summaryrefslogtreecommitdiff
path: root/board/BuS
diff options
context:
space:
mode:
authorSimon Glass <sjg@chromium.org>2015-08-30 19:19:32 -0600
committerTom Rini <trini@konsulko.com>2015-09-11 17:12:57 -0400
commit6e830dfc1aaa3780422e22c599c77dbcb0575759 (patch)
tree126ebf28c17cb6a10ee8c46c167dd4e72915c42d /board/BuS
parentbee2b99d06014e8c461c2656984b11f97430d6c3 (diff)
downloadu-boot-imx-6e830dfc1aaa3780422e22c599c77dbcb0575759.zip
u-boot-imx-6e830dfc1aaa3780422e22c599c77dbcb0575759.tar.gz
u-boot-imx-6e830dfc1aaa3780422e22c599c77dbcb0575759.tar.bz2
arm: Remove vl_ma2sc board
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'board/BuS')
-rw-r--r--board/BuS/vl_ma2sc/Kconfig12
-rw-r--r--board/BuS/vl_ma2sc/MAINTAINERS7
-rw-r--r--board/BuS/vl_ma2sc/Makefile12
-rw-r--r--board/BuS/vl_ma2sc/vl_ma2sc.c519
4 files changed, 0 insertions, 550 deletions
diff --git a/board/BuS/vl_ma2sc/Kconfig b/board/BuS/vl_ma2sc/Kconfig
deleted file mode 100644
index 848177f..0000000
--- a/board/BuS/vl_ma2sc/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_VL_MA2SC
-
-config SYS_BOARD
- default "vl_ma2sc"
-
-config SYS_VENDOR
- default "BuS"
-
-config SYS_CONFIG_NAME
- default "vl_ma2sc"
-
-endif
diff --git a/board/BuS/vl_ma2sc/MAINTAINERS b/board/BuS/vl_ma2sc/MAINTAINERS
deleted file mode 100644
index b70104d..0000000
--- a/board/BuS/vl_ma2sc/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-VL_MA2SC BOARD
-M: Jens Scharsig <esw@bus-elektronik.de>
-S: Maintained
-F: board/BuS/vl_ma2sc/
-F: include/configs/vl_ma2sc.h
-F: configs/vl_ma2sc_defconfig
-F: configs/vl_ma2sc_ram_defconfig
diff --git a/board/BuS/vl_ma2sc/Makefile b/board/BuS/vl_ma2sc/Makefile
deleted file mode 100644
index d4b24ac..0000000
--- a/board/BuS/vl_ma2sc/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2009-2012
-# Jens Scharsig <esw@bus-elekronik.de>
-# BuS Elektronik GmbH & Co. KG
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += vl_ma2sc.o
diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c
deleted file mode 100644
index e4e1a85..0000000
--- a/board/BuS/vl_ma2sc/vl_ma2sc.c
+++ /dev/null
@@ -1,519 +0,0 @@
-/*
- * (C) Copyright 2009-2012
- * Jens Scharsig <esw@bus-elekronik.de>
- * BuS Elektronik GmbH & Co. KG
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <linux/sizes.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/at91_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_common.h>
-#include <lcd.h>
-#include <i2c.h>
-#include <atmel_lcdc.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_CMD_NAND
-static void vl_ma2sc_nand_hw_init(void)
-{
- unsigned long csa;
- at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0;
- at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX;
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
- at91_set_pio_output(AT91_PIO_PORTA, 13, 1); /* CAN_TX -> H */
- at91_set_pio_output(AT91_PIO_PORTA, 12, 1); /* CAN_STB -> H */
- at91_set_pio_output(AT91_PIO_PORTA, 11, 1); /* CAN_EN -> H */
-
- /* Enable CS3 */
- csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
- writel(csa, &matrix->csa[0]);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
- AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
- &smc->cs[3].setup);
-
- writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
- AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
- &smc->cs[3].pulse);
-
- writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
- &smc->cs[3].cycle);
- writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
- AT91_SMC_MODE_DBW_8 |
- AT91_SMC_MODE_TDF_CYCLE(2),
- &smc->cs[3].mode);
- writel((1 << ATMEL_ID_PIOB) | (1 << ATMEL_ID_PIOCDE),
