summaryrefslogtreecommitdiff
path: root/board/RPXlite_dw
diff options
context:
space:
mode:
authorwdenk <wdenk>2005-01-10 00:01:04 +0000
committerwdenk <wdenk>2005-01-10 00:01:04 +0000
commit082acfd4849d2f0471b0709fe7f5ce1de387437d (patch)
tree788768a43fb5160db87797eb1fe44127b81bfa25 /board/RPXlite_dw
parent652a10c0965bcbc64dc88fc54e34bedf1612e66b (diff)
downloadu-boot-imx-082acfd4849d2f0471b0709fe7f5ce1de387437d.zip
u-boot-imx-082acfd4849d2f0471b0709fe7f5ce1de387437d.tar.gz
u-boot-imx-082acfd4849d2f0471b0709fe7f5ce1de387437d.tar.bz2
Coding Style cleanup
Diffstat (limited to 'board/RPXlite_dw')
-rw-r--r--board/RPXlite_dw/README14
1 files changed, 7 insertions, 7 deletions
diff --git a/board/RPXlite_dw/README b/board/RPXlite_dw/README
index 4551718..e88f9aa 100644
--- a/board/RPXlite_dw/README
+++ b/board/RPXlite_dw/README
@@ -38,7 +38,7 @@ make all
To support the Platform better,I added LCD panel(NL6448BC20-08) function.
For the convenience of debug, CONFIG_PERBOOT was supported. So you just
perss ENTER if you want to get a serial console in boot downcounting.
-Then you can switch to LCD and serial console freely just typing
+Then you can switch to LCD and serial console freely just typing
'run lcd' or 'run ser'. They are only vaild when CONFIG_LCD was enabled.
To get a LCD support u-boot,you can do the following:
@@ -93,18 +93,18 @@ In the beginning, you could just need very simple defult environment variable se
like[include/configs/RPXlite.h] :
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
- "bootm"
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "bootm"
-This is enough for kernel NFS test. But as debug process goes on, you would expect
+This is enough for kernel NFS test. But as debug process goes on, you would expect
to save some time on environment variable setting and u-boot/kernel updating.
So the default environment variable setting would become more complicated. Just like
the one I did in include/configs/RPXlite_DW.h.
Two u-boot commands, ku and uu, should be careful to use. They were designed to update
-kernel and u-boot image file respectively. You must tftp your image to default address
+kernel and u-boot image file respectively. You must tftp your image to default address
'100000' and then use them correctly. Yeah, you can create your own command to do this
job. :-) The example u-boot image updating process could be :