[PATCH] Update AMCC Yucca 440SPe eval board support

The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
inititializition. This includes DDR auto calibration and support
for different DIMM modules, instead of the fixed setup used in
the earlier version.

Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 2 insertions, 314 deletions

diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index e9b34dd..90eaab1 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -44,8 +44,6 @@ int compare_to_true(char *str );
 char *remove_l_w_space(char *in_str );
 char *remove_t_w_space(char *in_str );
 int get_console_port(void);
-unsigned long ppcMfcpr(unsigned long cpr_reg);
-unsigned long ppcMfsdr(unsigned long sdr_reg);
 
 int ppc440spe_init_pcie_rootport(int port);
 void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
@@ -221,7 +219,7 @@ int board_early_init_f (void)
 	 |
 	 +-------------------------------------------------------------------*/
 	/* Read Pin Strap Register in PPC440SP */
-	sdr0_pinstp = ppcMfsdr(SDR0_PINSTP);
+	mfsdr(SDR0_PINSTP, sdr0_pinstp);
 	bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK;
 
 	switch (bootstrap_settings) {
@@ -246,7 +244,7 @@ int board_early_init_f (void)
 			 * Boot Settings in IIC EEprom address 0x50 or 0x54
 			 * Read Serial Device Strap Register1 in PPC440SPe
 			 */
-			sdr0_sdstp1 = ppcMfsdr(SDR0_SDSTP1);
+			mfsdr(SDR0_SDSTP1, sdr0_sdstp1);
 			boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK;
 			ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK;
 
