powerpc: remove RPXClassic, RPXlite boards support

Enough time has passed since these boards were moved to Orphan. Remove.

 - Remove board/RPXlite/*
 - Remove board/RPXClassic/*
 - Remove include/configs/RPXlite.h
 - Remove include/configs/RPXClassic.h
 - Clean-up defined(CONFIG_RPXCLASSIC)
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

7 files changed, 0 insertions, 1256 deletions

diff --git a/board/RPXClassic/Makefile b/board/RPXClassic/Makefile
deleted file mode 100644
index 87db754..0000000
--- a/board/RPXClassic/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= RPXClassic.o flash.o eccx.o
diff --git a/board/RPXClassic/README b/board/RPXClassic/README
deleted file mode 100644
index e03f670..0000000
--- a/board/RPXClassic/README
+++ /dev/null
@@ -1,19 +0,0 @@
-# Porting U-Boot onto RPXClassic LF_BW31 board
-# Written by Pierre AUBERT
-# E-Mail  p.aubert@staubli.com
-# Stäubli Faverges - <www.staubli.com>
-#
-# Sept. 20 2001
-#
-# Cross compile: Montavista Hardhat ported on HP-UX 10.20
-#
-
-Flash memories : AM29DL323B (2 banks flash memories) 16 Mb from 0xff000000
-DRAM : 16 Mb from 0
-NVRAM : 512 kb from 0xfa000000
-
-
-- environment is stored in NVRAM
-- Mac address is read from EEPROM
-- ethernet on SCC1 or fast ethernet on FEC are running (depending on the
-  configuration flag CONFIG_FEC_ENET)
diff --git a/board/RPXClassic/RPXClassic.c b/board/RPXClassic/RPXClassic.c
deleted file mode 100644
index 15b7232..0000000
--- a/board/RPXClassic/RPXClassic.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * (C)	Copyright 2001
- * Stäubli Faverges - <www.staubli.com>
- * Pierre AUBERT  p.aubert@staubli.com
- * U-Boot port on RPXClassic LF (CLLF_BW31) board
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <config.h>
-#include <mpc8xx.h>
-#include <net.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-static unsigned char aschex_to_byte (unsigned char *cp);
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_	0xFFFFCC25
-
-const uint sdram_table[] =
-{
-	/*
-	 * Single Read. (Offset 00h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08,
-	0x3FBFCC27, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Read. (Offset 08h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88,
-	0x3FBFCC27, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Single Write. (Offset 18h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00,
-	0x3FFFCC27, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Write. (Offset 20h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C,
-	0x0CFFCC00, 0x33FFCC27, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Refresh. (Offset 30h in UPMA RAM)
-	 */
-	0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24,
-	0x3FFFCC27, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Exception. (Offset 3Ch in UPMA RAM)
-	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	puts ("Board: RPXClassic\n");
-	return (0);
-}
-
-/*-----------------------------------------------------------------------------
- * board_get_enetaddr -- Read the MAC Address in the I2C EEPROM
- *-----------------------------------------------------------------------------
- */
-static void board_get_enetaddr(uchar *enet)
-{
-	int i;
-	char buff[256], *cp;
-
-	/* Initialize I2C					*/
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
-	/* Read 256 bytes in EEPROM				*/
-	i2c_read (0x54, 0, 1, (uchar *)buff, 128);
-	i2c_read (0x54, 128, 1, (uchar *)buff + 128, 128);
-
-	/* Retrieve MAC address in buffer (key EA)		*/
