summaryrefslogtreecommitdiff
path: root/board/amcc/katmai/katmai.c
diff options
context:
space:
mode:
authorGrzegorz Bernacki <gjb@semihalf.com>2007-09-07 18:20:23 +0200
committerRafal Jaworowski <raj@semihalf.com>2007-09-07 18:20:23 +0200
commit7f1913938984ef6c6a46cb53e003719196d9c5de (patch)
tree127789e73caeb3464c9941c1f96440031b1e3f6c /board/amcc/katmai/katmai.c
parent15ee4734e4e08003d73d9ead3ca80e2a0672e427 (diff)
downloadu-boot-imx-7f1913938984ef6c6a46cb53e003719196d9c5de.zip
u-boot-imx-7f1913938984ef6c6a46cb53e003719196d9c5de.tar.gz
u-boot-imx-7f1913938984ef6c6a46cb53e003719196d9c5de.tar.bz2
[PPC440SPe] Improve PCIe configuration space access
- correct configuration space mapping - correct bus numbering - better access to config space Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the first device on the first bus. We now allow to configure up to 16 buses; also, scanning for devices behind the PCIe-PCIe bridge is supported, so peripheral devices farther in hierarchy can be identified. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Diffstat (limited to 'board/amcc/katmai/katmai.c')
-rw-r--r--board/amcc/katmai/katmai.c9
1 files changed, 5 insertions, 4 deletions
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index b804d55..a9ae4a3 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -392,7 +392,7 @@ int katmai_pcie_card_present(int port)
static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
-void pcie_setup_hoses(void)
+void pcie_setup_hoses(int busno)
{
struct pci_controller *hose;
int i, bus;
@@ -401,7 +401,7 @@ void pcie_setup_hoses(void)
* assume we're called after the PCIX hose is initialized, which takes
* bus ID 0 and therefore start numbering PCIe's from 1.
*/
- bus = 1;
+ bus = busno;
for (i = 0; i <= 2; i++) {
/* Check for katmai card presence */
if (!katmai_pcie_card_present(i))
@@ -418,8 +418,8 @@ void pcie_setup_hoses(void)
hose = &pcie_hose[i];
hose->first_busno = bus;
- hose->last_busno = bus;
- bus++;
+ hose->last_busno = bus;
+ hose->current_busno = bus;
/* setup mem resource */
pci_set_region(hose->regions + 0,
@@ -443,6 +443,7 @@ void pcie_setup_hoses(void)
* Config access can only go down stream
*/
hose->last_busno = pci_hose_scan(hose);
+ bus = hose->last_busno + 1;
#endif
}
}