Major cleanup for AMCC PPC4xx eval boards.

Patch by Stefan Roese, 01 Aug 2005

1 files changed, 297 insertions, 0 deletions

diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c
new file mode 100644
index 0000000..f6bb837
--- /dev/null
+++ b/board/amcc/ebony/ebony.c
@@ -0,0 +1,297 @@
+/*
+ *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+#define BOOT_SMALL_FLASH	32	/* 00100000 */
+#define FLASH_ONBD_N		2	/* 00000010 */
+#define FLASH_SRAM_SEL		1	/* 00000001 */
+
+long int fixed_sdram(void);
+
+int board_early_init_f(void)
+{
+	uint reg;
+	unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+	unsigned char status;
+
+	/*--------------------------------------------------------------------
+	 * Setup the external bus controller/chip selects
+	 *-------------------------------------------------------------------*/
+	mtdcr(ebccfga, xbcfg);
+	reg = mfdcr(ebccfgd);
+	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
+
+	mtebc(pb1ap, 0x02815480);	/* NVRAM/RTC */
+	mtebc(pb1cr, 0x48018000);	/* BA=0x480 1MB R/W 8-bit */
+	mtebc(pb7ap, 0x01015280);	/* FPGA registers */
+	mtebc(pb7cr, 0x48318000);	/* BA=0x483 1MB R/W 8-bit */
+
+	/* read FPGA_REG0  and set the bus controller */
+	status = *fpga_base;
+	if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) {
+		mtebc(pb0ap, 0x9b015480);	/* FLASH/SRAM */
+		mtebc(pb0cr, 0xfff18000);	/* BAS=0xfff 1MB R/W 8-bit */
+		mtebc(pb2ap, 0x9b015480);	/* 4MB FLASH */
+		mtebc(pb2cr, 0xff858000);	/* BAS=0xff8 4MB R/W 8-bit */
+	} else {
+		mtebc(pb0ap, 0x9b015480);	/* 4MB FLASH */
+		mtebc(pb0cr, 0xffc58000);	/* BAS=0xffc 4MB R/W 8-bit */
+
+		/* set CS2 if FLASH_ONBD_N == 0 */
+		if (!(status & FLASH_ONBD_N)) {
+			mtebc(pb2ap, 0x9b015480);	/* FLASH/SRAM */
+			mtebc(pb2cr, 0xff818000);	/* BAS=0xff8 4MB R/W 8-bit */
+		}
+	}
+
+	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000009);	/* SMI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
+	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
+	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
+	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
+	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	sys_info_t sysinfo;
+	unsigned char *s = getenv("serial#");
+
+	get_sys_info(&sysinfo);
+
+	printf("Board: Ebony - AMCC PPC440GP Evaluation Board");
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+	printf("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+	return (0);
+}
+
+long int initdram(int board_type)
+{
+	long dram_size = 0;
+
+#if defined(CONFIG_SPD_EEPROM)
+	dram_size = spd_sdram(0);
+#else
+	dram_size = fixed_sdram();
+#endif
+	return dram_size;
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+	uint *pstart = (uint *) 0x00000000;
+	uint *pend = (uint *) 0x08000000;
+	uint *p;
+
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+	return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ *
+ *  Assumes:    128 MB, non-ECC, non-registered
+ *              PLB @ 133 MHz
+ *
+ ************************************************************************/
+long int fixed_sdram(void)
+{
+	uint reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup some default
+	 *------------------------------------------------------------------*/
+	mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */
+	mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
+	mtsdram(mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
+	mtsdram(mem_wddctr, 0x00000000);	/* wrcp=0 dcd=0                 */
+	mtsdram(mem_clktr, 0x40000000);	/* clkp=1 (90 deg wr) dcdt=0    */
+
+	/*--------------------------------------------------------------------
+	 * Setup for board-specific specific mem
+	 *------------------------------------------------------------------*/
+	/*
+	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
+	 */
+	mtsdram(mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
+	mtsdram(mem_tr0, 0x410a4012);	/* WR=2  WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+	/* RA=10 RD=3                       */
+	mtsdram(mem_tr1, 0x8080082f);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
+	mtsdram(mem_rtr, 0x08200000);	/* Rate 15.625 ns @ 133 MHz PLB     */
+	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
+	udelay(400);		/* Delay 200 usecs (min)            */
+
+	/*--------------------------------------------------------------------
+	 * Enable the controller, then wait for DCEN to complete
+	 *------------------------------------------------------------------*/
+	mtsdram(mem_cfg0, 0x86000000);	/* DCEN=1, PMUD=1, 64-bit           */
+	for (;;) {
+		mfsdram(mem_mcsts, reg);
+		if (reg & 0x80000000)
+			break;
+	}
+
+	return (128 * 1024 * 1024);	/* 128 MB                           */
+}
+#endif				/* !defined(CONFIG_SPD_EEPROM) */
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *	Different boards may wish to customize the pci controller structure
+ *	(add regions, override default access routines, etc) or perform
+ *	certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+	unsigned long strap;
+
+	/*--------------------------------------------------------------------------+
+     *	The ebony board is always configured as the host & requires the
+     *	PCI arbiter to be enabled.
+	 *--------------------------------------------------------------------------*/
+	strap = mfdcr(cpc0_strp1);
+	if ((strap & 0x00100000) == 0) {
+		printf("PCI: CPC0_STRP1[PAE] not set.\n");
+		return 0;
+	}
+
+	return 1;
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ *  pci_target_init
+ *
+ *	The bootstrap configuration provides default settings for the pci
+ *	inbound map (PIM). But the bootstrap config choices are limited and
+ *	may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/*--------------------------------------------------------------------------+
+	 * Disable everything
+	 *--------------------------------------------------------------------------*/
+	out32r(PCIX0_PIM0SA, 0);	/* disable */
+	out32r(PCIX0_PIM1SA, 0);	/* disable */
+	out32r(PCIX0_PIM2SA, 0);	/* disable */
+	out32r(PCIX0_EROMBA, 0);	/* disable expansion rom */
+
+	/*--------------------------------------------------------------------------+
+	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+     * options to not support sizes such as 128/256 MB.
+	 *--------------------------------------------------------------------------*/
+	out32r(PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+	out32r(PCIX0_PIM0LAH, 0);
+	out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
+
+	out32r(PCIX0_BAR0, 0);
+
+	/*--------------------------------------------------------------------------+
+	 * Program the board's subsystem id/vendor id
+	 *--------------------------------------------------------------------------*/
+	out16r(PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
+	out16r(PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
+
+	out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ *  is_pci_host
+ *
+ *	This routine is called to determine if a pci scan should be
+ *	performed. With various hardware environments (especially cPCI and
+ *	PPMC) it's insufficient to depend on the state of the arbiter enable
+ *	bit in the strap register, or generic host/adapter assumptions.
+ *
+ *	Rather than hard-code a bad assumption in the general 440 code, the
+ *	440 pci code requires the board to decide at runtime.
+ *
+ *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+	/* The ebony board is always configured as host. */
+	return (1);
+}
+#endif				/* defined(CONFIG_PCI) */