diff options
author | Wolfgang Denk <wd@denx.de> | 2011-10-04 22:08:13 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2011-10-04 22:08:13 +0200 |
commit | 1fed668b3fb9c35932f58af00ff5539239fa4e1d (patch) | |
tree | eaaaead8ca19924af1823caae040f504be9b6d98 /arch | |
parent | c52575350fd6e794717f6bee4f81dbb8038fe22e (diff) | |
parent | 6d7b061af153bc5beb633c3bd15348284716a067 (diff) | |
download | u-boot-imx-1fed668b3fb9c35932f58af00ff5539239fa4e1d.zip u-boot-imx-1fed668b3fb9c35932f58af00ff5539239fa4e1d.tar.gz u-boot-imx-1fed668b3fb9c35932f58af00ff5539239fa4e1d.tar.bz2 |
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
* 'master' of git://git.denx.de/u-boot-mpc85xx:
powerpc/p3060: Add SoC related support for P3060 platform
powerpc/85xx: Add support for setting up RAID engine liodns on P5020
powerpc/85xx: Refactor some defines out of corenet_ds.h
fm-eth: Add ability for board code to disable a port
powerpc/mpc8548: Add workaround for erratum NMG_LBC103
powerpc/mpc8548: Add workaround for erratum NMG_DDR120
powerpc/mpc85xxcds: Fix PCI speed
powerpc/mpc8548cds: Fix booting message
powerpc/p4080: Add support for secure boot flow
powerpc/85xx: Add Secure Boot support on P1010RDB for NOR, NAND & SPIFLASH
powerpc/85xx: Add PBL & SECUREBOOT support on P3041/P5020DS boards
powerpc/p2041rdb: remove watch dog related codes
powerpc/p2041rdb: updated description of cpld command
powerpc/p2041rdb: add more ddr frequencies support
powerpc/p2041rdb: set sysclk according to status of physical switch SW1
powerpc/p2041rdb: update cpld reset command according to CPLD 2.0
powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver
powerpc/mpc83xx: Migrate from spd_sdram to unified DDR driver
powerpc/mpc8xxx: Add DDR2 to unified DDR driver
powerpc/mpc8xxx: Fix picos_to_mclk() and get_memory_clk_period_ps()
powerpc/mpc8xxx: Add SPD EEPROM address for single controller 2 slots
powerpc/mpc8xxx: Fix DDR code for empty first DIMM slot and enable DQS_en
powerpc/85xx: Refactor P2041RDB to use common p_corenet files
powerpc/85xx: refactor common P-Series CoreNet files for FSL boards
powerpc/85xx: Enable CMD_REGINFO on corenet boards
powerpc/85xx: p2041rdb - Remove unused 'execute' perm in TLB entries
powerpc/85xx: Fix USB protocol definitions for P1020RDB
powerpc/corenet_ds: Use separated speed tables for UDIMM and RDIMM
powerpc/mpc8xxx: Move DDR RCW overriding to common code
powerpc/mpc8xxx: Extend CWL table
powerpc/85xx: Cleanup how SVR_MAJ() is defined on MPC8536
powerpc/85xx: Cleanup extern in corenet_ds board code
powerpc/p2041rdb: Add ethernet support on P2041RDB board
powerpc/85xx: Add networking support to P1023RDS
powerpc/hydra: Add ethernet support on P5020/P3041 DS boards
powerpc/85xx: Add FMan ethernet support to P4080DS
powerpc/85xx: Add support for FMan ethernet in Independent mode
powerpc/mpc8548cds: Cleanup mpc8548cds.c
powerpc/mp: add support for discontiguous cores
powerpc/85xx: corenet_ds - Remove unused 'execute' perm in TLB entries
fdt: Add new fdt_create_phandle helper
fdt: Rename fdt_create_phandle to fdt_set_phandle
powerpc/85xx: Fix compile warnings/errors if CONFIG_SYS_DPAA_FMAN isn't set
fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010)
powerpc/P1010: Add workaround for erratum P1010-A003549 (related to IFC)
fsl_ifc: Add the workaround for erratum IFC-A002769 (enable on P1010)
powerpc/85xx: Expanding the window of CCSRBAR in AS=1 from 4k to 1M
powerpc/85xx: Add NAND/NAND_SPL support to P1010RDB
nand: Freescale Integrated Flash Controller NAND support
powerpc/85xx: Add basic support for P1010RDB
powerpc/85xx: Add support for new P102x/P2020 RDB style boards
powerpc/85xx: relocate CCSR before creating the initial RAM area
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros
powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0
powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014
Diffstat (limited to 'arch')
43 files changed, 2283 insertions, 168 deletions
diff --git a/arch/powerpc/cpu/mpc83xx/Makefile b/arch/powerpc/cpu/mpc83xx/Makefile index 3979b6f..b353036 100644 --- a/arch/powerpc/cpu/mpc83xx/Makefile +++ b/arch/powerpc/cpu/mpc83xx/Makefile @@ -34,7 +34,6 @@ COBJS-y += cpu.o COBJS-y += cpu_init.o COBJS-y += speed.o COBJS-y += interrupts.o -COBJS-y += spd_sdram.o COBJS-y += ecc.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_FSL_SERDES) += serdes.o @@ -42,6 +41,13 @@ COBJS-$(CONFIG_PCI) += pci.o COBJS-$(CONFIG_PCIE) += pcie.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o +ifdef CONFIG_FSL_DDR2 +COBJS-$(CONFIG_MPC8349) += ddr-gen2.o +else +COBJS-y += spd_sdram.o +endif +COBJS-$(CONFIG_FSL_DDR2) += law.o + COBJS := $(COBJS-y) SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) @@ -52,6 +58,18 @@ all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) +$(obj)ddr-gen1.c: + @rm -f $(obj)ddr-gen1.c + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen1.c $(obj)ddr-gen1.c + +$(obj)ddr-gen2.c: + @rm -f $(obj)ddr-gen2.c + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen2.c $(obj)ddr-gen2.c + +$(obj)ddr-gen3.c: + @rm -f $(obj)ddr-gen3.c + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen3.c $(obj)ddr-gen3.c + ######################################################################### # defines $(obj).depend target diff --git a/arch/powerpc/cpu/mpc83xx/ecc.c b/arch/powerpc/cpu/mpc83xx/ecc.c index f8eab96..717365c 100644 --- a/arch/powerpc/cpu/mpc83xx/ecc.c +++ b/arch/powerpc/cpu/mpc83xx/ecc.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007 Freescale Semiconductor, Inc. + * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. * * Dave Liu <daveliu@freescale.com> * based on the contribution of Marian Balakowicz <m8@semihalf.com> @@ -20,8 +20,12 @@ #if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) void ecc_print_status(void) { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ddr83xx_t *ddr = &immap->ddr; + immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; +#ifdef CONFIG_FSL_DDR2 + ccsr_ddr_t *ddr = &immap->ddr; +#else + ddr83xx_t *ddr = &immap->ddr; +#endif printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF"); @@ -100,8 +104,12 @@ void ecc_print_status(void) int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ddr83xx_t *ddr = &immap->ddr; + immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; +#ifdef CONFIG_FSL_DDR2 + ccsr_ddr_t *ddr = &immap->ddr; +#else + ddr83xx_t *ddr = &immap->ddr; +#endif volatile u32 val; u64 *addr; u32 count; diff --git a/arch/powerpc/cpu/mpc83xx/law.c b/arch/powerpc/cpu/mpc83xx/law.c new file mode 100644 index 0000000..66c88b6 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/law.c @@ -0,0 +1,61 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id) +{ + immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; + law83xx_t *ecm = &immap->sysconf.ddrlaw[0]; + u64 start_align, law_sz; + int law_sz_enc; + + if (start == 0) + start_align = 1ull << (LAW_SIZE_2G + 1); + else + start_align = 1ull << (ffs64(start) - 1); + law_sz = min(start_align, sz); + law_sz_enc = __ilog2_u64(law_sz) - 1; + + /* + * Set up LAWBAR for all of DDR. + */ + ecm->bar = start & 0xfffff000; + ecm->ar = (LAWAR_EN | (id << 20) | (LAWAR_SIZE & law_sz_enc)); + debug("DDR:bar=0x%08x\n", ecm->bar); + debug("DDR:ar=0x%08x\n", ecm->ar); + + /* recalculate size based on what was actually covered by the law */ + law_sz = 1ull << __ilog2_u64(law_sz); + + /* do we still have anything to map */ + sz = sz - law_sz; + if (sz) { + start += law_sz; + + start_align = 1ull << (ffs64(start) - 1); + law_sz = min(start_align, sz); + law_sz_enc = __ilog2_u64(law_sz) - 1; + ecm = &immap->sysconf.ddrlaw[1]; + ecm->bar = start & 0xfffff000; + ecm->ar = (LAWAR_EN | (id << 20) | (LAWAR_SIZE & law_sz_enc)); + debug("DDR:bar=0x%08x\n", ecm->bar); + debug("DDR:ar=0x%08x\n", ecm->ar); + } else { + return 0; + } + + /* do we still have anything to map */ + sz = sz - law_sz; + if (sz) + return 1; + + return 0; +} diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index 4542ab1..f78099d 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -507,6 +507,15 @@ ulong get_bus_freq(ulong dummy) return gd->csb_clk; } +/******************************************** + * get_ddr_freq + * return ddr bus freq in Hz + *********************************************/ +ulong get_ddr_freq(ulong dummy) +{ + return gd->mem_clk; +} + int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { char buf[32]; diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 7026bca..058d609 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -67,6 +67,7 @@ COBJS-$(CONFIG_P2020) += ddr-gen3.o COBJS-$(CONFIG_PPC_P2040) += ddr-gen3.o COBJS-$(CONFIG_PPC_P2041) += ddr-gen3.o COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o +COBJS-$(CONFIG_PPC_P3060) += ddr-gen3.o COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o @@ -81,6 +82,7 @@ COBJS-$(CONFIG_SYS_DPAA_QBMAN) += portals.o COBJS-$(CONFIG_PPC_P2040) += p2041_ids.o COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o +COBJS-$(CONFIG_PPC_P3060) += p3060_ids.o COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o @@ -114,6 +116,7 @@ COBJS-$(CONFIG_P2020) += p2020_serdes.o COBJS-$(CONFIG_PPC_P2040) += p2041_serdes.o COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o +COBJS-$(CONFIG_PPC_P3060) += p3060_serdes.o COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 7b9f773..a09eb91 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -87,6 +87,22 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) puts("Work-around for Erratum DDR111 enabled\n"); puts("Work-around for Erratum DDR134 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A002769 + puts("Work-around for Erratum IFC-A002769 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549 + puts("Work-around for Erratum P1010-A003549 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399 + puts("Work-around for Erratum IFC A-003399 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120 + if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) + puts("Work-around for Erratum NMG DDR120 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103 + puts("Work-around for Erratum NMG_LBC103 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 22fa461..49c0551 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -64,13 +64,11 @@ int checkcpu (void) u32 ddr_ratio = 0; #endif /* CONFIG_FSL_CORENET */ #endif /* CONFIG_DDR_CLK_FREQ */ - int i; + unsigned int i, core, nr_cores = cpu_numcores(); + u32 mask = cpu_mask(); svr = get_svr(); major = SVR_MAJ(svr); -#ifdef CONFIG_MPC8536 - major &= 0x7; /* the msb of this nibble is a mfg code */ -#endif minor = SVR_MIN(svr); if (cpu_numcores() > 1) { @@ -119,11 +117,11 @@ int checkcpu (void) get_sys_info(&sysinfo); puts("Clock Configuration:"); - for (i = 0; i < cpu_numcores(); i++) { + for_each_cpu(i, core, nr_cores, mask) { if (!(i & 3)) printf ("\n "); - printf("CPU%d:%-4s MHz, ", - i,strmhz(buf1, sysinfo.freqProcessor[i])); + printf("CPU%d:%-4s MHz, ", core, + strmhz(buf1, sysinfo.freqProcessor[core])); } printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus)); diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 6aca166..0a4ce53 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -31,6 +31,7 @@ #include <asm/processor.h> #include <ioports.h> #include <sata.h> +#include <fm_eth.h> #include <asm/io.h> #include <asm/cache.h> #include <asm/mmu.h> @@ -225,7 +226,9 @@ void cpu_init_f (void) #ifdef CONFIG_SYS_DCSRBAR_PHYS ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #endif - +#if defined(CONFIG_SECURE_BOOT) + struct law_entry law; +#endif #ifdef CONFIG_MPC8548 ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); uint svr = get_svr(); @@ -243,6 +246,13 @@ void cpu_init_f (void) disable_tlb(14); disable_tlb(15); +#if defined(CONFIG_SECURE_BOOT) + /* Disable the LAW created for NOR flash by the PBI commands */ + law = find_law(CONFIG_SYS_PBI_FLASH_BASE); + if (law.index != -1) + disable_law(law.index); +#endif + #ifdef CONFIG_CPM2 config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR); #endif @@ -453,6 +463,9 @@ skip_l2: clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR); __raw_readl(&lbc->lcrr); isync(); +#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103 + udelay(100); +#endif #endif #ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE @@ -472,6 +485,10 @@ skip_l2: } #endif +#ifdef CONFIG_FMAN_ENET + fman_enet_init(); +#endif + return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index 32aa94b..4ef3c9a 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc + * Copyright 2009-2011 Freescale Semiconductor, Inc * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -21,59 +21,59 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/fsl_law.