summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorAlbert ARIBAUD <albert.u.boot@aribaud.net>2014-09-17 23:35:34 +0200
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2014-09-17 23:35:34 +0200
commitc292adae170fa8c27dca75963bdb0a9afc640e57 (patch)
tree3c1e6bddf7b2b6c6bb92a6329714db0850d05702 /arch
parenta7f99bf139b3aaa0d5494693fd0395084355e41a (diff)
parent4c97f16911e229f6d5bbea5bee52449916e5fa92 (diff)
downloadu-boot-imx-c292adae170fa8c27dca75963bdb0a9afc640e57.zip
u-boot-imx-c292adae170fa8c27dca75963bdb0a9afc640e57.tar.gz
u-boot-imx-c292adae170fa8c27dca75963bdb0a9afc640e57.tar.bz2
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig4
-rw-r--r--arch/arm/cpu/armv7/mx6/clock.c107
-rw-r--r--arch/arm/cpu/armv7/mx6/ddr.c277
-rw-r--r--arch/arm/cpu/armv7/mx6/soc.c11
-rw-r--r--arch/arm/dts/Makefile1
-rw-r--r--arch/arm/dts/imx6q-sabreauto.dts13
-rw-r--r--arch/arm/include/asm/arch-mx6/clock.h5
-rw-r--r--arch/arm/include/asm/arch-mx6/imx-regs.h13
-rw-r--r--arch/arm/include/asm/arch-mx6/iomux.h9
-rw-r--r--arch/arm/include/asm/arch-mx6/sys_proto.h5
-rw-r--r--arch/arm/include/asm/imx-common/mxc_i2c.h33
11 files changed, 313 insertions, 165 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 22f0f09..f933123 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -424,6 +424,9 @@ config OMAP54XX
config RMOBILE
bool "Renesas ARM SoCs"
+config TARGET_CM_FX6
+ bool "Support cm_fx6"
+
config TARGET_S5P_GONI
bool "Support s5p_goni"
@@ -579,6 +582,7 @@ source "board/cirrus/edb93xx/Kconfig"
source "board/cm4008/Kconfig"
source "board/cm41xx/Kconfig"
source "board/compulab/cm_t335/Kconfig"
+source "board/compulab/cm_fx6/Kconfig"
source "board/congatec/cgtqmx6eval/Kconfig"
source "board/creative/xfi3/Kconfig"
source "board/davedenx/qong/Kconfig"
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 820b8d5..336e557 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -36,6 +36,35 @@ void enable_ocotp_clk(unsigned char enable)
}
#endif
+#ifdef CONFIG_NAND_MXS
+void setup_gpmi_io_clk(u32 cfg)
+{
+ /* Disable clocks per ERR007177 from MX6 errata */
+ clrbits_le32(&imx_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+ clrbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
+
+ clrsetbits_le32(&imx_ccm->cs2cdr,
+ MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
+ MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
+ cfg);
+
+ setbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
+ setbits_le32(&imx_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+}
+#endif
+
void enable_usboh3_clk(unsigned char enable)
{
u32 reg;
@@ -49,6 +78,67 @@ void enable_usboh3_clk(unsigned char enable)
}
+#if defined(CONFIG_FEC_MXC) && !defined(CONFIG_MX6SX)
+void enable_enet_clk(unsigned char enable)
+{
+ u32 mask = MXC_CCM_CCGR1_ENET_CLK_ENABLE_MASK;
+
+ if (enable)
+ setbits_le32(&imx_ccm->CCGR1, mask);
+ else
+ clrbits_le32(&imx_ccm->CCGR1, mask);
+}
+#endif
+
+#ifdef CONFIG_MXC_UART
+void enable_uart_clk(unsigned char enable)
+{
+ u32 mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK;
+
+ if (enable)
+ setbits_le32(&imx_ccm->CCGR5, mask);
+ else
+ clrbits_le32(&imx_ccm->CCGR5, mask);
+}
+#endif
+
+#ifdef CONFIG_SPI
+/* spi_num can be from 0 - 4 */
+int enable_cspi_clock(unsigned char enable, unsigned spi_num)
+{
+ u32 mask;
+
+ if (spi_num > 4)
+ return -EINVAL;
+
+ mask = MXC_CCM_CCGR_CG_MASK << (spi_num * 2);
+ if (enable)
+ setbits_le32(&imx_ccm->CCGR1, mask);
+ else
+ clrbits_le32(&imx_ccm->CCGR1, mask);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_MMC
+int enable_usdhc_clk(unsigned char enable, unsigned bus_num)
+{
+ u32 mask;
+
+ if (bus_num > 3)
+ return -EINVAL;
+
+ mask = MXC_CCM_CCGR_CG_MASK << (bus_num * 2 + 2);
+ if (enable)
+ setbits_le32(&imx_ccm->CCGR6, mask);
+ else
+ clrbits_le32(&imx_ccm->CCGR6, mask);
+
+ return 0;
+}
+#endif
+
#ifdef CONFIG_SYS_I2C_MXC
/* i2c_num can be from 0 - 2 */
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
@@ -509,6 +599,7 @@ int enable_pcie_clock(void)
struct anatop_regs *anatop_regs =
(struct anatop_regs *)ANATOP_BASE_ADDR;
struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ u32 lvds1_clk_sel;
/*
* Here be dragons!
