ARM: IXP: Remove actux3 board

The board is unmaintained, just like the rest of the IXP.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Michael Schwingen <michael@schwingen.org>
Cc: Tom Rini <trini@ti.com>

1 files changed, 0 insertions, 149 deletions

diff --git a/board/actux3/actux3.c b/board/actux3/actux3.c
deleted file mode 100644
index 09c803c..0000000
--- a/board/actux3/actux3.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <asm/arch/ixp425.h>
-#include <asm/io.h>
-#include <miiphy.h>
-#include "actux3_hw.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	/* CS1: IPAC-X */
-	writel(0x94d10013, IXP425_EXP_CS1);
-	/* CS5: Debug port */
-	writel(0x9d520003, IXP425_EXP_CS5);
-	/* CS6: Release/Option register */
-	writel(0x81860001, IXP425_EXP_CS6);
-	/* CS7: LEDs */
-	writel(0x80900003, IXP425_EXP_CS7);
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x00000100;
-
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_ETHRST);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DSR);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DCD);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED5_GN);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED6_RT);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED6_GN);
-
-	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST);
-	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_ETHRST);
-
-	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DSR);
-	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DCD);
-
-	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED5_GN);
-	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED6_RT);
-	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED6_GN);
-
-	/*
-	 * Setup GPIO's for Interrupt inputs
-	 */
-	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DBGINT);
-	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_ETHINT);
-
-	/*
-	 * Setup GPIO's for 33MHz clock output
-	 */
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
-	writel(0x011001FF, IXP425_GPIO_GPCLKR);
-
-	/* we need a minimum PCI reset pulse width after enabling the clock */
-	udelay(533);
-	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST);
-	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_ETHRST);
-
-	ACTUX3_LED1_RT(1);
-	ACTUX3_LED1_GN(0);
-	ACTUX3_LED2_RT(0);
-	ACTUX3_LED2_GN(0);
-	ACTUX3_LED3_RT(0);
-	ACTUX3_LED3_GN(0);
-	ACTUX3_LED4_GN(0);
-	ACTUX3_LED5_RT(0);
-
-	return 0;
-}
-
-/*
- * Check Board Identity
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	puts("Board: AcTux-3 rev.");
-	putc(ACTUX3_BOARDREL + 'A' - 1);
-
-	if (i > 0) {
-		puts (", serial# ");
-		puts (buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-/*************************************************************************
- * get_board_rev() - setup to pass kernel board revision information
- * 0 = reserved
- * 1 = Rev. A
- * 2 = Rev. B
- *************************************************************************/
-u32 get_board_rev(void)
-{
-	return ACTUX3_BOARDREL;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20);
-	return 0;
-}
-
-void reset_phy(void)
-{
-	int i;
-
-	/* initialize the PHY */
-	miiphy_reset("NPE0", CONFIG_PHY_ADDR);
-
-	/* all LED outputs = Link/Act */
-	miiphy_write("NPE0", CONFIG_PHY_ADDR, 0x16, 0x0AAA);
-
-	/*
-	 * The Marvell 88E6060 switch comes up with all ports disabled.
-	 * set all ethernet switch ports to forwarding state
-	*/
-	for (i = 1; i <= 5; i++)
-		miiphy_write("NPE0", CONFIG_PHY_ADDR + 8 + i, 0x04, 0x03);
-
-}