ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board

This patch adds NAND booting support for the AMCC Acadia eval board.

Please make sure to configure jumper J7 to position 2-3 when booting
from NOR, and to position 1-2 when booting for NAND.

I also added a board command to configure the I2C bootstrap EEPROM
values. Right now only 267MHz is support for booting either via NOR
or NAND FLASH. Here the usage:

=> bootstrap 267 nor	;to configure the board for 267MHz NOR booting
=> bootstrap 267 nand	;to configure the board for 267MHz NNAND booting

Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 101 insertions, 0 deletions

diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
new file mode 100644
index 0000000..fb7ea35
--- /dev/null
+++ b/board/amcc/acadia/cmd_acadia.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+
+static u8 boot_267_nor[] = {
+	0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0x00,
+	0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00
+};
+
+static u8 boot_267_nand[] = {
+	0xd0, 0x38, 0xc3, 0x50, 0x13, 0x88, 0x8e, 0x00,
+	0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00
+};
+
+static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	u8 chip;
+	u8 *buf;
+	int cpu_freq;
+
+	if (argc < 3) {
+		printf("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	cpu_freq = simple_strtol(argv[1], NULL, 10);
+	if (cpu_freq != 267) {
+		printf("Unsupported cpu-frequency - only 267 supported\n");
+		return 1;
+	}
+
+	/* use 0x50 as I2C EEPROM address for now */
+	chip = 0x50;
+
+	if ((strcmp(argv[2], "nor") != 0) &&
+	    (strcmp(argv[2], "nand") != 0)) {
+		printf("Unsupported boot-device - only nor|nand support\n");
+		return 1;
+	}
+
+	if (strcmp(argv[2], "nand") == 0) {
+		switch (cpu_freq) {
+		case 267:
+			buf = boot_267_nand;
+			break;
+		default:
+			break;
+		}
+	} else {
+		switch (cpu_freq) {
+		case 267:
+			buf = boot_267_nor;
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (i2c_write(chip, 0, 1, buf, 16) != 0)
+		printf("Error writing to EEPROM at address 0x%x\n", chip);
+	udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+	if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0)
+		printf("Error2 writing to EEPROM at address 0x%x\n", chip);
+
+	printf("Done\n");
+	printf("Please power-cycle the board for the changes to take effect\n");
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	bootstrap,	3,	0,	do_bootstrap,
+	"bootstrap - program the I2C bootstrap EEPROM\n",
+	"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
+	);