powerpc: adder: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC8xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

1 files changed, 0 insertions, 108 deletions

diff --git a/board/adder/adder.c b/board/adder/adder.c
deleted file mode 100644
index 2ee7096..0000000
--- a/board/adder/adder.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright (C) 2004-2005 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Analogue&Micro Adder boards family.
- * Tested on AdderII and Adder87x.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#if defined(CONFIG_OF_LIBFDT)
-	#include <libfdt.h>
-#endif
-
-/*
- * SDRAM is single Samsung K4S643232F-T70   chip (8MB)
- *       or single Micron  MT48LC4M32B2TG-7 chip (16MB).
- * Minimal CPU frequency is 40MHz.
- */
-static uint sdram_table[] = {
-	/* Single read	(offset 0x00 in UPM RAM) */
-	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00,
-	0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04,
-
-	/* Burst read	(offset 0x08 in UPM RAM) */
-	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00,
-	0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44,
-	0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35,
-	0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35,
-
-	/* Single write (offset 0x18 in UPM RAM) */
-	0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47,
-	0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-	/* Burst write	(offset 0x20 in UPM RAM) */
-	0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
-	0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-	/* Refresh	(offset 0x30 in UPM RAM) */
-	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-	/* Exception	(offset 0x3C in UPM RAM) */
-	0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04
-};
-
-phys_size_t initdram (int board_type)
-{
-	long int msize;
-	volatile immap_t     *immap  = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
-
-	/* Configure SDRAM refresh */
-	memctl->memc_mptpr = MPTPR_PTP_DIV32; /* BRGCLK/32 */
-
-	memctl->memc_mamr = (94 << 24) | CONFIG_SYS_MAMR; /* No refresh */
-	udelay(200);
-
-	/* Run precharge from location 0x15 */
-	memctl->memc_mar = 0x0;
-	memctl->memc_mcr = 0x80002115;
-	udelay(200);
-
-	/* Run 8 refresh cycles */
-	memctl->memc_mcr = 0x80002830;
-	udelay(200);
-
-	/* Run MRS pattern from location 0x16 */
-	memctl->memc_mar = 0x88;
-	memctl->memc_mcr = 0x80002116;
-	udelay(200);
-
-	memctl->memc_mamr |=  MAMR_PTAE; /* Enable refresh */
-	memctl->memc_or1   = ~(CONFIG_SYS_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
-	memctl->memc_br1   =  CONFIG_SYS_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
-
-	msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_MAX_SIZE);
-	memctl->memc_or1  |= ~(msize - 1);
-
-	return msize;
-}
-
-int checkboard( void )
-{
-	puts("Board: Adder");
-#if defined(CONFIG_MPC885_FAMILY)
-	puts("87x\n");
-#elif defined(CONFIG_MPC866_FAMILY)
-	puts("II\n");
-#endif
-
-	return 0;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-}
-#endif