- &pmc->pcer);
-
- /* Configure RDY/BSY */
-#ifdef CONFIG_SYS_NAND_READY_PIN
- gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
-#endif
- /* Enable NandFlash */
- gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void vl_ma2sc_macb_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
- /* Enable clock */
- writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
-
- at91_phy_reset();
-
- at91_macb_hw_init();
-}
-#endif
-
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 320,
- .vl_row = 240,
- .vl_clk = 6500000,
- .vl_sync = ATMEL_LCDC_INVDVAL_INVERTED |
- ATMEL_LCDC_INVLINE_INVERTED |
- ATMEL_LCDC_INVVD_INVERTED |
- ATMEL_LCDC_INVFRAME_INVERTED,
- .vl_bpix = (ATMEL_LCDC_PIXELSIZE_8 >> 5),
- .vl_tft = 1,
- .vl_hsync_len = 5, /* Horiz Sync Pulse Width */
- .vl_left_margin = 68, /* horiz back porch */
- .vl_right_margin = 20, /* horiz front porch */
- .vl_vsync_len = 2, /* vert Sync Pulse Width */
- .vl_upper_margin = 18, /* vert back porch */
- .vl_lower_margin = 4, /* vert front porch */
- .mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
-}
-
-void lcd_disable(void)
-{
-}
-
-static void vl_ma2sc_lcd_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
- at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */
- at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */
- at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */
-
- at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD0 */
- at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD1 */
- at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */
- at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */
- at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */
- at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */
- at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */
- at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */
-
- at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD9 */
- at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */
- at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */
- at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */
- at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */
- at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */
- at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */
-
- at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD26 */
- at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD17 */
- at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */
- at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */
- at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */
- at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */
- at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */
- at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */
-
- at91_set_pio_output(AT91_PIO_PORTE, 0, 0); /* LCD QXH */
-
- at91_set_pio_output(AT91_PIO_PORTE, 2, 0); /* LCD SHUT */
- at91_set_pio_output(AT91_PIO_PORTE, 3, 1); /* LCD TopBottom */
- at91_set_pio_output(AT91_PIO_PORTE, 4, 0); /* LCD REV */
- at91_set_pio_output(AT91_PIO_PORTE, 5, 1); /* LCD RightLeft */
- at91_set_pio_output(AT91_PIO_PORTE, 6, 0); /* LCD Color Mode CM */
- at91_set_pio_output(AT91_PIO_PORTE, 7, 0); /* LCD BGR */
-
- at91_set_pio_output(AT91_PIO_PORTB, 9, 0); /* LCD CC */
-
- writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
- gd->fb_base = ATMEL_BASE_SRAM0;
-}
-#endif /* Config LCD */
-
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-int board_early_init_f(void)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
- /* Enable clocks for all PIOs */
- writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
