Big white-space cleanup.

This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 31 insertions, 31 deletions

diff --git a/board/Marvell/db64460/mv_eth.c b/board/Marvell/db64460/mv_eth.c
index b2c7835..0458164 100644
--- a/board/Marvell/db64460/mv_eth.c
+++ b/board/Marvell/db64460/mv_eth.c
@@ -1390,7 +1390,7 @@ u32 mv_get_internal_sram_base (void)
 *       port_phy_addr).
 *
 * INPUT:
-*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
+*       ETH_PORT_INFO	*p_eth_port_ctrl       Ethernet port control struct
 *
 * OUTPUT:
 *       See description.
@@ -1550,7 +1550,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
 *       ether_init_rx_desc_ring for Rx queues).
 *
 * INPUT:
-*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
+*       ETH_PORT_INFO	*p_eth_port_ctrl       Ethernet port control struct
 *
 * OUTPUT:
 *       Ethernet port is ready to receive and transmit.
@@ -1640,7 +1640,7 @@ static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
 * INPUT:
 *	ETH_PORT eth_port_num     Port number.
 *	char *        p_addr		Address to be set
-*	ETH_QUEUE 	  queue		Rx queue number for this MAC address.
+*	ETH_QUEUE	  queue		Rx queue number for this MAC address.
 *
 * OUTPUT:
 *	Set MAC address low and high registers. also calls eth_port_uc_addr()
@@ -1678,10 +1678,10 @@ static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
 *	parameters.
 *
 * INPUT:
-*	ETH_PORT 	eth_port_num      Port number.
+*	ETH_PORT	eth_port_num      Port number.
 *	unsigned char uc_nibble		Unicast MAC Address last nibble.
-*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
-*	int 			option      0 = Add, 1 = remove address.
+*	ETH_QUEUE		 queue		Rx queue number for this MAC address.
+*	int			option      0 = Add, 1 = remove address.
 *
 * OUTPUT:
 *	This function add/removes MAC addresses from the port unicast address
@@ -1760,10 +1760,10 @@ static bool eth_port_uc_addr (ETH_PORT eth_port_num,
 *	   In this case, the function calculates the CRC-8bit value and calls
 *	   eth_port_omc_addr() routine to set the Other Multicast Table.
 * INPUT:
-*	ETH_PORT 	eth_port_num      Port number.
-*	unsigned char 	*p_addr		Unicast MAC Address.
-*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
-*	int 			option      0 = Add, 1 = remove address.
+*	ETH_PORT	eth_port_num      Port number.
+*	unsigned char	*p_addr		Unicast MAC Address.
+*	ETH_QUEUE		 queue		Rx queue number for this MAC address.
+*	int			option      0 = Add, 1 = remove address.
 *
 * OUTPUT:
 *	See description.
@@ -1894,10 +1894,10 @@ static void eth_port_mc_addr (ETH_PORT eth_port_num,
 *	according to the argument given.
 *
 * INPUT:
-*	ETH_PORT 	eth_port_num      Port number.
-*	unsigned char 	mc_byte		Multicast addr last byte (MAC DA[7:0] bits).
-*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
-*	int 			option      0 = Add, 1 = remove address.
+*	ETH_PORT	eth_port_num      Port number.
+*	unsigned char	mc_byte		Multicast addr last byte (MAC DA[7:0] bits).
+*	ETH_QUEUE		 queue		Rx queue number for this MAC address.
+*	int			option      0 = Add, 1 = remove address.
 *
 * OUTPUT:
 *	See description.
@@ -1958,10 +1958,10 @@ static bool eth_port_smc_addr (ETH_PORT eth_port_num,
 *	CRC-8 argument given.
 *
 * INPUT:
-*	ETH_PORT 	eth_port_num      Port number.
-*	unsigned char 	  crc8		A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
-*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
-*	int 			option      0 = Add, 1 = remove address.
+*	ETH_PORT	eth_port_num      Port number.
+*	unsigned char	  crc8		A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
+*	ETH_QUEUE		 queue		Rx queue number for this MAC address.
+*	int			option      0 = Add, 1 = remove address.
 *
 * OUTPUT:
 *	See description.
