	/* 00011b */
+#define	CRAM_DIDR_VENDOR_ID_MASK	0x001f001f	/* DIDR[4:0] */
+#define	CRAM_DEVID_NOT_SUPPORTED	0x00000000
+
+#define PSRAM_PASS	0x50415353	/* "PASS" */
+#define PSRAM_FAIL	0x4641494C	/* "FAIL" */
+
+static u32 is_cram_inited(void);
+static u32 is_cram(void);
+static long int cram_init(u32);
+static void cram_bcr_write(u32);
+void udelay (unsigned long);
+
+void sdram_init(void)
+{
+	volatile unsigned long spr_reg;
+
+	/*
+	 * If CRAM not initialized or CRAM looks initialized because this
+	 * is after a warm reboot then set SPRG7 to indicate CRAM needs
+	 * initialization.  Note that CRAM is initialized by the SPI and
+	 * NAND preloader.
+	 */
+	spr_reg = (volatile unsigned long) mfspr(SPRG6);
+	if ((is_cram_inited() != 1) || (spr_reg != LOAK_SPL)) {
+		mtspr(SPRG7, LOAK_NONE);	/* "NONE" */
+	}
+
+#if 1
+	/*
+	 * When running the NAND SPL, the normal EBC configuration is not
+	 * done, so We need to enable EPLD access on EBC_CS_2 and the memory
+	 * on EBC_CS_3
+	 */
+
+	/* Enable CPLD - Needed for PSRAM Access */
+
+
+	/* Init SDRAM by setting EBC Bank 3 for PSRAM */
+	mtebc(pb1ap, CFG_EBC_PB1AP);
+	mtebc(pb1cr, CFG_EBC_PB1CR);
+
+	mtebc(pb2ap, CFG_EBC_PB2AP);
+	mtebc(pb2cr, CFG_EBC_PB2CR);
+
+	/* pre-boot loader code: we are in OCM */
+	mtspr(SPRG6, LOAK_SPL);	/* "SPL " */
+	mtspr(SPRG7, LOAK_OCM);	/* "OCM " */
+#endif
+
+	return;
+}
+
+static void cram_bcr_write(u32 wr_val)
+{
+	u32 tmp_reg;
+	u32 val;
+	volatile u32 gpio_reg;
+
+	/* # Program CRAM write */
+
+	/*
+	 * set CRAM_CRE = 0x1
+	 * set wr_val = wr_val << 2
+	 */
+	gpio_reg = in32(GPIO1_OR);
+	out32(GPIO1_OR,  gpio_reg | 0x00000400);
+	wr_val = wr_val << 2;
+	/* wr_val = 0x1c048; */
+
+
+	/*
+	 * # stop PLL clock before programming CRAM
+	 * set EPLD0_MUX_CTL.OESPR3 = 1
+	 * delay 2
+	 */
+
+
+	/*
+	 * # CS1
+	 * read 0x00200000
+	 * #shift 2 bit left before write
+	 * set val = wr_val + 0x00200000
+	 * write dmem val 0
+	 * read 0x00200000 val
+	 * print val/8x
+	 */
+	tmp_reg = in32(0x00200000);
+	val = wr_val + 0x00200000;
+	/* val = 0x0021c048; */
+	out32(val, 0x0000);
+	udelay(100000);
+	val = in32(0x00200000);
+
+	debug("CRAM VAL: %x for CS1 ", val);
+
+	/*
+	 * # CS2
+	 * read 0x02200000
+	 * #shift 2 bit left before write
+	 * set val = wr_val + 0x02200000
+	 * write dmem val 0
+	 * read 0x02200000 val
+	 * print val/8x
+	 */
+	tmp_reg = in32(0x02200000);
+	val = wr_val + 0x02200000;
+	/* val = 0x0221c048; */
+	out32(val, 0x0000);
+	udelay(100000);
+	val = in32(0x02200000);
+
+	debug("CRAM VAL: %x for CS2 ", val);
+
+	/*
+	 * # Start PLL clock before programming CRAM
+	 * set EPLD0_MUX_CTL.OESPR3 = 0
+	 */
+
+
+	/*
+	 * set CRAMCR = 0x1
+	 */
+	gpio_reg = in32(GPIO1_OR);
+	out32(GPIO1_OR,  gpio_reg | 0x00000400);
+
+	/*
+	 * # read CRAM config BCR ( bit19:18 = 10b )
+	 * #read 0x00200000
+	 * # 1001_1001_0001_1111 ( 991f ) =>
+	 * #10_0110_0100_0111_1100  =>   2647c => 0022647c
+	 * #0011_0010_0011_1110 (323e)
+	 * #
+	 */
+
+	/*
+	 * set EPLD0_MUX_CTL.CRAMCR = 0x0
+	 */
+	gpio_reg = in32(GPIO1_OR);
+	out32(GPIO1_OR,  gpio_reg & 0xFFFFFBFF);
+	return;
+}
+
+static u32 is_cram_inited()
+{
+	volatile unsigned long spr_reg;
+
+	/*
+ 	 * If CRAM is initialized already, then don't reinitialize it again.
