Merge branch 'master' of git://git.denx.de/u-boot-arm

104 files changed, 497 insertions, 2686 deletions

diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index 21c1e33..4e165bf 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -33,9 +33,6 @@ STANDALONE_LOAD_ADDR = 0xc100000
 endif
 endif
 
-ifdef CONFIG_SYS_ARM_WITHOUT_RELOC
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_ARM_WITHOUT_RELOC
-endif
 PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__
 
 # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
@@ -68,9 +65,7 @@ endif
 endif
 LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds
 
-ifndef CONFIG_SYS_ARM_WITHOUT_RELOC
 # needed for relocation
 ifndef CONFIG_NAND_SPL
 PLATFORM_LDFLAGS += -pie
 endif
-endif
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 29ed065..aecc943 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -28,6 +28,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 .globl _start
@@ -131,14 +132,11 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
 	.word	0x0badc0de
-#endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /*
  * the actual reset code
  */
@@ -217,7 +215,6 @@ stack_setup:
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -237,13 +234,13 @@ copy_loop:
 	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
 	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
 fixloop:
-	ldr	r0, [r2]	/* r0 <- location to fix up, IN FLASH! */
-	add	r0, r9		/* r0 <- location to fix up in RAM */
+	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
+	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
 	ldr	r1, [r2, #4]
 	and	r8, r1, #0xff
-	cmp	r8, #23		/* relative fixup? */
+	cmp	r8, #23			/* relative fixup? */
 	beq	fixrel
-	cmp	r8, #2		/* absolute fixup? */
+	cmp	r8, #2			/* absolute fixup? */
 	beq	fixabs
 	/* ignore unknown type of fixup */
 	b	fixnext
@@ -260,11 +257,10 @@ fixrel:
 	add	r1, r1, r9
 fixnext:
 	str	r1, [r0]
-	add	r2, r2, #8	/* each rel.dyn entry is 8 bytes */
+	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
 	cmp	r2, r3
-	ble	fixloop
+	blo	fixloop
 #endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -296,8 +292,8 @@ _nand_boot_ofs
 jump_2_ram:
 	ldr	r0, _board_init_r_ofs
 	adr	r1, _start
-	add	r0, r0, r1
-	add	lr, r0, r9
+	add	lr, r0, r1
+	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
 	mov	r1, r7		/* dest_addr */
@@ -315,112 +311,6 @@ _rel_dyn_end_ofs:
 _dynsym_start_ofs:
 	.word __dynsym_start - _start
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-#ifdef CONFIG_OMAP2420H4
-       /* Copy vectors to mask ROM indirect addr */
-	adr	r0, _start		/* r0 <- current position of code   */
-		add     r0, r0, #4				/* skip reset vector			*/
-	mov	r2, #64			/* r2 <- size to copy  */
-	add	r2, r0, r2		/* r2 <- source end address	    */
-	mov	r1, #SRAM_OFFSET0	  /* build vect addr */
-	mov	r3, #SRAM_OFFSET1
-	add	r1, r1, r3
-	mov	r3, #SRAM_OFFSET2
-	add	r1, r1, r3
-next:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	bne	next			/* loop until equal */
-	bl	cpy_clk_code		/* put dpll adjust code behind vectors */
-#endif
-	/* the mask ROM code should have PLL and others stable */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl  cpu_init_crit
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp	r0, r1			/* don't reloc during debug	    */
-#ifndef CONFIG_PRELOADER
-	beq	stack_setup
-#endif	/* CONFIG_PRELOADER */
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot	    */
-	add	r2, r0, r2		/* r2 <- source end address	    */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-#ifdef CONFIG_PRELOADER
-	sub	sp, r0, #128		/* leave 32 words for abort-stack   */
-#else
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area			    */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo			    */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-#endif	/* CONFIG_PRELOADER */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	adr	r2, _start
-	ldr	r0, _bss_start_ofs	/* find start of bss segment        */
-	add	r0, r0, r2
-	ldr	r1, _bss_end_ofs	/* stop here                        */
-	add	r1, r1, r2
-	mov	r2, #0x00000000		/* clear			    */
-
-#ifndef CONFIG_PRELOADER
-clbss_l:str	r2, [r0]		/* clear loop...		    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
-#endif
-
-	ldr	r0, _start_armboot_ofs
-	adr	r1, _start
-	add	r0, r0, r1
-	ldr	pc, r0
-
-_start_armboot_ofs:
-#ifdef CONFIG_NAND_SPL
-	.word nand_boot - _start
-#else
-#ifdef CONFIG_ONENAND_IPL
-	.word start_oneboot - _start
-#else
-	.word start_armboot - _start
-#endif /* CONFIG_ONENAND_IPL */
-#endif /* CONFIG_NAND_SPL */
-
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*
  *************************************************************************
  *
@@ -505,13 +395,7 @@ cpu_init_crit:
 	sub	sp, sp, #S_FRAME_SIZE		@ carve out a frame on current user stack
 	stmia	sp, {r0 - r12}			@ Save user registers (now in svc mode) r0-r12
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, IRQ_STACK_START_IN		@ set base 2 words into abort stack
-#else
-	adr	r2, _start
-	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
-#endif
 	ldmia	r2, {r2 - r3}			@ get values for "aborted" pc and cpsr (into parm regs)
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
 
@@ -542,13 +426,7 @@ cpu_init_crit:
 	.endm
 
 	.macro get_bad_stack
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack (enter in banked mode)
-#else
-	adr	r13, _start			@ setup our mode stack (enter in banked mode)
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
-#endif
 
 	str	lr, [r13]			@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr			@ get the spsr
@@ -564,13 +442,7 @@ cpu_init_crit:
 	.macro get_bad_stack_swi
 	sub	r13, r13, #4			@ space on current stack for scratch reg.
 	str	r0, [r13]			@ save R0's value.
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r0, IRQ_STACK_START_IN		@ get data regions start
-#else
-	ldr	r0, _armboot_start		@ get data regions start
-	sub	r0, r0, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
-	sub	r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ move past gbl and a couple spots for abort stack
-#endif
 	str	lr, [r0]			@ save caller lr in position 0 of saved stack
 	mrs	r0, spsr			@ get the spsr
 	str	lr, [r0, #4]			@ save spsr in position 1 of saved stack
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index 24e5bf4..f04d268 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -30,6 +30,7 @@
  * Base codes by scsuh (sc.suh)
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 #ifdef CONFIG_ENABLE_MMU
@@ -107,52 +108,53 @@ _TEXT_BASE:
 _TEXT_PHY_BASE:
 	.word	CONFIG_SYS_PHY_UBOOT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
  */
-.globl _bss_start
-_bss_start:
-	.word __bss_start
 
-.globl _bss_end
-_bss_end:
-	.word _end
+.globl _bss_start_ofs
+_bss_start_ofs:
+	.word __bss_start - _start
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
-	.word	0x0badc0de
+.globl _bss_end_ofs
+_bss_end_ofs:
+	.word _end - _start
 
-.globl _datarel_start
-_datarel_start:
-	.word __datarel_start
+.globl _datarel_start_ofs
+_datarel_start_ofs:
+	.word __datarel_start - _start
 
-.globl _datarelrolocal_start
-_datarelrolocal_start:
-	.word __datarelrolocal_start
+.globl _datarelrolocal_start_ofs
+_datarelrolocal_start_ofs:
+	.word __datarelrolocal_start - _start
 
-.globl _datarellocal_start
-_datarellocal_start:
-	.word __datarellocal_start
+.globl _datarellocal_start_ofs
+_datarellocal_start_ofs:
+	.word __datarellocal_start - _start
 
-.globl _datarelro_start
-_datarelro_start:
-	.word __datarelro_start
+.globl _datarelro_start_ofs
+_datarelro_start_ofs:
+	.word __datarelro_start - _start
 
-.globl _got_start
-_got_start:
-	.word __got_start
+.globl _rel_dyn_start_ofs
+_rel_dyn_start_ofs:
+	.word __rel_dyn_start - _start
 
-.globl _got_end
-_got_end:
-	.word __got_end
+.globl _rel_dyn_end_ofs
+_rel_dyn_end_ofs:
+	.word __rel_dyn_end - _start
+
+.globl _dynsym_start_ofs
+_dynsym_start_ofs:
+	.word __dynsym_start - _start
+
+/* IRQ stack memory (calculated at run-time) + 8 bytes */
+.globl IRQ_STACK_START_IN
+IRQ_STACK_START_IN:
+	.word	0x0badc0de
 
 /*
  * the actual reset code
@@ -274,13 +276,11 @@ stack_setup:
 
 	adr	r0, _start
 	ldr	r2, _TEXT_BASE
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot	    */
-	add	r2, r0, r2		/* r2 <- source end address	    */
+	ldr	r3, _bss_start_ofs
+	add	r2, r0, r3		/* r2 <- source end address	    */
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -288,26 +288,45 @@ copy_loop:
 	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
-	/* fix got entries */
-	ldr	r1, _TEXT_BASE		/* Text base */
-	mov	r0, r7			/* reloc addr */
-	ldr	r2, _got_start		/* addr in Flash */
-	ldr	r3, _got_end		/* addr in Flash */
-	sub	r3, r3, r1
-	add	r3, r3, r0
-	sub	r2, r2, r1
-	add	r2, r2, r0
-
+	/*
+	 * fix .rel.dyn relocations
+	 */
+	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
+	sub	r9, r7, r0		/* r9 <- relocation offset */
+	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
+	add	r10, r10, r0		/* r10 <- sym table in FLASH */
+	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
+	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
+	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
+	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
 fixloop:
-	ldr	r4, [r2]
-	sub	r4, r4, r1
-	add	r4, r4, r0
-	str	r4, [r2]
-	add	r2, r2, #4
+	ldr	r0, [r2]	/* r0 <- location to fix up, IN FLASH! */
+	add	r0, r0, r9	/* r0 <- location to fix up in RAM */
+	ldr	r1, [r2, #4]
+	and	r8, r1, #0xff
+	cmp	r8, #23		/* relative fixup? */
+	beq	fixrel
+	cmp	r8, #2		/* absolute fixup? */
+	beq	fixabs
+	/* ignore unknown type of fixup */
+	b	fixnext
+fixabs:
+	/* absolute fix: set location to (offset) symbol value */
+	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
+	add	r1, r10, r1		/* r1 <- address of symbol in table */
+	ldr	r1, [r1, #4]		/* r1 <- symbol value */
+	add	r1, r1, r9		/* r1 <- relocated sym addr */
+	b	fixnext
+fixrel:
+	/* relative fix: increase location by offset */
+	ldr	r1, [r0]
+	add	r1, r1, r9
+fixnext:
+	str	r1, [r0]
+	add	r2, r2, #8	/* each rel.dyn entry is 8 bytes */
 	cmp	r2, r3
-	bne	fixloop
+	blo	fixloop
 #endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 #ifdef CONFIG_ENABLE_MMU
 enable_mmu:
@@ -349,13 +368,11 @@ skip_hw_init:
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
-	ldr	r0, _bss_start
-	ldr	r1, _bss_end
+	ldr	r0, _bss_start_ofs
+	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
 	mov	r4, r7			/* reloc addr */
-	sub	r0, r0, r3
 	add	r0, r0, r4
-	sub	r1, r1, r3
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
@@ -377,202 +394,20 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 
 _nand_boot: .word nand_boot
 #else
-	ldr	r0, _TEXT_BASE
-	ldr	r2, _board_init_r
-	sub	r2, r2, r0
-	add	r2, r2, r7	/* position from board_init_r in RAM */
+	ldr	r0, _board_init_r_ofs
+	adr	r1, _start
+	add	lr, r0, r1
+	add     lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
 	mov	r1, r7		/* dest_addr */
 	/* jump to it ... */
-	mov	lr, r2
 	mov	pc, lr
 
