rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

16 files changed, 236 insertions, 236 deletions

diff --git a/board/Marvell/common/flash.c b/board/Marvell/common/flash.c
index 3603372..21eae0e 100644
--- a/board/Marvell/common/flash.c
+++ b/board/Marvell/common/flash.c
@@ -48,7 +48,7 @@
 int flash_erase_intel (flash_info_t * info, int s_first, int s_last);
 int write_word_intel (bank_addr_t addr, bank_word_t value);
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -68,14 +68,14 @@ unsigned long flash_init (void)
 	unsigned long base, flash_size;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* the boot flash */
-	base = CFG_FLASH_BASE;
+	base = CONFIG_SYS_FLASH_BASE;
 	size_b0 =
-		flash_get_size (CFG_BOOT_FLASH_WIDTH, (vu_long *) base,
+		flash_get_size (CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *) base,
 				&flash_info[0]);
 
 	printf ("[%ldkB@%lx] ", size_b0 / 1024, base);
@@ -84,11 +84,11 @@ unsigned long flash_init (void)
 		printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b0, size_b0 << 20);
 	}
 
-	base = memoryGetDeviceBaseAddress (CFG_EXTRA_FLASH_DEVICE);
+	base = memoryGetDeviceBaseAddress (CONFIG_SYS_EXTRA_FLASH_DEVICE);
 /*	base = memoryGetDeviceBaseAddress(DEV_CS3_BASE_ADDR);*/
-	for (i = 1; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 1; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		unsigned long size =
-			flash_get_size (CFG_EXTRA_FLASH_WIDTH,
+			flash_get_size (CONFIG_SYS_EXTRA_FLASH_WIDTH,
 					(vu_long *) base, &flash_info[i]);
 
 		printf ("[%ldMB@%lx] ", size >> 20, base);
@@ -617,7 +617,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 							/* has the timeout limit been reached? */
 							if (get_timer (start)
 							    >
-							    CFG_FLASH_ERASE_TOUT)
+							    CONFIG_SYS_FLASH_ERASE_TOUT)
 							{
 								/* timeout limit reached */
 								printf ("Time out limit reached erasing sector at address %08lx\n", info->start[sect]);
@@ -776,7 +776,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	addr = (volatile unsigned char *) (info->start[l_sect]);
 	/* broken for 2x16: TODO */
 	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -956,7 +956,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 				{
 					/* has the timeout limit been reached? */
 					if (get_timer (start) >
-					    CFG_FLASH_WRITE_TOUT) {
+					    CONFIG_SYS_FLASH_WRITE_TOUT) {
 						/* timeout limit reached */
 						printf ("Time out limit reached programming address %08lx with data %08lx\n", dest, data);
 						/* reset the flash */
@@ -1064,7 +1064,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *) dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/Marvell/common/i2c.c b/board/Marvell/common/i2c.c
index 32b2b30..d426044 100644
--- a/board/Marvell/common/i2c.c
+++ b/board/Marvell/common/i2c.c
@@ -48,7 +48,7 @@ static void i2c_init (int speed, int slaveaddr)
 	unsigned int actualN = 0, actualM = 0;
 	unsigned int control, status;
 	unsigned int minMargin = 0xffffffff;
-	unsigned int tclk = CFG_TCLK;
+	unsigned int tclk = CONFIG_SYS_TCLK;
 	unsigned int i2cFreq = speed;	/* 100000 max. Fast mode not supported */
 
 	DP (puts ("i2c_init\n"));
@@ -372,7 +372,7 @@ i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 	  int len)
 {
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_read\n"));
 
@@ -447,7 +447,7 @@ i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 	   int len)
 {
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_write\n"));
 
@@ -500,7 +500,7 @@ int i2c_probe (uchar chip)
 	unsigned int i2c_status;
 #endif
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_probe\n"));
 
diff --git a/board/Marvell/common/intel_flash.c b/board/Marvell/common/intel_flash.c
index d26f883..42b3ee1 100644
--- a/board/Marvell/common/intel_flash.c
+++ b/board/Marvell/common/intel_flash.c
@@ -152,7 +152,7 @@ int write_word_intel (bank_addr_t addr, bank_word_t value)
 	/* data polling for D7 */
 	start = get_timer (0);
 	do {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			retval = 1;
 			goto done;
 		}
@@ -227,7 +227,7 @@ int flash_erase_intel (flash_info_t * info, int s_first, int s_last)
 			do {
 				now = get_timer (start);
 