@@ -518,17 +609,25 @@ int enable_pcie_clock(void)
* marked as ANATOP_MISC1 is actually documented in the PMU section
* of the datasheet as PMU_MISC1.
*
- * Switch LVDS clock source to SATA (0xb), disable clock INPUT and
- * enable clock OUTPUT. This is important for PCI express link that
- * is clocked from the i.MX6.
+ * Switch LVDS clock source to SATA (0xb) on mx6q/dl or PCI (0xa) on
+ * mx6sx, disable clock INPUT and enable clock OUTPUT. This is important
+ * for PCI express link that is clocked from the i.MX6.
*/
#define ANADIG_ANA_MISC1_LVDSCLK1_IBEN (1 << 12)
#define ANADIG_ANA_MISC1_LVDSCLK1_OBEN (1 << 10)
#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK 0x0000001F
+#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF 0xa
+#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF 0xb
+
+ if (is_cpu_type(MXC_CPU_MX6SX))
+ lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF;
+ else
+ lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF;
+
clrsetbits_le32(&anatop_regs->ana_misc1,
ANADIG_ANA_MISC1_LVDSCLK1_IBEN |
ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK,
- ANADIG_ANA_MISC1_LVDSCLK1_OBEN | 0xb);
+ ANADIG_ANA_MISC1_LVDSCLK1_OBEN | lvds1_clk_sel);
/* PCIe reference clock sourced from AXI. */
clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL);
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index 1ab69f6..7b5c1e4 100644
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -184,18 +184,18 @@ void mx6sdl_dram_iocfg(unsigned width,
*/
#define MR(val, ba, cmd, cs1) \
((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
-void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
- const struct mx6_mmdc_calibration *c,
- const struct mx6_ddr3_cfg *m)
+void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
+ const struct mx6_mmdc_calibration *calib,
+ const struct mx6_ddr3_cfg *ddr3_cfg)
{
volatile struct mmdc_p_regs *mmdc0;
volatile struct mmdc_p_regs *mmdc1;
- u32 reg;
+ u32 val;
u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd;
u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl;
u8 todt_idle_off = 0x4; /* from DDR3 Script Aid spreadsheet */
u16 trcd, trc, tras, twr, tmrd, trtp, trp, twtr, trfc, txs, txpr;
- u16 CS0_END;
+ u16 cs0_end;
u16 tdllk = 0x1ff; /* DLL locking time: 512 cycles (JEDEC DDR3) */
u8 coladdr;
int clkper; /* clock period in picoseconds */
@@ -215,13 +215,12 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
clock = 400;
tcwl = 3;
}
- clkper = (1000*1000)/clock; /* ps */
+ clkper = (1000 * 1000) / clock; /* pico seconds */
todtlon = tcwl;
taxpd = tcwl;
tanpd = tcwl;
- tcwl = tcwl;
- switch (m->density) {
+ switch (ddr3_cfg->density) {
case 1: /* 1Gb per chip */
trfc = DIV_ROUND_UP(110000, clkper) - 1;
txs = DIV_ROUND_UP(120000, clkper) - 1;
@@ -240,80 +239,82 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
break;
default:
/* invalid density */
- printf("invalid chip density\n");
+ puts("invalid chip density\n");
hang();
break;
}
txpr = txs;
- switch (m->mem_speed) {
+ switch (ddr3_cfg->mem_speed) {
