summaryrefslogtreecommitdiff
path: root/board/Seagate/dockstar
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2014-10-22 12:13:11 +0200
committerTom Rini <trini@ti.com>2014-10-23 09:59:21 -0400
commitd5c5132f878394b7487d3f6da0d469aa72737318 (patch)
tree6e0879ddf2c632f0ed23cdbd6250bcf65f75b423 /board/Seagate/dockstar
parent4aceea2088e04724900a9c6f22c48d99293206f2 (diff)
downloadu-boot-imx-d5c5132f878394b7487d3f6da0d469aa72737318.zip
u-boot-imx-d5c5132f878394b7487d3f6da0d469aa72737318.tar.gz
u-boot-imx-d5c5132f878394b7487d3f6da0d469aa72737318.tar.bz2
arm: marvell: Extract kirkwood gpio functions into new common file gpio.c
This makes is possible to use those gpio functions from other MVEBU SoC's as well. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Diffstat (limited to 'board/Seagate/dockstar')
-rw-r--r--board/Seagate/dockstar/dockstar.c8
1 files changed, 4 insertions, 4 deletions
diff --git a/board/Seagate/dockstar/dockstar.c b/board/Seagate/dockstar/dockstar.c
index dc73dfa..838f578 100644
--- a/board/Seagate/dockstar/dockstar.c
+++ b/board/Seagate/dockstar/dockstar.c
@@ -26,9 +26,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(DOCKSTAR_OE_VAL_LOW,
- DOCKSTAR_OE_VAL_HIGH,
- DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
+ mvebu_config_gpio(DOCKSTAR_OE_VAL_LOW,
+ DOCKSTAR_OE_VAL_HIGH,
+ DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
@@ -143,7 +143,7 @@ void reset_phy(void)
static void set_leds(u32 leds, u32 blinking)
{
- struct kwgpio_registers *r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+ struct kwgpio_registers *r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
u32 oe = readl(&r->oe) | BOTH_LEDS;
writel(oe & ~leds, &r->oe); /* active low */
u32 bl = readl(&r->blink_en) & ~BOTH_LEDS;