-	for (cp = buff;;) {
-		if (cp[0] == 'E' && cp[1] == 'A') {
-			cp += 3;
-			/* Read MAC address			*/
-			for (i = 0; i < 6; i++, cp += 2) {
-				enet[i] = aschex_to_byte ((unsigned char *)cp);
-			}
-		}
-		/* Scan to the end of the record		*/
-		while ((*cp != '\n') && (*cp != (char)0xff)) {
-			cp++;
-		}
-		/* If the next character is a \n, 0 or ff, we are done.	*/
-		cp++;
-		if ((*cp == '\n') || (*cp == 0) || (*cp == (char)0xff))
-			break;
-	}
-
-#ifdef CONFIG_FEC_ENET
-	/* The MAC address is the same as normal ethernet except the 3rd byte	 */
-	/* (See the E.P. Planet Core Overview manual		*/
-	enet[3] |= 0x80;
-#endif
-
-	printf("MAC address = %pM\n", enet);
-}
-
-int misc_init_r(void)
-{
-	uchar enetaddr[6];
-
-	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-		board_get_enetaddr(enetaddr);
-		eth_setenv_enetaddr("ethaddr", enetaddr);
-	}
-
-	return 0;
-}
-
-void rpxclassic_init (void)
-{
-	/* Enable NVRAM */
-	*((uchar *) BCSR0) |= BCSR0_ENNVRAM;
-
-#ifdef CONFIG_FEC_ENET
-
-	/* Validate the fast ethernet tranceiver                             */
-	*((volatile uchar *) BCSR2) &= ~BCSR2_MIICTL;
-	*((volatile uchar *) BCSR2) &= ~BCSR2_MIIPWRDWN;
-	*((volatile uchar *) BCSR2) |= BCSR2_MIIRST;
-	*((volatile uchar *) BCSR2) |= BCSR2_MIIPWRDWN;
-#endif
-
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size10;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-			   sizeof (sdram_table) / sizeof (uint));
-
-	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	memctl->memc_mar = 0x00000000;
-
-	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80002230;	/* SDRAM bank 0 - refresh twice */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
-	udelay (1000);
-
-	/* Check Bank 0 Memory Size
-	 * try 10 column mode
-	 */
-
-	size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM,
-						SDRAM_MAX_SIZE);
-
-	return (size10);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base, long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size(base, maxsize));
-}
-/*-----------------------------------------------------------------------------
- * aschex_to_byte --
- *-----------------------------------------------------------------------------
- */
-static unsigned char aschex_to_byte (unsigned char *cp)
-{
-	u_char byte, c;
-
-	c = *cp++;
-
-	if ((c >= 'A') && (c <= 'F')) {
-		c -= 'A';
-		c += 10;
-	} else if ((c >= 'a') && (c <= 'f')) {
-		c -= 'a';
-		c += 10;
-	} else {
-		c -= '0';
-	}
-
-	byte = c * 16;
-
-	c = *cp;
-
-	if ((c >= 'A') && (c <= 'F')) {
-		c -= 'A';
-		c += 10;
-	} else if ((c >= 'a') && (c <= 'f')) {
-		c -= 'a';
-		c += 10;
-	} else {
-		c -= '0';
-	}
-
-	byte += c;
-
-	return (byte);
-}
diff --git a/board/RPXClassic/eccx.c b/board/RPXClassic/eccx.c
deleted file mode 100644
index 766a19e..0000000
--- a/board/RPXClassic/eccx.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
- * Pierre AUBERT  p.aubert@staubli.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-/* Video support for the ECCX daughter board                                 */
-
-
-#include <common.h>
-#include <config.h>
-
-#ifdef CONFIG_VIDEO_SED13806
-#include <sed13806.h>
-
-
-/* Screen configurations: the initialization of the SD13806 depends on
-   screen and on display mode. We handle only 8bpp and 16 bpp modes          */
-
-/* ECCX board is supplied with a NEC NL6448BC20 screen                       */
-#ifdef CONFIG_NEC_NL6448BC20
-#define DISPLAY_WIDTH   640
-#define DISPLAY_HEIGHT  480
-
