Merge branch 'master' of git://git.denx.de/u-boot-arm

65 files changed, 1690 insertions, 661 deletions

diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/cpu/arm720t/tegra-common/spl.c
index 3479541..e0f9d5b 100644
--- a/arch/arm/cpu/arm720t/tegra-common/spl.c
+++ b/arch/arm/cpu/arm720t/tegra-common/spl.c
@@ -15,7 +15,7 @@
 #include <asm/arch/tegra.h>
 #include <asm/arch-tegra/apb_misc.h>
 #include <asm/arch-tegra/board.h>
-#include <asm/arch/spl.h>
+#include <asm/spl.h>
 #include "cpu.h"
 
 void spl_board_init(void)
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
index b91e948..19730ce 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
@@ -14,7 +14,7 @@
 #include <asm/arch/hardware.h>
 #include <asm/arch/davinci_misc.h>
 #include <asm/arch/ddr2_defs.h>
-#include <asm/arch/emif_defs.h>
+#include <asm/ti-common/davinci_nand.h>
 #include <asm/arch/pll_defs.h>
 
 void davinci_enable_uart0(void)
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
index ee096fe..c8b4498 100644
--- a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
@@ -11,6 +11,7 @@
 #include <nand.h>
 #include <ns16550.h>
 #include <post.h>
+#include <asm/ti-common/davinci_nand.h>
 #include <asm/arch/dm365_lowlevel.h>
 #include <asm/arch/hardware.h>
 
diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index 9a625c4..bbe9d1a 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -95,6 +95,7 @@ void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
 	       &emif_reg[nr]->emif_rd_wr_exec_thresh);
 
 	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
+	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
 	writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
 	writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
 
diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c
index 2fbf60d..8d86f97 100644
--- a/arch/arm/cpu/armv7/at91/cpu.c
+++ b/arch/arm/cpu/armv7/at91/cpu.c
@@ -61,6 +61,8 @@ int print_cpuinfo(void)
 
 void enable_caches(void)
 {
+	icache_enable();
+	dcache_enable();
 }
 
 unsigned int get_chip_id(void)
diff --git a/arch/arm/cpu/armv7/exynos/dmc_common.c b/arch/arm/cpu/armv7/exynos/dmc_common.c
index cca925e..9b6ee69 100644
--- a/arch/arm/cpu/armv7/exynos/dmc_common.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_common.c
@@ -162,7 +162,7 @@ void mem_ctrl_init(int reset)
 
 	/* If there are any other memory variant, add their init call below */
 	if (param->mem_type == DDR_MODE_DDR3) {
-		ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size, reset);
+		ret = ddr3_mem_ctrl_init(mem, reset);
 		if (ret) {
 			/* will hang if failed to init memory control */
 			while (1)
diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
index 487e6f4..b86dd2d 100644
--- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
@@ -6,6 +6,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <common.h>
 #include <config.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
@@ -16,7 +17,11 @@
 #include "exynos5_setup.h"
 #include "clock_init.h"
 
-#define TIMEOUT	10000
+#define TIMEOUT_US		10000
+#define NUM_BYTE_LANES		4
+#define DEFAULT_DQS		8
+#define DEFAULT_DQS_X4		(DEFAULT_DQS << 24) || (DEFAULT_DQS << 16) \
+				|| (DEFAULT_DQS << 8) || (DEFAULT_DQS << 0)
 
 #ifdef CONFIG_EXYNOS5250
 static void reset_phy_ctrl(void)
@@ -28,8 +33,7 @@ static void reset_phy_ctrl(void)
 	writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl);
 }
 
-int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
-		       int reset)
+int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
 {
 	unsigned int val;
 	struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
@@ -177,7 +181,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		writel(val, &phy1_ctrl->phy_con1);
 
 		writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config);
-		i = TIMEOUT;
+		i = TIMEOUT_US;
 		while ((readl(&dmc->phystatus) &
 			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) !=
 			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) {
@@ -221,8 +225,220 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 #endif
 
 #ifdef CONFIG_EXYNOS5420
-int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
-		       int reset)
+/**
+ * RAM address to use in the test.
+ *
+ * We'll use 4 words at this address and 4 at this address + 0x80 (Ares
+ * interleaves channels every 128 bytes).  This will allow us to evaluate all of
+ * the chips in a 1 chip per channel (2GB) system and half the chips in a 2
+ * chip per channel (4GB) system.  We can't test the 2nd chip since we need to
+ * do tests before the 2nd chip is enabled.  Looking at the 2nd chip isn't
+ * critical because the 1st and 2nd chip have very similar timings (they'd
+ * better have similar timings, since there's only a single adjustment that is
+ * shared by both chips).
+ */
+const unsigned int test_addr = CONFIG_SYS_SDRAM_BASE;
+
+/* Test pattern with which RAM will be tested */
+static const unsigned int test_pattern[] = {
+	0x5a5a5a5a,
+	0xa5a5a5a5,
+	0xf0f0f0f0,
+	0x0f0f0f0f,
+};
+
+/**
+ * This function is a test vector for sw read leveling,
+ * it compares the read data with the written data.
+ *
+ * @param ch			DMC channel number
+ * @param byte_lane		which DQS byte offset,
+ *				possible values are 0,1,2,3
+ * @return			TRUE if memory was good, FALSE if not.
+ */
+static bool dmc_valid_window_test_vector(int ch, int byte_lane)
+{
+	unsigned int read_data;
+	unsigned int mask;
+	int i;
+
+	mask = 0xFF << (8 * byte_lane);
+
+	for (i = 0; i < ARRAY_SIZE(test_pattern); i++) {
+		read_data = readl(test_addr + i * 4 + ch * 0x80);
+		if ((read_data & mask) != (test_pattern[i] & mask))
+			return false;
+	}
+
+	return true;
+}
+
+/**
+ * This function returns current read offset value.
+ *
+ * @param phy_ctrl	pointer to the current phy controller
+ */
+static unsigned int dmc_get_read_offset_value(struct exynos5420_phy_control
+					       *phy_ctrl)
+{
+	return readl(&phy_ctrl->phy_con4);
+}
+
+/**
+ * This function performs resync, so that slave DLL is updated.
+ *
+ * @param phy_ctrl	pointer to the current phy controller
+ */
+static void ddr_phy_set_do_resync(struct exynos5420_phy_control *phy_ctrl)
+{
+	setbits_le32(&phy_ctrl->phy_con10, PHY_CON10_CTRL_OFFSETR3);
+	clrbits_le32(&phy_ctrl->phy_con10, PHY_CON10_CTRL_OFFSETR3);
+}
+
+/**
+ * This function sets read offset value register with 'offset'.
+ *
+ * ...we also call call ddr_phy_set_do_resync().
+ *
+ * @param phy_ctrl	pointer to the current phy controller
+ * @param offset	offset to read DQS
+ */
+static void dmc_set_read_offset_value(struct exynos5420_phy_control *phy_ctrl,
+				      unsigned int offset)
+{
+	writel(offset, &phy_ctrl->phy_con4);
+	ddr_phy_set_do_resync(phy_ctrl);
+}
+
+/**
+ * Convert a 2s complement byte to a byte with a sign bit.
+ *
+ * NOTE: you shouldn't use normal math on the number returned by this function.
+ *   As an example, -10 = 0xf6.  After this function -10 = 0x8a.  If you wanted
+ *   to do math and get the average of 10 and -10 (should be 0):
+ *     0x8a + 0xa = 0x94 (-108)
+ *     0x94 / 2   = 0xca (-54)
+ *   ...and 0xca = sign bit plus 0x4a, or -74
+ *
+ * Also note that you lose the ability to represent -128 since there are two
+ * representations of 0.
+ *
+ * @param b	The byte to convert in two's complement.
+ * @return	The 7-bit value + sign bit.
+ */
+
+unsigned char make_signed_byte(signed char b)
+{
+	if (b < 0)
+		return 0x80 | -b;
+	else
+		return b;
+}
+
+/**
+ * Test various shifts starting at 'start' and going to 'end'.
+ *
+ * For each byte lane, we'll walk through shift starting at 'start' and going
+ * to 'end' (inclusive).  When we are finally able to read the test pattern
+ * we'll store the value in the results array.
+ *
+ * @param phy_ctrl		pointer to the current phy controller
+ * @param ch			channel number
+ * @param start			the start shift.  -127 to 127
+ * @param end			the end shift.  -127 to 127
+ * @param results		we'll store results for each byte lane.
+ */
+
+void test_shifts(struct exynos5420_phy_control *phy_ctrl, int ch,
+		 int start, int end, int results[NUM_BYTE_LANES])
+{
+	int incr = (start < end) ? 1 : -1;
+	int byte_lane;
+
+	for (byte_lane = 0; byte_lane < NUM_BYTE_LANES; byte_lane++) {
+		int shift;
+
+		dmc_set_read_offset_value(phy_ctrl, DEFAULT_DQS_X4);
+		results[byte_lane] = DEFAULT_DQS;
+
+		for (shift = start; shift != (end + incr); shift += incr) {
+			unsigned int byte_offsetr;
+			unsigned int offsetr;
+
+			byte_offsetr = make_signed_byte(shift);
+
+			offsetr = dmc_get_read_offset_value(phy_ctrl);
+			offsetr &= ~(0xFF << (8 * byte_lane));
+			offsetr |= (byte_offsetr << (8 * byte_lane));
+			dmc_set_read_offset_value(phy_ctrl, offsetr);
+
+			if (dmc_valid_window_test_vector(ch, byte_lane)) {
+				results[byte_lane] = shift;
+				break;
+			}
+		}
+	}
+}
+
+/**
+ * This function performs SW read leveling to compensate DQ-DQS skew at
+ * receiver it first finds the optimal read offset value on each DQS
+ * then applies the value to PHY.
+ *
+ * Read offset value has its min margin and max margin. If read offset
+ * value exceeds its min or max margin, read data will have corruption.
+ * To avoid this we are doing sw read leveling.
+ *
+ * SW read leveling is:
+ * 1> Finding offset value's left_limit and right_limit
+ * 2> and calculate its center value
+ * 3> finally programs that center value to PHY
+ * 4> then PHY gets its optimal offset value.
+ *
+ * @param phy_ctrl		pointer to the current phy controller
+ * @param ch			channel number
+ * @param coarse_lock_val	The coarse lock value read from PHY_CON13.
+ *				(0 - 0x7f)
+ */
+static void software_find_read_offset(struct exynos5420_phy_control *phy_ctrl,
+				      int ch, unsigned int coarse_lock_val)
+{
+	unsigned int offsetr_cent;
+	int byte_lane;
+	int left_limit;
+	int right_limit;
+	int left[NUM_BYTE_LANES];
+	int right[NUM_BYTE_LANES];
+	int i;
+
+	/* Fill the memory with test patterns */
+	for (i = 0; i < ARRAY_SIZE(test_pattern); i++)
+		writel(test_pattern[i], test_addr + i * 4 + ch * 0x80);
+
+	/* Figure out the limits we'll test with; keep -127 < limit < 127 */
+	left_limit = DEFAULT_DQS - coarse_lock_val;
+	right_limit = DEFAULT_DQS + coarse_lock_val;
+	if (right_limit > 127)
+		right_limit = 127;
+
+	/* Fill in the location where reads were OK from left and right */
+	test_shifts(phy_ctrl, ch, left_limit, right_limit, left);
+	test_shifts(phy_ctrl, ch, right_limit, left_limit, right);
+
+	/* Make a final value by taking the center between the left and right */
+	offsetr_cent = 0;
+	for (byte_lane = 0; byte_lane < NUM_BYTE_LANES; byte_lane++) {
+		int temp_center;
+		unsigned int vmwc;
+
+		temp_center = (left[byte_lane] + right[byte_lane]) / 2;
+		vmwc = make_signed_byte(temp_center);
+		offsetr_cent |= vmwc << (8 * byte_lane);
+	}
+	dmc_set_read_offset_value(phy_ctrl, offsetr_cent);
+}
+
+int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
 {
 	struct exynos5420_clock *clk =
 		(struct exynos5420_clock *)samsung_get_base_clock();
@@ -231,7 +447,9 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 	struct exynos5420_phy_control *phy0_ctrl, *phy1_ctrl;
 	struct exynos5420_dmc *drex0, *drex1;
 	struct exynos5420_tzasc *tzasc0, *tzasc1;
+	struct exynos5_power *pmu;
 	uint32_t val, n_lock_r, n_lock_w_phy0, n_lock_w_phy1;
+	uint32_t lock0_info, lock1_info;
 	int chip;
 	int i;
 
@@ -244,6 +462,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 	tzasc0 = (struct exynos5420_tzasc *)samsung_get_base_dmc_tzasc();
 	tzasc1 = (struct exynos5420_tzasc *)(samsung_get_base_dmc_tzasc()
 							+ DMC_OFFSET);
+	pmu = (struct exynos5_power *)EXYNOS5420_POWER_BASE;
 
 	/* Enable PAUSE for DREX */
 	setbits_le32(&clk->pause, ENABLE_BIT);
@@ -394,7 +613,41 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		 */
 		dmc_config_mrs(mem, &drex0->directcmd);
 		dmc_config_mrs(mem, &drex1->directcmd);
-	} else {
+	}
+
+	/*
+	 * Get PHY_CON13 from both phys.  Gate CLKM around reading since
+	 * PHY_CON13 is glitchy when CLKM is running.  We're paranoid and
+	 * wait until we get a "fine lock", though a coarse lock is probably
+	 * OK (we only use the coarse numbers below).  We try to gate the
+	 * clock for as short a time as possible in case SDRAM is somehow
+	 * sensitive.  sdelay(10) in the loop is arbitrary to make sure
+	 * there is some time for PHY_CON13 to get updated.  In practice
+	 * no delay appears to be needed.
+	 */
+	val = readl(&clk->gate_bus_cdrex);
+	while (true) {
+		writel(val & ~0x1, &clk->gate_bus_cdrex);
+		lock0_info = readl(&phy0_ctrl->phy_con13);
+		writel(val, &clk->gate_bus_cdrex);
+
+		if ((lock0_info & CTRL_FINE_LOCKED) == CTRL_FINE_LOCKED)
+			break;
+
+		sdelay(10);
+	}
+	while (true) {
+		writel(val & ~0x2, &clk->gate_bus_cdrex);
+		lock1_info = readl(&phy1_ctrl->phy_con13);
+		writel(val, &clk->gate_bus_cdrex);
+
+		if ((lock1_info & CTRL_FINE_LOCKED) == CTRL_FINE_LOCKED)
+			break;
+
+		sdelay(10);
+	}
+
+	if (!reset) {
 		/*
 		 * During Suspend-Resume & S/W-Reset, as soon as PMU releases
 		 * pad retention, CKE goes high. This causes memory contents
@@ -445,15 +698,13 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
 		writel(val, &phy1_ctrl->phy_con1);
 