@@ -564,277 +562,6 @@ int checkboard (void)
 	return 0;
 }
 
-static long int yucca_probe_for_dimms(void)
-{
-	int 	dimm_installed[MAXDIMMS];
-	int	dimm_num, result;
-	int	dimms_found = 0;
-	uchar	dimm_addr = IIC0_DIMM0_ADDR;
-	uchar   dimm_spd_data[MAX_SPD_BYTES];
-
-	for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
-		/* check if there is a chip at the dimm address	*/
-		switch (dimm_num) {
-			case 0:
-				dimm_addr = IIC0_DIMM0_ADDR;
-				break;
-			case 1:
-				dimm_addr = IIC0_DIMM1_ADDR;
-				break;
-		}
-
-		result = i2c_probe(dimm_addr);
-
-		memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char));
-		if (result == 0) {
-			/* read first byte of SPD data, if there is any data */
-			result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1);
-
-			if (result == 0) {
-				result = dimm_spd_data[0];
-				result = result > MAX_SPD_BYTES ?
-						MAX_SPD_BYTES : result;
-				result = i2c_read(dimm_addr, 0, 1,
-							dimm_spd_data, result);
-			}
-		}
-
-		if ((result == 0) &&
-		    (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) {
-			dimm_installed[dimm_num] = TRUE;
-			dimms_found++;
-			debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
-		} else {
-			dimm_installed[dimm_num] = FALSE;
-			debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num);
-		}
-	}
-
-	if (dimms_found == 0) {
-		printf("ERROR - No memory installed.  Install a DDR-SDRAM DIMM.\n\n");
-		hang();
-	}
-
-	if (dimm_installed[0] != TRUE) {
-		printf("\nERROR - DIMM slot 0 must be populated before DIMM slot 1.\n");
-		printf("        Unsupported configuration. Move DIMM module from DIMM slot 1 to slot 0.\n\n");
-		hang();
-	}
-
-	return dimms_found;
-}
-
-/*************************************************************************
- * init SDRAM controller with fixed value
- * the initialization values are for 2x MICRON DDR2
- * PN: MT18HTF6472DY-53EB2
- * 512MB, DDR2, 533, CL4, ECC, REG
- ************************************************************************/
-static long int fixed_sdram(void)
-{
-	long int yucca_dimms = 0;
-
-	yucca_dimms = yucca_probe_for_dimms();
-
-	/* SDRAM0_MCOPT2 (0X21) Clear DCEN BIT	*/
-	mtdcr( 0x10, 0x00000021 );
-	mtdcr( 0x11, 0x84000000 );
-
-	/* SDRAM0_MCOPT1 (0X20) ECC OFF / 64 bits / 4 banks / DDR2	*/
-	mtdcr( 0x10, 0x00000020 );
-	mtdcr( 0x11, 0x2D122000 );
-
-	/* SET MCIF0_CODT   Die Termination On	*/
-	mtdcr( 0x10, 0x00000026 );
-	if (yucca_dimms == 2)
-		mtdcr( 0x11, 0x2A800021 );
-	else if (yucca_dimms == 1)
-		mtdcr( 0x11, 0x02800021 );
-
-	/* On-Die Termination for Bank 0	*/
-	mtdcr( 0x10, 0x00000022 );
-	if (yucca_dimms == 2)
-		mtdcr( 0x11, 0x18000000 );
-	else if (yucca_dimms == 1)
-		mtdcr( 0x11, 0x06000000 );
-
-	/*	On-Die Termination for Bank 1	*/
-	mtdcr( 0x10, 0x00000023 );
-	if (yucca_dimms == 2)
-		mtdcr( 0x11, 0x18000000 );
-	else if (yucca_dimms == 1)
-		mtdcr( 0x11, 0x01800000 );
-
-	/*	On-Die Termination for Bank 2	*/
-	mtdcr( 0x10, 0x00000024 );
-	if (yucca_dimms == 2)
-		mtdcr( 0x11, 0x01800000 );
-	else if (yucca_dimms == 1)
-		mtdcr( 0x11, 0x00000000 );
-
-	/*	On-Die Termination for Bank 3	*/
-	mtdcr( 0x10, 0x00000025 );
-	if (yucca_dimms == 2)
-		mtdcr( 0x11, 0x01800000 );
-	else if (yucca_dimms == 1)
-		mtdcr( 0x11, 0x00000000 );
-
-	/* Refresh Time register (0x30) Refresh every 7.8125uS	*/
-	mtdcr( 0x10, 0x00000030 );
-	mtdcr( 0x11, 0x08200000 );
-
-	/* SET MCIF0_MMODE  	 CL 4	*/
-	mtdcr( 0x10, 0x00000088 );
-	mtdcr( 0x11, 0x00000642 );
-
-	/* MCIF0_MEMODE	*/
-	mtdcr( 0x10, 0x00000089 );
-	mtdcr( 0x11, 0x00000004 );
-
-	/*SET MCIF0_MB0CF 	*/
-	mtdcr( 0x10, 0x00000040 );
-	mtdcr( 0x11, 0x00000201 );
-
-	/* SET MCIF0_MB1CF 	*/
-	mtdcr( 0x10, 0x00000044 );
-	mtdcr( 0x11, 0x00000201 );
-
-	/* SET MCIF0_MB2CF 	*/
-	mtdcr( 0x10, 0x00000048 );
-	if (yucca_dimms == 2)
-		mtdcr( 0x11, 0x00000201 );
-	else if (yucca_dimms == 1)
-		mtdcr( 0x11, 0x00000000 );
-
-	/* SET MCIF0_MB3CF 	*/
-	mtdcr( 0x10, 0x0000004c );
-	if (yucca_dimms == 2)
-		mtdcr( 0x11, 0x00000201 );
-	else if (yucca_dimms == 1)
-		mtdcr( 0x11, 0x00000000 );
-
-	/* SET MCIF0_INITPLR0  # NOP		*/