case 800:
- txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
- tcke = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
- if (m->pagesz == 1) {
+ txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1;
+ tcke = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1;
+ if (ddr3_cfg->pagesz == 1) {
tfaw = DIV_ROUND_UP(40000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1;
} else {
tfaw = DIV_ROUND_UP(50000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1;
}
break;
case 1066:
- txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
- tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
- if (m->pagesz == 1) {
+ txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1;
+ tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1;
+ if (ddr3_cfg->pagesz == 1) {
tfaw = DIV_ROUND_UP(37500, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1;
} else {
tfaw = DIV_ROUND_UP(50000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1;
}
break;
case 1333:
- txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
- tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
- if (m->pagesz == 1) {
+ txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1;
+ tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1;
+ if (ddr3_cfg->pagesz == 1) {
tfaw = DIV_ROUND_UP(30000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1;
} else {
tfaw = DIV_ROUND_UP(45000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1;
}
break;
case 1600:
- txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
- tcke = DIV_ROUND_UP(MAX(3*clkper, 5000), clkper) - 1;
- if (m->pagesz == 1) {
+ txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1;
+ tcke = DIV_ROUND_UP(MAX(3 * clkper, 5000), clkper) - 1;
+ if (ddr3_cfg->pagesz == 1) {
tfaw = DIV_ROUND_UP(30000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1;
} else {
tfaw = DIV_ROUND_UP(40000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1;
}
break;
default:
- printf("invalid memory speed\n");
+ puts("invalid memory speed\n");
hang();
break;
}
- txpdll = DIV_ROUND_UP(MAX(10*clkper, 24000), clkper) - 1;
- tcl = DIV_ROUND_UP(m->trcd, clkper/10) - 3;
- tcksre = DIV_ROUND_UP(MAX(5*clkper, 10000), clkper);
- tcksrx = tcksre;
+ txpdll = DIV_ROUND_UP(MAX(10 * clkper, 24000), clkper) - 1;
+ tcksre = DIV_ROUND_UP(MAX(5 * clkper, 10000), clkper);
taonpd = DIV_ROUND_UP(2000, clkper) - 1;
+ tcksrx = tcksre;
taofpd = taonpd;
- trp = DIV_ROUND_UP(m->trcd, clkper/10) - 1;
+ twr = DIV_ROUND_UP(15000, clkper) - 1;
+ tmrd = DIV_ROUND_UP(MAX(12 * clkper, 15000), clkper) - 1;
+ trc = DIV_ROUND_UP(ddr3_cfg->trcmin, clkper / 10) - 1;
+ tras = DIV_ROUND_UP(ddr3_cfg->trasmin, clkper / 10) - 1;
+ tcl = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 3;
+ trp = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 1;
+ twtr = ROUND(MAX(4 * clkper, 7500) / clkper, 1) - 1;
trcd = trp;
- trc = DIV_ROUND_UP(m->trcmin, clkper/10) - 1;
- tras = DIV_ROUND_UP(m->trasmin, clkper/10) - 1;
- twr = DIV_ROUND_UP(15000, clkper) - 1;
- tmrd = DIV_ROUND_UP(MAX(12*clkper, 15000), clkper) - 1;
