summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorMike Frysinger <vapier@gentoo.org>2010-12-17 16:23:59 -0500
committerMike Frysinger <vapier@gentoo.org>2011-04-08 00:44:26 -0400
commitbaaa4f9ce288f7a39adf4c9a4d7f2c2ad7a1cfc8 (patch)
tree93488b633a0407392770d73b19b0a6de6d36e92e /arch
parentdbb6d366e30e1292f51bb3265f80667a04fc0825 (diff)
downloadu-boot-imx-baaa4f9ce288f7a39adf4c9a4d7f2c2ad7a1cfc8.zip
u-boot-imx-baaa4f9ce288f7a39adf4c9a4d7f2c2ad7a1cfc8.tar.gz
u-boot-imx-baaa4f9ce288f7a39adf4c9a4d7f2c2ad7a1cfc8.tar.bz2
Blackfin: serial: clean up muxing a bit
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Diffstat (limited to 'arch')
-rw-r--r--arch/blackfin/cpu/serial.h51
1 files changed, 20 insertions, 31 deletions
diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/cpu/serial.h
index f9e311f..b0cf09a 100644
--- a/arch/blackfin/cpu/serial.h
+++ b/arch/blackfin/cpu/serial.h
@@ -74,23 +74,19 @@ struct bfin_mmr_serial {
};
#undef __BFP
-#ifndef UART_LSR
-# if (CONFIG_UART_CONSOLE == 3)
-# define UART_BASE UART3_DLL
-# elif (CONFIG_UART_CONSOLE == 2)
-# define UART_BASE UART2_DLL
-# elif (CONFIG_UART_CONSOLE == 1)
-# define UART_BASE UART1_DLL
-# elif (CONFIG_UART_CONSOLE == 0)
-# define UART_BASE UART0_DLL
-# endif
+#define __PASTE_UART(num, pfx, sfx) pfx##num##_##sfx
+#define _PASTE_UART(num, pfx, sfx) __PASTE_UART(num, pfx, sfx)
+#define MMR_UART(mmr) _PASTE_UART(CONFIG_UART_CONSOLE, UART, DLL)
+#define P_UART(pin) _PASTE_UART(CONFIG_UART_CONSOLE, P_UART, pin)
+
+#ifndef UART_DLL
+# define UART_DLL MMR_UART(DLL)
#else
# if CONFIG_UART_CONSOLE != 0
# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART
# endif
-# define UART_BASE UART_DLL
#endif
-#define pUART ((volatile struct bfin_mmr_serial *)UART_BASE)
+#define pUART ((volatile struct bfin_mmr_serial *)UART_DLL)
#ifdef __ADSPBF54x__
# define ACCESS_LATCH()
@@ -106,18 +102,7 @@ __attribute__((always_inline))
static inline void serial_do_portmux(void)
{
if (!BFIN_DEBUG_EARLY_SERIAL) {
- const unsigned short pins[] = {
-#if CONFIG_UART_CONSOLE == 0
- P_UART0_TX, P_UART0_RX,
-#elif CONFIG_UART_CONSOLE == 1
- P_UART1_TX, P_UART1_RX,
-#elif CONFIG_UART_CONSOLE == 2
- P_UART2_TX, P_UART2_RX,
-#elif CONFIG_UART_CONSOLE == 3
- P_UART3_TX, P_UART3_RX,
-#endif
- 0,
- };
+ const unsigned short pins[] = { P_UART(RX), P_UART(TX), 0, };
peripheral_request_list(pins, "bfin-uart");
return;
}
@@ -141,13 +126,11 @@ static inline void serial_do_portmux(void)
}
SSYNC();
#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
-# define DO_MUX(func, tx, rx) \
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~(func)); \
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | PF##tx | PF##rx);
- switch (CONFIG_UART_CONSOLE) {
- case 0: DO_MUX(PFDE, 0, 1); break;
- case 1: DO_MUX(PFTE, 2, 3); break;
- }
+ const uint16_t func[] = { PFDE, PFTE, };
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~func[CONFIG_UART_CONSOLE]);
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() |
+ (1 << P_IDENT(P_UART(RX))) |
+ (1 << P_IDENT(P_UART(TX))));
SSYNC();
#elif defined(__ADSPBF54x__)
# define DO_MUX(port, tx, rx) \
@@ -160,6 +143,12 @@ static inline void serial_do_portmux(void)
case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */
}
SSYNC();
+#elif defined(__ADSPBF561__)
+ /* UART pins could be GPIO, but they aren't pin muxed. */
+#else
+# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED)
+# error "missing portmux logic for UART"
+# endif
#endif
}