-_board_init_r: .word board_init_r
-#endif
-
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0, cpsr
-	bic	r0, r0, #0x3f
-	orr	r0, r0, #0xd3
-	msr	cpsr, r0
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-cpu_init_crit:
-	/*
-	 * When booting from NAND - it has definitely been a reset, so, no need
-	 * to flush caches and disable the MMU
-	 */
-#ifndef CONFIG_NAND_SPL
-	/*
-	 * flush v4 I/D caches
-	 */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-
-	/* Prepare to disable the MMU */
-	adr	r2, mmu_disable_phys
-	sub	r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE)
-	b	mmu_disable
-
-	.align 5
-	/* Run in a single cache-line */
-mmu_disable:
-	mcr	p15, 0, r0, c1, c0, 0
-	nop
-	nop
-	mov	pc, r2
-mmu_disable_phys:
-
-#ifdef CONFIG_DISABLE_TCM
-	/*
-	 * Disable the TCMs
-	 */
-	mrc	p15, 0, r0, c0, c0, 2	/* Return TCM details */
-	cmp	r0, #0
-	beq	skip_tcmdisable
-	mov	r1, #0
-	mov	r2, #1
-	tst	r0, r2
-	mcrne	p15, 0, r1, c9, c1, 1	/* Disable Instruction TCM if present*/
-	tst	r0, r2, LSL #16
-	mcrne	p15, 0, r1, c9, c1, 0	/* Disable Data TCM if present*/
-skip_tcmdisable:
-#endif
-#endif
-
-#ifdef CONFIG_PERIPORT_REMAP
-	/* Peri port setup */
-	ldr	r0, =CONFIG_PERIPORT_BASE
-	orr	r0, r0, #CONFIG_PERIPORT_SIZE
-	mcr	p15,0,r0,c15,c2,4
-#endif
-
-	/*
-	 * Go setup Memory and board specific bits prior to relocation.
-	 */
-	bl	lowlevel_init		/* go setup pll,mux,memory */
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-#ifdef CONFIG_ENABLE_MMU
-enable_mmu:
-	/* enable domain access */
-	ldr	r5, =0x0000ffff
-	mcr	p15, 0, r5, c3, c0, 0	/* load domain access register */
-
-	/* Set the TTB register */
-	ldr	r0, _mmu_table_base
-	ldr	r1, =CONFIG_SYS_PHY_UBOOT_BASE
-	ldr	r2, =0xfff00000
-	bic	r0, r0, r2
-	orr	r1, r0, r1
-	mcr	p15, 0, r1, c2, c0, 0
-
-	/* Enable the MMU */
-	mrc	p15, 0, r0, c1, c0, 0
-	orr	r0, r0, #1		/* Set CR_M to enable MMU */
-
-	/* Prepare to enable the MMU */
-	adr	r1, skip_hw_init
-	and	r1, r1, #0x3fc
-	ldr	r2, _TEXT_BASE
-	ldr	r3, =0xfff00000
-	and	r2, r2, r3
-	orr	r2, r2, r1
-	b	mmu_enable
-
-	.align 5
-	/* Run in a single cache-line */
-mmu_enable:
-
-	mcr	p15, 0, r0, c1, c0, 0
-	nop
-	nop
-	mov	pc, r2
-skip_hw_init:
+_board_init_r_ofs:
+	.word board_init_r - _start
 #endif
 
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, =CONFIG_SYS_UBOOT_BASE	/* base of copy in DRAM	    */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment        */
-	ldr	r1, _bss_end		/* stop here                        */
-	mov 	r2, #0			/* clear                            */
-
-clbss_l:
-	str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	blo	clbss_l
-
-#ifndef CONFIG_NAND_SPL
-	ldr	pc, _start_armboot
-
-_start_armboot:
-	.word start_armboot
-#else
-	b	nand_boot
-/*	.word nand_boot*/
-#endif
-
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 #ifdef CONFIG_ENABLE_MMU
 _mmu_table_base:
 	.word mmu_table
@@ -659,14 +494,7 @@ phy_last_jump:
 	/* Save user registers (now in svc mode) r0-r12 */
 	stmia	sp, {r0 - r12}
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
-	/* set base 2 words into abort stack */
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	/* get values for "aborted" pc and cpsr (into parm regs) */
 	ldmia	r2, {r2 - r3}
 	/* grab pointer to old stack */
@@ -681,16 +509,7 @@ phy_last_jump:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	/* setup our mode stack (enter in banked mode) */
-	ldr	r13, _armboot_start
-	/* move past malloc pool */
-	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)
-	/* move to reserved a couple spots for abort stack */
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8)
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 
 	/* save caller lr in position 0 of saved stack */
 	str	lr, [r13]
@@ -715,16 +534,7 @@ phy_last_jump:
 	sub	r13, r13, #4
 	/* save R0's value. */
 	str	r0, [r13]
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	/* get data regions start */
-	ldr	r0, _armboot_start
-	/* move past malloc pool */
-	sub	r0, r0, #(CONFIG_SYS_MALLOC_LEN)
-	/* move past gbl and a couple spots for abort stack */
-	sub	r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8)
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 	/* save caller lr in position 0 of saved stack */
 	str	lr, [r0]
 	/* get the spsr */
diff --git a/arch/arm/cpu/arm1176/u-boot.lds b/arch/arm/cpu/arm1176/u-boot.lds
index fa640ee..d9ed954 100644
--- a/arch/arm/cpu/arm1176/u-boot.lds
+++ b/arch/arm/cpu/arm1176/u-boot.lds
@@ -51,11 +51,14 @@ SECTIONS
 		*(.data.rel.ro)
 	}
 
-	__got_start = .;
 	. = ALIGN(4);
-	.got : { *(.got) }
+	__rel_dyn_start = .;
+	.rel.dyn : { *(.rel.dyn) }
+	__rel_dyn_end = .;
+
+	__dynsym_start = .;
+	.dynsym : { *(.dynsym) }
 
-	__got_end = .;
 	. = .;
 	__u_boot_cmd_start = .;
 	.u_boot_cmd : { *(.u_boot_cmd) }
@@ -65,4 +68,10 @@ SECTIONS
 	__bss_start = .;
 	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
+
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
 }
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index d93911f..8cd267b 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -23,7 +23,7 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 #include <asm/hardware.h>
@@ -79,12 +79,6 @@ _fiq:			.word fiq
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
  */
@@ -108,7 +102,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -197,7 +190,6 @@ stack_setup:
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -222,9 +214,8 @@ fixloop:
 	str	r4, [r2]
 	add	r2, r2, #4
 	cmp	r2, r3
-	bne	fixloop
+	blo	fixloop
 #endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -264,92 +255,6 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 
 _board_init_r: .word board_init_r
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0x13
-	msr	cpsr,r0
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-#ifdef CONFIG_LPC2292
-	bl	lowlevel_init
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp	r0, r1			/* don't reloc during debug	    */
-	beq	stack_setup
-
-#if CONFIG_SYS_TEXT_BASE
-#ifndef CONFIG_LPC2292 /* already done in lowlevel_init */
-	ldr	r2, =0x0		/* Relocate the exception vectors   */
-	cmp	r1, r2			/* and associated data to address   */
-	ldmneia r0!, {r3-r10}		/* 0x0. Do nothing if CONFIG_SYS_TEXT_BASE is  */
-	stmneia r2!, {r3-r10}		/* 0x0. Copy the first 15 words.    */
-	ldmneia r0, {r3-r9}
-	stmneia r2, {r3-r9}
-	adrne	r0, _start		/* restore r0			    */
-#endif	/* !CONFIG_LPC2292 */
-#endif
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot	    */
-	add	r2, r0, r2		/* r2 <- source end address	    */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area			    */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo			    */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment	    */
-	ldr	r1, _bss_end		/* stop here			    */
-	mov	r2, #0x00000000		/* clear			    */
-
-clbss_l:str	r2, [r0]		/* clear loop...		    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	blo	clbss_l
-
-	ldr	pc, _start_armboot
-
-_start_armboot: .word start_armboot
-
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*
  *************************************************************************
  *
@@ -606,13 +511,7 @@ lock_loop:
 	stmia	sp, {r0 - r12}			@ Calling r0-r12
 	add	r8, sp, #S_PC
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	ldmia	r2, {r2 - r4}			@ get pc, cpsr, old_r0
 	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
 
@@ -643,13 +542,7 @@ lock_loop:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 343a760..d4edde7 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -24,6 +24,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <common.h>
 #include <config.h>
 
@@ -74,12 +75,6 @@ _fiq:			.word fiq
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
  */
@@ -103,7 +98,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -242,7 +236,6 @@ stack_setup:
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -267,9 +260,8 @@ fixloop:
 	str	r4, [r2]
 	add	r2, r2, #4
 	cmp	r2, r3
-	bne	fixloop
+	blo	fixloop
 #endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -315,127 +307,6 @@ _nand_boot: .word nand_boot
 _board_init_r: .word board_init_r
 #endif
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-/*
- * the actual start code
- */
-
-start_code:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0, cpsr
-	bic	r0, r0, #0x1f
-	orr	r0, r0, #0xd3
-	msr	cpsr, r0
-
-	bl	coloured_LED_init
-	bl	red_LED_on
-
-#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK)
-	/*
-	 * relocate exception table
-	 */
-	ldr	r0, =_start
-	ldr	r1, =0x0
-	mov	r2, #16
-copyex:
-	subs	r2, r2, #1
-	ldr	r3, [r0], #4
-	str	r3, [r1], #4
-	bne	copyex
-#endif
-
-#ifdef CONFIG_S3C24X0
-	/* turn off the watchdog */
-
-# if defined(CONFIG_S3C2400)
-#  define pWTCON	0x15300000
-#  define INTMSK	0x14400008	/* Interupt-Controller base addresses */
-#  define CLKDIVN	0x14800014	/* clock divisor register */
-#else
-#  define pWTCON	0x53000000
-#  define INTMSK	0x4A000008	/* Interupt-Controller base addresses */
-#  define INTSUBMSK	0x4A00001C
-#  define CLKDIVN	0x4C000014	/* clock divisor register */
-# endif
-
-	ldr	r0, =pWTCON
-	mov	r1, #0x0
-	str	r1, [r0]
-
-	/*
-	 * mask all IRQs by setting all bits in the INTMR - default
-	 */
-	mov	r1, #0xffffffff
-	ldr	r0, =INTMSK
-	str	r1, [r0]
-# if defined(CONFIG_S3C2410)
-	ldr	r1, =0x3ff
-	ldr	r0, =INTSUBMSK
-	str	r1, [r0]
-# endif
-
-	/* FCLK:HCLK:PCLK = 1:2:4 */
-	/* default FCLK is 120 MHz ! */
-	ldr	r0, =CLKDIVN
-	mov	r1, #3
-	str	r1, [r0]
-#endif	/* CONFIG_S3C24X0 */
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp	r0, r1			/* don't reloc during debug         */
-	beq	stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area              */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                 */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment        */
-	ldr	r1, _bss_end		/* stop here                        */
-	mov	r2, #0x00000000		/* clear                            */
-
-clbss_l:str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	blo	clbss_l
-
-	ldr	pc, _start_armboot
-
-_start_armboot:	.word start_armboot
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*
  *************************************************************************
  *
@@ -524,15 +395,7 @@ cpu_init_crit:
 	.macro	bad_save_user_regs
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0-r12
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE)
-	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
-	/* set base 2 words into abort stack */
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	ldmia	r2, {r2 - r3}			@ get pc, cpsr
 	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
 
@@ -564,15 +427,7 @@ cpu_init_crit:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE)
-	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)
-	/* reserve a couple spots in abort stack */
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8)
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index cf18a01..51229c6 100644
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -30,7 +30,7 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
@@ -85,12 +85,6 @@ _fiq:			.word fiq
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
  */
@@ -114,7 +108,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -234,7 +227,6 @@ stack_setup:
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -259,9 +251,8 @@ fixloop:
 	str	r4, [r2]
 	add	r2, r2, #4
 	cmp	r2, r3
-	bne	fixloop
+	blo	fixloop
 #endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -305,108 +296,6 @@ _nand_boot: .word nand_boot
 _board_init_r: .word board_init_r
 #endif
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-	/*
-	 * Set up 925T mode
-	 */
-	mov r1, #0x81               /* Set ARM925T configuration. */
-	mcr p15, 0, r1, c15, c1, 0  /* Write ARM925T configuration register. */
-
-	/*
-	 * turn off the watchdog, unlock/diable sequence
-	 */
-	mov  r1, #0xF5
-	ldr  r0, =WDTIM_MODE
-	strh r1, [r0]
-	mov  r1, #0xA0
-	strh r1, [r0]
-
-	/*
-	 * mask all IRQs by setting all bits in the INTMR - default
-	 */
-	mov r1, #0xffffffff
-	ldr r0, =REG_IHL1_MIR
-	str r1, [r0]
-	ldr r0, =REG_IHL2_MIR
-	str r1, [r0]
-
-	/*
-	 * wait for dpll to lock
-	 */
-	ldr  r0, =CK_DPLL1
-	mov  r1, #0x10
-	strh r1, [r0]
-poll1:
-	ldrh r1, [r0]
-	ands r1, r1, #0x01
-	beq poll1
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl  cpu_init_crit
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment        */
-	ldr	r1, _bss_end		/* stop here                        */
-	mov	r2, #0x00000000		/* clear                            */
-
-clbss_l:str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	blo	clbss_l
-
-	ldr	pc, _start_armboot
-
-_start_armboot:	.word start_armboot
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*
  *************************************************************************
  *
@@ -489,13 +378,7 @@ cpu_init_crit:
 	sub	sp, sp, #S_FRAME_SIZE           @ carve out a frame on current user stack
 	stmia	sp, {r0 - r12}			@ Save user registers (now in svc mode) r0-r12
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	ldmia	r2, {r2 - r3}                   @ get values for "aborted" pc and cpsr (into parm regs)
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
 