@@ -2202,7 +2202,7 @@ static bool ethernet_phy_reset (ETH_PORT eth_port_num)
  * eth_port_reset - Reset Ethernet port
  *
  * DESCRIPTION:
- * 	This routine resets the chip by aborting any SDMA engine activity and
+ *	This routine resets the chip by aborting any SDMA engine activity and
  *      clearing the MIB counters. The Receiver and the Transmit unit are in
  *      idle state after this command is performed and the port is disabled.
  *
@@ -2555,9 +2555,9 @@ static void eth_set_access_control (ETH_PORT eth_port_num,
  *
  * INPUT:
  *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
- *      int 			rx_desc_num       Number of Rx descriptors
- *      int 			rx_buff_size      Size of Rx buffer
+ *	ETH_QUEUE	rx_queue         Number of Rx queue.
+ *      int			rx_desc_num       Number of Rx descriptors
+ *      int			rx_buff_size      Size of Rx buffer
  *      unsigned int    rx_desc_base_addr  Rx descriptors memory area base addr.
  *      unsigned int    rx_buff_base_addr  Rx buffer memory area base addr.
  *
@@ -2649,9 +2649,9 @@ static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
  *
  * INPUT:
  *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
- *      int 			tx_desc_num       Number of Tx descriptors
- *      int 			tx_buff_size      Size of Tx buffer
+ *	ETH_QUEUE	tx_queue         Number of Tx queue.
+ *      int			tx_desc_num       Number of Tx descriptors
+ *      int			tx_buff_size      Size of Tx buffer
  *      unsigned int    tx_desc_base_addr  Tx descriptors memory area base addr.
  *      unsigned int    tx_buff_base_addr  Tx buffer memory area base addr.
  *
@@ -2744,7 +2744,7 @@ static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
  *
  * INPUT:
  *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
+ *	ETH_QUEUE	tx_queue         Number of Tx queue.
  *	PKT_INFO        *p_pkt_info       User packet buffer.
  *
  * OUTPUT:
@@ -2860,7 +2860,7 @@ static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
  *
  * INPUT:
  *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	tx_queue         Number of Tx queue.
+ *	ETH_QUEUE	tx_queue         Number of Tx queue.
  *	PKT_INFO        *p_pkt_info       User packet buffer.
  *
  * OUTPUT:
@@ -2929,7 +2929,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
  * eth_port_receive - Get received information from Rx ring.
  *
  * DESCRIPTION:
- * 	This routine returns the received data to the caller. There is no
+ *	This routine returns the received data to the caller. There is no
  *	data copying during routine operation. All information is returned
  *	using pointer to packet information struct passed from the caller.
  *      If the routine exhausts	Rx ring resources then the resource error flag
@@ -2937,7 +2937,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
  *
  * INPUT:
  *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
+ *	ETH_QUEUE	rx_queue         Number of Rx queue.
  *	PKT_INFO        *p_pkt_info       User packet buffer.
  *
  * OUTPUT:
@@ -2979,7 +2979,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
 
 	/* Nothing to receive... */
 	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-/* 	DP(printf("Rx: command_status: %08x\n", command_status)); */
+/*	DP(printf("Rx: command_status: %08x\n", command_status)); */
 		D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
 /*	DP(printf("\nETH_END_OF_JOB ...\n"));*/
 		return ETH_END_OF_JOB;
@@ -3018,7 +3018,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
  *
  * INPUT:
  *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
- *	ETH_QUEUE   	rx_queue         Number of Rx queue.
+ *	ETH_QUEUE	rx_queue         Number of Rx queue.
  *      PKT_INFO        *p_pkt_info       Information on the returned buffer.
  *
  * OUTPUT: