summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2012-07-08 19:26:33 +0200
committerWolfgang Denk <wd@denx.de>2012-07-08 19:26:33 +0200
commit50cd93b25033764dcda9bb47aa68be778f94d36e (patch)
treeb8606a377b805952d533300dfa1e98e42951678e /arch
parent8246ff864de38935ff34108856a37a2caf6cbefc (diff)
parentd702b0811df53a1fc2d8049e35431e4591d093c6 (diff)
downloadu-boot-imx-50cd93b25033764dcda9bb47aa68be778f94d36e.zip
u-boot-imx-50cd93b25033764dcda9bb47aa68be778f94d36e.tar.gz
u-boot-imx-50cd93b25033764dcda9bb47aa68be778f94d36e.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: (212 commits) ARM: cache: Move the cp15 CR register read before flushing the cache. ARM: introduce arch_early_init_r() PXA: Enable CONFIG_PREBOOT on zipitz2 ARM: mx28: Remove CONFIG_ARCH_CPU_INIT No need to define CONFIG_ARCH_CPU_INIT. add new board vl_ma2sc MTD: SPEAr SMI: Add write support for length < 4 bytes i2c: designware_i2c.c: Add support for the "i2c probe" command rtc/m41t62: Add support for M41T82 with HT (Halt Update) SPL: ARM: spear: Add SPL support for SPEAr600 platform Makefile: Add u-boot.spr build target (SPEAr) SPL: ARM: spear: Remove some objects from SPL build SPL: lib/Makefile: Add crc32.c to SPL build SPL: common/Makefile: Add image.c to SPL build arm: Don't use printf() in SPL builds GPIO: Add SPEAr GPIO driver net: Multiple updates/enhancements to designware.c cleanup/SPEAr: Define configuration flags more elegantly cleanup/SPEAr: Remove unnecessary parenthesis SPEAr: Correct SoC ID offset in misc configuration space SPEAr: explicitly select clk src for UART SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION SPEAr: Enable dcache for fast file transfer SPEAr: Enable autoneg for ethernet SPEAr: Enable udc and usb-console support only for usbtty configuration SPEAr: Enable usb device high speed support SPEAr: Initialize SNOR in early_board_init_f SPEAr: Change the default environment variables SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK) SPEAr: Add configuration options for spear3xx and spear6xx boards SPEAr: Add basic arch related support for SPEAr SoCs SPEAr: Add interface information in initialization SPEAr: Add macb driver support for spear310 and spear320 SPEAr: Configure network support for spear SoCs SPEAr: Place ethaddr write and read within CONFIG_CMD_NET SPEAr: Eliminate dependency on Xloader table SPEAr: Fix ARM relocation support st_smi: Fixed page size for Winbond W25Q128FV flash st_smi: Change timeout loop implementation st_smi: Fix bug in flash_print_info() st_smi: Change the flash probing method st_smi: Removed no needed dependency on ST_M25Pxx_ID st_smi: Fix smi read status st_smi: Move status register read before modifying ctrl register st_smi: Read status until timeout happens st_smi: Enhance the error handling st_smi: Change SMI timeout values st_smi: Return error in case TFF is not set st_smi: Add support for SPEAr SMI driver mtd/NAND: Remove obsolete SPEAr specific NAND drivers SPEAr: Configure FSMC driver for NAND interface mtd/NAND: Add FSMC driver support arm/km: remove calls to kw_gpio_* in board_early_init_f arm/km: add implementation for read_dip_switch arm/km: support the 2 PCIe fpga resets arm/km: skip FPGA config when already configured arm/km: redefine piggy 4 reg names to avoid conflicts arm/km: cleanup km_kirkwood boards arm/km: enable BOCO2 FPGA download support arm/km: remove portl2.h and use km_kirkwood instead arm/km: convert mgcoge3un target to km_kirkwood arm/km: add kmcoge5un board support arm/km: add kmnusa board support arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0 cm-t35: fix incorrect NAND_ECC layout selection ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls. ARM: OMAP4/5: Move USB pads to essential list. ARM: OMAP4/5: Move USB clocks to essential group. ARM: OMAP4/5: Move gpmc clocks to essential group. ARM: OMAP4+: Move external phy initialisations to arch specific place. omap4: Use a smaller M,N couple for IVA DPLL da850/omap-l138: Enable auto negotiation in RMII mode omap: am33xx: accomodate input clocks other than 24 Mhz omap: emif: fix bug in manufacturer code test omap: emif: deal with rams that return duplicate mr data on all byte lanes OMAP4+: Force DDR in self-refresh after warm reset OMAP4+: Handle sdram init after warm reset ARM: OMAP3+: Detect reset type arm: bugfix: Move vector table before jumping relocated code Kirkwood: Add support for Ka-Ro TK71 arm/km: use spi claim bus to switch between SPI and NAND arm/kirkwood: protect the ENV_SPI #defines ARM: don't probe PHY address for LaCie boards lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2 lacie_kw: fix SDRAM banks number for net2big_v2 Kirkwood: add lschlv2 and lsxhl board support net: add helper to generate random mac address net: use common rand()/srand() functions lib: add rand() function kwboot: boot kirkwood SoCs over a serial link kw_spi: add weak functions board_spi_claim/release_bus kw_spi: support spi_claim/release_bus functions kw_spi: backup and reset the MPP of the chosen CS pin kirkwood: fix calls to kirkwood_mpp_conf kirkwood: add save functionality kirkwood_mpp_conf function km_arm: use filesize for erase in update command arm/km: enable mii cmd arm/km: remove CONFIG_RESET_PHY_R arm/km: change maintainer for mgcoge3un arm/km: fix wrong comment in SDRAM config for mgcoge3un arm/km: use ARRAY_SIZE macro arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE arm/km: add piggy mac adress offset for mgcoge3un arm/km: add board type to boards.cfg AT91SAM9*: Change kernel address in dataflash to match u-boot's size ATMEL/PIO: Enable new feature of PIO on Atmel device ehci-atmel: fix compiler warning AT91: at91sam9m10g45ek : Enable EHCI instead OHCI Atmel : usb : add EHCI driver for Atmel SoC Fix: AT91SAM9263 nor flash usage Fix: broken boot message at serial line on AT91SAM9263-EK board i.MX6 USDHC: Use the ESDHC clock mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register i.MX28: Add function to adjust memory parameters mx28evk: Fix PSWITCH key position mx53smd: Remove CONFIG_SYS_I2C_SLAVE definition mx53loco: Remove CONFIG_SYS_I2C_SLAVE definition mx53evk: Remove CONFIG_SYS_I2C_SLAVE definition mx53ard: Remove CONFIG_SYS_I2C_SLAVE definition mx35pdk: Remove CONFIG_SYS_I2C_SLAVE definition imx31_phycore: Remove CONFIG_SYS_I2C_SLAVE definition mx53ard: Remove unused CONFIG_MII_GASKET mx6: Avoid writing to read-only bits in imximage.cfg m28evk: use same notation to alloc the 128kB stack ... Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S7
-rw-r--r--arch/arm/cpu/arm926ejs/kirkwood/mpp.c10
-rw-r--r--arch/arm/cpu/arm926ejs/mx28/mx28.c2
-rw-r--r--arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c8
-rw-r--r--arch/arm/cpu/arm926ejs/spear/Makefile25
-rw-r--r--arch/arm/cpu/arm926ejs/spear/cpu.c87
-rw-r--r--arch/arm/cpu/arm926ejs/spear/spear600.c236
-rw-r--r--arch/arm/cpu/arm926ejs/spear/spl.c282
-rw-r--r--arch/arm/cpu/arm926ejs/spear/spl_boot.c197
-rw-r--r--arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c130
-rw-r--r--arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c135
-rw-r--r--arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c130
-rw-r--r--arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c144
-rw-r--r--arch/arm/cpu/arm926ejs/spear/start.S122
-rw-r--r--arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds87
-rw-r--r--arch/arm/cpu/armv7/am33xx/board.c30
-rw-r--r--arch/arm/cpu/armv7/cpu.c8
-rw-r--r--arch/arm/cpu/armv7/exynos/Makefile2
-rw-r--r--arch/arm/cpu/armv7/exynos/pinmux.c220
-rw-r--r--arch/arm/cpu/armv7/imx-common/speed.c4
-rw-r--r--arch/arm/cpu/armv7/mx5/clock.c2
-rw-r--r--arch/arm/cpu/armv7/mx6/soc.c2
-rw-r--r--arch/arm/cpu/armv7/omap-common/clocks-common.c8
-rw-r--r--arch/arm/cpu/armv7/omap-common/emif-common.c189
-rw-r--r--arch/arm/cpu/armv7/omap-common/hwinit-common.c24
-rw-r--r--arch/arm/cpu/armv7/omap-common/reset.c5
-rw-r--r--arch/arm/cpu/armv7/omap4/clocks.c14
-rw-r--r--arch/arm/cpu/armv7/omap4/hwinit.c5
-rw-r--r--arch/arm/cpu/armv7/omap4/sdram_elpida.c2
-rw-r--r--arch/arm/cpu/armv7/omap5/clocks.c39
-rw-r--r--arch/arm/cpu/armv7/omap5/hwinit.c123
-rw-r--r--arch/arm/cpu/armv7/omap5/sdram.c87
-rw-r--r--arch/arm/cpu/armv7/s5p-common/cpu_info.c5
-rw-r--r--arch/arm/cpu/armv7/start.S12
-rw-r--r--arch/arm/cpu/armv7/tegra2/ap20.c28
-rw-r--r--arch/arm/cpu/armv7/tegra2/board.c18
-rw-r--r--arch/arm/cpu/armv7/tegra2/clock.c4
-rw-r--r--arch/arm/cpu/armv7/tegra2/config.mk7
-rw-r--r--arch/arm/cpu/armv7/tegra2/funcmux.c30
-rw-r--r--arch/arm/include/asm/arch-am33xx/clocks_am33xx.h10
-rw-r--r--arch/arm/include/asm/arch-am33xx/cpu.h44
-rw-r--r--arch/arm/include/asm/arch-am33xx/i2c.h8
-rw-r--r--arch/arm/include/asm/arch-at91/at91_pio.h45
-rw-r--r--arch/arm/include/asm/arch-exynos/cpu.h42
-rw-r--r--arch/arm/include/asm/arch-exynos/periph.h47
-rw-r--r--arch/arm/include/asm/arch-exynos/pinmux.h58
-rw-r--r--arch/arm/include/asm/arch-kirkwood/config.h12
-rw-r--r--arch/arm/include/asm/arch-kirkwood/mpp.h2
-rw-r--r--arch/arm/include/asm/arch-kirkwood/spi.h11
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-common.h2
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6x_pins.h4
-rw-r--r--arch/arm/include/asm/arch-omap3/cpu.h2
-rw-r--r--arch/arm/include/asm/arch-omap3/sys_proto.h1
-rw-r--r--arch/arm/include/asm/arch-omap4/clocks.h5
-rw-r--r--arch/arm/include/asm/arch-omap4/cpu.h2
-rw-r--r--arch/arm/include/asm/arch-omap4/omap.h2
-rw-r--r--arch/arm/include/asm/arch-omap4/sys_proto.h2
-rw-r--r--arch/arm/include/asm/arch-omap5/clocks.h15
-rw-r--r--arch/arm/include/asm/arch-omap5/cpu.h2
-rw-r--r--arch/arm/include/asm/arch-omap5/omap.h20
-rw-r--r--arch/arm/include/asm/arch-omap5/sys_proto.h2
-rw-r--r--arch/arm/include/asm/arch-s5pc1xx/cpu.h6
-rw-r--r--arch/arm/include/asm/arch-spear/clk.h27
-rw-r--r--arch/arm/include/asm/arch-spear/gpio.h40
-rw-r--r--arch/arm/include/asm/arch-spear/hardware.h63
-rw-r--r--arch/arm/include/asm/arch-spear/spr_defs.h23
-rw-r--r--arch/arm/include/asm/arch-spear/spr_gpt.h4
-rw-r--r--arch/arm/include/asm/arch-spear/spr_misc.h147
-rw-r--r--arch/arm/include/asm/arch-spear/spr_nand.h57
-rw-r--r--arch/arm/include/asm/arch-spear/spr_smi.h115
-rw-r--r--arch/arm/include/asm/arch-spear/spr_ssp.h45
-rw-r--r--arch/arm/include/asm/arch-spear/spr_syscntl.h14
-rw-r--r--arch/arm/include/asm/arch-spear/spr_xloader_table.h67
-rw-r--r--arch/arm/include/asm/arch-tegra2/clock.h5
-rw-r--r--arch/arm/include/asm/arch-tegra2/funcmux.h4
-rw-r--r--arch/arm/include/asm/arch-tegra2/gpio.h7
-rw-r--r--arch/arm/include/asm/arch-tegra2/pinmux.h2
-rw-r--r--arch/arm/include/asm/arch-tegra2/tegra2.h4
-rw-r--r--arch/arm/include/asm/arch-tegra2/tegra_spi.h (renamed from arch/arm/include/asm/arch-tegra2/tegra2_spi.h)9
-rw-r--r--arch/arm/include/asm/arch-tegra2/uart-spi-switch.h4
-rw-r--r--arch/arm/include/asm/emif.h52
-rw-r--r--arch/arm/include/asm/omap_common.h1
-rw-r--r--arch/arm/include/asm/u-boot-arm.h1
-rw-r--r--arch/arm/lib/board.c4
-rw-r--r--arch/arm/lib/cache-cp15.c6
-rw-r--r--arch/arm/lib/eabi_compat.c3
86 files changed, 3059 insertions, 459 deletions
diff --git a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S b/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S
index 5b39484..0e45426 100644
--- a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S
+++ b/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S
@@ -523,9 +523,8 @@ VTPLock:
ldr r6, DDRVTPR
ldr r7, [r6]
- and r7, r7, $0x1f
- and r8, r7, $0x3e0
- orr r8, r7, r8
+ mov r8, r7, LSL #32-10
+ mov r8, r8, LSR #32-10 /* grab low 10 bits */
ldr r7, VTP_RECAL
orr r8, r7, r8
ldr r7, VTP_EN
@@ -644,7 +643,7 @@ VTP_LOCK_COUNT:
VTP_MASK:
.word 0xffffdfff
VTP_RECAL:
- .word 0x40000
+ .word 0x08000
VTP_EN:
.word 0x02000
CFGTEST:
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c
index 3da6c98..03eb2de 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c
@@ -31,7 +31,7 @@ static u32 kirkwood_variant(void)
#define MPP_CTRL(i) (KW_MPP_BASE + (i* 4))
#define MPP_NR_REGS (1 + MPP_MAX/8)
-void kirkwood_mpp_conf(u32 *mpp_list)
+void kirkwood_mpp_conf(u32 *mpp_list, u32 *mpp_save)
{
u32 mpp_ctrl[MPP_NR_REGS];
unsigned int variant_mask;
@@ -52,6 +52,7 @@ void kirkwood_mpp_conf(u32 *mpp_list)
while (*mpp_list) {
unsigned int num = MPP_NUM(*mpp_list);
unsigned int sel = MPP_SEL(*mpp_list);
+ unsigned int sel_save;
int shift;
if (num > MPP_MAX) {
@@ -66,6 +67,13 @@ void kirkwood_mpp_conf(u32 *mpp_list)
}
shift = (num & 7) << 2;
+
+ if (mpp_save) {
+ sel_save = (mpp_ctrl[num / 8] >> shift) & 0xf;
+ *mpp_save = num | (sel_save << 8) | variant_mask;
+ mpp_save++;
+ }
+
mpp_ctrl[num / 8] &= ~(0xf << shift);
mpp_ctrl[num / 8] |= sel << shift;
diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index a82ff25..ff25772 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -153,7 +153,6 @@ int arch_misc_init(void)
}
#endif
-#ifdef CONFIG_ARCH_CPU_INIT
int arch_cpu_init(void)
{
struct mx28_clkctrl_regs *clkctrl_regs =
@@ -187,7 +186,6 @@ int arch_cpu_init(void)
return 0;
}
-#endif
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
index 9fa5d29..e17a4d7 100644
--- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
@@ -82,10 +82,18 @@ uint32_t dram_vals[] = {
0x00000000, 0x00010001
};
+void __mx28_adjust_memory_params(uint32_t *dram_vals)
+{
+}
+void mx28_adjust_memory_params(uint32_t *dram_vals)
+ __attribute__((weak, alias("__mx28_adjust_memory_params")));
+
void init_m28_200mhz_ddr2(void)
{
int i;
+ mx28_adjust_memory_params(dram_vals);
+
for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
}
diff --git a/arch/arm/cpu/arm926ejs/spear/Makefile b/arch/arm/cpu/arm926ejs/spear/Makefile
index f32ec4c..d06f03d 100644
--- a/arch/arm/cpu/arm926ejs/spear/Makefile
+++ b/arch/arm/cpu/arm926ejs/spear/Makefile
@@ -25,16 +25,27 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS := reset.o \
+COBJS-y := cpu.o \
+ reset.o \
timer.o
-SOBJS :=
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
+ifdef CONFIG_SPL_BUILD
+COBJS-y += spl.o spl_boot.o
+COBJS-$(CONFIG_SPEAR600) += spear600.o
+COBJS-$(CONFIG_DDR_MT47H64M16) += spr600_mt47h64m16_3_333_cl5_psync.o
+COBJS-$(CONFIG_DDR_MT47H32M16) += spr600_mt47h32m16_333_cl5_psync.o
+COBJS-$(CONFIG_DDR_MT47H32M16) += spr600_mt47h32m16_37e_166_cl4_sync.o
+COBJS-$(CONFIG_DDR_MT47H128M8) += spr600_mt47h128m8_3_266_cl5_async.o
+endif
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+SRCS := $(START:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
diff --git a/arch/arm/cpu/arm926ejs/spear/cpu.c b/arch/arm/cpu/arm926ejs/spear/cpu.c
new file mode 100644
index 0000000..e299de3
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/cpu.c
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2010
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_misc.h>
+
+int arch_cpu_init(void)
+{
+ struct misc_regs *const misc_p =
+ (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ u32 periph1_clken, periph_clk_cfg;
+
+ periph1_clken = readl(&misc_p->periph1_clken);
+
+#if defined(CONFIG_SPEAR3XX)
+ periph1_clken |= MISC_GPT2ENB;
+#elif defined(CONFIG_SPEAR600)
+ periph1_clken |= MISC_GPT3ENB;