-		n_lock_r = readl(&phy0_ctrl->phy_con13);
-		n_lock_w_phy0 = (n_lock_r & CTRL_LOCK_COARSE_MASK) >> 2;
+		n_lock_w_phy0 = (lock0_info & CTRL_LOCK_COARSE_MASK) >> 2;
 		n_lock_r = readl(&phy0_ctrl->phy_con12);
 		n_lock_r &= ~CTRL_DLL_ON;
 		n_lock_r |= n_lock_w_phy0;
 		writel(n_lock_r, &phy0_ctrl->phy_con12);
 
-		n_lock_r = readl(&phy1_ctrl->phy_con13);
-		n_lock_w_phy1 = (n_lock_r & CTRL_LOCK_COARSE_MASK) >> 2;
+		n_lock_w_phy1 = (lock1_info & CTRL_LOCK_COARSE_MASK) >> 2;
 		n_lock_r = readl(&phy1_ctrl->phy_con12);
 		n_lock_r &= ~CTRL_DLL_ON;
 		n_lock_r |= n_lock_w_phy1;
@@ -482,7 +733,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		writel(val, &phy1_ctrl->phy_con1);
 
 		writel(CTRL_RDLVL_GATE_ENABLE, &drex0->rdlvl_config);
-		i = TIMEOUT;
+		i = TIMEOUT_US;
 		while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO) !=
 			RDLVL_COMPLETE_CHO) && (i > 0)) {
 			/*
@@ -497,7 +748,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		writel(CTRL_RDLVL_GATE_DISABLE, &drex0->rdlvl_config);
 
 		writel(CTRL_RDLVL_GATE_ENABLE, &drex1->rdlvl_config);
-		i = TIMEOUT;
+		i = TIMEOUT_US;
 		while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO) !=
 			RDLVL_COMPLETE_CHO) && (i > 0)) {
 			/*
@@ -522,77 +773,6 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 			       &drex1->directcmd);
 		}
 
-		if (mem->read_leveling_enable) {
-			/* Set Read DQ Calibration */
-			val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4;
-			for (chip = 0; chip < mem->chips_to_configure; chip++) {
-				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
-				       &drex0->directcmd);
-				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
-				       &drex1->directcmd);
-			}
-
-			val = readl(&phy0_ctrl->phy_con1);
-			val |= READ_LEVELLING_DDR3;
-			writel(val, &phy0_ctrl->phy_con1);
-			val = readl(&phy1_ctrl->phy_con1);
-			val |= READ_LEVELLING_DDR3;
-			writel(val, &phy1_ctrl->phy_con1);
-
-			val = readl(&phy0_ctrl->phy_con2);
-			val |= (RDLVL_EN | RDLVL_INCR_ADJ);
-			writel(val, &phy0_ctrl->phy_con2);
-			val = readl(&phy1_ctrl->phy_con2);
-			val |= (RDLVL_EN | RDLVL_INCR_ADJ);
-			writel(val, &phy1_ctrl->phy_con2);
-
-			setbits_le32(&drex0->rdlvl_config,
-				     CTRL_RDLVL_DATA_ENABLE);
-			i = TIMEOUT;
-			while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO)
-				 != RDLVL_COMPLETE_CHO) && (i > 0)) {
-				/*
-				 * TODO(waihong): Comment on how long this take
-				 * to timeout
-				 */
-				sdelay(100);
-				i--;
-			}
-			if (!i)
-				return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
-
-			clrbits_le32(&drex0->rdlvl_config,
-				     CTRL_RDLVL_DATA_ENABLE);
-			setbits_le32(&drex1->rdlvl_config,
-				     CTRL_RDLVL_DATA_ENABLE);
-			i = TIMEOUT;
-			while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO)
-				 != RDLVL_COMPLETE_CHO) && (i > 0)) {
-				/*
-				 * TODO(waihong): Comment on how long this take
-				 * to timeout
-				 */
-				sdelay(100);
-				i--;
-			}
-			if (!i)
-				return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
-
-			clrbits_le32(&drex1->rdlvl_config,
-				     CTRL_RDLVL_DATA_ENABLE);
-
-			val = (0x3 << DIRECT_CMD_BANK_SHIFT);
-			for (chip = 0; chip < mem->chips_to_configure; chip++) {
-				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
-				       &drex0->directcmd);
-				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
-				       &drex1->directcmd);
-			}
-
-			update_reset_dll(&drex0->phycontrol0, DDR_MODE_DDR3);
-			update_reset_dll(&drex1->phycontrol0, DDR_MODE_DDR3);
-		}
-
 		/* Common Settings for Leveling */
 		val = PHY_CON12_RESET_VAL;
 		writel((val + n_lock_w_phy0), &phy0_ctrl->phy_con12);
@@ -602,6 +782,27 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		setbits_le32(&phy1_ctrl->phy_con2, DLL_DESKEW_EN);
 	}
 
+	/*
+	 * Do software read leveling
+	 *
+	 * Do this before we turn on auto refresh since the auto refresh can
+	 * be in conflict with the resync operation that's part of setting
+	 * read leveling.
+	 */
+	if (!reset) {
+		/* restore calibrated value after resume */
+		dmc_set_read_offset_value(phy0_ctrl, readl(&pmu->pmu_spare1));
+		dmc_set_read_offset_value(phy1_ctrl, readl(&pmu->pmu_spare2));
+	} else {
+		software_find_read_offset(phy0_ctrl, 0,
+					  CTRL_LOCK_COARSE(lock0_info));
+		software_find_read_offset(phy1_ctrl, 1,
+					  CTRL_LOCK_COARSE(lock1_info));
+		/* save calibrated value to restore after resume */
+		writel(dmc_get_read_offset_value(phy0_ctrl), &pmu->pmu_spare1);
+		writel(dmc_get_read_offset_value(phy1_ctrl), &pmu->pmu_spare2);
+	}
+
 	/* Send PALL command */
 	dmc_config_prech(mem, &drex0->directcmd);
 	dmc_config_prech(mem, &drex1->directcmd);
diff --git a/arch/arm/cpu/armv7/exynos/exynos5_setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
index 53b0ace..3242093 100644
--- a/arch/arm/cpu/armv7/exynos/exynos5_setup.h
+++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
@@ -282,8 +282,12 @@
 #define PHY_CON12_VAL		0x10107F50
 #define CTRL_START		(1 << 6)
 #define CTRL_DLL_ON		(1 << 5)
+#define CTRL_LOCK_COARSE_OFFSET	10
+#define CTRL_LOCK_COARSE_MASK	(0x7F << CTRL_LOCK_COARSE_OFFSET)
+#define CTRL_LOCK_COARSE(x)	(((x) & CTRL_LOCK_COARSE_MASK) >> \
+				 CTRL_LOCK_COARSE_OFFSET)
 #define CTRL_FORCE_MASK		(0x7F << 8)
-#define CTRL_LOCK_COARSE_MASK	(0x7F << 10)
+#define CTRL_FINE_LOCKED	0x7
 
 #define CTRL_OFFSETD_RESET_VAL	0x8
 #define CTRL_OFFSETD_VAL	0x7F
@@ -431,10 +435,10 @@
 
 /*
  * Definitions that differ with SoC's.
- * Below is the part defining macros for smdk5250.
- * Else part introduces macros for smdk5420.
+ * Below is the part defining macros for Exynos5250.
+ * Else part introduces macros for Exynos5420.
  */
-#ifndef CONFIG_SMDK5420
+#ifndef CONFIG_EXYNOS5420
 
 /* APLL_CON1 */
 #define APLL_CON1_VAL	(0x00203800)
@@ -890,16 +894,11 @@ enum {
 /*
  * Memory variant specific initialization code for DDR3
  *
- * @param mem		Memory timings for this memory type.
- * @param mem_iv_size	Memory interleaving size is a configurable parameter
- *			which the DMC uses to decide how to split a memory
- *			chunk into smaller chunks to support concurrent
- *			accesses; may vary across boards.
+ * @param mem          Memory timings for this memory type.
  * @param reset         Reset DDR PHY during initialization.
  * @return 0 if ok, SETUP_ERR_... if there is a problem
  */
-int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
-			int reset);
+int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset);
 
 /* Memory variant specific initialization code for LPDDR3 */
 void lpddr3_mem_ctrl_init(void);
diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
index dcc270f..83e1dcf 100644
--- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c
+++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
@@ -49,8 +49,6 @@ int do_lowlevel_init(void)
 
 	arch_cpu_init();
 
-	set_ps_hold_ctrl();
-
 	reset_status = get_reset_status();
 
 	switch (reset_status) {
diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile
index b1bd022..c4af252 100644
--- a/arch/arm/cpu/armv7/keystone/Makefile
+++ b/arch/arm/cpu/armv7/keystone/Makefile
@@ -5,7 +5,6 @@
 # SPDX-License-Identifier:     GPL-2.0+
 #
 
-obj-y	+= aemif.o
 obj-y	+= init.o
 obj-y	+= psc.o
 obj-y	+= clock.o
diff --git a/arch/arm/cpu/armv7/keystone/aemif.c b/arch/arm/cpu/armv7/keystone/aemif.c
deleted file mode 100644
index 9b26886..0000000
--- a/arch/arm/cpu/armv7/keystone/aemif.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Keystone2: Asynchronous EMIF Configuration
- *
- * (C) Copyright 2012-2014
- *     Texas Instruments Incorporated, <www.ti.com>
- *
- * SPDX-License-Identifier:     GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/emif_defs.h>
-
-#define AEMIF_CFG_SELECT_STROBE(v)	((v) ? 1 << 31 : 0)
-#define AEMIF_CFG_EXTEND_WAIT(v)	((v) ? 1 << 30 : 0)
-#define AEMIF_CFG_WR_SETUP(v)		(((v) & 0x0f) << 26)
-#define AEMIF_CFG_WR_STROBE(v)		(((v) & 0x3f) << 20)
-#define AEMIF_CFG_WR_HOLD(v)		(((v) & 0x07) << 17)
-#define AEMIF_CFG_RD_SETUP(v)		(((v) & 0x0f) << 13)
-#define AEMIF_CFG_RD_STROBE(v)		(((v) & 0x3f) << 7)
-#define AEMIF_CFG_RD_HOLD(v)		(((v) & 0x07) << 4)
-#define AEMIF_CFG_TURN_AROUND(v)	(((v) & 0x03) << 2)
-#define AEMIF_CFG_WIDTH(v)		(((v) & 0x03) << 0)
-
-#define set_config_field(reg, field, val)			\
-	do {							\
-		if (val != -1) {				\
-			reg &= ~AEMIF_CFG_##field(0xffffffff);	\
-			reg |=	AEMIF_CFG_##field(val);		\
-		}						\
-	} while (0)
-
-void configure_async_emif(int cs, struct async_emif_config *cfg)
-{
-	unsigned long tmp;
-
-	if (cfg->mode == ASYNC_EMIF_MODE_NAND) {
-		tmp = __raw_readl(&davinci_emif_regs->nandfcr);
-		tmp |= (1 << cs);
-		__raw_writel(tmp, &davinci_emif_regs->nandfcr);
-
-	} else if (cfg->mode == ASYNC_EMIF_MODE_ONENAND) {
-		tmp = __raw_readl(&davinci_emif_regs->one_nand_cr);
-		tmp |= (1 << cs);
-		__raw_writel(tmp, &davinci_emif_regs->one_nand_cr);
-	}
-
-	tmp = __raw_readl(&davinci_emif_regs->abncr[cs]);
-
-	set_config_field(tmp, SELECT_STROBE,	cfg->select_strobe);
-	set_config_field(tmp, EXTEND_WAIT,	cfg->extend_wait);
-	set_config_field(tmp, WR_SETUP,		cfg->wr_setup);
-	set_config_field(tmp, WR_STROBE,	cfg->wr_strobe);
-	set_config_field(tmp, WR_HOLD,		cfg->wr_hold);
-	set_config_field(tmp, RD_SETUP,		cfg->rd_setup);
-	set_config_field(tmp, RD_STROBE,	cfg->rd_strobe);
-	set_config_field(tmp, RD_HOLD,		cfg->rd_hold);
-	set_config_field(tmp, TURN_AROUND,	cfg->turn_around);
-	set_config_field(tmp, WIDTH,		cfg->width);
-
-	__raw_writel(tmp, &davinci_emif_regs->abncr[cs]);
-}
-
-void init_async_emif(int num_cs, struct async_emif_config *config)
-{
-	int cs;
-
-	for (cs = 0; cs < num_cs; cs++)
-		configure_async_emif(cs, config + cs);
-}
diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile
index d7285fc..6dc9f8e 100644
--- a/arch/arm/cpu/armv7/mx6/Makefile
+++ b/arch/arm/cpu/armv7/mx6/Makefile
@@ -8,4 +8,5 @@
 #
 