-				if (now - estart > CFG_FLASH_ERASE_TOUT) {
+				if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout (sect %d)\n", sect);
 					haderr = 1;
 					break;
diff --git a/board/Marvell/common/intel_flash.h b/board/Marvell/common/intel_flash.h
index 666a4cd..bd8941e 100644
--- a/board/Marvell/common/intel_flash.h
+++ b/board/Marvell/common/intel_flash.h
@@ -68,7 +68,7 @@
 /* ID and Lock Configuration */
 #define CHIP_RD_ID_LOCK		0x01		/* Bit 0 of each byte */
 #define CHIP_RD_ID_MAN		0x89		/* Manufacturer code = 0x89 */
-#define CHIP_RD_ID_DEV		CFG_FLASH_ID
+#define CHIP_RD_ID_DEV		CONFIG_SYS_FLASH_ID
 
 /* dimensions */
 #define CHIP_WIDTH		2		/* chips are in 16 bit mode */
diff --git a/board/Marvell/common/misc.S b/board/Marvell/common/misc.S
index 41c3a95..b3a0898 100644
--- a/board/Marvell/common/misc.S
+++ b/board/Marvell/common/misc.S
@@ -16,7 +16,7 @@
 board_relocate_rom:
 	mflr	r7
 	/* update the location of the GT registers */
-	lis	r11, CFG_GT_REGS@h
+	lis	r11, CONFIG_SYS_GT_REGS@h
 	/* if we're using ECC, we must use the DMA engine to copy ourselves */
 	bl	start_idma_transfer_0
 	bl	wait_for_idma_0
@@ -29,12 +29,12 @@ board_relocate_rom:
 board_init_ecc:
 	mflr	r7
 	/* NOTE: r10 still contains the location we've been relocated to
-	 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+	 * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */
 
 	/* now that we're running from ram, init the rest of main memory
 	 * for ECC use */
-	lis	r8, CFG_MONITOR_LEN@h
-	ori	r8, r8, CFG_MONITOR_LEN@l
+	lis	r8, CONFIG_SYS_MONITOR_LEN@h
+	ori	r8, r8, CONFIG_SYS_MONITOR_LEN@l
 
 	divw	r3, r10, r8
 
@@ -120,15 +120,15 @@ stop_idma_engine_0:
 	blr
 #endif
 
-#ifdef CFG_BOARD_ASM_INIT
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
 	/* NOTE: trashes r3-r7 */
 	.globl board_asm_init
 board_asm_init:
 	/* just move the GT registers to where they belong */
-	lis	r3, CFG_DFL_GT_REGS@h
-	ori	r3, r3, CFG_DFL_GT_REGS@l
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
+	lis	r3, CONFIG_SYS_DFL_GT_REGS@h
+	ori	r3, r3, CONFIG_SYS_DFL_GT_REGS@l
+	lis	r4, CONFIG_SYS_GT_REGS@h
+	ori	r4, r4, CONFIG_SYS_GT_REGS@l
 	li	r5, INTERNAL_SPACE_DECODE
 
 	/* test to see if we've already moved */
diff --git a/board/Marvell/common/ns16550.c b/board/Marvell/common/ns16550.c
index 475445b..7fbf28a 100644
--- a/board/Marvell/common/ns16550.c
+++ b/board/Marvell/common/ns16550.c
@@ -1,7 +1,7 @@
 /*
  * COM1 NS16550 support
  * originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
  *
  * further modified by Josh Huber <huber@mclx.com> to support
  * the DUART on the Galileo Eval board. (db64360)
@@ -13,8 +13,8 @@
 #ifdef ZUMA_NTL
 /* no 16550 device */
 #else
-const NS16550_t COM_PORTS[] = { (NS16550_t) (CFG_DUART_IO + 0),
-	(NS16550_t) (CFG_DUART_IO + 0x20)
+const NS16550_t COM_PORTS[] = { (NS16550_t) (CONFIG_SYS_DUART_IO + 0),
+	(NS16550_t) (CONFIG_SYS_DUART_IO + 0x20)
 };
 
 volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
diff --git a/board/Marvell/common/ns16550.h b/board/Marvell/common/ns16550.h
index f2ed2ab..b9691ab 100644
--- a/board/Marvell/common/ns16550.h
+++ b/board/Marvell/common/ns16550.h
@@ -2,7 +2,7 @@
  * NS16550 Serial Port
  * originally from linux source (arch/ppc/boot/ns16550.h)
  * modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
+ * have addresses as offsets from CONFIG_SYS_ISA_BASE
  * added a few more definitions
  * added prototypes for ns16550.c
  * reduced no of com ports to 2
diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c
index 01efbea..3e7f406 100644
--- a/board/Marvell/common/serial.c
+++ b/board/Marvell/common/serial.c
@@ -52,17 +52,17 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int serial_init (void)
 {
-#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
+#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
 	int clock_divisor = 230400 / gd->baudrate;
 #endif
 
 	mpsc_init (gd->baudrate);
 
 	/* init the DUART chans so that KGDB in the kernel can use them */
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	NS16550_reinit (COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	NS16550_reinit (COM_PORTS[1], clock_divisor);
 #endif
 	return (0);
@@ -97,10 +97,10 @@ int serial_init (void)
 {
 	int clock_divisor = 230400 / gd->baudrate;
 
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	(void) NS16550_init (0, clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	(void) NS16550_init (1, clock_divisor);
 #endif
 	return (0);
@@ -109,29 +109,29 @@ int serial_init (void)
 void serial_putc (const char c)
 {
 	if (c == '\n')
-		NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
+		NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
 
-	NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
+	NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
 }
 
 int serial_getc (void)
 {
-	return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_getc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 int serial_tstc (void)
 {
-	return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_tstc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 void serial_setbrg (void)
 {
 	int clock_divisor = 230400 / gd->baudrate;
 
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	NS16550_reinit (COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	NS16550_reinit (COM_PORTS[1], clock_divisor);
 #endif
 }
diff --git a/board/Marvell/db64360/db64360.c b/board/Marvell/db64360/db64360.c
index c03d03d..35b695e 100644
--- a/board/Marvell/db64360/db64360.c
+++ b/board/Marvell/db64360/db64360.c
@@ -55,7 +55,7 @@
 /* ------------------------------------------------------------------------- */
 
 /* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
 
 /* Unfortunately, we cant change it while we are in flash, so we initialize it
  * to the "final" value. This means that any debug_led calls before
@@ -64,7 +64,7 @@
  */
 
 void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
 int display_mem_map (void);
 
 /* ------------------------------------------------------------------------- */
@@ -127,7 +127,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 
 	}
 	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
@@ -136,7 +136,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 	}
 
 	/* Enable master */
@@ -154,21 +154,21 @@ static void gt_pci_config (void)
 	/* ronen- add write to pci remap registers for 64460.
 	   in 64360 when writing to pci base go and overide remap automaticaly,
 	   in 64460 it doesn't */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
 
 	/* PCI interface settings */
 	/* Timeout set to retry forever */
@@ -184,7 +184,7 @@ static void gt_pci_config (void)
 	for (stat = 0; stat <= PCI_HOST1; stat++)
 		pciWriteConfigReg (stat,
 				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
+				   SELF, CONFIG_SYS_GT_REGS);
 #endif
 
 }
@@ -200,7 +200,7 @@ static void gt_cpu_config (void)
 	tmp = GTREGREAD (CPU_CONFIGURATION);
 
 	/* set the SINGLE_CPU bit  see MV64360 P.399 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
 	tmp |= CPU_CONF_SINGLE_CPU;
 #endif
 
@@ -251,7 +251,7 @@ int board_early_init_f (void)
 	 * it last time. (huber)
 	 */
 
-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+	my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
 
 	/* No PCI in first release of Port To_do: enable it. */
 #ifdef CONFIG_PCI
@@ -297,56 +297,56 @@ int board_early_init_f (void)
 	 * on-board sram on the eval board, and updates the correct
 	 * registers to boot from the sram. (device0)
 	 */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE)
 		sram_boot = 1;
 	if (!sram_boot)
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
 
-	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+	memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+	memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+	memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
 
