mx5: lowlevel_init.S: Split init_clock macro

init_clock is currently shared between mx51 and mx53 and it contains lots of
ifdef's which makes it really hard to follow the code.

Split the init_clock between mx51 and mx53 to allow easier readability.

No functional changes are made.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

1 files changed, 65 insertions, 30 deletions

diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index 529e35b..d0bab45 100644
--- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -162,9 +162,9 @@ setup_pll_func:
 .endm
 
 .macro init_clock
+#if defined (CONFIG_MX51)
 	ldr r0, =CCM_BASE_ADDR
 
-#if defined(CONFIG_MX51)
 	/* Gate of clocks to the peripherals first */
 	ldr r1, =0x3FFFFFFF
 	str r1, [r0, #CLKCTL_CCGR0]
@@ -190,21 +190,6 @@ setup_pll_func:
 1:	ldr r1, [r0, #CLKCTL_CDHIPR]
 	cmp r1, #0x0
 	bne 1b
-#else
-	ldr r1, =0x3FFFFFFF
-	str r1, [r0, #CLKCTL_CCGR0]
-	str r4, [r0, #CLKCTL_CCGR1]
-	str r4, [r0, #CLKCTL_CCGR2]
-	str r4, [r0, #CLKCTL_CCGR3]
-	str r4, [r0, #CLKCTL_CCGR7]
-
-	ldr r1, =0x00030000
-	str r1, [r0, #CLKCTL_CCGR4]
-	ldr r1, =0x00FFF030
-	str r1, [r0, #CLKCTL_CCGR5]
-	ldr r1, =0x0F00030F
-	str r1, [r0, #CLKCTL_CCGR6]
-#endif
 
 	/* Switch ARM to step clock */
 	mov r1, #0x4
@@ -217,7 +202,6 @@ setup_pll_func:
 	setup_pll PLL1_BASE_ADDR, 800
 #endif
 
-#if defined(CONFIG_MX51)
 	setup_pll PLL3_BASE_ADDR, 665
 
 	/* Switch peripheral to PLL 3 */
@@ -234,7 +218,7 @@ setup_pll_func:
 	str r1, [r0, #CLKCTL_CBCDR]
 	ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL
 	str r1, [r0, #CLKCTL_CBCMR]
-#endif
+
 	setup_pll PLL3_BASE_ADDR, 216
 
 	/* Set the platform clock dividers */
@@ -244,21 +228,17 @@ setup_pll_func:
 
 	ldr r0, =CCM_BASE_ADDR
 
-#if defined(CONFIG_MX51)
 	/* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */
 	ldr r3, [r4, #ROM_SI_REV]
 	cmp r3, #0x10
 	movls r1, #0x1
 	movhi r1, #0
-#else
-	mov r1, #0
-#endif
+
 	str r1, [r0, #CLKCTL_CACRR]
 
 	/* Switch ARM back to PLL 1 */
 	str r4, [r0, #CLKCTL_CCSR]
 
-#if defined(CONFIG_MX51)
 	/* setup the rest */
 	/* Use lp_apm (24MHz) source for perclk */
 	ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL
@@ -266,7 +246,6 @@ setup_pll_func:
 	/* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */
 	ldr r1, =CONFIG_SYS_CLKTL_CBCDR
 	str r1, [r0, #CLKCTL_CBCDR]
-#endif
 
 	/* Restore the default values in the Gate registers */
 	ldr r1, =0xFFFFFFFF
@@ -277,17 +256,72 @@ setup_pll_func:
 	str r1, [r0, #CLKCTL_CCGR4]
 	str r1, [r0, #CLKCTL_CCGR5]
 	str r1, [r0, #CLKCTL_CCGR6]
-#if defined(CONFIG_MX53)
-	str r1, [r0, #CLKCTL_CCGR7]
-#endif
 
-#if defined(CONFIG_MX51)
 	/* Use PLL 2 for UART's, get 66.5MHz from it */
 	ldr r1, =0xA5A2A020
 	str r1, [r0, #CLKCTL_CSCMR1]
 	ldr r1, =0x00C30321
 	str r1, [r0, #CLKCTL_CSCDR1]
-#elif defined(CONFIG_MX53)
+	/* make sure divider effective */
+1:	ldr r1, [r0, #CLKCTL_CDHIPR]
+	cmp r1, #0x0
+	bne 1b
+
+	str r4, [r0, #CLKCTL_CCDR]
+
+	/* for cko - for ARM div by 8 */
+	mov r1, #0x000A0000
+	add r1, r1, #0x00000F0
+	str r1, [r0, #CLKCTL_CCOSR]
+#else	/* CONFIG_MX53 */
+	ldr r0, =CCM_BASE_ADDR
+
+	/* Gate of clocks to the peripherals first */
+	ldr r1, =0x3FFFFFFF
+	str r1, [r0, #CLKCTL_CCGR0]
+	str r4, [r0, #CLKCTL_CCGR1]
+	str r4, [r0, #CLKCTL_CCGR2]
+	str r4, [r0, #CLKCTL_CCGR3]
+	str r4, [r0, #CLKCTL_CCGR7]
+	ldr r1, =0x00030000
+	str r1, [r0, #CLKCTL_CCGR4]
+	ldr r1, =0x00FFF030
+	str r1, [r0, #CLKCTL_CCGR5]
+	ldr r1, =0x0F00030F
+	str r1, [r0, #CLKCTL_CCGR6]
+
+	/* Switch ARM to step clock */
+	mov r1, #0x4
+	str r1, [r0, #CLKCTL_CCSR]
+
+	setup_pll PLL1_BASE_ADDR, 800
+
+	setup_pll PLL3_BASE_ADDR, 216
+
+	/* Set the platform clock dividers */
+	ldr r0, =ARM_BASE_ADDR
+	ldr r1, =0x00000725
+	str r1, [r0, #0x14]
+
+	ldr r0, =CCM_BASE_ADDR
+
+	mov r1, #0
+	str r1, [r0, #CLKCTL_CACRR]
+
+	/* Switch ARM back to PLL 1 */
+	str r4, [r0, #CLKCTL_CCSR]
+
+	/* Restore the default values in the Gate registers */
+	ldr r1, =0xFFFFFFFF
+	str r1, [r0, #CLKCTL_CCGR0]
+	str r1, [r0, #CLKCTL_CCGR1]
+	str r1, [r0, #CLKCTL_CCGR2]
+	str r1, [r0, #CLKCTL_CCGR3]
+	str r1, [r0, #CLKCTL_CCGR4]
+	str r1, [r0, #CLKCTL_CCGR5]
+	str r1, [r0, #CLKCTL_CCGR6]
+	str r1, [r0, #CLKCTL_CCGR7]
+
 	/* Switch peripheral to PLL2 */
 	ldr r0, =CCM_BASE_ADDR
 	ldr r1, =0x00808145
@@ -306,7 +340,7 @@ setup_pll_func:
 	and r1, r1, #0xffffffc0
 	orr r1, r1, #0x0a
 	str r1, [r0, #CLKCTL_CSCDR1]
-#endif
+
 	/* make sure divider effective */
 1:	ldr r1, [r0, #CLKCTL_CDHIPR]
 	cmp r1, #0x0
@@ -318,6 +352,7 @@ setup_pll_func:
 	mov r1, #0x000A0000
 	add r1, r1, #0x00000F0
 	str r1, [r0, #CLKCTL_CCOSR]
+#endif	/* CONFIG_MX53 */
 .endm
 
 .macro setup_wdog