ARM: AM33xx: Move s_init to a common place

s_init has the same outline for all the AM33xx based
board. So making it generic.
This also helps in addition of new Soc with minimal changes.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>

4 files changed, 72 insertions, 10 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 64a3af7..2ea3d69 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -137,7 +137,7 @@ int arch_misc_init(void)
 }
 
 #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
-void rtc32k_enable(void)
+static void rtc32k_enable(void)
 {
 	struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
 
@@ -153,11 +153,7 @@ void rtc32k_enable(void)
 	writel((1 << 3) | (1 << 6), &rtc->osc);
 }
 
-#define UART_RESET		(0x1 << 1)
-#define UART_CLK_RUNNING_MASK	0x1
-#define UART_SMART_IDLE_EN	(0x1 << 0x3)
-
-void uart_soft_reset(void)
+static void uart_soft_reset(void)
 {
 	struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
 	u32 regval;
@@ -174,4 +170,58 @@ void uart_soft_reset(void)
 	regval |= UART_SMART_IDLE_EN;
 	writel(regval, &uart_base->uartsyscfg);
 }
+
+static void watchdog_disable(void)
+{
+	struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+
+	writel(0xAAAA, &wdtimer->wdtwspr);
+	while (readl(&wdtimer->wdtwwps) != 0x0)
+		;
+	writel(0x5555, &wdtimer->wdtwspr);
+	while (readl(&wdtimer->wdtwwps) != 0x0)
+		;
+}
 #endif
+
+void s_init(void)
+{
+	/*
+	 * The ROM will only have set up sufficient pinmux to allow for the
+	 * first 4KiB NOR to be read, we must finish doing what we know of
+	 * the NOR mux in this space in order to continue.
+	 */
+#ifdef CONFIG_NOR_BOOT
+	enable_norboot_pin_mux();
+#endif
+	/*
+	 * Save the boot parameters passed from romcode.
+	 * We cannot delay the saving further than this,
+	 * to prevent overwrites.
+	 */
+#ifdef CONFIG_SPL_BUILD
+	save_omap_boot_params();
+#endif
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+	watchdog_disable();
+	timer_init();
+	set_uart_mux_conf();
+	setup_clocks_for_console();
+	uart_soft_reset();
+#endif
+#ifdef CONFIG_NOR_BOOT
+	gd->baudrate = CONFIG_BAUDRATE;
+	serial_init();
+	gd->have_console = 1;
+#else
+	gd = &gdata;
+	preloader_console_init();
+#endif
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+	prcm_init();
+	set_mux_conf_regs();
+	/* Enable RTC32K clock */
+	rtc32k_enable();
+	sdram_init();
+#endif
+}
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
index 965e875..93c7f7b 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
@@ -277,6 +277,12 @@ static void enable_per_clocks(void)
 	writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl);
 	while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0)
 		;
+
+	/* RTC clocks */
+	writel(PRCM_MOD_EN, &cmalwon->rtcclkstctrl);
+	writel(PRCM_MOD_EN, &cmalwon->rtcclkctrl);
+	while (readl(&cmalwon->rtcclkctrl) != PRCM_MOD_EN)
+		;
 }
 
 /*
diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
index 80e1899..140379f 100644
--- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
@@ -16,8 +16,10 @@
 #define CONFIG_SYS_MPUCLK	550
 #endif
 
-extern void pll_init(void);
-extern void enable_emif_clocks(void);
+#define UART_RESET		(0x1 << 1)
+#define UART_CLK_RUNNING_MASK	0x1
+#define UART_SMART_IDLE_EN	(0x1 << 0x3)
+
 extern void enable_dmm_clocks(void);
 
 #endif	/* endif _CLOCKS_AM33XX_H_ */
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index dbcede0..c6070a3 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -35,7 +35,11 @@ void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
 			u32 size);
 void omap_nand_switch_ecc(uint32_t, uint32_t);
 
-void rtc32k_enable(void);
-void uart_soft_reset(void);
+void set_uart_mux_conf(void);
+void set_mux_conf_regs(void);
+void sdram_init(void);
 u32 wait_on_value(u32, u32, void *, u32);
+#ifdef CONFIG_NOR_BOOT
+void enable_norboot_pin_mux(void);
+#endif
 #endif