Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

22 files changed, 1982 insertions, 165 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2b899b8..d1c3157 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -580,6 +580,7 @@ config ARCH_ZYNQ
 	select SPL_OF_CONTROL if SPL
 	select DM
 	select DM_ETH
+	select DM_GPIO
 	select SPL_DM if SPL
 	select DM_MMC
 	select DM_SPI
@@ -592,8 +593,6 @@ config ARCH_ZYNQMP
 	select ARM64
 	select DM
 	select OF_CONTROL
-	select DM_ETH
-	select DM_MMC
 	select DM_SERIAL
 
 config TEGRA
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0915e05..aa31fd9 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -81,7 +81,12 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
 	zynq-zc770-xm012.dtb \
 	zynq-zc770-xm013.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += \
-	zynqmp-ep108.dtb
+	zynqmp-ep108.dtb			\
+	zynqmp-zcu102.dtb			\
+	zynqmp-zcu102-revB.dtb			\
+	zynqmp-zc1751-xm015-dc1.dtb		\
+	zynqmp-zc1751-xm016-dc2.dtb		\
+	zynqmp-zc1751-xm019-dc5.dtb
 dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb
 dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb
 dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 2d786f0..a327557 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -96,8 +96,10 @@
 		gpio0: gpio@e000a000 {
 			compatible = "xlnx,zynq-gpio-1.0";
 			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
 			clocks = <&clkc 42>;
 			gpio-controller;
+			interrupt-controller;
 			interrupt-parent = <&intc>;
 			interrupts = <0 20 4>;
 			reg = <0xe000a000 0x1000>;
@@ -270,6 +272,13 @@
 				reg = <0x100 0x100>;
 			};
 
+			rstc: rstc@200 {
+				compatible = "xlnx,zynq-reset";
+				reg = <0x200 0x48>;
+				#reset-cells = <1>;
+				syscon = <&slcr>;
+			};
+
 			pinctrl0: pinctrl@700 {
 				compatible = "xlnx,pinctrl-zynq";
 				reg = <0x700 0x200>;
@@ -297,7 +306,12 @@
 
 		devcfg: devcfg@f8007000 {
 			compatible = "xlnx,zynq-devcfg-1.0";
+			interrupt-parent = <&intc>;
+			interrupts = <0 8 4>;
 			reg = <0xf8007000 0x100>;
+			clocks = <&clkc 12>, <&clkc 15>, <&clkc 16>, <&clkc 17>, <&clkc 18>;
+			clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
+			syscon = <&slcr>;
 		};
 
 		global_timer: timer@f8f00200 {
diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts
index 793ab44..cb238cd 100644
--- a/arch/arm/dts/zynq-microzed.dts
+++ b/arch/arm/dts/zynq-microzed.dts
@@ -1,7 +1,7 @@
 /*
  * Xilinx MicroZED board DTS
  *
- * Copyright (C) 2013 Xilinx, Inc.
+ * Copyright (C) 2013 - 2016 Xilinx, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -15,12 +15,27 @@
 	aliases {
 		serial0 = &uart1;
 		spi0 = &qspi;
+		mmc0 = &sdhci0;
 	};
 
 	memory {
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
 };
 
 &qspi {
@@ -32,3 +47,24 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 528cd27..6585010 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -27,7 +27,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -91,6 +91,8 @@
 	phy-handle = <&ethernet_phy>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem0_default>;
+	phy-reset-gpio = <&gpio0 11 0>;
+	phy-reset-active-low;
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
@@ -128,6 +130,21 @@
 			};
 		};
 
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			adv7511: hdmi-tx@39 {
+				compatible = "adi,adv7511";
+				reg = <0x39>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "yuv422";
+				adi,input-clock = "1x";
+				adi,input-style = <3>;
+				adi,input-justification = "right";
+			};
+		};
+
 		i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -370,6 +387,11 @@
 	};
 };
 
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
 &sdhci0 {
 	u-boot,dm-pre-reloc;
 	status = "okay";
@@ -384,11 +406,6 @@
 	pinctrl-0 = <&pinctrl_uart1_default>;
 };
 
-&qspi {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
 &usb0 {
 	status = "okay";
 	dr_mode = "host";
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index 1610520..d04880a 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -27,7 +27,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -84,6 +84,21 @@
 			};
 		};
 
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			adv7511: hdmi-tx@39 {
+				compatible = "adi,adv7511";
+				reg = <0x39>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "yuv422";
+				adi,input-clock = "1x";
+				adi,input-style = <3>;
+				adi,input-justification = "evenly";
+			};
+		};
+
 		i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -291,6 +306,11 @@
 	};
 };
 
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
 &sdhci0 {
 	u-boot,dm-pre-reloc;
 	status = "okay";
@@ -305,11 +325,6 @@
 	pinctrl-0 = <&pinctrl_uart1_default>;
 };
 
-&qspi {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
 &usb0 {
 	status = "okay";
 	dr_mode = "host";
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index b6982c0..33524cb 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -21,7 +21,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram rw earlyprintk";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -36,27 +36,6 @@
 	};
 };
 
-&spi1 {
-	status = "okay";
-	num-cs = <4>;
-	is-decoded-cs = <0>;
-	flash@0 {
-		compatible = "sst25wf080";
-		reg = <1>;
-		spi-max-frequency = <1000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@test {
-			label = "spi-flash";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
-
-&qspi {
-	status = "okay";
-};
-
 &can0 {
 	status = "okay";
 };
@@ -82,10 +61,31 @@
 
 };
 
+&qspi {
+	status = "okay";
+};
+
 &sdhci0 {
 	status = "okay";
 };
 
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	flash@0 {
+		compatible = "sst25wf080";
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@test {
+			label = "spi-flash";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
+
 &uart1 {
 	u-boot,dm-pre-reloc;
 	status = "okay";
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
index 4fed221..463b14b 100644
--- a/arch/arm/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "zynq-7000.dtsi"
+
 / {
 	compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
 	model = "Xilinx Zynq";
@@ -18,7 +19,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram rw earlyprintk";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
index 8d69f0e..6cab832 100644
--- a/arch/arm/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -20,7 +20,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram rw earlyprintk";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index 77fdfcc..d5bb4ef 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -16,11 +16,12 @@
 		ethernet0 = &gem1;
 		i2c0 = &i2c1;
 		serial0 = &uart0;
-		spi0 = &spi0;
+		spi0 = &qspi;
+		spi1 = &spi0;
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram rw earlyprintk";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -58,6 +59,10 @@
 	};
 };
 