+#endif
+
+#if defined(CONFIG_PL011_SERIAL)
+ periph1_clken |= MISC_UART0ENB;
+
+ periph_clk_cfg = readl(&misc_p->periph_clk_cfg);
+ periph_clk_cfg &= ~CONFIG_SPEAR_UARTCLKMSK;
+ periph_clk_cfg |= CONFIG_SPEAR_UART48M;
+ writel(periph_clk_cfg, &misc_p->periph_clk_cfg);
+#endif
+#if defined(CONFIG_DESIGNWARE_ETH)
+ periph1_clken |= MISC_ETHENB;
+#endif
+#if defined(CONFIG_DW_UDC)
+ periph1_clken |= MISC_USBDENB;
+#endif
+#if defined(CONFIG_DW_I2C)
+ periph1_clken |= MISC_I2CENB;
+#endif
+#if defined(CONFIG_ST_SMI)
+ periph1_clken |= MISC_SMIENB;
+#endif
+#if defined(CONFIG_NAND_FSMC)
+ periph1_clken |= MISC_FSMCENB;
+#endif
+
+ writel(periph1_clken, &misc_p->periph1_clken);
+ return 0;
+}
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+#ifdef CONFIG_SPEAR300
+ printf("CPU: SPEAr300\n");
+#elif defined(CONFIG_SPEAR310)
+ printf("CPU: SPEAr310\n");
+#elif defined(CONFIG_SPEAR320)
+ printf("CPU: SPEAr320\n");
+#elif defined(CONFIG_SPEAR600)
+ printf("CPU: SPEAr600\n");
+#else
+#error CPU not supported in spear platform
+#endif
+ return 0;
+}
+#endif
diff --git a/arch/arm/cpu/arm926ejs/spear/spear600.c b/arch/arm/cpu/arm926ejs/spear/spear600.c
new file mode 100644
index 0000000..ff52131
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/spear600.c
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2000-2009
+ * Viresh Kumar, ST Microelectronics, viresh.kumar@st.com
+ * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/arch/spr_misc.h>
+#include <asm/arch/spr_defs.h>
+
+#define FALSE 0
+#define TRUE (!FALSE)
+
+static void sel_1v8(void)
+{
+ struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ u32 ddr1v8, ddr2v5;
+
+ ddr2v5 = readl(&misc_p->ddr_2v5_compensation);
+ ddr2v5 &= 0x8080ffc0;
+ ddr2v5 |= 0x78000003;
+ writel(ddr2v5, &misc_p->ddr_2v5_compensation);
+
+ ddr1v8 = readl(&misc_p->ddr_1v8_compensation);
+ ddr1v8 &= 0x8080ffc0;
+ ddr1v8 |= 0x78000010;
+ writel(ddr1v8, &misc_p->ddr_1v8_compensation);
+
+ while (!(readl(&misc_p->ddr_1v8_compensation) & DDR_COMP_ACCURATE))
+ ;
+}
+
+static void sel_2v5(void)
+{
+ struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ u32 ddr1v8, ddr2v5;
+
+ ddr1v8 = readl(&misc_p->ddr_1v8_compensation);
+ ddr1v8 &= 0x8080ffc0;
+ ddr1v8 |= 0x78000003;
+ writel(ddr1v8, &misc_p->ddr_1v8_compensation);
+
+ ddr2v5 = readl(&misc_p->ddr_2v5_compensation);
+ ddr2v5 &= 0x8080ffc0;
+ ddr2v5 |= 0x78000010;
+ writel(ddr2v5, &misc_p->ddr_2v5_compensation);
+
+ while (!(readl(&misc_p->ddr_2v5_compensation) & DDR_COMP_ACCURATE))
+ ;
+}
+
+/*
+ * plat_ddr_init:
+ */
+void plat_ddr_init(void)
+{
+ struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ u32 ddrpad;
+ u32 core3v3, ddr1v8, ddr2v5;
+
+ /* DDR pad register configurations */
+ ddrpad = readl(&misc_p->ddr_pad);
+ ddrpad &= ~DDR_PAD_CNF_MSK;
+
+#if (CONFIG_DDR_HCLK)
+ ddrpad |= 0xEAAB;
+#elif (CONFIG_DDR_2HCLK)
+ ddrpad |= 0xEAAD;
+#elif (CONFIG_DDR_PLL2)
+ ddrpad |= 0xEAAD;
+#endif
+ writel(ddrpad, &misc_p->ddr_pad);
+
+ /* Compensation register configurations */
+ core3v3 = readl(&misc_p->core_3v3_compensation);
+ core3v3 &= 0x8080ffe0;
+ core3v3 |= 0x78000002;
+ writel(core3v3, &misc_p->core_3v3_compensation);
+
+ ddr1v8 = readl(&misc_p->ddr_1v8_compensation);
+ ddr1v8 &= 0x8080ffc0;
+ ddr1v8 |= 0x78000004;
+ writel(ddr1v8, &misc_p->ddr_1v8_compensation);
+
+ ddr2v5 = readl(&misc_p->ddr_2v5_compensation);
+ ddr2v5 &= 0x8080ffc0;
+ ddr2v5 |= 0x78000004;
+ writel(ddr2v5, &misc_p->ddr_2v5_compensation);
+
+ if ((readl(&misc_p->ddr_pad) & DDR_PAD_SW_CONF) == DDR_PAD_SW_CONF) {
+ /* Software memory configuration */
+ if (readl(&misc_p->ddr_pad) & DDR_PAD_SSTL_SEL)
+ sel_1v8();
+ else
+ sel_2v5();
+ } else {
+ /* Hardware memory configuration */
+ if (readl(&misc_p->ddr_pad) & DDR_PAD_DRAM_TYPE)
+ sel_1v8();
+ else
+ sel_2v5();
+ }
+}
+
+/*
+ * soc_init:
+ */
+void soc_init(void)
+{
+ /* Nothing to be done for SPEAr600 */
+}
+
+/*
+ * xxx_boot_selected:
+ *
+ * return TRUE if the particular booting option is selected
+ * return FALSE otherwise
+ */
+static u32 read_bootstrap(void)
+{
+ return (readl(CONFIG_SPEAR_BOOTSTRAPCFG) >> CONFIG_SPEAR_BOOTSTRAPSHFT)
+ & CONFIG_SPEAR_BOOTSTRAPMASK;
+}
+
+int snor_boot_selected(void)
+{
+ u32 bootstrap = read_bootstrap();
+
+ if (SNOR_BOOT_SUPPORTED) {
+ /* Check whether SNOR boot is selected */
+ if ((bootstrap & CONFIG_SPEAR_ONLYSNORBOOT) ==
+ CONFIG_SPEAR_ONLYSNORBOOT)
+ return TRUE;
+
+ if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
+ CONFIG_SPEAR_NORNAND8BOOT)
+ return TRUE;
+
+ if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
+ CONFIG_SPEAR_NORNAND16BOOT)
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+int nand_boot_selected(void)
+{
+ u32 bootstrap = read_bootstrap();
+
+ if (NAND_BOOT_SUPPORTED) {
+ /* Check whether NAND boot is selected */
+ if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
+ CONFIG_SPEAR_NORNAND8BOOT)
+ return TRUE;
+
+ if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
+ CONFIG_SPEAR_NORNAND16BOOT)
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+int pnor_boot_selected(void)
+{
+ /* Parallel NOR boot is not selected in any SPEAr600 revision */
+ return FALSE;
+}
+
+int usb_boot_selected(void)
+{
+ u32 bootstrap = read_bootstrap();
+
+ if (USB_BOOT_SUPPORTED) {
+ /* Check whether USB boot is selected */
+ if (!(bootstrap & CONFIG_SPEAR_USBBOOT))
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+int tftp_boot_selected(void)
+{
+ /* TFTP boot is not selected in any SPEAr600 revision */
+ return FALSE;
+}
+
+int uart_boot_selected(void)
+{
+ /* UART boot is not selected in any SPEAr600 revision */
+ return FALSE;
+}
+
+int spi_boot_selected(void)
+{
+ /* SPI boot is not selected in any SPEAr600 revision */
+ return FALSE;
+}
+
+int i2c_boot_selected(void)
+{
+ /* I2C boot is not selected in any SPEAr600 revision */
+ return FALSE;
+}
+
+int mmc_boot_selected(void)
+{
+ return FALSE;
+}
+
+void plat_late_init(void)
+{
+ spear_late_init();
+}
diff --git a/arch/arm/cpu/arm926ejs/spear/spl.c b/arch/arm/cpu/arm926ejs/spear/spl.c
new file mode 100644
index 0000000..48e6efb
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/spl.c
@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_defs.h>
+#include <asm/arch/spr_misc.h>
+#include <asm/arch/spr_syscntl.h>
+
+inline void hang(void)
+{
+ serial_puts("### ERROR ### Please RESET the board ###\n");
+ for (;;)
+ ;
+}
+
+static void ddr_clock_init(void)
+{
+ struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ u32 clkenb, ddrpll;
+
+ clkenb = readl(&misc_p->periph1_clken);
+ clkenb &= ~PERIPH_MPMCMSK;
+ clkenb |= PERIPH_MPMC_WE;
+
+ /* Intentionally done twice */
+ writel(clkenb, &misc_p->periph1_clken);
+ writel(clkenb, &misc_p->periph1_clken);
+
+ ddrpll = readl(&misc_p->pll_ctr_reg);
+ ddrpll &= ~MEM_CLK_SEL_MSK;
+#if (CONFIG_DDR_HCLK)
+ ddrpll |= MEM_CLK_HCLK;
+#elif (CONFIG_DDR_2HCLK)
+ ddrpll |= MEM_CLK_2HCLK;
+#elif (CONFIG_DDR_PLL2)
+ ddrpll |= MEM_CLK_PLL2;
+#else
+#error "please define one of CONFIG_DDR_(HCLK|2HCLK|PLL2)"
+#endif
+ writel(ddrpll, &misc_p->pll_ctr_reg);
+
+ writel(readl(&misc_p->periph1_clken) | PERIPH_MPMC_EN,
+ &misc_p->periph1_clken);
+}
+
+static void mpmc_init_values(void)
+{
+ u32 i;
+ u32 *mpmc_reg_p = (u32 *)CONFIG_SPEAR_MPMCBASE;
+ u32 *mpmc_val_p = &mpmc_conf_vals[0];
+
+ for (i = 0; i < CONFIG_SPEAR_MPMCREGS; i++, mpmc_reg_p++, mpmc_val_p++)
+ writel(*mpmc_val_p, mpmc_reg_p);
+
+ mpmc_reg_p = (u32 *)CONFIG_SPEAR_MPMCBASE;
+
+ /*
+ * MPMC controller start
+ * MPMC waiting for DLLLOCKREG high
+ */
+ writel(0x01000100, &mpmc_reg_p[7]);
+
+ while (!(readl(&mpmc_reg_p[3]) & 0x10000))
+ ;
+}
+
+static void mpmc_init(void)
+{
+ /* Clock related settings for DDR */
+ ddr_clock_init();
+
+ /*
+ * DDR pad register bits are different for different SoCs
+ * Compensation values are also handled separately
+ */
+ plat_ddr_init();
+
+ /* Initialize mpmc register values */
+ mpmc_init_values();
+}
+
+static void pll_init(void)
+{
+ struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+ /* Initialize PLLs */
+ writel(FREQ_332, &misc_p->pll1_frq);
+ writel(0x1C0A, &misc_p->pll1_cntl);
+ writel(0x1C0E, &misc_p->pll1_cntl);
+ writel(0x1C06, &misc_p->pll1_cntl);
+ writel(0x1C0E, &misc_p->pll1_cntl);
+
+ writel(FREQ_332, &misc_p->pll2_frq);
+ writel(0x1C0A, &misc_p->pll2_cntl);
+ writel(0x1C0E, &misc_p->pll2_cntl);
+ writel(0x1C06, &misc_p->pll2_cntl);
+ writel(0x1C0E, &misc_p->pll2_cntl);
+
+ /* wait for pll locks */
+ while (!(readl(&misc_p->pll1_cntl) & 0x1))
+ ;
+ while (!(readl(&misc_p->pll2_cntl) & 0x1))
+ ;
+}
+
+static void mac_init(void)
+{
+ struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+ writel(readl(&misc_p->periph1_clken) & (~PERIPH_GMAC),
+ &misc_p->periph1_clken);
+
+ writel(SYNTH23, &misc_p->gmac_synth_clk);
+
+ switch (get_socrev()) {
+ case SOC_SPEAR600_AA:
+ case SOC_SPEAR600_AB:
+ case SOC_SPEAR600_BA:
+ case SOC_SPEAR600_BB:
+ case SOC_SPEAR600_BC:
+ case SOC_SPEAR600_BD:
+ writel(0x0, &misc_p->gmac_ctr_reg);
+ break;
+
+ case SOC_SPEAR300:
+ case SOC_SPEAR310:
+ case SOC_SPEAR320:
+ writel(0x4, &misc_p->gmac_ctr_reg);
+ break;
+ }
+
+ writel(readl(&misc_p->periph1_clken) | PERIPH_GMAC,
+ &misc_p->periph1_clken);
+
+ writel(readl(&misc_p->periph1_rst) | PERIPH_GMAC,
+ &misc_p->periph1_rst);
+ writel(readl(&misc_p->periph1_rst) & (~PERIPH_GMAC),
+ &misc_p->periph1_rst);
+}
+
+static void sys_init(void)
+{
+ struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ struct syscntl_regs *syscntl_p =
+ (struct syscntl_regs *)CONFIG_SPEAR_SYSCNTLBASE;
+
+ /* Set system state to SLOW */
+ writel(SLOW, &syscntl_p->scctrl);
+ writel(PLL_TIM << 3, &syscntl_p->scpllctrl);
+
+ /* Initialize PLLs */
+ pll_init();
+
+ /*
+ * Ethernet configuration
+ * To be done only if the tftp boot is not selected already
+ * Boot code ensures the correct configuration in tftp booting
+ */
+ if (!tftp_boot_selected())
+ mac_init();
+
+ writel(RTC_DISABLE | PLLTIMEEN, &misc_p->periph_clk_cfg);
+ writel(0x555, &misc_p->amba_clk_cfg);
+
+ writel(NORMAL, &syscntl_p->scctrl);
+
+ /* Wait for system to switch to normal mode */
+ while (((readl(&syscntl_p->scctrl) >> MODE_SHIFT) & MODE_MASK)
+ != NORMAL)
+ ;
+}
+
+/*
+ * get_socrev
+ *
+ * Get SoC Revision.
+ * @return SOC_SPEARXXX
+ */
+int get_socrev(void)
+{
+#if defined(CONFIG_SPEAR600)
+ struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ u32 soc_id = readl(&misc_p->soc_core_id);
+ u32 pri_socid = (soc_id >> SOC_PRI_SHFT) & 0xFF;
+ u32 sec_socid = (soc_id >> SOC_SEC_SHFT) & 0xFF;
+
+ if ((pri_socid == 'B') && (sec_socid == 'B'))
+ return SOC_SPEAR600_BB;
+ else if ((pri_socid == 'B') && (sec_socid == 'C'))
+ return SOC_SPEAR600_BC;
+ else if ((pri_socid == 'B') && (sec_socid == 'D'))
+ return SOC_SPEAR600_BD;
+ else if (soc_id == 0)
+ return SOC_SPEAR600_BA;
+ else
+ return SOC_SPEAR_NA;
+#elif defined(CONFIG_SPEAR300)
+ return SOC_SPEAR300;
+#elif defined(CONFIG_SPEAR310)
+ return SOC_SPEAR310;
+#elif defined(CONFIG_SPEAR320)
+ return SOC_SPEAR320;
+#endif
+}
+
+void lowlevel_init(void)
+{
+ struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ const char *u_boot_rev = U_BOOT_VERSION;
+
+ /* Initialize PLLs */
+ sys_init();
+
+ /* Initialize UART */
+ serial_init();
+
+ /* Print U-Boot SPL version string */
+ serial_puts("\nU-Boot SPL ");
+ /* Avoid a second "U-Boot" coming from this string */
+ u_boot_rev = &u_boot_rev[7];
+ serial_puts(u_boot_rev);
+ serial_puts(" (");
+ serial_puts(U_BOOT_DATE);
+ serial_puts(" - ");
+ serial_puts(U_BOOT_TIME);
+ serial_puts(")\n");
+
+#if defined(CONFIG_OS_BOOT)
+ writel(readl(&misc_p->periph1_clken) | PERIPH_UART1,
+ &misc_p->periph1_clken);
+#endif
+
+ /* Enable IPs (release reset) */
+ writel(PERIPH_RST_ALL, &misc_p->periph1_rst);
+
+ /* Initialize MPMC */
+ serial_puts("Configure DDR\n");
+ mpmc_init();
+
+ /* SoC specific initialization */
+ soc_init();
+}
+
+void spear_late_init(void)
+{
+ struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+ writel(0x80000007, &misc_p->arb_icm_ml1);
+ writel(0x80000007, &misc_p->arb_icm_ml2);
+ writel(0x80000007, &misc_p->arb_icm_ml3);
+ writel(0x80000007, &misc_p->arb_icm_ml4);
+ writel(0x80000007, &misc_p->arb_icm_ml5);
+ writel(0x80000007, &misc_p->arb_icm_ml6);
+ writel(0x80000007, &misc_p->arb_icm_ml7);
+ writel(0x80000007, &misc_p->arb_icm_ml8);
+ writel(0x80000007, &misc_p->arb_icm_ml9);
+}
diff --git a/arch/arm/cpu/arm926ejs/spear/spl_boot.c b/arch/arm/cpu/arm926ejs/spear/spl_boot.c
new file mode 100644
index 0000000..f2f9a49
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/spl_boot.c
@@ -0,0 +1,197 @@
+/*
+ * (C) Copyright 2000-2009
+ * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
+ *
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <image.h>
+#include <linux/compiler.h>
+#include <asm/io.h>
+#include <asm/arch/spr_defs.h>
+#include <linux/mtd/st_smi.h>
+
+static const char kernel_name[] = "Linux";
+static const char loader_name[] = "U-Boot";
+
+int image_check_header(image_header_t *hdr, const char *name)
+{
+ if (image_check_magic(hdr) &&
+ (!strncmp(image_get_name(hdr), name, strlen(name))) &&
+ image_check_hcrc(hdr)) {
+ return 1;
+ }
+ return 0;
+}
+
+int image_check_data(image_header_t *hdr)
+{
+ if (image_check_dcrc(hdr))
+ return 1;
+
+ return 0;
+}
+
+/*
+ * SNOR (Serial NOR flash) related functions
+ */
+void snor_init(void)
+{
+ struct smi_regs *const smicntl =
+ (struct smi_regs * const)CONFIG_SYS_SMI_BASE;
+
+ /* Setting the fast mode values. SMI working at 166/4 = 41.5 MHz */
+ writel(HOLD1 | FAST_MODE | BANK_EN | DSEL_TIME | PRESCAL4,
+ &smicntl->smi_cr1);
+}
+
+static int snor_image_load(u8 *load_addr, void (**image_p)(void),
+ const char *image_name)
+{
+ image_header_t *header;
+
+ /*
+ * Since calculating the crc in the SNOR flash does not
+ * work, we copy the image to the destination address
+ * minus the header size. And point the header to this
+ * new destination. This will not work for address 0
+ * of course.
+ */
+ header = (image_header_t *)load_addr;
+ memcpy((ulong *)(image_get_load(header) - sizeof(image_header_t)),
+ (const ulong *)load_addr,
+ image_get_data_size(header) + sizeof(image_header_t));
+ header = (image_header_t *)(image_get_load(header) -
+ sizeof(image_header_t));
+
+ if (image_check_header(header, image_name)) {
+ if (image_check_data(header)) {
+ /* Jump to boot image */
+ *image_p = (void *)image_get_load(header);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static void boot_image(void (*image)(void))
+{
+ void (*funcp)(void) __noreturn = (void *)image;
+
+ (*funcp)();
+}
+
+/*
+ * spl_boot:
+ *
+ * All supported booting types of all supported SoCs are listed here.
+ * Generic readback APIs are provided for each supported booting type
+ * eg. nand_read_skip_bad
+ */
+u32 spl_boot(void)
+{
+ void (*image)(void);
+
+#ifdef CONFIG_SPEAR_USBTTY
+ plat_late_init();
+ return 1;
+#endif
+
+ /*
+ * All the supported booting devices are listed here. Each of
+ * the booting type supported by the platform would define the
+ * macro xxx_BOOT_SUPPORTED to TRUE.
