tegra: Adjust funcmux config test to permit expansion

We want to support config options other than zero, so move the test to the
end to allow intermediate code to OK such a config.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

2 files changed, 38 insertions, 25 deletions

diff --git a/arch/arm/cpu/armv7/tegra2/funcmux.c b/arch/arm/cpu/armv7/tegra2/funcmux.c
index 140f8a7..d3496c5 100644
--- a/arch/arm/cpu/armv7/tegra2/funcmux.c
+++ b/arch/arm/cpu/armv7/tegra2/funcmux.c
@@ -26,39 +26,43 @@
 
 int funcmux_select(enum periph_id id, int config)
 {
-	if (config != 0) {
-		debug("%s: invalid config %d for periph_id %d", __func__,
-		      config, id);
-		return -1;
-	}
+	int bad_config = config != 0;
+
 	switch (id) {
 	case PERIPH_ID_UART1:
-		pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
-		pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
-		pinmux_tristate_disable(PINGRP_IRRX);
-		pinmux_tristate_disable(PINGRP_IRTX);
-		/*
-		 * Tegra appears to boot with function UARTA pre-selected on
-		 * mux group SDB. If two mux groups are both set to the same
-		 * function, it's unclear which group's pins drive the RX
-		 * signals into the HW module. For UARTA, SDB certainly
-		 * overrides group IRTX in practice. To solve this, configure
-		 * some alternative function on SDB to avoid the conflict. Also,
-		 * tri-state the group to avoid driving any signal onto it until
-		 * we know what's connected.
-		 */
-		pinmux_tristate_enable(PINGRP_SDB);
-		pinmux_set_func(PINGRP_SDB,  PMUX_FUNC_SDIO3);
+		if (config == 0) {
+			pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
+			pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
+			pinmux_tristate_disable(PINGRP_IRRX);
+			pinmux_tristate_disable(PINGRP_IRTX);
+			/*
+			 * Tegra appears to boot with function UARTA pre-
+			 * selected on mux group SDB. If two mux groups are
+			 * both set to the same function, it's unclear which
+			 * group's pins drive the RX signals into the HW.
+			 * For UARTA, SDB certainly overrides group IRTX in
+			 * practice. To solve this, configure some alternative
+			 * function on SDB to avoid the conflict. Also, tri-
+			 * state the group to avoid driving any signal onto it
+			 * until we know what's connected.
+			 */
+			pinmux_tristate_enable(PINGRP_SDB);
+			pinmux_set_func(PINGRP_SDB,  PMUX_FUNC_SDIO3);
+		}
 		break;
 
 	case PERIPH_ID_UART2:
-		pinmux_set_func(PINGRP_UAD, PMUX_FUNC_IRDA);
-		pinmux_tristate_disable(PINGRP_UAD);
+		if (config == 0) {
+			pinmux_set_func(PINGRP_UAD, PMUX_FUNC_IRDA);
+			pinmux_tristate_disable(PINGRP_UAD);
+		}
 		break;
 
 	case PERIPH_ID_UART4:
-		pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
-		pinmux_tristate_disable(PINGRP_GMC);
+		if (config == 0) {
+			pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
+			pinmux_tristate_disable(PINGRP_GMC);
+		}
 		break;
 
 	default:
@@ -66,5 +70,11 @@ int funcmux_select(enum periph_id id, int config)
 		return -1;
 	}
 
+	if (bad_config) {
+		debug("%s: invalid config %d for periph_id %d", __func__,
+		      config, id);
+		return -1;
+	}
+
 	return 0;
 }
diff --git a/arch/arm/include/asm/arch-tegra2/funcmux.h b/arch/arm/include/asm/arch-tegra2/funcmux.h
index 2d724a2..d4f9cfb 100644
--- a/arch/arm/include/asm/arch-tegra2/funcmux.h
+++ b/arch/arm/include/asm/arch-tegra2/funcmux.h
@@ -32,6 +32,9 @@
  * The basic config is 0, and higher numbers indicate different
  * pinmux settings to bring the peripheral out on other pins,
  *
+ * This function also disables tristate for the function's pins,
+ * so that they operate in normal mode.
+ *
  * @param id		Peripheral id
  * @param config	Configuration to use (generally 0)
  * @return 0 if ok, -1 on error (e.g. incorrect id or config)