 
 	/* configure device timing */
-#ifdef CFG_DEV0_PAR		/* set port parameters for SRAM device module access */
+#ifdef CONFIG_SYS_DEV0_PAR		/* set port parameters for SRAM device module access */
 	if (!sram_boot)
-		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
 #endif
 
-#ifdef CFG_DEV1_PAR		/* set port parameters for RTC device module access */
-	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#ifdef CONFIG_SYS_DEV1_PAR		/* set port parameters for RTC device module access */
+	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
 #endif
-#ifdef CFG_DEV2_PAR		/* set port parameters for DUART device module access */
-	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#ifdef CONFIG_SYS_DEV2_PAR		/* set port parameters for DUART device module access */
+	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
 #endif
 
-#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
 	/* detect if we are booting from the 32 bit flash */
 	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
 		/* 32 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
-			      CFG_32BIT_BOOT_PAR);
+			      CONFIG_SYS_32BIT_BOOT_PAR);
 	} else {
 		/* 8 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 	}
 #else
 	/* 8 bit boot flash only */
-/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
 #endif
 
 
 	gt_cpu_config ();
 
 	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+	GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+	GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+	GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+	GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
 
-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+	GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
 	DEBUG_LED0_ON ();
 	DEBUG_LED1_ON ();
 	DEBUG_LED2_ON ();
@@ -359,7 +359,7 @@ int board_early_init_f (void)
 int misc_init_r ()
 {
 	icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable ();
 #endif
 #ifdef CONFIG_MPSC
@@ -380,9 +380,9 @@ void after_reloc (ulong dest_addr, gd_t * gd)
 	/* check to see if we booted from the sram.  If so, move things
 	 * back to the way they should be. (we're running from main
 	 * memory at this point now */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-		memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE) {
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+		memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_DFL_BOOTCS_BASE, _8M);
 	}
 	display_mem_map ();
 	/* now, jump to the main ppcboot board init code */
@@ -402,7 +402,7 @@ int checkboard (void)
 {
 	int l_type = 0;
 
-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
 	return (l_type);
 }
 
@@ -415,34 +415,34 @@ void debug_led (int led, int mode)
 	if (mode == 1) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x08000);
 			break;
 
 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x0c000);
 			break;
 
 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x10000);
 			break;
 		}
 	} else if (mode == 0) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x14000);
 			break;
 
 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x18000);
 			break;
 
 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x1c000);
 			break;
 		}
@@ -513,7 +513,7 @@ int display_mem_map (void)
 
 /* DRAM check routines copied from gw8260 */
 
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
 
 /*********************************************************************/
 /* NAME:  move64() -  moves a double word (64-bit)		     */
@@ -544,7 +544,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 }
 
 
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
 
 unsigned long long pattern[] = {
 	0xaaaaaaaaaaaaaaaaULL,
@@ -607,7 +607,7 @@ unsigned long long pattern[] = {
 /*********************************************************************/
 int mem_test_data (void)
 {
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+	unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
 	unsigned long long temp64 = 0;
 	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
 	int i;
@@ -634,9 +634,9 @@ int mem_test_data (void)
 
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
 
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
 /*********************************************************************/
 /* NAME:  mem_test_address() -	test address lines		     */
 /*								     */
@@ -661,8 +661,8 @@ int mem_test_data (void)
 int mem_test_address (void)
 {
 	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+		(volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+	const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
 	unsigned int i;
 
 	/* write address to each location */
@@ -679,9 +679,9 @@ int mem_test_address (void)
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
 
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
 /*********************************************************************/
 /* NAME:   mem_march() -  memory march				     */
 /*								     */
@@ -739,7 +739,7 @@ int mem_march (volatile unsigned long long *base,
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
 
 /*********************************************************************/
 /* NAME:   mem_test_walk() -  a simple walking ones test	     */
@@ -771,8 +771,8 @@ int mem_test_walk (void)
 {
 	unsigned long long mask;
 	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+		(volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+	const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
 
 	unsigned int i;
 