+&qspi {
+	status = "okay";
+};
+
 &spi0 {
 	status = "okay";
 	num-cs = <4>;
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
index ec9b2f7..4363a4f 100644
--- a/arch/arm/dts/zynq-zed.dts
+++ b/arch/arm/dts/zynq-zed.dts
@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -50,17 +50,17 @@
 	};
 };
 
-&sdhci0 {
+&qspi {
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
 
-&uart1 {
+&sdhci0 {
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
 
-&qspi {
+&uart1 {
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts
index d04e962..f8dcf1d 100644
--- a/arch/arm/dts/zynq-zybo.dts
+++ b/arch/arm/dts/zynq-zybo.dts
@@ -26,13 +26,13 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
 	usb_phy0: phy0 {
-		#phy-cells = <0>;
 		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
 		reset-gpios = <&gpio0 46 1>;
 	};
 };
@@ -51,17 +51,17 @@
 	};
 };
 
-&sdhci0 {
+&qspi {
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
 
-&uart1 {
+&sdhci0 {
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
 
-&qspi {
+&uart1 {
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
new file mode 100644
index 0000000..3418909
--- /dev/null
+++ b/arch/arm/dts/zynqmp-clk.dtsi
@@ -0,0 +1,202 @@
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+&amba {
+	clk100: clk100 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	clk125: clk125 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clk200: clk200 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+	};
+
+	clk250: clk250 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+	};
+
+	clk300: clk300 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <300000000>;
+	};
+
+	clk600: clk600 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <600000000>;
+	};
+
+	dp_aclk: clock0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-accuracy = <100>;
+	};
+
+	dp_aud_clk: clock1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+		clock-accuracy = <100>;
+	};
+
+	dpdma_clk: dpdma_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0x0>;
+		clock-frequency = <533000000>;
+	};
+
+	drm_clock: drm_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0x0>;
+		clock-frequency = <262750000>;
+		clock-accuracy = <0x64>;
+	};
+};
+
+&can0 {
+	clocks = <&clk100 &clk100>;
+};
+
+&can1 {
+	clocks = <&clk100 &clk100>;
+};
+
+&fpd_dma_chan1 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan2 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan3 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan4 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan5 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan6 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan7 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan8 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&nand0 {
+	clocks = <&clk100 &clk100>;
+};
+
+&gem0 {
+	clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem1 {
+	clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem2 {
+	clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem3 {
+	clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gpio {
+	clocks = <&clk100>;
+};
+
+&i2c0 {
+	clocks = <&clk100>;
+};
+
+&i2c1 {
+	clocks = <&clk100>;
+};
+
+&qspi {
+	clocks = <&clk300 &clk300>;
+};
+
+&sata {
+	clocks = <&clk250>;
+};
+
+&sdhci0 {
+	clocks = <&clk200 &clk200>;
+};
+
+&sdhci1 {
+	clocks = <&clk200 &clk200>;
+};
+
+&spi0 {
+	clocks = <&clk200 &clk200>;
+};
+
+&spi1 {
+	clocks = <&clk200 &clk200>;
+};
+
+&uart0 {
+	clocks = <&clk100 &clk100>;
+};
+
+&uart1 {
+	clocks = <&clk100 &clk100>;
+};
+
+&usb0 {
+	clocks = <&clk250>, <&clk250>;
+};
+
+&usb1 {
+	clocks = <&clk250>, <&clk250>;
+};
+
+&xilinx_drm {
+	clocks = <&drm_clock>;
+};
+
+&xlnx_dp {
+	clocks = <&dp_aclk>, <&dp_aud_clk>;
+};
+
+&xlnx_dpdma {
+	clocks = <&dpdma_clk>;
+};
+
+&xlnx_dp_snd_codec0 {
+	clocks = <&dp_aud_clk>;
+};
diff --git a/arch/arm/dts/zynqmp-ep108-clk.dtsi b/arch/arm/dts/zynqmp-ep108-clk.dtsi
index f864526..48bb426 100644
--- a/arch/arm/dts/zynqmp-ep108-clk.dtsi
+++ b/arch/arm/dts/zynqmp-ep108-clk.dtsi
@@ -62,6 +62,10 @@
 	clocks = <&i2c_clk>;
 };
 
+&nand0 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
 &qspi {
 	clocks = <&misc_clk &misc_clk>;
 };
diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts
index 754604e..0bbf9a7 100644
--- a/arch/arm/dts/zynqmp-ep108.dts
+++ b/arch/arm/dts/zynqmp-ep108.dts
@@ -10,17 +10,21 @@
 
 /dts-v1/;
 
-/include/ "zynqmp.dtsi"
-/include/ "zynqmp-ep108-clk.dtsi"
+#include "zynqmp.dtsi"
+#include "zynqmp-ep108-clk.dtsi"
 
 / {
 	model = "ZynqMP EP108";
 
 	aliases {
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
 		serial0 = &uart0;
 		spi0 = &qspi;
 		spi1 = &spi0;
 		spi2 = &spi1;
+		usb0 = &usb0;
+		usb1 = &usb1;
 	};
 
 	chosen {
@@ -29,7 +33,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x0 0x0 0x40000000>;
+		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 };
 
@@ -69,10 +73,41 @@
 	};
 };
 
+&nand0 {
+	status = "okay";
+	arasan,has-mdma;
+	num-cs = <1>;
+
+	partition@0 {	/* for testing purpose */
+		label = "nand-fsbl-uboot";
+		reg = <0x0 0x0 0x400000>;
+	};
+	partition@1 {	/* for testing purpose */
+		label = "nand-linux";
+		reg = <0x0 0x400000 0x1400000>;
+	};
+	partition@2 {	/* for testing purpose */
+		label = "nand-device-tree";
+		reg = <0x0 0x1800000 0x400000>;
+	};
+	partition@3 {	/* for testing purpose */
+		label = "nand-rootfs";
+		reg = <0x0 0x1C00000 0x1400000>;
+	};
+	partition@4 {	/* for testing purpose */
+		label = "nand-bitstream";
+		reg = <0x0 0x3000000 0x400000>;
+	};
+	partition@5 {	/* for testing purpose */
+		label = "nand-misc";
+		reg = <0x0 0x3400000 0xFCC00000>;
+	};
+};
+
 &qspi {
 	status = "okay";
 	flash@0 {
-		compatible = "n25q512a11";
+		compatible = "m25p80";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
@@ -101,10 +136,20 @@
 &sata {
 	status = "okay";
 	ceva,broken-gen2;
+	/* SATA Phy OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+	ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+	ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+	ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+	ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+	ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
 };
 
 &sdhci0 {
 	status = "okay";
+	bus-width = <8>;
 };
 
 &sdhci1 {
@@ -151,12 +196,20 @@
 
 &usb0 {
 	status = "okay";
+};
+
+&dwc3_0 {
+	status = "okay";
 	dr_mode = "peripheral";
 	maximum-speed = "high-speed";
 };
 