- twtr = ROUND(MAX(4*clkper, 7500)/clkper, 1) - 1;
trtp = twtr;
- CS0_END = ((4*i->cs_density) <= 120) ? (4*i->cs_density)+7 : 127;
- debug("density:%d Gb (%d Gb per chip)\n", i->cs_density, m->density);
+ cs0_end = 4 * sysinfo->cs_density - 1;
+
+ debug("density:%d Gb (%d Gb per chip)\n",
+ sysinfo->cs_density, ddr3_cfg->density);
debug("clock: %dMHz (%d ps)\n", clock, clkper);
- debug("memspd:%d\n", m->mem_speed);
+ debug("memspd:%d\n", ddr3_cfg->mem_speed);
debug("tcke=%d\n", tcke);
debug("tcksrx=%d\n", tcksrx);
debug("tcksre=%d\n", tcksre);
@@ -340,11 +341,11 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
debug("twtr=%d\n", twtr);
debug("trrd=%d\n", trrd);
debug("txpr=%d\n", txpr);
- debug("CS0_END=%d\n", CS0_END);
- debug("ncs=%d\n", i->ncs);
- debug("Rtt_wr=%d\n", i->rtt_wr);
- debug("Rtt_nom=%d\n", i->rtt_nom);
- debug("SRT=%d\n", m->SRT);
+ debug("cs0_end=%d\n", cs0_end);
+ debug("ncs=%d\n", sysinfo->ncs);
+ debug("Rtt_wr=%d\n", sysinfo->rtt_wr);
+ debug("Rtt_nom=%d\n", sysinfo->rtt_nom);
+ debug("SRT=%d\n", ddr3_cfg->SRT);
debug("tcl=%d\n", tcl);
debug("twr=%d\n", twr);
@@ -354,142 +355,136 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
* see:
* appnote, ddr3 spreadsheet
*/
- mmdc0->mpwldectrl0 = c->p0_mpwldectrl0;
- mmdc0->mpwldectrl1 = c->p0_mpwldectrl1;
- mmdc0->mpdgctrl0 = c->p0_mpdgctrl0;
- mmdc0->mpdgctrl1 = c->p0_mpdgctrl1;
- mmdc0->mprddlctl = c->p0_mprddlctl;
- mmdc0->mpwrdlctl = c->p0_mpwrdlctl;
- if (i->dsize > 1) {
- mmdc1->mpwldectrl0 = c->p1_mpwldectrl0;
- mmdc1->mpwldectrl1 = c->p1_mpwldectrl1;
- mmdc1->mpdgctrl0 = c->p1_mpdgctrl0;
- mmdc1->mpdgctrl1 = c->p1_mpdgctrl1;
- mmdc1->mprddlctl = c->p1_mprddlctl;
- mmdc1->mpwrdlctl = c->p1_mpwrdlctl;
+ mmdc0->mpwldectrl0 = calib->p0_mpwldectrl0;
+ mmdc0->mpwldectrl1 = calib->p0_mpwldectrl1;
+ mmdc0->mpdgctrl0 = calib->p0_mpdgctrl0;
+ mmdc0->mpdgctrl1 = calib->p0_mpdgctrl1;
+ mmdc0->mprddlctl = calib->p0_mprddlctl;
+ mmdc0->mpwrdlctl = calib->p0_mpwrdlctl;
+ if (sysinfo->dsize > 1) {
+ mmdc1->mpwldectrl0 = calib->p1_mpwldectrl0;
+ mmdc1->mpwldectrl1 = calib->p1_mpwldectrl1;
+ mmdc1->mpdgctrl0 = calib->p1_mpdgctrl0;
+ mmdc1->mpdgctrl1 = calib->p1_mpdgctrl1;
+ mmdc1->mprddlctl = calib->p1_mprddlctl;
+ mmdc1->mpwrdlctl = calib->p1_mpwrdlctl;
}
/* Read data DQ Byte0-3 delay */
- mmdc0->mprddqby0dl = (u32)0x33333333;
- mmdc0->mprddqby1dl = (u32)0x33333333;
- if (i->dsize > 0) {
- mmdc0->mprddqby2dl = (u32)0x33333333;
- mmdc0->mprddqby3dl = (u32)0x33333333;
+ mmdc0->mprddqby0dl = 0x33333333;
+ mmdc0->mprddqby1dl = 0x33333333;
+ if (sysinfo->dsize > 0) {
+ mmdc0->mprddqby2dl = 0x33333333;
+ mmdc0->mprddqby3dl = 0x33333333;
}
- if (i->dsize > 1) {
- mmdc1->mprddqby0dl = (u32)0x33333333;
- mmdc1->mprddqby1dl = (u32)0x33333333;
- mmdc1->mprddqby2dl = (u32)0x33333333;
- mmdc1->mprddqby3dl = (u32)0x33333333;
+
+ if (sysinfo->dsize > 1) {
+ mmdc1->mprddqby0dl = 0x33333333;
+ mmdc1->mprddqby1dl = 0x33333333;
+ mmdc1->mprddqby2dl = 0x33333333;
+ mmdc1->mprddqby3dl = 0x33333333;
}