+	 * In the case of NAND boot and SPI boot, CRAM will already be
+	 * initialized by the pre-loader
+	 */
+	spr_reg = (volatile unsigned long) mfspr(SPRG7);
+	if (spr_reg == LOAK_CRAM) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/******
+ * return 0 if not CRAM
+ * return 1 if CRAM and it's already inited by preloader
+ * else return cram_id (CRAM Device Identification Register)
+ ******/
+static u32 is_cram(void)
+{
+	u32 gpio_TCR, gpio_OSRL, gpio_OR, gpio_ISR1L;
+	volatile u32 gpio_reg;
+	volatile u32 cram_id = 0;
+
+	if (is_cram_inited() == 1) {
+		/* this is CRAM and it is already inited (by preloader) */
+		cram_id = 1;
+	} else {
+		/*
+		 * # CRAM CLOCK
+		 * set GPIO0_TCR.G8 = 1
+		 * set GPIO0_OSRL.G8 = 0
+		 * set GPIO0_OR.G8 = 0
+		 */
+		gpio_reg = in32(GPIO0_TCR);
+		gpio_TCR = gpio_reg;
+		out32(GPIO0_TCR, gpio_reg | 0x00800000);
+		gpio_reg = in32(GPIO0_OSRL);
+		gpio_OSRL = gpio_reg;
+		out32(GPIO0_OSRL, gpio_reg & 0xffffbfff);
+		gpio_reg = in32(GPIO0_OR);
+		gpio_OR = gpio_reg;
+		out32(GPIO0_OR, gpio_reg & 0xff7fffff);
+
+		/*
+		 * # CRAM Addreaa Valid
+		 * set GPIO0_TCR.G10 = 1
+		 * set GPIO0_OSRL.G10 = 0
+		 * set GPIO0_OR.G10 = 0
+		 */
+		gpio_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, gpio_reg | 0x00200000);
+		gpio_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, gpio_reg & 0xfffffbff);
+		gpio_reg = in32(GPIO0_OR);
+		out32(GPIO0_OR, gpio_reg & 0xffdfffff);
+
+		/*
+		 * # config input (EBC_WAIT)
+		 * set GPIO0_ISR1L.G9 = 1
+		 * set GPIO0_TCR.G9 = 0
+		 */
+		gpio_reg = in32(GPIO0_ISR1L);
+		gpio_ISR1L = gpio_reg;
+		out32(GPIO0_ISR1L, gpio_reg | 0x00001000);
+		gpio_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, gpio_reg & 0xffbfffff);
+
+		/*
+		 * Enable CRE to read Registers
+		 * set GPIO0_TCR.21 = 1
+		 * set GPIO1_OR.21 = 1
+		 */
+		gpio_reg = in32(GPIO1_TCR);
+		out32(GPIO1_TCR, gpio_reg | 0x00000400);
+
+		gpio_reg = in32(GPIO1_OR);
+		out32(GPIO1_OR,  gpio_reg | 0x00000400);
+
+
+
+
+		/* Read Version ID */
+		cram_id = (volatile u32) in32(CRAM_BANK0_BASE+CRAM_DIDR);
+		udelay(100000);
+
+		asm volatile("	sync");
+		asm volatile("	eieio");
+
+		debug("Cram ID: %X ", cram_id);
+
+		switch (cram_id) {
+		case MICRON_MT45W8MW16BGX_CRAM_ID:
+		case MICRON_MT45W8MW16BGX_CRAM_ID2:
+			/* supported CRAM vendor/part */
+			break;
+		case CRAM_DEVID_NOT_SUPPORTED:
+		default:
+			/* check for DIDR Vendor ID of Micron */
+			if ((cram_id & CRAM_DIDR_VENDOR_ID_MASK) ==
+						MICRON_DIDR_VENDOR_ID)
+			{
+				/* supported CRAM vendor */
+				break;
+			}
+			/* this is not CRAM or not supported CRAM vendor/part */
+			cram_id = 0;
+			/*
+			 * reset the GPIO registers to the values that were
+			 * there before this routine
+			 */
+			out32(GPIO0_TCR, gpio_TCR);
+			out32(GPIO0_OSRL, gpio_OSRL);
+			out32(GPIO0_OR, gpio_OR);
+			out32(GPIO0_ISR1L, gpio_ISR1L);
+			break;
+		}
+	}
+
+	return cram_id;
+}
+
+static long int cram_init(u32 already_inited)
+{
+	volatile u32 tmp_reg;
+	u32 cram_wr_val;
+
+	if (already_inited == 0) return 0;
+
+	/*
+	 * If CRAM is initialized already, then don't reinitialize it again.