@@ -848,9 +848,9 @@ int testdram (void)
 /*    runwalk = 0; */
 
 	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
 	}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	if (rundata == 1) {
 		printf ("Test DATA ...  ");
 		if (mem_test_data () == 1) {
@@ -860,7 +860,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	if (runaddress == 1) {
 		printf ("Test ADDRESS ...  ");
 		if (mem_test_address () == 1) {
@@ -870,7 +870,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	if (runwalk == 1) {
 		printf ("Test WALKING ONEs ...  ");
 		if (mem_test_walk () == 1) {
@@ -886,7 +886,7 @@ int testdram (void)
 	return 0;
 
 }
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 /* ronen - the below functions are used by the bootm function           */
 /*  - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -925,7 +925,7 @@ void board_prebootm_init ()
 /* MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0x0000ff00); */
 
 /* Relocate MV64360 internal regs */
-	my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+	my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, BRIDGE_REG_BASE_BOOTM);
 
 	icache_disable ();
 	dcache_disable ();
diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c
index 923d955..7ad6ae8 100644
--- a/board/Marvell/db64360/mpsc.c
+++ b/board/Marvell/db64360/mpsc.c
@@ -426,7 +426,7 @@ void mpsc_sdma_init (void)
 			  (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
 
 /* Setup MPSC internal address space base address	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);
 
 /* no high address remap*/
 	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -516,9 +516,9 @@ int galbrg_set_baudrate (int channel, int rate)
 
 #ifdef ZUMA_NTL
 	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #endif
 
 	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
diff --git a/board/Marvell/db64360/pci.c b/board/Marvell/db64360/pci.c
index 5637284..a7e3c95 100644
--- a/board/Marvell/db64360/pci.c
+++ b/board/Marvell/db64360/pci.c
@@ -859,14 +859,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI0_IO_SPACE_PCI,
+			CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci0_hose,
 		     pci_hose_read_config_byte_via_dword,
@@ -901,14 +901,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI1_IO_SPACE_PCI,
+			CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci1_hose,
 		     pci_hose_read_config_byte_via_dword,
diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c
index ecadaf2..d0817d7 100644
--- a/board/Marvell/db64360/sdram_init.c
+++ b/board/Marvell/db64360/sdram_init.c
@@ -312,7 +312,7 @@ return 0;
 	} else
 		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
 
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
 
 	for (i = 0; i <= 127; i++) {
 		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -690,16 +690,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     <
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 <
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							dimmInfo->
 								maxClSupported_DDR
@@ -714,16 +714,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     >
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 >
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							printf ("*********************************************************\n");
 							printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
@@ -1290,37 +1290,37 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
 	case 0x0:
 	case 0x80:		/* refresh period is 15.625 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+			(unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
 					/ (float) 1000000.0);
 		break;
 	case 0x1:
 	case 0x81:		/* refresh period is 3.9 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x2:
 	case 0x82:		/* refresh period is 7.8 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x3:
 	case 0x83:		/* refresh period is 31.3 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x4:
 	case 0x84:		/* refresh period is 62.5 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x5:
 	case 0x85:		/* refresh period is 125 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	default:		/* refresh period undefined */
@@ -1807,7 +1807,7 @@ phys_size_t initdram (int board_type)
 
 	printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
 
-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+	for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
 		/* skip over banks that are not populated */
 		if (!checkbank[bank_no])
 			continue;
diff --git a/board/Marvell/db64460/db64460.c b/board/Marvell/db64460/db64460.c
index 8a05cd2..14e6355 100644
--- a/board/Marvell/db64460/db64460.c
+++ b/board/Marvell/db64460/db64460.c
@@ -55,7 +55,7 @@
 /* ------------------------------------------------------------------------- */
 
 /* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
 
 /* Unfortunately, we cant change it while we are in flash, so we initialize it
  * to the "final" value. This means that any debug_led calls before
@@ -64,7 +64,7 @@
  */
 
 void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
 int display_mem_map (void);
 
 /* ------------------------------------------------------------------------- */
@@ -127,7 +127,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 
 	}
 	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
@@ -136,7 +136,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 	}
 
 	/* Enable master */
@@ -154,21 +154,21 @@ static void gt_pci_config (void)
 	/* ronen- add write to pci remap registers for 64460.
 	   in 64360 when writing to pci base go and overide remap automaticaly,
 	   in 64460 it doesn't */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
 
