* Patch by Ronen Shitrit, 10 Dec 2003:

  Add support for the Marvell DB64360 / DB64460 development boards

* Patch by Detlev Zundel, 10 Dec 2003:
  fix dependency problem in examples/Makefile

1 files changed, 1072 insertions, 0 deletions

diff --git a/board/Marvell/common/flash.c b/board/Marvell/common/flash.c
new file mode 100644
index 0000000..c2c5b76
--- /dev/null
+++ b/board/Marvell/common/flash.c
@@ -0,0 +1,1072 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * flash.c - flash support for the 512k, 8bit boot flash
+ 	and the 8MB 32bit extra flash on the DB64360
+ *           most of this file was based on the existing U-Boot
+ *           flash drivers.
+ *
+ * written or collected and sometimes rewritten by
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "../include/mv_gen_reg.h"
+#include "../include/memory.h"
+#include "intel_flash.h"
+
+#define FLASH_ROM       0xFFFD	/* unknown flash type                   */
+#define FLASH_RAM       0xFFFE	/* unknown flash type                   */
+#define FLASH_MAN_UNKNOWN 0xFFFF0000
+
+/* #define DEBUG */
+
+/* Intel flash commands */
+int flash_erase_intel (flash_info_t * info, int s_first, int s_last);
+int write_word_intel (bank_addr_t addr, bank_word_t value);
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (int portwidth, vu_long * addr,
+			     flash_info_t * info);
+static int write_word (flash_info_t * info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned int i;
+	unsigned long size_b0 = 0, size_b1 = 0;
+	unsigned long base, flash_size;
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* the boot flash */
+	base = CFG_FLASH_BASE;
+	size_b0 =
+		flash_get_size (CFG_BOOT_FLASH_WIDTH, (vu_long *) base,
+				&flash_info[0]);
+
+	printf ("[%ldkB@%lx] ", size_b0 / 1024, base);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b0, size_b0 << 20);
+	}
+
+	base = memoryGetDeviceBaseAddress (CFG_EXTRA_FLASH_DEVICE);
+/*	base = memoryGetDeviceBaseAddress(DEV_CS3_BASE_ADDR);*/
+	for (i = 1; i < CFG_MAX_FLASH_BANKS; i++) {
+		unsigned long size =
+			flash_get_size (CFG_EXTRA_FLASH_WIDTH,
+					(vu_long *) base, &flash_info[i]);
+
+		printf ("[%ldMB@%lx] ", size >> 20, base);
+
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			if (i == 1) {
+				printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b1, size_b1 << 20);
+			}
+			break;
+		}
+		size_b1 += size;
+		base += size;
+	}
+
+	flash_size = size_b0 + size_b1;
+	return flash_size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+	int i;
+	int sector_size;
+
+	if (!info->sector_count)
+		return;
+
+	/* set up sector start address table */
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM040:
+	case FLASH_28F128J3A:
+	case FLASH_28F640J3A:
+	case FLASH_RAM:
+		/* this chip has uniformly spaced sectors */
+		sector_size = info->size / info->sector_count;
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * sector_size);
+		break;
+	default:
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type    */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00008000;
+			info->start[2] = base + 0x0000C000;
+			info->start[3] = base + 0x00010000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+					base + (i * 0x00020000) - 0x00060000;
+			}
+		} else {
+			/* set sector offsets for top boot block type               */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00008000;
+			info->start[i--] = base + info->size - 0x0000C000;
+			info->start[i--] = base + info->size - 0x00010000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00020000;
+			}
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_STM:
+		printf ("STM ");
+		break;
+	case FLASH_MAN_AMD:
+		printf ("AMD ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf ("FUJITSU ");
+		break;
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM040:
+		printf ("AM29LV040B (4 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM400B:
+		printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM400T:
+		printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM800B:
+		printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM800T:
+		printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM160B:
+		printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM160T:
+		printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM320B:
+		printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM320T:
+		printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+		break;
+	case FLASH_28F640J3A:
+		printf ("28F640J3A (64 Mbit)\n");
+		break;
+	case FLASH_28F128J3A:
+		printf ("28F128J3A (128 Mbit)\n");
+		break;
+	case FLASH_ROM:
+		printf ("ROM\n");
+		break;
+	case FLASH_RAM:
+		printf ("RAM\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	if ((info->size >> 20) > 0) {
+		printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+	} else {
+		printf ("  Size: %ld kB in %d Sectors\n",
+			info->size >> 10, info->sector_count);
+	}
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i], info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static inline void flash_cmd (int width, volatile unsigned char *addr,
+			      int offset, unsigned char cmd)
+{
+	/* supports 1x8, 1x16, and 2x16 */
+	/* 2x8 and 4x8 are not supported */
+	if (width == 4) {
+		/* assuming chips are in 16 bit mode */
+		/* 2x16 */
+		unsigned long cmd32 = (cmd << 16) | cmd;
+
+		*(volatile unsigned long *) (addr + offset * 2) = cmd32;
+	} else {
+		/* 1x16 or 1x8 */
+		*(volatile unsigned char *) (addr + offset) = cmd;
+	}
+}
+
+static ulong
+flash_get_size (int portwidth, vu_long * addr, flash_info_t * info)
+{
+	short i;
+	volatile unsigned char *caddr = (unsigned char *) addr;
+	volatile unsigned short *saddr = (unsigned short *) addr;
+	volatile unsigned long *laddr = (unsigned long *) addr;
+	char old[2], save;
+	ulong id = 0, manu = 0, base = (ulong) addr;
+
+#ifdef DEBUG
+	printf ("%s: enter\n", __FUNCTION__);
+#endif
+	info->portwidth = portwidth;
+
+	save = *caddr;
+
+	flash_cmd (portwidth, caddr, 0, 0xf0);
+	flash_cmd (portwidth, caddr, 0, 0xf0);
+
+	udelay (10);
+
+	old[0] = caddr[0];
+	old[1] = caddr[1];
+
+
+	if (old[0] != 0xf0) {
+		flash_cmd (portwidth, caddr, 0, 0xf0);
+		flash_cmd (portwidth, caddr, 0, 0xf0);
+
+		udelay (10);
+
+		if (*caddr == 0xf0) {
+			/* this area is ROM */
+			*caddr = save;
+			info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN;
+			info->sector_count = 8;
+			info->size = 0x80000;
+			flash_get_offsets (base, info);
+			return info->size;
+		}
+	} else {
+		*caddr = 0;
+
+		udelay (10);
+
+		if (*caddr == 0) {
+			/* this area is RAM */
+			*caddr = save;
+			info->flash_id = FLASH_RAM + FLASH_MAN_UNKNOWN;
+			info->sector_count = 8;
+			info->size = 0x80000;
+			flash_get_offsets (base, info);
+			return info->size;
+		}
+		flash_cmd (portwidth, caddr, 0, 0xf0);
+
+		udelay (10);
+	}
+
+	/* Write auto select command: read Manufacturer ID */
+	flash_cmd (portwidth, caddr, 0x555, 0xAA);
+	flash_cmd (portwidth, caddr, 0x2AA, 0x55);
+	flash_cmd (portwidth, caddr, 0x555, 0x90);
+
+	udelay (10);
+
+	if ((caddr[0] == old[0]) && (caddr[1] == old[1])) {
+
+		/* this area is ROM */
+		info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN;
+		info->sector_count = 8;
+		info->size = 0x80000;
+		flash_get_offsets (base, info);
+		return info->size;
+#ifdef DEBUG
+	} else {
+		printf ("%px%d: %02x:%02x -> %02x:%02x\n",
+			caddr, portwidth, old[0], old[1], caddr[0], caddr[1]);
+#endif
+	}
+
+	switch (portwidth) {
+	case 1:
+		manu = caddr[0];
+		manu |= manu << 16;
+		id = caddr[1];
+		break;
+	case 2:
+		manu = saddr[0];
+		manu |= manu << 16;
+		id = saddr[1];
+		id |= id << 16;
+		break;
+	case 4:
+		manu = laddr[0];
+		id = laddr[1];
+		break;
+	}
+
+#ifdef DEBUG
+	flash_cmd (portwidth, caddr, 0, 0xf0);
+
+	printf ("\n%08lx:%08lx:%08lx\n", base, manu, id);
+	printf ("%08lx %08lx %08lx %08lx\n",
+		laddr[0], laddr[1], laddr[2], laddr[3]);
+#endif
+
+	switch (manu) {
+	case STM_MANUFACT:
+		info->flash_id = FLASH_MAN_STM;
+		break;
+	case AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+	default:
+		flash_cmd (portwidth, caddr, 0, 0xf0);
+
+		printf ("Unknown Mfr [%08lx]:%08lx\n", manu, id);
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);	/* no or unknown flash  */