+	 * In the case of NAND boot and SPI boot, CRAM will already be
+	 * initialized by the pre-loader
+	 */
+	if (already_inited != 1)
+	{
+		/*
+		 * #o CRAM Card
+		 * #  - CRAMCRE @reg16 = 1; for CRAM to use
+		 * #  - CRAMCRE @reg16 = 0; for CRAM to program
+		 *
+		 * # enable CRAM SEL, move from setEPLD.cmd
+		 * set EPLD0_MUX_CTL.OECRAM = 0
+		 * set EPLD0_MUX_CTL.CRAMCR = 1
+		 * set EPLD0_ETHRSTBOOT.SLCRAM = 0
+		 * #end
+		 */
+
+
+		/*
+		 * #1. EBC need to program READY, CLK, ADV for ASync mode
+		 * # config output
+		 */
+
+		/*
+		 * # CRAM CLOCK
+		 * set GPIO0_TCR.G8 = 1
+		 * set GPIO0_OSRL.G8 = 0
+		 * set GPIO0_OR.G8 = 0
+		 */
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg | 0x00800000);
+		tmp_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, tmp_reg & 0xffffbfff);
+		tmp_reg = in32(GPIO0_OR);
+		out32(GPIO0_OR, tmp_reg & 0xff7fffff);
+
+		/*
+		 * # CRAM Addreaa Valid
+		 * set GPIO0_TCR.G10 = 1
+		 * set GPIO0_OSRL.G10 = 0
+		 * set GPIO0_OR.G10 = 0
+		 */
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg | 0x00200000);
+		tmp_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, tmp_reg & 0xfffffbff);
+		tmp_reg = in32(GPIO0_OR);
+		out32(GPIO0_OR, tmp_reg & 0xffdfffff);
+
+		/*
+		 * # config input (EBC_WAIT)
+		 * set GPIO0_ISR1L.G9 = 1
+		 * set GPIO0_TCR.G9 = 0
+		 */
+		tmp_reg = in32(GPIO0_ISR1L);
+		out32(GPIO0_ISR1L, tmp_reg | 0x00001000);
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg & 0xffbfffff);
+
+		/*
+		 * # config CS4 from GPIO
+		 * set GPIO0_TCR.G0 = 1
+		 * set GPIO0_OSRL.G0 = 1
+		 */
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg | 0x80000000);
+		tmp_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, tmp_reg | 0x40000000);
+
+		/*
+		 * #2. EBC in Async mode
+		 * # set EBC0_PB1AP = 0x078f0ec0
+		 * set EBC0_PB1AP = 0x078f1ec0
+		 * set EBC0_PB2AP = 0x078f1ec0
+		 */
+		mtebc(pb1ap, 0x078F1EC0);
+		mtebc(pb2ap, 0x078F1EC0);
+
+		/*
+		 * #set EBC0_PB1CR = 0x000bc000
+		 * #enable CS2 for CRAM
+		 * set EBC0_PB2CR = 0x020bc000
+		 */
+		mtebc(pb1cr, 0x000BC000);
+		mtebc(pb2cr, 0x020BC000);
+
+		/*
+		 * #3. set CRAM in Sync mode
+		 * #exec cm_bcr_write.cmd { 0x701f }
+		 * #3. set CRAM in Sync mode (full drv strength)
+		 * exec cm_bcr_write.cmd { 0x701F }
+		 */
+		cram_wr_val = 0x7012;	/* CRAM burst setting */
+		cram_bcr_write(cram_wr_val);
+
+		/*
+		 * #4. EBC in Sync mode
+		 * #set EBC0_PB1AP = 0x9f800fc0
+		 * #set EBC0_PB1AP = 0x900001c0
+		 * set EBC0_PB2AP = 0x9C0201c0
+		 * set EBC0_PB2AP = 0x9C0201c0
+		 */
+		mtebc(pb1ap, 0x9C0201C0);
+		mtebc(pb2ap, 0x9C0201C0);
+
+		/*
+		 * #5. EBC need to program READY, CLK, ADV for Sync mode
+		 * # config output
+		 * set GPIO0_TCR.G8 = 1
+		 * set GPIO0_OSRL.G8 = 1
+		 * set GPIO0_TCR.G10 = 1
+		 * set GPIO0_OSRL.G10 = 1
+		 */
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg | 0x00800000);
+		tmp_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, tmp_reg | 0x00004000);
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg | 0x00200000);