-#ifdef CONFIG_VIDEO_SED13806_8BPP
-static const S1D_REGS init_regs [] =
-{
-    {0x0001,0x00},   /* Miscellaneous Register */
-    {0x01FC,0x00},   /* Display Mode Register */
-    {0x0004,0x1b},   /* General IO Pins Configuration Register 0 */
-    {0x0005,0x00},   /* General IO Pins Configuration Register 1 */
-    {0x0008,0xe5},   /* General IO Pins Control Register 0 */
-    {0x0009,0x1f},   /* General IO Pins Control Register 1 */
-    {0x0010,0x02},   /* Memory Clock Configuration Register */
-    {0x0014,0x10},   /* LCD Pixel Clock Configuration Register */
-    {0x0018,0x02},   /* CRT/TV Pixel Clock Configuration Register */
-    {0x001C,0x02},   /* MediaPlug Clock Configuration Register */
-    {0x001E,0x01},   /* CPU To Memory Wait State Select Register */
-    {0x0021,0x04},   /* DRAM Refresh Rate Register */
-    {0x002A,0x00},   /* DRAM Timings Control Register 0 */
-    {0x002B,0x01},   /* DRAM Timings Control Register 1 */
-    {0x0020,0x80},   /* Memory Configuration Register */
-    {0x0030,0x25},   /* Panel Type Register */
-    {0x0031,0x00},   /* MOD Rate Register */
-    {0x0032,0x4F},   /* LCD Horizontal Display Width Register */
-    {0x0034,0x13},   /* LCD Horizontal Non-Display Period Register */
-    {0x0035,0x01},   /* TFT FPLINE Start Position Register */
-    {0x0036,0x0B},   /* TFT FPLINE Pulse Width Register */
-    {0x0038,0xDF},   /* LCD Vertical Display Height Register 0 */
-    {0x0039,0x01},   /* LCD Vertical Display Height Register 1 */
-    {0x003A,0x2C},   /* LCD Vertical Non-Display Period Register */
-    {0x003B,0x00},   /* TFT FPFRAME Start Position Register */
-    {0x003C,0x01},   /* TFT FPFRAME Pulse Width Register */
-    {0x0040,0x03},   /* LCD Display Mode Register */
-    {0x0041,0x02},   /* LCD Miscellaneous Register */
-    {0x0042,0x00},   /* LCD Display Start Address Register 0 */
-    {0x0043,0x00},   /* LCD Display Start Address Register 1 */
-    {0x0044,0x00},   /* LCD Display Start Address Register 2 */
-    {0x0046,0x40},   /* LCD Memory Address Offset Register 0 */
-    {0x0047,0x01},   /* LCD Memory Address Offset Register 1 */
-    {0x0048,0x00},   /* LCD Pixel Panning Register */
-    {0x004A,0x00},   /* LCD Display FIFO High Threshold Control Register */
-    {0x004B,0x00},   /* LCD Display FIFO Low Threshold Control Register */
-    {0x0050,0x4F},   /* CRT/TV Horizontal Display Width Register */
-    {0x0052,0x13},   /* CRT/TV Horizontal Non-Display Period Register */
-    {0x0053,0x01},   /* CRT/TV HRTC Start Position Register */
-    {0x0054,0x0B},   /* CRT/TV HRTC Pulse Width Register */
-    {0x0056,0xDF},   /* CRT/TV Vertical Display Height Register 0 */
-    {0x0057,0x01},   /* CRT/TV Vertical Display Height Register 1 */
-    {0x0058,0x2B},   /* CRT/TV Vertical Non-Display Period Register */
-    {0x0059,0x09},   /* CRT/TV VRTC Start Position Register */
-    {0x005A,0x01},   /* CRT/TV VRTC Pulse Width Register */
-    {0x005B,0x00},   /* TV Output Control Register */
-    {0x0060,0x03},   /* CRT/TV Display Mode Register */
-    {0x0062,0x00},   /* CRT/TV Display Start Address Register 0 */
-    {0x0063,0x00},   /* CRT/TV Display Start Address Register 1 */
-    {0x0064,0x00},   /* CRT/TV Display Start Address Register 2 */
-    {0x0066,0x40},   /* CRT/TV Memory Address Offset Register 0 */
-    {0x0067,0x01},   /* CRT/TV Memory Address Offset Register 1 */
-    {0x0068,0x00},   /* CRT/TV Pixel Panning Register */