 &usb1 {
 	status = "okay";
+};
+
+&dwc3_1 {
+	status = "okay";
 	dr_mode = "host";
 	maximum-speed = "high-speed";
 };
diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
new file mode 100644
index 0000000..c68a41b
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -0,0 +1,211 @@
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm015-dc1
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+
+/ {
+	model = "ZynqMP zc1751-xm015-dc1 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		gpio0 = &gpio;
+		i2c0 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+	xlnx,overfetch; /* for testing purpose */
+	xlnx,ratectrl = <0>; /* for testing purpose */
+	xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+	xlnx,ratectrl = <100>; /* for testing purpose */
+	xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&gem3 {
+	status = "okay";
+	local-mac-address = [00 0a 35 00 02 90];
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	phy0: phy@0 {
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	eeprom@55 {
+		compatible = "at,24c64"; /* 24AA64 */
+		reg = <0x55>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80"; /* Micron MT25QU512ABB8ESF */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@qspi-fsbl-uboot { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@qspi-linux { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@qspi-device-tree { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@qspi-rootfs { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA phy OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+/* eMMC */
+&sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	no-1-8-v;       /* for 1.0 silicon */
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&xilinx_drm {
+	status = "okay";
+};
+
+&xlnx_dp {
+	status = "okay";
+};
+
+&xlnx_dp_sub {
+	status = "okay";
+	xlnx,vid-clk-pl;
+};
+
+&xlnx_dp_snd_pcm0 {
+	status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+	status = "okay";
+};
+
+&xlnx_dp_snd_card {
+	status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+	status = "okay";
+};
+
+&xlnx_dpdma {
+	status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
new file mode 100644
index 0000000..3fdfcc8
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -0,0 +1,236 @@
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm016-dc2
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+
+/ {
+	model = "ZynqMP zc1751-xm016-dc2 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		ethernet0 = &gem2;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		usb0 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+	xlnx,overfetch; /* for testing purpose */
+	xlnx,ratectrl = <0>; /* for testing purpose */
+	xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+	xlnx,ratectrl = <100>; /* for testing purpose */
+	xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&gem2 {
+	status = "okay";
+	local-mac-address = [00 0a 35 00 02 90];
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	phy0: phy@5 {
+		reg = <5>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tca6416_u26: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* IRQ not connected */
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&nand0 {
+	status = "okay";
+	arasan,has-mdma;
+	num-cs = <2>;
+
+	partition@0 {	/* for testing purpose */
+		label = "nand-fsbl-uboot";
+		reg = <0x0 0x0 0x400000>;
+	};
+	partition@1 {	/* for testing purpose */
+		label = "nand-linux";
+		reg = <0x0 0x400000 0x1400000>;
+	};
+	partition@2 {	/* for testing purpose */
+		label = "nand-device-tree";
+		reg = <0x0 0x1800000 0x400000>;
+	};
+	partition@3 {	/* for testing purpose */
+		label = "nand-rootfs";
+		reg = <0x0 0x1C00000 0x1400000>;
+	};
+	partition@4 {	/* for testing purpose */
+		label = "nand-bitstream";
+		reg = <0x0 0x3000000 0x400000>;
+	};
+	partition@5 {	/* for testing purpose */
+		label = "nand-misc";
+		reg = <0x0 0x3400000 0xFCC00000>;
+	};
+
+	partition@6 {	/* for testing purpose */
+		label = "nand1-fsbl-uboot";
+		reg = <0x1 0x0 0x400000>;
+	};
+	partition@7 {	/* for testing purpose */
+		label = "nand1-linux";
+		reg = <0x1 0x400000 0x1400000>;
+	};
+	partition@8 {	/* for testing purpose */
+		label = "nand1-device-tree";
+		reg = <0x1 0x1800000 0x400000>;
+	};
+	partition@9 {	/* for testing purpose */
+		label = "nand1-rootfs";
+		reg = <0x1 0x1C00000 0x1400000>;
+	};
+	partition@10 {	/* for testing purpose */
+		label = "nand1-bitstream";
+		reg = <0x1 0x3000000 0x400000>;
+	};
+	partition@11 {	/* for testing purpose */
+		label = "nand1-misc";
+		reg = <0x1 0x3400000 0xFCC00000>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <1>;
+	spi0_flash0: spi0_flash0@0 {
+		compatible = "m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+
+		spi0_flash0@00000000 {
+			label = "spi0_flash0";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <1>;
+	spi1_flash0: spi1_flash0@0 {
+		compatible = "mtd_dataflash";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		spi1_flash0@00000000 {
+			label = "spi1_flash0";
+			reg = <0x0 0x84000>;
+		};
+	};
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
new file mode 100644
index 0000000..d754f9f
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -0,0 +1,121 @@
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm019-dc5
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+/ {
+	model = "ZynqMP zc1751-xm019-dc5 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem1;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		bootargs = "earlycon=cdns,mmio,0xff000000,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+	xlnx,overfetch; /* for testing purpose */
+	xlnx,ratectrl = <0>; /* for testing purpose */
+	xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+	xlnx,ratectrl = <100>; /* for testing purpose */
+	xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&gem1 {
+	status = "okay";
+	local-mac-address = [00 0a 35 00 02 90];
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	phy0: phy@0 {
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+/* FIXME: Add device */
+&i2c0 {
+	status = "okay";
+};
+
+/* FIXME: Add device */
+&i2c1 {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
new file mode 100644
index 0000000..765108e
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -0,0 +1,42 @@
+/*
+ * dts file for Xilinx ZynqMP ZCU102 RevB
+ *
+ * (C) Copyright 2016, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include "zynqmp-zcu102.dts"
+
+/ {
+	model = "ZynqMP ZCU102 RevB";
+};
+
+&gem3 {
+	phy-handle = <&phyc>;
+	phyc: phy@c {
+		reg = <0xc>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+	};
+	/* Cleanup from RevA */
+	/delete-node/ phy@21;
+};
+
+/* Different qspi 512Mbit version */
+
+/* Fix collision with u61 */
+&i2c0 {
+	i2cswitch@75 {
+		i2c@2 {
+			max15303@1b { /* u8 */
+				compatible = "max15303";
+				reg = <0x1b>;
+			};
+			/delete-node/ max15303@20;
+		};
+	};
+};
diff --git a/arch/arm/dts/zynqmp-zcu102.dts b/arch/arm/dts/zynqmp-zcu102.dts
new file mode 100644
index 0000000..de99602
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu102.dts
@@ -0,0 +1,631 @@
+/*
+ * dts file for Xilinx ZynqMP ZCU102
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+
+/ {
+	model = "ZynqMP ZCU102 RevA";
+	compatible = "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+	xlnx,overfetch; /* for testing purpose */
+	xlnx,ratectrl = <0>; /* for testing purpose */
+	xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+	xlnx,ratectrl = <100>; /* for testing purpose */
+	xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+	xlnx,include-sg; /* for testing purpose */
+};
+
+&gem3 {
+	status = "okay";
+	local-mac-address = [00 0a 35 00 02 90];
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	phy0: phy@21 {
+		reg = <21>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tca6416_u97: gpio@20 {
+		/*
+		 * Enable all GTs to out from U-Boot
+		 * i2c mw 20 6 0  - setup IO to output
+		 * i2c mw 20 2 ef - setup output values on pins 0-7
+		 * i2c mw 20 3 ff - setup output values on pins 10-17
+		 */
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - PS_GTR_LAN_SEL0
+		 * 1 - PS_GTR_LAN_SEL1
+		 * 2 - PS_GTR_LAN_SEL2
+		 * 3 - PS_GTR_LAN_SEL3
+		 * 4 - PCI_CLK_DIR_SEL
+		 * 5 - IIC_MUX_RESET_B
