doc: cleanup - move board READMEs into respective board directories

Also drop a few files referring to no longer / not yet supported
boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>

1 files changed, 877 insertions, 0 deletions

diff --git a/board/RPXlite/README b/board/RPXlite/README
new file mode 100644
index 0000000..3ca6711
--- /dev/null
+++ b/board/RPXlite/README
@@ -0,0 +1,877 @@
+# Porting U-Boot onto RPXlite board
+# Written by Yoo. Jonghoon
+# E-Mail : yooth@ipone.co.kr
+# IP ONE Inc.
+
+# Since 2001. 1. 29
+
+# Shell : bash
+# Cross-compile tools : Montavista Hardhat
+# Debugging tools : Windriver VisionProbe (PowerPC BDM)
+# ppcboot ver. : ppcboot-0.8.1
+
+###############################################################
+#	1. Hardware setting
+###############################################################
+
+1.1. Board, BDM settings
+	Install board, BDM, connect each other
+
+1.2. Save Register value
+	Boot with board-on monitor program and save the
+	register values with BDM.
+
+1.3. Configure flash programmer
+	Check flash memory area in the memory map.
+	0xFFC00000 - 0xFFFFFFFF
+
+	Boot monitor program is at
+	0xFFF00000
+
+	You can program on-board flash memory with VisionClick
+	flash programmer. Set the target flash device as:
+
+	29DL800B
+
+	(?) The flash memory device in the board *is* 29LV800B,
+		but I cannot program it with '29LV800B' option.
+		(in VisionClick flash programming tools)
+		I don't know why...
+
+1.4. Save boot monitor program *IMPORTANT*
+	Upload boot monitor program from board to file.
+	boot monitor program starts at 0xFFF00000
+
+1.5. Test flash memory programming
+	Try to erase boot program in the flash memory,
+	and re-write them.
+	*WARNING* YOU MUST SAVE BOOT PROGRAM TO FILE
+		BEFORE ERASING FLASH
+
+###############################################################
+#	2. U-Boot setting
+###############################################################
+
+2.1. Download U-Boot tarball at
+	ftp://ftp.denx.de
+	(The latest version is ppcboot-0.8.1.tar.bz2)
+
+	To extract the archive use the following syntax :
+	> bzip2 -cd ppcboot-0.8.1.tar.bz2 | tar xf -
+
+2.2. Add the following lines in '.profile'
+	export PATH=$PATH:/opt/hardhat/devkit/ppc/8xx/bin
+
+2.3. Make board specific config, for example:
+	> cd ppcboot-0.8.1
+	> make TQM860L_config
+
+	Now we can build ppcboot bin files.
+	After make all, you must see these files in your
+	ppcboot root directory.
+
+	ppcboot
+	ppcboot.bin
+	ppcboot.srec
+	ppcboot.map
+
+2.4. Make your own board directory into the
+	ppcboot-0.8.1/board
+	and make your board-specific files here.
+
+	For exmanple, tqm8xx files are composed of
+	.depend : Nothing
+	Makefile : To make config file
+	config.mk : Sets base address
+	flash.c : Flash memory control files
+	ppcboot.lds : linker(ld) script? (I don't know this yet)
+	tqm8xx.c : DRAM control and board check routines
+
+	And, add your board config lines in the
+	ppcboot-0.8.1/Makefile
+
+	Finally, add config_(your board).h file in the
+	ppcboot-0.8.1/include/
+
+	I've made board/rpxlite directory, and just copied
+	tqm8xx settings for now.
+
+	Rebuild ppcboot for rpxlite board:
+	> make rpxlite_config
+	> make
+
+###############################################################
+#	3. U-Boot porting
+###############################################################
+
+3.1. My RPXlite files are based on tqm8xx board files.
+	> cd board
+	> cp -r tqm8xx RPXLITE
+	> cd RPXLITE
+	> mv tqm8xx.c RPXLITE.c
+	> cd ../../include
+	> cp config_tqm8xx.h config_RPXLITE.h
+
+3.2. Modified files are:
+	board/RPXLITE/RPXLITE.c		/* DRAM-related routines */
+	board/RPXLITE/flash.c		/* flash-related routines */
+	board/RPXLITE/config.mk		/* set text base address */
+	arch/powerpc/cpu/mpc8xx/serial.c /* board specific register setting */
+	include/config_RPXLITE.h	/* board specific registers */
+
+	See 'reg_config.txt' for register values in detail.