-    {0x006A,0x00},   /* CRT/TV Display FIFO High Threshold Control Register */
-    {0x006B,0x00},   /* CRT/TV Display FIFO Low Threshold Control Register */
-    {0x0070,0x00},   /* LCD Ink/Cursor Control Register */
-    {0x0071,0x00},   /* LCD Ink/Cursor Start Address Register */
-    {0x0072,0x00},   /* LCD Cursor X Position Register 0 */
-    {0x0073,0x00},   /* LCD Cursor X Position Register 1 */
-    {0x0074,0x00},   /* LCD Cursor Y Position Register 0 */
-    {0x0075,0x00},   /* LCD Cursor Y Position Register 1 */
-    {0x0076,0x00},   /* LCD Ink/Cursor Blue Color 0 Register */
-    {0x0077,0x00},   /* LCD Ink/Cursor Green Color 0 Register */
-    {0x0078,0x00},   /* LCD Ink/Cursor Red Color 0 Register */
-    {0x007A,0x1F},   /* LCD Ink/Cursor Blue Color 1 Register */
-    {0x007B,0x3F},   /* LCD Ink/Cursor Green Color 1 Register */
-    {0x007C,0x1F},   /* LCD Ink/Cursor Red Color 1 Register */
-    {0x007E,0x00},   /* LCD Ink/Cursor FIFO Threshold Register */
-    {0x0080,0x00},   /* CRT/TV Ink/Cursor Control Register */
-    {0x0081,0x00},   /* CRT/TV Ink/Cursor Start Address Register */
-    {0x0082,0x00},   /* CRT/TV Cursor X Position Register 0 */
-    {0x0083,0x00},   /* CRT/TV Cursor X Position Register 1 */
-    {0x0084,0x00},   /* CRT/TV Cursor Y Position Register 0 */
-    {0x0085,0x00},   /* CRT/TV Cursor Y Position Register 1 */
-    {0x0086,0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register */
-    {0x0087,0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register */
-    {0x0088,0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register */
-    {0x008A,0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register */
-    {0x008B,0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register */
-    {0x008C,0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register */
-    {0x008E,0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register */
-    {0x0100,0x00},   /* BitBlt Control Register 0 */
-    {0x0101,0x00},   /* BitBlt Control Register 1 */
-    {0x0102,0x00},   /* BitBlt ROP Code/Color Expansion Register */
-    {0x0103,0x00},   /* BitBlt Operation Register */
-    {0x0104,0x00},   /* BitBlt Source Start Address Register 0 */
-    {0x0105,0x00},   /* BitBlt Source Start Address Register 1 */
-    {0x0106,0x00},   /* BitBlt Source Start Address Register 2 */
-    {0x0108,0x00},   /* BitBlt Destination Start Address Register 0 */
-    {0x0109,0x00},   /* BitBlt Destination Start Address Register 1 */
-    {0x010A,0x00},   /* BitBlt Destination Start Address Register 2 */
-    {0x010C,0x00},   /* BitBlt Memory Address Offset Register 0 */
-    {0x010D,0x00},   /* BitBlt Memory Address Offset Register 1 */
-    {0x0110,0x00},   /* BitBlt Width Register 0 */
-    {0x0111,0x00},   /* BitBlt Width Register 1 */
-    {0x0112,0x00},   /* BitBlt Height Register 0 */
-    {0x0113,0x00},   /* BitBlt Height Register 1 */
-    {0x0114,0x00},   /* BitBlt Background Color Register 0 */
-    {0x0115,0x00},   /* BitBlt Background Color Register 1 */
-    {0x0118,0x00},   /* BitBlt Foreground Color Register 0 */
-    {0x0119,0x00},   /* BitBlt Foreground Color Register 1 */
-    {0x01E0,0x00},   /* Look-Up Table Mode Register */
-    {0x01E2,0x00},   /* Look-Up Table Address Register */
-    {0x01E4,0x00},   /* Look-Up Table Data Register */
-    {0x01F0,0x10},   /* Power Save Configuration Register */
-    {0x01F1,0x00},   /* Power Save Status Register */
-    {0x01F4,0x00},   /* CPU-to-Memory Access Watchdog Timer Register */
-    {0x01FC,0x01},   /* Display Mode Register */
-    {0, 0}
-};
-#endif /* CONFIG_VIDEO_SED13806_8BPP */
-
-#ifdef CONFIG_VIDEO_SED13806_16BPP
-
-static const S1D_REGS init_regs [] =
-{
-    {0x0001,0x00},   /* Miscellaneous Register */
-    {0x01FC,0x00},   /* Display Mode Register */
-    {0x0004,0x1b},   /* General IO Pins Configuration Register 0 */
-    {0x0005,0x00},   /* General IO Pins Configuration Register 1 */
-    {0x0008,0xe5},   /* General IO Pins Control Register 0 */
-    {0x0009,0x1f},   /* General IO Pins Control Register 1 */
-    {0x0010,0x02},   /* Memory Clock Configuration Register */
-    {0x0014,0x10},   /* LCD Pixel Clock Configuration Register */
-    {0x0018,0x02},   /* CRT/TV Pixel Clock Configuration Register */
-    {0x001C,0x02},   /* MediaPlug Clock Configuration Register */
-    {0x001E,0x01},   /* CPU To Memory Wait State Select Register */
-    {0x0021,0x04},   /* DRAM Refresh Rate Register */
-    {0x002A,0x00},   /* DRAM Timings Control Register 0 */
-    {0x002B,0x01},   /* DRAM Timings Control Register 1 */
-    {0x0020,0x80},   /* Memory Configuration Register */
-    {0x0030,0x25},   /* Panel Type Register */
-    {0x0031,0x00},   /* MOD Rate Register */
-    {0x0032,0x4F},   /* LCD Horizontal Display Width Register */
-    {0x0034,0x13},   /* LCD Horizontal Non-Display Period Register */
-    {0x0035,0x01},   /* TFT FPLINE Start Position Register */
-    {0x0036,0x0B},   /* TFT FPLINE Pulse Width Register */
-    {0x0038,0xDF},   /* LCD Vertical Display Height Register 0 */
-    {0x0039,0x01},   /* LCD Vertical Display Height Register 1 */
-    {0x003A,0x2C},   /* LCD Vertical Non-Display Period Register */
-    {0x003B,0x00},   /* TFT FPFRAME Start Position Register */
-    {0x003C,0x01},   /* TFT FPFRAME Pulse Width Register */
-    {0x0040,0x05},   /* LCD Display Mode Register */
-    {0x0041,0x02},   /* LCD Miscellaneous Register */
-    {0x0042,0x00},   /* LCD Display Start Address Register 0 */
-    {0x0043,0x00},   /* LCD Display Start Address Register 1 */
-    {0x0044,0x00},   /* LCD Display Start Address Register 2 */
-    {0x0046,0x80},   /* LCD Memory Address Offset Register 0 */
-    {0x0047,0x02},   /* LCD Memory Address Offset Register 1 */
-    {0x0048,0x00},   /* LCD Pixel Panning Register */
-    {0x004A,0x00},   /* LCD Display FIFO High Threshold Control Register */
-    {0x004B,0x00},   /* LCD Display FIFO Low Threshold Control Register */
-    {0x0050,0x4F},   /* CRT/TV Horizontal Display Width Register */
-    {0x0052,0x13},   /* CRT/TV Horizontal Non-Display Period Register */
-    {0x0053,0x01},   /* CRT/TV HRTC Start Position Register */
-    {0x0054,0x0B},   /* CRT/TV HRTC Pulse Width Register */
-    {0x0056,0xDF},   /* CRT/TV Vertical Display Height Register 0 */
-    {0x0057,0x01},   /* CRT/TV Vertical Display Height Register 1 */
-    {0x0058,0x2B},   /* CRT/TV Vertical Non-Display Period Register */
-    {0x0059,0x09},   /* CRT/TV VRTC Start Position Register */
-    {0x005A,0x01},   /* CRT/TV VRTC Pulse Width Register */
-    {0x005B,0x00},   /* TV Output Control Register */
-    {0x0060,0x05},   /* CRT/TV Display Mode Register */
-    {0x0062,0x00},   /* CRT/TV Display Start Address Register 0 */
-    {0x0063,0x00},   /* CRT/TV Display Start Address Register 1 */
-    {0x0064,0x00},   /* CRT/TV Display Start Address Register 2 */
-    {0x0066,0x80},   /* CRT/TV Memory Address Offset Register 0 */
-    {0x0067,0x02},   /* CRT/TV Memory Address Offset Register 1 */
