diff options
author | Simon Guinot <simon.guinot@sequanux.org> | 2011-11-21 19:25:47 +0530 |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2011-12-06 23:59:30 +0100 |
commit | 77ea071fefbda70ed21a6f0e7bd34ec215e70d39 (patch) | |
tree | 72bd114929a758873cdeaf075db880e9d5018ee0 /board/LaCie/netspace_v2/netspace_v2.c | |
parent | 5628fb75d10764c377bd7eef9dfb4476f2398ff7 (diff) | |
download | u-boot-imx-77ea071fefbda70ed21a6f0e7bd34ec215e70d39.zip u-boot-imx-77ea071fefbda70ed21a6f0e7bd34ec215e70d39.tar.gz u-boot-imx-77ea071fefbda70ed21a6f0e7bd34ec215e70d39.tar.bz2 |
ARM: remove duplicated code for LaCie boards
This patch groups together all the common functions for LaCie boards:
Ethernet PHY and MAC address initializations.
Moreover the configurations for LaCie Kirkwood boards are merged into
a single file: include/configs/lacie_kw.h
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Diffstat (limited to 'board/LaCie/netspace_v2/netspace_v2.c')
-rw-r--r-- | board/LaCie/netspace_v2/netspace_v2.c | 84 |
1 files changed, 11 insertions, 73 deletions
diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c index 6938a43..fbf020f 100644 --- a/board/LaCie/netspace_v2/netspace_v2.c +++ b/board/LaCie/netspace_v2/netspace_v2.c @@ -21,15 +21,14 @@ */ #include <common.h> -#include <miiphy.h> -#include <netdev.h> #include <command.h> -#include <i2c.h> #include <asm/arch/cpu.h> #include <asm/arch/kirkwood.h> #include <asm/arch/mpp.h> #include <asm/arch/gpio.h> + #include "netspace_v2.h" +#include "../common/common.h" DECLARE_GLOBAL_DATA_PTR; @@ -90,91 +89,29 @@ int board_init(void) return 0; } +#if defined(CONFIG_MISC_INIT_R) int misc_init_r(void) { #if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) if (!getenv("ethaddr")) { - ushort version; uchar mac[6]; - int ret; - - /* I2C-0 for on-board EEPROM */ - i2c_set_bus_num(0); - - /* Check layout version for EEPROM data */ - ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, - (uchar *) &version, 2); - if (ret != 0) { - printf("Error: failed to read I2C EEPROM @%02x\n", - CONFIG_SYS_I2C_EEPROM_ADDR); - return ret; - } - version = be16_to_cpu(version); - if (version < 1 || version > 3) { - printf("Error: unknown version %d for EEPROM data\n", - version); - return -1; - } - - /* Read Ethernet MAC address from EEPROM */ - ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 2, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, mac, 6); - if (ret != 0) { - printf("Error: failed to read I2C EEPROM @%02x\n", - CONFIG_SYS_I2C_EEPROM_ADDR); - return ret; - } - eth_setenv_enetaddr("ethaddr", mac); + if (lacie_read_mac_address(mac) == 0) + eth_setenv_enetaddr("ethaddr", mac); } -#endif /* CONFIG_CMD_I2C && CONFIG_SYS_I2C_EEPROM_ADDR */ - +#endif return 0; } +#endif -void mv_phy_88e1116_init(char *name) -{ - u16 reg; - u16 devadr; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..(%s) could not read PHY dev address\n", __func__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - if (miiphy_read(name, devadr, MII_BMCR, ®) != 0) { - printf("Err..(%s) PHY status read failed\n", __func__); - return; - } - if (miiphy_write(name, devadr, MII_BMCR, reg | 0x8000) != 0) { - printf("Err..(%s) PHY reset failed\n", __func__); - return; - } - - debug("88E1116 Initialized on %s\n", name); -} - +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) /* Configure and initialize PHY */ void reset_phy(void) { mv_phy_88e1116_init("egiga0"); } +#endif +#if defined(CONFIG_KIRKWOOD_GPIO) /* Return GPIO button status */ static int do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -184,3 +121,4 @@ do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD(button, 1, 1, do_read_button, "Return GPIO button status 0=off 1=on", ""); +#endif |