+ */
+
+ if (SNOR_BOOT_SUPPORTED && snor_boot_selected()) {
+ /* SNOR-SMI initialization */
+ snor_init();
+
+ serial_puts("Booting via SNOR\n");
+ /* Serial NOR booting */
+ if (1 == snor_image_load((u8 *)CONFIG_SYS_UBOOT_BASE,
+ &image, loader_name)) {
+ /* Platform related late initialasations */
+ plat_late_init();
+
+ /* Jump to boot image */
+ serial_puts("Jumping to U-Boot\n");
+ boot_image(image);
+ return 1;
+ }
+ }
+
+ if (NAND_BOOT_SUPPORTED && nand_boot_selected()) {
+ /* NAND booting */
+ /* Not ported from XLoader to SPL yet */
+ return 0;
+ }
+
+ if (PNOR_BOOT_SUPPORTED && pnor_boot_selected()) {
+ /* PNOR booting */
+ /* Not ported from XLoader to SPL yet */
+ return 0;
+ }
+
+ if (MMC_BOOT_SUPPORTED && mmc_boot_selected()) {
+ /* MMC booting */
+ /* Not ported from XLoader to SPL yet */
+ return 0;
+ }
+
+ if (SPI_BOOT_SUPPORTED && spi_boot_selected()) {
+ /* SPI booting */
+ /* Not supported for any platform as of now */
+ return 0;
+ }
+
+ if (I2C_BOOT_SUPPORTED && i2c_boot_selected()) {
+ /* I2C booting */
+ /* Not supported for any platform as of now */
+ return 0;
+ }
+
+ /*
+ * All booting types without memory are listed as below
+ * Control has to be returned to BootROM in case of all
+ * the following booting scenarios
+ */
+
+ if (USB_BOOT_SUPPORTED && usb_boot_selected()) {
+ plat_late_init();
+ return 1;
+ }
+
+ if (TFTP_BOOT_SUPPORTED && tftp_boot_selected()) {
+ plat_late_init();
+ return 1;
+ }
+
+ if (UART_BOOT_SUPPORTED && uart_boot_selected()) {
+ plat_late_init();
+ return 1;
+ }
+
+ /* Ideally, the control should not reach here. */
+ hang();
+}
diff --git a/arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c b/arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c
new file mode 100644
index 0000000..5edc115
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c
@@ -0,0 +1,130 @@
+/*
+ * (C) Copyright 2000-2009
+ * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_DDR_PLL2)
+
+const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
+ 0x00000001,
+ 0x00000000,
+ 0x01000000,
+ 0x00000101,
+ 0x00000001,
+ 0x01000000,
+ 0x00010001,
+ 0x00000100,
+ 0x00010001,
+ 0x00000003,
+ 0x01000201,
+ 0x06000202,
+ 0x06060106,
+ 0x03050502,
+ 0x03040404,
+ 0x02020503,
+ 0x02010106,
+ 0x03000404,
+ 0x02030202,
+ 0x03000204,
+ 0x0707073f,
+ 0x07070707,
+ 0x06060607,
+ 0x06060606,
+ 0x05050506,
+ 0x05050505,
+ 0x04040405,
+ 0x04040404,
+ 0x03030304,
+ 0x03030303,
+ 0x02020203,
+ 0x02020202,
+ 0x01010102,
+ 0x01010101,
+ 0x08080a01,
+ 0x0000023f,
+ 0x00040800,
+ 0x00000000,
+ 0x00000f02,
+ 0x00001b1b,
+ 0x7f000000,
+ 0x005f0000,
+ 0x1c040b6a,
+ 0x00640064,
+ 0x00640064,
+ 0x00640064,
+ 0x00000064,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x000007ff,
+ 0x00000000,
+ 0x47ec00c8,
+ 0x00c8001f,
+ 0x00000000,
+ 0x0000cd98,
+ 0x00000000,
+ 0x03030100,
+ 0x03030303,
+ 0x03030303,
+ 0x03030303,
+ 0x00270000,
+ 0x00250027,
+ 0x00300000,
+ 0x008900b7,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000
+};
+#endif
diff --git a/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c b/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c
new file mode 100644
index 0000000..616b861
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c
@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2000-2009
+ * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_DDR_PLL2 || CONFIG_DDR_2HCLK)
+
+const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
+#if (CONFIG_DDR_PLL2)
+ 0x00000001,
+ 0x00000000,
+#elif (CONFIG_DDR_2HCLK)
+ 0x02020201,
+ 0x02020202,
+#endif
+ 0x01000000,
+ 0x00000101,
+ 0x00000101,
+ 0x01000000,
+ 0x00010001,
+ 0x00000100,
+ 0x01010001,
+ 0x00000201,
+ 0x01000101,
+ 0x06000002,
+ 0x06060106,
+ 0x03050502,
+ 0x03040404,
+ 0x02020503,
+ 0x02010106,
+ 0x03000405,
+ 0x03040202,
+ 0x04000305,
+ 0x0707073f,
+ 0x07070707,
+ 0x06060607,
+ 0x06060606,
+ 0x05050506,
+ 0x05050505,
+ 0x04040405,
+ 0x04040404,
+ 0x03030304,
+ 0x03030303,
+ 0x02020203,
+ 0x02020202,
+ 0x01010102,
+ 0x01010101,
+ 0x0a0a0a01,
+ 0x0000023f,
+ 0x00050a00,
+ 0x11000000,
+ 0x00001302,
+ 0x00000A0A,
+ 0x72000000,
+ 0x00550000,
+ 0x2b050e86,
+ 0x00640064,
+ 0x00640064,
+ 0x00640064,
+ 0x00000064,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00000a24,
+ 0x43C20000,
+ 0x5b1c00c8,
+ 0x00c8002e,
+ 0x00000000,
+ 0x0001046b,
+ 0x00000000,
+ 0x03030100,
+ 0x03030303,
+ 0x03030303,
+ 0x03030303,
+ 0x00210000,
+ 0x00010021,
+ 0x00200000,
+ 0x006c0090,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000
+};
+#endif
diff --git a/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c b/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c
new file mode 100644
index 0000000..b89f77d
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c
@@ -0,0 +1,130 @@
+/*
+ * (C) Copyright 2000-2009
+ * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_DDR_HCLK)
+
+const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
+ 0x03030301,
+ 0x03030303,
+ 0x01000000,
+ 0x00000101,
+ 0x00000001,
+ 0x01000000,
+ 0x00010001,
+ 0x00000100,
+ 0x00010001,
+ 0x00000003,
+ 0x01000201,
+ 0x06000202,
+ 0x06060106,
+ 0x03050502,
+ 0x03040404,
+ 0x02020503,
+ 0x02010106,
+ 0x03000404,
+ 0x02020202,
+ 0x03000203,
+ 0x0707073f,
+ 0x07070707,
+ 0x06060607,
+ 0x06060606,
+ 0x05050506,
+ 0x05050505,
+ 0x04040405,
+ 0x04040404,
+ 0x03030304,
+ 0x03030303,
+ 0x02020203,
+ 0x02020202,
+ 0x01010102,
+ 0x01010101,
+ 0x08080a01,
+ 0x0000023f,
+ 0x00030600,
+ 0x00000000,
+ 0x00000a02,
+ 0x00001c1c,
+ 0x7f000000,
+ 0x005f0000,
+ 0x12030743,
+ 0x00640064,
+ 0x00640064,
+ 0x00640064,
+ 0x00000064,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x0000050e,
+ 0x00000000,
+ 0x2d8900c8,
+ 0x00c80014,
+ 0x00000000,
+ 0x00008236,
+ 0x00000000,
+ 0x03030100,
+ 0x03030303,
+ 0x03030303,
+ 0x03030303,
+ 0x00400000,
+ 0x003a0040,
+ 0x00680000,
+ 0x00d80120,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000
+};
+#endif
diff --git a/arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c b/arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c
new file mode 100644
index 0000000..0c39cd1
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2000-2009
+ * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_DDR_PLL2 || CONFIG_DDR_2HCLK)
+
+const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
+#if (CONFIG_DDR_PLL2)
+ 0x00000001,
+ 0x00000000,
+#elif (CONFIG_DDR_2HCLK)
+ 0x02020201,
+ 0x02020202,
+#endif
+ 0x01000000,
+ 0x00000101,
+ 0x00000101,
+ 0x01000000,
+ 0x00010001,
+ 0x00000100,
+ 0x01010001,
+ 0x00000201,
+ 0x01000101,
+ 0x06000002,
+ 0x06060106,
+ 0x03050502,
+ 0x03040404,
+ 0x02020503,
+#ifdef CONFIG_X600
+ 0x02030206,
+#else
+ 0x02010106,
+#endif
+ 0x03000405,
+ 0x03040202,
+ 0x04000305,
+ 0x0707073f,
+ 0x07070707,
+ 0x06060607,
+ 0x06060606,
+ 0x05050506,
+ 0x05050505,
+ 0x04040405,
+ 0x04040404,
+ 0x03030304,
+ 0x03030303,
+ 0x02020203,
+ 0x02020202,
+ 0x01010102,
+ 0x01010101,
+ 0x0a0a0a01,
+ 0x0000023f,
+ 0x00050a00,
+ 0x11000000,
+ 0x00001302,
+ 0x00000A0A,
+#ifdef CONFIG_X600
+ 0x7f000000,
+ 0x005c0000,
+#else
+ 0x72000000,
+ 0x00550000,
+#endif
+ 0x2b050e86,
+ 0x00640064,
+ 0x00640064,
+ 0x00640064,
+ 0x00000064,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00200020,
+ 0x00000a24,
+ 0x43C20000,
+ 0x5b1c00c8,
+ 0x00c8002e,
+ 0x00000000,
+ 0x0001046b,
+ 0x00000000,
+ 0x03030100,
+ 0x03030303,
+ 0x03030303,
+ 0x03030303,
+ 0x00210000,
+ 0x00010021,
+ 0x00200000,
+ 0x006c0090,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x003fffff,
+ 0x003fffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000
+};
+#endif
diff --git a/arch/arm/cpu/arm926ejs/spear/start.S b/arch/arm/cpu/arm926ejs/spear/start.S
new file mode 100644
index 0000000..a103c0f
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/start.S
@@ -0,0 +1,122 @@
+/*
+ * armboot - Startup Code for ARM926EJS CPU-core
+ *
+ * Copyright (c) 2003 Texas Instruments
+ *
+ * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
+ * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
+ * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
+ * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (c) 2003 Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+
+.globl _start
+_start:
+ b reset
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+_undefined_instruction:
+_software_interrupt:
+_prefetch_abort:
+_data_abort:
+_not_used:
+_irq:
+_fiq:
+ .word infinite_loop
+
+infinite_loop:
+ b infinite_loop
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * Below are the critical initializations already taken place in BootROM.
+ * So, these are not taken care in Xloader
+ * 1. Relocation to RAM
+ * 2. Initializing stacks
+ *
+ *************************************************************************
+ */
+
+/*
+ * the actual reset code
+ */
+
+reset:
+/*
+ * Xloader has to return back to BootROM in a few cases.
+ * eg. Ethernet boot, UART boot, USB boot
+ * Saving registers for returning back
+ */
+ stmdb sp!, {r0-r12,r14}
+ bl cpu_init_crit
+/*
+ * Clearing bss area is not done in Xloader.
+ * BSS area lies in the DDR location which is not yet initialized
+ * bss is assumed to be uninitialized.
+ */
+ bl spl_boot
+ ldmia sp!, {r0-r12,pc}
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+cpu_init_crit:
+ /*
+ * flush v4 I/D caches
+ */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
+
+ /*
+ * enable instruction cache
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
+ mcr p15, 0, r0, c1, c0, 0
+
+ /*
+ * Go setup Memory and board specific bits prior to relocation.
+ */
+ stmdb sp!, {lr}
+ bl lowlevel_init /* go setup pll,mux,memory */
+ ldmia sp!, {pc}
diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
new file mode 100644
index 0000000..afd3381
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ arch/arm/cpu/arm926ejs/spear/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data)
+ }
+
+ . = ALIGN(4);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss : {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ }
+
+ _end = .;
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynsym*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.hash*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 6b7a494..71309a7 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -40,6 +40,22 @@ struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
#define UART_SMART_IDLE_EN (0x1 << 0x3)
#endif
+#ifdef CONFIG_SPL_BUILD
+/* Initialize timer */
+static void init_timer(void)
+{
+ /* Reset the Timer */
+ writel(0x2, (&timer_base->tscir));
+
+ /* Wait until the reset is done */
+ while (readl(&timer_base->tiocp_cfg) & 1)
+ ;
+
+ /* Start the Timer */
+ writel(0x1, (&timer_base->tclr));
+}
+#endif
+
/*
* early system init of muxing and clocks.
*/
@@ -88,20 +104,6 @@ void s_init(void)
enable_mmc0_pin_mux();
}
-/* Initialize timer */
-void init_timer(void)
-{
- /* Reset the Timer */
- writel(0x2, (&timer_base->tscir));
-
- /* Wait until the reset is done */
- while (readl(&timer_base->tiocp_cfg) & 1)
- ;
-
- /* Start the Timer */
- writel(0x1, (&timer_base->tclr));
-}
-
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c
index c6fa8ef..9eb484a 100644
--- a/arch/arm/cpu/armv7/cpu.c
+++ b/arch/arm/cpu/armv7/cpu.c
@@ -36,9 +36,15 @@
#include <asm/system.h>
#include <asm/cache.h>
#include <asm/armv7.h>
+#include <linux/compiler.h>
-void save_boot_params_default(u32 r0, u32 r1, u32 r2, u32 r3)
+void __naked save_boot_params_default(u32 r0, u32 r1, u32 r2, u32 r3)
{
+ /*
+ * Stack pointer is not yet initialized
+ * Don't save anything to stack even if compiled with -O0
+ */
+ asm("bx lr");
}
void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile
index 90ec2bd..9119961 100644
--- a/arch/arm/cpu/armv7/exynos/Makefile
+++ b/arch/arm/cpu/armv7/exynos/Makefile
@@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o power.o soc.o system.o
+COBJS += clock.o power.o soc.o system.o pinmux.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
new file mode 100644
index 0000000..d2b7d2c
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics.
+ * Abhilash Kesavan <a.kesavan@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/sromc.h>
+
+static void exynos5_uart_config(int peripheral)
+{
+ struct exynos5_gpio_part1 *gpio1 =
+ (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+ struct s5p_gpio_bank *bank;
+ int i, start, count;
+
+ switch (peripheral) {
+ case PERIPH_ID_UART0:
+ bank = &gpio1->a0;
+ start = 0;
+ count = 4;
+ break;
+ case PERIPH_ID_UART1:
+ bank = &gpio1->a0;
+ start = 4;
+ count = 4;
+ break;
+ case PERIPH_ID_UART2:
+ bank = &gpio1->a1;
+ start = 0;
+ count = 4;
+ break;
+ case PERIPH_ID_UART3:
+ bank = &gpio1->a1;
+ start = 4;
+ count = 2;
+ break;
+ }
+ for (i = start; i < start + count; i++) {
+ s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+ s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+ }
+}
+
+static int exynos5_mmc_config(int peripheral, int flags)
+{
+ struct exynos5_gpio_part1 *gpio1 =
+ (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+ struct s5p_gpio_bank *bank, *bank_ext;
+ int i;
+
+ switch (peripheral) {
+ case PERIPH_ID_SDMMC0:
+ bank = &gpio1->c0;
+ bank_ext = &gpio1->c1;
+ break;
+ case PERIPH_ID_SDMMC1:
+ bank = &gpio1->c1;
+ bank_ext = NULL;
+ break;
+ case PERIPH_ID_SDMMC2:
+ bank = &gpio1->c2;
+ bank_ext = &gpio1->c3;
+ break;
+ case PERIPH_ID_SDMMC3:
+ bank = &gpio1->c3;
+ bank_ext = NULL;
+ break;
+ }
+ if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
+ debug("SDMMC device %d does not support 8bit mode",
+ peripheral);
+ return -1;
+ }
+ if (flags & PINMUX_FLAG_8BIT_MODE) {
+ for (i = 3; i <= 6; i++) {
+ s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3));
+ s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);
+ s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
+ }
+ }
+ for (i = 0; i < 2; i++) {
+ s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+ s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+ s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+ }
+ for (i = 3; i <= 6; i++) {
+ s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+ s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
+ s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+ }
+ return 0;
+}
+
+static void exynos5_sromc_config(int flags)
+{
+ struct exynos5_gpio_part1 *gpio1 =
+ (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+ int i;
+
+ /*
+ * SROM:CS1 and EBI
+ *
+ * GPY0[0] SROM_CSn[0]
+ * GPY0[1] SROM_CSn[1](2)
+ * GPY0[2] SROM_CSn[2]
+ * GPY0[3] SROM_CSn[3]
+ * GPY0[4] EBI_OEn(2)
+ * GPY0[5] EBI_EEn(2)
+ *
+ * GPY1[0] EBI_BEn[0](2)
+ * GPY1[1] EBI_BEn[1](2)
+ * GPY1[2] SROM_WAIT(2)
+ * GPY1[3] EBI_DATA_RDn(2)
+ */
+ s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),
+ GPIO_FUNC(2));
+ s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
+ s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
+
+ for (i = 0; i < 4; i++)
+ s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
+
+ /*
+ * EBI: 8 Addrss Lines
+ *
+ * GPY3[0] EBI_ADDR[0](2)
+ * GPY3[1] EBI_ADDR[1](2)
+ * GPY3[2] EBI_ADDR[2](2)
+ * GPY3[3] EBI_ADDR[3](2)
+ * GPY3[4] EBI_ADDR[4](2)
+ * GPY3[5] EBI_ADDR[5](2)
+ * GPY3[6] EBI_ADDR[6](2)
+ * GPY3[7] EBI_ADDR[7](2)
+ *
+ * EBI: 16 Data Lines
+ *
+ * GPY5[0] EBI_DATA[0](2)
+ * GPY5[1] EBI_DATA[1](2)
+ * GPY5[2] EBI_DATA[2](2)
+ * GPY5[3] EBI_DATA[3](2)
+ * GPY5[4] EBI_DATA[4](2)
+ * GPY5[5] EBI_DATA[5](2)
+ * GPY5[6] EBI_DATA[6](2)
+ * GPY5[7] EBI_DATA[7](2)
+ *
+ * GPY6[0] EBI_DATA[8](2)
+ * GPY6[1] EBI_DATA[9](2)
+ * GPY6[2] EBI_DATA[10](2)
+ * GPY6[3] EBI_DATA[11](2)
+ * GPY6[4] EBI_DATA[12](2)
+ * GPY6[5] EBI_DATA[13](2)
+ * GPY6[6] EBI_DATA[14](2)
+ * GPY6[7] EBI_DATA[15](2)
+ */
+ for (i = 0; i < 8; i++) {
+ s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
+ s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
+
+ s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
+ s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
+
+ s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
+ s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
+ }
+}
+
+static int exynos5_pinmux_config(int peripheral, int flags)
+{
+ switch (peripheral) {
+ case PERIPH_ID_UART0:
+ case PERIPH_ID_UART1:
+ case PERIPH_ID_UART2:
+ case PERIPH_ID_UART3:
+ exynos5_uart_config(peripheral);
+ break;
+ case PERIPH_ID_SDMMC0:
+ case PERIPH_ID_SDMMC1:
+ case PERIPH_ID_SDMMC2:
+ case PERIPH_ID_SDMMC3:
+ return exynos5_mmc_config(peripheral, flags);
+ case PERIPH_ID_SROMC:
+ exynos5_sromc_config(flags);
+ break;
+ default:
+ debug("%s: invalid peripheral %d", __func__, peripheral);
+ return -1;
+ }
+
+ return 0;
+}
+
+int exynos_pinmux_config(int peripheral, int flags)
+{
+ if (cpu_is_exynos5())
+ return exynos5_pinmux_config(peripheral, flags);
+ else {
+ debug("pinmux functionality not supported\n");
+ return -1;
+ }
+}
diff --git a/arch/arm/cpu/armv7/imx-common/speed.c b/arch/arm/cpu/armv7/imx-common/speed.c
index 2187e8e..80989c4 100644
--- a/arch/arm/cpu/armv7/imx-common/speed.c
+++ b/arch/arm/cpu/armv7/imx-common/speed.c
@@ -35,7 +35,11 @@ DECLARE_GLOBAL_DATA_PTR;
int get_clocks(void)
{
#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_USDHC
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#else
gd->sdhc_clk = mxc_get_clock(MXC_IPG_PERCLK);
#endif
+#endif
return 0;
}
diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
index fc2406b..64862b3 100644
--- a/arch/arm/cpu/armv7/mx5/clock.c
+++ b/arch/arm/cpu/armv7/mx5/clock.c
@@ -843,7 +843,7 @@ void mxc_set_sata_internal_clock(void)
set_usb_phy1_clk();
- writel((readl(tmp_base) & (~0x7)) | 0x4, tmp_base);
+ writel((readl(tmp_base) & (~0x6)) | 0x4, tmp_base);
}
#endif
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 90f2088..84b458c 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -43,7 +43,6 @@ u32 get_cpu_rev(void)
return system_rev;
}
-#ifdef CONFIG_ARCH_CPU_INIT
void init_aips(void)
{
struct aipstz_regs *aips1, *aips2;
@@ -113,7 +112,6 @@ int arch_cpu_init(void)
return 0;
}
-#endif
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 10d286a..b1fd277 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -299,8 +299,12 @@ static void setup_dplls(void)
* Core DPLL will be locked after setting up EMIF
* using the FREQ_UPDATE method(freq_update_core())
*/
- do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, DPLL_NO_LOCK,
- "core");
+ if (omap_revision() != OMAP5432_ES1_0)
+ do_setup_dpll(&prcm->cm_clkmode_dpll_core, params,
+ DPLL_NO_LOCK, "core");
+ else
+ do_setup_dpll(&prcm->cm_clkmode_dpll_core, params,
+ DPLL_LOCK, "core");
/* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */
temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) |
(CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) |
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index db509c9..30dcf1b 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -31,6 +31,28 @@
#include <asm/arch/sys_proto.h>
#include <asm/omap_common.h>
#include <asm/utils.h>
+#include <linux/compiler.h>
+
+void set_lpmode_selfrefresh(u32 base)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+ u32 reg;
+
+ reg = readl(&emif->emif_pwr_mgmt_ctrl);
+ reg &= ~EMIF_REG_LP_MODE_MASK;
+ reg |= LP_MODE_SELF_REFRESH << EMIF_REG_LP_MODE_SHIFT;
+ reg &= ~EMIF_REG_SR_TIM_MASK;
+ writel(reg, &emif->emif_pwr_mgmt_ctrl);
+
+ /* dummy read for the new SR_TIM to be loaded */
+ readl(&emif->emif_pwr_mgmt_ctrl);
+}
+
+void force_emif_self_refresh()
+{
+ set_lpmode_selfrefresh(EMIF1_BASE);
+ set_lpmode_selfrefresh(EMIF2_BASE);
+}
inline u32 emif_num(u32 base)
{
@@ -56,7 +78,12 @@ static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
mr = readl(&emif->emif_lpddr2_mode_reg_data);
debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base),
cs, mr_addr, mr);
- return mr;
+ if (((mr & 0x0000ff00) >> 8) == (mr & 0xff) &&
+ ((mr & 0x00ff0000) >> 16) == (mr & 0xff) &&
+ ((mr & 0xff000000) >> 24) == (mr & 0xff))
+ return mr & 0xff;
+ else
+ return mr;
}
static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val)
@@ -114,9 +141,6 @@ static void do_lpddr2_init(u32 base, u32 cs)
static void lpddr2_init(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- u32 *ext_phy_ctrl_base = 0;
- u32 *emif_ext_phy_ctrl_base = 0;
- u32 i = 0;
/* Not NVM */
clrbits_le32(&emif->emif_lpddr2_nvm_config, EMIF_REG_CS1NVMEN_MASK);
@@ -134,29 +158,7 @@ static void lpddr2_init(u32 base, const struct emif_regs *regs)
writel(regs->sdram_config_init, &emif->emif_sdram_config);
writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
- ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1);
- emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1);
-
- if (omap_revision() >= OMAP5430_ES1_0) {
- /* Configure external phy control timing registers */
- for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
- writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
- /* Update shadow registers */
- writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
- }
-
- /*
- * external phy 6-24 registers do not change with
- * ddr frequency
- */
- for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
- writel(ext_phy_ctrl_const_base[i],
- emif_ext_phy_ctrl_base++);
- /* Update shadow registers */
- writel(ext_phy_ctrl_const_base[i],
- emif_ext_phy_ctrl_base++);
- }
- }
+ do_ext_phy_settings(base, regs);
do_lpddr2_init(base, CS0);
if (regs->sdram_config & EMIF_REG_EBANK_MASK)
@@ -168,6 +170,10 @@ static void lpddr2_init(u32 base, const struct emif_regs *regs)
/* Enable refresh now */
clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
+ }
+
+__weak void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
+{
}
void emif_update_timings(u32 base, const struct emif_regs *regs)
@@ -190,7 +196,7 @@ void emif_update_timings(u32 base, const struct emif_regs *regs)
writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
- if (omap_revision() == OMAP5430_ES1_0) {
+ if (omap_revision() >= OMAP5430_ES1_0) {
writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
&emif->emif_l3_config);
} else if (omap_revision() >= OMAP4460_ES1_0) {
@@ -202,6 +208,101 @@ void emif_update_timings(u32 base, const struct emif_regs *regs)
}
}
+static void ddr3_leveling(u32 base, const struct emif_regs *regs)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ /* keep sdram in self-refresh */
+ writel(((LP_MODE_SELF_REFRESH << EMIF_REG_LP_MODE_SHIFT)
+ & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl);
+ __udelay(130);
+
+ /*
+ * Set invert_clkout (if activated)--DDR_PHYCTRL_1
+ * Invert clock adds an additional half cycle delay on the command
+ * interface. The additional half cycle, is usually meant to enable
+ * leveling in the situation that DQS is later than CK on the board.It
+ * also helps provide some additional margin for leveling.