/* MMDC Termination: rtt_nom:2 RZQ/2(120ohm), rtt_nom:1 RZQ/4(60ohm) */
- reg = (i->rtt_nom == 2) ? 0x00011117 : 0x00022227;
- mmdc0->mpodtctrl = reg;
- if (i->dsize > 1)
- mmdc1->mpodtctrl = reg;
+ val = (sysinfo->rtt_nom == 2) ? 0x00011117 : 0x00022227;
+ mmdc0->mpodtctrl = val;
+ if (sysinfo->dsize > 1)
+ mmdc1->mpodtctrl = val;
/* complete calibration */
- reg = (1 << 11); /* Force measurement on delay-lines */
- mmdc0->mpmur0 = reg;
- if (i->dsize > 1)
- mmdc1->mpmur0 = reg;
+ val = (1 << 11); /* Force measurement on delay-lines */
+ mmdc0->mpmur0 = val;
+ if (sysinfo->dsize > 1)
+ mmdc1->mpmur0 = val;
/* Step 1: configuration request */
mmdc0->mdscr = (u32)(1 << 15); /* config request */
/* Step 2: Timing configuration */
- reg = (trfc << 24) | (txs << 16) | (txp << 13) | (txpdll << 9) |
- (tfaw << 4) | tcl;
- mmdc0->mdcfg0 = reg;
- reg = (trcd << 29) | (trp << 26) | (trc << 21) | (tras << 16) |
- (1 << 15) | /* trpa */
- (twr << 9) | (tmrd << 5) | tcwl;
- mmdc0->mdcfg1 = reg;
- reg = (tdllk << 16) | (trtp << 6) | (twtr << 3) | trrd;
- mmdc0->mdcfg2 = reg;
- reg = (taofpd << 27) | (taonpd << 24) | (tanpd << 20) | (taxpd << 16) |
- (todtlon << 12) | (todt_idle_off << 4);
- mmdc0->mdotc = reg;
- mmdc0->mdasp = CS0_END; /* CS addressing */
+ mmdc0->mdcfg0 = (trfc << 24) | (txs << 16) | (txp << 13) |
+ (txpdll << 9) | (tfaw << 4) | tcl;
+ mmdc0->mdcfg1 = (trcd << 29) | (trp << 26) | (trc << 21) |
+ (tras << 16) | (1 << 15) /* trpa */ |
+ (twr << 9) | (tmrd << 5) | tcwl;
+ mmdc0->mdcfg2 = (tdllk << 16) | (trtp << 6) | (twtr << 3) | trrd;
+ mmdc0->mdotc = (taofpd << 27) | (taonpd << 24) | (tanpd << 20) |
+ (taxpd << 16) | (todtlon << 12) | (todt_idle_off << 4);
+ mmdc0->mdasp = cs0_end; /* CS addressing */
/* Step 3: Configure DDR type */
- reg = (i->cs1_mirror << 19) | (i->walat << 16) | (i->bi_on << 12) |
- (i->mif3_mode << 9) | (i->ralat << 6);
- mmdc0->mdmisc = reg;
+ mmdc0->mdmisc = (sysinfo->cs1_mirror << 19) | (sysinfo->walat << 16) |
+ (sysinfo->bi_on << 12) | (sysinfo->mif3_mode << 9) |
+ (sysinfo->ralat << 6);
/* Step 4: Configure delay while leaving reset */
- reg = (txpr << 16) | (i->sde_to_rst << 8) | (i->rst_to_cke << 0);
- mmdc0->mdor = reg;
+ mmdc0->mdor = (txpr << 16) | (sysinfo->sde_to_rst << 8) |
+ (sysinfo->rst_to_cke << 0);
/* Step 5: Configure DDR physical parameters (density and burst len) */
- coladdr = m->coladdr;
- if (m->coladdr == 8) /* 8-bit COL is 0x3 */
+ coladdr = ddr3_cfg->coladdr;
+ if (ddr3_cfg->coladdr == 8) /* 8-bit COL is 0x3 */
coladdr += 4;
- else if (m->coladdr == 12) /* 12-bit COL is 0x4 */
+ else if (ddr3_cfg->coladdr == 12) /* 12-bit COL is 0x4 */
coladdr += 1;
- reg = (m->rowaddr - 11) << 24 | /* ROW */
- (coladdr - 9) << 20 | /* COL */
- (1 << 19) | /* Burst Length = 8 for DDR3 */
- (i->dsize << 16); /* DDR data bus size */
- mmdc0->mdctl = reg;
+ mmdc0->mdctl = (ddr3_cfg->rowaddr - 11) << 24 | /* ROW */
+ (coladdr - 9) << 20 | /* COL */
+ (1 << 19) | /* Burst Length = 8 for DDR3 */
+ (sysinfo->dsize << 16); /* DDR data bus size */