 obj-y	:= soc.o clock.o
+obj-$(CONFIG_SPL_BUILD)	     += ddr.o
 obj-$(CONFIG_SECURE_BOOT)    += hab.o
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
new file mode 100644
index 0000000..0434211
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -0,0 +1,490 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/types.h>
+
+#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+/* Configure MX6DQ mmdc iomux */
+void mx6dq_dram_iocfg(unsigned width,
+		      const struct mx6dq_iomux_ddr_regs *ddr,
+		      const struct mx6dq_iomux_grp_regs *grp)
+{
+	volatile struct mx6dq_iomux_ddr_regs *mx6_ddr_iomux;
+	volatile struct mx6dq_iomux_grp_regs *mx6_grp_iomux;
+
+	mx6_ddr_iomux = (struct mx6dq_iomux_ddr_regs *)MX6DQ_IOM_DDR_BASE;
+	mx6_grp_iomux = (struct mx6dq_iomux_grp_regs *)MX6DQ_IOM_GRP_BASE;
+
+	/* DDR IO Type */
+	mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
+	mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
+
+	/* Clock */
+	mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
+	mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
+
+	/* Address */
+	mx6_ddr_iomux->dram_cas = ddr->dram_cas;
+	mx6_ddr_iomux->dram_ras = ddr->dram_ras;
+	mx6_grp_iomux->grp_addds = grp->grp_addds;
+
+	/* Control */
+	mx6_ddr_iomux->dram_reset = ddr->dram_reset;
+	mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
+	mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
+	mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
+	mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
+	mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
+	mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
+
+	/* Data Strobes */
+	mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
+	mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
+	mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
+		mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
+		mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
+		mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
+		mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
+	}
+
+	/* Data */
+	mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
+	mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
+	mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
+	if (width >= 32) {
+		mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
+		mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
+	}
+	if (width >= 64) {
+		mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
+		mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
+		mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
+		mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
+	}
+	mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
+	mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
+		mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
+		mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
+		mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
+		mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
+	}
+}
+#endif
+
+#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+/* Configure MX6SDL mmdc iomux */
+void mx6sdl_dram_iocfg(unsigned width,
+		       const struct mx6sdl_iomux_ddr_regs *ddr,
+		       const struct mx6sdl_iomux_grp_regs *grp)
+{
+	volatile struct mx6sdl_iomux_ddr_regs *mx6_ddr_iomux;
+	volatile struct mx6sdl_iomux_grp_regs *mx6_grp_iomux;
+
+	mx6_ddr_iomux = (struct mx6sdl_iomux_ddr_regs *)MX6SDL_IOM_DDR_BASE;
+	mx6_grp_iomux = (struct mx6sdl_iomux_grp_regs *)MX6SDL_IOM_GRP_BASE;
+
+	/* DDR IO Type */
+	mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
+	mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
+
+	/* Clock */
+	mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
+	mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
+
+	/* Address */
+	mx6_ddr_iomux->dram_cas = ddr->dram_cas;
+	mx6_ddr_iomux->dram_ras = ddr->dram_ras;
+	mx6_grp_iomux->grp_addds = grp->grp_addds;
+
+	/* Control */
+	mx6_ddr_iomux->dram_reset = ddr->dram_reset;
+	mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
+	mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
+	mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
+	mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
+	mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
+	mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
+
+	/* Data Strobes */
+	mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
+	mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
+	mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
+		mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
+		mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
+		mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
+		mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
+	}
+
+	/* Data */
+	mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
+	mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
+	mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
+	if (width >= 32) {
+		mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
+		mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
+	}
+	if (width >= 64) {
+		mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
+		mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
+		mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
+		mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
+	}
+	mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
+	mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
+		mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
+		mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
+		mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
+		mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
+	}
+}
+#endif
+
+/*
+ * Configure mx6 mmdc registers based on:
+ *  - board-specific memory configuration
+ *  - board-specific calibration data
+ *  - ddr3 chip details
+ *
+ * The various calculations here are derived from the Freescale
+ * i.Mx6DQSDL DDR3 Script Aid spreadsheet (DOC-94917) designed to generate MMDC
+ * configuration registers based on memory system and memory chip parameters.
+ *
+ * The defaults here are those which were specified in the spreadsheet.
+ * For details on each register, refer to the IMX6DQRM and/or IMX6SDLRM
+ * section titled MMDC initialization
+ */
+#define MR(val, ba, cmd, cs1) \
+	((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
+void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
+		  const struct mx6_mmdc_calibration *c,
+		  const struct mx6_ddr3_cfg *m)
+{
+	volatile struct mmdc_p_regs *mmdc0;
+	volatile struct mmdc_p_regs *mmdc1;
+	u32 reg;
+	u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd;
+	u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl;
+	u8 todt_idle_off = 0x4; /* from DDR3 Script Aid spreadsheet */
+	u16 trcd, trc, tras, twr, tmrd, trtp, trp, twtr, trfc, txs, txpr;
+	u16 CS0_END;
+	u16 tdllk = 0x1ff; /* DLL locking time: 512 cycles (JEDEC DDR3) */
+	int clkper; /* clock period in picoseconds */
+	int clock; /* clock freq in mHz */
+	int cs;
+
+	mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+	mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
+
+	/* MX6D/MX6Q: 1066 MHz memory clock, clkper = 1.894ns = 1894ps */
+	if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
+		clock = 528;
+		tcwl = 4;
+	}
+	/* MX6S/MX6DL: 800 MHz memory clock, clkper = 2.5ns = 2500ps */
+	else {
+		clock = 400;
+		tcwl = 3;
+	}
+	clkper = (1000*1000)/clock; /* ps */
+	todtlon = tcwl;
+	taxpd = tcwl;
+	tanpd = tcwl;
+	tcwl = tcwl;
+
+	switch (m->density) {
+	case 1: /* 1Gb per chip */
+		trfc = DIV_ROUND_UP(110000, clkper) - 1;
+		txs = DIV_ROUND_UP(120000, clkper) - 1;
+		break;
+	case 2: /* 2Gb per chip */
+		trfc = DIV_ROUND_UP(160000, clkper) - 1;
+		txs = DIV_ROUND_UP(170000, clkper) - 1;
+		break;
+	case 4: /* 4Gb per chip */
+		trfc = DIV_ROUND_UP(260000, clkper) - 1;
+		txs = DIV_ROUND_UP(270000, clkper) - 1;
+		break;
+	case 8: /* 8Gb per chip */
+		trfc = DIV_ROUND_UP(350000, clkper) - 1;
+		txs = DIV_ROUND_UP(360000, clkper) - 1;
+		break;
+	default:
+		/* invalid density */
+		printf("invalid chip density\n");
+		hang();
+		break;
+	}
+	txpr = txs;
+
+	switch (m->mem_speed) {
+	case 800:
+		txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
+		tcke = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
+		if (m->pagesz == 1) {
+			tfaw = DIV_ROUND_UP(40000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+		} else {
+			tfaw = DIV_ROUND_UP(50000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+		}
+		break;
+	case 1066:
+		txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
+		tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
+		if (m->pagesz == 1) {
+			tfaw = DIV_ROUND_UP(37500, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+		} else {
+			tfaw = DIV_ROUND_UP(50000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+		}
+		break;
+	case 1333:
+		txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
+		tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
+		if (m->pagesz == 1) {
+			tfaw = DIV_ROUND_UP(30000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
+		} else {
+			tfaw = DIV_ROUND_UP(45000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+		}
+		break;
+	case 1600:
+		txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
+		tcke = DIV_ROUND_UP(MAX(3*clkper, 5000), clkper) - 1;
+		if (m->pagesz == 1) {
+			tfaw = DIV_ROUND_UP(30000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
+		} else {
+			tfaw = DIV_ROUND_UP(40000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+		}
+		break;
+	default:
+		printf("invalid memory speed\n");
+		hang();
+		break;
+	}
+	txpdll = DIV_ROUND_UP(MAX(10*clkper, 24000), clkper) - 1;
+	tcl = DIV_ROUND_UP(m->trcd, clkper/10) - 3;
+	tcksre = DIV_ROUND_UP(MAX(5*clkper, 10000), clkper);
+	tcksrx = tcksre;
+	taonpd = DIV_ROUND_UP(2000, clkper) - 1;
+	taofpd = taonpd;
+	trp = DIV_ROUND_UP(m->trcd, clkper/10) - 1;
+	trcd = trp;
+	trc = DIV_ROUND_UP(m->trcmin, clkper/10) - 1;
+	tras = DIV_ROUND_UP(m->trasmin, clkper/10) - 1;
+	twr = DIV_ROUND_UP(15000, clkper) - 1;
+	tmrd = DIV_ROUND_UP(MAX(12*clkper, 15000), clkper) - 1;
+	twtr = ROUND(MAX(4*clkper, 7500)/clkper, 1) - 1;
+	trtp = twtr;
+	CS0_END = ((4*i->cs_density) <= 120) ? (4*i->cs_density)+7 : 127;
+	debug("density:%d Gb (%d Gb per chip)\n", i->cs_density, m->density);
+	debug("clock: %dMHz (%d ps)\n", clock, clkper);
+	debug("memspd:%d\n", m->mem_speed);
+	debug("tcke=%d\n", tcke);
+	debug("tcksrx=%d\n", tcksrx);
+	debug("tcksre=%d\n", tcksre);
+	debug("taofpd=%d\n", taofpd);
+	debug("taonpd=%d\n", taonpd);
+	debug("todtlon=%d\n", todtlon);
+	debug("tanpd=%d\n", tanpd);
+	debug("taxpd=%d\n", taxpd);
+	debug("trfc=%d\n", trfc);
+	debug("txs=%d\n", txs);
+	debug("txp=%d\n", txp);
+	debug("txpdll=%d\n", txpdll);
+	debug("tfaw=%d\n", tfaw);
+	debug("tcl=%d\n", tcl);
+	debug("trcd=%d\n", trcd);
+	debug("trp=%d\n", trp);
+	debug("trc=%d\n", trc);
+	debug("tras=%d\n", tras);
+	debug("twr=%d\n", twr);
+	debug("tmrd=%d\n", tmrd);
+	debug("tcwl=%d\n", tcwl);
+	debug("tdllk=%d\n", tdllk);
+	debug("trtp=%d\n", trtp);
+	debug("twtr=%d\n", twtr);
+	debug("trrd=%d\n", trrd);
+	debug("txpr=%d\n", txpr);
+	debug("CS0_END=%d\n", CS0_END);
+	debug("ncs=%d\n", i->ncs);
+	debug("Rtt_wr=%d\n", i->rtt_wr);
+	debug("Rtt_nom=%d\n", i->rtt_nom);
+	debug("SRT=%d\n", m->SRT);
+	debug("tcl=%d\n", tcl);
+	debug("twr=%d\n", twr);
+
+	/*
+	 * board-specific configuration:
+	 *  These values are determined empirically and vary per board layout
+	 *  see:
+	 *   appnote, ddr3 spreadsheet
+	 */
+	mmdc0->mpwldectrl0 = c->p0_mpwldectrl0;
+	mmdc0->mpwldectrl1 = c->p0_mpwldectrl1;
+	mmdc0->mpdgctrl0 = c->p0_mpdgctrl0;
+	mmdc0->mpdgctrl1 = c->p0_mpdgctrl1;
+	mmdc0->mprddlctl = c->p0_mprddlctl;
+	mmdc0->mpwrdlctl = c->p0_mpwrdlctl;
+	if (i->dsize > 1) {
+		mmdc1->mpwldectrl0 = c->p1_mpwldectrl0;
+		mmdc1->mpwldectrl1 = c->p1_mpwldectrl1;
+		mmdc1->mpdgctrl0 = c->p1_mpdgctrl0;
+		mmdc1->mpdgctrl1 = c->p1_mpdgctrl1;
+		mmdc1->mprddlctl = c->p1_mprddlctl;
+		mmdc1->mpwrdlctl = c->p1_mpwrdlctl;
+	}
+
+	/* Read data DQ Byte0-3 delay */
+	mmdc0->mprddqby0dl = (u32)0x33333333;
+	mmdc0->mprddqby1dl = (u32)0x33333333;
+	if (i->dsize > 0) {
+		mmdc0->mprddqby2dl = (u32)0x33333333;
+		mmdc0->mprddqby3dl = (u32)0x33333333;
+	}
+	if (i->dsize > 1) {
+		mmdc1->mprddqby0dl = (u32)0x33333333;
+		mmdc1->mprddqby1dl = (u32)0x33333333;
+		mmdc1->mprddqby2dl = (u32)0x33333333;
+		mmdc1->mprddqby3dl = (u32)0x33333333;
+	}
+
+	/* MMDC Termination: rtt_nom:2 RZQ/2(120ohm), rtt_nom:1 RZQ/4(60ohm) */
+	reg = (i->rtt_nom == 2) ? 0x00011117 : 0x00022227;
+	mmdc0->mpodtctrl = reg;
+	if (i->dsize > 1)
+		mmdc1->mpodtctrl = reg;
+
+	/* complete calibration */
+	reg = (1 << 11); /* Force measurement on delay-lines */
+	mmdc0->mpmur0 = reg;
+	if (i->dsize > 1)
+		mmdc1->mpmur0 = reg;
+
+	/* Step 1: configuration request */
+	mmdc0->mdscr = (u32)(1 << 15); /* config request */
+
+	/* Step 2: Timing configuration */
+	reg = (trfc << 24) | (txs << 16) | (txp << 13) | (txpdll << 9) |
+	      (tfaw << 4) | tcl;
+	mmdc0->mdcfg0 = reg;
+	reg = (trcd << 29) | (trp << 26) | (trc << 21) | (tras << 16) |
+	      (1 << 15) |		/* trpa */
+	      (twr << 9) | (tmrd << 5) | tcwl;
+	mmdc0->mdcfg1 = reg;
+	reg = (tdllk << 16) | (trtp << 6) | (twtr << 3) | trrd;
+	mmdc0->mdcfg2 = reg;
+	reg = (taofpd << 27) | (taonpd << 24) | (tanpd << 20) | (taxpd << 16) |
+	      (todtlon << 12) | (todt_idle_off << 4);
+	mmdc0->mdotc = reg;
+	mmdc0->mdasp = CS0_END; /* CS addressing */
+
+	/* Step 3: Configure DDR type */
+	reg = (i->cs1_mirror << 19) | (i->walat << 16) | (i->bi_on << 12) |
+	      (i->mif3_mode << 9) | (i->ralat << 6);
+	mmdc0->mdmisc = reg;
+
+	/* Step 4: Configure delay while leaving reset */
+	reg = (txpr << 16) | (i->sde_to_rst << 8) | (i->rst_to_cke << 0);
+	mmdc0->mdor = reg;
+
+	/* Step 5: Configure DDR physical parameters (density and burst len) */
+	reg = (m->rowaddr - 11) << 24 |		/* ROW */
+	      (m->coladdr - 9) << 20 |		/* COL */
+	      (1 << 19) |			/* Burst Length = 8 for DDR3 */
+	      (i->dsize << 16);			/* DDR data bus size */
+	mmdc0->mdctl = reg;
+
+	/* Step 6: Perform ZQ calibration */
+	reg = (u32)0xa1390001; /* one-time HW ZQ calib */
+	mmdc0->mpzqhwctrl = reg;
+	if (i->dsize > 1)
+		mmdc1->mpzqhwctrl = reg;
+
+	/* Step 7: Enable MMDC with desired chip select */
+	reg = mmdc0->mdctl |
+	      (1 << 31) |			/* SDE_0 for CS0 */
+	      ((i->ncs == 2) ? 1 : 0) << 30;	/* SDE_1 for CS1 */
+	mmdc0->mdctl = reg;
+
+	/* Step 8: Write Mode Registers to Init DDR3 devices */
+	for (cs = 0; cs < i->ncs; cs++) {
+		/* MR2 */
+		reg = (i->rtt_wr & 3) << 9 | (m->SRT & 1) << 7 |
+		      ((tcwl - 3) & 3) << 3;
+		mmdc0->mdscr = (u32)MR(reg, 2, 3, cs);
+		/* MR3 */
+		mmdc0->mdscr = (u32)MR(0, 3, 3, cs);
+		/* MR1 */
+		reg = ((i->rtt_nom & 1) ? 1 : 0) << 2 |
+		      ((i->rtt_nom & 2) ? 1 : 0) << 6;
+		mmdc0->mdscr = (u32)MR(reg, 1, 3, cs);
+		reg = ((tcl - 1) << 4) |	/* CAS */
+		      (1 << 8)   |		/* DLL Reset */
+		      ((twr - 3) << 9);		/* Write Recovery */
+		/* MR0 */
+		mmdc0->mdscr = (u32)MR(reg, 0, 3, cs);
+		/* ZQ calibration */
+		reg = (1 << 10);
+		mmdc0->mdscr = (u32)MR(reg, 0, 4, cs);
+	}
+
+	/* Step 10: Power down control and self-refresh */
+	reg = (tcke & 0x7) << 16 |
+	      5            << 12 |  /* PWDT_1: 256 cycles */
+	      5            <<  8 |  /* PWDT_0: 256 cycles */
+	      1            <<  6 |  /* BOTH_CS_PD */
+	      (tcksrx & 0x7) << 3 |
+	      (tcksre & 0x7);
+	mmdc0->mdpdc = reg;
+	mmdc0->mapsr = (u32)0x00011006; /* ADOPT power down enabled */
+
+	/* Step 11: Configure ZQ calibration: one-time and periodic 1ms */
+	mmdc0->mpzqhwctrl = (u32)0xa1390003;
+	if (i->dsize > 1)
+		mmdc1->mpzqhwctrl = (u32)0xa1390003;
+
+	/* Step 12: Configure and activate periodic refresh */
+	reg = (1 << 14) |	/* REF_SEL: Periodic refresh cycles of 32kHz */
+	      (7 << 11);	/* REFR: Refresh Rate - 8 refreshes */
+	mmdc0->mdref = reg;
+
+	/* Step 13: Deassert config request - init complete */
+	mmdc0->mdscr = (u32)0x00000000;
+
+	/* wait for auto-ZQ calibration to complete */
+	mdelay(1);
+}
diff --git a/arch/arm/cpu/armv7/mx6/hab.c b/arch/arm/cpu/armv7/mx6/hab.c
index 5187775..f6810a6 100644
--- a/arch/arm/cpu/armv7/mx6/hab.c
+++ b/arch/arm/cpu/armv7/mx6/hab.c
@@ -7,15 +7,69 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/hab.h>
+#include <asm/arch/sys_proto.h>
 