+ */
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+ __udelay(130);
+
+ writel(((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT)
+ & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl);
+
+ /* Launch Full leveling */
+ writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl);
+
+ /* Wait till full leveling is complete */
+ readl(&emif->emif_rd_wr_lvl_ctl);
+ __udelay(130);
+
+ /* Read data eye leveling no of samples */
+ config_data_eye_leveling_samples(base);
+
+ /* Launch 8 incremental WR_LVL- to compensate for PHY limitation */
+ writel(0x2 << EMIF_REG_WRLVLINC_INT_SHIFT, &emif->emif_rd_wr_lvl_ctl);
+ __udelay(130);
+
+ /* Launch Incremental leveling */
+ writel(DDR3_INC_LVL, &emif->emif_rd_wr_lvl_ctl);
+ __udelay(130);
+}
+
+static void ddr3_init(u32 base, const struct emif_regs *regs)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+ u32 *ext_phy_ctrl_base = 0;
+ u32 *emif_ext_phy_ctrl_base = 0;
+ u32 i = 0;
+
+ /*
+ * Set SDRAM_CONFIG and PHY control registers to locked frequency
+ * and RL =7. As the default values of the Mode Registers are not
+ * defined, contents of mode Registers must be fully initialized.
+ * H/W takes care of this initialization
+ */
+ writel(regs->sdram_config_init, &emif->emif_sdram_config);
+
+ writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
+
+ /* Update timing registers */
+ writel(regs->sdram_tim1, &emif->emif_sdram_tim_1);
+ writel(regs->sdram_tim2, &emif->emif_sdram_tim_2);
+ writel(regs->sdram_tim3, &emif->emif_sdram_tim_3);
+
+ writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);
+ writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl);
+
+ ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1);
+ emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1);
+
+ /* Configure external phy control timing registers */
+ for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
+ writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
+ /* Update shadow registers */
+ writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
+ }
+
+ /*
+ * external phy 6-24 registers do not change with
+ * ddr frequency
+ */
+ for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
+ writel(ddr3_ext_phy_ctrl_const_base[i],
+ emif_ext_phy_ctrl_base++);
+ /* Update shadow registers */
+ writel(ddr3_ext_phy_ctrl_const_base[i],
+ emif_ext_phy_ctrl_base++);
+ }
+
+ /* enable leveling */
+ writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
+
+ ddr3_leveling(base, regs);
+}
+
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
@@ -826,7 +927,7 @@ static u8 is_lpddr2_sdram_present(u32 base, u32 cs,
}
mr = get_mr(base, cs, LPDDR2_MR5);
- if (mr >= 0xFF) {
+ if (mr > 0xFF) {
/* Mode register value bigger than 8 bit */
return 0;
}
@@ -895,7 +996,7 @@ struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
return NULL;
/* Do the minimum init for mode register accesses */
- if (!running_from_sdram()) {
+ if (!(running_from_sdram() || warm_reset())) {
phy = get_ddr_phy_ctrl_1(get_sys_clk_freq() / 2, RL_BOOT);
writel(phy, &emif->emif_ddr_phy_ctrl_1);
}
@@ -975,8 +1076,12 @@ static void do_sdram_init(u32 base)
* Changing the timing registers in EMIF can happen(going from one
* OPP to another)
*/
- if (!in_sdram)
- lpddr2_init(base, regs);
+ if (!(in_sdram || warm_reset())) {
+ if (omap_revision() != OMAP5432_ES1_0)
+ lpddr2_init(base, regs);
+ else
+ ddr3_init(base, regs);
+ }
/* Write to the shadow registers */
emif_update_timings(base, regs);
@@ -1133,6 +1238,7 @@ void dmm_init(u32 base)
void sdram_init(void)
{
u32 in_sdram, size_prog, size_detect;
+ u32 omap_rev = omap_revision();
debug(">>sdram_init()\n");
@@ -1142,25 +1248,34 @@ void sdram_init(void)
in_sdram = running_from_sdram();
debug("in_sdram = %d\n", in_sdram);
- if (!in_sdram)
- bypass_dpll(&prcm->cm_clkmode_dpll_core);
-
+ if (!(in_sdram || warm_reset())) {
+ if (omap_rev != OMAP5432_ES1_0)
+ bypass_dpll(&prcm->cm_clkmode_dpll_core);
+ else
+ writel(CM_DLL_CTRL_NO_OVERRIDE, &prcm->cm_dll_ctrl);
+ }
do_sdram_init(EMIF1_BASE);
do_sdram_init(EMIF2_BASE);
- if (!in_sdram) {
+ if (!in_sdram)
dmm_init(DMM_BASE);
+
+ if (!(in_sdram || warm_reset())) {
emif_post_init_config(EMIF1_BASE);
emif_post_init_config(EMIF2_BASE);
}
/* for the shadow registers to take effect */
- freq_update_core();
+ if (omap_rev != OMAP5432_ES1_0)
+ freq_update_core();
/* Do some testing after the init */
if (!in_sdram) {
size_prog = omap_sdram_size();
+ size_prog = log_2_n_round_down(size_prog);
+ size_prog = (1 << size_prog);
+
size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
size_prog);
/* Compare with the size programmed */
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index cf71ab4..459ebb5 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -111,6 +111,10 @@ static void init_boot_params(void)
void s_init(void)
{
init_omap_revision();
+#ifdef CONFIG_SPL_BUILD
+ if (warm_reset() && (omap_revision() <= OMAP5430_ES1_0))
+ force_emif_self_refresh();
+#endif
watchdog_init();
set_mux_conf_regs();
#ifdef CONFIG_SPL_BUILD
@@ -162,11 +166,16 @@ void watchdog_init(void)
*/
u32 omap_sdram_size(void)
{
- u32 section, i, total_size = 0, size, addr;
+ u32 section, i, valid;
+ u64 sdram_start = 0, sdram_end = 0, addr,
+ size, total_size = 0, trap_size = 0;
for (i = 0; i < 4; i++) {
section = __raw_readl(DMM_BASE + i*4);
+ valid = (section & EMIF_SDRC_ADDRSPC_MASK) >>
+ (EMIF_SDRC_ADDRSPC_SHIFT);
addr = section & EMIF_SYS_ADDR_MASK;
+
/* See if the address is valid */
if ((addr >= DRAM_ADDR_SPACE_START) &&
(addr < DRAM_ADDR_SPACE_END)) {
@@ -174,9 +183,20 @@ u32 omap_sdram_size(void)
EMIF_SYS_SIZE_SHIFT);
size = 1 << size;
size *= SZ_16M;
- total_size += size;
+
+ if (valid != DMM_SDRC_ADDR_SPC_INVALID) {
+ if (!sdram_start || (addr < sdram_start))
+ sdram_start = addr;
+ if (!sdram_end || ((addr + size) > sdram_end))
+ sdram_end = addr + size;
+ } else {
+ trap_size = size;
+ }
+
}
+
}
+ total_size = (sdram_end - sdram_start) - (trap_size);
return total_size;
}
diff --git a/arch/arm/cpu/armv7/omap-common/reset.c b/arch/arm/cpu/armv7/omap-common/reset.c
index 234e90a..587bb47 100644
--- a/arch/arm/cpu/armv7/omap-common/reset.c
+++ b/arch/arm/cpu/armv7/omap-common/reset.c
@@ -34,3 +34,8 @@ void __weak reset_cpu(unsigned long ignored)
{
writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL);
}
+
+u32 __weak warm_reset(void)
+{
+ return (readl(PRM_RSTST) & PRM_RSTST_WARM_RESET_MASK);
+}
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
index c568951..5bd0a88 100644
--- a/arch/arm/cpu/armv7/omap4/clocks.c
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -146,7 +146,7 @@ static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
{727, 14, -1, -1, 4, 7, -1, -1}, /* 19.2 MHz */
{931, 25, -1, -1, 4, 7, -1, -1}, /* 26 MHz */
{931, 26, -1, -1, 4, 7, -1, -1}, /* 27 MHz */
- {412, 16, -1, -1, 4, 7, -1, -1} /* 38.4 MHz */
+ {291, 11, -1, -1, 4, 7, -1, -1} /* 38.4 MHz */
};
/* ABE M & N values with sys_clk as source */
@@ -354,6 +354,7 @@ void enable_basic_clocks(void)
};
u32 *const clk_modules_hw_auto_essential[] = {
+ &prcm->cm_l3_2_gpmc_clkctrl,
&prcm->cm_memif_emif_1_clkctrl,
&prcm->cm_memif_emif_2_clkctrl,
&prcm->cm_l4cfg_l4_cfg_clkctrl,
@@ -363,9 +364,6 @@ void enable_basic_clocks(void)
&prcm->cm_l4per_gpio4_clkctrl,
&prcm->cm_l4per_gpio5_clkctrl,
&prcm->cm_l4per_gpio6_clkctrl,
- &prcm->cm_l3init_usbphy_clkctrl,
- &prcm->cm_clksel_usb_60mhz,
- &prcm->cm_l3init_hsusbtll_clkctrl,
0
};
@@ -376,7 +374,6 @@ void enable_basic_clocks(void)
&prcm->cm_l4per_gptimer2_clkctrl,
&prcm->cm_wkup_wdtimer2_clkctrl,
&prcm->cm_l4per_uart3_clkctrl,
- &prcm->cm_l3init_hsusbhost_clkctrl,
0
};
@@ -413,6 +410,9 @@ void enable_basic_uboot_clocks(void)
u32 *const clk_modules_hw_auto_essential[] = {
&prcm->cm_l3init_hsusbotg_clkctrl,
&prcm->cm_l3init_usbphy_clkctrl,
+ &prcm->cm_l3init_usbphy_clkctrl,
+ &prcm->cm_clksel_usb_60mhz,
+ &prcm->cm_l3init_hsusbtll_clkctrl,
0
};
@@ -422,6 +422,7 @@ void enable_basic_uboot_clocks(void)
&prcm->cm_l4per_i2c2_clkctrl,
&prcm->cm_l4per_i2c3_clkctrl,
&prcm->cm_l4per_i2c4_clkctrl,
+ &prcm->cm_l3init_hsusbhost_clkctrl,
0
};
@@ -452,12 +453,10 @@ void enable_non_essential_clocks(void)
};
u32 *const clk_modules_hw_auto_non_essential[] = {
- &prcm->cm_l3_2_gpmc_clkctrl,
&prcm->cm_l3instr_l3_3_clkctrl,
&prcm->cm_l3instr_l3_instr_clkctrl,
&prcm->cm_l3instr_intrconn_wp1_clkctrl,
&prcm->cm_l3init_hsi_clkctrl,
- &prcm->cm_l3init_hsusbtll_clkctrl,
0
};
@@ -497,7 +496,6 @@ void enable_non_essential_clocks(void)
&prcm->cm_cam_fdif_clkctrl,
&prcm->cm_dss_dss_clkctrl,
&prcm->cm_sgx_sgx_clkctrl,
- &prcm->cm_l3init_hsusbhost_clkctrl,
0
};
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
index 187e938..2c34e48 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -118,6 +118,11 @@ void do_io_settings(void)
}
#endif
+/* dummy fuction for omap4 */
+void config_data_eye_leveling_samples(u32 emif_base)
+{
+}
+
void init_omap_revision(void)
{
/*
diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
index b538960..b9128fa 100644
--- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c
+++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
@@ -91,7 +91,7 @@ const struct emif_regs emif_regs_elpida_400_mhz_2cs = {
};
/* Dummy registers for OMAP44xx */
-const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG];
+const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG];
const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
.dmm_lisa_map_0 = 0xFF020100,
diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
index 1a59f26..eecfbad 100644
--- a/arch/arm/cpu/armv7/omap5/clocks.c
+++ b/arch/arm/cpu/armv7/omap5/clocks.c
@@ -260,20 +260,31 @@ const struct dpll_params *get_abe_dpll_params(void)
*/
void scale_vcores(void)
{
- u32 volt;
+ u32 volt_core, volt_mpu, volt_mm;
omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
/* Palmas settings */
- volt = VDD_CORE;
- do_scale_vcore(SMPS_REG_ADDR_8_CORE, volt);
-
- volt = VDD_MPU;
- do_scale_vcore(SMPS_REG_ADDR_12_MPU, volt);
-
- volt = VDD_MM;
- do_scale_vcore(SMPS_REG_ADDR_45_IVA, volt);
-
+ if (omap_revision() != OMAP5432_ES1_0) {
+ volt_core = VDD_CORE;
+ volt_mpu = VDD_MPU;
+ volt_mm = VDD_MM;
+ } else {
+ volt_core = VDD_CORE_5432;
+ volt_mpu = VDD_MPU_5432;
+ volt_mm = VDD_MM_5432;
+ }
+
+ do_scale_vcore(SMPS_REG_ADDR_8_CORE, volt_core);
+ do_scale_vcore(SMPS_REG_ADDR_12_MPU, volt_mpu);
+ do_scale_vcore(SMPS_REG_ADDR_45_IVA, volt_mm);
+
+ if (omap_revision() == OMAP5432_ES1_0) {
+ /* Configure LDO SRAM "magic" bits */
+ writel(2, &prcm->prm_sldo_core_setup);
+ writel(2, &prcm->prm_sldo_mpu_setup);
+ writel(2, &prcm->prm_sldo_mm_setup);
+ }
}
u32 get_offset_code(u32 volt_offset)
@@ -306,6 +317,7 @@ void enable_basic_clocks(void)
};
u32 *const clk_modules_hw_auto_essential[] = {
+ &prcm->cm_l3_2_gpmc_clkctrl,
&prcm->cm_memif_emif_1_clkctrl,
&prcm->cm_memif_emif_2_clkctrl,
&prcm->cm_l4cfg_l4_cfg_clkctrl,
@@ -382,6 +394,9 @@ void enable_basic_uboot_clocks(void)
&prcm->cm_l4per_i2c2_clkctrl,
&prcm->cm_l4per_i2c3_clkctrl,
&prcm->cm_l4per_i2c4_clkctrl,
+ &prcm->cm_l3init_hsusbtll_clkctrl,
+ &prcm->cm_l3init_hsusbhost_clkctrl,
+ &prcm->cm_l3init_fsusb_clkctrl,
0
};
@@ -416,12 +431,10 @@ void enable_non_essential_clocks(void)
&prcm->cm_ivahd_ivahd_clkctrl,
&prcm->cm_ivahd_sl2_clkctrl,
&prcm->cm_dsp_dsp_clkctrl,
- &prcm->cm_l3_2_gpmc_clkctrl,
&prcm->cm_l3instr_l3_3_clkctrl,
&prcm->cm_l3instr_l3_instr_clkctrl,
&prcm->cm_l3instr_intrconn_wp1_clkctrl,
&prcm->cm_l3init_hsi_clkctrl,
- &prcm->cm_l3init_hsusbtll_clkctrl,
&prcm->cm_l4per_hdq1w_clkctrl,
0
};
@@ -460,8 +473,6 @@ void enable_non_essential_clocks(void)
&prcm->cm_cam_fdif_clkctrl,
&prcm->cm_dss_dss_clkctrl,
&prcm->cm_sgx_sgx_clkctrl,
- &prcm->cm_l3init_hsusbhost_clkctrl,
- &prcm->cm_l3init_fsusb_clkctrl,
0
};
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index d01cc81..d0c3ff7 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -35,6 +35,7 @@
#include <asm/sizes.h>
#include <asm/utils.h>
#include <asm/arch/gpio.h>
+#include <asm/emif.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -52,6 +53,81 @@ static struct gpio_bank gpio_bank_54xx[6] = {
const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
#ifdef CONFIG_SPL_BUILD
+/* LPDDR2 specific IO settings */
+static void io_settings_lpddr2(void)
+{
+ struct omap_sys_ctrl_regs *ioregs_base =
+ (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
+
+ writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
+ &(ioregs_base->control_ddrch1_0));
+ writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
+ &(ioregs_base->control_ddrch1_1));
+ writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
+ &(ioregs_base->control_ddrch2_0));
+ writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
+ &(ioregs_base->control_ddrch2_1));
+ writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
+ &(ioregs_base->control_lpddr2ch1_0));
+ writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
+ &(ioregs_base->control_lpddr2ch1_1));
+ writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
+ &(ioregs_base->control_ddrio_0));
+ writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
+ &(ioregs_base->control_ddrio_1));
+ writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
+ &(ioregs_base->control_ddrio_2));
+}
+
+/* DDR3 specific IO settings */
+static void io_settings_ddr3(void)
+{
+ u32 io_settings = 0;
+ struct omap_sys_ctrl_regs *ioregs_base =
+ (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
+
+ writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
+ &(ioregs_base->control_ddr3ch1_0));
+ writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
+ &(ioregs_base->control_ddrch1_0));
+ writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
+ &(ioregs_base->control_ddrch1_1));
+
+ writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
+ &(ioregs_base->control_ddr3ch2_0));
+ writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
+ &(ioregs_base->control_ddrch2_0));
+ writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
+ &(ioregs_base->control_ddrch2_1));
+
+ writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE,
+ &(ioregs_base->control_ddrio_0));
+ writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE,
+ &(ioregs_base->control_ddrio_1));
+ writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE,
+ &(ioregs_base->control_ddrio_2));
+
+ /* omap5432 does not use lpddr2 */
+ writel(0x0, &(ioregs_base->control_lpddr2ch1_0));
+ writel(0x0, &(ioregs_base->control_lpddr2ch1_1));
+
+ writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+ &(ioregs_base->control_emif1_sdram_config_ext));
+ writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+ &(ioregs_base->control_emif2_sdram_config_ext));
+
+ /* Disable DLL select */
+ io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config))
+ & 0xFFEFFFFF);
+ writel(io_settings,
+ &(ioregs_base->control_port_emif1_sdram_config));
+
+ io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config))
+ & 0xFFEFFFFF);
+ writel(io_settings,
+ &(ioregs_base->control_port_emif2_sdram_config));
+}
+
/*
* Some tuning of IOs for optimal power and performance
*/
@@ -115,25 +191,10 @@ void do_io_settings(void)
(sc_fast << 17) | (sc_fast << 14);
