armv8/ls2085a: Fix generic timer clock source

The timer clock is system clock divided by 4, not fixed 12MHz.
This is common to the SoC, not board specific. Primary core is
fixed when u-boot still runs in board_f. Secondary cores are
fixed by reading a variable set by u-boot.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: Mark Rutland <mark.rutland@arm.com>

4 files changed, 38 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
index 94fd147..e985181 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
@@ -395,3 +395,27 @@ int arch_early_init_r(void)
 
 	return 0;
 }
+
+int timer_init(void)
+{
+	u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
+	u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
+#ifdef COUNTER_FREQUENCY_REAL
+	unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
+
+	/* Update with accurate clock frequency */
+	asm volatile("msr cntfrq_el0, %0" : : "r" (cntfrq) : "memory");
+#endif
+
+	/* Enable timebase for all clusters.
+	 * It is safe to do so even some clusters are not enabled.
+	 */
+	out_le32(cltbenr, 0xf);
+
+	/* Enable clock for timer
+	 * This is a global setting.
+	 */
+	out_le32(cntcr, 0x1);
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
index 886576e..53bdb44 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
@@ -224,6 +224,9 @@ ENTRY(secondary_boot_func)
 	/* physical address of this cpus spin table element */
 	add	x11, x1, x0
 
+	ldr	x0, =__real_cntfrq
+	ldr	x0, [x0]
+	msr	cntfrq_el0, x0	/* set with real frequency */
 	str	x9, [x11, #16]	/* LPID */
 	mov	x4, #1
 	str	x4, [x11, #8]	/* STATUS */
@@ -275,6 +278,9 @@ ENDPROC(secondary_switch_to_el1)
 
 	/* 64 bit alignment for elements accessed as data */
 	.align 4
+	.global __real_cntfrq
+__real_cntfrq:
+	.quad COUNTER_FREQUENCY
 	.globl __secondary_boot_code_size
 	.type __secondary_boot_code_size, %object
 	/* Secondary Boot Code ends here */
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.c b/arch/arm/cpu/armv8/fsl-lsch3/mp.c
index ce9c0c1..da7853a 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/mp.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.c
@@ -31,6 +31,13 @@ int fsl_lsch3_wake_seconday_cores(void)
 	int i, timeout = 10;
 	u64 *table = get_spin_tbl_addr();
 
+#ifdef COUNTER_FREQUENCY_REAL
+	/* update for secondary cores */
+	__real_cntfrq = COUNTER_FREQUENCY_REAL;
+	flush_dcache_range((unsigned long)&__real_cntfrq,
+			   (unsigned long)&__real_cntfrq + 8);
+#endif
+
 	cores = cpu_mask();
 	/* Clear spin table so that secondary processors
 	 * observe the correct value after waking up from wfe.
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.h b/arch/arm/cpu/armv8/fsl-lsch3/mp.h
index 66144d6..c985d6a 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/mp.h
+++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.h
@@ -26,6 +26,7 @@
 #define id_to_core(x)	((x & 3) | (x >> 6))
 #ifndef __ASSEMBLY__
 extern u64 __spin_table[];
+extern u64 __real_cntfrq;
 extern u64 *secondary_boot_code;
 extern size_t __secondary_boot_code_size;
 int fsl_lsch3_wake_seconday_cores(void);