+
+###############################################################
+#	4. Running Linux
+###############################################################
+
+
+###############################################################
+#	Misc Information
+###############################################################
+
+mem_config.txt:
+===============
+
+Flash memory device : AM29LV800BB (1Mx8Bit) x 4 device
+manufacturer id : 01     (AMD)
+device id       : 5B     (AM29LV800B)
+size            : 4Mbyte
+sector #        : 19
+
+Sector information :
+
+number   start addr.     size
+00       FFC0_0000       64
+01       FFC1_0000       32
+02       FFC1_8000       32
+03       FFC2_0000       128
+04       FFC4_0000       256
+05       FFC8_0000       256
+06       FFCC_0000       256
+07       FFD0_0000       256
+08       FFD4_0000       256
+09       FFD8_0000       256
+10       FFDC_0000       256
+11       FFE0_0000       256
+12       FFE4_0000       256
+13       FFE8_0000       256
+14       FFEC_0000       256
+15       FFF0_0000       256
+16       FFF4_0000       256
+17       FFF8_0000       256
+18       FFFC_0000       256
+
+
+reg_config.txt:
+===============
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	SIU (System Interface Unit) */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+
+
+/*### IMMR */
+/*### Internal Memory Map Register */
+/*### Chap. 11.4.1 */
+
+	ISB		= 0xFA20		/* Set the Immap base = 0xFA20 0000 */
+	PARTNUM = 0x21
+	MASKNUM = 0x00
+
+	=> 0xFA20 2100
+
+---------------------------------------------------------------------
+
+/*### SIUMCR */
+/*### SIU Module Configuration Register */
+/*### Chap. 11.4.2 */
+/*### Offset : 0x0000 0000 */
+
+	EARB	= 0
+	EARP	= 0
+	DSHW	= 0
+	DBGC	= 0
+	DBPC	= 0
+	FRC		= 0
+	DLK		= 0
+	OPAR	= 0
+	PNCS	= 0
+	DPC		= 0
+	MPRE	= 0
+	MLRC	= 10		/* ~KR/~RETRY/~IRQ4/SPKROUT functions as ~KR/~TRTRY */
+	AEME	= 0
+	SEME	= 0
+	BSC		= 0
+	GB5E	= 0
+	B2DD	= 0
+	B3DD	= 0
+
+	=> 0x0000 0800
+
+---------------------------------------------------------------------
+
+/*### SYPCR */
+/*### System Protection Control Register */
+/*### Chap. 11.4.3 */
+/*### Offset : 0x0000 0004 */
+
+	SWTC	= 0xFFFF	/* SW watchdog timer count = 0xFFFF */
+	BMT		= 0x06		/* BUS monitoring timing */
+	BME		= 1			/* BUS monitor enable */
+	SWF		= 1
+	SWE		= 0			/* SW watchdog disable */
+	SWRI	= 0
+	SWP		= 1
+
+	=> 0xFFFF 0689
+
+---------------------------------------------------------------------
+
+/*### TESR */
+/*### Transfer Error Status Register */
+/*### Chap. 11.4.4 */
+/*### Offset : 0x0000 0020 */
+
+	IEXT	= 0
+	ITMT	= 0
+	IPB		= 0000
+	DEXT	= 0
+	DTMT	= 0
+	DPB		= 0000
+
+	=> 0x0000 0000
+
+---------------------------------------------------------------------
+
+/*### SIPEND */
+/*### SIU Interrupt Pending Register */
+/*### Chap. 11.5.4.1 */
+/*### Offset : 0x0000 0010 */
+
+	IRQ0~IRQ7 = 0
+	LVL0~LVL7 = 0
+
+	=> 0x0000 0000
+
+---------------------------------------------------------------------
+
+/*### SIMASK */
+/*### SIU Interrupt Mask Register */
+/*### Chap. 11.5.4.2 */
+/*### Offset : 0x0000 0014 */
+
+	IRM0~IRM7 = 0		/* Mask all interrupts */
+	LVL0~LVL7 = 0
+
+	=> 0x0000 0000
+
+---------------------------------------------------------------------