writel(io_settings, &(ioregs_base->control_smart3io_padconf_1));
- /* LPDDR2 io settings */
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch1_0));
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch1_1));
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch2_0));
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch2_1));
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
- &(ioregs_base->control_lpddr2ch1_0));
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
- &(ioregs_base->control_lpddr2ch1_1));
- writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
- &(ioregs_base->control_ddrio_0));
- writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
- &(ioregs_base->control_ddrio_1));
- writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
- &(ioregs_base->control_ddrio_2));
+ if (omap_revision() <= OMAP5430_ES1_0)
+ io_settings_lpddr2();
+ else
+ io_settings_ddr3();
/* Efuse settings */
writel(EFUSE_1, &(ioregs_base->control_efuse_1));
@@ -143,6 +204,20 @@ void do_io_settings(void)
}
#endif
+void config_data_eye_leveling_samples(u32 emif_base)
+{
+ struct omap_sys_ctrl_regs *ioregs_base =
+ (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
+
+ /*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
+ if (emif_base == EMIF1_BASE)
+ writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
+ &(ioregs_base->control_emif1_sdram_config_ext));
+ else if (emif_base == EMIF2_BASE)
+ writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
+ &(ioregs_base->control_emif2_sdram_config_ext));
+}
+
void init_omap_revision(void)
{
/*
@@ -154,7 +229,15 @@ void init_omap_revision(void)
switch (rev) {
case MIDR_CORTEX_A15_R0P0:
- *omap_si_rev = OMAP5430_ES1_0;
+ switch (readl(CONTROL_ID_CODE)) {
+ case OMAP5430_CONTROL_ID_CODE_ES1_0:
+ *omap_si_rev = OMAP5430_ES1_0;
+ break;
+ case OMAP5432_CONTROL_ID_CODE_ES1_0:
+ default:
+ *omap_si_rev = OMAP5432_ES1_0;
+ break;
+ }
break;
default:
*omap_si_rev = OMAP5430_SILICON_ID_INVALID;
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index b2b5753..6ebdf5f 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -86,11 +86,34 @@ const struct emif_regs emif_regs_266_mhz_2cs = {
.emif_ddr_ext_phy_ctrl_5 = 0x04010040
};
+const struct emif_regs emif_regs_ddr3_532_mhz_1cs = {
+ .sdram_config_init = 0x61851B32,
+ .sdram_config = 0x61851B32,
+ .ref_ctrl = 0x00001035,
+ .sdram_tim1 = 0xCCCF36B3,
+ .sdram_tim2 = 0x308F7FDA,
+ .sdram_tim3 = 0x027F88A8,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x0007190B,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0020420A,
+ .emif_ddr_phy_ctlr_1 = 0x0024420A,
+ .emif_ddr_ext_phy_ctrl_1 = 0x04040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00000000,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00000000,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00000000,
+ .emif_ddr_ext_phy_ctrl_5 = 0x04010040,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x00000305
+};
+
const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
.dmm_lisa_map_0 = 0x0,
- .dmm_lisa_map_1 = 0,
- .dmm_lisa_map_2 = 0,
- .dmm_lisa_map_3 = 0x80740300
+ .dmm_lisa_map_1 = 0x0,
+ .dmm_lisa_map_2 = 0x80740300,
+ .dmm_lisa_map_3 = 0xFF020100
};
const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
@@ -115,9 +138,34 @@ const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
0x00000077
};
+const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+ 0x01004010,
+ 0x00001004,
+ 0x04010040,
+ 0x01004010,
+ 0x00001004,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x80080080,
+ 0x00800800,
+ 0x08102040,
+ 0x00000002,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000057
+};
+
static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
{
- *regs = &emif_regs_532_mhz_2cs;
+ if (omap_revision() == OMAP5432_ES1_0)
+ *regs = &emif_regs_ddr3_532_mhz_1cs;
+ else
+ *regs = &emif_regs_532_mhz_2cs;
}
void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
__attribute__((weak, alias("emif_get_reg_dump_sdp")));
@@ -156,6 +204,37 @@ void emif_get_device_details(u32 emif_nr,
#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
+{
+ u32 *ext_phy_ctrl_base = 0;
+ u32 *emif_ext_phy_ctrl_base = 0;
+ u32 i = 0;
+
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1);
+ emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1);
+
+ /* Configure external phy control timing registers */
+ for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
+ writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
+ /* Update shadow registers */
+ writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
+ }
+
+ /*
+ * external phy 6-24 registers do not change with
+ * ddr frequency
+ */
+ for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
+ writel(ext_phy_ctrl_const_base[i],
+ emif_ext_phy_ctrl_base++);
+ /* Update shadow registers */
+ writel(ext_phy_ctrl_const_base[i],
+ emif_ext_phy_ctrl_base++);
+ }
+}
+
#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
.max_freq = 532000000,
diff --git a/arch/arm/cpu/armv7/s5p-common/cpu_info.c b/arch/arm/cpu/armv7/s5p-common/cpu_info.c
index 527f32d..1642733 100644
--- a/arch/arm/cpu/armv7/s5p-common/cpu_info.c
+++ b/arch/arm/cpu/armv7/s5p-common/cpu_info.c
@@ -48,8 +48,9 @@ int print_cpuinfo(void)
{
char buf[32];
- printf("CPU:\tS5P%X@%sMHz\n",
- s5p_cpu_id, strmhz(buf, get_arm_clk()));
+ printf("CPU:\t%s%X@%sMHz\n",
+ s5p_get_cpu_name(), s5p_cpu_id,
+ strmhz(buf, get_arm_clk()));
return 0;
}
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 261835b..22a3ced 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -277,6 +277,18 @@ jump_2_ram:
mcr p15, 0, r0, c7, c10, 4 @ DSB
mcr p15, 0, r0, c7, c5, 4 @ ISB
#endif
+/*
+ * Move vector table
+ */
+#if !defined(CONFIG_TEGRA2)
+#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
+ /* Set vector address in CP15 VBAR register */
+ ldr r0, =_start
+ add r0, r0, r9
+ mcr p15, 0, r0, c12, c0, 0 @Set VBAR
+#endif
+#endif /* !Tegra2 */
+
ldr r0, _board_init_r_ofs
adr r1, _start
add lr, r0, r1
diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c b/arch/arm/cpu/armv7/tegra2/ap20.c
index 698bfd0..1aad387 100644
--- a/arch/arm/cpu/armv7/tegra2/ap20.c
+++ b/arch/arm/cpu/armv7/tegra2/ap20.c
@@ -77,8 +77,10 @@ static int ap20_cpu_is_cortexa9(void)
void init_pllx(void)
{
- struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_XCPU];
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ struct clk_pll_simple *pll =
+ &clkrst->crc_pll_simple[CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE];
u32 reg;
/* If PLLX is already enabled, just return */
@@ -312,9 +314,28 @@ void enable_scu(void)
writel(reg, &scu->scu_ctrl);
}
+static u32 get_odmdata(void)
+{
+ /*
+ * ODMDATA is stored in the BCT in IRAM by the BootROM.
+ * The BCT start and size are stored in the BIT in IRAM.
+ * Read the data @ bct_start + (bct_size - 12). This works
+ * on T20 and T30 BCTs, which are locked down. If this changes
+ * in new chips (T114, etc.), we can revisit this algorithm.
+ */
+
+ u32 bct_start, odmdata;
+
+ bct_start = readl(AP20_BASE_PA_SRAM + NVBOOTINFOTABLE_BCTPTR);
+ odmdata = readl(bct_start + BCT_ODMDATA_OFFSET);
+
+ return odmdata;
+}
+
void init_pmc_scratch(void)
{
struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
+ u32 odmdata;
int i;
/* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */
@@ -322,7 +343,8 @@ void init_pmc_scratch(void)
writel(0, &pmc->pmc_scratch1+i);
/* ODMDATA is for kernel use to determine RAM size, LP config, etc. */
- writel(CONFIG_SYS_BOARD_ODMDATA, &pmc->pmc_scratch20);
+ odmdata = get_odmdata();
+ writel(odmdata, &pmc->pmc_scratch20);
#ifdef CONFIG_TEGRA2_LP0
/* save Sdram params to PMC 2, 4, and 24 for WB0 */
diff --git a/arch/arm/cpu/armv7/tegra2/board.c b/arch/arm/cpu/armv7/tegra2/board.c
index a50b1b9..923678d 100644
--- a/arch/arm/cpu/armv7/tegra2/board.c
+++ b/arch/arm/cpu/armv7/tegra2/board.c
@@ -101,6 +101,22 @@ int arch_cpu_init(void)
}
#endif
+static int uart_configs[] = {
+#if defined(CONFIG_TEGRA2_UARTA_UAA_UAB)
+ FUNCMUX_UART1_UAA_UAB,
+#elif defined(CONFIG_TEGRA2_UARTA_GPU)
+ FUNCMUX_UART1_GPU,
+#elif defined(CONFIG_TEGRA2_UARTA_SDIO1)
+ FUNCMUX_UART1_SDIO1,
+#else
+ FUNCMUX_UART1_IRRX_IRTX,
+#endif
+ FUNCMUX_UART2_IRDA,
+ -1,
+ FUNCMUX_UART4_GMC,
+ -1,
+};
+
/**
* Set up the specified uarts
*
@@ -120,7 +136,7 @@ static void setup_uarts(int uart_ids)
if (uart_ids & (1 << i)) {
enum periph_id id = id_for_uart[i];
- funcmux_select(id, FUNCMUX_DEFAULT);
+ funcmux_select(id, uart_configs[i]);
clock_ll_start_uart(id);
}
}
diff --git a/arch/arm/cpu/armv7/tegra2/clock.c b/arch/arm/cpu/armv7/tegra2/clock.c
index ccad351..602589c 100644
--- a/arch/arm/cpu/armv7/tegra2/clock.c
+++ b/arch/arm/cpu/armv7/tegra2/clock.c
@@ -426,7 +426,7 @@ static struct clk_pll *get_pll(enum clock_id clkid)
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- assert(clock_id_isvalid(clkid));
+ assert(clock_id_is_pll(clkid));
return &clkrst->crc_pll[clkid];
}
@@ -439,7 +439,7 @@ int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
assert(clkid != CLOCK_ID_USB);
/* Safety check, adds to code size but is small */
- if (!clock_id_isvalid(clkid) || clkid == CLOCK_ID_USB)
+ if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
return -1;
data = readl(&pll->pll_base);
*divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
diff --git a/arch/arm/cpu/armv7/tegra2/config.mk b/arch/arm/cpu/armv7/tegra2/config.mk
index fe9ef5b..4dd8cb8 100644
--- a/arch/arm/cpu/armv7/tegra2/config.mk
+++ b/arch/arm/cpu/armv7/tegra2/config.mk
@@ -24,10 +24,13 @@
# MA 02111-1307 USA
#
-# Tegra has an ARMv4T CPU which runs board_init_f(), so we must build this
-# file with compatible flags
+# Tegra has an ARMv4T CPU which runs board_init_f(), so we must build these
+# files with compatible flags
ifdef CONFIG_TEGRA2
CFLAGS_arch/arm/lib/board.o += -march=armv4t
+CFLAGS_arch/arm/lib/memset.o += -march=armv4t
+CFLAGS_lib/string.o += -march=armv4t
+CFLAGS_common/cmd_nvedit.o += -march=armv4t
endif
USE_PRIVATE_LIBGCC = yes
diff --git a/arch/arm/cpu/armv7/tegra2/funcmux.c b/arch/arm/cpu/armv7/tegra2/funcmux.c
index 0ef7753..820ba4e9 100644
--- a/arch/arm/cpu/armv7/tegra2/funcmux.c
+++ b/arch/arm/cpu/armv7/tegra2/funcmux.c
@@ -31,11 +31,32 @@ int funcmux_select(enum periph_id id, int config)
switch (id) {
case PERIPH_ID_UART1:
- if (config == FUNCMUX_UART1_IRRX_IRTX) {
+ switch (config) {
+ case FUNCMUX_UART1_IRRX_IRTX:
pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
pinmux_tristate_disable(PINGRP_IRRX);
pinmux_tristate_disable(PINGRP_IRTX);
+ break;
+ case FUNCMUX_UART1_UAA_UAB:
+ pinmux_set_func(PINGRP_UAA, PMUX_FUNC_UARTA);
+ pinmux_set_func(PINGRP_UAB, PMUX_FUNC_UARTA);
+ pinmux_tristate_disable(PINGRP_UAA);
+ pinmux_tristate_disable(PINGRP_UAB);
+ bad_config = 0;
+ break;
+ case FUNCMUX_UART1_GPU:
+ pinmux_set_func(PINGRP_GPU, PMUX_FUNC_UARTA);
+ pinmux_tristate_disable(PINGRP_GPU);
+ bad_config = 0;
+ break;
+ case FUNCMUX_UART1_SDIO1:
+ pinmux_set_func(PINGRP_SDIO1, PMUX_FUNC_UARTA);
+ pinmux_tristate_disable(PINGRP_SDIO1);
+ bad_config = 0;
+ break;
+ }
+ if (!bad_config) {
/*
* Tegra appears to boot with function UARTA pre-
* selected on mux group SDB. If two mux groups are
@@ -106,6 +127,13 @@ int funcmux_select(enum periph_id id, int config)
}
break;
+ case PERIPH_ID_SDMMC1:
+ if (config == FUNCMUX_SDMMC1_SDIO1_4BIT) {
+ pinmux_set_func(PINGRP_SDIO1, PMUX_FUNC_SDIO1);
+ pinmux_tristate_disable(PINGRP_SDIO1);
+ }
+ break;
+
case PERIPH_ID_SDMMC2:
if (config == FUNCMUX_SDMMC2_DTA_DTD_8BIT) {
pinmux_set_func(PINGRP_DTA, PMUX_FUNC_SDIO2);
diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
index abc5b6b..d748dd2 100644
--- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
@@ -19,16 +19,16 @@
#ifndef _CLOCKS_AM33XX_H_
#define _CLOCKS_AM33XX_H_
-#define OSC 24
+#define OSC (V_OSCK/1000000)
/* MAIN PLL Fdll = 550 MHZ, */
#define MPUPLL_M 550
-#define MPUPLL_N 23
+#define MPUPLL_N (OSC-1)
#define MPUPLL_M2 1
/* Core PLL Fdll = 1 GHZ, */
#define COREPLL_M 1000
-#define COREPLL_N 23
+#define COREPLL_N (OSC-1)
#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */
#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */
@@ -40,13 +40,13 @@
* For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below
*/
#define PERPLL_M 960
-#define PERPLL_N 23
+#define PERPLL_N (OSC-1)
#define PERPLL_M2 5
/* DDR Freq is 266 MHZ for now */
/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */
#define DDRPLL_M 266
-#define DDRPLL_N 23
+#define DDRPLL_N (OSC-1)
#define DDRPLL_M2 1
extern void pll_init(void);
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index cd002e6..a027e31 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -53,8 +53,10 @@
/* Reset control */
#ifdef CONFIG_AM33XX
#define PRM_RSTCTRL 0x44E00F00
+#define PRM_RSTST 0x44E00F08
#endif
#define PRM_RSTCTRL_RESET 0x01
+#define PRM_RSTST_WARM_RESET_MASK 0x232
#ifndef __KERNEL_STRICT_NAMES
#ifndef __ASSEMBLY__
@@ -62,7 +64,7 @@
struct cm_wkuppll {
unsigned int wkclkstctrl; /* offset 0x00 */
unsigned int wkctrlclkctrl; /* offset 0x04 */
- unsigned int resv1[1];
+ unsigned int wkgpio0clkctrl; /* offset 0x08 */
unsigned int wkl4wkclkctrl; /* offset 0x0c */
unsigned int resv2[4];
unsigned int idlestdpllmpu; /* offset 0x20 */
@@ -111,34 +113,54 @@ struct cm_perpll {
unsigned int l3clkstctrl; /* offset 0x0c */
unsigned int resv1;
unsigned int cpgmac0clkctrl; /* offset 0x14 */
- unsigned int resv2[4];
+ unsigned int lcdclkctrl; /* offset 0x18 */
+ unsigned int usb0clkctrl; /* offset 0x1C */
+ unsigned int resv2;
+ unsigned int tptc0clkctrl; /* offset 0x24 */
unsigned int emifclkctrl; /* offset 0x28 */
unsigned int ocmcramclkctrl; /* offset 0x2c */
unsigned int gpmcclkctrl; /* offset 0x30 */
- unsigned int resv3[2];
+ unsigned int mcasp0clkctrl; /* offset 0x34 */
+ unsigned int uart5clkctrl; /* offset 0x38 */
unsigned int mmc0clkctrl; /* offset 0x3C */
unsigned int elmclkctrl; /* offset 0x40 */
unsigned int i2c2clkctrl; /* offset 0x44 */
unsigned int i2c1clkctrl; /* offset 0x48 */
unsigned int spi0clkctrl; /* offset 0x4C */
unsigned int spi1clkctrl; /* offset 0x50 */
- unsigned int resv4[3];
+ unsigned int resv3[3];
unsigned int l4lsclkctrl; /* offset 0x60 */
unsigned int l4fwclkctrl; /* offset 0x64 */
- unsigned int resv5[6];
+ unsigned int mcasp1clkctrl; /* offset 0x68 */
+ unsigned int uart1clkctrl; /* offset 0x6C */
+ unsigned int uart2clkctrl; /* offset 0x70 */
+ unsigned int uart3clkctrl; /* offset 0x74 */
+ unsigned int uart4clkctrl; /* offset 0x78 */
+ unsigned int timer7clkctrl; /* offset 0x7C */
unsigned int timer2clkctrl; /* offset 0x80 */
- unsigned int resv6[11];
+ unsigned int timer3clkctrl; /* offset 0x84 */
+ unsigned int timer4clkctrl; /* offset 0x88 */
+ unsigned int resv4[8];
+ unsigned int gpio1clkctrl; /* offset 0xAC */
unsigned int gpio2clkctrl; /* offset 0xB0 */
- unsigned int resv7[7];
+ unsigned int gpio3clkctrl; /* offset 0xB4 */
+ unsigned int resv5;
+ unsigned int tpccclkctrl; /* offset 0xBC */
+ unsigned int dcan0clkctrl; /* offset 0xC0 */
+ unsigned int dcan1clkctrl; /* offset 0xC4 */
+ unsigned int resv6[2];
unsigned int emiffwclkctrl; /* offset 0xD0 */
- unsigned int resv8[2];
+ unsigned int resv7[2];
unsigned int l3instrclkctrl; /* offset 0xDC */