+		 * 6 - GEM3_EXP_RESET_B
+		 * 7, 10 - 17 - not connected
+		 */
+
+		gtr_sel0 {
+			gpio-hog;
+			gpios = <0 0>;
+			output-high; /* PCIE = 0, DP = 1 */
+			line-name = "sel0";
+		};
+		gtr_sel1 {
+			gpio-hog;
+			gpios = <1 0>;
+			output-high; /* PCIE = 0, DP = 1 */
+			line-name = "sel1";
+		};
+		gtr_sel2 {
+			gpio-hog;
+			gpios = <2 0>;
+			output-high; /* PCIE = 0, USB0 = 1 */
+			line-name = "sel2";
+		};
+		gtr_sel3 {
+			gpio-hog;
+			gpios = <3 0>;
+			output-high; /* PCIE = 0, SATA = 1 */
+			line-name = "sel3";
+		};
+	};
+
+	tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - VCCPSPLL_EN
+		 * 1 - MGTRAVCC_EN
+		 * 2 - MGTRAVTT_EN
+		 * 3 - VCCPSDDRPLL_EN
+		 * 4 - MIO26_PMU_INPUT_LS
+		 * 5 - PL_PMBUS_ALERT
+		 * 6 - PS_PMBUS_ALERT
+		 * 7 - MAXIM_PMBUS_ALERT
+		 * 10 - PL_DDR4_VTERM_EN
+		 * 11 - PL_DDR4_VPP_2V5_EN
+		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
+		 * 13 - PS_DIMM_SUSPEND_EN
+		 * 14 - PS_DDR4_VTERM_EN
+		 * 15 - PS_DDR4_VPP_2V5_EN
+		 * 16 - 17 - not connected
+		 */
+	};
+
+	i2cswitch@75 { /* u60 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 { /* i2c mw 75 0 1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			ina226@40 { /* u76 */
+				compatible = "ti,ina226";
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+			ina226@41 { /* u77 */
+				compatible = "ti,ina226";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			ina226@42 { /* u78 */
+				compatible = "ti,ina226";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			ina226@43 { /* u87 */
+				compatible = "ti,ina226";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			ina226@44 { /* u85 */
+				compatible = "ti,ina226";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			ina226@45 { /* u86 */
+				compatible = "ti,ina226";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			ina226@46 { /* u93 */
+				compatible = "ti,ina226";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			ina226@47 { /* u88 */
+				compatible = "ti,ina226";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			ina226@4a { /* u15 */
+				compatible = "ti,ina226";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			ina226@4b { /* u92 */
+				compatible = "ti,ina226";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 { /* i2c mw 75 0 1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* PL_PMBUS */
+			ina226@40 { /* u79 */
+				compatible = "ti,ina226";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+			ina226@41 { /* u81 */
+				compatible = "ti,ina226";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			ina226@42 { /* u80 */
+				compatible = "ti,ina226";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			ina226@43 { /* u84 */
+				compatible = "ti,ina226";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			ina226@44 { /* u16 */
+				compatible = "ti,ina226";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			ina226@45 { /* u65 */
+				compatible = "ti,ina226";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			ina226@46 { /* u74 */
+				compatible = "ti,ina226";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			ina226@47 { /* u75 */
+				compatible = "ti,ina226";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@2 { /* i2c mw 75 0 1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* MAXIM_PMBUS - 00 */
+			max15301@a { /* u46 */
+				compatible = "max15301";
+				reg = <0xa>;
+			};
+			max15303@b { /* u4 */
+				compatible = "max15303";
+				reg = <0xb>;
+			};
+			max15303@10 { /* u13 */
+				compatible = "max15303";
+				reg = <0x10>;
+			};
+			max15301@13 { /* u47 */
+				compatible = "max15301";
+				reg = <0x13>;
+			};
+			max15303@14 { /* u7 */
+				compatible = "max15303";
+				reg = <0x14>;
+			};
+			max15303@15 { /* u6 */
+				compatible = "max15303";
+				reg = <0x15>;
+			};
+			max15303@16 { /* u10 */
+				compatible = "max15303";
+				reg = <0x16>;
+			};
+			max15303@17 { /* u9 */
+				compatible = "max15303";
+				reg = <0x17>;
+			};
+			max15301@18 { /* u63 */
+				compatible = "max15301";
+				reg = <0x18>;
+			};
+			max15303@1a { /* u49 */
+				compatible = "max15303";
+				reg = <0x1a>;
+			};
+			max15303@1d { /* u18 */
+				compatible = "max15303";
+				reg = <0x1d>;
+			};
+			max15303@20 { /* u8 */
+				compatible = "max15303";
+				status = "disabled"; /* unreachable */
+				reg = <0x20>;
+			};
+
+/*			drivers/hwmon/pmbus/Kconfig:86:   be called max20751.
+drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
+*/
+			max20751@72 { /* u95 FIXME - not detected */
+				compatible = "max20751";
+				reg = <0x72>;
+			};
+			max20751@73 { /* u96 FIXME - not detected */
+				compatible = "max20751";
+				reg = <0x73>;
+			};
+		};
+		/* Bus 3 is not connected */
+	};
+
+	/* FIXME PL connection - u55 , PMOD - j160 */
+	/* FIXME MSP430F - u41 - not detected */
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	/* FIXME PL i2c via PCA9306 - u45 */
+	/* FIXME MSP430 - u41 - not detected */
+	i2cswitch@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 { /* i2c mw 74 0 1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom@54 { /* u23 */
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+		i2c@1 { /* i2c mw 74 0 2 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator1@36 { /* SI5341 - u69 */
+				compatible = "si5341";
+				reg = <0x36>;
+			};
+
+		};
+		i2c@2 { /* i2c mw 74 0 4 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator2@5d { /* USER SI570 - u42 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+			};
+		};
+		i2c@3 { /* i2c mw 74 0 8 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>; /* copy from zc702 */
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+		i2c@4 { /* i2c mw 74 0 10 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			si5328: clock-generator4@69 {/* SI5328 - u20 */
+				compatible = "silabs,si5328";
+				reg = <0x69>;
+			};
+		};
+		/* 5 - 7 unconnected */
+	};
+
+	i2cswitch@75 {
+		compatible = "nxp,pca9548"; /* u135 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* HPC0_IIC */
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* HPC1_IIC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 { /* i2c mw 75 0 8 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+			dev@19 { /* u-boot detection */
+				compatible = "xxx";
+				reg = <0x19>;
+			};
+			dev@30 { /* u-boot detection */
+				compatible = "xxx";
+				reg = <0x30>;
+			};
+			dev@35 { /* u-boot detection */
+				compatible = "xxx";
+				reg = <0x35>;
+			};
+			dev@36 { /* u-boot detection */
+				compatible = "xxx";
+				reg = <0x36>;
+			};
+			dev@51 { /* u-boot detection - maybe SPD */
+				compatible = "xxx";
+				reg = <0x51>;
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SEP 3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SEP 2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SEP 1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SEP 0 */
+		};
+	};
+};
+
+&pcie {
+/*	status = "okay"; */
+};
+
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+		partition@qspi-fsbl-uboot { /* for testing purpose */
+			label = "qspi-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@qspi-linux { /* for testing purpose */
+			label = "qspi-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@qspi-device-tree { /* for testing purpose */
+			label = "qspi-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@qspi-rootfs { /* for testing purpose */
+			label = "qspi-rootfs";
+			reg = <0x620000 0x5E0000>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	no-1-8-v;	/* for 1.0 silicon */
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&xilinx_drm {
+	status = "okay";
+	clocks = <&si570_1>;
+};
+
+&xlnx_dp {
+	status = "okay";
+};
+
+&xlnx_dp_sub {
+	status = "okay";
+	xlnx,vid-clk-pl;
+};
+
+&xlnx_dp_snd_pcm0 {
+	status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+	status = "okay";
+};
+
+&xlnx_dp_snd_card {
+	status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+	status = "okay";
+};
+
+&xlnx_dpdma {
+	status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 8733604..fb95b48 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -10,7 +10,7 @@
 / {
 	compatible = "xlnx,zynqmp";
 	#address-cells = <2>;
-	#size-cells = <1>;
+	#size-cells = <2>;
 