 /* -------- start of HAB API updates ------------*/
-#define hab_rvt_report_event ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT)
-#define hab_rvt_report_status ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS)
-#define hab_rvt_authenticate_image \
-	((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE)
-#define hab_rvt_entry ((hab_rvt_entry_t *)HAB_RVT_ENTRY)
-#define hab_rvt_exit ((hab_rvt_exit_t *)HAB_RVT_EXIT)
-#define hab_rvt_clock_init HAB_RVT_CLOCK_INIT
+
+#define hab_rvt_report_event_p					\
+(								\
+	((is_cpu_type(MXC_CPU_MX6Q) ||				\
+	  is_cpu_type(MXC_CPU_MX6D)) &&				\
+	  (soc_rev() >= CHIP_REV_1_5)) ?			\
+	((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) :	\
+	(is_cpu_type(MXC_CPU_MX6DL) &&				\
+	 (soc_rev() >= CHIP_REV_1_2)) ?				\
+	((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) :	\
+	((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT)	\
+)
+
+#define hab_rvt_report_status_p					\
+(								\
+	((is_cpu_type(MXC_CPU_MX6Q) ||				\
+	  is_cpu_type(MXC_CPU_MX6D)) &&				\
+	  (soc_rev() >= CHIP_REV_1_5)) ?			\
+	((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
+	(is_cpu_type(MXC_CPU_MX6DL) &&				\
+	 (soc_rev() >= CHIP_REV_1_2)) ?				\
+	((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
+	((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS)	\
+)
+
+#define hab_rvt_authenticate_image_p				\
+(								\
+	((is_cpu_type(MXC_CPU_MX6Q) ||				\
+	  is_cpu_type(MXC_CPU_MX6D)) &&				\
+	  (soc_rev() >= CHIP_REV_1_5)) ?			\
+	((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
+	(is_cpu_type(MXC_CPU_MX6DL) &&				\
+	 (soc_rev() >= CHIP_REV_1_2)) ?				\
+	((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
+	((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE)	\
+)
+
+#define hab_rvt_entry_p						\
+(								\
+	((is_cpu_type(MXC_CPU_MX6Q) ||				\
+	  is_cpu_type(MXC_CPU_MX6D)) &&				\
+	  (soc_rev() >= CHIP_REV_1_5)) ?			\
+	((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) :		\
+	(is_cpu_type(MXC_CPU_MX6DL) &&				\
+	 (soc_rev() >= CHIP_REV_1_2)) ?				\
+	((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) :		\
+	((hab_rvt_entry_t *)HAB_RVT_ENTRY)			\
+)
+
+#define hab_rvt_exit_p						\
+(								\
+	((is_cpu_type(MXC_CPU_MX6Q) ||				\
+	  is_cpu_type(MXC_CPU_MX6D)) &&				\
+	  (soc_rev() >= CHIP_REV_1_5)) ?			\
+	((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) :			\
+	(is_cpu_type(MXC_CPU_MX6DL) &&				\
+	 (soc_rev() >= CHIP_REV_1_2)) ?				\
+	((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) :			\
+	((hab_rvt_exit_t *)HAB_RVT_EXIT)			\
+)
 
 bool is_hab_enabled(void)
 {
@@ -52,6 +106,11 @@ int get_hab_status(void)
 	size_t bytes = sizeof(event_data); /* Event size in bytes */
 	enum hab_config config = 0;
 	enum hab_state state = 0;
+	hab_rvt_report_event_t *hab_rvt_report_event;
+	hab_rvt_report_status_t *hab_rvt_report_status;
+
+	hab_rvt_report_event = hab_rvt_report_event_p;
+	hab_rvt_report_status = hab_rvt_report_status_p;
 
 	if (is_hab_enabled())
 		puts("\nSecure boot enabled\n");
diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/cpu/armv7/omap-common/mem-common.c
index 944ef84..5bc7e1f 100644
--- a/arch/arm/cpu/armv7/omap-common/mem-common.c
+++ b/arch/arm/cpu/armv7/omap-common/mem-common.c
@@ -121,7 +121,8 @@ void gpmc_init(void)
 	writel(0x00000008, &gpmc_cfg->sysconfig);
 	writel(0x00000000, &gpmc_cfg->irqstatus);
 	writel(0x00000000, &gpmc_cfg->irqenable);
-	writel(0x00000000, &gpmc_cfg->timeout_control);
+	/* disable timeout, set a safe reset value */
+	writel(0x00001ff0, &gpmc_cfg->timeout_control);
 #ifdef CONFIG_NOR
 	writel(0x00000200, &gpmc_cfg->config);
 #else
@@ -133,5 +134,6 @@ void gpmc_init(void)
 	writel(0, &gpmc_cfg->cs[0].config7);
 	sdelay(1000);
 	/* enable chip-select specific configurations */
-	enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size);
+	if (base != 0)
+		enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size);
 }
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index e252e7f..667e77f 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -147,7 +147,7 @@ void secure_unlock_mem(void)
  *		configure secure registers and exit secure world
  *              general use.
  *****************************************************************************/
-void secureworld_exit()
+void secureworld_exit(void)
 {
 	unsigned long i;
 
@@ -178,7 +178,7 @@ void secureworld_exit()
  * Description: If chip is GP/EMU(special) type, unlock the SRAM for
  *              general use.
  *****************************************************************************/
-void try_unlock_memory()
+void try_unlock_memory(void)
 {
 	int mode;
 	int in_sdram = is_running_in_sdram();
diff --git a/arch/arm/cpu/armv7/tegra20/display.c b/arch/arm/cpu/armv7/tegra20/display.c
index 488f0c6..fd77f3f 100644
--- a/arch/arm/cpu/armv7/tegra20/display.c
+++ b/arch/arm/cpu/armv7/tegra20/display.c
@@ -328,7 +328,7 @@ static int tegra_display_decode_config(const void *blob,
 	rgb = fdt_subnode_offset(blob, node, "rgb");
 
 	config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
-	if (!config->panel_node < 0) {
+	if (config->panel_node < 0) {
 		debug("%s: Cannot find panel information\n", __func__);
 		return -1;
 	}
diff --git a/arch/arm/cpu/armv7/zynq/u-boot.lds b/arch/arm/cpu/armv7/zynq/u-boot.lds
index 69500a6..4dc9bb0 100644
--- a/arch/arm/cpu/armv7/zynq/u-boot.lds
+++ b/arch/arm/cpu/armv7/zynq/u-boot.lds
@@ -18,6 +18,7 @@ SECTIONS
 	.text :
 	{
 		*(.__image_copy_start)
+		*(.vectors)
 		CPUDIR/start.o (.text*)
 		*(.text*)
 	}
diff --git a/arch/arm/cpu/armv8/transition.S b/arch/arm/cpu/armv8/transition.S
index e0a5946..38dea5c 100644
--- a/arch/arm/cpu/armv8/transition.S
+++ b/arch/arm/cpu/armv8/transition.S
@@ -43,7 +43,7 @@ ENTRY(armv8_switch_to_el1)
 	mrs	x0, cnthctl_el2
 	orr	x0, x0, #0x3		/* Enable EL1 access to timers */
 	msr	cnthctl_el2, x0
-	msr	cntvoff_el2, x0
+	msr	cntvoff_el2, xzr
 	mrs	x0, cntkctl_el1
 	orr	x0, x0, #0x3		/* Enable EL0 access to timers */
 	msr	cntkctl_el1, x0
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 61527a2..6e2e313 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -6,7 +6,8 @@ dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
 dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 	exynos5250-snow.dtb \
 	exynos5250-smdk5250.dtb \
-	exynos5420-smdk5420.dtb
+	exynos5420-smdk5420.dtb \
+	exynos5420-peach-pit.dtb
 dtb-$(CONFIG_MX6) += imx6q-sabreauto.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts
new file mode 100644
index 0000000..8d148af
--- /dev/null
+++ b/arch/arm/dts/exynos5420-peach-pit.dts
@@ -0,0 +1,127 @@
+/*
+ * SAMSUNG/GOOGLE Peach-Pit board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos54xx.dtsi"
+
+/ {
+	model = "Samsung/Google Peach Pit board based on Exynos5420";
+
+	compatible = "google,pit-rev#", "google,pit",
+		"google,peach", "samsung,exynos5420", "samsung,exynos5";
+
+	config {
+		google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */
+		hwid = "PIT TEST A-A 7848";
+		lazy-init = <1>;
+	};
+
+	aliases {
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+		pmic = "/i2c@12ca0000";
+	};
+
+	dmc {
+		mem-manuf = "samsung";
+		mem-type = "ddr3";
+		clock-frequency = <800000000>;
+		arm-frequency = <1700000000>;
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	/* MAX77802 is on i2c bus 4 */
+	i2c@12ca0000 {
+		clock-frequency = <400000>;
+		power-regulator@9 {
+			compatible = "maxim,max77802-pmic";
+			reg = <0x9>;
+		};
+	};
+
+	i2c@12cd0000 { /* i2c7 */
+		clock-frequency = <100000>;
+	       soundcodec@20 {
+	              reg = <0x20>;
+	              compatible = "maxim,max98090-codec";
+	       };
+	};
+
+        sound@3830000 {
+                samsung,codec-type = "max98090";
+        };
+
+	i2c@12e10000 { /* i2c9 */
+		clock-frequency = <400000>;
+                tpm@20 {
+                        compatible = "infineon,slb9645-tpm";
+                        reg = <0x20>;
+		};
+	};
+
+	spi@12d30000 { /* spi1 */
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash@0 {
+			reg = <0>;
+
+			/*
+			 * A region for the kernel to store a panic event
+			 * which the firmware will add to the log.
+			*/
+			elog-panic-event-offset = <0x01e00000 0x100000>;
+
+			elog-shrink-size = <0x400>;
+			elog-full-threshold = <0xc00>;
+		};
+	};
+
+	spi@12d40000 { /* spi2 */
+		spi-max-frequency = <4000000>;
+		spi-deactivate-delay = <200>;
+		cros-ec@0 {
+			reg = <0>;
+			compatible = "google,cros-ec";
+			spi-half-duplex;
+			spi-max-timeout-ms = <1100>;
+			spi-frame-header = <0xec>;
+			ec-interrupt = <&gpio 93 1>; /* GPX1_5 */
+
+			/*
+			 * This describes the flash memory within the EC. Note
+			 * that the STM32L flash erases to 0, not 0xff.
+			 */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			flash@8000000 {
+				reg = <0x08000000 0x20000>;
+				erase-value = <0>;
+			};
+		};
+	};
+
+	xhci@12000000 {
+		samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */
+	};
+
+	xhci@12400000 {
+		samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */
+	};
+};
diff --git a/arch/arm/dts/exynos5420-smdk5420.dts b/arch/arm/dts/exynos5420-smdk5420.dts
index d739763..1bc6256 100644
--- a/arch/arm/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/dts/exynos5420-smdk5420.dts
@@ -8,7 +8,7 @@
  */
 
 /dts-v1/;
-/include/ "exynos5420.dtsi"
+/include/ "exynos54xx.dtsi"
 