unsigned int l3clkctrl; /* Offset 0xE0 */
- unsigned int resv9[14];
+ unsigned int resv8[4];
+ unsigned int mmc1clkctrl; /* offset 0xF4 */
+ unsigned int mmc2clkctrl; /* offset 0xF8 */
+ unsigned int resv9[8];
unsigned int l4hsclkstctrl; /* offset 0x11C */
unsigned int l4hsclkctrl; /* offset 0x120 */
unsigned int resv10[8];
- unsigned int cpswclkctrl; /* offset 0x144 */
+ unsigned int cpswclkstctrl; /* offset 0x144 */
};
/* Encapsulating Display pll registers */
@@ -213,8 +235,6 @@ struct ctrl_stat {
unsigned int resv1[16];
unsigned int statusreg; /* ofset 0x40 */
};
-
-void init_timer(void);
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL_STRICT_NAMES */
diff --git a/arch/arm/include/asm/arch-am33xx/i2c.h b/arch/arm/include/asm/arch-am33xx/i2c.h
index 366e2bb..32b2258 100644
--- a/arch/arm/include/asm/arch-am33xx/i2c.h
+++ b/arch/arm/include/asm/arch-am33xx/i2c.h
@@ -34,9 +34,9 @@ struct i2c {
unsigned short revnb_lo; /* 0x00 */
unsigned short res1;
unsigned short revnb_hi; /* 0x04 */
- unsigned short res2[13];
- unsigned short sysc; /* 0x20 */
- unsigned short res3;
+ unsigned short res2[5];
+ unsigned short sysc; /* 0x10 */
+ unsigned short res3[9];
unsigned short irqstatus_raw; /* 0x24 */
unsigned short res4;
unsigned short stat; /* 0x28 */
@@ -76,6 +76,6 @@ struct i2c {
};
#define I2C_IP_CLK 48000000
-#define I2C_INTERNAL_SAMLPING_CLK 12000000
+#define I2C_INTERNAL_SAMPLING_CLK 12000000
#endif /* _I2C_H_ */
diff --git a/arch/arm/include/asm/arch-at91/at91_pio.h b/arch/arm/include/asm/arch-at91/at91_pio.h
index 416cabf..0483c98 100644
--- a/arch/arm/include/asm/arch-at91/at91_pio.h
+++ b/arch/arm/include/asm/arch-at91/at91_pio.h
@@ -66,14 +66,50 @@ typedef struct at91_port {
u32 puer; /* 0x64 Pull-up Enable Register */
u32 pusr; /* 0x68 Pad Pull-up Status Register */
u32 reserved4;
+#if defined(CPU_HAS_PIO3)
+ u32 abcdsr1; /* 0x70 Peripheral ABCD Select Register 1 */
+ u32 abcdsr2; /* 0x74 Peripheral ABCD Select Register 2 */
+ u32 reserved5[2];
+ u32 ifscdr; /* 0x80 Input Filter SCLK Disable Register */
+ u32 ifscer; /* 0x84 Input Filter SCLK Enable Register */
+ u32 ifscsr; /* 0x88 Input Filter SCLK Status Register */
+ u32 scdr; /* 0x8C SCLK Divider Debouncing Register */
+ u32 ppddr; /* 0x90 Pad Pull-down Disable Register */
+ u32 ppder; /* 0x94 Pad Pull-down Enable Register */
+ u32 ppdsr; /* 0x98 Pad Pull-down Status Register */
+ u32 reserved6; /* */
+#else
u32 asr; /* 0x70 Select A Register */
u32 bsr; /* 0x74 Select B Register */
u32 absr; /* 0x78 AB Select Status Register */
u32 reserved5[9]; /* */
+#endif
u32 ower; /* 0xA0 Output Write Enable Register */
u32 owdr; /* 0xA4 Output Write Disable Register */
- u32 owsr; /* OxA8 utput Write Status Register */
+ u32 owsr; /* OxA8 Output Write Status Register */
+#if defined(CPU_HAS_PIO3)
+ u32 reserved7; /* */
+ u32 aimer; /* 0xB0 Additional INT Modes Enable Register */
+ u32 aimdr; /* 0xB4 Additional INT Modes Disable Register */
+ u32 aimmr; /* 0xB8 Additional INT Modes Mask Register */
+ u32 reserved8; /* */
+ u32 esr; /* 0xC0 Edge Select Register */
+ u32 lsr; /* 0xC4 Level Select Register */
+ u32 elsr; /* 0xC8 Edge/Level Status Register */
+ u32 reserved9; /* 0xCC */
+ u32 fellsr; /* 0xD0 Falling /Low Level Select Register */
+ u32 rehlsr; /* 0xD4 Rising /High Level Select Register */
+ u32 frlhsr; /* 0xD8 Fall/Rise - Low/High Status Register */
+ u32 reserved10; /* */
+ u32 locksr; /* 0xE0 Lock Status */
+ u32 wpmr; /* 0xE4 Write Protect Mode Register */
+ u32 wpsr; /* 0xE8 Write Protect Status Register */
+ u32 reserved11[5]; /* */
+ u32 schmitt; /* 0x100 Schmitt Trigger Register */
+ u32 reserved12[63];
+#else
u32 reserved6[85];
+#endif
} at91_port_t;
typedef union at91_pio {
@@ -94,6 +130,13 @@ typedef union at91_pio {
#ifdef CONFIG_AT91_GPIO
int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup);
int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup);
+#if defined(CPU_HAS_PIO3)
+int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div);
+int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on);
+int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin);
+#endif
int at91_set_pio_input(unsigned port, unsigned pin, int use_pullup);
int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on);
int at91_set_pio_output(unsigned port, unsigned pin, int value);
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index ac4ddc7..b1e22f2 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -24,6 +24,7 @@
#define DEVICE_NOT_AVAILABLE 0
+#define EXYNOS_CPU_NAME "Exynos"
#define EXYNOS4_ADDR_BASE 0x10000000
/* EXYNOS4 */
@@ -93,29 +94,42 @@ static inline int s5p_get_cpu_rev(void)
static inline void s5p_set_cpu_id(void)
{
- s5p_cpu_id = readl(EXYNOS4_PRO_ID);
- s5p_cpu_id = (0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12));
-
- /*
- * 0xC200: EXYNOS4210 EVT0
- * 0xC210: EXYNOS4210 EVT1
- */
- if (s5p_cpu_id == 0xC200) {
- s5p_cpu_id |= 0x10;
+ unsigned int pro_id = (readl(EXYNOS4_PRO_ID) & 0x00FFF000) >> 12;
+
+ switch (pro_id) {
+ case 0x200:
+ /* Exynos4210 EVT0 */
+ s5p_cpu_id = 0x4210;
s5p_cpu_rev = 0;
- } else if (s5p_cpu_id == 0xC210) {
- s5p_cpu_rev = 1;
+ break;
+ case 0x210:
+ /* Exynos4210 EVT1 */
+ s5p_cpu_id = 0x4210;
+ break;
+ case 0x412:
+ /* Exynos4412 */
+ s5p_cpu_id = 0x4412;
+ break;
+ case 0x520:
+ /* Exynos5250 */
+ s5p_cpu_id = 0x5250;
+ break;
}
}
+static inline char *s5p_get_cpu_name(void)
+{
+ return EXYNOS_CPU_NAME;
+}
+
#define IS_SAMSUNG_TYPE(type, id) \
static inline int cpu_is_##type(void) \
{ \
- return s5p_cpu_id == id ? 1 : 0; \
+ return (s5p_cpu_id >> 12) == id; \
}
-IS_SAMSUNG_TYPE(exynos4, 0xc210)
-IS_SAMSUNG_TYPE(exynos5, 0xc520)
+IS_SAMSUNG_TYPE(exynos4, 0x4)
+IS_SAMSUNG_TYPE(exynos5, 0x5)
#define SAMSUNG_BASE(device, base) \
static inline unsigned int samsung_get_base_##device(void) \
diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h
new file mode 100644
index 0000000..5db25aa
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/periph.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals requiring clock/pinmux configuration. List will
+ * grow with support for more devices getting added.
+ *
+ */
+enum periph_id {
+ PERIPH_ID_SDMMC0,
+ PERIPH_ID_SDMMC1,
+ PERIPH_ID_SDMMC2,
+ PERIPH_ID_SDMMC3,
+ PERIPH_ID_SROMC,
+ PERIPH_ID_UART0,
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+ PERIPH_ID_UART3,
+
+ PERIPH_ID_COUNT,
+ PERIPH_ID_NONE = -1,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h
new file mode 100644
index 0000000..10ea736
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/pinmux.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Abhilash Kesavan <a.kesavan@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_PINMUX_H
+#define __ASM_ARM_ARCH_PINMUX_H
+
+#include "periph.h"
+
+/*
+ * Flags for setting specific configarations of peripherals.
+ * List will grow with support for more devices getting added.
+ */
+enum {
+ PINMUX_FLAG_NONE = 0x00000000,
+
+ /* Flags for eMMC */
+ PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */
+
+ /* Flags for SROM controller */
+ PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */
+ PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */
+};
+
+/**
+ * Configures the pinmux for a particular peripheral.
+ *
+ * Each gpio can be configured in many different ways (4 bits on exynos)
+ * such as "input", "output", "special function", "external interrupt"
+ * etc. This function will configure the peripheral pinmux along with
+ * pull-up/down and drive strength.
+ *
+ * @param peripheral peripheral to be configured
+ * @param flags configure flags
+ * @return 0 if ok, -1 on error (e.g. unsupported peripheral)
+ */
+int exynos_pinmux_config(int peripheral, int flags);
+
+#endif
diff --git a/arch/arm/include/asm/arch-kirkwood/config.h b/arch/arm/include/asm/arch-kirkwood/config.h
index 91164eb..a9499b7 100644
--- a/arch/arm/include/asm/arch-kirkwood/config.h
+++ b/arch/arm/include/asm/arch-kirkwood/config.h
@@ -82,9 +82,15 @@
#ifdef CONFIG_CMD_SF
#define CONFIG_HARD_SPI 1
#define CONFIG_KIRKWOOD_SPI 1
-#define CONFIG_ENV_SPI_BUS 0
-#define CONFIG_ENV_SPI_CS 0
-#define CONFIG_ENV_SPI_MAX_HZ 50000000 /*50Mhz */
+#ifndef CONFIG_ENV_SPI_BUS
+# define CONFIG_ENV_SPI_BUS 0
+#endif
+#ifndef CONFIG_ENV_SPI_CS
+# define CONFIG_ENV_SPI_CS 0
+#endif
+#ifndef CONFIG_ENV_SPI_MAX_HZ
+# define CONFIG_ENV_SPI_MAX_HZ 50000000
+#endif
#endif
/*
diff --git a/arch/arm/include/asm/arch-kirkwood/mpp.h b/arch/arm/include/asm/arch-kirkwood/mpp.h
index b3c090e..8e50ee7 100644
--- a/arch/arm/include/asm/arch-kirkwood/mpp.h
+++ b/arch/arm/include/asm/arch-kirkwood/mpp.h
@@ -312,6 +312,6 @@
#define MPP_MAX 49
-void kirkwood_mpp_conf(unsigned int *mpp_list);
+void kirkwood_mpp_conf(u32 *mpp_list, u32 *mpp_save);
#endif
diff --git a/arch/arm/include/asm/arch-kirkwood/spi.h b/arch/arm/include/asm/arch-kirkwood/spi.h
index 1d5043f..c79bed7 100644
--- a/arch/arm/include/asm/arch-kirkwood/spi.h
+++ b/arch/arm/include/asm/arch-kirkwood/spi.h
@@ -37,6 +37,17 @@ struct kwspi_registers {
u32 irq_mask; /* 0x10614 */
};
+/* They are used to define CONFIG_SYS_KW_SPI_MPP
+ * each of the below #defines selects which mpp is
+ * configured for each SPI signal in spi_claim_bus
+ * bit 0: selects pin for MOSI (MPP1 if 0, MPP6 if 1)
+ * bit 1: selects pin for SCK (MPP2 if 0, MPP10 if 1)
+ * bit 2: selects pin for MISO (MPP3 if 0, MPP11 if 1)
+ */
+#define MOSI_MPP6 (1 << 0)
+#define SCK_MPP10 (1 << 1)
+#define MISO_MPP11 (1 << 2)
+
#define KWSPI_CLKPRESCL_MASK 0x1f
#define KWSPI_CSN_ACT 1 /* Activates serial memory interface */
#define KWSPI_SMEMRDY (1 << 1) /* SerMem Data xfer ready */
diff --git a/arch/arm/include/asm/arch-mx28/regs-common.h b/arch/arm/include/asm/arch-mx28/regs-common.h
index 94b512d..d2e1953 100644
--- a/arch/arm/include/asm/arch-mx28/regs-common.h
+++ b/arch/arm/include/asm/arch-mx28/regs-common.h
@@ -70,7 +70,7 @@ struct mx28_register_32 {
#define mx28_reg_8(name) \
union { \
struct { __mx28_reg_8(name) }; \
- struct mx28_register_32 name##_reg; \
+ struct mx28_register_8 name##_reg; \
};
#define mx28_reg_32(name) \
diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
index afaa068..9979651 100644
--- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
@@ -48,8 +48,8 @@
#define PAD_CTL_SRE_FAST (1 << 0)
#define PAD_CTL_SRE_SLOW (0 << 0)
-#define NO_MUX_I 0x3FF
-#define NO_PAD_I 0x7FF
+#define NO_MUX_I 0
+#define NO_PAD_I 0
enum {
MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0),
diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h
index 457f99d..5683e16 100644
--- a/arch/arm/include/asm/arch-omap3/cpu.h
+++ b/arch/arm/include/asm/arch-omap3/cpu.h
@@ -479,6 +479,8 @@ struct prm {
#define PRM_RSTCTRL 0x48307250
#define PRM_RSTCTRL_RESET 0x04
+#define PRM_RSTST 0x48307258
+#define PRM_RSTST_WARM_RESET_MASK 0x7D2
#define SYSCLKDIV_1 (0x1 << 6)
#define SYSCLKDIV_2 (0x1 << 7)
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index 2a89e56..9e52b12 100644
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -74,4 +74,5 @@ void power_init_r(void);
void dieid_num_r(void);
void do_omap3_emu_romcode_call(u32 service_id, u32 parameters);
void omap3_gp_romcode_call(u32 service_id, u32 parameter);
+u32 warm_reset(void);
#endif
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index 617729c..be20fc0 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -525,6 +525,11 @@ struct omap4_scrm_regs {
#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */
+/* CM_DLL_CTRL */
+#define CM_DLL_CTRL_OVERRIDE_SHIFT 0
+#define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0)
+#define CM_DLL_CTRL_NO_OVERRIDE 0
+
/* CM_CLKMODE_DPLL */
#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11
#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11)
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
index feddb7d..a8c4c60 100644
--- a/arch/arm/include/asm/arch-omap4/cpu.h
+++ b/arch/arm/include/asm/arch-omap4/cpu.h
@@ -178,5 +178,7 @@ struct watchdog {
#define PRM_RSTCTRL PRM_DEVICE_BASE
#define PRM_RSTCTRL_RESET 0x01
+#define PRM_RSTST (PRM_DEVICE_BASE + 0x4)
+#define PRM_RSTST_WARM_RESET_MASK 0x07EA
#endif /* _CPU_H */
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index 47c5883..03bd923 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -112,7 +112,7 @@
#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E
#define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN 0x7C7C7C7C
#define LPDDR2IO_GR10_WD_MASK (3 << 17)
-#define CONTROL_LPDDR2IO_3_VAL 0xA0888C00
+#define CONTROL_LPDDR2IO_3_VAL 0xA0888C0F
/* CONTROL_EFUSE_2 */
#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index c6e3ad2..d633573 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -57,6 +57,8 @@ void init_omap_revision(void);
void do_io_settings(void);
void omap_vc_init(u16 speed_khz);
int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
+u32 warm_reset(void);
+void force_emif_self_refresh(void);
/*
* This is used to verify if the configuration header
* was executed by Romcode prior to control of transfer
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
index f32cf3e..5f1a7aa 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -480,6 +480,13 @@ struct omap5_prcm_regs {
u32 pad217[4];
u32 prm_vc_cfg_i2c_mode; /* 4ae07bb4 */
u32 prm_vc_cfg_i2c_clk; /* 4ae07bb8 */
+ u32 pad218[2];
+ u32 prm_sldo_core_setup; /* 4ae07bc4 */
+ u32 prm_sldo_core_ctrl; /* 4ae07bc8 */
+ u32 prm_sldo_mpu_setup; /* 4ae07bcc */
+ u32 prm_sldo_mpu_ctrl; /* 4ae07bd0 */
+ u32 prm_sldo_mm_setup; /* 4ae07bd4 */
+ u32 prm_sldo_mm_ctrl; /* 4ae07bd8 */
};
/* DPLL register offsets */
@@ -490,6 +497,11 @@ struct omap5_prcm_regs {
#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */
+/* CM_DLL_CTRL */
+#define CM_DLL_CTRL_OVERRIDE_SHIFT 0
+#define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0)
+#define CM_DLL_CTRL_NO_OVERRIDE 0
+
/* CM_CLKMODE_DPLL */
#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11
#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11)
@@ -641,6 +653,9 @@ struct omap5_prcm_regs {
#define VDD_MPU 1000
#define VDD_MM 1000
#define VDD_CORE 1040
+#define VDD_MPU_5432 1150
+#define VDD_MM_5432 1150
+#define VDD_CORE_5432 1150
/* Standard offset is 0.5v expressed in uv */
#define PALMAS_SMPS_BASE_VOLT_UV 500000
diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h
index 8ef17c9..5e62013 100644
--- a/arch/arm/include/asm/arch-omap5/cpu.h
+++ b/arch/arm/include/asm/arch-omap5/cpu.h
@@ -182,5 +182,7 @@ struct watchdog {
#define PRM_RSTCTRL PRM_DEVICE_BASE
#define PRM_RSTCTRL_RESET 0x01
+#define PRM_RSTST (PRM_DEVICE_BASE + 0x4)
+#define PRM_RSTST_WARM_RESET_MASK 0x7FEA
#endif /* _CPU_H */
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index e3f55d2..7f05cb5 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -40,7 +40,7 @@
#define OMAP54XX_L4_PER_BASE 0x48000000
#define OMAP54XX_DRAM_ADDR_SPACE_START 0x80000000
-#define OMAP54XX_DRAM_ADDR_SPACE_END 0xD0000000
+#define OMAP54XX_DRAM_ADDR_SPACE_END 0xFFFFFFFF
#define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START
#define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END
@@ -56,7 +56,8 @@
#define CONTROL_ID_CODE (CTRL_BASE + 0x204)
/* To be verified */
