diff options
| author | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2015-02-27 02:26:52 +0900 |
|---|---|---|
| committer | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2015-03-01 00:02:40 +0900 |
| commit | d3384bf77eb9a202d8218e1fe1da2f21af034aa7 (patch) | |
| tree | 9cad48dc39695069846b887d77a86dc12486866f /arch | |
| parent | 198a97a6abe7090109002baea0d2cb46070955aa (diff) | |
| download | u-boot-imx-d3384bf77eb9a202d8218e1fe1da2f21af034aa7.zip u-boot-imx-d3384bf77eb9a202d8218e1fe1da2f21af034aa7.tar.gz u-boot-imx-d3384bf77eb9a202d8218e1fe1da2f21af034aa7.tar.bz2 | |
ARM: UniPhier: reset NAND core in SPL for non-NAND boot mode
For all the UniPhier SoCs so far, the reset signal of the NAND core
is automatically deasserted after the PLL gets stabled.
(The bit 2 of SC_RSTCTRL is default to one.)
This causes a fatal problem on the NAND controller of PH1-LD4.
For that SoC, the NAND I/O pins are not set up yet at the power-on
reset except the NAND boot mode. As a result, the NAND controller
begins automatic device scanning with wrong I/O pins and finally
hangs up.
Actually, U-Boot dies after printing "NAND:" on the console unless
the boot mode latch detected the NAND boot mode.
To work around this problem, reset the NAND core in SPL for non-NAND
boot modes. If CONFIG_NAND_DENALI is enabled, the reset signal is
deasserted again in U-Boot proper. At this time, I/O pins have been
correctly set up, the device scanning should succeed.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c index ae4185f..37bb79e 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c +++ b/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c @@ -5,6 +5,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include <common.h> +#include <spl.h> #include <asm/io.h> #include <mach/sc-regs.h> @@ -14,7 +16,10 @@ void early_clkrst_init(void) /* deassert reset */ tmp = readl(SC_RSTCTRL); + tmp |= SC_RSTCTRL_NRST_UMC1 | SC_RSTCTRL_NRST_UMC0; + if (spl_boot_device() != BOOT_DEVICE_NAND) + tmp &= ~SC_RSTCTRL_NRST_NAND; writel(tmp, SC_RSTCTRL); readl(SC_RSTCTRL); /* dummy read */ |