 / {
 	model = "SAMSUNG SMDK5420 board based on EXYNOS5420";
@@ -19,27 +19,6 @@
 	};
 
 	aliases {
-		i2c0 = "/i2c@12c60000";
-		i2c1 = "/i2c@12c70000";
-		i2c2 = "/i2c@12c80000";
-		i2c3 = "/i2c@12c90000";
-		i2c4 = "/i2c@12ca0000";
-		i2c5 = "/i2c@12cb0000";
-		i2c6 = "/i2c@12cc0000";
-		i2c7 = "/i2c@12cd0000";
-		i2c8 = "/i2c@12e00000";
-		i2c9 = "/i2c@12e10000";
-		i2c10 = "/i2c@12e20000";
-		spi0 = "/spi@12d20000";
-		spi1 = "/spi@12d30000";
-		spi2 = "/spi@12d40000";
-		spi3 = "/spi@131a0000";
-		spi4 = "/spi@131b0000";
-		mmc0 = "/mmc@12200000";
-		mmc1 = "/mmc@12210000";
-		mmc2 = "/mmc@12220000";
-		xhci0 = "/xhci@12000000";
-		xhci1 = "/xhci@12400000";
 		serial0 = "/serial@12C30000";
 		console = "/serial@12C30000";
 	};
diff --git a/arch/arm/dts/exynos5420.dtsi b/arch/arm/dts/exynos5420.dtsi
deleted file mode 100644
index 02ead61..0000000
--- a/arch/arm/dts/exynos5420.dtsi
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2013 SAMSUNG Electronics
- * SAMSUNG EXYNOS5420 SoC device tree source
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/include/ "exynos5.dtsi"
-
-/ {
-	config {
-		machine-arch-id = <4151>;
-	};
-
-	i2c@12ca0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CA0000 0x100>;
-		interrupts = <0 60 0>;
-	};
-
-	i2c@12cb0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CB0000 0x100>;
-		interrupts = <0 61 0>;
-	};
-
-	i2c@12cc0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CC0000 0x100>;
-		interrupts = <0 62 0>;
-	};
-
-	i2c@12cd0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CD0000 0x100>;
-		interrupts = <0 63 0>;
-	};
-
-	i2c@12e00000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E00000 0x100>;
-		interrupts = <0 87 0>;
-	};
-
-	i2c@12e10000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E10000 0x100>;
-		interrupts = <0 88 0>;
-	};
-
-	i2c@12e20000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E20000 0x100>;
-		interrupts = <0 203 0>;
-	};
-};
diff --git a/arch/arm/dts/exynos54xx.dtsi b/arch/arm/dts/exynos54xx.dtsi
new file mode 100644
index 0000000..b9f8e0b
--- /dev/null
+++ b/arch/arm/dts/exynos54xx.dtsi
@@ -0,0 +1,151 @@
+/*
+ * (C) Copyright 2013 SAMSUNG Electronics
+ * SAMSUNG EXYNOS5420 SoC device tree source
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/include/ "exynos5.dtsi"
+
+/ {
+	config {
+		machine-arch-id = <4151>;
+	};
+
+	aliases {
+		i2c0 = "/i2c@12c60000";
+		i2c1 = "/i2c@12c70000";
+		i2c2 = "/i2c@12c80000";
+		i2c3 = "/i2c@12c90000";
+		i2c4 = "/i2c@12ca0000";
+		i2c5 = "/i2c@12cb0000";
+		i2c6 = "/i2c@12cc0000";
+		i2c7 = "/i2c@12cd0000";
+		i2c8 = "/i2c@12e00000";
+		i2c9 = "/i2c@12e10000";
+		i2c10 = "/i2c@12e20000";
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		xhci0 = "/xhci@12000000";
+		xhci1 = "/xhci@12400000";
+	};
+
+	i2c@12ca0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CA0000 0x100>;
+		interrupts = <0 60 0>;
+	};
+
+	i2c@12cb0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CB0000 0x100>;
+		interrupts = <0 61 0>;
+	};
+
+	i2c@12cc0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CC0000 0x100>;
+		interrupts = <0 62 0>;
+	};
+
+	i2c@12cd0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CD0000 0x100>;
+		interrupts = <0 63 0>;
+	};
+
+	i2c@12e00000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E00000 0x100>;
+		interrupts = <0 87 0>;
+	};
+
+	i2c@12e10000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E10000 0x100>;
+		interrupts = <0 88 0>;
+	};
+
+	i2c@12e20000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E20000 0x100>;
+		interrupts = <0 203 0>;
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+		samsung,pre-init;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	fimd@14400000 {
+		/* sysmmu is not used in U-Boot */
+		samsung,disable-sysmmu;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
+	dmc {
+		mem-type = "ddr3";
+	};
+
+	xhci1: xhci@12400000 {
+		compatible = "samsung,exynos5250-xhci";
+		reg = <0x12400000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		phy {
+			compatible = "samsung,exynos5250-usb3-phy";
+			reg = <0x12500000 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 6c65577..25a9d4c 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx6 mxs))
 obj-y	+= misc.o
+obj-$(CONFIG_SPL_BUILD)	+= spl.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx6))
 obj-$(CONFIG_CMD_SATA) += sata.o
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index a77c4de..5a09107 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -58,6 +58,7 @@ char *get_reset_cause(void)
 static const unsigned char col_lookup[] = {9, 10, 11, 8, 12, 9, 9, 9};
 static const unsigned char bank_lookup[] = {3, 2};
 
+/* these MMDC registers are common to the IMX53 and IMX6 */
 struct esd_mmdc_regs {
 	uint32_t	ctl;
 	uint32_t	pdc;
@@ -66,15 +67,6 @@ struct esd_mmdc_regs {
 	uint32_t	cfg1;
 	uint32_t	cfg2;
 	uint32_t	misc;
-	uint32_t	scr;
-	uint32_t	ref;
-	uint32_t	rsvd1;
-	uint32_t	rsvd2;
-	uint32_t	rwd;
-	uint32_t	or;
-	uint32_t	mrr;
-	uint32_t	cfg3lp;
-	uint32_t	mr4;
 };
 
 #define ESD_MMDC_CTL_GET_ROW(mdctl)	((ctl >> 24) & 7)
@@ -83,6 +75,12 @@ struct esd_mmdc_regs {
 #define ESD_MMDC_CTL_GET_CS1(mdctl)	((ctl >> 30) & 1)
 #define ESD_MMDC_MISC_GET_BANK(mdmisc)	((misc >> 5) & 1)
 
+/*
+ * imx_ddr_size - return size in bytes of DRAM according MMDC config
+ * The MMDC MDCTL register holds the number of bits for row, col, and data
+ * width and the MMDC MDMISC register holds the number of banks. Combine
+ * all these bits to determine the meme size the MMDC has been configured for
+ */
 unsigned imx_ddr_size(void)
 {
 	struct esd_mmdc_regs *mem = (struct esd_mmdc_regs *)MEMCTL_BASE;
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index 6e46ea8..22cd11a 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -11,6 +11,9 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
+#if !defined(CONFIG_MX25) && !defined(CONFIG_VF610)
+#include <asm/arch/sys_proto.h>
+#endif
 #include <asm/imx-common/iomux-v3.h>
 
 static void *base = (void *)IOMUXC_BASE_ADDR;
@@ -54,12 +57,23 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 #endif
 }
 
+/* configures a list of pads within declared with IOMUX_PADS macro */
 void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
 				      unsigned count)
 {
 	iomux_v3_cfg_t const *p = pad_list;
+	int stride;
 	int i;
 
-	for (i = 0; i < count; i++)
-		imx_iomux_v3_setup_pad(*p++);
+#if defined(CONFIG_MX6QDL)
+	stride = 2;
+	if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+		p += 1;
+#else
+	stride = 1;
+#endif
+	for (i = 0; i < count; i++) {
+		imx_iomux_v3_setup_pad(*p);
+		p += stride;
+	}
 }
diff --git a/arch/arm/imx-common/sata.c b/arch/arm/imx-common/sata.c
index 2e69486..c10dd28 100644
--- a/arch/arm/imx-common/sata.c
+++ b/arch/arm/imx-common/sata.c
@@ -8,13 +8,18 @@
 #include <asm/arch/iomux.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
 
 int setup_sata(void)
 {
 	struct iomuxc_base_regs *const iomuxc_regs
 		= (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
+	int ret;
 
-	int ret = enable_sata_clock();
+	if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+		return 1;
+
+	ret = enable_sata_clock();
 	if (ret)
 		return ret;
 
diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c
new file mode 100644
index 0000000..9a02a64
--- /dev/null
+++ b/arch/arm/imx-common/spl.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Copyright (C) 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/spl.h>
+#include <spl.h>
+
+#if defined(CONFIG_MX6)
+/* determine boot device from SRC_SBMR1 register (BOOT_CFG[4:1]) */
+u32 spl_boot_device(void)
+{
+	struct src *psrc = (struct src *)SRC_BASE_ADDR;
+	unsigned reg = readl(&psrc->sbmr1);
+
+	/* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
+	switch ((reg & 0x000000FF) >> 4) {
+	 /* EIM: See 8.5.1, Table 8-9 */
+	case 0x0:
+		/* BOOT_CFG1[3]: NOR/OneNAND Selection */
+		if ((reg & 0x00000008) >> 3)
+			return BOOT_DEVICE_ONENAND;
+		else
+			return BOOT_DEVICE_NOR;
+		break;
+	/* SATA: See 8.5.4, Table 8-20 */
+	case 0x2:
+		return BOOT_DEVICE_SATA;
+	/* Serial ROM: See 8.5.5.1, Table 8-22 */
+	case 0x3:
+		/* BOOT_CFG4[2:0] */
+		switch ((reg & 0x07000000) >> 24) {
+		case 0x0 ... 0x4:
+			return BOOT_DEVICE_SPI;
+		case 0x5 ... 0x7:
+			return BOOT_DEVICE_I2C;
+		}
+		break;
+	/* SD/eSD: 8.5.3, Table 8-15  */
+	case 0x4:
+	case 0x5:
+		return BOOT_DEVICE_MMC1;
+	/* MMC/eMMC: 8.5.3 */
+	case 0x6:
+	case 0x7:
+		return BOOT_DEVICE_MMC1;
+	/* NAND Flash: 8.5.2 */
+	case 0x8 ... 0xf:
+		return BOOT_DEVICE_NAND;
+	}
+	return BOOT_DEVICE_NONE;
+}
+#endif
+
+#if defined(CONFIG_SPL_MMC_SUPPORT)
+/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
+u32 spl_boot_mode(void)
+{
+	switch (spl_boot_device()) {
+	/* for MMC return either RAW or FAT mode */
+	case BOOT_DEVICE_MMC1:
+	case BOOT_DEVICE_MMC2:
+#ifdef CONFIG_SPL_FAT_SUPPORT
+		return MMCSD_MODE_FAT;
+#else
+		return MMCSD_MODE_RAW;
+#endif
+		break;
+	default:
+		puts("spl: ERROR:  unsupported device\n");
+		hang();
+	}
+}
+#endif
diff --git a/arch/arm/include/asm/arch-at91/spl.h b/arch/arm/include/asm/arch-at91/spl.h
deleted file mode 100644
index d8a87da..0000000
--- a/arch/arm/include/asm/arch-at91/spl.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2013 Atmel Corporation
- *		      Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-enum {
-	BOOT_DEVICE_NONE,
-#ifdef CONFIG_SYS_USE_MMC
-	BOOT_DEVICE_MMC1,
-	BOOT_DEVICE_MMC2,
-	BOOT_DEVICE_MMC2_2,
-#elif CONFIG_SYS_USE_NANDFLASH
-	BOOT_DEVICE_NAND,
-#elif CONFIG_SYS_USE_SERIALFLASH
-	BOOT_DEVICE_SPI,
-#endif
-};
-
-#endif
diff --git a/arch/arm/include/asm/arch-davinci/emif_defs.h b/arch/arm/include/asm/arch-davinci/emif_defs.h
deleted file mode 100644
index 7e19cfe..0000000
--- a/arch/arm/include/asm/arch-davinci/emif_defs.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _EMIF_DEFS_H_
-#define _EMIF_DEFS_H_
-
-#include <asm/arch/hardware.h>
-
-struct davinci_emif_regs {
-	u_int32_t	ercsr;
-	u_int32_t	awccr;
-	u_int32_t	sdbcr;
-	u_int32_t	sdrcr;
-	u_int32_t	ab1cr;
-	u_int32_t	ab2cr;
-	u_int32_t	ab3cr;
-	u_int32_t	ab4cr;
-	u_int32_t	sdtimr;
-	u_int32_t	ddrsr;
-	u_int32_t	ddrphycr;
-	u_int32_t	ddrphysr;
-	u_int32_t	totar;
-	u_int32_t	totactr;
-	u_int32_t	ddrphyid_rev;
-	u_int32_t	sdsretr;
-	u_int32_t	eirr;
-	u_int32_t	eimr;
-	u_int32_t	eimsr;
-	u_int32_t	eimcr;
-	u_int32_t	ioctrlr;
-	u_int32_t	iostatr;
-	u_int8_t	rsvd0[8];
-	u_int32_t	nandfcr;
-	u_int32_t	nandfsr;
-	u_int8_t	rsvd1[8];
-	u_int32_t	nandfecc[4];
-	u_int8_t	rsvd2[60];
-	u_int32_t	nand4biteccload;
-	u_int32_t	nand4bitecc[4];
-	u_int32_t	nanderradd1;
-	u_int32_t	nanderradd2;
-	u_int32_t	nanderrval1;
-	u_int32_t	nanderrval2;
-};
-
-#define davinci_emif_regs \
-	((struct davinci_emif_regs *)DAVINCI_ASYNC_EMIF_CNTRL_BASE)
-
-#define DAVINCI_NANDFCR_NAND_ENABLE(n)			(1 << (n-2))
-#define DAVINCI_NANDFCR_4BIT_ECC_SEL_MASK		(3 << 4)
-#define DAVINCI_NANDFCR_4BIT_ECC_SEL(n)			((n-2) << 4)
-#define DAVINCI_NANDFCR_1BIT_ECC_START(n)		(1 << (8 + (n-2)))
-#define DAVINCI_NANDFCR_4BIT_ECC_START			(1 << 12)
-#define DAVINCI_NANDFCR_4BIT_CALC_START			(1 << 13)
-#define DAVINCI_NANDFCR_CS2NAND				(1 << 0)
-
-/* Chip Select setup */
-#define DAVINCI_ABCR_STROBE_SELECT			(1 << 31)
-#define DAVINCI_ABCR_EXT_WAIT				(1 << 30)
-#define DAVINCI_ABCR_WSETUP(n)				(n << 26)
-#define DAVINCI_ABCR_WSTROBE(n)				(n << 20)
-#define DAVINCI_ABCR_WHOLD(n)				(n << 17)
-#define DAVINCI_ABCR_RSETUP(n)				(n << 13)
-#define DAVINCI_ABCR_RSTROBE(n)				(n << 7)
-#define DAVINCI_ABCR_RHOLD(n)				(n << 4)
-#define DAVINCI_ABCR_TA(n)				(n << 2)
-#define DAVINCI_ABCR_ASIZE_16BIT			1
-#define DAVINCI_ABCR_ASIZE_8BIT				0
-
-#endif
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index 98fe56e..a4eb0bd 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -597,7 +597,6 @@ static inline enum davinci_clk_ids get_async3_src(void)
 #if defined(CONFIG_SOC_DM365)
 #include <asm/arch/aintc_defs.h>
 #include <asm/arch/ddr2_defs.h>
-#include <asm/arch/emif_defs.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/pll_defs.h>
 #include <asm/arch/psc_defs.h>
diff --git a/arch/arm/include/asm/arch-davinci/nand_defs.h b/arch/arm/include/asm/arch-davinci/nand_defs.h
deleted file mode 100644
index dee1c6f..0000000
--- a/arch/arm/include/asm/arch-davinci/nand_defs.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts shamelesly stolen from Linux Kernel source tree.
- *
- * ------------------------------------------------------------
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _NAND_DEFS_H_
-#define _NAND_DEFS_H_
-
-#include <asm/arch/hardware.h>
-
-#ifdef CONFIG_SOC_DM646X
-#define	MASK_CLE	0x80000
-#define	MASK_ALE	0x40000
-#else
-#define	MASK_CLE	0x10
-#define	MASK_ALE	0x08
-#endif
-
-#ifdef CONFIG_SYS_NAND_MASK_CLE
-#undef MASK_CLE
-#define MASK_CLE CONFIG_SYS_NAND_MASK_CLE
-#endif
-#ifdef CONFIG_SYS_NAND_MASK_ALE
-#undef MASK_ALE
-#define MASK_ALE CONFIG_SYS_NAND_MASK_ALE
-#endif
-
-#define NAND_READ_START		0x00
-#define NAND_READ_END		0x30
-#define NAND_STATUS		0x70
-
-extern void davinci_nand_init(struct nand_chip *nand);
-
-#endif
diff --git a/arch/arm/include/asm/arch-davinci/spl.h b/arch/arm/include/asm/arch-davinci/spl.h
deleted file mode 100644
index 5afe0d4..0000000
--- a/arch/arm/include/asm/arch-davinci/spl.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2012
- * Texas Instruments, <www.ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_NAND	1
-#define BOOT_DEVICE_SPI		2
-#define BOOT_DEVICE_MMC1	3
-#define BOOT_DEVICE_MMC2	4	/* dummy */
-#define BOOT_DEVICE_MMC2_2	5	/* dummy */
-
-#endif
diff --git a/arch/arm/include/asm/arch-exynos/dmc.h b/arch/arm/include/asm/arch-exynos/dmc.h
index d78536d..ec3f9b6 100644
--- a/arch/arm/include/asm/arch-exynos/dmc.h
+++ b/arch/arm/include/asm/arch-exynos/dmc.h
@@ -467,6 +467,9 @@ enum mem_manuf {
 /* PHY_CON1 register fields */
 #define PHY_CON1_RDLVL_RDDATA_ADJ_SHIFT	0
 