-#define OMAP5_CONTROL_ID_CODE_ES1_0 0x0B85202F
+#define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F
+#define OMAP5432_CONTROL_ID_CODE_ES1_0 0x0B99802F
/* STD_FUSE_PROD_ID_1 */
#define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218)
@@ -178,7 +179,14 @@ struct omap_sys_ctrl_regs {
u32 control_srcomp_east_side; /*0x4A002E7C*/
u32 control_srcomp_west_side; /*0x4A002E80*/
u32 control_srcomp_code_latch; /*0x4A002E84*/
- u32 pad4[3680198];
+ u32 pad4[3679394];
+ u32 control_port_emif1_sdram_config; /*0x4AE0C110*/
+ u32 control_port_emif1_lpddr2_nvm_config; /*0x4AE0C114*/
+ u32 control_port_emif2_sdram_config; /*0x4AE0C118*/
+ u32 pad5[10];
+ u32 control_emif1_sdram_config_ext; /* 0x4AE0C144 */
+ u32 control_emif2_sdram_config_ext; /* 0x4AE0C148 */
+ u32 pad6[789];
u32 control_smart1nopmio_padconf_0; /* 0x4AE0CDA0 */
u32 control_smart1nopmio_padconf_1; /* 0x4AE0CDA4 */
u32 control_padconf_mode; /* 0x4AE0CDA8 */
@@ -233,6 +241,12 @@ struct omap_sys_ctrl_regs {
#define DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL 0x8421084
#define DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL 0x8421000
+#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL 0x7C7C7C6C
+#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL 0x64646464
+#define DDR_IO_0_VREF_CELLS_DDR3_VALUE 0xBAE8C631
+#define DDR_IO_1_VREF_CELLS_DDR3_VALUE 0xBC6318DC
+#define DDR_IO_2_VREF_CELLS_DDR3_VALUE 0x0
+
#define EFUSE_1 0x45145100
#define EFUSE_2 0x45145100
#define EFUSE_3 0x45145100
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 8396a22..74feb90 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -57,6 +57,8 @@ void init_omap_revision(void);
void do_io_settings(void);
void omap_vc_init(u16 speed_khz);
int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
+u32 warm_reset(void);
+void force_emif_self_refresh(void);
/*
* This is used to verify if the configuration header
diff --git a/arch/arm/include/asm/arch-s5pc1xx/cpu.h b/arch/arm/include/asm/arch-s5pc1xx/cpu.h
index 510ead4..2362b99 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/cpu.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/cpu.h
@@ -23,6 +23,7 @@
#ifndef _S5PC1XX_CPU_H
#define _S5PC1XX_CPU_H
+#define S5P_CPU_NAME "S5P"
#define S5PC1XX_ADDR_BASE 0xE0000000
/* S5PC100 */
@@ -71,6 +72,11 @@ static inline void s5p_set_cpu_id(void)
s5p_cpu_id = 0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12);
}
+static inline char *s5p_get_cpu_name(void)
+{
+ return S5P_CPU_NAME;
+}
+
#define IS_SAMSUNG_TYPE(type, id) \
static inline int cpu_is_##type(void) \
{ \
diff --git a/arch/arm/include/asm/arch-spear/clk.h b/arch/arm/include/asm/arch-spear/clk.h
new file mode 100644
index 0000000..a45ec18
--- /dev/null
+++ b/arch/arm/include/asm/arch-spear/clk.h
@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2010
+ * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
+{
+ return 83000000;
+}
diff --git a/arch/arm/include/asm/arch-spear/gpio.h b/arch/arm/include/asm/arch-spear/gpio.h
new file mode 100644
index 0000000..c3697de
--- /dev/null
+++ b/arch/arm/include/asm/arch-spear/gpio.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __ASM_ARCH_SPEAR_GPIO_H
+#define __ASM_ARCH_SPEAR_GPIO_H
+
+enum gpio_direction {
+ GPIO_DIRECTION_IN,
+ GPIO_DIRECTION_OUT,
+};
+
+struct gpio_regs {
+ u32 gpiodata[0x100]; /* 0x000 ... 0x3fc */
+ u32 gpiodir; /* 0x400 */
+};
+
+#define SPEAR_GPIO_COUNT 8
+#define DATA_REG_ADDR(gpio) (1 << (gpio + 2))
+
+#endif /* __ASM_ARCH_SPEAR_GPIO_H */
diff --git a/arch/arm/include/asm/arch-spear/hardware.h b/arch/arm/include/asm/arch-spear/hardware.h
index 818f36c..8150911 100644
--- a/arch/arm/include/asm/arch-spear/hardware.h
+++ b/arch/arm/include/asm/arch-spear/hardware.h
@@ -24,43 +24,68 @@
#ifndef _ASM_ARCH_HARDWARE_H
#define _ASM_ARCH_HARDWARE_H
-#define CONFIG_SYS_USBD_BASE (0xE1100000)
-#define CONFIG_SYS_PLUG_BASE (0xE1200000)
-#define CONFIG_SYS_FIFO_BASE (0xE1000800)
-#define CONFIG_SYS_SMI_BASE (0xFC000000)
-#define CONFIG_SPEAR_SYSCNTLBASE (0xFCA00000)
-#define CONFIG_SPEAR_TIMERBASE (0xFC800000)
-#define CONFIG_SPEAR_MISCBASE (0xFCA80000)
+#define CONFIG_SYS_USBD_BASE 0xE1100000
+#define CONFIG_SYS_PLUG_BASE 0xE1200000
+#define CONFIG_SYS_FIFO_BASE 0xE1000800
+#define CONFIG_SYS_SMI_BASE 0xFC000000
+#define CONFIG_SPEAR_SYSCNTLBASE 0xFCA00000
+#define CONFIG_SPEAR_TIMERBASE 0xFC800000
+#define CONFIG_SPEAR_MISCBASE 0xFCA80000
+#define CONFIG_SPEAR_ETHBASE 0xE0800000
+#define CONFIG_SPEAR_MPMCBASE 0xFC600000
+#define CONFIG_SSP1_BASE 0xD0100000
+#define CONFIG_SSP2_BASE 0xD0180000
+#define CONFIG_SSP3_BASE 0xD8180000
+#define CONFIG_GPIO_BASE 0xD8100000
#define CONFIG_SYS_NAND_CLE (1 << 16)
#define CONFIG_SYS_NAND_ALE (1 << 17)
#if defined(CONFIG_SPEAR600)
-#define CONFIG_SYS_I2C_BASE (0xD0200000)
-#define CONFIG_SPEAR_FSMCBASE (0xD1800000)
+#define CONFIG_SYS_I2C_BASE 0xD0200000
+#define CONFIG_SYS_FSMC_BASE 0xD1800000
+#define CONFIG_FSMC_NAND_BASE 0xD2000000
+
+#define CONFIG_SPEAR_BOOTSTRAPCFG 0xFCA80000
+#define CONFIG_SPEAR_BOOTSTRAPSHFT 16
+#define CONFIG_SPEAR_BOOTSTRAPMASK 0xB
+#define CONFIG_SPEAR_ONLYSNORBOOT 0xA
+#define CONFIG_SPEAR_NORNANDBOOT 0xB
+#define CONFIG_SPEAR_NORNAND8BOOT 0x8
+#define CONFIG_SPEAR_NORNAND16BOOT 0x9
+#define CONFIG_SPEAR_USBBOOT 0x8
+
+#define CONFIG_SPEAR_MPMCREGS 100
#elif defined(CONFIG_SPEAR300)
-#define CONFIG_SYS_I2C_BASE (0xD0180000)
-#define CONFIG_SPEAR_FSMCBASE (0x94000000)
+#define CONFIG_SYS_I2C_BASE 0xD0180000
+#define CONFIG_SYS_FSMC_BASE 0x94000000
#elif defined(CONFIG_SPEAR310)
-#define CONFIG_SYS_I2C_BASE (0xD0180000)
-#define CONFIG_SPEAR_FSMCBASE (0x44000000)
+#define CONFIG_SYS_I2C_BASE 0xD0180000
+#define CONFIG_SYS_FSMC_BASE 0x44000000
#undef CONFIG_SYS_NAND_CLE
#undef CONFIG_SYS_NAND_ALE
#define CONFIG_SYS_NAND_CLE (1 << 17)
#define CONFIG_SYS_NAND_ALE (1 << 16)
-#define CONFIG_SPEAR_EMIBASE (0x4F000000)
-#define CONFIG_SPEAR_RASBASE (0xB4000000)
+#define CONFIG_SPEAR_EMIBASE 0x4F000000
+#define CONFIG_SPEAR_RASBASE 0xB4000000
+
+#define CONFIG_SYS_MACB0_BASE 0xB0000000
+#define CONFIG_SYS_MACB1_BASE 0xB0800000
+#define CONFIG_SYS_MACB2_BASE 0xB1000000
+#define CONFIG_SYS_MACB3_BASE 0xB1800000
#elif defined(CONFIG_SPEAR320)
-#define CONFIG_SYS_I2C_BASE (0xD0180000)
-#define CONFIG_SPEAR_FSMCBASE (0x4C000000)
+#define CONFIG_SYS_I2C_BASE 0xD0180000
+#define CONFIG_SYS_FSMC_BASE 0x4C000000
+
+#define CONFIG_SPEAR_EMIBASE 0x40000000
+#define CONFIG_SPEAR_RASBASE 0xB3000000
-#define CONFIG_SPEAR_EMIBASE (0x40000000)
-#define CONFIG_SPEAR_RASBASE (0xB3000000)
+#define CONFIG_SYS_MACB0_BASE 0xAA000000
#endif
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-spear/spr_defs.h b/arch/arm/include/asm/arch-spear/spr_defs.h
index fa8412c..71d64a1 100644
--- a/arch/arm/include/asm/arch-spear/spr_defs.h
+++ b/arch/arm/include/asm/arch-spear/spr_defs.h
@@ -28,6 +28,23 @@ extern int spear_board_init(ulong);
extern void setfreq(unsigned int, unsigned int);
extern unsigned int setfreq_sz;
+void plat_ddr_init(void);
+void soc_init(void);
+void spear_late_init(void);
+void plat_late_init(void);
+
+int snor_boot_selected(void);
+int nand_boot_selected(void);
+int pnor_boot_selected(void);
+int usb_boot_selected(void);
+int uart_boot_selected(void);
+int tftp_boot_selected(void);
+int i2c_boot_selected(void);
+int spi_boot_selected(void);
+int mmc_boot_selected(void);
+
+extern u32 mpmc_conf_vals[];
+
struct chip_data {
int cpufreq;
int dramfreq;
@@ -43,4 +60,10 @@ struct chip_data {
#define MAC_OFF 0x2
#define MAC_LEN 0x6
+#define PNOR_WIDTH_8 0
+#define PNOR_WIDTH_16 1
+#define PNOR_WIDTH_32 2
+#define PNOR_WIDTH_NUM 3
+#define PNOR_WIDTH_SEARCH 0xff
+
#endif
diff --git a/arch/arm/include/asm/arch-spear/spr_gpt.h b/arch/arm/include/asm/arch-spear/spr_gpt.h
index 965b5ab..d95ba52 100644
--- a/arch/arm/include/asm/arch-spear/spr_gpt.h
+++ b/arch/arm/include/asm/arch-spear/spr_gpt.h
@@ -79,7 +79,7 @@ struct gpt_regs {
#define GPT_FREE_RUNNING 0xFFFF
/* Timer, HZ specific defines */
-#define CONFIG_SPEAR_HZ (1000)
-#define CONFIG_SPEAR_HZ_CLOCK (8300000)
+#define CONFIG_SPEAR_HZ 1000
+#define CONFIG_SPEAR_HZ_CLOCK 8300000
#endif
diff --git a/arch/arm/include/asm/arch-spear/spr_misc.h b/arch/arm/include/asm/arch-spear/spr_misc.h
index 8b96d9b..5f67a5f 100644
--- a/arch/arm/include/asm/arch-spear/spr_misc.h
+++ b/arch/arm/include/asm/arch-spear/spr_misc.h
@@ -37,7 +37,7 @@ struct misc_regs {
u32 amba_clk_cfg; /* 0x24 */
u32 periph_clk_cfg; /* 0x28 */
u32 periph1_clken; /* 0x2C */
- u32 periph2_clken; /* 0x30 */
+ u32 soc_core_id; /* 0x30 */
u32 ras_clken; /* 0x34 */
u32 periph1_rst; /* 0x38 */
u32 periph2_rst; /* 0x3C */
@@ -46,7 +46,7 @@ struct misc_regs {
u32 prsc2_clk_cfg; /* 0x48 */
u32 prsc3_clk_cfg; /* 0x4C */
u32 amem_cfg_ctrl; /* 0x50 */
- u32 port_cfg_ctrl; /* 0x54 */
+ u32 expi_clk_cfg; /* 0x54 */
u32 reserved_1; /* 0x58 */
u32 clcd_synth_clk; /* 0x5C */
u32 irda_synth_clk; /* 0x60 */
@@ -101,6 +101,37 @@ struct misc_regs {
u32 ras_gpp2_out; /* 0x800C */
};
+/* SYNTH_CLK value*/
+#define SYNTH23 0x00020003
+
+/* PLLx_FRQ value */
+#if defined(CONFIG_SPEAR3XX)
+#define FREQ_332 0xA600010C
+#define FREQ_266 0x8500010C
+#elif defined(CONFIG_SPEAR600)
+#define FREQ_332 0xA600010F
+#define FREQ_266 0x8500010F
+#endif
+
+/* PLL_CTR_REG */
+#define MEM_CLK_SEL_MSK 0x70000000
+#define MEM_CLK_HCLK 0x00000000
+#define MEM_CLK_2HCLK 0x10000000
+#define MEM_CLK_PLL2 0x30000000
+
+#define EXPI_CLK_CFG_LOW_COMPR 0x2000
+#define EXPI_CLK_CFG_CLK_EN 0x0400
+#define EXPI_CLK_CFG_RST 0x0200
+#define EXPI_CLK_SYNT_EN 0x0010
+#define EXPI_CLK_CFG_SEL_PLL2 0x0004
+#define EXPI_CLK_CFG_INT_CLK_EN 0x0001
+
+#define PLL2_CNTL_6UA 0x1c00
+#define PLL2_CNTL_SAMPLE 0x0008
+#define PLL2_CNTL_ENABLE 0x0004
+#define PLL2_CNTL_RESETN 0x0002
+#define PLL2_CNTL_LOCK 0x0001
+
/* AUTO_CFG_REG value */
#define MISC_SOCCFGMSK 0x0000003F
#define MISC_SOCCFG30 0x0000000C
@@ -110,6 +141,8 @@ struct misc_regs {
/* PERIPH_CLK_CFG value */
#define MISC_GPT3SYNTH 0x00000400
#define MISC_GPT4SYNTH 0x00000800
+#define CONFIG_SPEAR_UART48M 0
+#define CONFIG_SPEAR_UARTCLKMSK (0x1 << 4)
/* PRSC_CLK_CFG value */
/*
@@ -126,5 +159,115 @@ struct misc_regs {
/* PERIPH1_CLKEN, PERIPH1_RST value */
#define MISC_USBDENB 0x01000000
+#define MISC_ETHENB 0x00800000
+#define MISC_SMIENB 0x00200000
+#define MISC_GPT3ENB 0x00010000
+#define MISC_GPIO4ENB 0x00002000
+#define MISC_GPT2ENB 0x00000800
+#define MISC_FSMCENB 0x00000200
+#define MISC_I2CENB 0x00000080
+#define MISC_SSP2ENB 0x00000070
+#define MISC_UART0ENB 0x00000008
+
+/* PERIPH_CLK_CFG */
+#define XTALTIMEEN 0x00000001
+#define PLLTIMEEN 0x00000002
+#define CLCDCLK_SYNTH 0x00000000
+#define CLCDCLK_48MHZ 0x00000004
+#define CLCDCLK_EXT 0x00000008
+#define UARTCLK_MASK (0x1 << 4)
+#define UARTCLK_48MHZ 0x00000000
+#define UARTCLK_SYNTH 0x00000010
+#define IRDACLK_48MHZ 0x00000000
+#define IRDACLK_SYNTH 0x00000020
+#define IRDACLK_EXT 0x00000040
+#define RTC_DISABLE 0x00000080
+#define GPT1CLK_48MHZ 0x00000000
+#define GPT1CLK_SYNTH 0x00000100
+#define GPT2CLK_48MHZ 0x00000000
+#define GPT2CLK_SYNTH 0x00000200
+#define GPT3CLK_48MHZ 0x00000000
+#define GPT3CLK_SYNTH 0x00000400
+#define GPT4CLK_48MHZ 0x00000000
+#define GPT4CLK_SYNTH 0x00000800
+#define GPT5CLK_48MHZ 0x00000000
+#define GPT5CLK_SYNTH 0x00001000
+#define GPT1_FREEZE 0x00002000
+#define GPT2_FREEZE 0x00004000
+#define GPT3_FREEZE 0x00008000
+#define GPT4_FREEZE 0x00010000
+#define GPT5_FREEZE 0x00020000
+
+/* PERIPH1_CLKEN bits */
+#define PERIPH_ARM1_WE 0x00000001
+#define PERIPH_ARM1 0x00000002
+#define PERIPH_ARM2 0x00000004
+#define PERIPH_UART1 0x00000008
+#define PERIPH_UART2 0x00000010
+#define PERIPH_SSP1 0x00000020
+#define PERIPH_SSP2 0x00000040
+#define PERIPH_I2C 0x00000080
+#define PERIPH_JPEG 0x00000100
+#define PERIPH_FSMC 0x00000200
+#define PERIPH_FIRDA 0x00000400
+#define PERIPH_GPT4 0x00000800
+#define PERIPH_GPT5 0x00001000
+#define PERIPH_GPIO4 0x00002000
+#define PERIPH_SSP3 0x00004000
+#define PERIPH_ADC 0x00008000
+#define PERIPH_GPT3 0x00010000
+#define PERIPH_RTC 0x00020000
+#define PERIPH_GPIO3 0x00040000
+#define PERIPH_DMA 0x00080000
+#define PERIPH_ROM 0x00100000
+#define PERIPH_SMI 0x00200000
+#define PERIPH_CLCD 0x00400000
+#define PERIPH_GMAC 0x00800000
+#define PERIPH_USBD 0x01000000
+#define PERIPH_USBH1 0x02000000
+#define PERIPH_USBH2 0x04000000
+#define PERIPH_MPMC 0x08000000
+#define PERIPH_RAMW 0x10000000
+#define PERIPH_MPMC_EN 0x20000000
+#define PERIPH_MPMC_WE 0x40000000
+#define PERIPH_MPMCMSK 0x60000000
+
+#define PERIPH_CLK_ALL 0x0FFFFFF8
+#define PERIPH_RST_ALL 0x00000004
+
+/* DDR_PAD values */
+#define DDR_PAD_CNF_MSK 0x0000ffff
+#define DDR_PAD_SW_CONF 0x00060000
+#define DDR_PAD_SSTL_SEL 0x00000001
+#define DDR_PAD_DRAM_TYPE 0x00008000
+
+/* DDR_COMP values */
+#define DDR_COMP_ACCURATE 0x00000010
+
+/* SoC revision stuff */
+#define SOC_PRI_SHFT 16
+#define SOC_SEC_SHFT 8
+
+/* Revision definitions */
+#define SOC_SPEAR_NA 0
+
+/*
+ * The definitons have started from
+ * 101 for SPEAr6xx
+ * 201 for SPEAr3xx
+ * 301 for SPEAr13xx
+ */
+#define SOC_SPEAR600_AA 101
+#define SOC_SPEAR600_AB 102
+#define SOC_SPEAR600_BA 103
+#define SOC_SPEAR600_BB 104
+#define SOC_SPEAR600_BC 105
+#define SOC_SPEAR600_BD 106
+
+#define SOC_SPEAR300 201
+#define SOC_SPEAR310 202
+#define SOC_SPEAR320 203
+
+extern int get_socrev(void);
#endif
diff --git a/arch/arm/include/asm/arch-spear/spr_nand.h b/arch/arm/include/asm/arch-spear/spr_nand.h
deleted file mode 100644
index 2b63dc7..0000000
--- a/arch/arm/include/asm/arch-spear/spr_nand.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * (C) Copyright 2009
- * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __SPR_NAND_H__
-#define __SPR_NAND_H__
-
-struct fsmc_regs {
- u32 reserved_1[0x10];
- u32 genmemctrl_pc;
- u32 reserved_2;
- u32 genmemctrl_comm;
- u32 genmemctrl_attrib;
- u32 reserved_3;
- u32 genmemctrl_ecc;
-};
-
-/* genmemctrl_pc register definitions */
-#define FSMC_RESET (1 << 0)
-#define FSMC_WAITON (1 << 1)
-#define FSMC_ENABLE (1 << 2)
-#define FSMC_DEVTYPE_NAND (1 << 3)
-#define FSMC_DEVWID_8 (0 << 4)
-#define FSMC_DEVWID_16 (1 << 4)
-#define FSMC_ECCEN (1 << 6)
-#define FSMC_ECCPLEN_512 (0 << 7)
-#define FSMC_ECCPLEN_256 (1 << 7)
-#define FSMC_TCLR_1 (1 << 9)
-#define FSMC_TAR_1 (1 << 13)
-
-/* genmemctrl_comm register definitions */
-#define FSMC_TSET_0 (0 << 0)
-#define FSMC_TWAIT_6 (6 << 8)
-#define FSMC_THOLD_4 (4 << 16)
-#define FSMC_THIZ_1 (1 << 24)
-
-extern int spear_nand_init(struct nand_chip *nand);
-#endif
diff --git a/arch/arm/include/asm/arch-spear/spr_smi.h b/arch/arm/include/asm/arch-spear/spr_smi.h
deleted file mode 100644
index 06df745..0000000
--- a/arch/arm/include/asm/arch-spear/spr_smi.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * (C) Copyright 2009
- * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef SPR_SMI_H
-#define SPR_SMI_H
-
-/* 0xF800.0000 . 0xFBFF.FFFF 64MB SMI (Serial Flash Mem) */
-/* 0xFC00.0000 . 0xFC1F.FFFF 2MB SMI (Serial Flash Reg.) */
-
-#define FLASH_START_ADDRESS CONFIG_SYS_FLASH_BASE
-#define FLASH_BANK_SIZE CONFIG_SYS_FLASH_BANK_SIZE
-
-#define SMIBANK0_BASE (FLASH_START_ADDRESS)
-#define SMIBANK1_BASE (SMIBANK0_BASE + FLASH_BANK_SIZE)