- (1 << ATMEL_ID_PIOCDE),
- &pmc->pcer);
-
- at91_seriald_hw_init();
-
- return 0;
-}
-#endif
-
-int board_init(void)
-{
- at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0;
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
- u32 pin;
-
- pin = 0x1F000001;
- writel(pin, &pio->pioa.idr);
- writel(pin, &pio->pioa.pudr);
- writel(pin, &pio->pioa.per);
- writel(pin, &pio->pioa.oer);
- writel(pin, &pio->pioa.sodr);
- writel((1 << 25), &pio->pioa.codr);
-
- pin = 0x1F000100;
- writel(pin, &pio->piob.idr);
- writel(pin, &pio->piob.pudr);
- writel(pin, &pio->piob.per);
- writel(pin, &pio->piob.oer);
- writel(pin, &pio->piob.codr);
- writel((1 << 24), &pio->piob.sodr);
-
- pin = 0x40000000; /* Pullup DRxD enbable */
- writel(pin, &pio->pioc.puer);
-
- pin = 0x0000000F; /* HWversion als Input */
- writel(pin, &pio->piod.idr);
- writel(pin, &pio->piod.puer);
- writel(pin, &pio->piod.per);
- writel(pin, &pio->piod.odr);
- writel(pin, &pio->piod.owdr);
-
- gd->bd->bi_arch_number = MACH_TYPE_VL_MA2SC;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
- writel(CONFIG_SYS_SMC0_MODE0_VAL, &smc->cs[0].setup);
- writel(CONFIG_SYS_SMC0_CYCLE0_VAL, &smc->cs[0].cycle);
- writel(CONFIG_SYS_SMC0_PULSE0_VAL, &smc->cs[0].pulse);
- writel(CONFIG_SYS_SMC0_SETUP0_VAL, &smc->cs[0].setup);
-
-#ifdef CONFIG_CMD_NAND
- vl_ma2sc_nand_hw_init();
-#endif
-#ifdef CONFIG_MACB
- vl_ma2sc_macb_hw_init();
-#endif
-#ifdef CONFIG_USB_OHCI_NEW
- at91_uhp_hw_init();
-#endif
-#ifdef CONFIG_LCD
- vl_ma2sc_lcd_hw_init();
-#endif
- return 0;
-}
-
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
-{
- uchar buffer[8];
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
- u32 pin;
-
- buffer[0] = 0x04;
- buffer[1] = 0x00;
- if (i2c_write(0x68, 0x0E, 1, buffer, 2) != 0)
- puts("error reseting rtc clock\n\0");
-
- /* read hardware version */
-
- pin = (readl(&pio->piod.pdsr) & 0x0F) + 0x44;
- printf("Board: revision %c\n", pin);
- buffer[0] = pin;
- buffer[1] = 0;
- setenv("revision", (char *) buffer);
-
- pin = 0x40000000; /* Pullup DRxD enbable */
- writel(pin, &pio->pioc.puer);
- return 0;
-}
-#endif
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE,
- CONFIG_SYS_SDRAM_SIZE);
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-#ifdef CONFIG_MACB
- /*
- * Initialize ethernet HW addr prior to starting Linux,
- * needed for nfsroot
- */
- eth_init();
-#endif
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *) ATMEL_BASE_EMAC, 0x01);
-#endif
- return rc;
-}
-
-#ifdef CONFIG_SYS_I2C_SOFT
-void i2c_init_board(void)
-{
- u32 pin;
-
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
- u8 sda = (1<<4);
- u8 scl = (1<<5);
-
- writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
- pin = sda | scl;
- writel(pin, &pio->piob.idr); /* Disable Interupt */
- writel(pin, &pio->piob.pudr);
- writel(pin, &pio->piob.per);
- writel(pin, &pio->piob.oer);
- writel(pin, &pio->piob.sodr);
-}
-#endif
-
-void watchdog_reset(void)
-{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
- u32 pin = 0x1; /* PA0 */
-
- if ((readl(&pio->pioa.odsr) & pin) > 0)
- writel(pin, &pio->pioa.codr);
- else
- writel(pin, &pio->pioa.sodr);
-}
-
-void enable_caches(void)
-{
-#ifndef CONFIG_SYS_DCACHE_OFF
- dcache_enable();
-#endif
-}
-
-/*---------------------------------------------------------------------------*/
-
-int do_ledtest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int rcode = 1;
- int row;
- int col;
- u32 pinz;
- u32 pins;
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-
- at91_set_pio_output(AT91_PIO_PORTB, 8, 0); /* LCD DIM */
-
- pins = 0x1F000000;
- writel(pins, &pio->pioa.idr);
