diff options
| author | Heiko Schocher <hs@denx.de> | 2013-09-06 05:21:24 +0200 |
|---|---|---|
| committer | Tom Rini <trini@ti.com> | 2013-11-01 15:30:51 -0400 |
| commit | 660a2e650d718fa01ad0e5da7907c2064c2e3cbe (patch) | |
| tree | 3f0ffe673475dbfea4595435f7f66089bc385b62 /board/Barix/ipam390 | |
| parent | 2fff63c2a5506a4d28b5410b68b470d7c869cb98 (diff) | |
| download | u-boot-imx-660a2e650d718fa01ad0e5da7907c2064c2e3cbe.zip u-boot-imx-660a2e650d718fa01ad0e5da7907c2064c2e3cbe.tar.gz u-boot-imx-660a2e650d718fa01ad0e5da7907c2064c2e3cbe.tar.bz2 | |
arm, da85x: update for the ipam390 board
- switch to correct ecc layout used by the RBL
enable CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
- update default environment
- change A2CR to correct value for UART boot mode
- adapt cs3cfg timings for nand
- change LED bootmode signalization
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>
Diffstat (limited to 'board/Barix/ipam390')
| -rw-r--r-- | board/Barix/ipam390/ipam390-ais-uart.cfg | 2 | ||||
| -rw-r--r-- | board/Barix/ipam390/ipam390.c | 29 |
2 files changed, 10 insertions, 21 deletions
diff --git a/board/Barix/ipam390/ipam390-ais-uart.cfg b/board/Barix/ipam390/ipam390-ais-uart.cfg index e1a99f2..709cf23 100644 --- a/board/Barix/ipam390/ipam390-ais-uart.cfg +++ b/board/Barix/ipam390/ipam390-ais-uart.cfg @@ -109,7 +109,7 @@ CLK2XSRC = 0x00000000 ;NANDFCR = 0x00000000 [EMIF25ASYNC] A1CR = 0x00000000 -A2CR = 0x3FFFFFFE +A2CR = 0x04202110 A3CR = 0x00000000 A4CR = 0x00000000 NANDFCR = 0x00000012 diff --git a/board/Barix/ipam390/ipam390.c b/board/Barix/ipam390/ipam390.c index f3f276e..ae88b42 100644 --- a/board/Barix/ipam390/ipam390.c +++ b/board/Barix/ipam390/ipam390.c @@ -264,7 +264,7 @@ void show_boot_progress(int status) static int green; if (red == 0) - red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_OFF); + red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON); if (red != CONFIG_IPAM390_GPIO_LED_RED) return; if (green == 0) @@ -277,10 +277,10 @@ void show_boot_progress(int status) case BOOTSTAGE_ID_RUN_OS: /* * set normal state - * LED Red : off + * LED Red : on * LED green: off */ - gpio_set_value(red, LED_OFF); + gpio_set_value(red, LED_ON); gpio_set_value(green, LED_OFF); break; case BOOTSTAGE_ID_MAIN_LOOP: @@ -326,23 +326,12 @@ int spl_start_uboot(void) if (!bootmode) if (ret == 0) bootmode = 1; - if (bootmode) { - /* - * Booting U-Boot - * LED Red : on - * LED green: off - */ - init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON); - init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF); - } else { - /* - * Booting Linux - * LED Red : off - * LED green: off - */ - init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_OFF); - init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF); - } + /* + * LED red : on + * LED green: off + */ + init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON); + init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF); return bootmode; } #endif |