diff options
| author | Jeffrey Mann <mannj@embeddedplanet.com> | 2007-05-16 13:23:10 +0200 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2007-05-16 13:23:10 +0200 |
| commit | ada4697d0230d6da552867777f98a67ec3ba2579 (patch) | |
| tree | 3ea2461ad185be97bd9d39d812f14f44a107d579 /board/amcc/sequoia | |
| parent | 61936667e86a250ae12fd2dc189d3588f0a59e0b (diff) | |
| download | u-boot-imx-ada4697d0230d6da552867777f98a67ec3ba2579.zip u-boot-imx-ada4697d0230d6da552867777f98a67ec3ba2579.tar.gz u-boot-imx-ada4697d0230d6da552867777f98a67ec3ba2579.tar.bz2 | |
[PATCH] Run new sequoia boards with an EBC speed of 83MHz
Because the Sequoia board does not boot with an EBC faster than 66MHz,
the clock divider are changed after the initial boot process.
This allows for maximum clocking speeds to be achieved on newer boards.
Sequoia boards with 666.66 MHz processors require that the EBC divider
be set to 3 in order to start the initial boot process at a slower EBC
speed. After the initial boot process, the divider can be set back to 2,
which will cause the boards to run at 83.333MHz. This is backward
compatible with boards with 533.33 MHz processors, as these boards will
already be set with an EBC divider of 2.
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Diffstat (limited to 'board/amcc/sequoia')
| -rw-r--r-- | board/amcc/sequoia/sequoia.c | 10 |
1 files changed, 8 insertions, 2 deletions
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 930fa71..8704014 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -132,6 +132,12 @@ int board_early_init_f(void) (0x80000000 >> (28 + CFG_NAND_CS)); mtsdr(SDR0_CUST0, sdr0_cust0); + /* Update EBC speed after booting from i2c bootstrap settings + * on newer boards with 33.333 MHZ Clocks + */ + if (in8(CFG_BCSR_BASE + 3) & 0x80) + mtcpr(0xe0, 0x02000000); + return 0; } @@ -363,8 +369,8 @@ int checkboard(void) printf("Board: Rainier - AMCC PPC440GRx Evaluation Board"); #endif - rev = *(u8 *)(CFG_BCSR_BASE + 0); - val = *(u8 *)(CFG_BCSR_BASE + 5) & 0x01; + rev = in8(CFG_BCSR_BASE + 0); + val = in8(CFG_BCSR_BASE + 5) & 0x01; printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); if (s != NULL) { |