+		tmp_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, tmp_reg | 0x00000400);
+
+		/*
+		 * # config input
+		 * set GPIO0_ISR1L.G9 = 1
+		 * set GPIO0_TCR.G9 = 0
+		 */
+		tmp_reg = in32(GPIO0_ISR1L);
+		out32(GPIO0_ISR1L, tmp_reg | 0x00001000);
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg & 0xffbfffff);
+
+		/*
+		 * # config EBC to use RDY
+		 * set SDR0_ULTRA0.EBCREN = 1
+		 */
+		mfsdr(sdrultra0, tmp_reg);
+		mtsdr(sdrultra0, tmp_reg | 0x04000000);
+
+		/*
+		 * set EPLD0_MUX_CTL.OESPR3 = 0
+		 */
+
+
+		mtspr(SPRG7, LOAK_CRAM);	/* "CRAM" */
+	} /* if (already_inited != 1) */
+
+	return (64 * 1024 * 1024);
+}
+
+/******
+ * return 0 if not PSRAM
+ * return 1 if is PSRAM
+ ******/
+static int is_psram(u32 addr)
+{
+	u32 test_pattern = 0xdeadbeef;
+	volatile u32 readback;
+
+	if (addr == CFG_SDRAM_BASE) {
+		/* This is to temp enable OE for PSRAM */
+		out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f);
+		udelay(10000);
+	}
+
+	out32(addr, test_pattern);
+	asm volatile("	sync");
+	asm volatile("	eieio");
+
+	readback = (volatile u32) in32(addr);
+	asm volatile("	sync");
+	asm volatile("	eieio");
+	if (readback == test_pattern) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static long int psram_init(void)
+{
+	u32 readback;
+	long psramsize = 0;
+	int i;
+
+	/* This is to temp enable OE for PSRAM */
+	out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f);
+	udelay(10000);
+
+	/*
+	 * PSRAM bank 1: read then write to address 0x00000000
+	 */
+	for (i = 0; i < 100; i++) {
+		if (is_psram(CFG_SDRAM_BASE + (i*256)) == 1) {
+			readback = PSRAM_PASS;
+		} else {
+			readback = PSRAM_FAIL;
+			break;
+		}
+	}
+	if (readback == PSRAM_PASS) {
+		debug("psram_init(bank0): pass\n");
+		psramsize = (16 * 1024 * 1024);
+	} else {
+		debug("psram_init(bank0): fail\n");
+		return 0;
+	}
+
+#if 0
+	/*
+	 * PSRAM bank 1: read then write to address 0x01000000
+	 */
+	for (i = 0; i < 100; i++) {
+		if (is_psram((1 << 24) + (i*256)) == 1) {
+			readback = PSRAM_PASS;
+		} else {
+			readback = PSRAM_FAIL;
+			break;
+		}
+	}
+	if (readback == PSRAM_PASS) {
+		debug("psram_init(bank1): pass\n");
+		psramsize = psramsize + (16 * 1024 * 1024);
+	}
+#endif
+
+	mtspr(SPRG7, LOAK_PSRAM);	/* "PSRA" - PSRAM */
+
+	return psramsize;
+}
+
+long int initdram(int board_type)
+{
+	long int sram_size;
+	u32 cram_inited;
+
+	/* Determine Attached Memory Expansion Card*/
+	cram_inited = is_cram();
+	if (cram_inited != 0) {					/* CRAM */
+		debug("CRAM Expansion Card attached\n");
+		sram_size = cram_init(cram_inited);
+	} else if (is_psram(CFG_SDRAM_BASE+4) == 1) {		/* PSRAM */
+		debug("PSRAM Expansion Card attached\n");
+		sram_size = psram_init();
+	} else { 						/* no SRAM */
+		debug("No Memory Card Attached!!\n");
+		sram_size = 0;
+	}
+
+	return sram_size;
+}
+
+int testdram(void)
+{
+	return (0);
+}
diff --git a/board/amcc/acadia/u-boot.lds b/board/amcc/acadia/u-boot.lds
new file mode 100644
index 0000000..be03092
--- /dev/null
+++ b/board/amcc/acadia/u-boot.lds
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}