-#define SMIBANK2_BASE (SMIBANK1_BASE + FLASH_BANK_SIZE)
-#define SMIBANK3_BASE (SMIBANK2_BASE + FLASH_BANK_SIZE)
-
-#define BANK0 0
-#define BANK1 1
-#define BANK2 2
-#define BANK3 3
-
-struct smi_regs {
- u32 smi_cr1;
- u32 smi_cr2;
- u32 smi_sr;
- u32 smi_tr;
- u32 smi_rr;
-};
-
-/* CONTROL REG 1 */
-#define BANK_EN 0x0000000F /* enables all banks */
-#define DSEL_TIME 0x00000060 /* Deselect time */
-#define PRESCAL5 0x00000500 /* AHB_CK prescaling value */
-#define PRESCALA 0x00000A00 /* AHB_CK prescaling value */
-#define PRESCAL3 0x00000300 /* AHB_CK prescaling value */
-#define PRESCAL4 0x00000400 /* AHB_CK prescaling value */
-#define SW_MODE 0x10000000 /* enables SW Mode */
-#define WB_MODE 0x20000000 /* Write Burst Mode */
-#define FAST_MODE 0x00008000 /* Fast Mode */
-#define HOLD1 0x00010000
-
-/* CONTROL REG 2 */
-#define RD_STATUS_REG 0x00000400 /* reads status reg */
-#define WE 0x00000800 /* Write Enable */
-#define BANK0_SEL 0x00000000 /* Select Banck0 */
-#define BANK1_SEL 0x00001000 /* Select Banck1 */
-#define BANK2_SEL 0x00002000 /* Select Banck2 */
-#define BANK3_SEL 0x00003000 /* Select Banck3 */
-#define BANKSEL_SHIFT 12
-#define SEND 0x00000080 /* Send data */
-#define TX_LEN_1 0x00000001 /* data length = 1 byte */
-#define TX_LEN_2 0x00000002 /* data length = 2 byte */
-#define TX_LEN_3 0x00000003 /* data length = 3 byte */
-#define TX_LEN_4 0x00000004 /* data length = 4 byte */
-#define RX_LEN_1 0x00000010 /* data length = 1 byte */
-#define RX_LEN_2 0x00000020 /* data length = 2 byte */
-#define RX_LEN_3 0x00000030 /* data length = 3 byte */
-#define RX_LEN_4 0x00000040 /* data length = 4 byte */
-#define TFIE 0x00000100 /* Tx Flag Interrupt Enable */
-#define WCIE 0x00000200 /* WCF Interrupt Enable */
-
-/* STATUS_REG */
-#define INT_WCF_CLR 0xFFFFFDFF /* clear: WCF clear */
-#define INT_TFF_CLR 0xFFFFFEFF /* clear: TFF clear */
-#define WIP_BIT 0x00000001 /* WIP Bit of SPI SR */
-#define WEL_BIT 0x00000002 /* WEL Bit of SPI SR */
-#define RSR 0x00000005 /* Read Status regiser */
-#define TFF 0x00000100 /* Transfer Finished FLag */
-#define WCF 0x00000200 /* Transfer Finished FLag */
-#define ERF1 0x00000400 /* Error Flag 1 */
-#define ERF2 0x00000800 /* Error Flag 2 */
-#define WM0 0x00001000 /* WM Bank 0 */
-#define WM1 0x00002000 /* WM Bank 1 */
-#define WM2 0x00004000 /* WM Bank 2 */
-#define WM3 0x00008000 /* WM Bank 3 */
-#define WM_SHIFT 12
-
-/* TR REG */
-#define READ_ID 0x0000009F /* Read Identification */
-#define BULK_ERASE 0x000000C7 /* BULK erase */
-#define SECTOR_ERASE 0x000000D8 /* SECTOR erase */
-#define WRITE_ENABLE 0x00000006 /* Wenable command to FLASH */
-
-struct flash_dev {
- u32 density;
- ulong size;
- ushort sector_count;
-};
-
-#define SFLASH_PAGE_SIZE 0x100 /* flash page size */
-#define XFER_FINISH_TOUT 2 /* xfer finish timeout */
-#define WMODE_TOUT 2 /* write enable timeout */
-
-#endif
diff --git a/arch/arm/include/asm/arch-spear/spr_ssp.h b/arch/arm/include/asm/arch-spear/spr_ssp.h
new file mode 100644
index 0000000..4f144ee
--- /dev/null
+++ b/arch/arm/include/asm/arch-spear/spr_ssp.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SPR_SSP_H
+#define _SPR_SSP_H
+
+struct ssp_regs {
+ u32 sspcr0;
+ u32 sspcr1;
+ u32 sspdr;
+ u32 sspsr;
+ u32 sspcpsr;
+ u32 sspimsc;
+ u32 sspicr;
+ u32 sspdmacr;
+};
+
+#define SSPCR0_FRF_MOT_SPI 0x0000
+#define SSPCR0_DSS_16BITS 0x000f
+
+#define SSPCR1_SSE 0x0002
+
+#define SSPSR_TNF 0x2
+#define SSPSR_TFE 0x1
+
+#endif
diff --git a/arch/arm/include/asm/arch-spear/spr_syscntl.h b/arch/arm/include/asm/arch-spear/spr_syscntl.h
index 3c92f09..2393d89 100644
--- a/arch/arm/include/asm/arch-spear/spr_syscntl.h
+++ b/arch/arm/include/asm/arch-spear/spr_syscntl.h
@@ -21,6 +21,9 @@
* MA 02111-1307 USA
*/
+#ifndef __SYSCTRL_H
+#define __SYSCTRL_H
+
struct syscntl_regs {
u32 scctrl;
u32 scsysstat;
@@ -36,3 +39,14 @@ struct syscntl_regs {
const u32 scperclken;
const u32 scperstat;
};
+
+#define MODE_SHIFT 0x00000003
+
+#define NORMAL 0x00000004
+#define SLOW 0x00000002
+#define DOZE 0x00000001
+#define SLEEP 0x00000000
+
+#define PLL_TIM 0x01FFFFFF
+
+#endif
diff --git a/arch/arm/include/asm/arch-spear/spr_xloader_table.h b/arch/arm/include/asm/arch-spear/spr_xloader_table.h
deleted file mode 100644
index 7e3da18..0000000
--- a/arch/arm/include/asm/arch-spear/spr_xloader_table.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2009
- * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SPR_XLOADER_TABLE_H
-#define _SPR_XLOADER_TABLE_H
-
-#define XLOADER_TABLE_VERSION_1_1 2
-#define XLOADER_TABLE_VERSION_1_2 3
-
-#define XLOADER_TABLE_ADDRESS 0xD2801FF0
-
-#define DDRMOBILE 1
-#define DDR2 2
-
-#define REV_BA 1
-#define REV_AA 2
-#define REV_AB 3
-
-struct xloader_table_1_1 {
- unsigned short ddrfreq;
- unsigned char ddrsize;
- unsigned char ddrtype;
-
- unsigned char soc_rev;
-} __attribute__ ((packed));
-
-struct xloader_table_1_2 {
- unsigned const char *version;
-
- unsigned short ddrfreq;
- unsigned char ddrsize;
- unsigned char ddrtype;
-
- unsigned char soc_rev;
-} __attribute__ ((packed));
-
-union table_contents {
- struct xloader_table_1_1 table_1_1;
- struct xloader_table_1_2 table_1_2;
-};
-
-struct xloader_table {
- unsigned char table_version;
- union table_contents table;
-} __attribute__ ((packed));
-
-#endif
diff --git a/arch/arm/include/asm/arch-tegra2/clock.h b/arch/arm/include/asm/arch-tegra2/clock.h
index 1d3ae38..ff83bbf 100644
--- a/arch/arm/include/asm/arch-tegra2/clock.h
+++ b/arch/arm/include/asm/arch-tegra2/clock.h
@@ -186,8 +186,9 @@ enum periph_id {
/* Mask value for a clock (within PERIPH_REG(id)) */
#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
-/* return 1 if a PLL ID is in range */
-#define clock_id_isvalid(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT)
+/* return 1 if a PLL ID is in range, and not a simple PLL */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && \
+ (id) < CLOCK_ID_FIRST_SIMPLE)
/* PLL stabilization delay in usec */
#define CLOCK_PLL_STABLE_DELAY_US 300
diff --git a/arch/arm/include/asm/arch-tegra2/funcmux.h b/arch/arm/include/asm/arch-tegra2/funcmux.h
index ae73c72..b16c496 100644
--- a/arch/arm/include/asm/arch-tegra2/funcmux.h
+++ b/arch/arm/include/asm/arch-tegra2/funcmux.h
@@ -30,6 +30,9 @@ enum {
/* UART configs */
FUNCMUX_UART1_IRRX_IRTX = 0,
+ FUNCMUX_UART1_UAA_UAB,
+ FUNCMUX_UART1_GPU,
+ FUNCMUX_UART1_SDIO1,
FUNCMUX_UART2_IRDA = 0,
FUNCMUX_UART4_GMC = 0,
@@ -41,6 +44,7 @@ enum {
FUNCMUX_I2C3_DTF = 0,
/* SDMMC configs */
+ FUNCMUX_SDMMC1_SDIO1_4BIT = 0,
FUNCMUX_SDMMC2_DTA_DTD_8BIT = 0,
FUNCMUX_SDMMC3_SDB_4BIT = 0,
FUNCMUX_SDMMC3_SDB_SLXA_8BIT,
diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h b/arch/arm/include/asm/arch-tegra2/gpio.h
index 41e66fe..40ddb02 100644
--- a/arch/arm/include/asm/arch-tegra2/gpio.h
+++ b/arch/arm/include/asm/arch-tegra2/gpio.h
@@ -2,6 +2,7 @@
* Copyright (c) 2011, Google Inc. All rights reserved.
* See file CREDITS for list of people who contributed to this
* project.
+ * Portions Copyright 2011-2012 NVIDIA Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -19,8 +20,8 @@
* MA 02111-1307 USA
*/
-#ifndef _TEGRA2_GPIO_H_
-#define _TEGRA2_GPIO_H_
+#ifndef _TEGRA_GPIO_H_
+#define _TEGRA_GPIO_H_
/*
* The Tegra 2x GPIO controller has 224 GPIOs arranged in 7 banks of 4 ports,
@@ -286,4 +287,4 @@ enum gpio_pin {
void gpio_info(void);
#define gpio_status() gpio_info()
-#endif /* TEGRA2_GPIO_H_ */
+#endif /* TEGRA_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-tegra2/pinmux.h b/arch/arm/include/asm/arch-tegra2/pinmux.h
index 469d742..03fa7ca 100644
--- a/arch/arm/include/asm/arch-tegra2/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra2/pinmux.h
@@ -67,7 +67,7 @@ enum pmux_pingrp {
PINGRP_KBCF,
PINGRP_GMA,
PINGRP_GMC,
- PINGRP_SDMMC1,
+ PINGRP_SDIO1,
PINGRP_OWC,
/* 32: APB_MISC_PP_TRISTATE_REG_B_0 */
diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h b/arch/arm/include/asm/arch-tegra2/tegra2.h
index d4ada10..3c8d8a8 100644
--- a/arch/arm/include/asm/arch-tegra2/tegra2.h
+++ b/arch/arm/include/asm/arch-tegra2/tegra2.h
@@ -60,6 +60,10 @@ struct timerus {
/* Address at which WB code runs, it must not overlap Bootrom's IRAM usage */
#define AP20_WB_RUN_ADDRESS 0x40020000
+#define NVBOOTINFOTABLE_BCTSIZE 0x38 /* BCT size in BIT in IRAM */
+#define NVBOOTINFOTABLE_BCTPTR 0x3C /* BCT pointer in BIT in IRAM */
+#define BCT_ODMDATA_OFFSET 4068 /* 12 bytes from end of BCT */
+
/* These are the available SKUs (product types) for Tegra */
enum {
SKU_ID_T20 = 0x8,
diff --git a/arch/arm/include/asm/arch-tegra2/tegra2_spi.h b/arch/arm/include/asm/arch-tegra2/tegra_spi.h
index ceec428..892d90c 100644
--- a/arch/arm/include/asm/arch-tegra2/tegra2_spi.h
+++ b/arch/arm/include/asm/arch-tegra2/tegra_spi.h
@@ -1,7 +1,7 @@
/*
* NVIDIA Tegra2 SPI-FLASH controller
*
- * Copyright 2010-2011 NVIDIA Corporation
+ * Copyright 2010-2012 NVIDIA Corporation
*
* This software may be used and distributed according to the
* terms of the GNU Public License, Version 2, incorporated
@@ -22,8 +22,8 @@
* MA 02111-1307 USA
*/
-#ifndef _TEGRA2_SPI_H_
-#define _TEGRA2_SPI_H_
+#ifndef _TEGRA_SPI_H_
+#define _TEGRA_SPI_H_
#include <asm/types.h>
@@ -72,5 +72,4 @@ struct spi_tegra {
#define SPI_TIMEOUT 1000
#define TEGRA2_SPI_MAX_FREQ 52000000
-
-#endif /* _TEGRA2_SPI_H_ */
+#endif /* _TEGRA_SPI_H_ */
diff --git a/arch/arm/include/asm/arch-tegra2/uart-spi-switch.h b/arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
index e4503b1..82ac180 100644
--- a/arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
+++ b/arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
@@ -29,7 +29,7 @@
* time! If the board file provides this, the board config will declare it.
* Let this be a lesson for others.
*/
-void pinmux_select_uart(NS16550_t regs);
+void pinmux_select_uart(void);
/*
* Signal that we are about the use the SPI bus.
@@ -38,7 +38,7 @@ void pinmux_select_spi(void);
#else /* not CONFIG_SPI_UART_SWITCH */
-static inline void pinmux_select_uart(NS16550_t regs) {}
+static inline void pinmux_select_uart(void) {}
static inline void pinmux_select_spi(void) {}
#endif
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index f1e3ad2..674c3de 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -471,6 +471,49 @@
#define EMIF_REG_DDR_PHY_CTRL_2_SHIFT 0
#define EMIF_REG_DDR_PHY_CTRL_2_MASK (0xffffffff << 0)
+/*EMIF_READ_WRITE_LEVELING_CONTROL*/
+#define EMIF_REG_RDWRLVLFULL_START_SHIFT 31
+#define EMIF_REG_RDWRLVLFULL_START_MASK (1 << 31)
+#define EMIF_REG_RDWRLVLINC_PRE_SHIFT 24
+#define EMIF_REG_RDWRLVLINC_PRE_MASK (0x7F << 24)
+#define EMIF_REG_RDLVLINC_INT_SHIFT 16
+#define EMIF_REG_RDLVLINC_INT_MASK (0xFF << 16)
+#define EMIF_REG_RDLVLGATEINC_INT_SHIFT 8
+#define EMIF_REG_RDLVLGATEINC_INT_MASK (0xFF << 8)
+#define EMIF_REG_WRLVLINC_INT_SHIFT 0
+#define EMIF_REG_WRLVLINC_INT_MASK (0xFF << 0)
+
+/*EMIF_READ_WRITE_LEVELING_RAMP_CONTROL*/
+#define EMIF_REG_RDWRLVL_EN_SHIFT 31
+#define EMIF_REG_RDWRLVL_EN_MASK (1 << 31)
+#define EMIF_REG_RDWRLVLINC_RMP_PRE_SHIFT 24
+#define EMIF_REG_RDWRLVLINC_RMP_PRE_MASK (0x7F << 24)
+#define EMIF_REG_RDLVLINC_RMP_INT_SHIFT 16
+#define EMIF_REG_RDLVLINC_RMP_INT_MASK (0xFF << 16)
+#define EMIF_REG_RDLVLGATEINC_RMP_INT_SHIFT 8
+#define EMIF_REG_RDLVLGATEINC_RMP_INT_MASK (0xFF << 8)
+#define EMIF_REG_WRLVLINC_RMP_INT_SHIFT 0
+#define EMIF_REG_WRLVLINC_RMP_INT_MASK (0xFF << 0)
+
+/*EMIF_READ_WRITE_LEVELING_RAMP_WINDOW*/
+#define EMIF_REG_RDWRLVLINC_RMP_WIN_SHIFT 0
+#define EMIF_REG_RDWRLVLINC_RMP_WIN_MASK (0x1FFF << 0)
+
+/*Leveling Fields */
+#define DDR3_WR_LVL_INT 0x73
+#define DDR3_RD_LVL_INT 0x33
+#define DDR3_RD_LVL_GATE_INT 0x59
+#define RD_RW_LVL_INC_PRE 0x0
+#define DDR3_FULL_LVL (1 << EMIF_REG_RDWRLVL_EN_SHIFT)
+
+#define DDR3_INC_LVL ((DDR3_WR_LVL_INT << EMIF_REG_WRLVLINC_INT_SHIFT) \
+ | (DDR3_RD_LVL_GATE_INT << EMIF_REG_RDLVLGATEINC_INT_SHIFT) \
+ | (DDR3_RD_LVL_INT << EMIF_REG_RDLVLINC_RMP_INT_SHIFT) \
+ | (RD_RW_LVL_INC_PRE << EMIF_REG_RDWRLVLINC_RMP_PRE_SHIFT))
+
+#define SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES 0x0000C1A7
+#define SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES 0x000001A7
+
/* DMM */
#define DMM_BASE 0x4E000040
@@ -650,6 +693,7 @@ struct dmm_lisa_map_regs {
};
extern const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG];
+extern const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG];
#define CS0 0
#define CS1 1
@@ -1073,6 +1117,10 @@ struct emif_regs {
u32 emif_ddr_ext_phy_ctrl_3;
u32 emif_ddr_ext_phy_ctrl_4;
u32 emif_ddr_ext_phy_ctrl_5;
+ u32 emif_rd_wr_lvl_rmp_win;
+ u32 emif_rd_wr_lvl_rmp_ctl;
+ u32 emif_rd_wr_lvl_ctl;
+ u32 emif_rd_wr_exec_thresh;
};
/* assert macros */
@@ -1093,11 +1141,13 @@ void emif_get_device_timings(u32 emif_nr,
const struct lpddr2_device_timings **cs1_device_timings);
#endif
+void do_ext_phy_settings(u32 base, const struct emif_regs *regs);
+
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
extern u32 *const T_num;
extern u32 *const T_den;
extern u32 *const emif_sizes;
#endif
-
+void config_data_eye_leveling_samples(u32 emif_base);
#endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 459b6b1..4e95eee 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -136,4 +136,5 @@ static inline u32 omap_revision(void)
/* omap5 */
#define OMAP5430_SILICON_ID_INVALID 0
#define OMAP5430_ES1_0 0x54300100
+#define OMAP5432_ES1_0 0x54320100
#endif /* _OMAP_COMMON_H_ */
diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h
index 4ca75f9..9f3cae5 100644
--- a/arch/arm/include/asm/u-boot-arm.h
+++ b/arch/arm/include/asm/u-boot-arm.h
@@ -52,6 +52,7 @@ void cpu_init_cp15(void);
/* cpu/.../arch/cpu.c */
int arch_cpu_init(void);
int arch_misc_init(void);
+int arch_early_init_r(void);
/* board/.../... */
int board_init(void);
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 024646c..f21591d 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -500,6 +500,10 @@ void board_init_r(gd_t *id, ulong dest_addr)
malloc_start = dest_addr - TOTAL_MALLOC_LEN;
mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
+#ifdef CONFIG_ARCH_EARLY_INIT_R
+ arch_early_init_r();
+#endif
+
#if !defined(CONFIG_SYS_NO_FLASH)
puts("Flash: ");
diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c
index e6c3eae..939de10 100644
--- a/arch/arm/lib/cache-cp15.c
+++ b/arch/arm/lib/cache-cp15.c
@@ -115,17 +115,17 @@ static void cache_disable(uint32_t cache_bit)
{
uint32_t reg;
+ reg = get_cr();
+ cp_delay();
+
if (cache_bit == CR_C) {
/* if cache isn;t enabled no need to disable */
- reg = get_cr();
if ((reg & CR_C) != CR_C)
return;
/* if disabling data cache, disable mmu too */
cache_bit |= CR_M;
flush_dcache_all();
}
- reg = get_cr();
- cp_delay();
set_cr(reg & ~cache_bit);
}
#endif
diff --git a/arch/arm/lib/eabi_compat.c b/arch/arm/lib/eabi_compat.c
index 2028dbd..44eebe0 100644
--- a/arch/arm/lib/eabi_compat.c
+++ b/arch/arm/lib/eabi_compat.c
@@ -13,7 +13,8 @@
int raise (int signum)
{
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+ /* Even if printf() is available, it's large. Punt it for SPL builds */
+#if !defined(CONFIG_SPL_BUILD)
printf("raise: Signal # %d caught\n", signum);
#endif
return 0;