/* Step 6: Perform ZQ calibration */
- reg = (u32)0xa1390001; /* one-time HW ZQ calib */
- mmdc0->mpzqhwctrl = reg;
- if (i->dsize > 1)
- mmdc1->mpzqhwctrl = reg;
+ val = 0xa1390001; /* one-time HW ZQ calib */
+ mmdc0->mpzqhwctrl = val;
+ if (sysinfo->dsize > 1)
+ mmdc1->mpzqhwctrl = val;
/* Step 7: Enable MMDC with desired chip select */
- reg = mmdc0->mdctl |
- (1 << 31) | /* SDE_0 for CS0 */
- ((i->ncs == 2) ? 1 : 0) << 30; /* SDE_1 for CS1 */
- mmdc0->mdctl = reg;
+ mmdc0->mdctl |= (1 << 31) | /* SDE_0 for CS0 */
+ ((sysinfo->ncs == 2) ? 1 : 0) << 30; /* SDE_1 for CS1 */
/* Step 8: Write Mode Registers to Init DDR3 devices */
- for (cs = 0; cs < i->ncs; cs++) {
+ for (cs = 0; cs < sysinfo->ncs; cs++) {
/* MR2 */
- reg = (i->rtt_wr & 3) << 9 | (m->SRT & 1) << 7 |
+ val = (sysinfo->rtt_wr & 3) << 9 | (ddr3_cfg->SRT & 1) << 7 |
((tcwl - 3) & 3) << 3;
- mmdc0->mdscr = (u32)MR(reg, 2, 3, cs);
+ mmdc0->mdscr = MR(val, 2, 3, cs);
/* MR3 */
- mmdc0->mdscr = (u32)MR(0, 3, 3, cs);
+ mmdc0->mdscr = MR(0, 3, 3, cs);
/* MR1 */
- reg = ((i->rtt_nom & 1) ? 1 : 0) << 2 |
- ((i->rtt_nom & 2) ? 1 : 0) << 6;
- mmdc0->mdscr = (u32)MR(reg, 1, 3, cs);
- reg = ((tcl - 1) << 4) | /* CAS */
+ val = ((sysinfo->rtt_nom & 1) ? 1 : 0) << 2 |
+ ((sysinfo->rtt_nom & 2) ? 1 : 0) << 6;
+ mmdc0->mdscr = MR(val, 1, 3, cs);
+ /* MR0 */
+ val = ((tcl - 1) << 4) | /* CAS */
(1 << 8) | /* DLL Reset */
((twr - 3) << 9); /* Write Recovery */
- /* MR0 */
- mmdc0->mdscr = (u32)MR(reg, 0, 3, cs);
+ mmdc0->mdscr = MR(val, 0, 3, cs);
/* ZQ calibration */
- reg = (1 << 10);
- mmdc0->mdscr = (u32)MR(reg, 0, 4, cs);
+ val = (1 << 10);
+ mmdc0->mdscr = MR(val, 0, 4, cs);
}
/* Step 10: Power down control and self-refresh */
- reg = (tcke & 0x7) << 16 |
- 5 << 12 | /* PWDT_1: 256 cycles */
- 5 << 8 | /* PWDT_0: 256 cycles */
- 1 << 6 | /* BOTH_CS_PD */
- (tcksrx & 0x7) << 3 |
- (tcksre & 0x7);
- mmdc0->mdpdc = reg;
- mmdc0->mapsr = (u32)0x00011006; /* ADOPT power down enabled */
+ mmdc0->mdpdc = (tcke & 0x7) << 16 |
+ 5 << 12 | /* PWDT_1: 256 cycles */
+ 5 << 8 | /* PWDT_0: 256 cycles */
+ 1 << 7 | /* SLOW_PD */
+ 1 << 6 | /* BOTH_CS_PD */
+ (tcksrx & 0x7) << 3 |
+ (tcksre & 0x7);
+ mmdc0->mapsr = 0x00001006; /* ADOPT power down enabled */
/* Step 11: Configure ZQ calibration: one-time and periodic 1ms */
- mmdc0->mpzqhwctrl = (u32)0xa1390003;
- if (i->dsize > 1)
- mmdc1->mpzqhwctrl = (u32)0xa1390003;
+ val = 0xa1390003;
+ mmdc0->mpzqhwctrl = val;
+ if (sysinfo->dsize > 1)
+ mmdc1->mpzqhwctrl = val;
/* Step 12: Configure and activate periodic refresh */
- reg = (1 << 14) | /* REF_SEL: Periodic refresh cycles of 32kHz */
- (7 << 11); /* REFR: Refresh Rate - 8 refreshes */
- mmdc0->mdref = reg;
+ mmdc0->mdref = (1 << 14) | /* REF_SEL: Periodic refresh cycle: 32kHz */
+ (7 << 11); /* REFR: Refresh Rate - 8 refreshes */
/* Step 13: Deassert config request - init complete */
- mmdc0->mdscr = (u32)0x00000000;
+ mmdc0->mdscr = 0x00000000;
/* wait for auto-ZQ calibration to complete */
mdelay(1);