+
+/*### SIEL */
+/*### SIU Interrupt Edge/Level Register */
+/*### Chap. 11.5.4.3 */
+/*### Offset : 0x0000 0018 */
+
+	ED0~ED7 = 0			/* Low level triggered */
+	WMn0~WMn7 = 0		/* Not allowed to exit from low-power mode */
+
+	=> 0x0000 0000
+
+---------------------------------------------------------------------
+
+/*### SIVEC */
+/*### SIU Interrupt Vector Register */
+/*### Chap. 11.5.4.4 */
+/*### Offset : 0x0000 001C */
+
+	INTC = 3C		/* The lowest interrupt is pending..(?) */
+
+	=> 0x3C00 0000
+
+---------------------------------------------------------------------
+
+/*### SWSR */
+/*### Software Service Register */
+/*### Chap. 11.7.1 */
+/*### Offset : 0x0000 001E */
+
+	SEQ = 0
+
+	=> 0x0000
+
+---------------------------------------------------------------------
+
+/*### SDCR */
+/*### SDMA Configuration Register */
+/*### Chap. 20.2.1 */
+/*### Offset : 0x0000 0032 */
+
+	FRZ = 0
+	RAID = 01	/* Priority level 5 (BR5) (normal operation) */
+
+	=> 0x0000 0001
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	UPMA (User Programmable Machine A) */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+
+/*### Chap. 16.6.4.1 */
+/*### Offset = 0x0000 017c */
+
+	T0  = CFFF CC24		/* Single Read */
+	T1  = 0FFF CC04
+	T2  = 0CAF CC04
+	T3  = 03AF CC08
+	T4  = 3FBF CC27		/* last */
+	T5  = FFFF CC25
+	T6  = FFFF CC25
+	T7  = FFFF CC25
+	T8  = CFFF CC24		/* Burst Read */
+	T9  = 0FFF CC04
+	T10 = 0CAF CC84
+	T11 = 03AF CC88
+	T12 = 3FBF CC27		/* last */
+	T13 = FFFF CC25
+	T14 = FFFF CC25
+	T15 = FFFF CC25
+	T16 = FFFF CC25
+	T17 = FFFF CC25
+	T18 = FFFF CC25
+	T19 = FFFF CC25
+	T20 = FFFF CC25
+	T21 = FFFF CC25
+	T22 = FFFF CC25
+	T23 = FFFF CC25
+	T24 = CFFF CC24		/* Single Write */
+	T25 = 0FFF CC04
+	T26 = 0CFF CC04
+	T27 = 03FF CC00
+	T28 = 3FFF CC27		/* last */
+	T29 = FFFF CC25
+	T30 = FFFF CC25
+	T31 = FFFF CC25
+	T32 = CFFF CC24		/* Burst Write */
+	T33 = 0FFF CC04
+	T34 = 0CFF CC80
+	T35 = 03FF CC8C
+	T36 = 0CFF CC00
+	T37 = 33FF CC27		/* last */
+	T38 = FFFF CC25
+	T39 = FFFF CC25
+	T40 = FFFF CC25
+	T41 = FFFF CC25
+	T42 = FFFF CC25
+	T43 = FFFF CC25
+	T44 = FFFF CC25
+	T45 = FFFF CC25
+	T46 = FFFF CC25
+	T47 = FFFF CC25
+	T48 = C0FF CC24		/* Refresh */
+	T49 = 03FF CC24
+	T50 = 0FFF CC24
+	T51 = 0FFF CC24
+	T52 = 3FFF CC27		/* last */
+	T53 = FFFF CC25
+	T54 = FFFF CC25
+	T55 = FFFF CC25
+	T56 = FFFF CC25
+	T57 = FFFF CC25
+	T58 = FFFF CC25
+	T59 = FFFF CC25
+	T60 = FFFF CC25		/* Exception */
+	T61 = FFFF CC25
+	T62 = FFFF CC25
+	T63 = FFFF CC25
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	UPMB */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+---------------------------------------------------------------------
+
+/*### Chap. 16.6.4.1 */
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	MEMC */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+---------------------------------------------------------------------
+
+/*### BR0 & OR0 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR0(0x0000 0100) & OR0(0x0000 0104) */
+/*### Flash memory */
+
+	BA   = 1111 1110 0000 0000 0	/* Base addr = 0xFE00 0000 */
+	AT   = 000
+	PS   = 00
+	PARE = 0
+	WP   = 0
+	MS   = 0				/* GPCM */
+	V    = 1				/* Valid */
+
