Merge branch 'master' into hpc2

1 files changed, 0 insertions, 549 deletions

diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
deleted file mode 100644
index 04f58e0..0000000
--- a/board/amcc/yellowstone/yellowstone.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-#include <spd_sdram.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-int board_early_init_f(void)
-{
-	register uint reg;
-
-	/*--------------------------------------------------------------------
-	 * Setup the external bus controller/chip selects
-	 *-------------------------------------------------------------------*/
-	mtdcr(ebccfga, xbcfg);
-	reg = mfdcr(ebccfgd);
-	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
-
-	/*--------------------------------------------------------------------
-	 * Setup the GPIO pins
-	 *-------------------------------------------------------------------*/
-	/*CPLD cs */
-	/*setup Address lines for flash size 64Meg. */
-	out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000);
-
-	/*setup emac */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
-	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
-	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
-
-	/*UART1 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
-	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
-	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
-
-	/* external interrupts IRQ0...3 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000);
-	out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00);
-	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500);
-
-#if 0 /* test-only */
-	/*setup USB 2.0 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
-	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
-	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
-	out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
-#endif
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-	mtdcr(uic0er, 0x00000000);	/* disable all */
-	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
-	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
-	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
-	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-	mtdcr(uic1er, 0x00000000);	/* disable all */
-	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
-	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-
-	/*--------------------------------------------------------------------
-	 * Setup other serial configuration
-	 *-------------------------------------------------------------------*/
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);	/* PCI arbiter enabled */
-	mtsdr(sdr_pfc0, 0x00003e00);	/* Pin function */
-	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins */
-
-	/*clear tmrclk divisor */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
-
-	/*enable ethernet */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
-
-#if 0 /* test-only */
-	/*enable usb 1.1 fs device and remove usb 2.0 reset */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
-#endif
-
-	/*get rid of flash write protect */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	uint pbcr;
-	int size_val = 0;
-
-	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	switch (gd->bd->bi_flashsize) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	case 32 << 20:
-		size_val = 5;
-		break;
-	case 64 << 20:
-		size_val = 6;
-		break;
-	case 128 << 20:
-		size_val = 7;
-		break;
-	}
-	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(ebccfga, pb0cr);
-	mtdcr(ebccfgd, pbcr);
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-	u8 rev;
-	u8 val;
-
-	printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
-
-	rev = *(u8 *)(CFG_CPLD + 0);
-	val = *(u8 *)(CFG_CPLD + 5) & 0x01;
-	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
-
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-/*************************************************************************
- *  sdram_init -- doesn't use serial presence detect.
- *
- *  Assumes:    256 MB, ECC, non-registered
- *              PLB @ 133 MHz
- *
- ************************************************************************/
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-void sdram_tr1_set(int ram_address, int* tr1_value)
-{
-	int i;
-	int j, k;
-	volatile unsigned int* ram_pointer =  (unsigned int*)ram_address;
-	int first_good = -1, last_bad = 0x1ff;
-
-	unsigned long test[NUM_TRIES] = {
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
-	/* go through all possible SDRAM0_TR1[RDCT] values */
-	for (i=0; i<=0x1ff; i++) {
-		/* set the current value for TR1 */
-		mtsdram(mem_tr1, (0x80800800 | i));
-
-		/* write values */
-		for (j=0; j<NUM_TRIES; j++) {
-			ram_pointer[j] = test[j];
-
-			/* clear any cache at ram location */
-			__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-		}
-
-		/* read values back */
-		for (j=0; j<NUM_TRIES; j++) {
-			for (k=0; k<NUM_READS; k++) {
-				/* clear any cache at ram location */
-				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
-				if (ram_pointer[j] != test[j])
-					break;
-			}
-
-			/* read error */
-			if (k != NUM_READS) {
-				break;
-			}
-		}
-
-		/* we have a SDRAM0_TR1[RDCT] that is part of the window */
-		if (j == NUM_TRIES) {
-			if (first_good == -1)
-				first_good = i;		/* found beginning of window */
-		} else { /* bad read */
-			/* if we have not had a good read then don't care */
-			if(first_good != -1) {
-				/* first failure after a good read */
-				last_bad = i-1;
-				break;
-			}
-		}
-	}
-
-	/* return the current value for TR1 */
-	*tr1_value = (first_good + last_bad) / 2;
-}
-
-void sdram_init(void)
-{
-	register uint reg;
-	int tr1_bank1, tr1_bank2;
-
-	/*--------------------------------------------------------------------
-	 * Setup some default
-	 *------------------------------------------------------------------*/
-	mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */
-	mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
-	mtsdram(mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
-	mtsdram(mem_clktr, 0x40000000);	/* ?? */
-	mtsdram(mem_wddctr, 0x40000000);	/* ?? */
-
-	/*clear this first, if the DDR is enabled by a debugger
-	  then you can not make changes. */
-	mtsdram(mem_cfg0, 0x00000000);	/* Disable EEC */
-
-	/*--------------------------------------------------------------------
-	 * Setup for board-specific specific mem
-	 *------------------------------------------------------------------*/
-	/*
-	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