 	cpus {
 		#address-cells = <1>;
@@ -45,8 +45,179 @@
 		};
 	};
 
+	power-domains {
+		compatible = "xlnx,zynqmp-genpd";
+
+		pd_usb0: pd-usb0 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x16>;
+		};
+
+		pd_usb1: pd-usb1 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x17>;
+		};
+
+		pd_sata: pd-sata {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x1c>;
+		};
+
+		pd_spi0: pd-spi0 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x23>;
+		};
+
+		pd_spi1: pd-spi1 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x24>;
+		};
+
+		pd_uart0: pd-uart0 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x21>;
+		};
+
+		pd_uart1: pd-uart1 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x22>;
+		};
+
+		pd_eth0: pd-eth0 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x1d>;
+		};
+
+		pd_eth1: pd-eth1 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x1e>;
+		};
+
+		pd_eth2: pd-eth2 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x1f>;
+		};
+
+		pd_eth3: pd-eth3 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x20>;
+		};
+
+		pd_i2c0: pd-i2c0 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x25>;
+		};
+
+		pd_i2c1: pd-i2c1 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x26>;
+		};
+
+		pd_dp: pd-dp {
+			/* fixme: what to attach to */
+			#power-domain-cells = <0x0>;
+			pd-id = <0x29>;
+		};
+
+		pd_gdma: pd-gdma {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x2a>;
+		};
+
+		pd_adma: pd-adma {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x2b>;
+		};
+
+		pd_ttc0: pd-ttc0 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x18>;
+		};
+
+		pd_ttc1: pd-ttc1 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x19>;
+		};
+
+		pd_ttc2: pd-ttc2 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x1a>;
+		};
+
+		pd_ttc3: pd-ttc3 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x1b>;
+		};
+
+		pd_sd0: pd-sd0 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x27>;
+		};
+
+		pd_sd1: pd-sd1 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x28>;
+		};
+
+		pd_nand: pd-nand {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x2c>;
+		};
+
+		pd_qspi: pd-qspi {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x2d>;
+		};
+
+		pd_gpio: pd-gpio {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x2e>;
+		};
+
+		pd_can0: pd-can0 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x2f>;
+		};
+
+		pd_can1: pd-can1 {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x30>;
+		};
+
+		pd_ddr: pd-ddr {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x37>;
+		};
+
+		pd_apll: pd-apll {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x32>;
+		};
+
+		pd_vpll: pd-vpll {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x33>;
+		};
+
+		pd_dpll: pd-dpll {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x34>;
+		};
+
+		pd_rpll: pd-rpll {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x35>;
+		};
+
+		pd_iopll: pd-iopll {
+			#power-domain-cells = <0x0>;
+			pd-id = <0x36>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&gic>;
 		interrupts = <0 143 4>,
 			     <0 144 4>,
 			     <0 145 4>,
@@ -76,7 +247,7 @@
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0 0 0 0 0xffffffff>;
 
 		gic: interrupt-controller@f9010000 {
 			compatible = "arm,gic-400", "arm,cortex-a15-gic";
@@ -95,7 +266,7 @@
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0 0 0 0 0xffffffff>;
 
 		can0: can@ff060000 {
 			compatible = "xlnx,zynq-can-1.0";
@@ -106,6 +277,7 @@
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
+			power-domains = <&pd_can0>;
 		};
 
 		can1: can@ff070000 {
@@ -117,6 +289,26 @@
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
+			power-domains = <&pd_can1>;
+		};
+
+		cci: cci@fd6e0000 {
+			compatible = "arm,cci-400";
+			reg = <0x0 0xfd6e0000 0x9000>;
+			ranges = <0x0 0x0 0xfd6e0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupt-parent = <&gic>;
+				interrupts = <0 123 4>,
+					     <0 123 4>,
+					     <0 123 4>,
+					     <0 123 4>,
+					     <0 123 4>;
+			};
 		};
 