@@ -526,13 +409,7 @@ cpu_init_crit:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-#else
 	ldr	r13, IRQ_STACK_START_IN
-#endif
 
 	str	lr, [r13]			@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr                        @ get the spsr
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/dram.c b/arch/arm/cpu/arm926ejs/kirkwood/dram.c
index 7439c87..2441554 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/dram.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/dram.c
@@ -81,6 +81,16 @@ int dram_init(void)
 		gd->ram_size += gd->bd->bi_dram[i].size;
 
 	}
+
+	for (; i < CONFIG_NR_DRAM_BANKS; i++) {
+		/* If above loop terminated prematurely, we need to set
+		 * remaining banks' start address & size as 0. Otherwise other
+		 * u-boot functions and Linux kernel gets wrong values which
+		 * could result in crash */
+		gd->bd->bi_dram[i].start = 0;
+		gd->bd->bi_dram[i].size = 0;
+	}
+
 	return 0;
 }
 
@@ -93,4 +103,3 @@ void dram_init_banksize(void)
 	dram_init();
 }
 #endif /* CONFIG_SYS_BOARD_DRAM_INIT */
-
diff --git a/arch/arm/cpu/arm926ejs/mx25/reset.c b/arch/arm/cpu/arm926ejs/mx25/reset.c
index 1e33150..1a43683 100644
--- a/arch/arm/cpu/arm926ejs/mx25/reset.c
+++ b/arch/arm/cpu/arm926ejs/mx25/reset.c
@@ -43,14 +43,14 @@ void reset_cpu (ulong ignored)
 {
 	struct wdog_regs *regs = (struct wdog_regs *)IMX_WDT_BASE;
 	/* Disable watchdog and set Time-Out field to 0 */
-	writel (0x00000000, &regs->wcr);
+	writew(0, &regs->wcr);
 
 	/* Write Service Sequence */
-	writel (0x00005555, &regs->wsr);
-	writel (0x0000AAAA, &regs->wsr);
+	writew(WSR_UNLOCK1, &regs->wsr);
+	writew(WSR_UNLOCK2, &regs->wsr);
 
 	/* Enable watchdog */
-	writel (WCR_WDE, &regs->wcr);
+	writew(WCR_WDE, &regs->wcr);
 
 	while (1) ;
 }
diff --git a/arch/arm/cpu/arm926ejs/orion5x/dram.c b/arch/arm/cpu/arm926ejs/orion5x/dram.c
index c5c8ab7..b749282 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/dram.c
+++ b/arch/arm/cpu/arm926ejs/orion5x/dram.c
@@ -49,20 +49,6 @@ u32 orion5x_sdram_bar(enum memory_bank bank)
 	result = winregs[bank].base;
 	return result;
 }
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-int dram_init(void)
-{
-	int i;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		gd->bd->bi_dram[i].start = orion5x_sdram_bar(i);
-		gd->bd->bi_dram[i].size = get_ram_size(
-			(volatile long *) (gd->bd->bi_dram[i].start),
-			CONFIG_MAX_RAM_BANK_SIZE);
-	}
-	return 0;
-}
-#else
 int dram_init (void)
 {
 	/* dram_init must store complete ramsize in gd->ram_size */
@@ -83,4 +69,3 @@ void dram_init_banksize (void)
 			CONFIG_MAX_RAM_BANK_SIZE);
 	}
 }
-#endif
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 863de3b..6dcc9b4 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -31,7 +31,7 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <common.h>
 #include <version.h>
@@ -145,7 +145,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -205,7 +204,6 @@ stack_setup:
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -225,13 +223,13 @@ copy_loop:
 	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
 	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
 fixloop:
-	ldr	r0, [r2]	/* r0 <- location to fix up, IN FLASH! */
-	add	r0, r9		/* r0 <- location to fix up in RAM */
+	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
+	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
 	ldr	r1, [r2, #4]
 	and	r8, r1, #0xff
-	cmp	r8, #23		/* relative fixup? */
+	cmp	r8, #23			/* relative fixup? */
 	beq	fixrel
-	cmp	r8, #2		/* absolute fixup? */
+	cmp	r8, #2			/* absolute fixup? */
 	beq	fixabs
 	/* ignore unknown type of fixup */
 	b	fixnext
@@ -248,11 +246,10 @@ fixrel:
 	add	r1, r1, r9
 fixnext:
 	str	r1, [r0]
-	add	r2, r2, #8	/* each rel.dyn entry is 8 bytes */
+	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
 	cmp	r2, r3
 	blo	fixloop
 #endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -286,8 +283,8 @@ _nand_boot_ofs:
 #else
 	ldr	r0, _board_init_r_ofs
 	adr	r1, _start
-	add	r0, r0, r1
-	add	lr, r0, r9
+	add	lr, r0, r1
+	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
 	mov	r1, r7		/* dest_addr */
@@ -305,89 +302,6 @@ _rel_dyn_end_ofs:
 _dynsym_start_ofs:
 	.word __dynsym_start - _start
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
-	ldr	r3, _bss_start_ofs	/* r3 <- _bss_start - _start	    */
-	add	r2, r0, r3		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	sp, r0, #128		/* leave 32 words for abort-stack   */
-#ifndef CONFIG_PRELOADER
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-#endif /* CONFIG_PRELOADER */
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	adr	r2, _start
-	ldr	r0, _bss_start_ofs	/* find start of bss segment        */
-	add	r0, r0, r2
-	ldr	r1, _bss_end_ofs	/* stop here                        */
-	add	r1, r1, r2
-	mov	r2, #0x00000000		/* clear                            */
-
-#ifndef CONFIG_PRELOADER
-clbss_l:str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	blo	clbss_l
-
-	bl coloured_LED_init
-	bl red_LED_on
-#endif /* CONFIG_PRELOADER */
-
-	ldr	r0, _start_armboot_ofs
-	adr	r1, _start
-	add	r0, r0, r1
-	ldr	pc, r0
-
-_start_armboot_ofs:
-#ifdef CONFIG_NAND_SPL
-	.word nand_boot - _start
-#else
-	.word start_armboot - _start
-#endif /* CONFIG_NAND_SPL */
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*
  *************************************************************************
  *
@@ -472,13 +386,7 @@ cpu_init_crit:
 	@ carve out a frame on current user stack
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	adr	r2, _start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	@ get values for "aborted" pc and cpsr (into parm regs)
 	ldmia	r2, {r2 - r3}
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
@@ -510,13 +418,7 @@ cpu_init_crit:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	adr	r13, _start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 
 	str	lr, [r13]	@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr	@ get the spsr
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 077886f..cad43ba 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -30,7 +30,7 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
@@ -89,12 +89,6 @@ _fiq:
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
  */
@@ -118,7 +112,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -203,7 +196,6 @@ stack_setup:
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -228,9 +220,8 @@ fixloop:
 	str	r4, [r2]
 	add	r2, r2, #4
 	cmp	r2, r3
-	bne	fixloop
+	blo	fixloop
 #endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -273,72 +264,6 @@ _nand_boot: .word nand_boot
 _board_init_r: .word board_init_r
 #endif
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment        */
-	ldr	r1, _bss_end		/* stop here                        */
-	mov	r2, #0x00000000		/* clear                            */
-
-clbss_l:str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
-
-	ldr	pc, _start_armboot
-
-_start_armboot:
-	.word start_armboot
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*
  *************************************************************************
  *
@@ -424,13 +349,7 @@ cpu_init_crit:
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	@ get values for "aborted" pc and cpsr (into parm regs)
 	ldmia	r2, {r2 - r3}
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
@@ -462,13 +381,7 @@ cpu_init_crit:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 
 	str	lr, [r13]	@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr	@ get the spsr
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 07356cb..957ca34 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -30,7 +30,7 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
@@ -87,12 +87,6 @@ _fiq:
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE /* address of _start in the linked image */
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
  */
@@ -116,7 +110,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -201,7 +194,6 @@ stack_setup:
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -226,9 +218,8 @@ fixloop:
 	str	r4, [r2]
 	add	r2, r2, #4
 	cmp	r2, r3
-	bne	fixloop
+	blo	fixloop
 #endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -268,74 +259,6 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 
 _board_init_r: .word board_init_r
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
-/*
- * the actual reset code
- */
-.globl reset
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* pc relative  address of label    */
-	ldr	r1, _TEXT_BASE		/* linked image address of label    */
-	cmp	r0, r1                  /* test if we run from flash or RAM */
-	beq	stack_setup             /* ifeq we are in the RAM copy      */
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment        */
-	ldr	r1, _bss_end		/* stop here                        */
-	mov	r2, #0x00000000		/* clear                            */
-
-clbss_l:str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	blo	clbss_l
-
-	ldr	pc, _start_armboot
-
-_start_armboot:
-	.word start_armboot
-
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*
  *************************************************************************
  *
@@ -400,13 +323,7 @@ cpu_init_crit:
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	@ get values for "aborted" pc and cpsr (into parm regs)
 	ldmia	r2, {r2 - r3}
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
@@ -438,13 +355,7 @@ cpu_init_crit:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 
 	str	lr, [r13]	@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr	@ get the spsr
diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
index 00f649c..0b04a88 100644
--- a/arch/arm/cpu/armv7/mx5/clock.c
+++ b/arch/arm/cpu/armv7/mx5/clock.c
@@ -269,7 +269,7 @@ u32 imx_get_fecclk(void)
 /*
  * Dump some core clockes.
  */
-int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	u32 freq;
 
diff --git a/arch/arm/cpu/armv7/mx5/u-boot.lds b/arch/arm/cpu/armv7/mx5/u-boot.lds
deleted file mode 100644
index 55d6599..0000000
--- a/arch/arm/cpu/armv7/mx5/u-boot.lds
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * January 2004 - Changed to support H4 device
- * Copyright (c) 2004 Texas Instruments
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text	   :
-	{
-	  arch/arm/cpu/armv7/start.o
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : {
-		*(.data)
-	__datarel_start = .;
-		*(.data.rel)
-	__datarelrolocal_start = .;
-		*(.data.rel.ro.local)
-	__datarellocal_start = .;
-		*(.data.rel.local)
-	__datarelro_start = .;
-		*(.data.rel.ro)
-	}
-
-	__got_start = .;
-	. = ALIGN(4);
-	.got : { *(.got) }
-	__got_end = .;
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c
index da2cd90..0870857 100644
--- a/arch/arm/cpu/armv7/omap3/emif4.c
+++ b/arch/arm/cpu/armv7/omap3/emif4.c
@@ -136,29 +136,6 @@ void do_emif4_init(void)
  * dram_init -
  *  - Sets uboots idea of sdram size
  */
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-int dram_init(void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-	unsigned int size0 = 0, size1 = 0;
-
-	size0 = get_sdr_cs_size(CS0);
-	/*
-	 * If a second bank of DDR is attached to CS1 this is
-	 * where it can be started.  Early init code will init
-	 * memory on CS0.
-	 */
-	if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED))
-		size1 = get_sdr_cs_size(CS1);
-
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = size0;
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
-	gd->bd->bi_dram[1].size = size1;
-
-	return 0;
-}
-#else
 int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -190,7 +167,6 @@ void dram_init_banksize (void)
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
 	gd->bd->bi_dram[1].size = size1;
 }
-#endif
 
 /*
  * mem_init() -
diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c
index 6c419f5..a4979ce 100644
--- a/arch/arm/cpu/armv7/omap3/sdrc.c
+++ b/arch/arm/cpu/armv7/omap3/sdrc.c
@@ -149,6 +149,13 @@ void do_sdrc_init(u32 cs, u32 early)
 			&sdrc_actim_base1->ctrla);
 		writel(readl(&sdrc_actim_base0->ctrlb),
 			&sdrc_actim_base1->ctrlb);
+
+		writel(CMD_NOP, &sdrc_base->cs[cs].manual);
+		writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
+		writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+		writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+		writel(readl(&sdrc_base->cs[CS0].mr),
+			&sdrc_base->cs[CS1].mr);
 	}
 