+	}
+
+	switch (id) {
+	case AMD_ID_LV400T:
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		info->chipwidth = 1;
+		break;		/* => 1 MB      */
+
+	case AMD_ID_LV400B:
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		info->chipwidth = 1;
+		break;		/* => 1 MB      */
+
+	case AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		info->chipwidth = 1;
+		break;		/* => 2 MB      */
+
+	case AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		info->chipwidth = 1;
+		break;		/* => 2 MB      */
+
+	case AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		info->chipwidth = 1;
+		break;		/* => 4 MB      */
+
+	case AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		info->chipwidth = 1;
+		break;		/* => 4 MB      */
+#if 0				/* enable when device IDs are available */
+	case AMD_ID_LV320T:
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 67;
+		info->size = 0x00800000;
+		break;		/* => 8 MB      */
+
+	case AMD_ID_LV320B:
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 67;
+		info->size = 0x00800000;
+		break;		/* => 8 MB      */
+#endif
+	case AMD_ID_LV040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x80000;
+		info->chipwidth = 1;
+		break;		/* => 512 kB    */
+
+	case INTEL_ID_28F640J3A:
+		info->flash_id += FLASH_28F640J3A;
+		info->sector_count = 64;
+		info->size = 128 * 1024 * 64;	/* 128kbytes x 64 blocks */
+		info->chipwidth = 2;
+		if (portwidth == 4)
+			info->size *= 2;	/* 2x16 */
+		break;
+
+	case INTEL_ID_28F128J3A:
+		info->flash_id += FLASH_28F128J3A;
+		info->sector_count = 128;
+		info->size = 128 * 1024 * 128;	/* 128kbytes x 128 blocks */
+		info->chipwidth = 2;
+		if (portwidth == 4)
+			info->size *= 2;	/* 2x16 */
+		break;
+
+	default:
+		flash_cmd (portwidth, caddr, 0, 0xf0);
+
+		printf ("Unknown id %lx:[%lx]\n", manu, id);
+		info->flash_id = FLASH_UNKNOWN;
+		info->chipwidth = 1;
+		return (0);	/* => no or unknown flash */
+
+	}
+
+	flash_get_offsets (base, info);
+
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0)=0x02 */
+		/* D0 = 1 if protected */
+		caddr = (volatile unsigned char *) (info->start[i]);
+		saddr = (volatile unsigned short *) (info->start[i]);
+		laddr = (volatile unsigned long *) (info->start[i]);
+		if (portwidth == 1)
+			info->protect[i] = caddr[2] & 1;
+		else if (portwidth == 2)
+			info->protect[i] = saddr[2] & 1;
+		else
+			info->protect[i] = laddr[2] & 1;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		caddr = (volatile unsigned char *) info->start[0];
+
+		flash_cmd (portwidth, caddr, 0, 0xF0);	/* reset bank */
+	}
+
+	return (info->size);
+}
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	volatile unsigned char *addr = (char *) (info->start[0]);
+	int flag, prot, sect, l_sect;
+	ulong start, now, last;
+
+/* modified to support 2x16 Intel flash */
+/* Note that the code will not exit on a flash erasure error or timeout */
+/* but will print and error message and continue processing sectors */
+/* until they are all erased. */
+/* 10-16-2002 P. Marchese */
+	ulong mask;
+	int timeout;
+
+	if (info->portwidth == 4)
+/*		{
+		printf ("- Warning: erasing of 32Bit (2*16Bit i.e. 2*28F640J3A) not supported yet !!!! \n");
+		return 1;
+		}*/
+	{
+		/* make sure it's Intel flash */
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+			/* yup! it's an Intel flash */
+			/* is it 16-bits wide? */
+			if (info->chipwidth == 2) {
+				/* yup! it's 16-bits wide */
+				/* are there any sectors to process? */
+				if ((s_first < 0) || (s_first > s_last)) {
+					printf ("Error:  There are no sectors to erase\n");
+					printf ("Either sector %d is less than zero\n", s_first);
+					printf ("or sector %d is greater than sector %d\n", s_first, s_last);
+					return 1;
+				}
+				/* check for protected sectors */
+				prot = 0;
+				for (sect = s_first; sect <= s_last; ++sect)
+					if (info->protect[sect])
+						prot++;
+				/* if variable "prot" is nonzero, there are protected sectors */
+				if (prot)
+					printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+				/* reset the flash */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RST);