 		/* GDMA */
@@ -126,8 +318,10 @@
 			reg = <0x0 0xfd500000 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 124 4>;
+			clock-names = "clk_main", "clk_apb";
 			xlnx,id = <0>;
 			xlnx,bus-width = <128>;
+			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan2: dma@fd510000 {
@@ -136,8 +330,10 @@
 			reg = <0x0 0xfd510000 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 125 4>;
+			clock-names = "clk_main", "clk_apb";
 			xlnx,id = <1>;
 			xlnx,bus-width = <128>;
+			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan3: dma@fd520000 {
@@ -146,8 +342,10 @@
 			reg = <0x0 0xfd520000 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 126 4>;
+			clock-names = "clk_main", "clk_apb";
 			xlnx,id = <2>;
 			xlnx,bus-width = <128>;
+			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan4: dma@fd530000 {
@@ -156,8 +354,10 @@
 			reg = <0x0 0xfd530000 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 127 4>;
+			clock-names = "clk_main", "clk_apb";
 			xlnx,id = <3>;
 			xlnx,bus-width = <128>;
+			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan5: dma@fd540000 {
@@ -166,8 +366,10 @@
 			reg = <0x0 0xfd540000 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 128 4>;
+			clock-names = "clk_main", "clk_apb";
 			xlnx,id = <4>;
 			xlnx,bus-width = <128>;
+			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan6: dma@fd550000 {
@@ -176,8 +378,10 @@
 			reg = <0x0 0xfd550000 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 129 4>;
+			clock-names = "clk_main", "clk_apb";
 			xlnx,id = <5>;
 			xlnx,bus-width = <128>;
+			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan7: dma@fd560000 {
@@ -186,8 +390,10 @@
 			reg = <0x0 0xfd560000 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 130 4>;
+			clock-names = "clk_main", "clk_apb";
 			xlnx,id = <6>;
 			xlnx,bus-width = <128>;
+			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan8: dma@fd570000 {
@@ -196,8 +402,10 @@
 			reg = <0x0 0xfd570000 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 131 4>;
+			clock-names = "clk_main", "clk_apb";
 			xlnx,id = <7>;
 			xlnx,bus-width = <128>;
+			power-domains = <&pd_gdma>;
 		};
 
 		gpu: gpu@fd4b0000 {
@@ -218,6 +426,7 @@
 			interrupts = <0 77 4>;
 			xlnx,id = <0>;
 			xlnx,bus-width = <64>;
+			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan2: dma@ffa90000 {
@@ -228,6 +437,7 @@
 			interrupts = <0 78 4>;
 			xlnx,id = <1>;
 			xlnx,bus-width = <64>;
+			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan3: dma@ffaa0000 {
@@ -238,6 +448,7 @@
 			interrupts = <0 79 4>;
 			xlnx,id = <2>;
 			xlnx,bus-width = <64>;
+			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan4: dma@ffab0000 {
@@ -248,6 +459,7 @@
 			interrupts = <0 80 4>;
 			xlnx,id = <3>;
 			xlnx,bus-width = <64>;
+			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan5: dma@ffac0000 {
@@ -258,6 +470,7 @@
 			interrupts = <0 81 4>;
 			xlnx,id = <4>;
 			xlnx,bus-width = <64>;
+			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan6: dma@ffad0000 {
@@ -268,6 +481,7 @@
 			interrupts = <0 82 4>;
 			xlnx,id = <5>;
 			xlnx,bus-width = <64>;
+			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan7: dma@ffae0000 {
@@ -278,6 +492,7 @@
 			interrupts = <0 83 4>;
 			xlnx,id = <6>;
 			xlnx,bus-width = <64>;
+			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan8: dma@ffaf0000 {
@@ -288,6 +503,14 @@
 			interrupts = <0 84 4>;
 			xlnx,id = <7>;
 			xlnx,bus-width = <64>;
+			power-domains = <&pd_adma>;
+		};
+
+		mc: memory-controller@fd070000 {
+			compatible = "xlnx,zynqmp-ddrc-2.40a";
+			reg = <0x0 0xfd070000 0x30000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 112 4>;
 		};
 
 		nand0: nand@ff100000 {
@@ -299,10 +522,11 @@
 			interrupts = <0 14 4>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			power-domains = <&pd_nand>;
 		};
 
 		gem0: ethernet@ff0b0000 {
-			compatible = "cdns,gem";
+			compatible = "cdns,zynqmp-gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 57 4>, <0 57 4>;
@@ -310,12 +534,12 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			jumbo-max-len = <10240>;
-			jumbo-supported;
+			#stream-id-cells = <1>;
+			power-domains = <&pd_eth0>;
 		};
 
 		gem1: ethernet@ff0c0000 {
-			compatible = "cdns,gem";
+			compatible = "cdns,zynqmp-gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 59 4>, <0 59 4>;
@@ -323,12 +547,12 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			jumbo-max-len = <10240>;
-			jumbo-supported;
+			#stream-id-cells = <1>;
+			power-domains = <&pd_eth1>;
 		};
 
 		gem2: ethernet@ff0d0000 {
-			compatible = "cdns,gem";
+			compatible = "cdns,zynqmp-gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 61 4>, <0 61 4>;
@@ -336,12 +560,12 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			jumbo-max-len = <10240>;
-			jumbo-supported;
+			#stream-id-cells = <1>;
+			power-domains = <&pd_eth2>;
 		};
 
 		gem3: ethernet@ff0e0000 {
-			compatible = "cdns,gem";
+			compatible = "cdns,zynqmp-gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 63 4>, <0 63 4>;
@@ -349,17 +573,20 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			jumbo-max-len = <10240>;
-			jumbo-supported;
+			#stream-id-cells = <1>;
+			power-domains = <&pd_eth3>;
 		};
 
 		gpio: gpio@ff0a0000 {
 			compatible = "xlnx,zynqmp-gpio-1.0";
 			status = "disabled";
 			#gpio-cells = <0x2>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
 			interrupt-parent = <&gic>;
 			interrupts = <0 16 4>;
 			reg = <0x0 0xff0a0000 0x1000>;
+			power-domains = <&pd_gpio>;
 		};
 
 		i2c0: i2c@ff020000 {
@@ -370,6 +597,7 @@
 			reg = <0x0 0xff020000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&pd_i2c0>;
 		};
 
 		i2c1: i2c@ff030000 {
@@ -380,6 +608,7 @@
 			reg = <0x0 0xff030000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&pd_i2c1>;
 		};
 