 	/*
@@ -163,33 +170,6 @@ void do_sdrc_init(u32 cs, u32 early)
  * dram_init -
  *  - Sets uboots idea of sdram size
  */
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-int dram_init(void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-	unsigned int size0 = 0, size1 = 0;
-
-	size0 = get_sdr_cs_size(CS0);
-	/*
-	 * If a second bank of DDR is attached to CS1 this is
-	 * where it can be started.  Early init code will init
-	 * memory on CS0.
-	 */
-	if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) {
-		do_sdrc_init(CS1, NOT_EARLY);
-		make_cs1_contiguous();
-
-		size1 = get_sdr_cs_size(CS1);
-	}
-
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = size0;
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
-	gd->bd->bi_dram[1].size = size1;
-
-	return 0;
-}
-#else
 int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -225,7 +205,6 @@ void dram_init_banksize (void)
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
 	gd->bd->bi_dram[1].size = size1;
 }
-#endif
 
 /*
  * mem_init -
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 24a66f5..e7651d2 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -102,12 +102,7 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	gd->bd->bi_dram[0].start = 0x80000000;
-	gd->bd->bi_dram[0].size = sdram_size();
-#else
 	gd->ram_size = sdram_size();
-#endif
 
 	return 0;
 }
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 64c86e9..bb3948d 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -29,6 +29,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
@@ -69,12 +70,6 @@ _end_vect:
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
  */
@@ -98,7 +93,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -195,7 +189,6 @@ relocate_code:
 stack_setup:
 	mov	sp, r4
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 	adr	r0, _start
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
@@ -224,13 +217,13 @@ copy_loop:
 	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
 	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
 fixloop:
-	ldr	r0, [r2]	/* r0 <- location to fix up, IN FLASH! */
-	add	r0, r9		/* r0 <- location to fix up in RAM */
+	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
+	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
 	ldr	r1, [r2, #4]
 	and	r8, r1, #0xff
-	cmp	r8, #23		/* relative fixup? */
+	cmp	r8, #23			/* relative fixup? */
 	beq	fixrel
-	cmp	r8, #2		/* absolute fixup? */
+	cmp	r8, #2			/* absolute fixup? */
 	beq	fixabs
 	/* ignore unknown type of fixup */
 	b	fixnext
@@ -247,7 +240,7 @@ fixrel:
 	add	r1, r1, r9
 fixnext:
 	str	r1, [r0]
-	add	r2, r2, #8	/* each rel.dyn entry is 8 bytes */
+	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
 	cmp	r2, r3
 	blo	fixloop
 
@@ -265,7 +258,6 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 	cmp	r0, r1
 	bne	clbss_l
 #endif	/* #ifndef CONFIG_PRELOADER */
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 /*
  * We are done. Do not return, instead branch to second part of board
@@ -274,8 +266,8 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 jump_2_ram:
 	ldr	r0, _board_init_r_ofs
 	adr	r1, _start
-	add	r0, r0, r1
-	add	lr, r0, r9
+	add	lr, r0, r1
+	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
 	mov	r1, r7		/* dest_addr */
@@ -292,94 +284,6 @@ _rel_dyn_end_ofs:
 _dynsym_start_ofs:
 	.word __dynsym_start - _start
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0, cpsr
-	bic	r0, r0, #0x1f
-	orr	r0, r0, #0xd3
-	msr	cpsr,r0
-
-#if (CONFIG_OMAP34XX)
-	/* Copy vectors to mask ROM indirect addr */
-	adr	r0, _start		@ r0 <- current position of code
-	add	r0, r0, #4		@ skip reset vector
-	mov	r2, #64			@ r2 <- size to copy
-	add	r2, r0, r2		@ r2 <- source end address
-	mov	r1, #SRAM_OFFSET0	@ build vect addr
-	mov	r3, #SRAM_OFFSET1
-	add	r1, r1, r3
-	mov	r3, #SRAM_OFFSET2
-	add	r1, r1, r3
-next:
-	ldmia	r0!, {r3 - r10}		@ copy from source address [r0]
-	stmia	r1!, {r3 - r10}		@ copy to   target address [r1]
-	cmp	r0, r2			@ until source end address [r2]
-	bne	next			@ loop until equal */
-#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT)
-	/* No need to copy/exec the clock code - DPLL adjust already done
-	 * in NAND/oneNAND Boot.
-	 */
-	bl	cpy_clk_code		@ put dpll adjust code behind vectors
-#endif /* NAND Boot */
-#endif
-	/* the mask ROM code should have PLL and others stable */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				@ relocate U-Boot to RAM
-	adr	r0, _start		@ r0 <- current position of code
-	ldr	r1, _TEXT_BASE		@ test if we run from flash or RAM
-	cmp	r0, r1			@ don't reloc during debug
-	beq	stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		@ r2 <- size of armboot
-	add	r2, r0, r2		@ r2 <- source end address
-
-copy_loop:				@ copy 32 bytes at a time
-	ldmia	r0!, {r3 - r10}		@ copy from source address [r0]
-	stmia	r1!, {r3 - r10}		@ copy to   target address [r1]
-	cmp	r0, r2			@ until source end address [r2]
-	blo	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack */
-stack_setup:
-	ldr	r0, _TEXT_BASE		@ upper 128 KiB: relocated uboot
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN @ malloc area
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE @ bdinfo
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		@ leave 3 words for abort-stack
-	bic	sp, sp, #7		@ 8-byte alignment for ABI compliance
-
-	/* Clear BSS (if any). Is below tx (watch load addr - need space) */
-clear_bss:
-	ldr	r0, _bss_start		@ find start of bss segment
-	ldr	r1, _bss_end		@ stop here
-	mov	r2, #0x00000000		@ clear value
-clbss_l:
-	str	r2, [r0]		@ clear BSS location
-	cmp	r0, r1			@ are we at the end yet
-	add	r0, r0, #4		@ increment clear index pointer
-	bne	clbss_l			@ keep clearing till at end
-
-	ldr	pc, _start_armboot	@ jump to C code
-
-_start_armboot: .word start_armboot
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*************************************************************************
  *
  * CPU_init_critical registers
@@ -461,14 +365,8 @@ cpu_init_crit:
 						@ user stack
 	stmia	sp, {r0 - r12}			@ Save user registers (now in
 						@ svc mode) r0-r12
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE + 8)	@ set base 2 words into abort
-#else
 	ldr	r2, IRQ_STACK_START_IN		@ set base 2 words into abort
 						@ stack
-#endif
 	ldmia	r2, {r2 - r3}			@ get values for "aborted" pc
 						@ and cpsr (into parm regs)
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
@@ -504,14 +402,8 @@ cpu_init_crit:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r13, _armboot_start		@ setup our mode stack (enter
-	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move to reserved a couple
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack (enter
 						@ in banked mode)
-#endif
 
 	str	lr, [r13]			@ save caller lr in position 0
 						@ of saved stack
@@ -532,14 +424,8 @@ cpu_init_crit:
 	sub	r13, r13, #4			@ space on current stack for
 						@ scratch reg.
 	str	r0, [r13]			@ save R0's value.
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r0, _armboot_start		@ get data regions start
-	sub	r0, r0, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
-	sub	r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8)	@ move past gbl and a couple
-#else
 	ldr	r0, IRQ_STACK_START_IN		@ get data regions start
 						@ spots for abort stack
-#endif
 	str	lr, [r0]			@ save caller lr in position 0
 						@ of saved stack
 	mrs	r0, spsr			@ get the spsr
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index 836c33b..8d1aebc 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -27,6 +27,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 #include <asm/arch/ixp425.h>
@@ -97,12 +98,6 @@ _fiq:			.word fiq
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
  */
@@ -126,7 +121,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -326,7 +320,6 @@ stack_setup:
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -351,9 +344,8 @@ fixloop:
 	str	r4, [r2]
 	add	r2, r2, #4
 	cmp	r2, r3
-	bne	fixloop
+	blo	fixloop
 #endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -393,190 +385,6 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 
 _board_init_r: .word board_init_r
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-/****************************************************************************/
-/*									    */
-/* the actual reset code						    */
-/*									    */
-/****************************************************************************/
-
-reset:
-	/* disable mmu, set big-endian */
-	mov	r0, #0xf8
-	mcr	p15, 0, r0, c1, c0, 0
-	CPWAIT  r0
-
-	/* invalidate I & D caches & BTB */
-	mcr	p15, 0, r0, c7, c7, 0
-	CPWAIT	r0
-
-	/* invalidate I & Data TLB */
-	mcr	p15, 0, r0, c8, c7, 0
-	CPWAIT r0
-
-	/* drain write and fill buffers */
-	mcr	p15, 0, r0, c7, c10, 4
-	CPWAIT	r0
-
-	/* disable write buffer coalescing */
-	mrc	p15, 0, r0, c1, c0, 1
-	orr	r0, r0, #1
-	mcr	p15, 0, r0, c1, c0, 1
-	CPWAIT	r0
-
-	/* set EXP CS0 to the optimum timing */
-	ldr	r1, =CONFIG_SYS_EXP_CS0
-	ldr     r2, =IXP425_EXP_CS0
-	str     r1, [r2]
-
-	/* make sure flash is visible at 0 */
-#if 0
-	ldr	r2, =IXP425_EXP_CFG0
-	ldr     r1, [r2]
-	orr     r1, r1, #0x80000000
-	str     r1, [r2]
-#endif
-	mov	r1, #CONFIG_SYS_SDR_CONFIG
-	ldr     r2, =IXP425_SDR_CONFIG
-	str     r1, [r2]
-
-	/* disable refresh cycles */
-	mov	r1, #0
-	ldr     r3, =IXP425_SDR_REFRESH
-	str	r1, [r3]
-
-	/* send nop command */
-	mov	r1, #3
-	ldr	r4, =IXP425_SDR_IR
-	str	r1, [r4]
-	DELAY_FOR 0x4000, r0
-
-	/* set SDRAM internal refresh val */
-	ldr	r1, =CONFIG_SYS_SDRAM_REFRESH_CNT
-	str     r1, [r3]
-	DELAY_FOR 0x4000, r0
-
-	/* send precharge-all command to close all open banks */
-	mov     r1, #2
-	str     r1, [r4]
-	DELAY_FOR 0x4000, r0
-
-	/* provide 8 auto-refresh cycles */
-	mov     r1, #4
-	mov     r5, #8
-111:    str	r1, [r4]
-	DELAY_FOR 0x100, r0
-	subs	r5, r5, #1
-	bne	111b
-
-	/* set mode register in sdram */
-	mov	r1, #CONFIG_SYS_SDR_MODE_CONFIG
-	str	r1, [r4]
-	DELAY_FOR 0x4000, r0
-
-	/* send normal operation command */
-	mov	r1, #6
-	str	r1, [r4]
-	DELAY_FOR 0x4000, r0
-
-	/* copy */
-	mov     r0, #0
-	mov     r4, r0
-	add     r2, r0, #CONFIG_SYS_MONITOR_LEN
-	mov     r1, #0x10000000
-	mov     r5, r1
-
-    30:
-	ldr     r3, [r0], #4
-	str     r3, [r1], #4
-	cmp     r0, r2
-	bne     30b
-
-	/* invalidate I & D caches & BTB */
-	mcr	p15, 0, r0, c7, c7, 0
-	CPWAIT	r0
-
-	/* invalidate I & Data TLB */
-	mcr	p15, 0, r0, c8, c7, 0
-	CPWAIT r0
-
-	/* drain write and fill buffers */
-	mcr	p15, 0, r0, c7, c10, 4
-	CPWAIT	r0
-
-	/* move flash to 0x50000000 */
-	ldr	r2, =IXP425_EXP_CFG0
-	ldr     r1, [r2]
-	bic     r1, r1, #0x80000000
-	str     r1, [r2]
-
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	/* invalidate I & Data TLB */
-	mcr	p15, 0, r0, c8, c7, 0
-	CPWAIT r0
-
-	/* enable I cache */
-	mrc     p15, 0, r0, c1, c0, 0
-	orr     r0, r0, #MMU_Control_I
-	mcr     p15, 0, r0, c1, c0, 0
-	CPWAIT  r0
-
-	mrs	r0,cpsr			/* set the cpu to SVC32 mode	    */
-	bic	r0,r0,#0x1f		/* (superviser mode, M=10011)	    */
-	orr	r0,r0,#0x13
-	msr	cpsr,r0
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment        */
-	ldr	r1, _bss_end		/* stop here                        */
-	mov	r2, #0x00000000		/* clear                            */
-
-clbss_l:str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	blo	clbss_l
-
-	ldr	pc, _start_armboot
-
-_start_armboot: .word start_armboot
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 
 /****************************************************************************/
 /*									    */
@@ -617,13 +425,7 @@ _start_armboot: .word start_armboot
 	stmia	sp, {r0 - r12}			/* Calling r0-r12	    */
 	add	r8, sp, #S_PC
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	ldmia	r2, {r2 - r4}			/* get pc, cpsr, old_r0	    */
 	add	r0, sp, #S_FRAME_SIZE		/* restore sp_SVC	    */
 
