Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

5 files changed, 30 insertions, 28 deletions

diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index 8b82ea4..8d79be2 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -31,24 +31,24 @@ static void acadia_gpio_init(void)
 	/*
 	 * GPIO0 setup (select GPIO or alternate function)
 	 */
-	out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
-	out32(GPIO0_OSRH, CFG_GPIO0_OSRH);	/* output select */
-	out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
-	out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H);	/* input select */
-	out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
-	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);	/* three-state select */
-	out32(GPIO0_TCR, CFG_GPIO0_TCR);  /* enable output driver for outputs */
+	out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
+	out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH);	/* output select */
+	out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
+	out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H);	/* input select */
+	out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
+	out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH);	/* three-state select */
+	out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR);  /* enable output driver for outputs */
 
 	/*
 	 * Ultra (405EZ) was nice enough to add another GPIO controller
 	 */
-	out32(GPIO1_OSRH, CFG_GPIO1_OSRH);	/* output select */
-	out32(GPIO1_OSRL, CFG_GPIO1_OSRL);
-	out32(GPIO1_ISR1H, CFG_GPIO1_ISR1H);	/* input select */
-	out32(GPIO1_ISR1L, CFG_GPIO1_ISR1L);
-	out32(GPIO1_TSRH, CFG_GPIO1_TSRH);	/* three-state select */
-	out32(GPIO1_TSRL, CFG_GPIO1_TSRL);
-	out32(GPIO1_TCR, CFG_GPIO1_TCR);  /* enable output driver for outputs */
+	out32(GPIO1_OSRH, CONFIG_SYS_GPIO1_OSRH);	/* output select */
+	out32(GPIO1_OSRL, CONFIG_SYS_GPIO1_OSRL);
+	out32(GPIO1_ISR1H, CONFIG_SYS_GPIO1_ISR1H);	/* input select */
+	out32(GPIO1_ISR1L, CONFIG_SYS_GPIO1_ISR1L);
+	out32(GPIO1_TSRH, CONFIG_SYS_GPIO1_TSRH);	/* three-state select */
+	out32(GPIO1_TSRL, CONFIG_SYS_GPIO1_TSRL);
+	out32(GPIO1_TCR, CONFIG_SYS_GPIO1_TCR);  /* enable output driver for outputs */
 }
 
 int board_early_init_f(void)
@@ -68,7 +68,7 @@ int board_early_init_f(void)
 	mtsdr(sdrnand0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
 	mfsdr(sdrultra0, reg);
 	reg &= ~SDR_ULTRA0_CSN_MASK;
-	reg |= (SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS) |
+	reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) |
 		SDR_ULTRA0_NDGPIOBP |
 		SDR_ULTRA0_EBCRDYEN |
 		SDR_ULTRA0_NFSRSTEN;
@@ -91,7 +91,7 @@ int board_early_init_f(void)
 int misc_init_f(void)
 {
 	/* Set EPLD to take PHY out of reset */
-	out8(CFG_CPLD_BASE + 0x05, 0x00);
+	out8(CONFIG_SYS_CPLD_BASE + 0x05, 0x00);
 	udelay(100000);
 
 	return 0;
@@ -105,7 +105,7 @@ int checkboard(void)
 	char *s = getenv("serial#");
 	u8 rev;
 
-	rev = in8(CFG_CPLD_BASE + 0);
+	rev = in8(CONFIG_SYS_CPLD_BASE + 0);
 	printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev);
 
 	if (s != NULL) {
diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
index fb7ea35..052cf61 100644
--- a/board/amcc/acadia/cmd_acadia.c
+++ b/board/amcc/acadia/cmd_acadia.c
@@ -84,7 +84,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (i2c_write(chip, 0, 1, buf, 16) != 0)
 		printf("Error writing to EEPROM at address 0x%x\n", chip);
-	udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+	udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 	if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0)
 		printf("Error2 writing to EEPROM at address 0x%x\n", chip);
 
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
index 48a6725..3e5c80e 100644
--- a/board/amcc/acadia/memory.c
+++ b/board/amcc/acadia/memory.c
@@ -39,7 +39,7 @@ static void cram_bcr_write(u32 wr_val)
 	wr_val <<= 2;
 
 	/* set CRAM_CRE to 1 */
-	gpio_write_bit(CFG_GPIO_CRAM_CRE, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 1);
 
 	/* Write BCR to CRAM on CS1 */
 	out32(wr_val + 0x00200000, 0);
@@ -53,7 +53,7 @@ static void cram_bcr_write(u32 wr_val)
 	eieio();
 
 	/* set CRAM_CRE back to 0 (normal operation) */
-	gpio_write_bit(CFG_GPIO_CRAM_CRE, 0);
+	gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 0);
 
 	return;
 }
@@ -75,10 +75,10 @@ phys_size_t initdram(int board_type)
 	u32 val;
 
 	/* 1. EBC need to program READY, CLK, ADV for ASync mode */
-	gpio_config(CFG_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CFG_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CFG_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CFG_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG);
 
 	/* 2. EBC in Async mode */
 	mtebc(pb1ap, 0x078F1EC0);
@@ -94,8 +94,8 @@ phys_size_t initdram(int board_type)
 	mtebc(pb2ap, 0x9C0201C0);
 
 	/* Set GPIO pins back to alternate function */
-	gpio_config(CFG_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
-	gpio_config(CFG_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
 
 	/* Config EBC to use RDY */
 	mfsdr(sdrultra0, val);
@@ -106,5 +106,5 @@ phys_size_t initdram(int board_type)
 		;
 #endif
 
-	return (CFG_MBYTES_RAM << 20);
+	return (CONFIG_SYS_MBYTES_RAM << 20);
 }
diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds
index cbdc0b0..799c28f 100644
--- a/board/amcc/acadia/u-boot-nand.lds
+++ b/board/amcc/acadia/u-boot-nand.lds
@@ -57,7 +57,7 @@ SECTIONS
 
     /* Align to next NAND block */
     . = ALIGN(0x4000);
-    common/environment.o  (.ppcenv)
+    common/env_embedded.o  (.ppcenv)
     /* Keep some space here for redundant env and potential bad env blocks */
     . = ALIGN(0x10000);
 
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/amcc/acadia/u-boot.lds b/board/amcc/acadia/u-boot.lds
index d52b51a..fd5f3df 100644
--- a/board/amcc/acadia/u-boot.lds
+++ b/board/amcc/acadia/u-boot.lds
@@ -130,6 +130,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);