 		pcie: pcie@fd0e0000 {
@@ -390,16 +619,26 @@
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			interrupt-parent = <&gic>;
-			interrupts = < 0 118 4>,
-				     < 0 116 4>,
-				     < 0 115 4>,	/* MSI_1 [63...32] */
-				     < 0 114 4 >;	/* MSI_0 [31...0] */
+			interrupts = <0 118 4>,
+				     <0 116 4>,
+				     <0 115 4>,	/* MSI_1 [63...32] */
+				     <0 114 4>;	/* MSI_0 [31...0] */
 			interrupt-names = "misc", "intx", "msi_1", "msi_0";
 			reg = <0x0 0xfd0e0000 0x1000>,
 			      <0x0 0xfd480000 0x1000>,
 			      <0x0 0xe0000000 0x1000000>;
 			reg-names = "breg", "pcireg", "cfg";
 			ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
 		};
 
 		qspi: spi@ff0f0000 {
@@ -409,9 +648,11 @@
 			interrupts = <0 15 4>;
 			interrupt-parent = <&gic>;
 			num-cs = <1>;
-			reg = <0x0 0xff0f0000 0x1000 0x0 0xc0000000 0x8000000>;
+			reg = <0x0 0xff0f0000 0x1000>,
+			      <0x0 0xc0000000 0x8000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&pd_qspi>;
 		};
 
 		rtc: rtc@ffa60000 {
@@ -429,6 +670,7 @@
 			reg = <0x0 0xfd0c0000 0x2000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 133 4>;
+			power-domains = <&pd_sata>;
 		};
 
 		sdhci0: sdhci@ff160000 {
@@ -438,6 +680,8 @@
 			interrupts = <0 48 4>;
 			reg = <0x0 0xff160000 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
+			broken-tuning;
+			power-domains = <&pd_sd0>;
 		};
 
 		sdhci1: sdhci@ff170000 {
@@ -447,6 +691,8 @@
 			interrupts = <0 49 4>;
 			reg = <0x0 0xff170000 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
+			broken-tuning;
+			power-domains = <&pd_sd1>;
 		};
 
 		smmu: smmu@fd800000 {
@@ -454,11 +700,15 @@
 			reg = <0x0 0xfd800000 0x20000>;
 			#global-interrupts = <1>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 157 4>,
-				<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
-				<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
-				<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
-				<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>;
+			interrupts = <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
+			mmu-masters = < &gem0 0x874
+					&gem1 0x875
+					&gem2 0x876
+					&gem3 0x877 >;
 		};
 
 		spi0: spi@ff040000 {
@@ -470,6 +720,7 @@
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&pd_spi0>;
 		};
 
 		spi1: spi@ff050000 {
@@ -481,6 +732,7 @@
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&pd_spi1>;
 		};
 
 		ttc0: timer@ff110000 {
@@ -490,6 +742,7 @@
 			interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
 			reg = <0x0 0xff110000 0x1000>;
 			timer-width = <32>;
+			power-domains = <&pd_ttc0>;
 		};
 
 		ttc1: timer@ff120000 {
@@ -499,6 +752,7 @@
 			interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
 			reg = <0x0 0xff120000 0x1000>;
 			timer-width = <32>;
+			power-domains = <&pd_ttc1>;
 		};
 
 		ttc2: timer@ff130000 {
@@ -508,6 +762,7 @@
 			interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
 			reg = <0x0 0xff130000 0x1000>;
 			timer-width = <32>;
+			power-domains = <&pd_ttc2>;
 		};
 
 		ttc3: timer@ff140000 {
@@ -517,42 +772,69 @@
 			interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
 			reg = <0x0 0xff140000 0x1000>;
 			timer-width = <32>;
+			power-domains = <&pd_ttc3>;
 		};
 
 		uart0: serial@ff000000 {
-			compatible = "cdns,uart-r1p12";
+			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 21 4>;
 			reg = <0x0 0xff000000 0x1000>;
 			clock-names = "uart_clk", "pclk";
+			power-domains = <&pd_uart0>;
 		};
 
 		uart1: serial@ff010000 {
-			compatible = "cdns,uart-r1p12";
+			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 22 4>;
 			reg = <0x0 0xff010000 0x1000>;
 			clock-names = "uart_clk", "pclk";
+			power-domains = <&pd_uart1>;
 		};
 
 		usb0: usb@fe200000 {
-			compatible = "snps,dwc3";
+			#address-cells = <2>;
+			#size-cells = <1>;
 			status = "disabled";
-			interrupt-parent = <&gic>;
-			interrupts = <0 65 4>;
-			reg = <0x0 0xfe200000 0x40000>;
-			clock-names = "clk_xin", "clk_ahb";
+			compatible = "xlnx,zynqmp-dwc3";
+			clock-names = "bus_clk", "ref_clk";
+			clocks = <&clk125>, <&clk125>;
+			power-domains = <&pd_usb0>;
+			ranges;
+
+			dwc3_0: dwc3@fe200000 {
+				compatible = "snps,dwc3";
+				status = "disabled";
+				reg = <0x0 0xfe200000 0x40000>;
+				interrupt-parent = <&gic>;
+				interrupts = <0 65 4>;
+				/* snps,quirk-frame-length-adjustment = <0x20>; */
+				snps,refclk_fladj;
+			};
 		};
 
 		usb1: usb@fe300000 {
-			compatible = "snps,dwc3";
+			#address-cells = <2>;
+			#size-cells = <1>;
 			status = "disabled";
-			interrupt-parent = <&gic>;
-			interrupts = <0 70 4>;
-			reg = <0x0 0xfe300000 0x40000>;
-			clock-names = "clk_xin", "clk_ahb";
+			compatible = "xlnx,zynqmp-dwc3";
+			clock-names = "bus_clk", "ref_clk";
+			clocks = <&clk125>, <&clk125>;
+			power-domains = <&pd_usb1>;
+			ranges;
+
+			dwc3_1: dwc3@fe300000 {
+				compatible = "snps,dwc3";
+				status = "disabled";
+				reg = <0x0 0xfe300000 0x40000>;
+				interrupt-parent = <&gic>;
+				interrupts = <0 70 4>;
+				/* snps,quirk-frame-length-adjustment = <0x20>; */
+				snps,refclk_fladj;
+			};
 		};
 
 		watchdog0: watchdog@fd4d0000 {
@@ -583,10 +865,11 @@
 			};
 		};
 
-		xlnx_dp: dp@43c00000 {
+		xlnx_dp: dp@fd4a0000 {
 			compatible = "xlnx,v-dp";
 			status = "disabled";
-			reg = <0x0 0xfd4a0000 0x1000>;
+			reg = <0x0 0xfd4a0000 0x1000>,
+			      <0x0 0xfd400000 0x20000>;
 			interrupts = <0 119 4>;
 			interrupt-parent = <&gic>;
 			clock-names = "aclk", "aud_clk";
@@ -599,6 +882,7 @@
 			xlnx,bpc = <8>;
 			xlnx,audio-chan = <2>;
 			xlnx,dp-sub = <&xlnx_dp_sub>;
+			xlnx,max-pclock-frequency = <300000>;
 		};
 
 		xlnx_dp_snd_card: dp_snd_card {
@@ -628,12 +912,16 @@
 			dma-names = "tx";
 		};
 