+				/* Disable interrupts which might cause a timeout here */
+				flag = disable_interrupts ();
+				/* Clear the status register */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_CLR_STAT);
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RST);
+				/* Start erase on unprotected sectors */
+				for (sect = s_first; sect <= s_last; sect++) {
+					/* is the sector unprotected? */
+					if (info->protect[sect] == 0) {	/* not protected */
+						/* issue the single block erase command, 0x20 */
+						flash_cmd (info->portwidth,
+							   (volatile unsigned
+							    char *) info->
+							   start[sect], 0,
+							   CHIP_CMD_ERASE1);
+						/* issue the erase confirm command, 0xD0 */
+						flash_cmd (info->portwidth,
+							   (volatile unsigned
+							    char *) info->
+							   start[sect], 0,
+							   CHIP_CMD_ERASE2);
+						l_sect = sect;
+						/* re-enable interrupts if necessary */
+						if (flag)
+							enable_interrupts ();
+						/* poll for erasure completion */
+						/* put flash into read status mode by writing 0x70 to it */
+						flash_cmd (info->portwidth,
+							   addr, 0,
+							   CHIP_CMD_RD_STAT);
+						/* setup the status register mask */
+						mask = CHIP_STAT_RDY |
+							(CHIP_STAT_RDY << 16);
+						/* init. the timeout counter */
+						start = get_timer (0);
+						/* keep looping while the flash is not ready */
+						/* exit the loop by timing out or the flash */
+						/* becomes ready again */
+						timeout = 0;
+						while ((*
+							(volatile unsigned
+							 long *) info->
+							start[sect] & mask) !=
+						       mask) {
+							/* has the timeout limit been reached? */
+							if (get_timer (start)
+							    >
+							    CFG_FLASH_ERASE_TOUT)
+							{
+								/* timeout limit reached */
+								printf ("Time out limit reached erasing sector at address %08lx\n", info->start[sect]);
+								printf ("Continuing with next sector\n");
+								timeout = 1;
+								goto timed_out_error;
+							}
+							/* put flash into read status mode by writing 0x70 to it */
+							flash_cmd (info->
+								   portwidth,
+								   addr, 0,
+								   CHIP_CMD_RD_STAT);
+						}
+						/* did we timeout? */
+					      timed_out_error:if (timeout == 0)
+						{
+							/* didn't timeout, so check the status register */
+							/* create the status mask to check for errors */
+							mask = CHIP_STAT_ECLBS;
+							mask = mask | (mask <<
+								       16);
+							/* put flash into read status mode by writing 0x70 to it */
+							flash_cmd (info->
+								   portwidth,
+								   addr, 0,
+								   CHIP_CMD_RD_STAT);
+							/* are there any errors? */
+							if ((*
+							     (volatile
+							      unsigned long *)
+							     info->
+							     start[sect] &
+							     mask) != 0) {
+								/* We got an erasure error */
+								printf ("Flash erasure error at address 0x%08lx\n", info->start[sect]);
+								printf ("Continuing with next sector\n");
+								/* reset the flash */
+								flash_cmd
+									(info->
+									 portwidth,
+									 addr,
+									 0,
+									 CHIP_CMD_RST);
+							}
+						}
+						/* erasure completed without errors */
+						/* reset the flash */
+						flash_cmd (info->portwidth,
+							   addr, 0,
+							   CHIP_CMD_RST);
+					}	/* end if not protected */
+				}	/* end for loop */
+				printf ("Flash erasure done\n");
+				return 0;
+			} else {
+				/* The Intel flash is not 16-bit wide */
+				/* print and error message and return */
+				/* NOTE: you can add routines here to handle other size flash */
+				printf ("Error: Intel flash device is only %d-bits wide\n", info->chipwidth * 8);
+				printf ("The erasure code only handles Intel 16-bit wide flash memory\n");
+				return 1;
+			}
+		} else {
+			/* Not Intel flash so return an error as a write timeout */
+			/* NOTE: if it's another type flash, stick its routine here */
+			printf ("Error: The flash device is not Intel type\n");
+			printf ("The erasure code only supports Intel flash in a 32-bit port width\n");
+			return 1;
+		}
+	}
+
+	/* end 32-bit wide flash code */