- writel(pins, &pio->pioa.pudr);
- writel(pins, &pio->pioa.per);
- writel(pins, &pio->pioa.oer);
- writel(pins, &pio->pioa.sodr);
-
- pinz = 0x1F000000;
- writel(pinz, &pio->piob.idr);
- writel(pinz, &pio->piob.pudr);
- writel(pinz, &pio->piob.per);
- writel(pinz, &pio->piob.oer);
- writel(pinz, &pio->piob.sodr);
-
- for (row = 0; row < 5; row++) {
- for (col = 0; col < 5; col++) {
- writel((0x01000000 << col), &pio->piob.sodr);
- writel((0x01000000 << row), &pio->pioa.codr);
- printf("LED Test %d x %d\n", row, col);
- udelay(1000000);
- writel(pinz, &pio->piob.codr);
- writel(pins, &pio->pioa.sodr);
- }
- }
- return rcode;
-}
-
-void poweroff(void)
-{
- watchdog_reset();
- at91_set_pio_output(AT91_PIO_PORTA, 13, 1); /* CAN_TX -> H */
- udelay(100);
- at91_set_pio_output(AT91_PIO_PORTA, 12, 0); /* CAN_STB -> L */
- udelay(100);
- at91_set_pio_output(AT91_PIO_PORTA, 11, 0); /* CAN_EN -> L */
- udelay(100);
- while (1)
- watchdog_reset();
-}
-
-int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int rcode = 1;
- poweroff();
- return rcode;
-}
-
-int do_beep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int i;
- u32 freq;
- u32 durate;
- int rcode = 1;
-
- freq = 1000;
- durate = 2;
- switch (argc) {
- case 3:
- durate = simple_strtoul(argv[2], NULL, 10);
- case 2:
- freq = simple_strtoul(argv[1], NULL, 10);
- case 1:
- break;
- default:
- cmd_usage(cmdtp);
- rcode = 1;
- break;
- }
- durate = durate * freq;
- freq = 500000 / freq;
- for (i = 0; i < durate; i++) {
- at91_set_pio_output(AT91_PIO_PORTB, 29, 1); /* Sound On*/
- udelay(freq);
- at91_set_pio_output(AT91_PIO_PORTB, 29, 0); /* Sound Off*/
- udelay(freq);
- }
- at91_set_pio_output(AT91_PIO_PORTB, 29, 0); /* Sound Off*/
- return rcode;
-}
-
-int do_keytest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int rcode = 1;
- int row;
- u32 col;
- u32 pinz;
- u32 pins;
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
- writel((1 << ATMEL_ID_PIOA), &pmc->pcer);
-
- pins = 0x001F0000;
- writel(pins, &pio->pioa.idr);
- writel(pins, &pio->pioa.pudr);
- writel(pins, &pio->pioa.per);
- writel(pins, &pio->pioa.odr);
-
- pinz = 0x000F0000;
- writel(pinz, &pio->piob.idr);
- writel(pinz, &pio->piob.pudr);
- writel(pinz, &pio->piob.per);
- writel(pinz, &pio->piob.oer);
- writel(pinz, &pio->piob.codr);
-
- while (1) {
- col = 0;
- for (row = 0; row < 4; row++) {
- writel((0x00010000 << row), &pio->piob.sodr);
- udelay(10000);
- col <<= 4;
- col |= ((readl(&pio->pioa.pdsr) >> 16) & 0xF) ^ 0xF ;
- writel(pinz, &pio->piob.codr);
- }
- printf("Matix: ");
- for (row = 0; row < 16; row++) {
- printf("%1.1d", col & 1);
- col >>= 1;
- }
- printf(" SP %d\r ",
- 1 ^ (1 & (readl(&pio->piob.pdsr) >> 20)));
- if ((1 & (readl(&pio->pioa.pdsr) >> 1)) == 0) {
- /* SHUTDOWN */
- row = 0;
- while (row < 1000) {
- if ((1 & (readl(&pio->pioa.pdsr) >> 1)) == 0)
- row++;
- udelay(100);
- }
- udelay(100000);
- row = 0;
- while (row < 1000) {
- if ((1 & (readl(&pio->pioa.pdsr) >> 1)) > 0) {
- row++;
- udelay(1000);
- }
- }
- poweroff();
- while (1)
- ;
- }
- }
- return rcode;
-}
-
-/*****************************************************************************/
-
-U_BOOT_CMD(
- ledtest, 1, 0, do_ledtest,
- "test ledmatrix",
- "\n"
- );
-
-U_BOOT_CMD(
- keytest, 1, 0, do_keytest,
- "test keymatix and special keys, poweroff on pressing ON key",
- "\n"
- );
-
-U_BOOT_CMD(
- poweroff, 1, 0, do_poweroff,
- "power off",
- "\n"
- );
-
-U_BOOT_CMD(
- beep, 3, 0, do_beep,
- "[freq [duration]]",
- "freq frequence of beep\nduration duration of beep\n"
- );
-
-/*****************************************************************************/