+	=> 0xFE00 0001
+
+	AM            = 1111 1110 0000 0000 0	/* 32MBytes */
+	ATM           = 000
+	CSNT/SAM      = 0
+	ACS/G5LA,G5LS = 00
+	BIH           = 1			/* Burst inhibited */
+	SCY           = 0100		/* cycle length = 4 */
+	SETA          = 0
+	TRLX          = 0
+	EHTR          = 0
+
+	=> 0xFE00 0140
+
+/*### BR1 & OR1 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR1(0x0000 0108) & OR1(0x0000 010C) */
+/*### SDRAM */
+
+	BA   = 0000 0000 0000 0000 0	/* Base addr = 0x0000 0000 */
+	AT   = 000
+	PS   = 00
+	PARE = 0
+	WP   = 0
+	MS   = 1				/* UPMA */
+	V    = 1				/* Valid */
+
+	=> 0x0000 0081
+
+	AM            = 1111 1110 0000 0000	/* 32MBytes */
+	ATM           = 000
+	CSNT/SAM      = 1
+	ACS/G5LA,G5LS = 11
+	BIH           = 0
+	SCY           = 0000		/* cycle length = 0 */
+	SETA          = 0
+	TRLX          = 0
+	EHTR          = 0
+
+	=> 0xFE00 0E00
+
+/*### BR2 & OR2 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR2(0x0000 0110) & OR2(0x0000 0114) */
+
+	BR2 & OR2 = 0x0000 0000		/* Not used */
+
+/*### BR3 & OR3 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR3(0x0000 0118) & OR3(0x0000 011C) */
+/*### BCSR */
+
+	BA   = 1111 1010 0100 0000 0	/* Base addr = 0xFA40 0000 */
+	AT   = 000
+	PS   = 00
+	PARE = 0
+	WP   = 0
+	MS   = 0				/* GPCM */
+	V    = 1				/* Valid */
+
+	=> 0xFA40 0001
+
+	AM            = 1111 1111 0111 1111 1	/* (?) */
+	ATM           = 000
+	CSNT/SAM      = 1
+	ACS/G5LA,G5LS = 00
+	BIH           = 1			/* Burst inhibited */
+	SCY           = 0001		/* cycle length = 1 */
+	SETA          = 0
+	TRLX          = 0
+
+	=> 0xFF7F 8910
+
+/*### BR4 & OR4 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR4(0x0000 0120) & OR4(0x0000 0124) */
+/*### NVRAM & SRAM */
+
+	BA   = 1111 1010 0000 0000 0	/* Base addr = 0xFA00 0000 */
+	AT   = 000
+	PS   = 01
+	PARE = 0
+	WP   = 0
+	MS   = 0				/* GPCM */
+	V    = 1				/* Valid */
+
+	=> 0xFA00 0401
+
+	AM            = 1111 1111 1111 1000 0	/* 8MByte */
+	ATM           = 000
+	CSNT/SAM      = 1
+	ACS/G5LA,G5LS = 00
+	BIH           = 1			/* Burst inhibited */
+	SCY           = 0111		/* cycle length = 7 */
+	SETA          = 0
+	TRLX          = 0
+
+	=> 0xFFF8 0970
+
+/*### BR5 & OR5 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR2(0x0000 0128) & OR2(0x0000 012C) */
+
+	BR5 & OR5 = 0x0000 0000		/* Not used */
+
+/*### BR6 & OR6 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR2(0x0000 0130) & OR2(0x0000 0134) */
+
+	BR6 & OR6 = 0x0000 0000		/* Not used */
+
+/*### BR7 & OR7 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR7(0x0000 0138) & OR7(0x0000 013C) */
+
+	BR7 & OR7 = 0x0000 0000		/* Not used */
+
+/*### MAR */
+/*### Memory Address Register */
+/*### Chap. 16.4.7 */
+/*### Offset : 0x0000 0164 */
+
+	MA = External memory address
+
+/*### MCR */
+/*### Memory Command Register */
+/*### Chap. 16.4.5 */
+/*### Offset : 0x0000 0168 */
+
+	OP   = xx			/* Command op code */
+	UM   = 1			/* Select UPMA */
+	MB   = 001			/* Select CS1 */
+	MCLF = xxxx			/* Loop times */
+	MAD  = xx xxxx		/* Memory array index */
+
+/*### MAMR */
+/*### Machine A Mode Register */
+/*### Chap. 16.4.4 */
+/*### Offset : 0x0000 0170 */
+
+	PTA = 0101 1000
+	PTAE = 1			/* Periodic timer A enabled */
+	AMA = 010
+	DSA = 00
+	G0CLA = 000
+	GPLA4DIS = 1
+	RLFA = 0100
+	WLFA = 0011
+	TLFA = 0000
+
+	=> 0x58A0 1430
+
+/*### MBMR */
+/*### Machine B Mode Register */
+/*### Chap. 16.4.4 */
+/*### Offset : 0x0000 0174 */
+
+	PTA = 0100 1110
+	PTAE = 0			/* Periodic timer B disabled */
+	AMA = 000
+	DSA = 00
+	G0CLA = 000
+	GPLA4DIS = 1
+	RLFA = 0000
+	WLFA = 0000
+	TLFA = 0000
+
+	=> 0x4E00 1000
+
+/*### MSTAT */
+/*### Memory Status Register */
+/*### Chap. 16.4.3 */
+/*### Offset : 0x0000 0178 */
+
+	PER0~PER7 = Parity error
+	WPER      = Write protection error
+
+	=> 0x0000
+
+/*### MPTPR */
+/*### Memory Periodic Timer Prescaler Register */
+/*### Chap. 16.4.8 */
+/*### Offset : 0x0000 017A */
+
+	PTP = 0000 1000		/* Divide by 8 */
+
+	=> 0x0800
+
+/*### MDR */
+/*### Memory Data Register */
+/*### Chap. 16.4.6 */
+/*### Offset : 0x0000 017C */
+
+	MD = Memory data contains the RAM array word
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	TIMERS */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+---------------------------------------------------------------------
+
+/*### TBREFx */
+/*### Timebase Reference Registers */
+/*### Chap. 11.9.2 */
+/*### Offset : TBREFF0(0x0000 0204)/TBREFF1(0x0000 0208) */
+/*### (Locked) */
+
+	TBREFF0 = 0xFFFF FFFF
+	TBREFF1 = 0xFFFF FFFF
+
+---------------------------------------------------------------------
+
+/*### TBSCR */
+/*### Timebase Status and Control Registers */
+/*### Chap. 11.9.3 */
+/*### Offset : 0x0000 0200 */
+/*### (Locked) */
+
+	TBIRQ = 00000000
+	REF0  = 0
+	REF1  = 0
+	REFE0 = 0			/* Reference interrupt disable */
+	REFE1 = 0
+	TBF   = 1
+	TBE   = 1			/* Timebase enable */
+
+	=> 0x0003
+
+---------------------------------------------------------------------
+
+/*### RTCSC */
+/*### Real-Time Clock Status and Control Registers */
+/*### Chap. 11.10.1 */
+/*### Offset : 0x0000 0220 */
+/*### (Locked) */
+
+	RTCIRQ = 00000000
+	SEC = 1
+	ALR = 0
+	38K = 0				/* PITRTCLK is driven by 32.768KHz */
+	SIE = 0
+	ALE = 0
+	RTF = 0
+	RTE = 1				/* Real-Time clock enabled */
+
+	=> 0x0081
+
+---------------------------------------------------------------------
+
+/*### RTC */
+/*### Real-Time Clock Registers */
+/*### Chap. 11.10.2 */
+/*### Offset : 0x0000 0224 */
+/*### (Locked) */
+
+	RTC = Real time clock measured in second
+
+---------------------------------------------------------------------
+
+/*### RTCAL */
+/*### Real-Time Clock Alarm Registers */
+/*### Chap. 11.10.3 */
+/*### Offset : 0x0000 022C */
+/*### (Locked) */
+
+	ALARM = 0xFFFF FFFF
+
+---------------------------------------------------------------------
+
+/*### RTSEC */
+/*### Real-Time Clock Alarm Second Registers */
+/*### Chap. 11.10.4 */
+/*### Offset : 0x0000 0228 */
+/*### (Locked) */
+
+	COUNTER = Counter bits(fraction of a second)
+
+---------------------------------------------------------------------
+
+/*### PISCR */
+/*### Periodic Interrupt Status and Control Register */
+/*### Chap. 11.11.1 */
+/*### Offset : 0x0000 0240 */
+/*### (Locked) */
+
+	PIRQ = 0
+	PS   = 0		/* Write 1 to clear */
+	PIE  = 0
+	PITF = 1
+	PTE  = 0		/* PIT disabled */
+
+---------------------------------------------------------------------
+
+/*### PITC */