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) -#ifdef CONFIG_FSL_CORENET -static void setup_ccsrbar(void) +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT) +void setup_ifc(void) { - u32 temp; - volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000); - volatile ccsr_local_t *ccm; + struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR; + u32 _mas0, _mas1, _mas2, _mas3, _mas7; + phys_addr_t flash_phys = CONFIG_SYS_FLASH_BASE_PHYS; /* - * We can't call set_law() because we haven't moved - * CCSR yet. + * Adjust the TLB we were running out of to match the phys addr of the + * chip select we are adjusting and will return to. */ - ccm = (void *)ccsr_virt; - - out_be32(&ccm->law[0].lawbarh, - (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32); - out_be32(&ccm->law[0].lawbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS); - out_be32(&ccm->law[0].lawar, - LAW_EN | (0x1e << 20) | LAW_SIZE_4K); - - in_be32((u32 *)(ccsr_virt + 0)); - in_be32((u32 *)(ccsr_virt + 1)); - isync(); - - ccm = (void *)CONFIG_SYS_CCSRBAR; - /* Now use the temporary LAW to move CCSR */ - out_be32(&ccm->ccsrbarh, (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32); - out_be32(&ccm->ccsrbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS); - out_be32(&ccm->ccsrar, CCSRAR_C); - temp = in_be32(&ccm->ccsrar); - disable_law(0); -} -#else -static void setup_ccsrbar(void) -{ - u32 temp; - volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000); + flash_phys += (~CONFIG_SYS_AMASK0) + 1 - 4*1024*1024; + + _mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(15); + _mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_IPROT | + MAS1_TSIZE(BOOKE_PAGESZ_4M); + _mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, MAS2_I|MAS2_G); + _mas3 = FSL_BOOKE_MAS3(flash_phys, 0, MAS3_SW|MAS3_SR|MAS3_SX); + _mas7 = FSL_BOOKE_MAS7(flash_phys); + + mtspr(MAS0, _mas0); + mtspr(MAS1, _mas1); + mtspr(MAS2, _mas2); + mtspr(MAS3, _mas3); + mtspr(MAS7, _mas7); - temp = in_be32(ccsr_virt); - out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12); - temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR); + asm volatile("isync;msync;tlbwe;isync"); + + out_be32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0); + out_be32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0); + out_be32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0); + + return ; } #endif -#endif /* We run cpu_init_early_f in AS = 1 */ void cpu_init_early_f(void) { u32 mas0, mas1, mas2, mas3, mas7; int i; +#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549 + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT) + ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; + u32 *l2srbar, *dst, *src; + void (*setup_ifc_sram)(void); +#endif /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); @@ -85,28 +85,77 @@ void cpu_init_early_f(void) for (i = 0; i < sizeof(gd_t); i++) ((char *)gd)[i] = 0; - mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(0); - mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_4K); + mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(13); + mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_1M); mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G); mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS, 0, MAS3_SW|MAS3_SR); mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_PHYS); write_tlb(mas0, mas1, mas2, mas3, mas7); - /* set up CCSR if we want it moved */ -#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) - mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(1); - /* mas1 is the same as above */ - mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G); - mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, MAS3_SW|MAS3_SR); - mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_DEFAULT); +/* + * Work Around for IFC Erratum A-003549. This issue is P1010 + * specific. LCLK(a free running clk signal) is muxed with IFC_CS3 on P1010 SOC + * Hence specifically selecting CS3. + */ +#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549 + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_LCLK_IFC_CS3); +#endif + + init_laws(); + +/* + * Work Around for IFC Erratum A003399, issue will hit only when execution + * from NOR Flash + */ +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT) +#define SRAM_BASE_ADDR (0x00000000) + /* TLB for SRAM */ + mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(9); + mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | + MAS1_TSIZE(BOOKE_PAGESZ_1M); + mas2 = FSL_BOOKE_MAS2(SRAM_BASE_ADDR, MAS2_I); + mas3 = FSL_BOOKE_MAS3(SRAM_BASE_ADDR, 0, MAS3_SX|MAS3_SW|MAS3_SR); + mas7 = FSL_BOOKE_MAS7(0); write_tlb(mas0, mas1, mas2, mas3, mas7); - setup_ccsrbar(); + out_be32(&l2cache->l2srbar0, SRAM_BASE_ADDR); + + out_be32(&l2cache->l2errdis, + (MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC)); + + out_be32(&l2cache->l2ctl, + (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE)); + + /* + * Copy the code in setup_ifc to L2SRAM. Do a word copy + * because NOR Flash on P1010 does not support byte + * access (Erratum IFC-A002769) + */ + setup_ifc_sram = (void *)SRAM_BASE_ADDR; + dst = (u32 *) SRAM_BASE_ADDR; + src = (u32 *) setup_ifc; + for (i = 0; i < 1024; i++) + *l2srbar++ = *src++; + + setup_ifc_sram(); + + /* CLEANUP */ + clrbits_be32(&l2cache->l2ctl, + (MPC85xx_L2CTL_L2E | + MPC85xx_L2CTL_L2SRAM_ENTIRE)); + out_be32(&l2cache->l2srbar0, 0x0); +#endif + + invalidate_tlb(1); + +#if defined(CONFIG_SECURE_BOOT) + /* Disable the TLBs created by ISBC */ + for (i = CONFIG_SYS_ISBC_START_TLB; + i < CONFIG_SYS_ISBC_START_TLB + CONFIG_SYS_ISBC_NUM_TLBS; i++) + disable_tlb(i); #endif - init_laws(); - invalidate_tlb(0); init_tlbs(); } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c index 796d398..f33db02 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c @@ -21,10 +21,12 @@ */ #include <common.h> +#include <asm/fsl_ifc.h> #include <asm/io.h> void cpu_init_f(void) { +#ifdef CONFIG_FSL_LBC fsl_lbc_t *lbc = LBC_BASE_ADDR; /* @@ -39,6 +41,16 @@ void cpu_init_f(void) #else #error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM must be defined #endif +#endif +#ifdef CONFIG_FSL_IFC +#ifndef CONFIG_SYS_FSL_ERRATUM_IFC_A003399 +#if defined(CONFIG_SYS_CSPR0) && defined(CONFIG_SYS_CSOR0) + set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0); + set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0); + set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0); +#endif +#endif +#endif #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c index 655f99c..49000a1 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -8,6 +8,7 @@ #include <common.h> #include <asm/io.h> +#include <asm/processor.h> #include <asm/fsl_ddr_sdram.h> #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) @@ -18,13 +19,36 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num) { unsigned int i; - volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR; +#ifdef CONFIG_MPC83xx + ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC83xx_DDR_ADDR; +#else + ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR; +#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120 + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + uint svr; +#endif +#endif if (ctrl_num) { printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); return; } +#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120 + /* + * Set the DDR IO receiver to an acceptable bias point. + * Fixed in Rev 2.1. + */ + svr = get_svr(); + if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) { + if ((regs->ddr_sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) == + SDRAM_CFG_SDRAM_TYPE_DDR2) + out_be32(&gur->ddrioovcr, 0x90000000); + else + out_be32(&gur->ddrioovcr, 0xA8000000); + } +#endif + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { if (i == 0) { out_be32(&ddr->cs0_bnds, regs->cs[i].bnds); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 8f13cd8..d20c94c 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -361,6 +361,7 @@ void fdt_add_enet_stashing(void *fdt) } #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME) +#ifdef CONFIG_SYS_DPAA_FMAN static void ft_fixup_clks(void *blob, const char *compat, u32 offset, unsigned long freq) { @@ -374,12 +375,14 @@ static void ft_fixup_clks(void *blob, const char *compat, u32 offset, "for %s: %s\n", compat, fdt_strerror(off)); } } +#endif static void ft_fixup_dpaa_clks(void *blob) { sys_info_t sysinfo; get_sys_info(&sysinfo); +#ifdef CONFIG_SYS_DPAA_FMAN ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET, sysinfo.freqFMan[0]); @@ -387,6 +390,7 @@ static void ft_fixup_dpaa_clks(void *blob) ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET, sysinfo.freqFMan[1]); #endif +#endif #ifdef CONFIG_SYS_DPAA_PME do_fixup_by_compat_u32(blob, "fsl,pme", diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 4307a4c..07e58ed 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -482,6 +482,13 @@ static void wait_for_rstdone(unsigned int bank) printf("SERDES: timeout resetting bank %u\n", bank + 1); } + +void __soc_serdes_init(void) +{ + /* Allow for SoC-specific initialization in <SOC>_serdes.c */ +}; +void soc_serdes_init(void) __attribute__((weak, alias("__soc_serdes_init"))); + void fsl_serdes_init(void) { ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -570,6 +577,8 @@ void fsl_serdes_init(void) } } + soc_serdes_init(); + #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 /* * Bank two uses the clock from bank three, so if bank two is enabled, diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c index bd19094..e0ea502 100644 --- a/arch/powerpc/cpu/mpc85xx/liodn.c +++ b/arch/powerpc/cpu/mpc85xx/liodn.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -120,6 +120,19 @@ static void setup_pme_liodn_base(void) #endif } +#ifdef CONFIG_SYS_FSL_RAID_ENGINE +static void setup_raide_liodn_base(void) +{ + struct ccsr_raide *raide = (void *)CONFIG_SYS_FSL_RAID_ENGINE_ADDR; + + /* setup raid engine liodn base for data/desc ; both set to 47 */ + u32 base = (liodn_bases[FSL_HW_PORTAL_RAID_ENGINE].id[0] << 16) | + liodn_bases[FSL_HW_PORTAL_RAID_ENGINE].id[0]; + + out_be32(&raide->liodnbr, base); +} +#endif + void set_liodns(void) { /* setup general liodn offsets */ @@ -145,6 +158,12 @@ void set_liodns(void) #endif /* setup PME liodn base */ setup_pme_liodn_base(); + +#ifdef CONFIG_SYS_FSL_RAID_ENGINE + /* raid engine ccr addr code for liodn */ + set_liodn(raide_liodn_tbl, raide_liodn_tbl_sz); + setup_raide_liodn_base(); +#endif } static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz) @@ -184,4 +203,8 @@ void fdt_fixup_liodn(void *blob) #endif #endif fdt_fixup_liodn_tbl(blob, sec_liodn_tbl, sec_liodn_tbl_sz); + +#ifdef CONFIG_SYS_FSL_RAID_ENGINE + fdt_fixup_liodn_tbl(blob, raide_liodn_tbl, raide_liodn_tbl_sz); +#endif } diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index 758e6d7..ffc2a9a 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -221,14 +221,14 @@ ulong get_spin_virt_addr(void) #ifdef CONFIG_FSL_CORENET static void plat_mp_up(unsigned long bootpg) { - u32 up, cpu_up_mask, whoami; + u32 cpu_up_mask, whoami; u32 *table = (u32 *)get_spin_virt_addr(); volatile ccsr_gur_t *gur; volatile ccsr_local_t *ccm; volatile ccsr_rcpm_t *rcpm; volatile ccsr_pic_t *pic; int timeout = 10; - u32 nr_cpus; + u32 mask = cpu_mask(); struct law_entry e; gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -236,8 +236,6 @@ static void plat_mp_up(unsigned long bootpg) rcpm = (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR); pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR); - nr_cpus = ((in_be32(&pic->frr) >> 8) & 0xff) + 1; - whoami = in_be32(&pic->whoami); cpu_up_mask = 1 << whoami; out_be32(&ccm->bstrl, bootpg); @@ -251,19 +249,18 @@ static void plat_mp_up(unsigned long bootpg) /* disable time base at the platform */ out_be32(&rcpm->ctbenrl, cpu_up_mask); - /* release the hounds */ - up = ((1 << nr_cpus) - 1); - out_be32(&gur->brrl, up); + out_be32(&gur->brrl, mask); /* wait for everyone */ while (timeout) { - int i; - for (i = 0; i < nr_cpus; i++) { - if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER]) - cpu_up_mask |= (1 << i); - }; + unsigned int i, cpu, nr_cpus = cpu_numcores(); - if ((cpu_up_mask & up) == up) + for_each_cpu(i, cpu, nr_cpus, mask) { + if (table[cpu * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER]) + cpu_up_mask |= (1 << cpu); + } + + if ((cpu_up_mask & mask) == mask) break; udelay(100); @@ -272,7 +269,7 @@ static void plat_mp_up(unsigned long bootpg) if (timeout == 0) printf("CPU up timeout. CPU up mask is %x should be %x\n", - cpu_up_mask, up); + cpu_up_mask, mask); /* enable time base at the platform */ out_be32(&rcpm->ctbenrl, 0); @@ -283,7 +280,7 @@ static void plat_mp_up(unsigned long bootpg) mtspr(SPRN_TBWU, 0); mtspr(SPRN_TBWL, 0); - out_be32(&rcpm->ctbenrl, (1 << nr_cpus) - 1); + out_be32(&rcpm->ctbenrl, mask); #ifdef CONFIG_MPC8xxx_DISABLE_BPTR /* diff --git a/arch/powerpc/cpu/mpc85xx/p3060_ids.c b/arch/powerpc/cpu/mpc85xx/p3060_ids.c new file mode 100644 index 0000000..07703d4 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p3060_ids.c @@ -0,0 +1,113 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO( 1, 2, 1, 0), + SET_QP_INFO( 3, 4, 2, 1), + SET_QP_INFO( 5, 6, 3, 2), + SET_QP_INFO( 7, 8, 4, 3), + SET_QP_INFO( 9, 10, 5, 4), + SET_QP_INFO(11, 12, 6, 5), + SET_QP_INFO(13, 14, 7, 6), + SET_QP_INFO(15, 16, 8, 7), + SET_QP_INFO(17, 18, 9, 0), /* for now sdest to 0 */ + SET_QP_INFO(19, 20, 10, 0), /* for now sdest to 0 */ +}; +#endif + +struct liodn_id_table liodn_tbl[] = { + SET_USB_LIODN(1, "fsl-usb2-mph", 127), + SET_USB_LIODN(2, "fsl-usb2-dr", 157), + + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194), + + SET_DMA_LIODN(1, 196), + SET_DMA_LIODN(2, 197), + + SET_GUTS_LIODN("fsl,rapidio-delta", 198, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 199, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rmuliodnr, 0), + +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(31), + SET_BMAN_LIODN(32), +#endif + SET_PME_LIODN(128), +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 11), + SET_FMAN_RX_1G_LIODN(1, 1, 12), + SET_FMAN_RX_1G_LIODN(1, 2, 13), + SET_FMAN_RX_1G_LIODN(1, 3, 14), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); + +#if (CONFIG_SYS_NUM_FMAN == 2) +struct liodn_id_table fman2_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(2, 0, 16), + SET_FMAN_RX_1G_LIODN(2, 1, 17), + SET_FMAN_RX_1G_LIODN(2, 2, 18), + SET_FMAN_RX_1G_LIODN(2, 3, 19), +}; +int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl); +#endif +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 146, 154), + SET_SEC_JR_LIODN_ENTRY(1, 147, 155), + SET_SEC_JR_LIODN_ENTRY(2, 178, 186), + SET_SEC_JR_LIODN_ENTRY(3, 179, 187), + SET_SEC_RTIC_LIODN_ENTRY(a, 144), + SET_SEC_RTIC_LIODN_ENTRY(b, 145), + SET_SEC_RTIC_LIODN_ENTRY(c, 176), + SET_SEC_RTIC_LIODN_ENTRY(d, 177), + SET_SEC_DECO_LIODN_ENTRY(0, 129, 161), + SET_SEC_DECO_LIODN_ENTRY(1, 130, 162), + SET_SEC_DECO_LIODN_ENTRY(2, 131, 163), + SET_SEC_DECO_LIODN_ENTRY(3, 132, 164), + SET_SEC_DECO_LIODN_ENTRY(4, 133, 165), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +struct liodn_id_table liodn_bases[] = { + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(96, 106), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32), +#if (CONFIG_SYS_NUM_FMAN == 2) + [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(64), +#endif +#endif +#ifdef CONFIG_SYS_DPAA_PME + [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(116, 133), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/p3060_serdes.c b/arch/powerpc/cpu/mpc85xx/p3060_serdes.c new file mode 100644 index 0000000..6387276 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p3060_serdes.c @@ -0,0 +1,138 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet_serdes.h" + +static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { + [0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC1, + SGMII_FM1_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2, + NONE, NONE, AURORA, AURORA}, + [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, SGMII_FM2_DTSEC3, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4, + SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM1_DTSEC2, NONE, NONE, AURORA, AURORA}, + [0x16] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2, SGMII_FM2_DTSEC3, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4}, + [0x19] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, PCIE2, PCIE2, PCIE2, PCIE2, SGMII_FM2_DTSEC3, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4}, + [0x1c] = {NONE, NONE, SRIO1, SRIO2, NONE, NONE, NONE, NONE, + AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2, SGMII_FM2_DTSEC3, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4}, +}; + +enum srds_prtcl serdes_get_prtcl(int cfg, int lane) +{ + if (!serdes_lane_enabled(lane)) + return NONE; + + return serdes_cfg_tbl[cfg][lane]; +} + +int is_serdes_prtcl_valid(u32 prtcl) +{ + int i; + + if (prtcl > ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_cfg_tbl[prtcl][i] != NONE) + return 1; + } + + return 0; +} + +void soc_serdes_init(void) +{ + /* + * On the P3060 the devdisr2 register does not correctly reflect + * the state of the MACs based on the RCW fields. So disable the MACs + * based on the srds_prtcl and ec1, ec2, ec3 fields + */ + + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 devdisr2 = in_be32(&gur->devdisr2); + u32 rcwsr11 = in_be32(&gur->rcwsr[11]); + u32 rcwsr13 = in_be32(&gur->rcwsr[13]); + u32 ec1_ext, ec2_ext; + + /* NOTE: Leave FM1-1,FM1-2 alone for MDIO access */ + + if (!is_serdes_configured(SGMII_FM1_DTSEC3)) + devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC1_3; + + if (!is_serdes_configured(SGMII_FM1_DTSEC4)) + devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC1_4; + + if (!is_serdes_configured(SGMII_FM2_DTSEC1)) + devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_1; + + if (!is_serdes_configured(SGMII_FM2_DTSEC2)) + devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_2; + + if (!is_serdes_configured(SGMII_FM2_DTSEC3)) + devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_3; + + if (!is_serdes_configured(SGMII_FM2_DTSEC4)) + devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_4; + + if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) == + FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) { + devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC1_2; + } + + if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) == + FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1) { + devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC2_1; + } + + ec1_ext = rcwsr13 & FSL_CORENET_RCWSR13_EC1_EXT; + if (ec1_ext) { + if ((ec1_ext == FSL_CORENET_RCWSR13_EC1_EXT_FM1_DTSEC4_RGMII) || + (ec1_ext == FSL_CORENET_RCWSR13_EC1_EXT_FM1_DTSEC4_MII)) + devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC1_4; + } + + ec2_ext = rcwsr13 & FSL_CORENET_RCWSR13_EC2_EXT; + if (ec2_ext) { + if ((ec2_ext == FSL_CORENET_RCWSR13_EC2_EXT_FM2_DTSEC4_RGMII) || + (ec2_ext == FSL_CORENET_RCWSR13_EC2_EXT_FM2_DTSEC4_MII)) + devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC2_4; + } + + if ((rcwsr13 & FSL_CORENET_RCWSR13_EC3) == + FSL_CORENET_RCWSR13_EC3_FM2_DTSEC4_MII) + devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC2_4; + + out_be32(&gur->devdisr2, devdisr2); +} diff --git a/arch/powerpc/cpu/mpc85xx/p5020_ids.c b/arch/powerpc/cpu/mpc85xx/p5020_ids.c index 9836588..2911c13 100644 --- a/arch/powerpc/cpu/mpc85xx/p5020_ids.c +++ b/arch/powerpc/cpu/mpc85xx/p5020_ids.c @@ -97,6 +97,16 @@ struct liodn_id_table sec_liodn_tbl[] = { }; int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); +#ifdef CONFIG_SYS_FSL_RAID_ENGINE +struct liodn_id_table raide_liodn_tbl[] = { + SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63), +}; +int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl); +#endif + struct liodn_id_table liodn_bases[] = { [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 100), #ifdef CONFIG_SYS_DPAA_FMAN @@ -105,4 +115,7 @@ struct liodn_id_table liodn_bases[] = { #ifdef CONFIG_SYS_DPAA_PME [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(136, 172), #endif +#ifdef CONFIG_SYS_FSL_RAID_ENGINE + [FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(47), +#endif }; diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c index ecaa30d..418dd9d 100644 --- a/arch/powerpc/cpu/mpc85xx/portals.c +++ b/arch/powerpc/cpu/mpc85xx/portals.c @@ -151,7 +151,7 @@ static int fdt_qportal(void *blob, int off, int id, char *name, dev_handle = fdt_get_phandle(blob, dev_off); if (dev_handle <= 0) { dev_handle = fdt_alloc_phandle(blob); - ret = fdt_create_phandle(blob, dev_off, + ret = fdt_set_phandle(blob, dev_off, dev_handle); if (ret < 0) return ret; @@ -198,7 +198,10 @@ void fdt_fixup_qportals(void *blob) u32 liodns[2]; #endif const int *ci = fdt_getprop(blob, off, "cell-index", NULL); - int j, i = *ci; + int i = *ci; +#ifdef CONFIG_SYS_DPAA_FMAN + int j; +#endif err = fdt_setprop(blob, off, "compatible", compat, compat_len); if (err < 0) diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index a83dfeb..ce47532 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -41,6 +41,7 @@ void get_sys_info (sys_info_t * sysInfo) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #ifdef CONFIG_FSL_CORENET volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR); + unsigned int cpu; const u8 core_cplx_PLL[16] = { [ 0] = 0, /* CC1 PPL / 1 */ @@ -97,11 +98,11 @@ void get_sys_info (sys_info_t * sysInfo) freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i]; } rcw_tmp = in_be32(&gur->rcwsr[3]); - for (i = 0; i < cpu_numcores(); i++) { - u32 c_pll_sel = (in_be32(&clk->clkc0csr + i*8) >> 27) & 0xf; + for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { + u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; - sysInfo->freqProcessor[i] = + sysInfo->freqProcessor[cpu] = freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; } diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 878a3d6..5e0d78d 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -83,6 +83,45 @@ _start_e500: +#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500MC) + /* ISBC uses L2 as stack. + * Disable L2 cache here so that u-boot can enable it later + * as part of it's normal flow + */ + + /* Check if L2 is enabled */ + mfspr r3, SPRN_L2CSR0 + lis r2, L2CSR0_L2E@h + ori r2, r2, L2CSR0_L2E@l + and. r4, r3, r2 + beq l2_disabled + + mfspr r3, SPRN_L2CSR0 + /* Flush L2 cache */ + lis r2,(L2CSR0_L2FL)@h + ori r2, r2, (L2CSR0_L2FL)@l + or r3, r2, r3 + sync + isync + mtspr SPRN_L2CSR0,r3 + isync +1: + mfspr r3, SPRN_L2CSR0 + and. r1, r3, r2 + bne 1b + + mfspr r3, SPRN_L2CSR0 + lis r2, L2CSR0_L2E@h + ori r2, r2, L2CSR0_L2E@l + andc r4, r3, r2 + sync + isync + mtspr SPRN_L2CSR0,r4 + isync + +l2_disabled: +#endif + /* clear registers/arrays not reset by hardware */ /* L1 */ @@ -279,10 +318,244 @@ _start_e500: #endif /* CONFIG_MPC8569 */ +/* + * Relocate CCSR, if necessary. We relocate CCSR if (obviously) the default + * location is not where we want it. This typically happens on a 36-bit + * system, where we want to move CCSR to near the top of 36-bit address space. + * + * To move CCSR, we create two temporary TLBs, one for the old location, and + * another for the new location. On CoreNet systems, we also need to create + * a special, temporary LAW. + * + * As a general rule, TLB0 is used for short-term TLBs, and TLB1 is used for + * long-term TLBs, so we use TLB0 here. + */ +#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) + +#if !defined(CONFIG_SYS_CCSRBAR_PHYS_HIGH) || !defined(CONFIG_SYS_CCSRBAR_PHYS_LOW) +#error "CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW) must be defined." +#endif + +purge_old_ccsr_tlb: + lis r8, CONFIG_SYS_CCSRBAR@h + ori r8, r8, CONFIG_SYS_CCSRBAR@l + lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h + ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l + + /* + * In a multi-stage boot (e.g. NAND boot), a previous stage may have + * created a TLB for CCSR, which will interfere with our relocation + * code. Since we're going to create a new TLB for CCSR anyway, + * it should be safe to delete this old TLB here. We have to search + * for it, though. + */ + + li r1, 0 + mtspr MAS6, r1 /* Search the current address space and PID */ + tlbsx 0, r8 + mfspr r1, MAS1 + andis. r2, r1, MAS1_VALID@h /* Check for the Valid bit */ + beq 1f /* Skip if no TLB found */ + + rlwinm r1, r1, 0, 1, 31 /* Clear Valid bit */ + mtspr MAS1, r1 + tlbwe +1: + +create_ccsr_new_tlb: + /* + * Create a TLB for the new location of CCSR. Register R8 is reserved + * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR). + */ + lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h + ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l + lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h + ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l + lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h + ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l + lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h + ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l + lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h + ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l + mtspr MAS0, r0 + mtspr MAS1, r1 + mtspr MAS2, r2 + mtspr MAS3, r3 + mtspr MAS7, r7 + isync + msync + tlbwe + + /* + * Create a TLB for the old location of CCSR. Register R9 is reserved + * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000). + */ +create_ccsr_old_tlb: + lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h + ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l + lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h + ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l + lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h + ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l + li r7, 0 /* The default CCSR address is always a 32-bit number */ + mtspr MAS0, r0 + /* MAS1 is the same as above */ + mtspr MAS2, r2 + mtspr MAS3, r3 + mtspr MAS7, r7 + isync + msync + tlbwe + +#ifdef CONFIG_FSL_CORENET + +#define CCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) +#define LAW_EN 0x80000000 +#define LAW_SIZE_4K 0xb +#define CCSRBAR_LAWAR (LAW_EN | (0x1e << 20) | LAW_SIZE_4K) +#define CCSRAR_C 0x80000000 /* Commit */ + +create_temp_law: + /* + * On CoreNet systems, we create the temporary LAW using a special LAW + * target ID of 0x1e. LAWBARH is at offset 0xc00 in CCSR. + */ + lis r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h + ori r0, r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l + lis r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@h + ori r1, r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@l + lis r2, CCSRBAR_LAWAR@h + ori r2, r2, CCSRBAR_LAWAR@l + + stw r0, 0xc00(r9) /* LAWBARH0 */ + stw r1, 0xc04(r9) /* LAWBARL0 */ + sync + stw r2, 0xc08(r9) /* LAWAR0 */ + + /* + * Read back from LAWAR to ensure the update is complete. e500mc + * cores also require an isync. + */ + lwz r0, 0xc08(r9) /* LAWAR0 */ + isync + + /* + * Read the current CCSRBARH and CCSRBARL using load word instructions. + * Follow this with an isync instruction. This forces any outstanding + * accesses to configuration space to completion. + */ +read_old_ccsrbar: + lwz r0, 0(r9) /* CCSRBARH */ + lwz r0, 4(r9) /* CCSRBARH */ + isync + + /* + * Write the new values for CCSRBARH and CCSRBARL to their old + * locations. The CCSRBARH has a shadow register. When the CCSRBARH + * has a new value written it loads a CCSRBARH shadow register. When + * the CCSRBARL is written, the CCSRBARH shadow register contents + * along with the CCSRBARL value are loaded into the CCSRBARH and + * CCSRBARL registers, respectively. Follow this with a sync + * instruction. + */ +write_new_ccsrbar: + lis r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h + ori r0, r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l + lis r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@h + ori r1, r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@l + lis r2, CCSRAR_C@h + ori r2, r2, CCSRAR_C@l + + stw r0, 0(r9) /* Write to CCSRBARH */ + sync /* Make sure we write to CCSRBARH first */ + stw r1, 4(r9) /* Write to CCSRBARL */ + sync + + /* + * Write a 1 to the commit bit (C) of CCSRAR at the old location. + * Follow this with a sync instruction. + */ + stw r2, 8(r9) + sync + + /* Delete the temporary LAW */ +delete_temp_law: + li r1, 0 + stw r1, 0xc08(r8) + sync + stw r1, 0xc00(r8) + stw r1, 0xc04(r8) + sync + +#else /* #ifdef CONFIG_FSL_CORENET */ + +write_new_ccsrbar: + /* + * Read the current value of CCSRBAR using a load word instruction + * followed by an isync. This forces all accesses to configuration + * space to complete. + */ + sync + lwz r0, 0(r9) + isync + +/* CONFIG_SYS_CCSRBAR_PHYS right shifted by 12 */ +#define CCSRBAR_PHYS_RS12 ((CONFIG_SYS_CCSRBAR_PHYS_HIGH << 20) | \ + (CONFIG_SYS_CCSRBAR_PHYS_LOW >> 12)) + + /* Write the new value to CCSRBAR. */ + lis r0, CCSRBAR_PHYS_RS12@h + ori r0, r0, CCSRBAR_PHYS_RS12@l + stw r0, 0(r9) + sync + + /* + * The manual says to perform a load of an address that does not + * access configuration space or the on-chip SRAM using an existing TLB, + * but that doesn't appear to be necessary. We will do the isync, + * though. + */ + isync + + /* + * Read the contents of CCSRBAR from its new location, followed by + * another isync. + */ + lwz r0, 0(r8) + isync + +#endif /* #ifdef CONFIG_FSL_CORENET */ + + /* Delete the temporary TLBs */ +delete_temp_tlbs: + lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h + ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l + li r1, 0 + lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h + ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l + mtspr MAS0, r0 + mtspr MAS1, r1 + mtspr MAS2, r2 + isync + msync + tlbwe + + lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h + ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l + lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h + ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l + mtspr MAS0, r0 + mtspr MAS2, r2 + isync + msync + tlbwe +#endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */ + +create_init_ram_area: lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l -#ifndef CONFIG_SYS_RAMBOOT +#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) /* create a temp mapping in AS=1 to the 4M boot window */ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l @@ -293,6 +566,20 @@ _start_e500: /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l +#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) + /* create a temp mapping in AS = 1 for Flash mapping + * created by PBL for ISBC code + */ + lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h + ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l + + lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h + ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l + + lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, + (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, + (MAS3_SX|MAS3_SW|MAS3_SR))@l #else /* * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds index 8410bd7..852f9aa 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds @@ -23,6 +23,8 @@ * MA 02111-1307 USA */ +#include "config.h" /* CONFIG_BOARDDIR */ + OUTPUT_ARCH(powerpc) SECTIONS { @@ -52,8 +54,18 @@ SECTIONS . = ALIGN(8); __init_begin = .; __init_end = .; - - .resetvec ADDR(.text) + 0xffc : { +#if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */ + .bootpg ADDR(.text) + 0x1000 : + { + start.o (.bootpg) + } +#define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */ +#elif defined(CONFIG_FSL_ELBC) +#define RESET_VECTOR_OFFSET 0xffc /* LBC has 4k sram */ +#else +#error unknown NAND controller +#endif + .resetvec ADDR(.text) + RESET_VECTOR_OFFSET : { KEEP(*(.resetvec)) } = 0xffff @@ -64,4 +76,4 @@ SECTIONS } __bss_end__ = .; } -ASSERT(__init_end <= 0xfff00ffc, "NAND bootstrap too big"); +ASSERT(__init_end <= (0xfff00000 + RESET_VECTOR_OFFSET), "NAND bootstrap too big"); diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 767bc52..0365ca8 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -27,6 +27,7 @@ #include <common.h> #include <command.h> #include <tsec.h> +#include <fm_eth.h> #include <netdev.h> #include <asm/cache.h> #include <asm/io.h> @@ -102,6 +103,8 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(P2041, P2041_E, 4), CPU_TYPE_ENTRY(P3041, P3041, 4), CPU_TYPE_ENTRY(P3041, P3041_E, 4), + CPU_TYPE_ENTRY_MASK(P3060, P3060, 6, 0xf3), + CPU_TYPE_ENTRY_MASK(P3060, P3060_E, 6, 0xf3), CPU_TYPE_ENTRY(P4040, P4040, 4), CPU_TYPE_ENTRY(P4040, P4040_E, 4), CPU_TYPE_ENTRY(P4080, P4080, 8), @@ -129,13 +132,33 @@ struct cpu_type *identify_cpu(u32 ver) return &cpu_type_unknown; } +#define MPC8xxx_PICFRR_NCPU_MASK 0x00001f00 +#define MPC8xxx_PICFRR_NCPU_SHIFT 8 + +/* + * Return a 32-bit mask indicating which cores are present on this SOC. + */ +u32 cpu_mask() +{ + ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR; + struct cpu_type *cpu = gd->cpu; + + /* better to query feature reporting register than just assume 1 */ + if (cpu == &cpu_type_unknown) + return ((in_be32(&pic->frr) & MPC8xxx_PICFRR_NCPU_MASK) >> + MPC8xxx_PICFRR_NCPU_SHIFT) + 1; + + return cpu->mask; +} + +/* + * Return the number of cores on this SOC. + */ int cpu_numcores() { ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR; struct cpu_type *cpu = gd->cpu; /* better to query feature reporting register than just assume 1 */ -#define MPC8xxx_PICFRR_NCPU_MASK 0x00001f00 -#define MPC8xxx_PICFRR_NCPU_SHIFT 8 if (cpu == &cpu_type_unknown) return ((in_be32(&pic->frr) & MPC8xxx_PICFRR_NCPU_MASK) >> MPC8xxx_PICFRR_NCPU_SHIFT) + 1; @@ -143,6 +166,18 @@ int cpu_numcores() { return cpu->num_cores; } +/* + * Check if the given core ID is valid + * + * Returns zero if it isn't, 1 if it is. + */ +int is_core_valid(unsigned int core) +{ + struct cpu_type *cpu = gd->cpu; + + return !!((1 << core) & cpu->mask); +} + int probecpu (void) { uint svr; @@ -174,5 +209,8 @@ int cpu_eth_init(bd_t *bis) tsec_standard_init(bis); #endif +#ifdef CONFIG_FMAN_ENET + fm_standard_init(bis); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 3824aad..15cd375 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -18,7 +18,9 @@ #include "ddr.h" -#ifdef CONFIG_MPC85xx +#ifdef CONFIG_MPC83xx + #define _DDR_ADDR CONFIG_SYS_MPC83xx_DDR_ADDR +#elif defined(CONFIG_MPC85xx) #define _DDR_ADDR CONFIG_SYS_MPC85xx_DDR_ADDR #elif defined(CONFIG_MPC86xx) #define _DDR_ADDR CONFIG_SYS_MPC86xx_DDR_ADDR @@ -94,6 +96,10 @@ static inline int fsl_ddr_get_rtt(void) * 6 if 2.5ns > tCK >= 1.875ns * 7 if 1.875ns > tCK >= 1.5ns * 8 if 1.5ns > tCK >= 1.25ns + * 9 if 1.25ns > tCK >= 1.07ns + * 10 if 1.07ns > tCK >= 0.935ns + * 11 if 0.935ns > tCK >= 0.833ns + * 12 if 0.833ns > tCK >= 0.75ns */ static inline unsigned int compute_cas_write_latency(void) { @@ -108,8 +114,18 @@ static inline unsigned int compute_cas_write_latency(void) cwl = 7; else if (mclk_ps >= 1250) cwl = 8; - else - cwl = 8; + else if (mclk_ps >= 1070) + cwl = 9; + else if (mclk_ps >= 935) + cwl = 10; + else if (mclk_ps >= 833) + cwl = 11; + else if (mclk_ps >= 750) + cwl = 12; + else { + cwl = 12; + printf("Warning: CWL is out of range\n"); + } return cwl; } @@ -146,7 +162,7 @@ static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr, break; case 2: if ((dimm_number == 0 && dimm_params[0].n_ranks > 2) || \ - (dimm_number > 1 && dimm_params[dimm_number].n_ranks > 0)) + (dimm_number >= 1 && dimm_params[dimm_number].n_ranks > 0)) go_config = 1; break; case 3: @@ -617,7 +633,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int sr_ie = 0; /* Self-refresh interrupt enable */ unsigned int dll_rst_dis; /* DLL reset disable */ unsigned int dqs_cfg; /* DQS configuration */ - unsigned int odt_cfg; /* ODT configuration */ + unsigned int odt_cfg = 0; /* ODT configuration */ unsigned int num_pr; /* Number of posted refreshes */ unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */ unsigned int ap_en; /* Address Parity Enable */ @@ -625,15 +641,16 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int rcw_en = 0; /* Register Control Word Enable */ unsigned int md_en = 0; /* Mirrored DIMM Enable */ unsigned int qd_en = 0; /* quad-rank DIMM Enable */ + int i; dll_rst_dis = 1; /* Make this configurable */ dqs_cfg = popts->DQS_config; - if (popts->cs_local_opts[0].odt_rd_cfg - || popts->cs_local_opts[0].odt_wr_cfg) { - /* FIXME */ - odt_cfg = 2; - } else { - odt_cfg = 0; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (popts->cs_local_opts[i].odt_rd_cfg + || popts->cs_local_opts[i].odt_wr_cfg) { + odt_cfg = SDRAM_CFG2_ODT_ONLY_READ; + break; + } } num_pr = 1; /* Make this configurable */ @@ -1018,7 +1035,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, #if defined(CONFIG_FSL_DDR2) const unsigned int mclk_ps = get_memory_clk_period_ps(); #endif - + dqs_en = !popts->DQS_config; rtt = fsl_ddr_get_rtt(); al = additive_latency; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index 8132e68..20c7db0 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -448,7 +448,8 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, #if defined(CONFIG_FSL_DDR2) if (lowest_good_caslat < 4) { - additive_latency = picos_to_mclk(tRCD_ps) - lowest_good_caslat; + additive_latency = (picos_to_mclk(tRCD_ps) > lowest_good_caslat) + ? picos_to_mclk(tRCD_ps) - lowest_good_caslat : 0; if (mclk_to_picos(additive_latency) > tRCD_ps) { additive_latency = picos_to_mclk(tRCD_ps); debug("setting additive_latency to %u because it was " diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index 249fd7d..5699b0c 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -34,14 +34,17 @@ extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { [0][0] = SPD_EEPROM_ADDRESS, }; -#endif -#if (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) +#elif (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ + [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */ +}; +#elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ [1][0] = SPD_EEPROM_ADDRESS2, /* controller 2 */ }; -#endif -#if (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +#elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2) u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index bd9c466..4dc748b 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -26,14 +26,15 @@ extern void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num); -typedef struct { +struct dynamic_odt { unsigned int odt_rd_cfg; unsigned int odt_wr_cfg; unsigned int odt_rtt_norm; unsigned int odt_rtt_wr; -} dynamic_odt_t; +}; -static const dynamic_odt_t single_Q[4] = { +#ifdef CONFIG_FSL_DDR3 +static const struct dynamic_odt single_Q[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_CS_AND_OTHER_DIMM, @@ -60,7 +61,7 @@ static const dynamic_odt_t single_Q[4] = { } }; -static const dynamic_odt_t single_D[4] = { +static const struct dynamic_odt single_D[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_ALL, @@ -77,7 +78,7 @@ static const dynamic_odt_t single_D[4] = { {0, 0, 0, 0} }; -static const dynamic_odt_t single_S[4] = { +static const struct dynamic_odt single_S[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_ALL, @@ -89,7 +90,7 @@ static const dynamic_odt_t single_S[4] = { {0, 0, 0, 0}, }; -static const dynamic_odt_t dual_DD[4] = { +static const struct dynamic_odt dual_DD[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_SAME_DIMM, @@ -116,7 +117,7 @@ static const dynamic_odt_t dual_DD[4] = { } }; -static const dynamic_odt_t dual_DS[4] = { +static const struct dynamic_odt dual_DS[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_SAME_DIMM, @@ -137,7 +138,7 @@ static const dynamic_odt_t dual_DS[4] = { }, {0, 0, 0, 0} }; -static const dynamic_odt_t dual_SD[4] = { +static const struct dynamic_odt dual_SD[4] = { { /* cs0 */ FSL_DDR_ODT_OTHER_DIMM, FSL_DDR_ODT_ALL, @@ -159,7 +160,7 @@ static const dynamic_odt_t dual_SD[4] = { } }; -static const dynamic_odt_t dual_SS[4] = { +static const struct dynamic_odt dual_SS[4] = { { /* cs0 */ FSL_DDR_ODT_OTHER_DIMM, FSL_DDR_ODT_ALL, @@ -176,7 +177,7 @@ static const dynamic_odt_t dual_SS[4] = { {0, 0, 0, 0} }; -static const dynamic_odt_t dual_D0[4] = { +static const struct dynamic_odt dual_D0[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_SAME_DIMM, @@ -193,7 +194,7 @@ static const dynamic_odt_t dual_D0[4] = { {0, 0, 0, 0} }; -static const dynamic_odt_t dual_0D[4] = { +static const struct dynamic_odt dual_0D[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, { /* cs2 */ @@ -210,7 +211,7 @@ static const dynamic_odt_t dual_0D[4] = { } }; -static const dynamic_odt_t dual_S0[4] = { +static const struct dynamic_odt dual_S0[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_CS, @@ -223,7 +224,7 @@ static const dynamic_odt_t dual_S0[4] = { }; -static const dynamic_odt_t dual_0S[4] = { +static const struct dynamic_odt dual_0S[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, { /* cs2 */ @@ -236,7 +237,7 @@ static const dynamic_odt_t dual_0S[4] = { }; -static const dynamic_odt_t odt_unknown[4] = { +static const struct dynamic_odt odt_unknown[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_CS, @@ -262,7 +263,218 @@ static const dynamic_odt_t odt_unknown[4] = { DDR3_RTT_OFF } }; +#else /* CONFIG_FSL_DDR3 */ +static const struct dynamic_odt single_Q[4] = { + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt single_D[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0} +}; +static const struct dynamic_odt single_S[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0}, +}; + +static const struct dynamic_odt dual_DD[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + } +}; + +static const struct dynamic_odt dual_DS[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt dual_SD[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + } +}; + +static const struct dynamic_odt dual_SS[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt dual_D0[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt dual_0D[4] = { + {0, 0, 0, 0}, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + } +}; + +static const struct dynamic_odt dual_S0[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0} + +}; + +static const struct dynamic_odt dual_0S[4] = { + {0, 0, 0, 0}, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0} + +}; + +static const struct dynamic_odt odt_unknown[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + } +}; +#endif unsigned int populate_memctl_options(int all_DIMMs_registered, memctl_options_t *popts, dimm_params_t *pdimm, @@ -271,7 +483,8 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, unsigned int i; char buffer[HWCONFIG_BUFFER_SIZE]; char *buf = NULL; - const dynamic_odt_t *pdodt = odt_unknown; + const struct dynamic_odt *pdodt = odt_unknown; + ulong ddr_freq; /* * Extract hwconfig from environment since we have not properly setup @@ -336,7 +549,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, /* Pick chip-select local options. */ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2) popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg; popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg; popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm; @@ -716,6 +929,20 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, if (pdimm[0].n_ranks == 4) popts->quad_rank_present = 1; + ddr_freq = get_ddr_freq(0) / 1000000; + if (popts->registered_dimm_en) { + popts->rcw_override = 1; + popts->rcw_1 = 0x000a5a00; + if (ddr_freq <= 800) + popts->rcw_2 = 0x00000000; + else if (ddr_freq <= 1066) + popts->rcw_2 = 0x00100000; + else if (ddr_freq <= 1333) + popts->rcw_2 = 0x00200000; + else + popts->rcw_2 = 0x00300000; + } + fsl_ddr_board_options(popts, pdimm, ctrl_num); return 0; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c index 104d360..eb6a17a 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c @@ -20,7 +20,8 @@ #define ULL_8FS 0xFFFFFFFFULL /* - * Round mclk_ps to nearest 10 ps in memory controller code. + * Round up mclk_ps to nearest 1 ps in memory controller code + * if the error is 0.5ps or more. * * If an imprecise data rate is too high due to rounding error * propagation, compute a suitably rounded mclk_ps to compute @@ -32,42 +33,37 @@ unsigned int get_memory_clk_period_ps(void) unsigned