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index ac84a1f..ba21cfe 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -324,10 +324,10 @@ const struct boot_mode soc_boot_modes[] = {
/* reserved value should start rom usb */
{"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)},
{"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
- {"escpi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)},
- {"escpi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},
- {"escpi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)},
- {"escpi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)},
+ {"ecspi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)},
+ {"ecspi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},
+ {"ecspi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)},
+ {"ecspi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)},
/* 4 bit bus width */
{"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
{"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
@@ -430,6 +430,9 @@ void v7_outer_cache_enable(void)
}
#endif
+ /* Must disable the L2 before changing the latency parameters */
+ clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+
writel(0x132, &pl310->pl310_tag_latency_ctrl);
writel(0x132, &pl310->pl310_data_latency_ctrl);
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 1ccd827..5f2b946 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -9,7 +9,6 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5420-smdk5420.dtb \
exynos5420-peach-pit.dtb
-dtb-$(CONFIG_MX6) += imx6q-sabreauto.dtb
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
diff --git a/arch/arm/dts/imx6q-sabreauto.dts b/arch/arm/dts/imx6q-sabreauto.dts
deleted file mode 100644
index 7af2a88..0000000
--- a/arch/arm/dts/imx6q-sabreauto.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/dts-v1/;
-
-/ {
- model = "Freescale i.MX6 Quad SABRE Automotive Board";
- compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
-};
diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
index 339c789..c11674f 100644
--- a/arch/arm/include/asm/arch-mx6/clock.h
+++ b/arch/arm/include/asm/arch-mx6/clock.h
@@ -52,12 +52,17 @@ enum enet_freq {
u32 imx_get_uartclk(void);
u32 imx_get_fecclk(void);
unsigned int mxc_get_clock(enum mxc_clock clk);
+void setup_gpmi_io_clk(u32 cfg);
void enable_ocotp_clk(unsigned char enable);
void enable_usboh3_clk(unsigned char enable);
+void enable_uart_clk(unsigned char enable);
+int enable_cspi_clock(unsigned char enable, unsigned spi_num);
+int enable_usdhc_clk(unsigned char enable, unsigned bus_num);
int enable_sata_clock(void);
int enable_pcie_clock(void);
int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
int enable_spi_clk(unsigned char enable, unsigned spi_num);
void enable_ipu_clock(void);
int enable_fec_anatop_clock(enum enet_freq freq);
+void enable_enet_clk(unsigned char enable);
#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 2631beb..22614fc 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -419,6 +419,19 @@ struct iomuxc {
u32 gpr[14];
};
+struct gpc {