-	mtdcr( 0x10, 0x00000050 );
-	mtdcr( 0x11, 0xB5380000 );
-
-	/* SET MCIF0_INITPLR1  # PRE		*/
-	mtdcr( 0x10, 0x00000051 );
-	mtdcr( 0x11, 0x82100400 );
-
-	/* SET MCIF0_INITPLR2  # EMR2		*/
-	mtdcr( 0x10, 0x00000052 );
-	mtdcr( 0x11, 0x80820000 );
-
-	/* SET MCIF0_INITPLR3  # EMR3		*/
-	mtdcr( 0x10, 0x00000053 );
-	mtdcr( 0x11, 0x80830000 );
-
-	/* SET MCIF0_INITPLR4  # EMR DLL ENABLE	*/
-	mtdcr( 0x10, 0x00000054 );
-	mtdcr( 0x11, 0x80810000 );
-
-	/* SET MCIF0_INITPLR5  # MR DLL RESET	*/
-	mtdcr( 0x10, 0x00000055 );
-	mtdcr( 0x11, 0x80800542 );
-
-	/* SET MCIF0_INITPLR6  # PRE		*/
-	mtdcr( 0x10, 0x00000056 );
-	mtdcr( 0x11, 0x82100400 );
-
-	/* SET MCIF0_INITPLR7  # Refresh	*/
-	mtdcr( 0x10, 0x00000057 );
-	mtdcr( 0x11, 0x8A080000 );
-
-	/* SET MCIF0_INITPLR8  # Refresh	*/
-	mtdcr( 0x10, 0x00000058 );
-	mtdcr( 0x11, 0x8A080000 );
-
-	/* SET MCIF0_INITPLR9  # Refresh	*/
-	mtdcr( 0x10, 0x00000059 );
-	mtdcr( 0x11, 0x8A080000 );
-
-	/* SET MCIF0_INITPLR10 # Refresh	*/
-	mtdcr( 0x10, 0x0000005A );
-	mtdcr( 0x11, 0x8A080000 );
-
-	/* SET MCIF0_INITPLR11 # MR		*/
-	mtdcr( 0x10, 0x0000005B );
-	mtdcr( 0x11, 0x80800442 );
-
-	/* SET MCIF0_INITPLR12 # EMR OCD Default*/
-	mtdcr( 0x10, 0x0000005C );
-	mtdcr( 0x11, 0x80810380 );
-
-	/* SET MCIF0_INITPLR13 # EMR OCD Exit	*/
-	mtdcr( 0x10, 0x0000005D );
-	mtdcr( 0x11, 0x80810000 );
-
-	/* 0x80: Adv Addr clock by 180 deg	*/
-	mtdcr( 0x10, 0x00000080 );
-	mtdcr( 0x11, 0x80000000 );
-
-	/* 0x21: Exit self refresh, set DC_EN	*/
-	mtdcr( 0x10, 0x00000021 );
-	mtdcr( 0x11, 0x28000000 );
-
-	/* 0x81: Write DQS Adv 90 + Fractional DQS Delay	*/
-	mtdcr( 0x10, 0x00000081 );
-	mtdcr( 0x11, 0x80000800 );
-
-	/* MCIF0_SDTR1	*/
-	mtdcr( 0x10, 0x00000085 );
-	mtdcr( 0x11, 0x80201000 );
-
-	/* MCIF0_SDTR2	*/
-	mtdcr( 0x10, 0x00000086 );
-	mtdcr( 0x11, 0x42103242 );
-
-	/* MCIF0_SDTR3	*/
-	mtdcr( 0x10, 0x00000087 );
-	mtdcr( 0x11, 0x0C100D14 );
-
-	/* SET MQ0_B0BAS  base addr 00000000 / 256MB	*/
-	mtdcr( 0x40, 0x0000F800 );
-
-	/* SET MQ0_B1BAS  base addr 10000000 / 256MB	*/
-	mtdcr( 0x41, 0x0400F800 );
-
-	/* SET MQ0_B2BAS  base addr 20000000 / 256MB	*/
-	if (yucca_dimms == 2)
-		mtdcr( 0x42, 0x0800F800 );
-	else if (yucca_dimms == 1)
-		mtdcr( 0x42, 0x00000000 );
-
-	/* SET MQ0_B3BAS  base addr 30000000 / 256MB	*/
-	if (yucca_dimms == 2)
-		mtdcr( 0x43, 0x0C00F800 );
-	else if (yucca_dimms == 1)
-		mtdcr( 0x43, 0x00000000 );
-
-	/* SDRAM_RQDC	*/
-	mtdcr( 0x10, 0x00000070 );
-	mtdcr( 0x11, 0x8000003F );
-
-	/* SDRAM_RDCC	*/
-	mtdcr( 0x10, 0x00000078 );
-	mtdcr( 0x11, 0x80000000 );
-
-	/* SDRAM_RFDC	*/
-	mtdcr( 0x10, 0x00000074 );
-	mtdcr( 0x11, 0x00000220 );
-
-	return (yucca_dimms * 512) << 20;
-}
-
-long int initdram (int board_type)
-{
-	long dram_size = 0;
-
-	dram_size = fixed_sdram();
-
-	return dram_size;
-}
-
 #if defined(CFG_DRAM_TEST)
 int testdram (void)
 {
@@ -1267,42 +994,3 @@ int onboard_pci_arbiter_selected(int core_pci)
 #endif
 	return (BOARD_OPTION_NOT_SELECTED);
 }
-
-/*---------------------------------------------------------------------------+
- | ppcMfcpr.
- +---------------------------------------------------------------------------*/
-unsigned long ppcMfcpr(unsigned long cpr_reg)
-{
-	unsigned long msr;
-	unsigned long cpr_cfgaddr_temp;
-	unsigned long cpr_value;
-
-	msr = (mfmsr () & ~(MSR_EE));
-	cpr_cfgaddr_temp =  mfdcr(CPR0_CFGADDR);
-	mtdcr(CPR0_CFGADDR, cpr_reg);
-	cpr_value =  mfdcr(CPR0_CFGDATA);
-	mtdcr(CPR0_CFGADDR, cpr_cfgaddr_temp);
-	mtmsr(msr);
-
-	return (cpr_value);
-}
-
-/*----------------------------------------------------------------------------+
-| Indirect Access of the System DCR's (SDR)
-| ppcMfsdr
-+----------------------------------------------------------------------------*/
-unsigned long ppcMfsdr(unsigned long sdr_reg)
-{
-	unsigned long msr;
-	unsigned long sdr_cfgaddr_temp;
-	unsigned long sdr_value;
-
-	msr = (mfmsr () & ~(MSR_EE));
-	sdr_cfgaddr_temp =  mfdcr(SDR0_CFGADDR);
-	mtdcr(SDR0_CFGADDR, sdr_reg);
-	sdr_value =  mfdcr(SDR0_CFGDATA);
-	mtdcr(SDR0_CFGADDR, sdr_cfgaddr_temp);
-	mtmsr(msr);
-
-	return (sdr_value);
-}