int result; /* Round to nearest 10ps, being careful about 64-bit multiply/divide */ - unsigned long long mclk_ps = ULL_2E12; - - /* Add 5*data_rate, for rounding */ - mclk_ps += 5*(unsigned long long)data_rate; + unsigned long long rem, mclk_ps = ULL_2E12; /* Now perform the big divide, the result fits in 32-bits */ - do_div(mclk_ps, data_rate); - result = mclk_ps; + rem = do_div(mclk_ps, data_rate); + result = (rem >= (data_rate >> 1)) ? mclk_ps + 1 : mclk_ps; - /* We still need to round to 10ps */ - return 10 * (result/10); + return result; } /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */ unsigned int picos_to_mclk(unsigned int picos) { unsigned long long clks, clks_rem; + unsigned long data_rate = get_ddr_freq(0); /* Short circuit for zero picos */ if (!picos) return 0; /* First multiply the time by the data rate (32x32 => 64) */ - clks = picos * (unsigned long long)get_ddr_freq(0); - + clks = picos * (unsigned long long)data_rate; /* * Now divide by 5^12 and track the 32-bit remainder, then divide * by 2*(2^12) using shifts (and updating the remainder). */ clks_rem = do_div(clks, UL_5POW12); - clks_rem <<= 13; - clks_rem |= clks & (UL_2POW13-1); + clks_rem += (clks & (UL_2POW13-1)) * UL_5POW12; clks >>= 13; - /* If we had a remainder, then round up */ - if (clks_rem) + /* If we had a remainder greater than the 1ps error, then round up */ + if (clks_rem > data_rate) clks++; /* Clamp to the maximum representable value */ @@ -133,10 +129,13 @@ fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params, void board_add_ram_info(int use_default) { -#if defined(CONFIG_MPC85xx) - volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); +#if defined(CONFIG_MPC83xx) + immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + ccsr_ddr_t *ddr = (void *)&immap->ddr; +#elif defined(CONFIG_MPC85xx) + ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); #elif defined(CONFIG_MPC86xx) - volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR); + ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR); #endif #if (CONFIG_NUM_DDR_CONTROLLERS > 1) uint32_t cs0_config = in_be32(&ddr->cs0_config); diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 285051d..5bb9f53 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -63,7 +63,7 @@ void ft_fixup_num_cores(void *blob) { while (off != -FDT_ERR_NOTFOUND) { u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); - if ((*reg > num_cores-1) || (is_core_disabled(*reg))) { + if (!is_core_valid(*reg) || is_core_disabled(*reg)) { int ph = fdt_get_phandle(blob, off); /* Delete the cpu node once there are no cpu handles */ diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c index e794821..6682496 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c @@ -43,10 +43,12 @@ void init_early_memctl_regs(void) set_ifc_ftim(IFC_CS0, IFC_FTIM2, CONFIG_SYS_CS0_FTIM2); set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3); +#if !defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) || defined(CONFIG_SYS_RAMBOOT) set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0); set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0); set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0); #endif +#endif #if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1) set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0); diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index 9aad9be..d138636 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -42,7 +42,10 @@ #define CONFIG_SYS_BOOT_GET_KBD #ifndef CONFIG_MAX_MEM_MAPPED -#if defined(CONFIG_4xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) +#if defined(CONFIG_4xx) || \ + defined(CONFIG_E500) || \ + defined(CONFIG_MPC86xx) || \ + defined(CONFIG_E300) #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30) #else #define CONFIG_MAX_MEM_MAPPED (256 << 20) @@ -96,6 +99,11 @@ #endif /* TSEC_ENET */ #endif /* !CONFIG_PHYLIB */ +/* The FMAN driver uses the PHYLIB infrastructure */ +#if defined(CONFIG_FMAN_ENET) +#define CONFIG_PHYLIB +#endif + /* All PPC boards must swap IDE bytes */ #define CONFIG_IDE_SWAP_IO diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 04ca989..c3d6ba9 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -23,6 +23,10 @@ /* SoC specific defines for Freescale MPC85xx (PQ3) and QorIQ processors */ +#ifdef CONFIG_SYS_CCSRBAR_DEFAULT +#error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file." +#endif + /* Number of TLB CAM entries we have on FSL Book-E chips */ #if defined(CONFIG_E500MC) #define CONFIG_SYS_NUM_TLBCAMS 64 @@ -34,34 +38,43 @@ #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8540) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8541) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8544) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8548) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +#define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120 +#define CONFIG_SYS_FSL_ERRATUM_NMG_LBC103 #elif defined(CONFIG_MPC8555) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8560) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8568) #define CONFIG_MAX_CPUS 1 @@ -70,6 +83,7 @@ #define QE_MURAM_SIZE 0x10000UL #define MAX_QE_RISC 2 #define QE_NUM_OF_SNUM 28 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8569) #define CONFIG_MAX_CPUS 1 @@ -78,11 +92,13 @@ #define QE_MURAM_SIZE 0x20000UL #define MAX_QE_RISC 4 #define QE_NUM_OF_SNUM 46 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8572) #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_DDR_115 #define CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 @@ -97,6 +113,10 @@ #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 +#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549 +#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 /* P1011 is single core version of P1020 */ #elif defined(CONFIG_P1011) @@ -105,6 +125,7 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 @@ -115,6 +136,7 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define QE_MURAM_SIZE 0x6000UL @@ -127,6 +149,7 @@ #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_FSL_SATA_ERRATUM_A001 @@ -141,6 +164,10 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 +#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549 +#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 /* P1015 is single core version of P1024 */ #elif defined(CONFIG_P1015) @@ -149,6 +176,7 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 @@ -164,6 +192,7 @@ #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* P1017 is single core version of P1023 */ #elif defined(CONFIG_P1017) @@ -177,6 +206,7 @@ #define CONFIG_SYS_BMAN_NUM_PORTALS 3 #define CONFIG_SYS_FM_MURAM_SIZE 0x10000 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000 #elif defined(CONFIG_P1020) #define CONFIG_MAX_CPUS 2 @@ -184,6 +214,7 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 @@ -193,6 +224,7 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define QE_MURAM_SIZE 0x6000UL @@ -204,6 +236,7 @@ #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_FSL_SATA_ERRATUM_A001 @@ -219,6 +252,7 @@ #define CONFIG_SYS_BMAN_NUM_PORTALS 3 #define CONFIG_SYS_FM_MURAM_SIZE 0x10000 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000 /* P1024 is lower end variant of P1020 */ #elif defined(CONFIG_P1024) @@ -227,6 +261,7 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 @@ -237,6 +272,7 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define QE_MURAM_SIZE 0x6000UL @@ -248,6 +284,7 @@ #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 @@ -255,6 +292,7 @@ #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 @@ -269,8 +307,10 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 32 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE #define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_PPC_P2041) @@ -285,8 +325,10 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 32 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE #define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_PPC_P3041) @@ -301,10 +343,27 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 32 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE #define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#elif defined(CONFIG_PPC_P3060) +#define CONFIG_MAX_CPUS 8 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 2 +#define CONFIG_SYS_NUM_FM1_DTSEC 4 +#define CONFIG_SYS_NUM_FM2_DTSEC 4 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003 + #elif defined(CONFIG_PPC_P4040) #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 4 @@ -313,6 +372,7 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,p4080-pcie" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #elif defined(CONFIG_PPC_P4080) #define CONFIG_MAX_CPUS 8 @@ -328,6 +388,7 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,p4080-pcie" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_ERRATUM_CPC_A002 #define CONFIG_SYS_FSL_ERRATUM_CPC_A003 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003 @@ -354,8 +415,10 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 32 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE #define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_PPC_P5020) @@ -370,12 +433,18 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 32 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE #define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #else #error Processor type not defined for this platform #endif +#ifndef CONFIG_SYS_CCSRBAR_DEFAULT +#error "CONFIG_SYS_CCSRBAR_DEFAULT is not defined for this platform." +#endif + #endif /* _ASM_MPC85xx_CONFIG_H_ */ diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index bc063ea..93639ba 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -31,6 +31,11 @@ #define DDR3_RTT_20_OHM 4 /* RTT_Nom = RZQ/12 */ #define DDR3_RTT_30_OHM 5 /* RTT_Nom = RZQ/8 */ +#define DDR2_RTT_OFF 0 +#define DDR2_RTT_75_OHM 1 +#define DDR2_RTT_150_OHM 2 +#define DDR2_RTT_50_OHM 3 + #if defined(CONFIG_FSL_DDR1) #define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (1) typedef ddr1_spd_eeprom_t generic_spd_eeprom_t; @@ -92,6 +97,10 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #define SDRAM_CFG2_D_INIT 0x00000010 #define SDRAM_CFG2_ODT_CFG_MASK 0x00600000 +#define SDRAM_CFG2_ODT_NEVER 0 +#define SDRAM_CFG2_ODT_ONLY_WRITE 1 +#define SDRAM_CFG2_ODT_ONLY_READ 2 +#define SDRAM_CFG2_ODT_ALWAYS 3 #define TIMING_CFG_2_CPO_MASK 0x0F800000 diff --git a/arch/powerpc/include/asm/fsl_dtsec.h b/arch/powerpc/include/asm/fsl_dtsec.h new file mode 100644 index 0000000..d1d993c --- /dev/null +++ b/arch/powerpc/include/asm/fsl_dtsec.h @@ -0,0 +1,244 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __DTSEC_H__ +#define __DTSEC_H__ + +#include <asm/types.h> + +struct dtsec { + u32 tsec_id; /* controller ID and version */ + u32 tsec_id2; /* controller ID and configuration */ + u32 ievent; /* interrupt event */ + u32 imask; /* interrupt mask */ + u32 res0; + u32 ecntrl; /* ethernet control and configuration */ + u32 ptv; /* pause time value */ + u32 tbipa; /* TBI PHY address */ + u32 res1[8]; + u32 tctrl; /* Transmit control register */ + u32 res2[3]; + u32 rctrl; /* Receive control register */ + u32 res3[11]; + u32 igaddr[8]; /* Individual group address */ + u32 gaddr[8]; /* group address */ + u32 res4[16]; + u32 maccfg1; /* MAC configuration register 1 */ + u32 maccfg2; /* MAC configuration register 2 */ + u32 ipgifg; /* inter-packet/inter-frame gap */ + u32 hafdup; /* half-duplex control */ + u32 maxfrm; /* Maximum frame size */ + u32 res5[3]; + u32 miimcfg; /* MII management configuration */ + u32 miimcom; /* MII management command */ + u32 miimadd; /* MII management address */ + u32 miimcon; /* MII management control */ + u32 miimstat; /* MII management status */ + u32 miimind; /* MII management indicator */ + u32 res6; + u32 ifstat; /* Interface status */ + u32 macstnaddr1; /* MAC station address 1 */ + u32 macstnaddr2; /* MAC station address 2 */ + u32 res7[46]; + /* transmit and receive counter */ + u32 tr64; /* Tx and Rx 64 bytes frame */ + u32 tr127; /* Tx and Rx 65 to 127 bytes frame */ + u32 tr255; /* Tx and Rx 128 to 255 bytes frame */ + u32 tr511; /* Tx and Rx 256 to 511 bytes frame */ + u32 tr1k; /* Tx and Rx 512 to 1023 bytes frame */ + u32 trmax; /* Tx and Rx 1024 to 1518 bytes frame */ + u32 trmgv; /* Tx and Rx 1519 to 1522 good VLAN frame */ + /* receive counters */ + u32 rbyt; /* Receive byte counter */ + u32 rpkt; /* Receive packet counter */ + u32 rfcs; /* Receive FCS error */ + u32 rmca; /* Receive multicast packet */ + u32 rbca; /* Receive broadcast packet */ + u32 rxcf; /* Receive control frame */ + u32 rxpf; /* Receive pause frame */ + u32 rxuo; /* Receive unknown OP code */ + u32 raln; /* Receive alignment error */ + u32 rflr; /* Receive frame length error */ + u32 rcde; /* Receive code error */ + u32 rcse; /* Receive carrier sense error */ + u32 rund; /* Receive undersize packet */ + u32 rovr; /* Receive oversize packet */ + u32 rfrg; /* Receive fragments counter */ + u32 rjbr; /* Receive jabber counter */ + u32 rdrp; /* Receive drop counter */ + /* transmit counters */ + u32 tbyt; /* Transmit byte counter */ + u32 tpkt; /* Transmit packet */ + u32 tmca; /* Transmit multicast packet */ + u32 tbca; /* Transmit broadcast packet */ + u32 txpf; /* Transmit pause control frame */ + u32 tdfr; /* Transmit deferral packet */ + u32 tedf; /* Transmit excessive deferral pkt */ + u32 tscl; /* Transmit single collision pkt */ + u32 tmcl; /* Transmit multiple collision pkt */ + u32 tlcl; /* Transmit late collision pkt */ + u32 txcl; /* Transmit excessive collision */ + u32 tncl; /* Transmit total collision */ + u32 res8; + u32 tdrp; /* Transmit drop frame */ + u32 tjbr; /* Transmit jabber frame */ + u32 tfcs; /* Transmit FCS error */ + u32 txcf; /* Transmit control frame */ + u32 tovr; /* Transmit oversize frame */ + u32 tund; /* Transmit undersize frame */ + u32 tfrg; /* Transmit fragments frame */ + /* counter controls */ + u32 car1; /* carry register 1 */ + u32 car2; /* carry register 2 */ + u32 cam1; /* carry register 1 mask */ + u32 cam2; /* carry register 2 mask */ + u32 res9[80]; +}; + + +/* TBI register addresses */ +#define TBI_CR 0x00 +#define TBI_SR 0x01 +#define TBI_ANA 0x04 +#define TBI_ANLPBPA 0x05 +#define