+ u32 cntr;
+ u32 pgr;
+ u32 imr1;
+ u32 imr2;
+ u32 imr3;
+ u32 imr4;
+ u32 isr1;
+ u32 isr2;
+ u32 isr3;
+ u32 isr4;
+};
+
#define IOMUXC_GPR2_COUNTER_RESET_VAL_OFFSET 20
#define IOMUXC_GPR2_COUNTER_RESET_VAL_MASK (3<<IOMUXC_GPR2_COUNTER_RESET_VAL_OFFSET)
#define IOMUXC_GPR2_LVDS_CLK_SHIFT_OFFSET 16
diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h
index f54db69..9b3a91f 100644
--- a/arch/arm/include/asm/arch-mx6/iomux.h
+++ b/arch/arm/include/asm/arch-mx6/iomux.h
@@ -19,6 +19,12 @@
#define IOMUXC_GPR1_TEST_POWERDOWN (1 << 18)
/*
+ * IOMUXC_GPR5 bit fields
+ */
+#define IOMUXC_GPR5_PCIE_BTNRST (1 << 19)
+#define IOMUXC_GPR5_PCIE_PERST (1 << 18)
+
+/*
* IOMUXC_GPR8 bit fields
*/
#define IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_MASK (0x3f << 0)
@@ -35,12 +41,15 @@
/*
* IOMUXC_GPR12 bit fields
*/
+#define IOMUXC_GPR12_RX_EQ_2 (0x2 << 0)
+#define IOMUXC_GPR12_RX_EQ_MASK (0x7 << 0)
#define IOMUXC_GPR12_LOS_LEVEL_9 (0x9 << 4)
#define IOMUXC_GPR12_LOS_LEVEL_MASK (0x1f << 4)
#define IOMUXC_GPR12_APPS_LTSSM_ENABLE (1 << 10)
#define IOMUXC_GPR12_DEVICE_TYPE_EP (0x0 << 12)
#define IOMUXC_GPR12_DEVICE_TYPE_RC (0x4 << 12)
#define IOMUXC_GPR12_DEVICE_TYPE_MASK (0xf << 12)
+#define IOMUXC_GPR12_TEST_POWERDOWN (1 << 30)
/*
* IOMUXC_GPR13 bit fields
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
index 306d699..c35a9051 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -20,8 +20,9 @@ u32 get_cpu_rev(void);
/* returns MXC_CPU_ value */
#define cpu_type(rev) (((rev) >> 12)&0xff)
-/* use with MXC_CPU_ constants */
-#define is_cpu_type(cpu) (cpu_type(get_cpu_rev()) == cpu)
+/* both macros return/take MXC_CPU_ constants */
+#define get_cpu_type() (cpu_type(get_cpu_rev()))
+#define is_cpu_type(cpu) (get_cpu_type() == cpu)
const char *get_imx_type(u32 imxtype);
unsigned imx_ddr_size(void);
diff --git a/arch/arm/include/asm/imx-common/mxc_i2c.h b/arch/arm/include/asm/imx-common/mxc_i2c.h
index 47a9edc..182c2f3 100644
--- a/arch/arm/include/asm/imx-common/mxc_i2c.h
+++ b/arch/arm/include/asm/imx-common/mxc_i2c.h
@@ -19,6 +19,39 @@ struct i2c_pads_info {
struct i2c_pin_ctrl sda;
};
+#if defined(CONFIG_MX6QDL)
+#define I2C_PADS(name, scl_i2c, scl_gpio, scl_gp, sda_i2c, sda_gpio, sda_gp) \
+ struct i2c_pads_info mx6q_##name = { \
+ .scl = { \
+ .i2c_mode = MX6Q_##scl_i2c, \
+ .gpio_mode = MX6Q_##scl_gpio, \
+ .gp = scl_gp, \
+ }, \
+ .sda = { \
+ .i2c_mode = MX6Q_##sda_i2c, \
+ .gpio_mode = MX6Q_##sda_gpio, \
+ .gp = sda_gp, \
+ } \
+ }; \
+ struct i2c_pads_info mx6s_##name = { \
+ .scl = { \
+ .i2c_mode = MX6DL_##scl_i2c, \
+ .gpio_mode = MX6DL_##scl_gpio, \
+ .gp = scl_gp, \
+ }, \
+ .sda = { \
+ .i2c_mode = MX6DL_##sda_i2c, \
+ .gpio_mode = MX6DL_##sda_gpio, \
+ .gp = sda_gp, \
+ } \
+ };
+
+
+#define I2C_PADS_INFO(name) \
+ (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) ? \
+ &mx6q_##name : &mx6s_##name
+#endif
+
void setup_i2c(unsigned i2c_index, int speed, int slave_addr,
struct i2c_pads_info *p);
void bus_i2c_init(void *base, int speed, int slave_addr,