-		xlnx_dp_sub: dp_sub@43c0a000 {
+		xlnx_dp_sub: dp_sub@fd4aa000 {
 			compatible = "xlnx,dp-sub";
 			status = "disabled";
-			reg = <0x0 0xfd4aa000 0x1000>, <0x0 0xfd4ab000 0x1000>, <0x0 0xfd4ac000 0x1000>;
+			reg = <0x0 0xfd4aa000 0x1000>,
+			      <0x0 0xfd4ab000 0x1000>,
+			      <0x0 0xfd4ac000 0x1000>;
 			reg-names = "blend", "av_buf", "aud";
 			xlnx,output-fmt = "rgb";
+			xlnx,vid-fmt = "yuyv";
+			xlnx,gfx-fmt = "rgb565";
 		};
 
 		xlnx_dpdma: dma@fd4c0000 {
@@ -645,22 +933,22 @@
 			clock-names = "axi_clk";
 			dma-channels = <6>;
 			#dma-cells = <1>;
-			dma-video0channel@43c10000 {
+			dma-video0channel@fd4c0000 {
 				compatible = "xlnx,video0";
 			};
-			dma-video1channel@43c10000 {
+			dma-video1channel@fd4c0000 {
 				compatible = "xlnx,video1";
 			};
-			dma-video2channel@43c10000 {
+			dma-video2channel@fd4c0000 {
 				compatible = "xlnx,video2";
 			};
-			dma-graphicschannel@43c10000 {
+			dma-graphicschannel@fd4c0000 {
 				compatible = "xlnx,graphics";
 			};
-			dma-audio0channel@43c10000 {
+			dma-audio0channel@fd4c0000 {
 				compatible = "xlnx,audio0";
 			};
-			dma-audio1channel@43c10000 {
+			dma-audio1channel@fd4c0000 {
 				compatible = "xlnx,audio1";
 			};
 		};
diff --git a/arch/arm/mach-zynq/include/mach/gpio.h b/arch/arm/mach-zynq/include/mach/gpio.h
index 0789c49..f3dfd65 100644
--- a/arch/arm/mach-zynq/include/mach/gpio.h
+++ b/arch/arm/mach-zynq/include/mach/gpio.h
@@ -8,67 +8,4 @@
 #ifndef _ZYNQ_GPIO_H
 #define _ZYNQ_GPIO_H
 
-#define ZYNQ_GPIO_BASE_ADDRESS 0xE000A000
-
-/* Maximum banks */
-#define ZYNQ_GPIO_MAX_BANK	4
-
-#define ZYNQ_GPIO_BANK0_NGPIO	32
-#define ZYNQ_GPIO_BANK1_NGPIO	22
-#define ZYNQ_GPIO_BANK2_NGPIO	32
-#define ZYNQ_GPIO_BANK3_NGPIO	32
-
-#define ZYNQ_GPIO_NR_GPIOS	(ZYNQ_GPIO_BANK0_NGPIO + \
-				 ZYNQ_GPIO_BANK1_NGPIO + \
-				 ZYNQ_GPIO_BANK2_NGPIO + \
-				 ZYNQ_GPIO_BANK3_NGPIO)
-
-#define ZYNQ_GPIO_BANK0_PIN_MIN	0
-#define ZYNQ_GPIO_BANK0_PIN_MAX	(ZYNQ_GPIO_BANK0_PIN_MIN + \
-					ZYNQ_GPIO_BANK0_NGPIO - 1)
-#define ZYNQ_GPIO_BANK1_PIN_MIN	(ZYNQ_GPIO_BANK0_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK1_PIN_MAX	(ZYNQ_GPIO_BANK1_PIN_MIN + \
-					ZYNQ_GPIO_BANK1_NGPIO - 1)
-#define ZYNQ_GPIO_BANK2_PIN_MIN	(ZYNQ_GPIO_BANK1_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK2_PIN_MAX	(ZYNQ_GPIO_BANK2_PIN_MIN + \
-					ZYNQ_GPIO_BANK2_NGPIO - 1)
-#define ZYNQ_GPIO_BANK3_PIN_MIN	(ZYNQ_GPIO_BANK2_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK3_PIN_MAX	(ZYNQ_GPIO_BANK3_PIN_MIN + \
-					ZYNQ_GPIO_BANK3_NGPIO - 1)
-
-/* Register offsets for the GPIO device */
-/* LSW Mask & Data -WO */
-#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK)	(0x000 + (8 * BANK))
-/* MSW Mask & Data -WO */
-#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK)	(0x004 + (8 * BANK))
-/* Data Register-RW */
-#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK)	(0x060 + (4 * BANK))
-/* Direction mode reg-RW */
-#define ZYNQ_GPIO_DIRM_OFFSET(BANK)	(0x204 + (0x40 * BANK))
-/* Output enable reg-RW */
-#define ZYNQ_GPIO_OUTEN_OFFSET(BANK)	(0x208 + (0x40 * BANK))
-/* Interrupt mask reg-RO */
-#define ZYNQ_GPIO_INTMASK_OFFSET(BANK)	(0x20C + (0x40 * BANK))
-/* Interrupt enable reg-WO */
-#define ZYNQ_GPIO_INTEN_OFFSET(BANK)	(0x210 + (0x40 * BANK))
-/* Interrupt disable reg-WO */
-#define ZYNQ_GPIO_INTDIS_OFFSET(BANK)	(0x214 + (0x40 * BANK))
-/* Interrupt status reg-RO */
-#define ZYNQ_GPIO_INTSTS_OFFSET(BANK)	(0x218 + (0x40 * BANK))
-/* Interrupt type reg-RW */
-#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK)	(0x21C + (0x40 * BANK))
-/* Interrupt polarity reg-RW */
-#define ZYNQ_GPIO_INTPOL_OFFSET(BANK)	(0x220 + (0x40 * BANK))
-/* Interrupt on any, reg-RW */
-#define ZYNQ_GPIO_INTANY_OFFSET(BANK)	(0x224 + (0x40 * BANK))
-
-/* Disable all interrupts mask */
-#define ZYNQ_GPIO_IXR_DISABLE_ALL	0xFFFFFFFF
-
-/* Mid pin number of a bank */
-#define ZYNQ_GPIO_MID_PIN_NUM 16
-
-/* GPIO upper 16 bit mask */
-#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
-
 #endif /* _ZYNQ_GPIO_H */