TBI_ANEX 0x06 +#define TBI_TBICON 0x11 + +/* TBI MDIO register bit fields*/ +#define TBICON_CLK_SELECT 0x0020 +#define TBIANA_ASYMMETRIC_PAUSE 0x0100 +#define TBIANA_SYMMETRIC_PAUSE 0x0080 +#define TBIANA_HALF_DUPLEX 0x0040 +#define TBIANA_FULL_DUPLEX 0x0020 +#define TBICR_PHY_RESET 0x8000 +#define TBICR_ANEG_ENABLE 0x1000 +#define TBICR_RESTART_ANEG 0x0200 +#define TBICR_FULL_DUPLEX 0x0100 +#define TBICR_SPEED1_SET 0x0040 + +/* IEVENT - interrupt events register */ +#define IEVENT_BABR 0x80000000 /* Babbling receive error */ +#define IEVENT_RXC 0x40000000 /* pause control frame received */ +#define IEVENT_MSRO 0x04000000 /* MIB counter overflow */ +#define IEVENT_GTSC 0x02000000 /* Graceful transmit stop complete */ +#define IEVENT_BABT 0x01000000 /* Babbling transmit error */ +#define IEVENT_TXC 0x00800000 /* control frame transmitted */ +#define IEVENT_TXE 0x00400000 /* Transmit channel error */ +#define IEVENT_LC 0x00040000 /* Late collision occurred */ +#define IEVENT_CRL 0x00020000 /* Collision retry exceed limit */ +#define IEVENT_XFUN 0x00010000 /* Transmit FIFO underrun */ +#define IEVENT_ABRT 0x00008000 /* Transmit packet abort */ +#define IEVENT_MMRD 0x00000400 /* MII management read complete */ +#define IEVENT_MMWR 0x00000200 /* MII management write complete */ +#define IEVENT_GRSC 0x00000100 /* Graceful stop complete */ +#define IEVENT_TDPE 0x00000002 /* Internal data parity error on Tx */ +#define IEVENT_RDPE 0x00000001 /* Internal data parity error on Rx */ + +#define IEVENT_CLEAR_ALL 0xffffffff + +/* IMASK - interrupt mask register */ +#define IMASK_BREN 0x80000000 /* Babbling receive enable */ +#define IMASK_RXCEN 0x40000000 /* receive control enable */ +#define IMASK_MSROEN 0x04000000 /* MIB counter overflow enable */ +#define IMASK_GTSCEN 0x02000000 /* Graceful Tx stop complete enable */ +#define IMASK_BTEN 0x01000000 /* Babbling transmit error enable */ +#define IMASK_TXCEN 0x00800000 /* control frame transmitted enable */ +#define IMASK_TXEEN 0x00400000 /* Transmit channel error enable */ +#define IMASK_LCEN 0x00040000 /* Late collision interrupt enable */ +#define IMASK_CRLEN 0x00020000 /* Collision retry exceed limit */ +#define IMASK_XFUNEN 0x00010000 /* Transmit FIFO underrun enable */ +#define IMASK_ABRTEN 0x00008000 /* Transmit packet abort enable */ +#define IMASK_MMRDEN 0x00000400 /* MII management read complete enable */ +#define IMASK_MMWREN 0x00000200 /* MII management write complete enable */ +#define IMASK_GRSCEN 0x00000100 /* Graceful stop complete interrupt enable */ +#define IMASK_TDPEEN 0x00000002 /* Internal data parity error on Tx enable */ +#define IMASK_RDPEEN 0x00000001 /* Internal data parity error on Rx enable */ + +#define IMASK_MASK_ALL 0x00000000 + +/* ECNTRL - ethernet control register */ +#define ECNTRL_CFG_RO 0x80000000 /* GMIIM, RPM, R100M, SGMIIM bits are RO */ +#define ECNTRL_CLRCNT 0x00004000 /* clear all statistics */ +#define ECNTRL_AUTOZ 0x00002000 /* auto zero MIB counter */ +#define ECNTRL_STEN 0x00001000 /* enable internal counters to update */ +#define ECNTRL_GMIIM 0x00000040 /* 1- GMII or RGMII interface mode */ +#define ECNTRL_TBIM 0x00000020 /* 1- Ten-bit interface mode */ +#define ECNTRL_RPM 0x00000010 /* 1- RGMII reduced-pin mode */ +#define ECNTRL_R100M 0x00000008 /* 1- RGMII 100 Mbps, SGMII 100 Mbps + 0- RGMII 10 Mbps, SGMII 10 Mbps */ +#define ECNTRL_SGMIIM 0x00000002 /* 1- SGMII interface mode */ +#define ECNTRL_TBIM 0x00000020 /* 1- TBI Interface mode (for SGMII) */ + +#define ECNTRL_DEFAULT (ECNTRL_TBIM | ECNTRL_R100M | ECNTRL_SGMIIM) + +/* TCTRL - Transmit control register */ +#define TCTRL_THDF 0x00000800 /* Transmit half-duplex flow control */ +#define TCTRL_TTSE 0x00000040 /* Transmit time-stamp enable */ +#define TCTRL_GTS 0x00000020 /* Graceful transmit stop */ +#define TCTRL_RFC_PAUSE 0x00000010 /* Receive flow control pause frame */ + +/* RCTRL - Receive control register */ +#define RCTRL_PAL_MASK 0x001f0000 /* packet alignment padding length */ +#define RCTRL_PAL_SHIFT 16 +#define RCTRL_CFA 0x00008000 /* control frame accept enable */ +#define RCTRL_GHTX 0x00000800 /* group address hash table extend */ +#define RCTRL_RTSE 0x00000040 /* receive 1588 time-stamp enable */ +#define RCTRL_GRS 0x00000020 /* graceful receive stop */ +#define RCTRL_BC_REJ 0x00000010 /* broadcast frame reject */ +#define RCTRL_BC_MPROM 0x00000008 /* all multicast/broadcast frames received */ +#define RCTRL_RSF 0x00000004 /* receive short frame(17~63 bytes) enable */ +#define RCTRL_EMEN 0x00000002 /* Exact match MAC address enable */ +#define RCTRL_UPROM 0x00000001 /* all unicast frame received */ + +/* MACCFG1 - MAC configuration 1 register */ +#define MACCFG1_SOFT_RST 0x80000000 /* place the MAC in reset */ +#define MACCFG1_RST_RXMAC 0x00080000 /* reset receive MAC control block */ +#define MACCFG1_RST_TXMAC 0x00040000 /* reet transmit MAC control block */ +#define MACCFG1_RST_RXFUN 0x00020000 /* reset receive function block */ +#define MACCFG1_RST_TXFUN 0x00010000 /* reset transmit function block */ +#define MACCFG1_LOOPBACK 0x00000100 /* MAC loopback */ +#define MACCFG1_RX_FLOW 0x00000020 /* Receive flow */ +#define MACCFG1_TX_FLOW 0x00000010 /* Transmit flow */ +#define MACCFG1_SYNC_RXEN 0x00000008 /* Frame reception enabled */ +#define MACCFG1_RX_EN 0x00000004 /* Rx enable */ +#define MACCFG1_SYNC_TXEN 0x00000002 /* Frame transmission is enabled */ +#define MACCFG1_TX_EN 0x00000001 /* Tx enable */ +#define MACCFG1_RXTX_EN (MACCFG1_RX_EN | MACCFG1_TX_EN) + +/* MACCFG2 - MAC configuration 2 register */ +#define MACCFG2_PRE_LEN_MASK 0x0000f000 /* preamble length */ +#define MACCFG2_PRE_LEN(x) ((x << 12) & MACCFG2_PRE_LEN_MASK) +#define MACCFG2_IF_MODE_MASK 0x00000300 +#define MACCFG2_IF_MODE_NIBBLE 0x00000100 /* MII, 10/100 Mbps MII/RMII */ +#define MACCFG2_IF_MODE_BYTE 0x00000200 /* GMII/TBI, 1000 GMII/TBI */ +#define MACCFG2_PRE_RX_EN 0x00000080 /* receive preamble enable */ +#define MACCFG2_PRE_TX_EN 0x00000040 /* tx preable enable */ +#define MACCFG2_HUGE_FRAME 0x00000020 /* >= max frame len enable */ +#define MACCFG2_LEN_CHECK 0x00000010 /* MAC check frame's length Rx */ +#define MACCFG2_MAG_EN 0x00000008 /* magic packet enable */ +#define MACCFG2_PAD_CRC 0x00000004 /* pad and append CRC */ +#define MACCFG2_CRC_EN 0x00000002 /* MAC appends a CRC on all frames */ +#define MACCFG2_FULL_DUPLEX 0x00000001 /* Full deplex mode */ + +struct fsl_enet_mac; + +void init_dtsec(struct fsl_enet_mac *mac, void *base, void *phyregs, + int max_rx_len); + +#endif diff --git a/arch/powerpc/include/asm/fsl_fman.h b/arch/powerpc/include/asm/fsl_fman.h index 6c01ffc..fddc0cc 100644 --- a/arch/powerpc/include/asm/fsl_fman.h +++ b/arch/powerpc/include/asm/fsl_fman.h @@ -1,7 +1,7 @@ /* * MPC85xx Internal Memory Map * - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -82,6 +82,189 @@ typedef struct fm_qmi { u8 res[1024]; } fm_qmi_t; +struct fm_bmi_rx_port { + u32 fmbm_rcfg; /* Rx configuration */ + u32 fmbm_rst; /* Rx status */ + u32 fmbm_rda; /* Rx DMA attributes */ + u32 fmbm_rfp; /* Rx FIFO parameters */ + u32 fmbm_rfed; /* Rx frame end data */ + u32 fmbm_ricp; /* Rx internal context parameters */ + u32 fmbm_rim; /* Rx internal margins */ + u32 fmbm_rebm; /* Rx external buffer margins */ + u32 fmbm_rfne; /* Rx frame next engine */ + u32 fmbm_rfca; /* Rx frame command attributes */ + u32 fmbm_rfpne; /* Rx frame parser next engine */ + u32 fmbm_rpso; /* Rx parse start offset */ + u32 fmbm_rpp; /* Rx policer profile */ + u32 fmbm_rccb; /* Rx coarse classification base */ + u32 res1[0x2]; + u32 fmbm_rprai[0x8]; /* Rx parse results array Initialization */ + u32 fmbm_rfqid; /* Rx frame queue ID */ + u32 fmbm_refqid; /* Rx error frame queue ID */ + u32 fmbm_rfsdm; /* Rx frame status discard mask */ + u32 fmbm_rfsem; /* Rx frame status error mask */ + u32 fmbm_rfene; /* Rx frame enqueue next engine */ + u32 res2[0x23]; + u32 fmbm_ebmpi[0x8]; /* buffer manager pool information */ + u32 fmbm_acnt[0x8]; /* allocate counter */ + u32 res3[0x8]; + u32 fmbm_cgm[0x8]; /* congestion group map */ + u32 fmbm_mpd; /* BMan pool depletion */ + u32 res4[0x1F]; + u32 fmbm_rstc; /* Rx statistics counters */ + u32 fmbm_rfrc; /* Rx frame counters */ + u32 fmbm_rfbc; /* Rx bad frames counter */ + u32 fmbm_rlfc; /* Rx large frames counter */ + u32 fmbm_rffc; /* Rx filter frames counter */ + u32 fmbm_rfdc; /* Rx frame discard counter */ + u32 fmbm_rfldec; /* Rx frames list DMA error counter */ + u32 fmbm_rodc; /* Rx out of buffers discard counter */ + u32 fmbm_rbdc; /* Rx buffers deallocate counter */ + u32 res5[0x17]; + u32 fmbm_rpc; /* Rx performance counters */ + u32 fmbm_rpcp; /* Rx performance count parameters */ + u32 fmbm_rccn; /* Rx cycle counter */ + u32 fmbm_rtuc; /* Rx tasks utilization counter */ + u32 fmbm_rrquc; /* Rx receive queue utilization counter */ + u32 fmbm_rduc; /* Rx DMA utilization counter */ + u32 fmbm_rfuc; /* Rx FIFO utilization counter */ + u32 fmbm_rpac; /* Rx pause activation counter */ + u32 res6[0x18]; + u32 fmbm_rdbg; /* Rx debug configuration */ +}; + +/* FMBM_RCFG - Rx configuration */ +#define FMBM_RCFG_EN 0x80000000 /* port is enabled to receive data */ +#define FMBM_RCFG_FDOVR 0x02000000 /* frame discard override */ +#define FMBM_RCFG_IM 0x01000000 /* independent mode */ + +/* FMBM_RST - Rx status */ +#define FMBM_RST_BSY 0x80000000 /* Rx port is busy */ + +/* FMBM_RFCA - Rx frame command attributes */ +#define FMBM_RFCA_ORDER 0x80000000 +#define FMBM_RFCA_MR_MASK 0x003f0000 +#define FMBM_RFCA_MR(x) ((x << 16) & FMBM_RFCA_MR_MASK) + +/* FMBM_RSTC - Rx statistics */ +#define FMBM_RSTC_EN 0x80000000 /* statistics counters enable */ + +struct fm_bmi_tx_port { + u32 fmbm_tcfg; /* Tx configuration */ + u32 fmbm_tst; /* Tx status */ + u32 fmbm_tda; /* Tx DMA attributes */ + u32 fmbm_tfp; /* Tx FIFO parameters */ + u32 fmbm_tfed; /* Tx frame end data */ + u32 fmbm_ticp; /* Tx internal context parameters */ + u32 fmbm_tfne; /* Tx frame next engine */ + u32 fmbm_tfca; /* Tx frame command attributes */ + u32 fmbm_tcfqid;/* Tx confirmation frame queue ID */ + u32 fmbm_tfeqid;/* Tx error frame queue ID */ + u32 fmbm_tfene; /* Tx frame enqueue next engine */ + u32 fmbm_trlmts;/* Tx rate limiter scale */ + u32 fmbm_trlmt; /* Tx rate limiter */ + u32 res0[0x73]; + u32 fmbm_tstc; /* Tx statistics counters */ + u32 fmbm_tfrc; /* Tx frame counter */ + u32 fmbm_tfdc; /* Tx frames discard counter */ + u32 fmbm_tfledc;/* Tx frame length error discard counter */ + u32 fmbm_tfufdc;/* Tx frame unsupported format discard counter */ + u32 fmbm_tbdc; /* Tx buffers deallocate counter */ + u32 res1[0x1a]; + u32 fmbm_tpc; /* Tx performance counters */ + u32 fmbm_tpcp; /* Tx performance count parameters */ + u32 fmbm_tccn; /* Tx cycle counter */ + u32 fmbm_ttuc; /* Tx tasks utilization counter */ + u32 fmbm_ttcquc;/* Tx transmit confirm queue utilization counter */ + u32 fmbm_tduc; /* Tx DMA utilization counter */ + u32 fmbm_tfuc; /* Tx FIFO utilization counter */ + u32 res2[0x19]; + u32 fmbm_tdcfg; /* Tx debug configuration */ +}; + +/* FMBM_TCFG - Tx configuration */ +#define FMBM_TCFG_EN 0x80000000 /* port is enabled to transmit data */ +#define FMBM_TCFG_IM 0x01000000 /* independent mode enable */ + +/* FMBM_TST - Tx status */ +#define FMBM_TST_BSY 0x80000000 /* Tx port is busy */ + +/* FMBM_TFCA - Tx frame command attributes */ +#define FMBM_TFCA_ORDER 0x80000000 +#define FMBM_TFCA_MR_MASK 0x003f0000 +#define FMBM_TFCA_MR(x) ((x << 16) & FMBM_TFCA_MR_MASK) + +/* FMBM_TSTC - Tx statistics counters */ +#define FMBM_TSTC_EN 0x80000000 + +/* FMBM_INIT - BMI initialization register */ +#define FMBM_INIT_START 0x80000000 /* init internal buffers */ + +/* FMBM_CFG1 - BMI configuration 1 */ +#define FMBM_CFG1_FBPS_MASK 0x03ff0000 /* Free buffer pool size */ +#define FMBM_CFG1_FBPS_SHIFT 16 +#define FMBM_CFG1_FBPO_MASK 0x000003ff /* Free buffer pool offset */ + +/* FMBM_IEVR - interrupt event */ +#define FMBM_IEVR_PEC 0x80000000 /* pipeline table ECC err detected */ +#define FMBM_IEVR_LEC 0x40000000 /* linked list RAM ECC error */ +#define FMBM_IEVR_SEC 0x20000000 /* statistics count RAM ECC error */ +#define FMBM_IEVR_CLEAR_ALL (FMBM_IEVR_PEC | FMBM_IEVR_LEC | FMBM_IEVR_SEC) + +/* FMBM_IER - interrupt enable */ +#define FMBM_IER_PECE 0x80000000 /* PEC interrupt enable */ +#define FMBM_IER_LECE 0x40000000 /* LEC interrupt enable */ +#define FMBM_IER_SECE 0x20000000 /* SEC interrupt enable */ + +#define FMBM_IER_DISABLE_ALL 0x00000000 + +/* FMBM_PP - BMI Port Parameters */ +#define FMBM_PP_MXT_MASK 0x3f000000 /* Max # tasks */ +#define FMBM_PP_MXT(x) (((x-1) << 24) & FMBM_PP_MXT_MASK) +#define FMBM_PP_MXD_MASK 0x00000f00 /* Max DMA */ +#define FMBM_PP_MXD(x) (((x-1) << 8) & FMBM_PP_MXD_MASK) + +/* FMBM_PFS - BMI Port FIFO Size */ +#define FMBM_PFS_IFSZ_MASK 0x000003ff /* Internal Fifo Size */ +#define FMBM_PFS_IFSZ(x) (x & FMBM_PFS_IFSZ_MASK) + +/* FMQM_GC - global configuration */ +#define FMQM_GC_ENQ_EN 0x80000000 /* enqueue enable */ +#define FMQM_GC_DEQ_EN 0x40000000 /* dequeue enable */ +#define FMQM_GC_STEN 0x10000000 /* enable global stat counters */ +#define FMQM_GC_ENQ_THR_MASK 0x00003f00 /* max number of enqueue Tnum */ +#define FMQM_GC_ENQ(x) ((x << 8) & FMQM_GC_ENQ_THR_MAS) +#define FMQM_GC_DEQ_THR_MASK 0x0000003f /* max number of dequeue Tnum */ +#define FMQM_GC_DEQ(x) (x & FMQM_GC_DEQ_THR_MASK) + +/* FMQM_EIE - error interrupt event register */ +#define FMQM_EIE_DEE 0x80000000 /* double-bit ECC error */ +#define FMQM_EIE_DFUPE 0x40000000 /* dequeue from unknown PortID */ +#define FMQM_EIE_CLEAR_ALL (FMQM_EIE_DEE | FMQM_EIE_DFUPE) + +/* FMQM_EIEN - error interrupt enable register */ +#define FMQM_EIEN_DEEN 0x80000000 /* double-bit ECC error */ +#define FMQM_EIEN_DFUPEN 0x40000000 /* dequeue from unknown PortID */ +#define FMQM_EIEN_DISABLE_ALL 0x00000000 + +/* FMQM_IE - interrupt event register */ +#define FMQM_IE_SEE 0x80000000 /* single-bit ECC error detected */ +#define FMQM_IE_CLEAR_ALL FMQM_IE_SEE + +/* FMQM_IEN - interrupt enable register */ +#define FMQM_IEN_SEE 0x80000000 /* single-bit ECC err IRQ enable */ +#define FMQM_IEN_DISABLE_ALL 0x00000000 + +/* NIA - next invoked action */ +#define NIA_ENG_RISC 0x00000000 +#define NIA_ENG_MASK 0x007c0000 + +/* action code */ +#define