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM)
+		return 1;	/* Rom can not be erased */
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {	/* RAM just copy 0s to RAM */
+		for (sect = s_first; sect <= s_last; sect++) {
+			int sector_size = info->size / info->sector_count;
+
+			addr = (char *) (info->start[sect]);
+			memset ((void *) addr, 0, sector_size);
+		}
+		return 0;
+	}
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {	/* Intel works spezial */
+		return flash_erase_intel (info,
+					  (unsigned short) s_first,
+					  (unsigned short) s_last);
+	}
+#if 0
+	if ((info->flash_id == FLASH_UNKNOWN) ||	/* Flash is unknown to PPCBoot */
+	    (info->flash_id > FLASH_AMD_COMP)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+#endif
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	flash_cmd (info->portwidth, addr, 0x555, 0xAA);	/* start erase routine */
+	flash_cmd (info->portwidth, addr, 0x2AA, 0x55);
+	flash_cmd (info->portwidth, addr, 0x555, 0x80);
+	flash_cmd (info->portwidth, addr, 0x555, 0xAA);
+	flash_cmd (info->portwidth, addr, 0x2AA, 0x55);
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr = (char *) (info->start[sect]);
+			flash_cmd (info->portwidth, addr, 0, 0x30);
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last = start;
+	addr = (volatile unsigned char *) (info->start[l_sect]);
+	/* broken for 2x16: TODO */
+	while ((addr[0] & 0x80) != 0x80) {
+		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc ('.');
+			last = now;
+		}
+	}
+
+      DONE:
+	/* reset to read mode */
+	addr = (volatile unsigned char *) info->start[0];
+	flash_cmd (info->portwidth, addr, 0, 0xf0);
+	flash_cmd (info->portwidth, addr, 0, 0xf0);
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+/* broken for 2x16: TODO */
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+/* Commented out since the below code should work for 32-bit(2x 16 flash) */
+/* 10-16-2002 P. Marchese */
+/*	if(info->portwidth==4) return 1; */
+/*	if(info->portwidth==4) {
+		printf ("- Warning: writting of 32Bit (2*16Bit i.e. 2*28F640J3A) not supported yet !!!! \n");
+		return 1;
+		}*/
+
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM)
+		return 0;
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
+		memcpy ((void *) addr, src, cnt);
+		return 0;
+	}
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i = 0; i < 4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < 4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_word (info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+/* broken for 2x16: TODO */
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+	volatile unsigned char *addr = (char *) (info->start[0]);
+	ulong start;
+	int flag, i;
+	ulong mask;
+
+/* modified so that it handles 32-bit(2x16 Intel flash programming */
+/* 10-16-2002 P. Marchese */
+
+	if (info->portwidth == 4)
+/*		{
+		printf ("- Warning: writting of 32Bit (2*16Bit i.e. 2*28F640J3A) not supported yet !!!! \n");
+		return 1;
+		}*/
+	{
+		/* make sure it's Intel flash */
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+			/* yup! it's an Intel flash */
+			/* is it 16-bits wide? */
+			if (info->chipwidth == 2) {
+				/* yup! it's 16-bits wide */
+				/* so we know how to program it */
+				/* reset the flash */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RST);
+				/* Disable interrupts which might cause a timeout here */
+				flag = disable_interrupts ();
+				/* Clear the status register */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_CLR_STAT);
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RST);
+				/* 1st cycle of word/byte program */
+				/* write 0x40 to the location to program */
+				flash_cmd (info->portwidth, (char *) dest, 0,
+					   CHIP_CMD_PROG);
+				/* 2nd cycle of word/byte program */
+				/* write the data to the destination address */
+				*(ulong *) dest = data;
+				/* re-enable interrupts if necessary */
+				if (flag)
+					enable_interrupts ();
+				/* setup the status register mask */
+				mask = CHIP_STAT_RDY | (CHIP_STAT_RDY << 16);
+				/* put flash into read status mode by writing 0x70 to it */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RD_STAT);
+				/* init. the timeout counter */
+				start = get_timer (0);
+				/* keep looping while the flash is not ready */
+				/* exit the loop by timing out or the flash */
+				/* becomes ready again */
+/* 11-13-2002 Paul Marchese */
+/* modified while loop conditional statement */
+/* because we were always timing out.  */
+/* there is a type mismatch, "addr[0]" */
+/* returns a byte but "mask" is a 32-bit value */
+				while ((*(volatile unsigned long *) info->
+					start[0] & mask) != mask)
+/* original code */
+/* while (addr[0] & mask) != mask) */
+				{
+					/* has the timeout limit been reached? */
+					if (get_timer (start) >
+					    CFG_FLASH_WRITE_TOUT) {
+						/* timeout limit reached */
+						printf ("Time out limit reached programming address %08lx with data %08lx\n", dest, data);
+						/* reset the flash */
+						flash_cmd (info->portwidth,
+							   addr, 0,
+							   CHIP_CMD_RST);
+						return (1);
+					}
+					/* put flash into read status mode by writing 0x70 to it */
+					flash_cmd (info->portwidth, addr, 0,
+						   CHIP_CMD_RD_STAT);
+				}
+				/* flash is ready, so check the status */
+				/* create the status mask to check for errors */
+				mask = CHIP_STAT_DPS | CHIP_STAT_VPPS |
+					CHIP_STAT_PSLBS;
+				mask = mask | (mask << 16);
+				/* put flash into read status mode by writing 0x70 to it */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RD_STAT);
+				/* are there any errors? */
+				if ((addr[0] & mask) != 0) {
+					/* We got a one of the following errors: */
+					/* Voltage range, Device protect, or programming */
+					/* return the error as a device timeout */
+					/* put flash into read status mode by writing 0x70 to it */
+					flash_cmd (info->portwidth, addr, 0,
+						   CHIP_CMD_RD_STAT);
+					printf ("Flash programming error at address 0x%08lx\n", dest);
+					printf ("Flash status register contains 0x%08lx\n", (unsigned long) addr[0]);
+					/* reset the flash */
+					flash_cmd (info->portwidth, addr, 0,
+						   CHIP_CMD_RST);
+					return 1;
+				}
+				/* write completed without errors */
+				/* reset the flash */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RST);
+				return 0;
+			} else {
+				/* it's not 16-bits wide, so return an error as a write timeout */
+				/* NOTE: you can add routines here to handle other size flash */
+				printf ("Error: Intel flash device is only %d-bits wide\n", info->chipwidth * 8);
+				printf ("The write code only handles Intel 16-bit wide flash memory\n");
+				return 1;
+			}
+		} else {
+			/* not Intel flash so return an error as a write timeout */
+			/* NOTE: if it's another type flash, stick its routine here */
+			printf ("Error: The flash device is not Intel type\n");
+			printf ("The code only supports Intel flash in a 32-bit port width\n");
+			return 1;
+		}
+	}
+
+	/* end of 32-bit flash code */
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM)
+		return 1;
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
+		*(unsigned long *) dest = data;
+		return 0;
+	}
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+		unsigned short low = data & 0xffff;
+		unsigned short hi = (data >> 16) & 0xffff;
+		int ret = write_word_intel ((bank_addr_t) dest, hi);
+
+		if (!ret)
+			ret = write_word_intel ((bank_addr_t) (dest + 2),
+						low);
+
+		return ret;
+	}
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *) dest) & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	/* first, perform an unlock bypass command to speed up flash writes */
+	addr[0x555] = 0xAA;
+	addr[0x2AA] = 0x55;
+	addr[0x555] = 0x20;
+
+	/* write each byte out */
+	for (i = 0; i < 4; i++) {
+		char *data_ch = (char *) &data;
+
+		addr[0] = 0xA0;
+		*(((char *) dest) + i) = data_ch[i];
+		udelay (10);	/* XXX */
+	}
+
+	/* we're done, now do an unlock bypass reset */
+	addr[0] = 0x90;
+	addr[0] = 0x00;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	while ((*((vu_long *) dest) & 0x00800080) != (data & 0x00800080)) {
+		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+	}
+	return (0);
+}