-    {0x0068,0x00},   /* CRT/TV Pixel Panning Register */
-    {0x006A,0x00},   /* CRT/TV Display FIFO High Threshold Control Register */
-    {0x006B,0x00},   /* CRT/TV Display FIFO Low Threshold Control Register */
-    {0x0070,0x00},   /* LCD Ink/Cursor Control Register */
-    {0x0071,0x00},   /* LCD Ink/Cursor Start Address Register */
-    {0x0072,0x00},   /* LCD Cursor X Position Register 0 */
-    {0x0073,0x00},   /* LCD Cursor X Position Register 1 */
-    {0x0074,0x00},   /* LCD Cursor Y Position Register 0 */
-    {0x0075,0x00},   /* LCD Cursor Y Position Register 1 */
-    {0x0076,0x00},   /* LCD Ink/Cursor Blue Color 0 Register */
-    {0x0077,0x00},   /* LCD Ink/Cursor Green Color 0 Register */
-    {0x0078,0x00},   /* LCD Ink/Cursor Red Color 0 Register */
-    {0x007A,0x1F},   /* LCD Ink/Cursor Blue Color 1 Register */
-    {0x007B,0x3F},   /* LCD Ink/Cursor Green Color 1 Register */
-    {0x007C,0x1F},   /* LCD Ink/Cursor Red Color 1 Register */
-    {0x007E,0x00},   /* LCD Ink/Cursor FIFO Threshold Register */
-    {0x0080,0x00},   /* CRT/TV Ink/Cursor Control Register */
-    {0x0081,0x00},   /* CRT/TV Ink/Cursor Start Address Register */
-    {0x0082,0x00},   /* CRT/TV Cursor X Position Register 0 */
-    {0x0083,0x00},   /* CRT/TV Cursor X Position Register 1 */
-    {0x0084,0x00},   /* CRT/TV Cursor Y Position Register 0 */
-    {0x0085,0x00},   /* CRT/TV Cursor Y Position Register 1 */
-    {0x0086,0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register */
-    {0x0087,0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register */
-    {0x0088,0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register */
-    {0x008A,0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register */
-    {0x008B,0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register */
-    {0x008C,0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register */
-    {0x008E,0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register */
-    {0x0100,0x00},   /* BitBlt Control Register 0 */
-    {0x0101,0x00},   /* BitBlt Control Register 1 */
-    {0x0102,0x00},   /* BitBlt ROP Code/Color Expansion Register */
-    {0x0103,0x00},   /* BitBlt Operation Register */
-    {0x0104,0x00},   /* BitBlt Source Start Address Register 0 */
-    {0x0105,0x00},   /* BitBlt Source Start Address Register 1 */
-    {0x0106,0x00},   /* BitBlt Source Start Address Register 2 */
-    {0x0108,0x00},   /* BitBlt Destination Start Address Register 0 */
-    {0x0109,0x00},   /* BitBlt Destination Start Address Register 1 */
-    {0x010A,0x00},   /* BitBlt Destination Start Address Register 2 */
-    {0x010C,0x00},   /* BitBlt Memory Address Offset Register 0 */
-    {0x010D,0x00},   /* BitBlt Memory Address Offset Register 1 */
-    {0x0110,0x00},   /* BitBlt Width Register 0 */
-    {0x0111,0x00},   /* BitBlt Width Register 1 */
-    {0x0112,0x00},   /* BitBlt Height Register 0 */
-    {0x0113,0x00},   /* BitBlt Height Register 1 */
-    {0x0114,0x00},   /* BitBlt Background Color Register 0 */
-    {0x0115,0x00},   /* BitBlt Background Color Register 1 */
-    {0x0118,0x00},   /* BitBlt Foreground Color Register 0 */
-    {0x0119,0x00},   /* BitBlt Foreground Color Register 1 */
-    {0x01E0,0x01},   /* Look-Up Table Mode Register */
-    {0x01E2,0x00},   /* Look-Up Table Address Register */
-    {0x01E4,0x00},   /* Look-Up Table Data Register */
-    {0x01F0,0x10},   /* Power Save Configuration Register */