 	/* PCI interface settings */
 	/* Timeout set to retry forever */
@@ -184,7 +184,7 @@ static void gt_pci_config (void)
 	for (stat = 0; stat <= PCI_HOST1; stat++)
 		pciWriteConfigReg (stat,
 				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
+				   SELF, CONFIG_SYS_GT_REGS);
 #endif
 
 }
@@ -200,7 +200,7 @@ static void gt_cpu_config (void)
 	tmp = GTREGREAD (CPU_CONFIGURATION);
 
 	/* set the SINGLE_CPU bit  see MV64460 P.399 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
 	tmp |= CPU_CONF_SINGLE_CPU;
 #endif
 
@@ -251,7 +251,7 @@ int board_early_init_f (void)
 	 * it last time. (huber)
 	 */
 
-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+	my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
 
 	/* No PCI in first release of Port To_do: enable it. */
 #ifdef CONFIG_PCI
@@ -297,56 +297,56 @@ int board_early_init_f (void)
 	 * on-board sram on the eval board, and updates the correct
 	 * registers to boot from the sram. (device0)
 	 */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE)
 		sram_boot = 1;
 	if (!sram_boot)
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
 
-	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+	memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+	memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+	memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
 
 
 	/* configure device timing */
-#ifdef CFG_DEV0_PAR		/* set port parameters for SRAM device module access */
+#ifdef CONFIG_SYS_DEV0_PAR		/* set port parameters for SRAM device module access */
 	if (!sram_boot)
-		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
 #endif
 
-#ifdef CFG_DEV1_PAR		/* set port parameters for RTC device module access */
-	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#ifdef CONFIG_SYS_DEV1_PAR		/* set port parameters for RTC device module access */
+	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
 #endif
-#ifdef CFG_DEV2_PAR		/* set port parameters for DUART device module access */
-	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#ifdef CONFIG_SYS_DEV2_PAR		/* set port parameters for DUART device module access */
+	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
 #endif
 
-#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
 	/* detect if we are booting from the 32 bit flash */
 	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
 		/* 32 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
-			      CFG_32BIT_BOOT_PAR);
+			      CONFIG_SYS_32BIT_BOOT_PAR);
 	} else {
 		/* 8 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 	}
 #else
 	/* 8 bit boot flash only */
-/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
 #endif
 
 
 	gt_cpu_config ();
 
 	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+	GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+	GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+	GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+	GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
 
-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+	GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
 	DEBUG_LED0_ON ();
 	DEBUG_LED1_ON ();
 	DEBUG_LED2_ON ();
@@ -359,7 +359,7 @@ int board_early_init_f (void)
 int misc_init_r ()
 {
 	icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable ();
 #endif
 #ifdef CONFIG_MPSC
@@ -380,9 +380,9 @@ void after_reloc (ulong dest_addr, gd_t * gd)
 	/* check to see if we booted from the sram.  If so, move things
 	 * back to the way they should be. (we're running from main
 	 * memory at this point now */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-		memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE) {
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+		memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_DFL_BOOTCS_BASE, _8M);
 	}
 	display_mem_map ();
 	/* now, jump to the main ppcboot board init code */
@@ -402,7 +402,7 @@ int checkboard (void)
 {
 	int l_type = 0;
 
-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
 	return (l_type);
 }
 
@@ -415,34 +415,34 @@ void debug_led (int led, int mode)
 	if (mode == 1) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x08000);
 			break;
 
 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x0c000);
 			break;
 
 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x10000);
 			break;
 		}
 	} else if (mode == 0) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x14000);
 			break;
 
 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x18000);
 			break;
 
 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x1c000);
 			break;
 		}
@@ -513,7 +513,7 @@ int display_mem_map (void)
 
 /* DRAM check routines copied from gw8260 */
 
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
 
 /*********************************************************************/
 /* NAME:  move64() -  moves a double word (64-bit)		     */
@@ -544,7 +544,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 }
 
 
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
 
 unsigned long long pattern[] = {
 	0xaaaaaaaaaaaaaaaaULL,
@@ -607,7 +607,7 @@ unsigned long long pattern[] = {
 /*********************************************************************/
 int mem_test_data (void)
 {
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+	unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
 	unsigned long long temp64 = 0;
 	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
 	int i;
@@ -634,9 +634,9 @@ int mem_test_data (void)
 