@@ -658,13 +460,7 @@ _start_armboot: .word start_armboot
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S
index d944860..fd8a40b 100644
--- a/arch/arm/cpu/lh7a40x/start.S
+++ b/arch/arm/cpu/lh7a40x/start.S
@@ -24,11 +24,10 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
-
 /*
  *************************************************************************
  *
@@ -76,12 +75,6 @@ _fiq:			.word fiq
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
  */
@@ -105,7 +98,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -215,7 +207,6 @@ stack_setup:
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -240,9 +231,8 @@ fixloop:
 	str	r4, [r2]
 	add	r2, r2, #4
 	cmp	r2, r3
-	bne	fixloop
+	blo	fixloop
 #endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -279,100 +269,6 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 
 _board_init_r: .word board_init_r
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-#define pWDTCTL		0x80001400  /* Watchdog Timer control register */
-#define pINTENC		0x8000050C  /* Interupt-Controller enable clear register */
-#define pCLKSET		0x80000420  /* clock divisor register */
-
-	/* disable watchdog, set watchdog control register to
-	 * all zeros (default reset)
-	 */
-	ldr     r0, =pWDTCTL
-	mov     r1, #0x0
-	str     r1, [r0]
-
-	/*
-	 * mask all IRQs by setting all bits in the INTENC register (default)
-	 */
-	mov	r1, #0xffffffff
-	ldr	r0, =pINTENC
-	str	r1, [r0]
-
-	/* FCLK:HCLK:PCLK = 1:2:2 */
-	/* default FCLK is 200 MHz, using 14.7456 MHz fin */
-	ldr	r0, =pCLKSET
-	ldr r1, =0x0004ee39
-@	ldr r1, =0x0005ee39	@ 1: 2: 4
-	str	r1, [r0]
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment        */
-	@add	r0, r0, #4		/* start at first byte of bss       */
-					/*   why inc. 4 bytes past then?    */
-	ldr	r1, _bss_end		/* stop here                        */
-	mov	r2, #0x00000000		/* clear                            */
-
-clbss_l:str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	blo	clbss_l
-
-	ldr	pc, _start_armboot
-
-_start_armboot:	.word start_armboot
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*
  *************************************************************************
  *
@@ -461,13 +357,7 @@ cpu_init_crit:
 	.macro	bad_save_user_regs
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0-r12
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	ldmia	r2, {r2 - r3}			@ get pc, cpsr
 	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
 
@@ -498,13 +388,7 @@ cpu_init_crit:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/arch/arm/cpu/pxa/cpu.c b/arch/arm/cpu/pxa/cpu.c
index 3ea3458..7d49cbb 100644
--- a/arch/arm/cpu/pxa/cpu.c
+++ b/arch/arm/cpu/pxa/cpu.c
@@ -312,7 +312,7 @@ void pxa_wakeup(void)
 int arch_cpu_init(void)
 {
 	pxa_gpio_setup();
-//	pxa_wait_ticks(0x8000);
+/*	pxa_wait_ticks(0x8000); */
 	pxa_wakeup();
 	pxa_interrupt_setup();
 	pxa_clock_setup();
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index 684e44e..ae358a5 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -8,6 +8,7 @@
  *  Copyright (C) 2002	Kyle Harris <kharris@nexus-tech.net>
  *  Copyright (C) 2003	Robert Schwebel <r.schwebel@pengutronix.de>
  *  Copyright (C) 2003	Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
+ *  Copyright (c) 2010	Marek Vasut <marek.vasut@gmail.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -28,10 +29,10 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/macro.h>
 
 /* takes care the CP15 update has taken place */
 .macro CPWAIT reg
@@ -94,20 +95,16 @@ _fiq:			.word fiq
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE
 
-.globl _armboot_start
-_armboot_start:
-	.word _start
-
 /*
  * These are defined in the board-specific linker script.
  */
-.globl _bss_start
-_bss_start:
-	.word __bss_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+	.word __bss_start - _start
 
-.globl _bss_end
-_bss_end:
-	.word _end
+.globl _bss_end_ofs
+_bss_end_ofs:
+	.word _end - _start
 
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
@@ -127,30 +124,6 @@ FIQ_STACK_START:
 IRQ_STACK_START_IN:
 	.word	0x0badc0de
 
-.globl _datarel_start
-_datarel_start:
-	.word __datarel_start
-
-.globl _datarelrolocal_start
-_datarelrolocal_start:
-	.word __datarelrolocal_start
-
-.globl _datarellocal_start
-_datarellocal_start:
-	.word __datarellocal_start
-
-.globl _datarelro_start
-_datarelro_start:
-	.word __datarelro_start
-
-.globl _got_start
-_got_start:
-	.word __got_start
-
-.globl _got_end
-_got_end:
-	.word __got_end
-
 /*
  * the actual reset code
  */
@@ -272,13 +245,11 @@ stack_setup:
 
 	adr	r0, _start
 	ldr	r2, _TEXT_BASE
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot	    */
-	add	r2, r0, r2		/* r2 <- source end address	    */
+	ldr	r3, _bss_start_ofs
+	add	r2, r0, r3		/* r2 <- source end address	    */
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 	stmfd sp!, {r0-r12}
 copy_loop:
 	ldmia	r0!, {r3-r5, r7-r11}	/* copy from source address [r0]    */
@@ -288,36 +259,53 @@ copy_loop:
 	ldmfd sp!, {r0-r12}
 
 #ifndef CONFIG_PRELOADER
-	/* fix got entries */
-	ldr	r1, _TEXT_BASE		/* Text base */
-	mov	r0, r7			/* reloc addr */
-	ldr	r2, _got_start		/* addr in Flash */
-	ldr	r3, _got_end		/* addr in Flash */
-	sub	r3, r3, r1
-	add	r3, r3, r0
-	sub	r2, r2, r1
-	add	r2, r2, r0
-
+	/*
+	 * fix .rel.dyn relocations
+	 */
+	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
+	sub	r9, r7, r0		/* r9 <- relocation offset */
+	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
+	add	r10, r10, r0		/* r10 <- sym table in FLASH */
+	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
+	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
+	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
+	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
 fixloop:
-	ldr	r4, [r2]
-	sub	r4, r4, r1
-	add	r4, r4, r0
-	str	r4, [r2]
-	add	r2, r2, #4
+	ldr	r0, [r2]	/* r0 <- location to fix up, IN FLASH! */
+	add	r0, r9		/* r0 <- location to fix up in RAM */
+	ldr	r1, [r2, #4]
+	and	r8, r1, #0xff
+	cmp	r8, #23		/* relative fixup? */
+	beq	fixrel
+	cmp	r8, #2		/* absolute fixup? */
+	beq	fixabs
+	/* ignore unknown type of fixup */
+	b	fixnext
+fixabs:
+	/* absolute fix: set location to (offset) symbol value */
+	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
+	add	r1, r10, r1		/* r1 <- address of symbol in table */
+	ldr	r1, [r1, #4]		/* r1 <- symbol value */
+	add	r1, r9			/* r1 <- relocated sym addr */
+	b	fixnext
+fixrel:
+	/* relative fix: increase location by offset */
+	ldr	r1, [r0]
+	add	r1, r1, r9
+fixnext:
+	str	r1, [r0]
+	add	r2, r2, #8	/* each rel.dyn entry is 8 bytes */
 	cmp	r2, r3
-	bne	fixloop
-#endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
+	blo	fixloop
+#endif	/* #ifndef CONFIG_PRELOADER */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
-	ldr	r0, _bss_start
-	ldr	r1, _bss_end
+	ldr	r0, _bss_start_ofs
+	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
 	mov	r4, r7			/* reloc addr */
-	sub	r0, r0, r3
 	add	r0, r0, r4
-	sub	r1, r1, r3
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
@@ -325,32 +313,41 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 	add	r0, r0, #4
 	cmp	r0, r1
 	bne	clbss_l
-#endif
+#endif	/* #ifndef CONFIG_PRELOADER */
 
 /*
  * We are done. Do not return, instead branch to second part of board
  * initialization, now running from RAM.
  */
 #ifdef CONFIG_ONENAND_IPL
-	ldr     pc, _start_oneboot
+	ldr     r0, _start_oneboot_ofs
+	mov	pc, r0
 
-_start_oneboot: .word start_oneboot
+_start_oneboot_ofs
+	: .word start_oneboot
 #else
-	ldr	r0, _TEXT_BASE
-	ldr	r2, _board_init_r
-	sub	r2, r2, r0
-	add	r2, r2, r7	/* position from board_init_r in RAM */
+	ldr	r0, _board_init_r_ofs
+	adr	r1, _start
+	add	lr, r0, r1
+	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
 	mov	r1, r7		/* dest_addr */
 	/* jump to it ... */
-	mov	lr, r2
 	mov	pc, lr
 
-_board_init_r: .word board_init_r
-#endif
+_board_init_r_ofs:
+	.word board_init_r - _start
+#endif	/* CONFIG_ONENAND_IPL */
+
+_rel_dyn_start_ofs:
+	.word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+	.word __rel_dyn_end - _start
+_dynsym_start_ofs:
+	.word __dynsym_start - _start
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
+#else /* CONFIG_PRELOADER */
 
 /****************************************************************************/
 /*									    */
@@ -375,7 +372,7 @@ reset:
 	/* Start OneNAND IPL */
 	ldr	pc, =start_oneboot
 
-#endif /* #if !defined(CONFIG_ONENAND_IPL) */
+#endif /* CONFIG_PRELOADER */
 
 #ifndef CONFIG_PRELOADER
 /****************************************************************************/
@@ -417,13 +414,7 @@ reset:
 	stmia	sp, {r0 - r12}			/* Calling r0-r12	    */
 	add	r8, sp, #S_PC
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	ldmia	r2, {r2 - r4}			/* get pc, cpsr, old_r0	    */
 	add	r0, sp, #S_FRAME_SIZE		/* restore sp_SVC	    */
 
@@ -458,13 +449,7 @@ reset:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
@@ -483,7 +468,7 @@ reset:
 	.macro get_fiq_stack			@ setup FIQ stack
 	ldr	sp, FIQ_STACK_START
 	.endm
-#endif	/* CONFIG_PRELOADER */
+#endif	/* CONFIG_PRELOADER
 
 
 /****************************************************************************/
@@ -497,7 +482,7 @@ reset:
 do_hang:
 	ldr	sp, _TEXT_BASE			/* use 32 words abort stack */
 	bl	hang				/* hang and never return */
-#else	/* !CONFIG_PRELOADER */
+#else
 	.align	5
 undefined_instruction:
 	get_bad_stack
@@ -567,13 +552,7 @@ fiq:
 /*									    */
 /****************************************************************************/
 /* Operating System Timer */
-OSTIMER_BASE:	.word	0x40a00000
-#define OSMR3	0x0C
-#define OSCR	0x10
-#define OWER	0x18
-#define OIER	0x1C
-
-	.align	5
+.align	5
 .globl reset_cpu
 
 	/* FIXME: this code is PXA250 specific. How is this handled on	    */
@@ -583,18 +562,20 @@ reset_cpu:
 
 	/* We set OWE:WME (watchdog enable) and wait until timeout happens  */
 
-	ldr	r0, OSTIMER_BASE
-	ldr	r1, [r0, #OWER]
+	ldr	r0, =OWER
+	ldr	r1, [r0]
 	orr	r1, r1, #0x0001			/* bit0: WME		    */
-	str	r1, [r0, #OWER]
+	str	r1, [r0]
 
 	/* OS timer does only wrap every 1165 seconds, so we have to set    */
 	/* the match register as well.					    */
 
-	ldr	r1, [r0, #OSCR]			/* read OS timer	    */
+	ldr	r0, =OSCR
+	ldr	r1, [r0]			/* read OS timer	    */
 	add	r1, r1, #0x800			/* let OSMR3 match after    */
 	add	r1, r1, #0x800			/* 4096*(1/3.6864MHz)=1ms   */
-	str	r1, [r0, #OSMR3]
+	ldr	r0, =OSMR3
+	str	r1, [r0]
 
 reset_endless:
 
