diff options
| author | Stefan Roese <sr@denx.de> | 2009-05-11 13:46:14 +0200 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2009-06-12 20:39:47 +0200 |
| commit | d873133f2ba9bd613d5f6552c31cc70fb13f15d3 (patch) | |
| tree | 01a00655040050e5125ef15a24e01e605eb02ec6 /board/amcc/sequoia/sequoia.c | |
| parent | 837db3d87f4bfe9261629fb4a1bb433506a3056a (diff) | |
| download | u-boot-imx-d873133f2ba9bd613d5f6552c31cc70fb13f15d3.zip u-boot-imx-d873133f2ba9bd613d5f6552c31cc70fb13f15d3.tar.gz u-boot-imx-d873133f2ba9bd613d5f6552c31cc70fb13f15d3.tar.bz2 | |
ppc4xx: Add Sequoia RAM-booting target
This patch adds another build target for the AMCC Sequoia PPC440EPx
eval board. This RAM-booting version is targeted for boards without
NOR FLASH (NAND booting) which need a possibility to initially
program their NAND FLASH. Using a JTAG debugger (e.g. BDI2000/3000)
configured to setup the SDRAM, this debugger can load this RAM-
booting image to the target address in SDRAM (in this case 0x1000000)
and start it there. Then U-Boot's standard NAND commands can be
used to program the NAND FLASH (e.g. "nand write ...").
Here the commands to load and start this image from the BDI2000:
440EPX>reset halt
440EPX>load 0x1000000 /tftpboot/sequoia/u-boot.bin
440EPX>go 0x1000000
Please note that this image automatically scans for an already
initialized SDRAM TLB (detected by EPN=0). This TLB will not be
cleared. This TLB doesn't need to be TLB #0, this RAM-booting
version will detect it and preserve it. So booting via BDI2000
will work and booting with a complete different TLB init via
U-Boot works as well.
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/amcc/sequoia/sequoia.c')
| -rw-r--r-- | board/amcc/sequoia/sequoia.c | 10 |
1 files changed, 8 insertions, 2 deletions
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index e824b8f..246ad94 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -33,7 +33,9 @@ DECLARE_GLOBAL_DATA_PTR; +#if !defined(CONFIG_SYS_NO_FLASH) extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ +#endif extern void __ft_board_setup(void *blob, bd_t *bd); ulong flash_get_size(ulong base, int banknum); @@ -122,16 +124,19 @@ int board_early_init_f(void) int misc_init_r(void) { +#if !defined(CONFIG_SYS_NO_FLASH) uint pbcr; int size_val = 0; - u32 reg; +#endif #ifdef CONFIG_440EPX unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; char *act = getenv("usbact"); #endif + u32 reg; +#if !defined(CONFIG_SYS_NO_FLASH) /* Re-do flash sizing to get full correct info */ /* adjust flash start and offset */ @@ -171,6 +176,7 @@ int misc_init_r(void) CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]); #endif +#endif /* CONFIG_SYS_NO_FLASH */ /* * USB suff... @@ -515,7 +521,7 @@ int post_hotkeys_pressed(void) } #endif /* CONFIG_POST */ -#if defined(CONFIG_NAND_U_BOOT) +#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_SYS_RAMBOOT) /* * On NAND-booting sequoia, we need to patch the chips select numbers * in the dtb (CS0 - NAND, CS3 - NOR) |