-    {0x01F1,0x00},   /* Power Save Status Register */
-    {0x01F4,0x00},   /* CPU-to-Memory Access Watchdog Timer Register */
-    {0x01FC,0x01},   /* Display Mode Register */
-    {0, 0}
-};
-
-#endif /* CONFIG_VIDEO_SED13806_16BPP */
-#endif /* CONFIG_NEC_NL6448BC20 */
-
-
-#ifdef CONFIG_CONSOLE_EXTRA_INFO
-
-/*-----------------------------------------------------------------------------
- * video_get_info_str -- setup a board string: type, speed, etc.
- * line_number= location to place info string beside logo
- * info= buffer for info string
- *-----------------------------------------------------------------------------
- */
-void video_get_info_str (int line_number, char *info)
-{
-    if (line_number == 1) {
-	strcpy (info, " RPXClassic board");
-    }
-    else {
-	info [0] = '\0';
-    }
-
-}
-#endif
-
-/*-----------------------------------------------------------------------------
- * board_video_init -- init de l'EPSON, config du CS
- *-----------------------------------------------------------------------------
- */
-unsigned int board_video_init (void)
-{
-    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-    volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-    /* Program ECCX registers                                                */
-    *(ECCX_CSR12) |= ECCX_860;
-    *(ECCX_CSR8) |= ECCX_BE | ECCX_CS2;
-    *(ECCX_CSR8) |= ECCX_ENEPSON;
-
-    memctl->memc_or2 = SED13806_OR;
-    memctl->memc_br2 = SED13806_REG_ADDR | SED13806_ACCES;
-
-    return (SED13806_REG_ADDR);
-}
-
-/*-----------------------------------------------------------------------------
- * board_validate_screen --
- *-----------------------------------------------------------------------------
- */
-void board_validate_screen (unsigned int base)
-{
-    /* Activate the panel bias power                                         */
-    *(volatile unsigned char *)(base + REG_GPIO_CTRL) = 0x80;
-}
-/*-----------------------------------------------------------------------------
- * board_get_regs --
- *-----------------------------------------------------------------------------
- */
-const S1D_REGS *board_get_regs (void)
-{
-    return (init_regs);
-}
-/*-----------------------------------------------------------------------------
- * board_get_width --
- *-----------------------------------------------------------------------------
- */
-int board_get_width (void)
-{
-    return (DISPLAY_WIDTH);
-}
-
-/*-----------------------------------------------------------------------------
- * board_get_height --
- *-----------------------------------------------------------------------------
- */
-int board_get_height (void)
-{
-    return (DISPLAY_HEIGHT);
-}
-
-#endif /* CONFIG_VIDEO_SED13806 */
diff --git a/board/RPXClassic/flash.c b/board/RPXClassic/flash.c
deleted file mode 100644
index 97ffa68..0000000
--- a/board/RPXClassic/flash.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * (C)  Copyright 2001
- * Stäubli Faverges - <www.staubli.com>
- * Pierre AUBERT  p.aubert@staubli.com
- * U-Boot port on RPXClassic LF (CLLF_BW31) board
- *
- * RPXClassic uses Am29DL323B flash memory with 2 banks
- *
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0 ;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-
-	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-	flash_info[0].size = size_b0;
-
-	return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x00010000;
-		info->start[3] = base + 0x00018000;
-		info->start[4] = base + 0x00020000;