@@ -620,4 +601,4 @@ mmu_table:
 	.word	(__base << 20) | 0xc12
 	.set	__base, __base + 1
 	.endr
-#endif
+#endif	/* CONFIG_PRELOADER */
diff --git a/arch/arm/cpu/pxa/u-boot.lds b/arch/arm/cpu/pxa/u-boot.lds
index 74a4c6e..d6643f9 100644
--- a/arch/arm/cpu/pxa/u-boot.lds
+++ b/arch/arm/cpu/pxa/u-boot.lds
@@ -41,21 +41,18 @@ SECTIONS
 	. = ALIGN(4);
 	.data : {
 		*(.data)
-	__datarel_start = .;
-		*(.data.rel)
-	__datarelrolocal_start = .;
-		*(.data.rel.ro.local)
-	__datarellocal_start = .;
-		*(.data.rel.local)
-	__datarelro_start = .;
-		*(.data.rel.ro)
 	}
 
-	__got_start = .;
 	. = ALIGN(4);
-	.got : { *(.got) }
+	__rel_dyn_start = .;
+	.rel.dyn : { *(.rel.dyn) }
+	__rel_dyn_end = .;
+
+	__dynsym_start = .;
+	.dynsym : { *(.dynsym) }
+
+	. = ALIGN(4);
 
-	__got_end = .;
 	. = .;
 	__u_boot_cmd_start = .;
 	.u_boot_cmd : { *(.u_boot_cmd) }
diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index 20091b2..67b2c6a 100644
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -27,11 +27,10 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
-
 /*
  * Jump vector table
  */
@@ -67,12 +66,6 @@ _start:	b       reset
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
  */
@@ -96,7 +89,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -187,7 +179,6 @@ stack_setup:
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -212,7 +203,7 @@ fixloop:
 	str	r4, [r2]
 	add	r2, r2, #4
 	cmp	r2, r3
-	bne	fixloop
+	blo	fixloop
 #endif
 /*
 	now copy to sram the interrupt vector
@@ -226,7 +217,6 @@ vector_copy_loop:
 	stmia	r1!, {r3-r10}
 	cmp	r0, r2
 	blo	vector_copy_loop
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -266,84 +256,6 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 
 _board_init_r: .word board_init_r
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0x13
-	msr	cpsr,r0
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-	/*
-	 * before relocating, we have to setup RAM timing
-	 * because memory timing is board-dependend, you will
-	 * find a lowlevel_init.S in your board directory.
-	 */
-	bl	lowlevel_init
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-
-/*
-	now copy to sram the interrupt vector
-*/
-	adr	r0, real_vectors
-	add	r2, r0, #1024
-	ldr	r1, =0x0c000000
-	add	r1, r1, #0x08
-vector_copy_loop:
-	ldmia	r0!, {r3-r10}
-	stmia	r1!, {r3-r10}
-	cmp	r0, r2
-	blo	vector_copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-	ldr	pc, _start_armboot
-
-_start_armboot:	.word start_armboot
-
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*
  *************************************************************************
  *
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 8eabb66..ace0c07 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -25,11 +25,10 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
-
 /*
  *************************************************************************
  *
@@ -77,12 +76,6 @@ _fiq:			.word fiq
 _TEXT_BASE:
 	.word	CONFIG_SYS_TEXT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
  */
@@ -106,7 +99,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -191,7 +183,6 @@ stack_setup:
 	cmp	r0, r6
 	beq	clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
@@ -216,9 +207,8 @@ fixloop:
 	str	r4, [r2]
 	add	r2, r2, #4
 	cmp	r2, r3
-	bne	fixloop
+	blo	fixloop
 #endif
-#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -255,75 +245,6 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 
 _board_init_r: .word board_init_r
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0x13
-	msr	cpsr,r0
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment        */
-	ldr	r1, _bss_end		/* stop here                        */
-	mov	r2, #0x00000000		/* clear                            */
-
-clbss_l:str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	blo	clbss_l
-
-	ldr	pc, _start_armboot
-
-_start_armboot:	.word start_armboot
-
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*
  *************************************************************************
  *
@@ -442,13 +363,7 @@ cpu_init_crit:
 	stmia	sp, {r0 - r12}			@ Calling r0-r12
 	add     r8, sp, #S_PC
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	ldmia	r2, {r2 - r4}                   @ get pc, cpsr, old_r0
 	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
 
@@ -479,13 +394,7 @@ cpu_init_crit:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/arch/arm/include/asm/arch-at91/at91_shdwn.h b/arch/arm/include/asm/arch-at91/at91_shdwn.h
new file mode 100644
index 0000000..874f988
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/at91_shdwn.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * Shutdown Controller
+ * Based on AT91SAM9XE datasheet
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SHDWN_H
+#define AT91_SHDWN_H
+
+#ifndef __ASSEMBLY__
+
+struct at91_shdwn {
+	u32	cr;	/* Control Rer.    WO */
+	u32	mr;	/* Mode Register   RW 0x00000003 */
+	u32	sr;	/* Status Register RO 0x00000000 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_SHDW_CR_KEY	0xa5000000
+#define AT91_SHDW_CR_SHDW	0x00000001
+
+#define AT91_SHDW_MR_RTTWKEN	0x00010000
+#define AT91_SHDW_MR_CPTWK0	0x000000f0
+#define AT91_SHDW_MR_WKMODE0H2L	0x00000002
+#define AT91_SHDW_MR_WKMODE0L2H	0x00000001
+
+#define AT91_SHDW_SR_RTTWK	0x00010000
+#define AT91_SHDW_SR_WAKEUP0	0x00000001
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9260.h b/arch/arm/include/asm/arch-at91/at91sam9260.h
index cb34a94..7fd60b7 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9260.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9260.h
@@ -56,6 +56,7 @@
 #define AT91_PIO_BASE		0xfffff400
 #define AT91_PMC_BASE		0xfffffc00
 #define AT91_RSTC_BASE		0xfffffd00
+#define AT91_SHDWN_BASE		0xfffffd10
 #define AT91_RTT_BASE		0xfffffd20
 #define AT91_PIT_BASE		0xfffffd30
 #define AT91_WDT_BASE		0xfffffd40
diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
index f5f80e0..6b44d61 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/include/asm/arch-at91/hardware.h
@@ -23,6 +23,7 @@
 #include <asm/arch/at91sam9260.h>
 #define AT91_BASE_MCI	AT91SAM9260_BASE_MCI
 #define AT91_BASE_SPI	AT91SAM9260_BASE_SPI0
+#define AT91_BASE_SPI1	AT91SAM9260_BASE_SPI1
 #define AT91_ID_UHP	AT91SAM9260_ID_UHP
 #define AT91_PMC_UHP	AT91SAM926x_PMC_UHP
 #elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
diff --git a/arch/arm/include/asm/arch-at91/memory-map.h b/arch/arm/include/asm/arch-at91/memory-map.h
index f605f37..d489fa2 100644
--- a/arch/arm/include/asm/arch-at91/memory-map.h
+++ b/arch/arm/include/asm/arch-at91/memory-map.h
@@ -31,5 +31,6 @@
 #define USART2_BASE AT91_USART2
 #define USART3_BASE (AT91_BASE_SYS + AT91_DBGU)
 #define SPI0_BASE	AT91_BASE_SPI
+#define SPI1_BASE	AT91_BASE_SPI1
 
 #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index f709bd8..f5a2929 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -108,11 +108,11 @@ struct gpt_regs {
 
 /* Watchdog Timer (WDOG) registers */
 struct wdog_regs {
-	u32 wcr;	/* Control */
-	u32 wsr;	/* Service */
-	u32 wrsr;	/* Reset Status */
-	u32 wicr;	/* Interrupt Control */
-	u32 wmcr;	/* Misc Control */
+	u16 wcr;	/* Control */
+	u16 wsr;	/* Service */
+	u16 wrsr;	/* Reset Status */
+	u16 wicr;	/* Interrupt Control */
+	u16 wmcr;	/* Misc Control */
 };
 
 /* IIM control registers */
@@ -308,7 +308,9 @@ struct iim_regs {
 #define GPT_CTRL_TEN		1		/* Timer enable	*/
 
 /* WDOG enable */
-#define WCR_WDE 0x04
+#define WCR_WDE 		0x04
+#define WSR_UNLOCK1		0x5555
+#define WSR_UNLOCK2		0xAAAA
 
 /* FUSE bank offsets */
 #define IIM0_MAC		0x1a
diff --git a/arch/arm/include/asm/arch-mx5/crm_regs.h b/arch/arm/include/asm/arch-mx5/crm_regs.h
index 14aa231..4ed8eb3 100644
--- a/arch/arm/include/asm/arch-mx5/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx5/crm_regs.h
@@ -189,4 +189,15 @@ struct mxc_ccm_reg {
 #define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET		0
 #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK		0x7
 