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
 
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
 /*********************************************************************/
 /* NAME:  mem_test_address() -	test address lines		     */
 /*								     */
@@ -661,8 +661,8 @@ int mem_test_data (void)
 int mem_test_address (void)
 {
 	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+		(volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+	const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
 	unsigned int i;
 
 	/* write address to each location */
@@ -679,9 +679,9 @@ int mem_test_address (void)
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
 
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
 /*********************************************************************/
 /* NAME:   mem_march() -  memory march				     */
 /*								     */
@@ -739,7 +739,7 @@ int mem_march (volatile unsigned long long *base,
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
 
 /*********************************************************************/
 /* NAME:   mem_test_walk() -  a simple walking ones test	     */
@@ -771,8 +771,8 @@ int mem_test_walk (void)
 {
 	unsigned long long mask;
 	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+		(volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+	const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
 
 	unsigned int i;
 
@@ -848,9 +848,9 @@ int testdram (void)
 /*    runwalk = 0; */
 
 	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
 	}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	if (rundata == 1) {
 		printf ("Test DATA ...  ");
 		if (mem_test_data () == 1) {
@@ -860,7 +860,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	if (runaddress == 1) {
 		printf ("Test ADDRESS ...  ");
 		if (mem_test_address () == 1) {
@@ -870,7 +870,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	if (runwalk == 1) {
 		printf ("Test WALKING ONEs ...  ");
 		if (mem_test_walk () == 1) {
@@ -886,7 +886,7 @@ int testdram (void)
 	return 0;
 
 }
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 /* ronen - the below functions are used by the bootm function           */
 /*  - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -925,7 +925,7 @@ void board_prebootm_init ()
 	GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00);
 
 /* Relocate MV64460 internal regs */
-	my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+	my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, BRIDGE_REG_BASE_BOOTM);
 
 	icache_disable ();
 	dcache_disable ();
diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c
index 359b831..303a636 100644
--- a/board/Marvell/db64460/mpsc.c
+++ b/board/Marvell/db64460/mpsc.c
@@ -426,7 +426,7 @@ void mpsc_sdma_init (void)
 			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
 
 /* Setup MPSC internal address space base address	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);
 
 /* no high address remap*/
 	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -516,9 +516,9 @@ int galbrg_set_baudrate (int channel, int rate)
 
 #ifdef ZUMA_NTL
 	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #endif
 
 	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
diff --git a/board/Marvell/db64460/pci.c b/board/Marvell/db64460/pci.c
index 5637284..a7e3c95 100644
--- a/board/Marvell/db64460/pci.c
+++ b/board/Marvell/db64460/pci.c
@@ -859,14 +859,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI0_IO_SPACE_PCI,
+			CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci0_hose,
 		     pci_hose_read_config_byte_via_dword,
@@ -901,14 +901,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI1_IO_SPACE_PCI,
+			CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci1_hose,
 		     pci_hose_read_config_byte_via_dword,
diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c
index f36f348..6d6b126 100644
--- a/board/Marvell/db64460/sdram_init.c
+++ b/board/Marvell/db64460/sdram_init.c
@@ -312,7 +312,7 @@ return 0;
 	} else
 		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
 
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
 
 	for (i = 0; i <= 127; i++) {
 		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -690,16 +690,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     <
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 <
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							dimmInfo->
 								maxClSupported_DDR
@@ -714,16 +714,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     >
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 >
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							printf ("*********************************************************\n");
 							printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
@@ -1289,37 +1289,37 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
 	case 0x0:
 	case 0x80:		/* refresh period is 15.625 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+			(unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
 					/ (float) 1000000.0);
 		break;
 	case 0x1:
 	case 0x81:		/* refresh period is 3.9 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x2:
 	case 0x82:		/* refresh period is 7.8 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x3:
 	case 0x83:		/* refresh period is 31.3 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x4:
 	case 0x84:		/* refresh period is 62.5 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x5:
 	case 0x85:		/* refresh period is 125 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	default:		/* refresh period undefined */
@@ -1816,7 +1816,7 @@ phys_size_t initdram (int board_type)
 
 	printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
 
-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+	for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
 		/* skip over banks that are not populated */
 		if (!checkbank[bank_no])
 			continue;