+/* PHY_CON4 rgister fields */
+#define PHY_CON10_CTRL_OFFSETR3		(1 << 24)
+
 /* PHY_CON12 register fields */
 #define PHY_CON12_CTRL_START_POINT_SHIFT	24
 #define PHY_CON12_CTRL_INC_SHIFT	16
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index a4b41ad..4f2447b 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -906,8 +906,8 @@ struct exynos5420_power {
 	unsigned int	sysip_dat3;
 	unsigned char	res11[0xe0];
 	unsigned int	pmu_spare0;
-	unsigned int	pmu_spare1;
-	unsigned int	pmu_spare2;
+	unsigned int	pmu_spare1; /* Store PHY0_CON4 for read leveling */
+	unsigned int	pmu_spare2; /* Store PHY1_CON4 for read leveling */
 	unsigned int	pmu_spare3;
 	unsigned char	res12[0x4];
 	unsigned int	cg_status0;
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
index 7ac2662..50ce649 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
@@ -9,13 +9,6 @@
 #ifndef __ASM_ARCH_HARDWARE_K2HK_H
 #define __ASM_ARCH_HARDWARE_K2HK_H
 
-#define K2HK_ASYNC_EMIF_CNTRL_BASE      0x21000a00
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE   K2HK_ASYNC_EMIF_CNTRL_BASE
-#define K2HK_ASYNC_EMIF_DATA_CE0_BASE   0x30000000
-#define K2HK_ASYNC_EMIF_DATA_CE1_BASE   0x34000000
-#define K2HK_ASYNC_EMIF_DATA_CE2_BASE   0x38000000
-#define K2HK_ASYNC_EMIF_DATA_CE3_BASE   0x3c000000
-
 #define K2HK_PLL_CNTRL_BASE             0x02310000
 #define CLOCK_BASE                      K2HK_PLL_CNTRL_BASE
 #define KS2_RSTCTRL                     (K2HK_PLL_CNTRL_BASE + 0xe8)
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index 6c532ca..ffdecbf 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -22,32 +22,6 @@
 typedef volatile unsigned int   dv_reg;
 typedef volatile unsigned int   *dv_reg_p;
 
-#define ASYNC_EMIF_NUM_CS               4
-#define ASYNC_EMIF_MODE_NOR             0
-#define ASYNC_EMIF_MODE_NAND            1
-#define ASYNC_EMIF_MODE_ONENAND         2
-#define ASYNC_EMIF_PRESERVE             -1
-
-struct async_emif_config {
-	unsigned mode;
-	unsigned select_strobe;
-	unsigned extend_wait;
-	unsigned wr_setup;
-	unsigned wr_strobe;
-	unsigned wr_hold;
-	unsigned rd_setup;
-	unsigned rd_strobe;
-	unsigned rd_hold;
-	unsigned turn_around;
-	enum {
-		ASYNC_EMIF_8	= 0,
-		ASYNC_EMIF_16	= 1,
-		ASYNC_EMIF_32	= 2,
-	} width;
-};
-
-void init_async_emif(int num_cs, struct async_emif_config *config);
-
 struct ddr3_phy_config {
 	unsigned int pllcr;
 	unsigned int pgcr1_mask;
@@ -145,6 +119,10 @@ struct ddr3_emif_config {
 #define KS2_UART0_BASE                	0x02530c00
 #define KS2_UART1_BASE                	0x02531000
 
+/* AEMIF */
+#define KS2_AEMIF_CNTRL_BASE       	0x21000a00
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE   KS2_AEMIF_CNTRL_BASE
+
 #ifdef CONFIG_SOC_K2HK
 #include <asm/arch/hardware-k2hk.h>
 #endif
diff --git a/arch/arm/include/asm/arch-keystone/nand_defs.h b/arch/arm/include/asm/arch-keystone/nand_defs.h
deleted file mode 100644
index 58417db..0000000
--- a/arch/arm/include/asm/arch-keystone/nand_defs.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * nand driver definitions to re-use davinci nand driver on Keystone2
- *
- * (C) Copyright 2012-2014
- *     Texas Instruments Incorporated, <www.ti.com>
- * (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:     GPL-2.0+
- */
-#ifndef _NAND_DEFS_H_
-#define _NAND_DEFS_H_
-
-#include <asm/arch/hardware.h>
-#include <linux/mtd/nand.h>
-
-#define MASK_CLE         0x4000
-#define	MASK_ALE         0x2000
-
-#define NAND_READ_START  0x00
-#define NAND_READ_END    0x30
-#define NAND_STATUS      0x70
-
-#endif
diff --git a/arch/arm/include/asm/arch-mx35/spl.h b/arch/arm/include/asm/arch-mx35/spl.h
deleted file mode 100644
index d0efec2..0000000
--- a/arch/arm/include/asm/arch-mx35/spl.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * (C) Copyright 2012
- * Texas Instruments, <www.ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_NONE	0
-#define BOOT_DEVICE_XIP		1
-#define BOOT_DEVICE_XIPWAIT	2
-#define BOOT_DEVICE_NAND	3
-#define BOOT_DEVICE_ONENAND	4
-#define BOOT_DEVICE_MMC1	5
-#define BOOT_DEVICE_MMC2	6
-#define BOOT_DEVICE_MMC2_2	7
-#define BOOT_DEVICE_NOR		8
-#define BOOT_DEVICE_I2C		9
-#define BOOT_DEVICE_SPI		10
-
-#endif
diff --git a/arch/arm/include/asm/arch-mx5/spl.h b/arch/arm/include/asm/arch-mx5/spl.h
deleted file mode 100644
index 20c6cae..0000000
--- a/arch/arm/include/asm/arch-mx5/spl.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __ASM_ARCH_SPL_H__
-#define __ASM_ARCH_SPL_H__
-
-#define BOOT_DEVICE_NONE	0
-#define BOOT_DEVICE_NAND	1
-
-#endif	/* __ASM_ARCH_SPL_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/hab.h b/arch/arm/include/asm/arch-mx6/hab.h
index d724f20..1f12695 100644
--- a/arch/arm/include/asm/arch-mx6/hab.h
+++ b/arch/arm/include/asm/arch-mx6/hab.h
@@ -53,12 +53,17 @@ typedef void *hab_rvt_authenticate_image_t(uint8_t, ptrdiff_t,
 		void **, size_t *, hab_loader_callback_f_t);
 typedef void hapi_clock_init_t(void);
 
-#define HAB_RVT_REPORT_EVENT (*(uint32_t *)0x000000B4)
-#define HAB_RVT_REPORT_STATUS (*(uint32_t *)0x000000B8)
-#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *)0x000000A4)
-#define HAB_RVT_ENTRY (*(uint32_t *)0x00000098)
-#define HAB_RVT_EXIT (*(uint32_t *)0x0000009C)
-#define HAB_RVT_CLOCK_INIT ((hapi_clock_init_t *)0x0000024D)
+#define HAB_RVT_REPORT_EVENT                   (*(uint32_t *)0x000000B4)
+#define HAB_RVT_REPORT_STATUS                  (*(uint32_t *)0x000000B8)
+#define HAB_RVT_AUTHENTICATE_IMAGE             (*(uint32_t *)0x000000A4)
+#define HAB_RVT_ENTRY                          (*(uint32_t *)0x00000098)
+#define HAB_RVT_EXIT                           (*(uint32_t *)0x0000009C)
+
+#define HAB_RVT_REPORT_EVENT_NEW               (*(uint32_t *)0x000000B8)
+#define HAB_RVT_REPORT_STATUS_NEW              (*(uint32_t *)0x000000BC)
+#define HAB_RVT_AUTHENTICATE_IMAGE_NEW         (*(uint32_t *)0x000000A8)
+#define HAB_RVT_ENTRY_NEW                      (*(uint32_t *)0x0000009C)
+#define HAB_RVT_EXIT_NEW                       (*(uint32_t *)0x000000A0)
 
 #define HAB_CID_ROM 0 /**< ROM Caller ID */
 #define HAB_CID_UBOOT 1 /**< UBOOT Caller ID*/
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 1f19727..a69a753 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -217,6 +217,8 @@
 #define IP2APB_USBPHY2_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x7C000)
 
 #define CHIP_REV_1_0                 0x10
+#define CHIP_REV_1_2                 0x12
+#define CHIP_REV_1_5                 0x15
 #define IRAM_SIZE                    0x00040000
 #define FEC_QUIRK_ENET_MAC
 
diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h
index f9ee0d9..6a4a632 100644
--- a/arch/arm/include/asm/arch-mx6/iomux.h
+++ b/arch/arm/include/asm/arch-mx6/iomux.h
@@ -39,7 +39,7 @@
 #define IOMUXC_GPR12_LOS_LEVEL_MASK		(0x1f << 4)
 #define IOMUXC_GPR12_APPS_LTSSM_ENABLE		(1 << 10)
 #define IOMUXC_GPR12_DEVICE_TYPE_EP		(0x0 << 12)
-#define IOMUXC_GPR12_DEVICE_TYPE_RC		(0x2 << 12)
+#define IOMUXC_GPR12_DEVICE_TYPE_RC		(0x4 << 12)
 #define IOMUXC_GPR12_DEVICE_TYPE_MASK		(0xf << 12)
 
 /*
diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
index 43d377a..d544d2e 100644
--- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h
+++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
@@ -6,6 +6,7 @@
 #ifndef __ASM_ARCH_MX6_DDR_H__
 #define __ASM_ARCH_MX6_DDR_H__
 