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_IPU_HS_MASK			(0x1 << 17)
+
+/* Define the bits in register CCGRx */
+#define MXC_CCM_CCGR_CG_MASK				0x3
+
+#define MXC_CCM_CCGR5_CG5_OFFSET			10
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS                 (0x1 << 18)
+
 #endif				/* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index 3ddda40..0b6249a 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -26,7 +26,8 @@
 /*
  * IRAM
  */
-#define IRAM_BASE_ADDR		0x1FFE8000	/* internal ram */
+#define IRAM_BASE_ADDR		0x1FFE0000	/* internal ram */
+#define IRAM_SIZE		0x00020000	/* 128 KB */
 /*
  * Graphics Memory of GPU
  */
diff --git a/arch/arm/include/asm/arch-pxa/macro.h b/arch/arm/include/asm/arch-pxa/macro.h
deleted file mode 100644
index 85958dd..0000000
--- a/arch/arm/include/asm/arch-pxa/macro.h
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * arch/arm/include/asm/arch-pxa/macro.h
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_PXA_MACRO_H__
-#define __ASM_ARCH_PXA_MACRO_H__
-#ifdef __ASSEMBLY__
-
-#include <asm/macro.h>
-#include <asm/arch/pxa-regs.h>
-
-/*
- * This macro performs a 32bit write to a memory location and makes sure the
- * write operation really happened by performing a read back.
- *
- * Clobbered regs: r4, r5
- */
-.macro	write32rb addr, data
-	ldr	r4, =\addr
-	ldr	r5, =\data
-	str	r5, [r4]
-	ldr	r5, [r4]
-.endm
-
-/*
- * This macro waits according to OSCR incrementation
- *
- * Clobbered regs: r4, r5, r6
- */
-.macro	pxa_wait_ticks ticks
-	ldr	r4, =OSCR
-	mov	r5, #0
-	str	r5, [r4]
-	ldr	r5, =\ticks
-1:
-	ldr	r6, [r4]
-	cmp	r5, r6
-	bgt	1b
-.endm
-
-/*
- * This macro sets up the GPIO pins of the PXA2xx/PXA3xx CPU
- *
- * Clobbered regs: r4, r5
- */
-.macro	pxa_gpio_setup
-	write32	GPSR0, CONFIG_SYS_GPSR0_VAL
-	write32	GPSR1, CONFIG_SYS_GPSR1_VAL
-	write32	GPSR2, CONFIG_SYS_GPSR2_VAL
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-	write32	GPSR3, CONFIG_SYS_GPSR3_VAL
-#endif
-
-	write32	GPCR0, CONFIG_SYS_GPCR0_VAL
-	write32	GPCR1, CONFIG_SYS_GPCR1_VAL
-	write32	GPCR2, CONFIG_SYS_GPCR2_VAL
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-	write32	GPCR3, CONFIG_SYS_GPCR3_VAL
-#endif
-
-	write32	GPDR0, CONFIG_SYS_GPDR0_VAL
-	write32	GPDR1, CONFIG_SYS_GPDR1_VAL
-	write32	GPDR2, CONFIG_SYS_GPDR2_VAL
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-	write32	GPDR3, CONFIG_SYS_GPDR3_VAL
-#endif
-
-	write32	GAFR0_L, CONFIG_SYS_GAFR0_L_VAL
-	write32	GAFR0_U, CONFIG_SYS_GAFR0_U_VAL
-	write32	GAFR1_L, CONFIG_SYS_GAFR1_L_VAL
-	write32	GAFR1_U, CONFIG_SYS_GAFR1_U_VAL
-	write32	GAFR2_L, CONFIG_SYS_GAFR2_L_VAL
-	write32	GAFR2_U, CONFIG_SYS_GAFR2_U_VAL
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-	write32	GAFR3_L, CONFIG_SYS_GAFR3_L_VAL
-	write32	GAFR3_U, CONFIG_SYS_GAFR3_U_VAL
-#endif
-
-	write32	PSSR, CONFIG_SYS_PSSR_VAL
-.endm
-
-/*
- * This macro sets up the Memory controller of the PXA2xx CPU
- *
- * WARNING: This macro uses internally r3 and r7 regs for MEMC_BASE
- *          and CONFIG_SYS_MDREFR_VAL correspondingly. Please do not
- *          use this regs for other purpose inside this macro.
- *
- * Clobbered regs: r3, r4, r5, r6, r7
- */
-.macro	pxa_mem_setup
-	/* This comes handy when setting MDREFR */
-	ldr	r3, =MEMC_BASE
-
-	/*
-	 * 1) Initialize Asynchronous static memory controller
-	 */
-
-	/* MSC0: nCS(0,1) */
-	write32rb	(MEMC_BASE + MSC0_OFFSET), CONFIG_SYS_MSC0_VAL
-	/* MSC1: nCS(2,3) */
-	write32rb	(MEMC_BASE + MSC1_OFFSET), CONFIG_SYS_MSC1_VAL
-	/* MSC2: nCS(4,5) */
-	write32rb	(MEMC_BASE + MSC2_OFFSET), CONFIG_SYS_MSC2_VAL
-
-	/*
-	 * 2) Initialize Card Interface
-	 */
-
-	/* MECR: Memory Expansion Card Register */
-	write32rb	(MEMC_BASE + MECR_OFFSET), CONFIG_SYS_MECR_VAL
-	/* MCMEM0: Card Interface slot 0 timing */
-	write32rb	(MEMC_BASE + MCMEM0_OFFSET), CONFIG_SYS_MCMEM0_VAL
-	/* MCMEM1: Card Interface slot 1 timing */
-	write32rb	(MEMC_BASE + MCMEM1_OFFSET), CONFIG_SYS_MCMEM1_VAL
-	/* MCATT0: Card Interface Attribute Space Timing, slot 0 */
-	write32rb	(MEMC_BASE + MCATT0_OFFSET), CONFIG_SYS_MCATT0_VAL
-	/* MCATT1: Card Interface Attribute Space Timing, slot 1 */
-	write32rb	(MEMC_BASE + MCATT1_OFFSET), CONFIG_SYS_MCATT1_VAL
-	/* MCIO0: Card Interface I/O Space Timing, slot 0 */
-	write32rb	(MEMC_BASE + MCIO0_OFFSET), CONFIG_SYS_MCIO0_VAL
-	/* MCIO1: Card Interface I/O Space Timing, slot 1 */
-	write32rb	(MEMC_BASE + MCIO1_OFFSET), CONFIG_SYS_MCIO1_VAL
-
-	/*
-	 * 3) Configure Fly-By DMA register
-	 */
-
-	write32rb	(MEMC_BASE + FLYCNFG_OFFSET), CONFIG_SYS_FLYCNFG_VAL
-
-	/*
-	 * 4) Initialize Timing for Sync Memory (SDCLK0)
-	 */
-
-	/*
-	 * Before accessing MDREFR we need a valid DRI field, so we set
-	 * this to power on defaults + DRI field.
-	 */
-	ldr	r5, [r3, #MDREFR_OFFSET]
-	bic	r5, r5, #0x0ff
-	bic	r5, r5, #0xf00	/* MDREFR user config with zeroed DRI */
-
-	ldr	r4, =CONFIG_SYS_MDREFR_VAL
-	mov	r7, r4
-	lsl	r4, #20
-	lsr	r4, #20		/* Get a valid DRI field */
-
-	orr	r5, r5, r4	/* MDREFR user config with correct DRI */
-
-	orr	r5, #MDREFR_K0RUN
-	orr	r5, #MDREFR_SLFRSH
-	bic	r5, #MDREFR_APD
-	bic	r5, #MDREFR_E1PIN
-
-	str	r5, [r3, #MDREFR_OFFSET]
-	ldr	r4, [r3, #MDREFR_OFFSET]
-
-	/*
-	 * 5) Initialize Synchronous Static Memory (Flash/Peripherals)
-	 */
-
-	/* Initialize SXCNFG register. Assert the enable bits.
-	 *
-	 * Write SXMRS to cause an MRS command to all enabled banks of
-	 * synchronous static memory. Note that SXLCR need not be written
-	 * at this time.
-	 */
-	write32rb	(MEMC_BASE + SXCNFG_OFFSET), CONFIG_SYS_SXCNFG_VAL
-
-	/*
-	 * 6) Initialize SDRAM
-	 */
-
-	bic	r7, #MDREFR_SLFRSH
-	str	r7, [r3, #MDREFR_OFFSET]
-	ldr	r4, [r3, #MDREFR_OFFSET]
-
-	orr	r7, #MDREFR_E1PIN
-	str	r7, [r3, #MDREFR_OFFSET]
-	ldr	r4, [r3, #MDREFR_OFFSET]
-
-	/*
-	 * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure
-	 *    but not enable each SDRAM partition pair.
-	 */
-
-	/* Fetch platform value of MDCNFG */
-	ldr	r4, =CONFIG_SYS_MDCNFG_VAL
-	/* Disable all sdram banks */
-	bic	r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
-	bic	r4, r4, #(MDCNFG_DE2|MDCNFG_DE3)
-	/* Write initial value of MDCNFG, w/o enabling sdram banks */
-	str	r4, [r3, #MDCNFG_OFFSET]
-	ldr	r4, [r3, #MDCNFG_OFFSET]
-
-	/* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */
-	pxa_wait_ticks	0x300
-
-	/*
-	 * 8) Trigger a number (usually 8) refresh cycles by attempting
-	 *    non-burst read or write accesses to disabled SDRAM, as commonly
-	 *    specified in the power up sequence documented in SDRAM data
-	 *    sheets. The address(es) used for this purpose must not be
-	 *    cacheable.
-	 */
-
-	ldr	r4, =CONFIG_SYS_DRAM_BASE
-.rept 9
-	str	r5, [r4]
-.endr
-
-	/*
-	 * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1).
-	 */
-
-	ldr	r5, =CONFIG_SYS_MDCNFG_VAL
-	ldr	r4, =(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3)
-	and	r5, r5, r4
-	ldr     r4, [r3, #MDCNFG_OFFSET]
-	orr	r4, r4, r5
-	str     r4, [r3, #MDCNFG_OFFSET]
-	ldr     r4, [r3, #MDCNFG_OFFSET]
-
-	/*
-	 * 10) Write MDMRS.
-	 */
-
-	ldr     r4, =CONFIG_SYS_MDMRS_VAL
-	str     r4, [r3, #MDMRS_OFFSET]
-	ldr     r4, [r3, #MDMRS_OFFSET]
-
-	/*
-	 * 11) Enable APD
-	 */
-
-	ldr	r4, [r3, #MDREFR_OFFSET]
-	and	r7, r7, #MDREFR_APD
-	orr	r4, r4, r7
-	str	r4, [r3, #MDREFR_OFFSET]
-	ldr	r4, [r3, #MDREFR_OFFSET]
-.endm
-
-/*
- * This macro tests if the CPU woke up from sleep and eventually resumes
- *
- * Clobbered regs: r4, r5
- */
-.macro	pxa_wakeup
-	ldr	r4, =RCSR
-	ldr	r5, [r4]
-	and	r5, r5, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR)
-	str	r5, [r4]
-	teq	r5, #RCSR_SMR
-
-	bne	pxa_wakeup_exit
-
-	ldr	r4, =PSSR
-	mov	r5, #PSSR_PH
-	str	r5, [r4]
-
-	ldr	r4, =PSPR
-	ldr	pc, [r4]
-pxa_wakeup_exit:
-.endm
-
-/*
- * This macro disables all interupts on PXA2xx/PXA3xx CPU
- *
- * Clobbered regs: r4, r5
- */
-.macro	pxa_intr_setup
-	write32	ICLR, 0
-	write32	ICMR, 0
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-	write32	ICLR2, 0
-	write32	ICMR2, 0
-#endif
-.endm
-
-/*
- * This macro configures clock on PXA2xx/PXA3xx CPU
- *
- * Clobbered regs: r4, r5
- */
-.macro	pxa_clock_setup
-	/* Disable the peripheral clocks, and set the core clock frequency */
-
-	/* Turn Off ALL on-chip peripheral clocks for re-configuration */
-	write32	CKEN, CONFIG_SYS_CKEN
-
-	/* Write CCCR */
-	write32	CCCR, CONFIG_SYS_CCCR
-
-#ifdef CONFIG_RTC
-	/* enable the 32Khz oscillator for RTC and PowerManager */
-	write32	OSCC, #OSCC_OON
-	ldr	r4, =OSCC
-
-	/* Spin here until OSCC.OOK get set, meaning the PLL has settled. */
-2:
-	ldr	r5, [r4]
-	ands	r5, r5, #1
-	beq	2b
-#endif
-.endm
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_PXA_MACRO_H__ */
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 4124f0a..c60dba2 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -21,9 +21,6 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all ARM boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 #endif
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 6dae432..ada3fbb 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -30,7 +30,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
@@ -61,7 +61,6 @@ typedef	struct	global_data {
 	unsigned long	tbu;
 	unsigned long long	timer_reset_value;
 #endif
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	unsigned long	relocaddr;	/* Start address of U-Boot in RAM */
 	phys_size_t	ram_size;	/* RAM size */
 	unsigned long	mon_len;	/* monitor len */
@@ -71,7 +70,6 @@ typedef	struct	global_data {
 #if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE))
 	unsigned long	tlb_addr;
 #endif
-#endif
 	void		**jt;		/* jump table */
 	char		env_buf[32];	/* buffer for getenv() before reloc. */
 } gd_t;
diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h
index 4ac4f61..33973a3 100644
--- a/arch/arm/include/asm/u-boot-arm.h
+++ b/arch/arm/include/asm/u-boot-arm.h
@@ -34,16 +34,12 @@ extern ulong _bss_start_ofs;	/* BSS start relative to _start */
 extern ulong _bss_end_ofs;		/* BSS end relative to _start */
 extern ulong IRQ_STACK_START;	/* top of IRQ stack */
 extern ulong FIQ_STACK_START;	/* top of FIQ stack */
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-extern ulong _armboot_start_ofs;	/* code start */
-#else
 extern ulong _TEXT_BASE;	/* code start */
 extern ulong _datarel_start_ofs;
 extern ulong _datarelrolocal_start_ofs;
 extern ulong _datarellocal_start_ofs;
 extern ulong _datarelro_start_ofs;
 extern ulong IRQ_STACK_START_IN;	/* 8 bytes in IRQ stack */
-#endif
 
 /* cpu/.../cpu.c */
 int	cpu_init(void);
@@ -56,9 +52,7 @@ int	arch_misc_init(void);
 /* board/.../... */
 int	board_init(void);
 int	dram_init (void);
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 void	dram_init_banksize (void);
-#endif
 void	setup_serial_tag (struct tag **params);
 void	setup_revision_tag (struct tag **params);
 
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index ffe261b..1fd5f83 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -127,11 +127,7 @@ static int init_baudrate (void)
 	char tmp[64];	/* long enough for environment variables */
 	int i = getenv_f("baudrate", tmp, sizeof (tmp));
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	gd->baudrate = (i > 0)
-#else
-	gd->bd->bi_baudrate = gd->baudrate = (i > 0)
-#endif
 			? (int) simple_strtoul (tmp, NULL, 10)
 			: CONFIG_BAUDRATE;
 
