Merge with /home/sr/git/u-boot

1 files changed, 111 insertions, 0 deletions

diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c
new file mode 100644
index 0000000..9fca0a6
--- /dev/null
+++ b/board/amcc/walnut/walnut.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+	/*-------------------------------------------------------------------------+
+	  | Interrupt controller setup for the Walnut/Sycamore board.
+	  | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
+	  |       IRQ 16    405GP internally generated; active low; level sensitive
+	  |       IRQ 17-24 RESERVED
+	  |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
+	  |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
+	  |       IRQ 27 (EXT IRQ 2) Not Used
+	  |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
+	  |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+	  |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
+	  |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
+	  | Note for Walnut board:
+	  |       An interrupt taken for the FPGA (IRQ 25) indicates that either
+	  |       the Mouse, Keyboard, IRDA, or External Expansion caused the
+	  |       interrupt. The FPGA must be read to determine which device
+	  |       caused the interrupt. The default setting of the FPGA clears
+	  |
+	  +-------------------------------------------------------------------------*/
+
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000020);	/* set all but FPGA SMI to be non-critical */
+	mtdcr(uicpr, 0xFFFFFFE0);	/* set int polarities */
+	mtdcr(uictr, 0x10000000);	/* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	/* set UART1 control to select CTS/RTS */
+#define FPGA_BRDC       0xF0300004
+	*(volatile char *)(FPGA_BRDC) |= 0x1;
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	unsigned char *s = getenv("serial#");
+	uint pvr = get_pvr();
+
+	if (pvr == PVR_405GPR_RB) {
+		puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
+	} else {
+		puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
+	}
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
+ */
+void sdram_init(void)
+{
+	return;
+}
+
+/*
+ * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+ * the necessary info for SDRAM controller configuration
+ */
+long int initdram(int board_type)
+{
+	return spd_sdram(0);
+}
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("test: xxx MB - ok\n");
+
+	return (0);
+}