NIA_RISC_AC_CC 0x00000006 +#define NIA_RISC_AC_IM_TX 0x00000008 /* independent mode Tx */ +#define NIA_RISC_AC_IM_RX 0x0000000a /* independent mode Rx */ +#define NIA_RISC_AC_HC 0x0000000c + typedef struct fm_parser { u8 res[1024]; } fm_parser_t; @@ -113,6 +296,27 @@ typedef struct fm_dma { u32 res[0x3c8]; } fm_dma_t; +/* FMDMSR - Fman DMA status register */ +#define FMDMSR_CMDQNE 0x10000000 /* command queue not empty */ +#define FMDMSR_BER 0x08000000 /* bus err event occurred on bus */ +#define FMDMSR_RDB_ECC 0x04000000 /* read buffer ECC error */ +#define FMDMSR_WRB_SECC 0x02000000 /* write buf ECC err sys side */ +#define FMDMSR_WRB_FECC 0x01000000 /* write buf ECC err Fman side */ +#define FMDMSR_DPEXT_SECC 0x00800000 /* DP external ECC err sys side */ +#define FMDMSR_DPEXT_FECC 0x00400000 /* DP external ECC err Fman side */ +#define FMDMSR_DPDAT_SECC 0x00200000 /* DP data ECC err on sys side */ +#define FMDMSR_DPDAT_FECC 0x00100000 /* DP data ECC err on Fman side */ +#define FMDMSR_SPDAT_FECC 0x00080000 /* SP data ECC error Fman side */ + +#define FMDMSR_CLEAR_ALL (FMDMSR_BER | FMDMSR_RDB_ECC \ + | FMDMSR_WRB_SECC | FMDMSR_WRB_FECC \ + | FMDMSR_DPEXT_SECC | FMDMSR_DPEXT_FECC \ + | FMDMSR_DPDAT_SECC | FMDMSR_DPDAT_FECC \ + | FMDMSR_SPDAT_FECC) + +/* FMDMMR - FMan DMA mode register */ +#define FMDMMR_SBER 0x10000000 /* stop the DMA if a bus error */ + typedef struct fm_fpm { u32 fpmtnc; /* TNUM control */ u32 fpmprc; /* Port_ID control */ @@ -141,7 +345,7 @@ typedef struct fm_fpm { u32 fmcld; /* classifier debug control */ u32 fmnpi; /* normal pending interrupts */ u32 res5; - u32 fmnee; /* event and enable */ + u32 fmfpee; /* event and enable */ u32 fpmcev[0x4]; /* CPU event 0-3 */ u32 res6[0x4]; u32 fmfp_ps[0x40]; /* port status */ @@ -150,9 +354,47 @@ typedef struct fm_fpm { u32 res8[0xa0]; } fm_fpm_t; +/* FMFP_PRC - FPM Port_ID Control Register */ +#define FMFPPRC_PORTID_MASK 0x3f000000 +#define FMFPPRC_PORTID_SHIFT 24 +#define FMFPPRC_ORA_SHIFT 16 +#define FMFPPRC_RISC1 0x00000001 +#define FMFPPRC_RISC2 0x00000002 +#define FMFPPRC_RISC_ALL (FMFPPRC_RISC1 | FMFPPRC_RSIC2) + +/* FPM Flush Control Register */ +#define FMFP_FLC_DISP_LIM_NONE 0x00000000 /* no dispatch limitation */ + +/* FMFP_EE - FPM event and enable register */ +#define FMFPEE_DECC 0x80000000 /* double ECC err on FPM ram */ +#define FMFPEE_STL 0x40000000 /* stall of task ... */ +#define FMFPEE_SECC 0x20000000 /* single ECC error */ +#define FMFPEE_RFM 0x00010000 /* release FMan */ +#define FMFPEE_DECC_EN 0x00008000 /* double ECC interrupt enable */ +#define FMFPEE_STL_EN 0x00004000 /* stall of task interrupt enable */ +#define FMFPEE_SECC_EN 0x00002000 /* single ECC err interrupt enable */ +#define FMFPEE_EHM 0x00000008 /* external halt enable */ +#define FMFPEE_UEC 0x00000004 /* FMan is not halted */ +#define FMFPEE_CER 0x00000002 /* only errornous task stalled */ +#define FMFPEE_DER 0x00000001 /* DMA error is just reported */ + +#define FMFPEE_CLEAR_EVENT (FMFPEE_DECC | FMFPEE_STL | FMFPEE_SECC | \ + FMFPEE_EHM | FMFPEE_UEC | FMFPEE_CER | \ + FMFPEE_DER | FMFPEE_RFM) + +/* FMFP_RCR - FMan Rams Control and Event */ +#define FMFP_RCR_MDEC 0x00008000 /* double ECC error in muram */ +#define FMFP_RCR_IDEC 0x00004000 /* double ECC error in iram */ + typedef struct fm_imem { - u8 res[4*1024]; + u32 iadd; /* instruction address register */ + u32 idata; /* instruction data register */ + u32 itcfg; /* timing config register */ + u32 iready; /* ready register */ + u8 res[0xff0]; } fm_imem_t; +#define IRAM_IADD_AIE 0x80000000 /* address auto increase enable */ +#define IRAM_READY 0x80000000 /* ready to use */ typedef struct fm_soft_parser { u8 res[4*1024]; @@ -200,10 +442,11 @@ typedef struct ccsr_fman { struct { fm_dtsec_t fm_dtesc; fm_mdio_t fm_mdio; - } mac[4]; - u8 res3[32*1024]; - fm_10gec_t fm_10gec; - fm_10gec_mdio_t fm_10gec_mdio; + } mac_1g[8]; /* support up to 8 1g controllers */ + struct { + fm_10gec_t fm_10gec; + fm_10gec_mdio_t fm_10gec_mdio; + } mac_10g[1]; u8 res4[48*1024]; fm_1588_t fm_1588; u8 res5[4*1024]; diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h index d4d9809..7d95eb4 100644 --- a/arch/powerpc/include/asm/fsl_ifc.h +++ b/arch/powerpc/include/asm/fsl_ifc.h @@ -69,6 +69,7 @@ */ /* Enable ECC Encoder */ #define CSOR_NAND_ECC_ENC_EN 0x80000000 +#define CSOR_NAND_ECC_MODE_MASK 0x30000000 /* 4 bit correction per 520 Byte sector */ #define CSOR_NAND_ECC_MODE_4 0x00000000 /* 8 bit correction per 528 Byte sector */ @@ -857,10 +858,7 @@ struct fsl_ifc_nand { u32 res19[0x10]; u32 nand_fsr; u32 res20; - u32 nand_eccstat0; - u32 nand_eccstat1; - u32 nand_eccstat2; - u32 nand_eccstat3; + u32 nand_eccstat[4]; u32 res21[0x20]; u32 nanndcr; u32 res22[0x2]; @@ -953,5 +951,10 @@ struct fsl_ifc { struct fsl_ifc_gpcm ifc_gpcm; }; +#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A002769 +#undef CSPR_MSEL_NOR +#define CSPR_MSEL_NOR CSPR_MSEL_GPCM +#endif + #endif /* __ASSEMBLY__ */ #endif /* __ASM_PPC_FSL_IFC_H */ diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index 801571f..9ad104e 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -147,9 +147,18 @@ extern void fdt_fixup_liodn(void *blob); offsetof(ccsr_sec_t, decoliodnr[num].ls) + \ CONFIG_SYS_FSL_SEC_OFFSET, 0) +#define SET_RAID_ENGINE_JQ_LIODN_ENTRY(jqNum, rNum, liodnA) \ + SET_LIODN_ENTRY_1("fsl,raideng-v1.0-job-ring", \ + liodnA, \ + offsetof(struct ccsr_raide, jq[jqNum].ring[rNum].cfg1) + \ + CONFIG_SYS_FSL_RAID_ENGINE_OFFSET, \ + offsetof(struct ccsr_raide, jq[jqNum].ring[rNum].cfg0) + \ + CONFIG_SYS_FSL_RAID_ENGINE_OFFSET) + extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[]; +extern struct liodn_id_table raide_liodn_tbl[]; extern struct liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[]; -extern int liodn_tbl_sz, sec_liodn_tbl_sz; +extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz; extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz; #endif diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h index e1c1212..8c3ea0b 100644 --- a/arch/powerpc/include/asm/fsl_portals.h +++ b/arch/powerpc/include/asm/fsl_portals.h @@ -35,6 +35,9 @@ enum fsl_dpaa_dev { #ifdef CONFIG_SYS_DPAA_PME FSL_HW_PORTAL_PME, #endif +#ifdef CONFIG_SYS_FSL_RAID_ENGINE + FSL_HW_PORTAL_RAID_ENGINE, +#endif }; struct qportal_info { diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h new file mode 100644 index 0000000..d1c1967 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -0,0 +1,43 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FSL_SECURE_BOOT_H +#define __FSL_SECURE_BOOT_H + +/* Starting TLB number for the TLB entried for 3.5 G space created by ISBC */ +#if defined(CONFIG_FSL_CORENET) +#define CONFIG_SYS_ISBC_START_TLB 3 +#else +#define CONFIG_SYS_ISBC_START_TLB 0 +#endif + +/* Number fo TLB's created by ISBC */ +#define CONFIG_SYS_ISBC_NUM_TLBS 5 + +#if defined(CONFIG_FSL_CORENET) +#define CONFIG_SYS_PBI_FLASH_BASE 0xc0000000 +#else +#define CONFIG_SYS_PBI_FLASH_BASE 0xce000000 +#endif +#define CONFIG_SYS_PBI_FLASH_WINDOW 0xcff80000 + +#endif diff --git a/arch/powerpc/include/asm/fsl_tgec.h b/arch/powerpc/include/asm/fsl_tgec.h new file mode 100644 index 0000000..8de37c9 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_tgec.h @@ -0,0 +1,215 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __TGEC_H__ +#define __TGEC_H__ + +#include <phy.h> + +struct tgec { + /* 10GEC general control and status registers */ + u32 tgec_id; /* Controller ID register */ + u32 res0; + u32 command_config; /* Control and configuration register */ + u32 mac_addr_0; /* Lower 32 bits of 48-bit MAC address */ + u32 mac_addr_1; /* Upper 16 bits of 48-bit MAC address */ + u32 maxfrm; /* Maximum frame length register */ + u32 pause_quant; /* Pause quanta register */ + u32 res1[4]; + u32 hashtable_ctrl; /* Hash table control register */ + u32 res2[4]; + u32 status; /* MAC status register */ + u32 tx_ipg_length; /* Transmitter inter-packet-gap register */ + u32 mac_addr_2; /* Lower 32 bits of the 2nd 48-bit MAC addr */ + u32 mac_addr_3; /* Upper 16 bits of the 2nd 48-bit MAC addr */ + u32 res3[4]; + u32 imask; /* Interrupt mask register */ + u32 ievent; /* Interrupt event register */ + u32 res4[6]; + /* 10GEC statistics counter registers */ + u32 tx_frame_u; /* Tx frame counter upper */ + u32 tx_frame_l; /* Tx frame counter lower */ + u32 rx_frame_u; /* Rx frame counter upper */ + u32 rx_frame_l; /* Rx frame counter lower */ + u32 rx_frame_crc_err_u; /* Rx frame check sequence error upper */ + u32 rx_frame_crc_err_l; /* Rx frame check sequence error lower */ + u32 rx_align_err_u; /* Rx alignment error upper */ + u32 rx_align_err_l; /* Rx alignment error lower */ + u32 tx_pause_frame_u; /* Tx valid pause frame upper */ + u32 tx_pause_frame_l; /* Tx valid pause frame lower */ + u32 rx_pause_frame_u; /* Rx valid pause frame upper */ + u32 rx_pause_frame_l; /* Rx valid pause frame upper */ + u32 rx_long_err_u; /* Rx too long frame error upper */ + u32 rx_long_err_l; /* Rx too long frame error lower */ + u32 rx_frame_err_u; /* Rx frame length error upper */ + u32 rx_frame_err_l; /* Rx frame length error lower */ + u32 tx_vlan_u; /* Tx VLAN frame upper */ + u32 tx_vlan_l; /* Tx VLAN frame lower */ + u32 rx_vlan_u; /* Rx VLAN frame upper */ + u32 rx_vlan_l; /* Rx VLAN frame lower */ + u32 tx_oct_u; /* Tx octets upper */ + u32 tx_oct_l; /* Tx octets lower */ + u32 rx_oct_u; /* Rx octets upper */ + u32 rx_oct_l; /* Rx octets lower */ + u32 rx_uni_u; /* Rx unicast frame upper */ + u32 rx_uni_l; /* Rx unicast frame lower */ + u32 rx_multi_u; /* Rx multicast frame upper */ + u32 rx_multi_l; /* Rx multicast frame lower */ + u32 rx_brd_u; /* Rx broadcast frame upper */ + u32 rx_brd_l; /* Rx broadcast frame lower */ + u32 tx_frame_err_u; /* Tx frame error upper */ + u32 tx_frame_err_l; /* Tx frame error lower */ + u32 tx_uni_u; /* Tx unicast frame upper */ + u32 tx_uni_l; /* Tx unicast frame lower */ + u32 tx_multi_u; /* Tx multicast frame upper */ + u32 tx_multi_l; /* Tx multicast frame lower */ + u32 tx_brd_u; /* Tx broadcast frame upper */ + u32 tx_brd_l; /* Tx broadcast frame lower */ + u32 rx_drop_u; /* Rx dropped packets upper */ + u32 rx_drop_l; /* Rx dropped packets lower */ + u32 rx_eoct_u; /* Rx ethernet octets upper */ + u32 rx_eoct_l; /* Rx ethernet octets lower */ + u32 rx_pkt_u; /* Rx packets upper */ + u32 rx_pkt_l; /* Rx packets lower */ + u32 tx_undsz_u; /* Undersized packet upper */ + u32 tx_undsz_l; /* Undersized packet lower */ + u32 rx_64_u; /* Rx 64 oct packet upper */ + u32 rx_64_l; /* Rx 64 oct packet lower */ + u32 rx_127_u; /* Rx 65 to 127 oct packet upper */ + u32 rx_127_l; /* Rx 65 to 127 oct packet lower */ + u32 rx_255_u; /* Rx 128 to 255 oct packet upper */ + u32 rx_255_l; /* Rx 128 to 255 oct packet lower */ + u32 rx_511_u; /* Rx 256 to 511 oct packet upper */ + u32 rx_511_l; /* Rx 256 to 511 oct packet lower */ + u32 rx_1023_u; /* Rx 512 to 1023 oct packet upper */ + u32 rx_1023_l; /* Rx 512 to 1023 oct packet lower */ + u32 rx_1518_u; /* Rx 1024 to 1518 oct packet upper */ + u32 rx_1518_l; /* Rx 1024 to 1518 oct packet lower */ + u32 rx_1519_u; /* Rx 1519 to max oct packet upper */ + u32 rx_1519_l; /* Rx 1519 to max oct packet lower */ + u32 tx_oversz_u; /* oversized packet upper */ + u32 tx_oversz_l; /* oversized packet lower */ + u32 tx_jabber_u; /* Jabber packet upper */ + u32 tx_jabber_l; /* Jabber packet lower */ + u32 tx_frag_u; /* Fragment packet upper */ + u32 tx_frag_l; /* Fragment packet lower */ + u32 rx_err_u; /* Rx frame error upper */ + u32 rx_err_l; /* Rx frame error lower */ + u32 res5[0x39a]; +}; + +/* EC10G_ID - 10-gigabit ethernet MAC controller ID */ +#define EC10G_ID_VER_MASK 0x0000ff00 +#define EC10G_ID_VER_SHIFT 8 +#define EC10G_ID_REV_MASK 0x000000ff + +/* COMMAND_CONFIG - command and configuration register */ +#define TGEC_CMD_CFG_EN_TIMESTAMP 0x00100000 /* enable IEEE1588 */ +#define TGEC_CMD_CFG_TX_ADDR_INS_SEL 0x00080000 /* Tx mac addr w/ second */ +#define TGEC_CMD_CFG_NO_LEN_CHK 0x00020000 /* payload len chk disable */ +#define TGEC_CMD_CFG_SEND_IDLE 0x00010000 /* send XGMII idle seqs */ +#define TGEC_CMD_CFG_RX_ER_DISC 0x00004000 /* Rx err frm discard enb */ +#define TGEC_CMD_CFG_CMD_FRM_EN 0x00002000 /* CMD frame RX enable */ +#define TGEC_CMD_CFG_STAT_CLR 0x00001000 /* clear stats */ +#define TGEC_CMD_CFG_TX_ADDR_INS 0x00000200 /* overwrite src MAC addr */ +#define TGEC_CMD_CFG_PAUSE_IGNORE 0x00000100 /* ignore pause frames */ +#define TGEC_CMD_CFG_PAUSE_FWD 0x00000080 /* fwd pause frames */ +#define TGEC_CMD_CFG_CRC_FWD 0x00000040 /* fwd Rx CRC frames */ +#define TGEC_CMD_CFG_PAD_EN 0x00000020 /* MAC remove Rx padding */ +#define TGEC_CMD_CFG_PROM_EN 0x00000010 /* promiscuous mode enable */ +#define TGEC_CMD_CFG_WAN_MODE 0x00000008 /* WAN mode enable */ +#define TGEC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */ +#define TGEC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */ +#define TGEC_CMD_CFG_RXTX_EN (TGEC_CMD_CFG_RX_EN | TGEC_CMD_CFG_TX_EN) + +/* HASHTABLE_CTRL - Hashtable control register */ +#define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */ +#define HASHTABLE_CTRL_ADDR_MASK 0x000001ff + +/* TX_IPG_LENGTH - Transmit inter-packet gap length register */ +#define TX_IPG_LENGTH_IPG_LEN_MASK 0x000003ff + +/* IMASK - interrupt mask register */ +#define IMASK_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event mask */ +#define IMASK_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion mask */ +#define IMASK_REM_FAULT 0x00004000 /* remote fault mask */ +#define IMASK_LOC_FAULT 0x00002000 /* local fault mask */ +#define IMASK_TX_ECC_ER 0x00001000 /* Tx frame ECC error mask */ +#define IMASK_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow mask */ +#define IMASK_TX_ER 0x00000200 /* Tx frame error mask */ +#define IMASK_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow mask */ +#define IMASK_RX_ECC_ER 0x00000080 /* Rx frame ECC error mask */ +#define IMASK_RX_JAB_FRM 0x00000040 /* Rx jabber frame mask */ +#define IMASK_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame mask */ +#define IMASK_RX_RUNT_FRM 0x00000010 /* Rx runt frame mask */ +#define IMASK_RX_FRAG_FRM 0x00000008 /* Rx fragment frame mask */ +#define IMASK_RX_LEN_ER 0x00000004 /* Rx payload length error mask */ +#define IMASK_RX_CRC_ER 0x00000002 /* Rx CRC error mask */ +#define IMASK_RX_ALIGN_ER 0x00000001 /* Rx alignment error mask */ + +#define IMASK_MASK_ALL 0x00000000 + +/* IEVENT - interrupt event register */ +#define IEVENT_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event */ +#define IEVENT_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion */ +#define IEVENT_REM_FAULT 0x00004000 /* remote fault */ +#define IEVENT_LOC_FAULT 0x00002000 /* local fault */ +#define IEVENT_TX_ECC_ER 0x00001000 /* Tx frame ECC error */ +#define IEVENT_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow */ +#define IEVENT_TX_ER 0x00000200 /* Tx frame error */ +#define IEVENT_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow */ +#define IEVENT_RX_ECC_ER 0x00000080 /* Rx frame ECC error */ +#define IEVENT_RX_JAB_FRM 0x00000040 /* Rx jabber frame */ +#define IEVENT_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame */ +#define IEVENT_RX_RUNT_FRM 0x00000010 /* Rx runt frame */ +#define IEVENT_RX_FRAG_FRM 0x00000008 /* Rx fragment frame */ +#define IEVENT_RX_LEN_ER 0x00000004 /* Rx payload length error */ +#define IEVENT_RX_CRC_ER 0x00000002 /* Rx CRC error */ +#define IEVENT_RX_ALIGN_ER 0x00000001 /* Rx alignment error */ + +#define IEVENT_CLEAR_ALL 0xffffffff + +struct tgec_mdio_controller { + u32 res0[0xc]; + u32 mdio_stat; /* MDIO configuration and status */ + u32 mdio_ctl; /* MDIO control */ + u32 mdio_data; /* MDIO data */ + u32 mdio_addr; /* MDIO address */ +}; + +#define MDIO_STAT_CLKDIV(x) (((x>>1) & 0xff) << 8) +#define MDIO_STAT_BSY (1 << 0) +#define MDIO_STAT_RD_ER (1 << 1) +#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f) +#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5) +#define MDIO_CTL_PRE_DIS (1 << 10) +#define MDIO_CTL_SCAN_EN (1 << 11) +#define MDIO_CTL_POST_INC (1 << 14) +#define MDIO_CTL_READ (1 << 15) + +#define MDIO_DATA(x) (x & 0xffff) +#define MDIO_DATA_BSY (1 << 31) + +struct fsl_enet_mac; + +void init_tgec(struct fsl_enet_mac *mac, void *base, void *phyregs, + int max_rx_len); + +#endif diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index cc0293a..8d4c9cb 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2009 Freescale Semiconductor, Inc. + * Copyright 2004-2011 Freescale Semiconductor, Inc. * * MPC83xx Internal Memory Map * @@ -285,6 +285,105 @@ typedef struct qesba83xx { /* * DDR Memory Controller Memory Map */ +#if defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3) +typedef struct ccsr_ddr { + u32 cs0_bnds; /* Chip Select 0 Memory Bounds */ + u8 res1[4]; + u32 cs1_bnds; /* Chip Select 1 Memory Bounds */ + u8 res2[4]; + u32 cs2_bnds; /* Chip Select 2 Memory Bounds */ + u8 res3[4]; + u32 cs3_bnds; /* Chip Select 3 Memory Bounds */ + u8 res4[100]; + u32 cs0_config; /* Chip Select Configuration */ + u32 cs1_config; /* Chip Select Configuration */ + u32 cs2_config; /* Chip Select Configuration */ + u32 cs3_config; /* Chip Select Configuration */ + u8 res4a[48]; + u32 cs0_config_2; /* Chip Select Configuration 2 */ + u32 cs1_config_2; /* Chip Select Configuration 2 */ + u32 cs2_config_2; /* Chip Select Configuration 2 */ + u32 cs3_config_2; /* Chip Select Configuration 2 */ + u8 res5[48]; + u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */ + u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */ + u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ + u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ + u32 sdram_cfg; /* SDRAM Control Configuration */ + u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */ + u32 sdram_mode; /* SDRAM Mode Configuration */ + u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */ + u32 sdram_md_cntl; /* SDRAM Mode Control */ + u32 sdram_interval; /* SDRAM Interval Configuration */ + u32 sdram_data_init; /* SDRAM Data initialization */ + u8 res6[4]; + u32 sdram_clk_cntl; /* SDRAM Clock Control */ + u8 res7[20]; + u32 init_addr; /* training init addr */ + u32 init_ext_addr; /* training init extended addr */ + u8 res8_1[16]; + u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */ + u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */ + u8 reg8_1a[8]; + u32 ddr_zq_cntl; /* ZQ calibration control*/ + u32 ddr_wrlvl_cntl; /* write leveling control*/ + u8 reg8_1aa[4]; + u32 ddr_sr_cntr; /* self refresh counter */ + u32 ddr_sdram_rcw_1; /* Control Words 1 */ + u32 ddr_sdram_rcw_2; /* Control Words 2 */ + u8 reg_1ab[8]; + u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */ + u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */ + u8 res8_1b[104]; + u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */ + u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */ + u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */ + u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */ + u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */ + u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */ + u8 res8_1ba[0x908]; + u32 ddr_dsr1; /* Debug Status 1 */ + u32 ddr_dsr2; /* Debug Status 2 */ + u32 ddr_cdr1; /* Control Driver 1 */ + u32 ddr_cdr2; /* Control Driver 2 */ + u8 res8_1c[200]; + u32 ip_rev1; /* IP Block Revision 1 */ + u32 ip_rev2; /* IP Block Revision 2 */ + u32 eor; /* Enhanced Optimization Register */ + u8 res8_2[252]; + u32 mtcr; /* Memory Test Control Register */ + u8 res8_3[28]; + u32 mtp1; /* Memory Test Pattern 1 */ + u32 mtp2; /* Memory Test Pattern 2 */ + u32 mtp3; /* Memory Test Pattern 3 */ + u32 mtp4; /* Memory Test Pattern 4 */ + u32 mtp5; /* Memory Test Pattern 5 */ + u32 mtp6; /* Memory Test Pattern 6 */ + u32 mtp7; /* Memory Test Pattern 7 */ + u32 mtp8; /* Memory Test Pattern 8 */ + u32 mtp9; /* Memory Test Pattern 9 */ + u32 mtp10; /* Memory Test Pattern 10 */ + u8 res8_4[184]; + u32 data_err_inject_hi; /* Data Path Err Injection Mask High */ + u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */ + u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */ + u8 res9[20]; + u32 capture_data_hi; /* Data Path Read Capture High */ + u32 capture_data_lo; /* Data Path Read Capture Low */ + u32 capture_ecc; /* Data Path Read Capture ECC */ + u8 res10[20]; + u32 err_detect; /* Error Detect */ + u32 err_disable; /* Error Disable */ + u32 err_int_en; + u32 capture_attributes; /* Error Attrs Capture */ + u32 capture_address; /* Error Addr Capture */ + u32 capture_ext_address; /* Error Extended Addr Capture */ + u32 err_sbe; /* Single-Bit ECC Error Management */ + u8 res11[164]; + u32 debug[32]; /* debug_1 to debug_32 */ + u8 res12[128]; +} ccsr_ddr_t; +#else typedef struct ddr_cs_bnds { u32 csbnds; u8 res0[4]; @@ -334,6 +433,7 @@ typedef struct ddr83xx { u32 debug_reg; u8 res9[0xFC]; } ddr83xx_t; +#endif /* * DUART @@ -641,7 +741,11 @@ typedef struct immap { u8 dll_ddr[0x100]; u8 dll_lbc[0x100]; u8 res1[0xE00]; - ddr83xx_t ddr; /* DDR Memory Controller Memory */ +#if defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3) + ccsr_ddr_t ddr; /* DDR Memory Controller Memory */ +#else + ddr83xx_t ddr; /* DDR Memory Controller Memory */ +#endif fsl_i2c_t i2c[2]; /* I2C Controllers */ u8 res2[0x1300]; duart83xx_t duart[2]; /* DUART */ @@ -869,10 +973,15 @@ typedef struct immap { } immap_t; #endif +#define CONFIG_SYS_MPC83xx_DDR_OFFSET (0x2000) +#define CONFIG_SYS_MPC83xx_DDR_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DDR_OFFSET) #define CONFIG_SYS_MPC83xx_DMA_OFFSET (0x8000) -#define CONFIG_SYS_MPC83xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET) +#define CONFIG_SYS_MPC83xx_DMA_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET) #define CONFIG_SYS_MPC83xx_ESDHC_OFFSET (0x2e000) -#define CONFIG_SYS_MPC83xx_ESDHC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET) +#define CONFIG_SYS_MPC83xx_ESDHC_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET) #ifndef CONFIG_SYS_MPC83xx_USB_OFFSET #define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000 diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 6aaade0..fb5ef91 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1700,12 +1700,34 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000 #define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000 #define FSL_CORENET_RCWSR11_EC1 0x00c00000 /* bits 360..361 */ -#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1 0x00000000 -#define FSL_CORENET_RCWSR11_EC1_FM1_USB1 0x00800000 +#if defined(CONFIG_PPC_P4080) || defined(CONFIG_PPC_P3060) +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1 0x00000000 +#define FSL_CORENET_RCWSR11_EC1_FM1_USB1 0x00800000 #define FSL_CORENET_RCWSR11_EC2 0x001c0000 /* bits 363..365 */ -#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1 0x00000000 -#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2 0x00080000 -#define FSL_CORENET_RCWSR11_EC2_USB2 0x00100000 +#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1 0x00000000 +#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2 0x00080000 +#define FSL_CORENET_RCWSR11_EC2_USB2 0x00100000 +#endif +#if defined(CONFIG_PPC_P3060) +#define FSL_CORENET_RCWSR13_EC1_EXT 0x1c000000 +#define FSL_CORENET_RCWSR13_EC1_EXT_FM1_DTSEC4_RGMII 0x04000000 +#define FSL_CORENET_RCWSR13_EC1_EXT_FM1_DTSEC4_MII 0x08000000 +#define FSL_CORENET_RCWSR13_EC2_EXT 0x01c00000 +#define FSL_CORENET_RCWSR13_EC2_EXT_FM2_DTSEC4_RGMII 0x00400000 +#define FSL_CORENET_RCWSR13_EC2_EXT_FM2_DTSEC4_MII 0x00800000 +#define FSL_CORENET_RCWSR13_EC3 0x00380000 +#define FSL_CORENET_RCWSR13_EC3_FM2_DTSEC4_MII 0x00100000 +#endif +#if defined(CONFIG_PPC_P2040) || defined(CONFIG_PPC_P2041) \ + || defined(CONFIG_PPC_P3041) || defined(CONFIG_PPC_P5020) +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_RGMII 0x00000000 +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_MII 0x00800000 +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_NONE 0x00c00000 +#define FSL_CORENET_RCWSR11_EC2 0x00180000 /* bits 363..364 */ +#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII 0x00100000 +#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE 0x00180000 +#endif u8 res18[192]; u32 scratchrw[4]; /* Scratch Read/Write */ u8 res19[240]; @@ -1873,6 +1895,7 @@ typedef struct ccsr_gur { #if defined(CONFIG_P1017) || defined(CONFIG_P1023) #define MPC85xx_PORDEVSR_SGMII1_DIS 0x10000000 #define MPC85xx_PORDEVSR_SGMII2_DIS 0x08000000 +#define MPC85xx_PORDEVSR_TSEC1_PRTC 0x02000000 #else #define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000 #define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000 @@ -1971,6 +1994,9 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR_CAN2_TDM 0x00000002 #define MPC85xx_PMUXCR_CAN2_RES 0x00000003 #endif +#if defined(CONFIG_P1017) || defined(CONFIG_P1023) +#define MPC85xx_PMUXCR_TSEC1_1 0x10000000 +#else #define MPC85xx_PMUXCR_SD_DATA 0x80000000 #define MPC85xx_PMUXCR_SDHC_CD 0x40000000 #define MPC85xx_PMUXCR_SDHC_WP 0x20000000 @@ -1989,6 +2015,7 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR_QE10 0x00000020 #define MPC85xx_PMUXCR_QE11 0x00000010 #define MPC85xx_PMUXCR_QE12 0x00000008 +#endif #if defined(CONFIG_P1013) || defined(CONFIG_P1022) #define MPC85xx_PMUXCR_TDM_MASK 0x0001cc00 #define MPC85xx_PMUXCR_TDM 0x00014800 @@ -2301,6 +2328,22 @@ typedef struct ccsr_usb_phy { } ccsr_usb_phy_t; #define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 +#ifdef CONFIG_SYS_FSL_RAID_ENGINE +struct ccsr_raide { + u8 res0[0x543]; + u32 liodnbr; /* LIODN Base Register */ + u8 res1[0xab8]; + struct { + struct { + u32 cfg0; /* cfg register 0 */ + u32 cfg1; /* cfg register 1 */ + u8 res1[0x3f8]; + } ring[2]; + u8 res[0x800]; + } jq[2]; +}; +#endif + #ifdef CONFIG_FSL_CORENET #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000 @@ -2331,6 +2374,7 @@ typedef struct ccsr_usb_phy { #define CONFIG_SYS_FSL_CORENET_PME_OFFSET 0x316000 #define CONFIG_SYS_FSL_QMAN_OFFSET 0x318000 #define CONFIG_SYS_FSL_BMAN_OFFSET 0x31a000 +#define CONFIG_SYS_FSL_RAID_ENGINE_OFFSET 0x320000 #define CONFIG_SYS_FSL_FM1_OFFSET 0x400000 #define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET 0x488000 #define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET 0x489000 @@ -2379,6 +2423,8 @@ typedef struct ccsr_usb_phy { #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000 #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 +#define CONFIG_SYS_SNVS_OFFSET 0xE6000 +#define CONFIG_SYS_SFP_OFFSET 0xE7000 #define CONFIG_SYS_MPC85xx_CPM_OFFSET 0x80000 #define CONFIG_SYS_FSL_QMAN_OFFSET 0x88000 #define CONFIG_SYS_FSL_BMAN_OFFSET 0x8a000 @@ -2399,6 +2445,8 @@ typedef struct ccsr_usb_phy { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_BMAN_OFFSET) #define CONFIG_SYS_FSL_CORENET_PME_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_PME_OFFSET) +#define CONFIG_SYS_FSL_RAID_ENGINE_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_RAID_ENGINE_OFFSET) #define CONFIG_SYS_MPC85xx_GUTS_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET) #define CONFIG_SYS_FSL_CORENET_CCM_ADDR \ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 0c4cc25..1b96b84 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1022,7 +1022,11 @@ #define SVR_FAM(svr) (((svr) >> 20) & 0xFFF) /* Family field */ #define SVR_MEM(svr) (((svr) >> 16) & 0xF) /* Member field */ +#ifdef CONFIG_MPC8536 +#define SVR_MAJ(svr) (((svr) >> 4) & 0x7) /* Major revision field*/ +#else #define SVR_MAJ(svr) (((svr) >> 4) & 0xF) /* Major revision field*/ +#endif #define SVR_MIN(svr) (((svr) >> 0) & 0xF) /* Minor revision field*/ /* Some parts define SVR[0:23] as the SOC version */ @@ -1111,6 +1115,8 @@ #define SVR_P2041_E 0x821801 #define SVR_P3041 0x821103 #define SVR_P3041_E 0x821903 +#define SVR_P3060 0x820002 +#define SVR_P3060_E 0x820802 #define SVR_P4040 0x820100 #define SVR_P4040_E 0x820900 #define SVR_P4080 0x820000 @@ -1176,13 +1182,17 @@ struct cpu_type { char name[15]; u32 soc_ver; u32 num_cores; + u32 mask; /* which cpu(s) actually exist */ }; struct cpu_type *identify_cpu(u32 ver); #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) #define CPU_TYPE_ENTRY(n, v, nc) \ - { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), } + { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), \ + .mask = (1 << (nc)) - 1 } +#define CPU_TYPE_ENTRY_MASK(n, v, nc, m) \ + { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), .mask = (m) } #else #if defined(CONFIG_MPC83xx) #define CPU_TYPE_ENTRY(x) {#x, SPR_##x} |