+#ifndef CONFIG_SPL_BUILD
 #ifdef CONFIG_MX6Q
 #include "mx6q-ddr.h"
 #else
@@ -15,6 +16,236 @@
 #error "Please select cpu"
 #endif	/* CONFIG_MX6DL or CONFIG_MX6S */
 #endif	/* CONFIG_MX6Q */
+#else
+
+/* MMDC P0/P1 Registers */
+struct mmdc_p_regs {
+	u32 mdctl;
+	u32 mdpdc;
+	u32 mdotc;
+	u32 mdcfg0;
+	u32 mdcfg1;
+	u32 mdcfg2;
+	u32 mdmisc;
+	u32 mdscr;
+	u32 mdref;
+	u32 res1[2];
+	u32 mdrwd;
+	u32 mdor;
+	u32 res2[3];
+	u32 mdasp;
+	u32 res3[240];
+	u32 mapsr;
+	u32 res4[254];
+	u32 mpzqhwctrl;
+	u32 res5[2];
+	u32 mpwldectrl0;
+	u32 mpwldectrl1;
+	u32 res6;
+	u32 mpodtctrl;
+	u32 mprddqby0dl;
+	u32 mprddqby1dl;
+	u32 mprddqby2dl;
+	u32 mprddqby3dl;
+	u32 res7[4];
+	u32 mpdgctrl0;
+	u32 mpdgctrl1;
+	u32 res8;
+	u32 mprddlctl;
+	u32 res9;
+	u32 mpwrdlctl;
+	u32 res10[25];
+	u32 mpmur0;
+};
+
+/*
+ * MMDC iomux registers (pinctl/padctl) - (different for IMX6DQ vs IMX6SDL)
+ */
+#define MX6DQ_IOM_DDR_BASE      0x020e0500
+struct mx6dq_iomux_ddr_regs {
+	u32 res1[3];
+	u32 dram_sdqs5;
+	u32 dram_dqm5;
+	u32 dram_dqm4;
+	u32 dram_sdqs4;
+	u32 dram_sdqs3;
+	u32 dram_dqm3;
+	u32 dram_sdqs2;
+	u32 dram_dqm2;
+	u32 res2[16];
+	u32 dram_cas;
+	u32 res3[2];
+	u32 dram_ras;
+	u32 dram_reset;
+	u32 res4[2];
+	u32 dram_sdclk_0;
+	u32 dram_sdba2;
+	u32 dram_sdcke0;
+	u32 dram_sdclk_1;
+	u32 dram_sdcke1;
+	u32 dram_sdodt0;
+	u32 dram_sdodt1;
+	u32 res5;
+	u32 dram_sdqs0;
+	u32 dram_dqm0;
+	u32 dram_sdqs1;
+	u32 dram_dqm1;
+	u32 dram_sdqs6;
+	u32 dram_dqm6;
+	u32 dram_sdqs7;
+	u32 dram_dqm7;
+};
+
+#define MX6DQ_IOM_GRP_BASE      0x020e0700
+struct mx6dq_iomux_grp_regs {
+	u32 res1[18];
+	u32 grp_b7ds;
+	u32 grp_addds;
+	u32 grp_ddrmode_ctl;
+	u32 res2;
+	u32 grp_ddrpke;
+	u32 res3[6];
+	u32 grp_ddrmode;
+	u32 res4[3];
+	u32 grp_b0ds;
+	u32 grp_b1ds;
+	u32 grp_ctlds;
+	u32 res5;
+	u32 grp_b2ds;
+	u32 grp_ddr_type;
+	u32 grp_b3ds;
+	u32 grp_b4ds;
+	u32 grp_b5ds;
+	u32 grp_b6ds;
+};
+
+#define MX6SDL_IOM_DDR_BASE     0x020e0400
+struct mx6sdl_iomux_ddr_regs {
+	u32 res1[25];
+	u32 dram_cas;
+	u32 res2[2];
+	u32 dram_dqm0;
+	u32 dram_dqm1;
+	u32 dram_dqm2;
+	u32 dram_dqm3;
+	u32 dram_dqm4;
+	u32 dram_dqm5;
+	u32 dram_dqm6;
+	u32 dram_dqm7;
+	u32 dram_ras;
+	u32 dram_reset;
+	u32 res3[2];
+	u32 dram_sdba2;
+	u32 dram_sdcke0;
+	u32 dram_sdcke1;
+	u32 dram_sdclk_0;
+	u32 dram_sdclk_1;
+	u32 dram_sdodt0;
+	u32 dram_sdodt1;
+	u32 dram_sdqs0;
+	u32 dram_sdqs1;
+	u32 dram_sdqs2;
+	u32 dram_sdqs3;
+	u32 dram_sdqs4;
+	u32 dram_sdqs5;
+	u32 dram_sdqs6;
+	u32 dram_sdqs7;
+};
+
+#define MX6SDL_IOM_GRP_BASE     0x020e0700
+struct mx6sdl_iomux_grp_regs {
+	u32 res1[18];
+	u32 grp_b7ds;
+	u32 grp_addds;
+	u32 grp_ddrmode_ctl;
+	u32 grp_ddrpke;
+	u32 res2[2];
+	u32 grp_ddrmode;
+	u32 grp_b0ds;
+	u32 res3;
+	u32 grp_ctlds;
+	u32 grp_b1ds;
+	u32 grp_ddr_type;
+	u32 grp_b2ds;
+	u32 grp_b3ds;
+	u32 grp_b4ds;
+	u32 grp_b5ds;
+	u32 res4;
+	u32 grp_b6ds;
+};
+
+/* Device Information: Varies per DDR3 part number and speed grade */
+struct mx6_ddr3_cfg {
+	u16 mem_speed;	/* ie 1600 for DDR3-1600 (800,1066,1333,1600) */
+	u8 density;	/* chip density (Gb) (1,2,4,8) */
+	u8 width;	/* bus width (bits) (4,8,16) */
+	u8 banks;	/* number of banks */
+	u8 rowaddr;	/* row address bits (11-16)*/
+	u8 coladdr;	/* col address bits (9-12) */
+	u8 pagesz;	/* page size (K) (1-2) */
+	u16 trcd;	/* tRCD=tRP=CL (ns*100) */
+	u16 trcmin;	/* tRC min (ns*100) */
+	u16 trasmin;	/* tRAS min (ns*100) */
+	u8 SRT;		/* self-refresh temperature: 0=normal, 1=extended */
+};
+
+/* System Information: Varies per board design, layout, and term choices */
+struct mx6_ddr_sysinfo {
+	u8 dsize;	/* size of bus (in dwords: 0=16bit,1=32bit,2=64bit) */
+	u8 cs_density;	/* density per chip select (Gb) */
+	u8 ncs;		/* number chip selects used (1|2) */
+	char cs1_mirror;/* enable address mirror (0|1) */
+	char bi_on;	/* Bank interleaving enable */
+	u8 rtt_nom;	/* Rtt_Nom (DDR3_RTT_*) */
+	u8 rtt_wr;	/* Rtt_Wr (DDR3_RTT_*) */
+	u8 ralat;	/* Read Additional Latency (0-7) */
+	u8 walat;	/* Write Additional Latency (0-3) */
+	u8 mif3_mode;	/* Command prediction working mode */
+	u8 rst_to_cke;	/* Time from SDE enable to CKE rise */
+	u8 sde_to_rst;	/* Time from SDE enable until DDR reset# is high */
+};
+
+/*
+ * Board specific calibration:
+ *   This includes write leveling calibration values as well as DQS gating
+ *   and read/write delays. These values are board/layout/device specific.
+ *   Freescale recommends using the i.MX6 DDR Stress Test Tool V1.0.2
+ *   (DOC-96412) to determine these values over a range of boards and
+ *   temperatures.
+ */
+struct mx6_mmdc_calibration {
+	/* write leveling calibration */
+	u32 p0_mpwldectrl0;
+	u32 p0_mpwldectrl1;
+	u32 p1_mpwldectrl0;
+	u32 p1_mpwldectrl1;
+	/* read DQS gating */
+	u32 p0_mpdgctrl0;
+	u32 p0_mpdgctrl1;
+	u32 p1_mpdgctrl0;
+	u32 p1_mpdgctrl1;
+	/* read delay */
+	u32 p0_mprddlctl;
+	u32 p1_mprddlctl;
+	/* write delay */
+	u32 p0_mpwrdlctl;
+	u32 p1_mpwrdlctl;
+};
+
+/* configure iomux (pinctl/padctl) */
+void mx6dq_dram_iocfg(unsigned width,
+		      const struct mx6dq_iomux_ddr_regs *,
+		      const struct mx6dq_iomux_grp_regs *);
+void mx6sdl_dram_iocfg(unsigned width,
+		       const struct mx6sdl_iomux_ddr_regs *,
+		       const struct mx6sdl_iomux_grp_regs *);
+
+/* configure mx6 mmdc registers */
+void mx6_dram_cfg(const struct mx6_ddr_sysinfo *,
+		  const struct mx6_mmdc_calibration *,
+		  const struct mx6_ddr3_cfg *);
+
+#endif /* CONFIG_SPL_BUILD */
 
 #define MX6_MMDC_P0_MDCTL	0x021b0000
 #define MX6_MMDC_P0_MDPDC	0x021b0004
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
index 38851a1..42d30f5 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -11,7 +11,9 @@
 #include <asm/imx-common/regs-common.h>
 #include "../arch-imx/cpu.h"
 
-#define is_soc_rev(rev)	((get_cpu_rev() & 0xFF) - rev)
+#define soc_rev() (get_cpu_rev() & 0xFF)
+#define is_soc_rev(rev)        (soc_rev() - rev)
+
 u32 get_cpu_rev(void);
 
 /* returns MXC_CPU_ value */
diff --git a/arch/arm/include/asm/arch-tegra114/spl.h b/arch/arm/include/asm/arch-tegra114/spl.h
deleted file mode 100644
index ebb16fe..0000000
--- a/arch/arm/include/asm/arch-tegra114/spl.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_RAM         1
-
-#endif
diff --git a/arch/arm/include/asm/arch-tegra124/spl.h b/arch/arm/include/asm/arch-tegra124/spl.h
deleted file mode 100644
index e266395..0000000
--- a/arch/arm/include/asm/arch-tegra124/spl.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * (C) Copyright 2010-2013
- * NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier:     GPL-2.0+
- */
-
-#ifndef _ASM_ARCH_SPL_H_
-#define _ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_RAM 1
-
-#endif /* _ASM_ARCH_SPL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/spl.h b/arch/arm/include/asm/arch-tegra20/spl.h
deleted file mode 100644
index 8953b00..0000000
--- a/arch/arm/include/asm/arch-tegra20/spl.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * (C) Copyright 2012
- * NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_RAM         1
-
-#endif
diff --git a/arch/arm/include/asm/arch-tegra30/spl.h b/arch/arm/include/asm/arch-tegra30/spl.h
deleted file mode 100644
index 8953b00..0000000
--- a/arch/arm/include/asm/arch-tegra30/spl.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * (C) Copyright 2012
- * NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_RAM         1
-
-#endif
diff --git a/arch/arm/include/asm/arch-tnetv107x/emif_defs.h b/arch/arm/include/asm/arch-tnetv107x/emif_defs.h
deleted file mode 100644
index 9969a01..0000000
--- a/arch/arm/include/asm/arch-tnetv107x/emif_defs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/arch-davinci/emif_defs.h>
diff --git a/arch/arm/include/asm/arch-tnetv107x/hardware.h b/arch/arm/include/asm/arch-tnetv107x/hardware.h
index 2a7ca4e..d458e0b 100644
--- a/arch/arm/include/asm/arch-tnetv107x/hardware.h
+++ b/arch/arm/include/asm/arch-tnetv107x/hardware.h
@@ -155,4 +155,6 @@ int wdt_kick(void);
 #define INTC_HINT_EN			(TNETV107X_INTC_BASE + 0x1500)
 #define INTC_EN_CLR0			(TNETV107X_INTC_BASE + 0x380)
 
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE	TNETV107X_ASYNC_EMIF_CNTRL_BASE
+
 #endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-tnetv107x/nand_defs.h b/arch/arm/include/asm/arch-tnetv107x/nand_defs.h
deleted file mode 100644
index b298fba..0000000
--- a/arch/arm/include/asm/arch-tnetv107x/nand_defs.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * TNETV107X: NAND definitions
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _NAND_DEFS_H_
-#define _NAND_DEFS_H_
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/emif_defs.h>
-
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE	TNETV107X_ASYNC_EMIF_CNTRL_BASE
-
-#define	MASK_CLE		0x4000
-#define	MASK_ALE		0x2000
-
-#define NAND_READ_START		0x00
-#define NAND_READ_END		0x30
-#define NAND_STATUS		0x70
-
-extern void davinci_nand_init(struct nand_chip *nand);
-
-#endif
diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
index e17c7d1..5256624 100644
--- a/arch/arm/include/asm/arch-vf610/crm_regs.h
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -150,6 +150,9 @@ struct anadig_reg {
 #define CCM_CACRR_ARM_CLK_DIV_MASK		0x7
 #define CCM_CACRR_ARM_CLK_DIV(v)		((v) & 0x7)
 
+#define CCM_CSCMR1_QSPI0_CLK_SEL_OFFSET		22
+#define CCM_CSCMR1_QSPI0_CLK_SEL_MASK		(0x3 << 22)
+#define CCM_CSCMR1_QSPI0_CLK_SEL(v)		(((v) & 0x3) << 22)
 #define CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET	18
 #define CCM_CSCMR1_ESDHC1_CLK_SEL_MASK		(0x3 << 18)
 #define CCM_CSCMR1_ESDHC1_CLK_SEL(v)		(((v) & 0x3) << 18)
@@ -161,6 +164,11 @@ struct anadig_reg {
 #define CCM_CSCDR2_ESDHC1_CLK_DIV_MASK		(0xf << 20)
 #define CCM_CSCDR2_ESDHC1_CLK_DIV(v)		(((v) & 0xf) << 20)
 
+#define CCM_CSCDR3_QSPI0_EN			(1 << 4)
+#define CCM_CSCDR3_QSPI0_DIV(v)			((v) << 3)
+#define CCM_CSCDR3_QSPI0_X2_DIV(v)		((v) << 2)
+#define CCM_CSCDR3_QSPI0_X4_DIV(v)		((v) & 0x3)
+
 #define CCM_CSCMR2_RMII_CLK_SEL_OFFSET		4
 #define CCM_CSCMR2_RMII_CLK_SEL_MASK		(0x3 << 4)
 #define CCM_CSCMR2_RMII_CLK_SEL(v)		(((v) & 0x3) << 4)
@@ -170,6 +178,7 @@ struct anadig_reg {
 #define CCM_CCGR0_UART1_CTRL_MASK		(0x3 << 16)
 #define CCM_CCGR1_PIT_CTRL_MASK			(0x3 << 14)
 #define CCM_CCGR1_WDOGA5_CTRL_MASK		(0x3 << 28)
+#define CCM_CCGR2_QSPI0_CTRL_MASK		(0x3 << 8)
 #define CCM_CCGR2_IOMUXC_CTRL_MASK		(0x3 << 16)
 #define CCM_CCGR2_PORTA_CTRL_MASK		(0x3 << 18)
 #define CCM_CCGR2_PORTB_CTRL_MASK		(0x3 << 20)
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index 0c28e1b..bd6f680 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -87,6 +87,8 @@
 #define ENET_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00050000)
 #define ENET1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00051000)
 
+#define QSPI0_AMBA_BASE		0x20000000
+
 /* MUX mode and PAD ctrl are in one register */
 #define CONFIG_IOMUX_SHARE_CONF_REG
 
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index 88807d8..a965641 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -20,6 +20,9 @@
 #define VF610_I2C_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \
 				PAD_CTL_SPEED_HIGH | PAD_CTL_OBE_IBE_ENABLE)
 