-	 */
-	mtsdram(mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
-	mtsdram(mem_b1cr, 0x080a4001);	/* SDBA=0x080 128MB, Mode 3, enabled */
-
-	mtsdram(mem_tr0, 0x410a4012);	/* ?? */
-	mtsdram(mem_rtr, 0x04080000);	/* ?? */
-	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
-	mtsdram(mem_cfg0, 0x30000000);	/* Disable EEC */
-	udelay(400);		/* Delay 200 usecs (min)            */
-
-	/*--------------------------------------------------------------------
-	 * Enable the controller, then wait for DCEN to complete
-	 *------------------------------------------------------------------*/
-	mtsdram(mem_cfg0, 0x80000000);	/* Enable */
-
-	for (;;) {
-		mfsdram(mem_mcsts, reg);
-		if (reg & 0x80000000)
-			break;
-	}
-
-	sdram_tr1_set(0x00000000, &tr1_bank1);
-	sdram_tr1_set(0x08000000, &tr1_bank2);
-	mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) );
-}
-
-/*************************************************************************
- *  long int initdram
- *
- ************************************************************************/
-long int initdram(int board)
-{
-	sdram_init();
-	return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024);	/* return bytes */
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram(void)
-{
-	unsigned long *mem = (unsigned long *)0;
-	const unsigned long kend = (1024 / sizeof(unsigned long));
-	unsigned long k, n;
-
-	mtmsr(0);
-
-	for (k = 0; k < CFG_KBYTES_SDRAM;
-	     ++k, mem += (1024 / sizeof(unsigned long))) {
-		if ((k & 1023) == 0) {
-			printf("%3d MB\r", k / 1024);
-		}
-
-		memset(mem, 0xaaaaaaaa, 1024);
-		for (n = 0; n < kend; ++n) {
-			if (mem[n] != 0xaaaaaaaa) {
-				printf("SDRAM test fails at: %08x\n",
-				       (uint) & mem[n]);
-				return 1;
-			}
-		}
-
-		memset(mem, 0x55555555, 1024);
-		for (n = 0; n < kend; ++n) {
-			if (mem[n] != 0x55555555) {
-				printf("SDRAM test fails at: %08x\n",
-				       (uint) & mem[n]);
-				return 1;
-			}
-		}
-	}
-	printf("SDRAM test passes\n");
-	return 0;
-}
-#endif
-
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
- *
- *	Different boards may wish to customize the pci controller structure
- *	(add regions, override default access routines, etc) or perform
- *	certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
-int pci_pre_init(struct pci_controller *hose)
-{
-	unsigned long addr;
-
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB3 devices to 0.
-	  | Set PLB3 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
-
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB4 devices to 0.
-	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
-
-	/*-------------------------------------------------------------------------+
-	  | Set Nebula PLB4 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
-	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
-
-	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
-
-	return 1;
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
-
-/*************************************************************************
- *  pci_target_init
- *
- *	The bootstrap configuration provides default settings for the pci
- *	inbound map (PIM). But the bootstrap config choices are limited and
- *	may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller *hose)
-{
-	/*--------------------------------------------------------------------------+
-	 * Set up Direct MMIO registers
-	 *--------------------------------------------------------------------------*/
-	/*--------------------------------------------------------------------------+
-	  | PowerPC440 EP PCI Master configuration.
-	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
-	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
-	  |   Use byte reversed out routines to handle endianess.
-	  | Make this region non-prefetchable.
-	  +--------------------------------------------------------------------------*/
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
-
-	/*--------------------------------------------------------------------------+
-	 * Set up Configuration registers
-	 *--------------------------------------------------------------------------*/
-
-	/* Program the board's subsystem id/vendor id */
-	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
-
-	/* Configure command register as bus master */
-	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
-
-	/* 240nS PCI clock */
-	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
-
-	/* No error reporting */
-	pci_write_config_word(0, PCI_ERREN, 0);
-
-	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
-
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-
-/*************************************************************************
- *  pci_master_init
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
-void pci_master_init(struct pci_controller *hose)
-{
-	unsigned short temp_short;
-
-	/*--------------------------------------------------------------------------+
-	  | Write the PowerPC440 EP PCI Configuration regs.
-	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
-	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
-	  +--------------------------------------------------------------------------*/
-	pci_read_config_word(0, PCI_COMMAND, &temp_short);
-	pci_write_config_word(0, PCI_COMMAND,
-			      temp_short | PCI_COMMAND_MASTER |
-			      PCI_COMMAND_MEMORY);
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
-
-/*************************************************************************
- *  is_pci_host
- *
- *	This routine is called to determine if a pci scan should be
- *	performed. With various hardware environments (especially cPCI and
- *	PPMC) it's insufficient to depend on the state of the arbiter enable
- *	bit in the strap register, or generic host/adapter assumptions.
- *
- *	Rather than hard-code a bad assumption in the general 440 code, the
- *	440 pci code requires the board to decide at runtime.
- *
- *	Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
-	/* Bamboo is always configured as host. */
-	return (1);
-}
-#endif				/* defined(CONFIG_PCI) */
-
-/*************************************************************************
- *  hw_watchdog_reset
- *
- *	This routine is called to reset (keep alive) the watchdog timer
- *
- ************************************************************************/
-#if defined(CONFIG_HW_WATCHDOG)
-void hw_watchdog_reset(void)
-{
-
-}
-#endif
-
-void board_reset(void)
-{
-	/* give reset to BCSR */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
-}