-		info->start[5] = base + 0x00028000;
-		info->start[6] = base + 0x00030000;
-		info->start[7] = base + 0x00038000;
-		for (i = 8; i < info->sector_count; i++) {
-			info->start[i] = base + ((i-7) * 0x00040000) ;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMDL323B:
-	    printf ("AMDL323DB (16 Mbytes, bottom boot sect)\n");
-	    break;
-	default:
-	    printf ("Unknown Chip Type\n");
-	    break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-	/* Reset flash componeny                                             */
-	addr [0] = 0xf0f0f0f0;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0xAAA] = 0xAAAAAAAA ;
-	addr[0x555] = 0x55555555 ;
-	addr[0xAAA] = 0x90909090 ;
-
-	value = addr[0] ;
-
-	switch (value & 0x00FF00FF) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[2] ;		/* device ID		*/
-
-	switch (value & 0x00FF00FF) {
-	case (AMD_ID_DL323B & 0x00FF00FF):
-	    info->flash_id += FLASH_AMDL323B;
-	    info->sector_count = 71;
-	    info->size = 0x01000000;            /* 16 Mb                     */
-
-	    break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-	/* set up sector start address table */
-	/* set sector offsets for bottom boot block type	*/
-	info->start[0] = base + 0x00000000;
-	info->start[1] = base + 0x00008000;
-	info->start[2] = base + 0x00010000;
-	info->start[3] = base + 0x00018000;
-	info->start[4] = base + 0x00020000;
-	info->start[5] = base + 0x00028000;
-	info->start[6] = base + 0x00030000;
-	info->start[7] = base + 0x00038000;
-	for (i = 8; i < info->sector_count; i++) {
-	    info->start[i] = base + ((i-7) * 0x00040000) ;
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < 23; i++) {
-	    /* read sector protection at sector address, (A7 .. A0) = 0x02 */
-	    /* D0 = 1 if protected */
-	    addr = (volatile unsigned long *)(info->start[i]);
-	    info->protect[i] = addr[4] & 1 ;
-	}
-	/* Check for protected sectors in the 2nd bank                       */
-	addr[0x100AAA] = 0xAAAAAAAA ;
-	addr[0x100555] = 0x55555555 ;
-	addr[0x100AAA] = 0x90909090 ;
-
-	for (i = 23; i < info->sector_count; i++) {
-	    /* read sector protection at sector address, (A7 .. A0) = 0x02 */
-	    /* D0 = 1 if protected */
-	    addr = (volatile unsigned long *)(info->start[i]);
-	    info->protect[i] = addr[4] & 1 ;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (volatile unsigned long *)info->start[0];
-
-		*addr = 0xF0F0F0F0;	/* reset bank 1                      */
-		addr = (volatile unsigned long *)info->start[23];
-
-		*addr = 0xF0F0F0F0;	/* reset bank 2                      */
-
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-	addr[0xAAA] = 0x80808080;
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long *)(info->start[sect]) ;
-			addr[0] = 0x30303030 ;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (vu_long *)(info->start[l_sect]);
-	while ((addr[0] & 0x80808080) != 0x80808080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (vu_long *)info->start[0];
-	addr[0] = 0xF0F0F0F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long *)(info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-	addr[0xAAA] = 0xA0A0A0A0;
-
-	*((vu_long *)dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds
deleted file mode 100644
index 0eb2fba..0000000
--- a/board/RPXClassic/u-boot.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug
deleted file mode 100644
index b9c84c7..0000000
--- a/board/RPXClassic/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}