+#define VF610_QSPI_PAD_CTRL	(PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_150ohm | \
+				PAD_CTL_PUS_22K_UP | PAD_CTL_OBE_IBE_ENABLE)
+
 enum {
 	VF610_PAD_PTA6__RMII0_CLKIN		= IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTA6__RMII0_CLKOUT		= IOMUX_PAD(0x0000, 0x0000, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -53,6 +56,18 @@ enum {
 	VF610_PAD_PTA29__ESDHC1_DAT3		= IOMUX_PAD(0x004c, 0x004c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
 	VF610_PAD_PTB14__I2C0_SCL		= IOMUX_PAD(0x0090, 0x0090, 2, 0x033c, 1, VF610_I2C_PAD_CTRL),
 	VF610_PAD_PTB15__I2C0_SDA		= IOMUX_PAD(0x0094, 0x0094, 2, 0x0340, 1, VF610_I2C_PAD_CTRL),
+	VF610_PAD_PTD0__QSPI0_A_QSCK		= IOMUX_PAD(0x013c, 0x013c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD1__QSPI0_A_CS0		= IOMUX_PAD(0x0140, 0x0140, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD2__QSPI0_A_DATA3		= IOMUX_PAD(0x0144, 0x0144, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD3__QSPI0_A_DATA2		= IOMUX_PAD(0x0148, 0x0148, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD4__QSPI0_A_DATA1		= IOMUX_PAD(0x014c, 0x014c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD5__QSPI0_A_DATA0		= IOMUX_PAD(0x0150, 0x0150, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD7__QSPI0_B_QSCK		= IOMUX_PAD(0x0158, 0x0158, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD8__QSPI0_B_CS0		= IOMUX_PAD(0x015c, 0x015c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD9__QSPI0_B_DATA3		= IOMUX_PAD(0x0160, 0x0160, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD10__QSPI0_B_DATA2		= IOMUX_PAD(0x0164, 0x0164, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD11__QSPI0_B_DATA1		= IOMUX_PAD(0x0168, 0x0168, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD12__QSPI0_B_DATA0		= IOMUX_PAD(0x016c, 0x016c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
 	VF610_PAD_DDR_A15__DDR_A_15		= IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 	VF610_PAD_DDR_A14__DDR_A_14		= IOMUX_PAD(0x0224, 0x0224, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 	VF610_PAD_DDR_A13__DDR_A_13		= IOMUX_PAD(0x0228, 0x0228, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index cca920b..e91d4ac 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -123,12 +123,14 @@ typedef u64 iomux_v3_cfg_t;
 #define PAD_CTL_SPEED_MED	(1 << 12)
 #define PAD_CTL_SPEED_HIGH	(3 << 12)
 
+#define PAD_CTL_DSE_150ohm	(1 << 6)
 #define PAD_CTL_DSE_50ohm	(3 << 6)
 #define PAD_CTL_DSE_25ohm	(6 << 6)
 #define PAD_CTL_DSE_20ohm	(7 << 6)
 
 #define PAD_CTL_PUS_47K_UP	(1 << 4 | PAD_CTL_PUE)
 #define PAD_CTL_PUS_100K_UP	(2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP	(3 << 4 | PAD_CTL_PUE)
 #define PAD_CTL_PKE		(1 << 3)
 #define PAD_CTL_PUE		(1 << 2 | PAD_CTL_PKE)
 
@@ -175,4 +177,29 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
 void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
 				     unsigned count);
 
+/* macros for declaring and using pinmux array */
+#if defined(CONFIG_MX6QDL)
+#define IOMUX_PADS(x) (MX6Q_##x), (MX6DL_##x)
+#define SETUP_IOMUX_PAD(def)					\
+if (is_cpu_type(MXC_CPU_MX6Q)) {				\
+	imx_iomux_v3_setup_pad(MX6Q_##def);			\
+} else {							\
+	imx_iomux_v3_setup_pad(MX6DL_##def);			\
+}
+#define SETUP_IOMUX_PADS(x)					\
+	imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)/2)
+#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#define IOMUX_PADS(x) MX6Q_##x
+#define SETUP_IOMUX_PAD(def)					\
+	imx_iomux_v3_setup_pad(MX6Q_##def);
+#define SETUP_IOMUX_PADS(x)					\
+	imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
+#else
+#define IOMUX_PADS(x) MX6DL_##x
+#define SETUP_IOMUX_PAD(def)					\
+	imx_iomux_v3_setup_pad(MX6DL_##def);
+#define SETUP_IOMUX_PADS(x)					\
+	imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
+#endif
+
 #endif	/* __MACH_IOMUX_V3_H__*/
diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h
index 90e5a9d..18a319d 100644
--- a/arch/arm/include/asm/spl.h
+++ b/arch/arm/include/asm/spl.h
@@ -7,9 +7,29 @@
 #ifndef	_ASM_SPL_H_
 #define	_ASM_SPL_H_
 
+#if defined(CONFIG_OMAP) || defined(CONFIG_SOCFPGA) || defined(CONFIG_ZYNQ) \
+	|| defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \
+	|| defined(CONFIG_EXYNOS4210)
 /* Platform-specific defines */
 #include <asm/arch/spl.h>
 
+#else
+enum {
+	BOOT_DEVICE_RAM,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_MMC2_2,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_NOR,
+	BOOT_DEVICE_UART,
+	BOOT_DEVICE_SPI,
+	BOOT_DEVICE_SATA,
+	BOOT_DEVICE_I2C,
+	BOOT_DEVICE_NONE
+};
+#endif
+
 /* Linker symbols. */
 extern char __bss_start[], __bss_end[];
 
diff --git a/arch/arm/include/asm/arch-keystone/emif_defs.h b/arch/arm/include/asm/ti-common/davinci_nand.h
index a3378aa..11407be 100644
--- a/arch/arm/include/asm/arch-keystone/emif_defs.h
+++ b/arch/arm/include/asm/ti-common/davinci_nand.h
@@ -1,23 +1,45 @@
 /*
- * emif definitions to re-use davinci emif driver on Keystone2
+ * NAND Flash Driver
  *
- * (C) Copyright 2012-2014
- *     Texas Instruments Incorporated, <www.ti.com>
- * (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net>
+ * Copyright (C) 2006-2014 Texas Instruments.
  *
- * SPDX-License-Identifier:     GPL-2.0+
+ * Based on Linux DaVinci NAND driver by TI.
  */
-#ifndef _EMIF_DEFS_H_
-#define _EMIF_DEFS_H_
 
+#ifndef _DAVINCI_NAND_H_
+#define _DAVINCI_NAND_H_
+
+#include <linux/mtd/nand.h>
 #include <asm/arch/hardware.h>
 
+#define NAND_READ_START  	0x00
+#define NAND_READ_END    	0x30
+#define NAND_STATUS      	0x70
+
+#define MASK_CLE		0x10
+#define MASK_ALE		0x08
+
+#ifdef CONFIG_SYS_NAND_MASK_CLE
+#undef MASK_CLE
+#define MASK_CLE CONFIG_SYS_NAND_MASK_CLE
+#endif
+#ifdef CONFIG_SYS_NAND_MASK_ALE
+#undef MASK_ALE
+#define MASK_ALE CONFIG_SYS_NAND_MASK_ALE
+#endif
+
 struct davinci_emif_regs {
 	uint32_t	ercsr;
 	uint32_t	awccr;
 	uint32_t	sdbcr;
 	uint32_t	sdrcr;
-	uint32_t	abncr[4];
+	union {
+		uint32_t abncr[4];
+		uint32_t ab1cr;
+		uint32_t ab2cr;
+		uint32_t ab3cr;
+		uint32_t ab4cr;
+	};
 	uint32_t	sdtimr;
 	uint32_t	ddrsr;
 	uint32_t	ddrphycr;
@@ -56,18 +78,21 @@ struct davinci_emif_regs {
 #define DAVINCI_NANDFCR_1BIT_ECC_START(n)		(1 << (8 + ((n) - 2)))
 #define DAVINCI_NANDFCR_4BIT_ECC_START			(1 << 12)
 #define DAVINCI_NANDFCR_4BIT_CALC_START			(1 << 13)
+#define DAVINCI_NANDFCR_CS2NAND				(1 << 0)
 
 /* Chip Select setup */
 #define DAVINCI_ABCR_STROBE_SELECT			(1 << 31)
 #define DAVINCI_ABCR_EXT_WAIT				(1 << 30)
-#define DAVINCI_ABCR_WSETUP(n)				((n) << 26)
-#define DAVINCI_ABCR_WSTROBE(n)				((n) << 20)
-#define DAVINCI_ABCR_WHOLD(n)				((n) << 17)
-#define DAVINCI_ABCR_RSETUP(n)				((n) << 13)
-#define DAVINCI_ABCR_RSTROBE(n)				((n) << 7)
-#define DAVINCI_ABCR_RHOLD(n)				((n) << 4)
-#define DAVINCI_ABCR_TA(n)				((n) << 2)
+#define DAVINCI_ABCR_WSETUP(n)				(n << 26)
+#define DAVINCI_ABCR_WSTROBE(n)				(n << 20)
+#define DAVINCI_ABCR_WHOLD(n)				(n << 17)
+#define DAVINCI_ABCR_RSETUP(n)				(n << 13)
+#define DAVINCI_ABCR_RSTROBE(n)				(n << 7)
+#define DAVINCI_ABCR_RHOLD(n)				(n << 4)
+#define DAVINCI_ABCR_TA(n)				(n << 2)
 #define DAVINCI_ABCR_ASIZE_16BIT			1
 #define DAVINCI_ABCR_ASIZE_8BIT				0
 
+void davinci_nand_init(struct nand_chip *nand);
+
 #endif
diff --git a/arch/arm/include/asm/ti-common/ti-aemif.h b/arch/arm/include/asm/ti-common/ti-aemif.h
new file mode 100644
index 0000000..4a311d4
--- /dev/null
+++ b/arch/arm/include/asm/ti-common/ti-aemif.h
@@ -0,0 +1,39 @@
+/*
+ * AEMIF definitions
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _AEMIF_H_
+#define _AEMIF_H_
+
+#define AEMIF_NUM_CS               4
+#define AEMIF_MODE_NOR             0
+#define AEMIF_MODE_NAND            1
+#define AEMIF_MODE_ONENAND         2
+#define AEMIF_PRESERVE             -1
+
+struct aemif_config {
+	unsigned mode;
+	unsigned select_strobe;
+	unsigned extend_wait;
+	unsigned wr_setup;
+	unsigned wr_strobe;
+	unsigned wr_hold;
+	unsigned rd_setup;
+	unsigned rd_strobe;
+	unsigned rd_hold;
+	unsigned turn_around;
+	enum {
+		AEMIF_WIDTH_8	= 0,
+		AEMIF_WIDTH_16	= 1,
+		AEMIF_WIDTH_32	= 2,
+	} width;
+};
+
+void aemif_init(int num_cs, struct aemif_config *config);
+
+#endif
diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S
index d68cc47..e6538ef 100644
--- a/arch/arm/lib/vectors.S
+++ b/arch/arm/lib/vectors.S
@@ -43,8 +43,6 @@
  *************************************************************************
  */
 
-_start:
-
 #ifdef CONFIG_SYS_DV_NOR_BOOT_CFG
 	.word	CONFIG_SYS_DV_NOR_BOOT_CFG
 #endif
diff --git a/arch/avr32/cpu/cache.c b/arch/avr32/cpu/cache.c
index ab0374e..b3ffc33 100644
--- a/arch/avr32/cpu/cache.c
+++ b/arch/avr32/cpu/cache.c
@@ -24,31 +24,31 @@ void dcache_clean_range(volatile void *start, size_t size)
 	sync_write_buffer();
 }
 
-void dcache_invalidate_range(volatile void *start, size_t size)
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
 {
-	unsigned long v, begin, end, linesz;
+	unsigned long v, linesz;
 
 	linesz = CONFIG_SYS_DCACHE_LINESZ;
 
 	/* You asked for it, you got it */
-	begin = (unsigned long)start & ~(linesz - 1);
-	end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1);
+	start = start & ~(linesz - 1);
+	stop = (stop + linesz - 1) & ~(linesz - 1);
 
-	for (v = begin; v < end; v += linesz)
+	for (v = start; v < stop; v += linesz)
 		dcache_invalidate_line((void *)v);
 }
 
-void dcache_flush_range(volatile void *start, size_t size)
+void flush_dcache_range(unsigned long start, unsigned long stop)
 {
-	unsigned long v, begin, end, linesz;
+	unsigned long v, linesz;
 
 	linesz = CONFIG_SYS_DCACHE_LINESZ;
 
 	/* You asked for it, you got it */
-	begin = (unsigned long)start & ~(linesz - 1);
-	end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1);
+	start = start & ~(linesz - 1);
+	stop = (stop + linesz - 1) & ~(linesz - 1);
 
-	for (v = begin; v < end; v += linesz)
+	for (v = start; v < stop; v += linesz)
 		dcache_flush_line((void *)v);
 
 	sync_write_buffer();
diff --git a/arch/avr32/include/asm/arch-at32ap700x/cacheflush.h b/arch/avr32/include/asm/arch-at32ap700x/cacheflush.h
index 13d6d3a..e08cd9d 100644
--- a/arch/avr32/include/asm/arch-at32ap700x/cacheflush.h
+++ b/arch/avr32/include/asm/arch-at32ap700x/cacheflush.h
@@ -49,9 +49,7 @@ static inline void icache_invalidate_line(volatile void *vaddr)
  * Applies the above functions on all lines that are touched by the
  * specified virtual address range.
  */
-void dcache_invalidate_range(volatile void *start, size_t len);
 void dcache_clean_range(volatile void *start, size_t len);
-void dcache_flush_range(volatile void *start, size_t len);
 void icache_invalidate_range(volatile void *start, size_t len);
 
 static inline void dcache_flush_unlocked(void)
diff --git a/arch/avr32/include/asm/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h
index 95ea81f..dbdd2fe 100644
--- a/arch/avr32/include/asm/dma-mapping.h
+++ b/arch/avr32/include/asm/dma-mapping.h
@@ -23,13 +23,15 @@ static inline unsigned long dma_map_single(volatile void *vaddr, size_t len,
 
 	switch (dir) {
 	case DMA_BIDIRECTIONAL:
-		dcache_flush_range(vaddr, len);
+		flush_dcache_range((unsigned long)vaddr,
+				   (unsigned long)vaddr + len);
 		break;
 	case DMA_TO_DEVICE:
 		dcache_clean_range(vaddr, len);
 		break;
 	case DMA_FROM_DEVICE:
-		dcache_invalidate_range(vaddr, len);
+		invalidate_dcache_range((unsigned long)vaddr,
+					(unsigned long)vaddr + len);
 		break;
 	default:
 		/* This will cause a linker error */
diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c
index 7680102..bf0997f 100644
--- a/arch/avr32/lib/board.c
+++ b/arch/avr32/lib/board.c
@@ -65,8 +65,8 @@ static void dma_alloc_init(void)
 	printf("DMA: Using memory from 0x%08lx to 0x%08lx\n",
 	       dma_alloc_start, dma_alloc_end);
 
-	dcache_invalidate_range(cached(dma_alloc_start),
-				dma_alloc_end - dma_alloc_start);
+	invalidate_dcache_range((unsigned long)cached(dma_alloc_start),
+				dma_alloc_end);
 }
 
 void *dma_alloc_coherent(size_t len, unsigned long *handle)