+/*### PIT Count Register */
+/*### Chap. 11.11.2 */
+/*### Offset : 0x0000 0244 */
+/*### (Locked) */
+
+	PITC = PIT count
+
+---------------------------------------------------------------------
+
+/*### PITR */
+/*### PIT Register */
+/*### Chap. 11.11.3 */
+/*### Offset : 0x0000 0248 */
+/*### (Locked) */
+
+	PIT = PIT count		/* Read only */
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	CLOCKS */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+---------------------------------------------------------------------
+
+
+---------------------------------------------------------------------
+
+/*### SCCR */
+/*### System Clock and Reset Control Register */
+/*### Chap. 15.6.1 */
+/*### Offset : 0x0000 0280 */
+/*### (Locked) */
+
+	COM    = 11		/* Clock output disabled */
+	TBS    = 1		/* Timebase frequency source is GCLK2 divided by 16 */
+	RTDIV  = 0		/* The clock is divided by 4 */
+	RTSEL  = 0		/* OSCM(Crystal oscillator) is selected */
+	CRQEN  = 0
+	PRQEN  = 0
+	EBDF   = 00		/* CLKOUT is GCLK2 divided by 1 */
+	DFSYNC = 00		/* Divided by 1 (normal operation) */
+	DFBRG  = 00		/* Divided by 1 (normal operation) */
+	DFNL   = 000
+	DFNH   = 000
+
+	=> 0x6200 0000
+
+---------------------------------------------------------------------
+
+/*### PLPRCR */
+/*### PLL, Low-Power, and Reset Control Register */
+/*### Chap. 15.6.2 */
+/*### Offset : 0x0000 0284 */
+/*### (Locked) */
+
+	MF    = 0x005	/* 48MHz (?) (  = 8MHz * (MF+1) ) */
+	SPLSS = 0
+	TEXPS = 0
+	TMIST = 0
+	CSRC  = 0		/* The general system clock is generated by the DFNH field */
+	LPM   = 00		/* Normal high/normal low mode */
+	CSR   = 0
+	LOLRE = 0
+	FIOPD = 0
+
+	=> 0x0050 0000
+
+---------------------------------------------------------------------
+
+/*### RSR */
+/*### Reset Status Register */
+/*### Chap. 12.2 */
+/*### Offset : 0x0000 0288 */
+/*### (Locked) */
+
+	EHRS  = External hard reset
+	ESRS  = External soft reset
+	LLRS  = Loss-of-lock reset
+	SWRS  = Software watchdog reset
+	CSRS  = Check stop reset
+	DBHRS = Debug port hard reset
+	DBSRS = Debug port soft reset
+	JTRS  = JTAG reset
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	DMA */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+---------------------------------------------------------------------
+
+/*### SDSR */
+/*### SDMA Status Register */
+/*### Chap. 20.2.2 */
+/*### Offset : 0x0000 0908 */
+
+	SBER = 0	/* SDMA channel bus error */
+	DSP2 = 0	/* DSP chain2 (Tx) interrupt */
+	DSP1 = 0	/* DSP chain1 (Rx) interrupt */
+
+	=> 0x00
+
+/*### SDMR */
+/*### SDMA Mask Register */
+/*### Chap. 20.2.3 */
+/*### Offset : 0x0000 090C */
+
+	SBER = 0
+	DSP2 = 0
+	DSP1 = 0	/* All interrupts are masked */
+
+	=> 0x00
+
+/*### SDAR */
+/*### SDMA Address Register */
+/*### Chap. 20.2.4 */
+/*### Offset : 0x0000 0904 */
+
+	AR = 0xxxxx xxxx	/* current system address */
+
+	=> 0xFA20 23AC
+
+/*### IDSRx */
+/*### IDMA Status Register */
+/*### Chap. 20.3.3.2 */
+/*### Offset : IDSR1(0x0000 0910) & IDSR2(0x0000 0918) */
+
+	AD   = 0
+	DONE = 0
+	OB   = 0
+
+	=> 0x00
+
+/*### IDMRx */
+/*### IDMA Mask Register */
+/*### Chap. 20.3.3.3 */
+/*### Offset : IDMR1(0x0000 0914) & IDMR2(0x0000 091C) */
+
+	AD   = 0
+	DONE = 0
+	OB   = 0