@@ -142,11 +138,7 @@ static int display_banner (void)
 {
 	printf ("\n\n%s\n\n", version_string);
 	debug ("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	       _TEXT_BASE,
-#else
-	       _armboot_start,
-#endif
 	       _bss_start_ofs+_TEXT_BASE, _bss_end_ofs+_TEXT_BASE);
 #ifdef CONFIG_MODEM_SUPPORT
 	debug ("Modem Support enabled\n");
@@ -190,16 +182,6 @@ static int display_dram_config (void)
 	return (0);
 }
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-#ifndef CONFIG_SYS_NO_FLASH
-static void display_flash_config (ulong size)
-{
-	puts ("Flash: ");
-	print_size (size, "\n");
-}
-#endif /* CONFIG_SYS_NO_FLASH */
-#endif
-
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 static int init_func_i2c (void)
 {
@@ -246,214 +228,6 @@ typedef int (init_fnc_t) (void);
 
 int print_cpuinfo (void);
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-init_fnc_t *init_sequence[] = {
-#if defined(CONFIG_ARCH_CPU_INIT)
-	arch_cpu_init,		/* basic arch cpu dependent setup */
-#endif
-	board_init,		/* basic board dependent setup */
-#if defined(CONFIG_USE_IRQ)
-	interrupt_init,		/* set up exceptions */
-#endif
-	timer_init,		/* initialize timer */
-#ifdef CONFIG_FSL_ESDHC
-	get_clocks,
-#endif
-	env_init,		/* initialize environment */
-	init_baudrate,		/* initialze baudrate settings */
-	serial_init,		/* serial communications setup */
-	console_init_f,		/* stage 1 init of console */
-	display_banner,		/* say that we are here */
-#if defined(CONFIG_DISPLAY_CPUINFO)
-	print_cpuinfo,		/* display cpu info (and speed) */
-#endif
-#if defined(CONFIG_DISPLAY_BOARDINFO)
-	checkboard,		/* display board info */
-#endif
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
-	init_func_i2c,
-#endif
-	dram_init,		/* configure available RAM banks */
-#if defined(CONFIG_CMD_PCI) || defined (CONFIG_PCI)
-	arm_pci_init,
-#endif
-	display_dram_config,
-	NULL,
-};
-
-void start_armboot (void)
-{
-	init_fnc_t **init_fnc_ptr;
-	char *s;
-#if defined(CONFIG_VFD) || defined(CONFIG_LCD)
-	unsigned long addr;
-#endif
-
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t*)(_armboot_start - CONFIG_SYS_MALLOC_LEN - sizeof(gd_t));
-	/* compiler optimization barrier needed for GCC >= 3.4 */
-	__asm__ __volatile__("": : :"memory");
-
-	memset ((void*)gd, 0, sizeof (gd_t));
-	gd->bd = (bd_t*)((char*)gd - sizeof(bd_t));
-	memset (gd->bd, 0, sizeof (bd_t));
-
-	gd->flags |= GD_FLG_RELOC;
-
-	monitor_flash_len = _bss_start - _armboot_start;
-
-	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-		if ((*init_fnc_ptr)() != 0) {
-			hang ();
-		}
-	}
-
-	/* armboot_start is defined in the board-specific linker script */
-	mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN,
-			CONFIG_SYS_MALLOC_LEN);
-
-#ifndef CONFIG_SYS_NO_FLASH
-	/* configure available FLASH banks */
-	display_flash_config (flash_init ());
-#endif /* CONFIG_SYS_NO_FLASH */
-
-#ifdef CONFIG_VFD
-#	ifndef PAGE_SIZE
-#	  define PAGE_SIZE 4096
-#	endif
-	/*
-	 * reserve memory for VFD display (always full pages)
-	 */
-	/* bss_end is defined in the board-specific linker script */
-	addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
-	vfd_setmem (addr);
-	gd->fb_base = addr;
-#endif /* CONFIG_VFD */
-
-#ifdef CONFIG_LCD
-	/* board init may have inited fb_base */
-	if (!gd->fb_base) {
-#		ifndef PAGE_SIZE
-#		  define PAGE_SIZE 4096
-#		endif
-		/*
-		 * reserve memory for LCD display (always full pages)
-		 */
-		/* bss_end is defined in the board-specific linker script */
-		addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
-		lcd_setmem (addr);
-		gd->fb_base = addr;
-	}
-#endif /* CONFIG_LCD */
-
-#if defined(CONFIG_CMD_NAND)
-	puts ("NAND:  ");
-	nand_init();		/* go init the NAND */
-#endif
-
-#if defined(CONFIG_CMD_ONENAND)
-	onenand_init();
-#endif
-
-#ifdef CONFIG_HAS_DATAFLASH
-	AT91F_DataflashInit();
-	dataflash_print_info();
-#endif
-
-#ifdef CONFIG_GENERIC_MMC
-/*
- * MMC initialization is called before relocating env.
- * Thus It is required that operations like pin multiplexer
- * be put in board_init.
- */
-	puts ("MMC:   ");
-	mmc_initialize (gd->bd);
-#endif
-
-	/* initialize environment */
-	env_relocate ();
-
-#ifdef CONFIG_VFD
-	/* must do this after the framebuffer is allocated */
-	drv_vfd_init();
-#endif /* CONFIG_VFD */
-
-#ifdef CONFIG_SERIAL_MULTI
-	serial_initialize();
-#endif
-
-	/* IP Address */
-	gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
-
-	stdio_init ();	/* get the devices list going. */
-
-	jumptable_init ();
-
-#if defined(CONFIG_API)
-	/* Initialize API */
-	api_init ();
-#endif
-
-	console_init_r ();	/* fully init console as a device */
-
-#if defined(CONFIG_ARCH_MISC_INIT)
-	/* miscellaneous arch dependent initialisations */
-	arch_misc_init ();
-#endif
-#if defined(CONFIG_MISC_INIT_R)
-	/* miscellaneous platform dependent initialisations */
-	misc_init_r ();
-#endif
-
-	/* enable exceptions */
-	enable_interrupts ();
-
-	/* Perform network card initialisation if necessary */
-
-#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
-	/* XXX: this needs to be moved to board init */
-	if (getenv ("ethaddr")) {
-		uchar enetaddr[6];
-		eth_getenv_enetaddr("ethaddr", enetaddr);
-		smc_set_mac_addr(enetaddr);
-	}
-#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
-
-	/* Initialize from environment */
-	if ((s = getenv ("loadaddr")) != NULL) {
-		load_addr = simple_strtoul (s, NULL, 16);
-	}
-#if defined(CONFIG_CMD_NET)
-	if ((s = getenv ("bootfile")) != NULL) {
-		copy_filename (BootFile, s, sizeof (BootFile));
-	}
-#endif
-
-#ifdef BOARD_LATE_INIT
-	board_late_init ();
-#endif
-
-#ifdef CONFIG_BITBANGMII
-	bb_miiphy_init();
-#endif
-#if defined(CONFIG_CMD_NET)
-#if defined(CONFIG_NET_MULTI)
-	puts ("Net:   ");
-#endif
-	eth_initialize(gd->bd);
-#if defined(CONFIG_RESET_PHY_R)
-	debug ("Reset Ethernet PHY\n");
-	reset_phy();
-#endif
-#endif
-	/* main_loop() can return to retry autoboot, if so just run it again. */
-	for (;;) {
-		main_loop ();
-	}
-
-	/* NOTREACHED - no way out of command loop except booting */
-}
-#else
 void __dram_init_banksize(void)
 {
 	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
@@ -679,15 +453,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #if !defined(CONFIG_SYS_NO_FLASH)
 	ulong flash_size;
 #endif
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
-	extern void malloc_bin_reloc (void);
-#if defined(CONFIG_CMD_BMP)
-	extern void bmp_reloc(void);
-#endif
-#if defined(CONFIG_CMD_I2C)
-	extern void i2c_reloc(void);
-#endif
-#endif
 
 	gd = id;
 	bd = gd->bd;
@@ -704,36 +469,16 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
-	/*
-	 * We have to relocate the command table manually
-	 */
-	fixup_cmdtable(&__u_boot_cmd_start,
-		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#if defined(CONFIG_CMD_BMP)
-	bmp_reloc();
-#endif
-#if defined(CONFIG_CMD_I2C)
-	i2c_reloc();
-#endif
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
-
 #ifdef CONFIG_LOGBUFFER
 	logbuff_init_ptrs ();
 #endif
 #ifdef CONFIG_POST
 	post_output_backlog ();
-#ifndef CONFIG_RELOC_FIXUP_WORKS
-	post_reloc ();
-#endif
 #endif
 
 	/* The Malloc area is immediately below the monitor copy in DRAM */
 	malloc_start = dest_addr - TOTAL_MALLOC_LEN;
 	mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
-	malloc_bin_reloc ();
-#endif
 
 #if !defined(CONFIG_SYS_NO_FLASH)
 	puts ("FLASH: ");
@@ -897,8 +642,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	/* NOTREACHED - no way out of command loop except booting */
 }
 
-#endif /* defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 void hang (void)
 {
 	puts ("### ERROR ### Please RESET the board ###\n");
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 2e7b2e1..a1649ee 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -177,8 +177,6 @@ static int fixup_memory_node(void *blob)
 static int bootm_linux_fdt(int machid, bootm_headers_t *images)
 {
 	ulong rd_len;
-	bd_t *bd = gd->bd;
-	char *s;
 	void (*kernel_entry)(int zero, int dt_machid, void *dtblob);
 	ulong bootmap_base = getenv_bootm_low();
 	ulong of_size = images->ft_len;
diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c
index fe6d459..d9175f0 100644
--- a/arch/arm/lib/cache-cp15.c
+++ b/arch/arm/lib/cache-cp15.c
@@ -44,7 +44,6 @@ static void cp_delay (void)
 	asm volatile("" : : : "memory");
 }
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 static inline void dram_bank_mmu_setup(int bank)
 {
 	u32 *page_table = (u32 *)gd->tlb_addr;
@@ -58,18 +57,11 @@ static inline void dram_bank_mmu_setup(int bank)
 		page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP;
 	}
 }
-#endif
 
 /* to activate the MMU we need to set up virtual memory: use 1M areas */
 static inline void mmu_setup(void)
 {
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	u32 *page_table = (u32 *)gd->tlb_addr;
-#else
-	static u32 __attribute__((aligned(16384))) page_table[4096];
-	bd_t *bd = gd->bd;
-	int j;
-#endif
 	int i;
 	u32 reg;
 
@@ -77,20 +69,9 @@ static inline void mmu_setup(void)
 	for (i = 0; i < 4096; i++)
 		page_table[i] = i << 20 | (3 << 10) | 0x12;
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 		dram_bank_mmu_setup(i);
 	}
-#else
-	/* Then, enable cacheable and bufferable for RAM only */
-	for (j = 0; j < CONFIG_NR_DRAM_BANKS; j++) {
-		for (i = bd->bi_dram[j].start >> 20;
-			i < (bd->bi_dram[j].start + bd->bi_dram[j].size) >> 20;
-			i++) {
-			page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP;
-		}
-	}
-#endif
 
 	/* Copy the page table address to cp15 */
 	asm volatile("mcr p15, 0, %0, c2, c0, 0"
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index 5715168..30686fe 100644
--- a/arch/arm/lib/cache.c
+++ b/arch/arm/lib/cache.c
@@ -38,7 +38,7 @@ void  flush_cache (unsigned long dummy1, unsigned long dummy2)
 	/* disable write buffer as well (page 2-22) */
 	asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
 #endif
-#ifdef CONFIG_ARMV7
+#ifdef CONFIG_OMAP34XX
 	void v7_flush_cache_all(void);
 
 	v7_flush_cache_all();
diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c
index 9a21e7b..74ff5ce 100644
--- a/arch/arm/lib/interrupts.c
+++ b/arch/arm/lib/interrupts.c
@@ -46,12 +46,8 @@ int interrupt_init (void)
 	/*
 	 * setup up stacks if necessary
 	 */
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	IRQ_STACK_START = gd->irq_sp - 4;
 	IRQ_STACK_START_IN = gd->irq_sp + 8;
-#else
-	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
-#endif
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 
 	return arch_interrupt_init();
@@ -86,7 +82,6 @@ int disable_interrupts (void)
 	return (old & 0x80) == 0;
 }
 #else
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 int interrupt_init (void)
 {
 	/*
@@ -96,7 +91,6 @@ int interrupt_init (void)
 
 	return 0;
 }
-#endif
 
 void enable_interrupts (void)
 {
diff --git a/arch/avr32/cpu/start.S b/arch/avr32/cpu/start.S
index 06bf4c6..97140e9 100644
--- a/arch/avr32/cpu/start.S
+++ b/arch/avr32/cpu/start.S
@@ -19,6 +19,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
+#include <asm-offsets.h>
 #include <config.h>
 #include <asm/ptrace.h>
 #include <asm/sysreg.h>
diff --git a/arch/avr32/include/asm/config.h b/arch/avr32/include/asm/config.h
index 049c44e..02fbfb3 100644
--- a/arch/avr32/include/asm/config.h
+++ b/arch/avr32/include/asm/config.h
@@ -21,4 +21,6 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #endif
diff --git a/arch/avr32/include/asm/global_data.h b/arch/avr32/include/asm/global_data.h
index 5a7aed9..4ef8fc5 100644
--- a/arch/avr32/include/asm/global_data.h
+++ b/arch/avr32/include/asm/global_data.h
@@ -29,7 +29,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c
index 96ccc7f..8b56237 100644
--- a/arch/avr32/lib/board.c
+++ b/arch/avr32/lib/board.c
@@ -272,13 +272,13 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 
 	monitor_flash_len = _edata - _text;
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
 #ifndef CONFIG_ENV_IS_NOWHERE
diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk
index a330084..ab117ca 100644
--- a/arch/blackfin/config.mk
+++ b/arch/blackfin/config.mk
@@ -26,8 +26,6 @@ CROSS_COMPILE ?= bfin-uclinux-
 STANDALONE_LOAD_ADDR = 0x1000 -m elf32bfin
 
 CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE)))
-CONFIG_ENV_OFFSET := $(strip $(subst ",,$(CONFIG_ENV_OFFSET)))
-CONFIG_ENV_SIZE := $(strip $(subst ",,$(CONFIG_ENV_SIZE)))
 
 PLATFORM_RELFLAGS += -ffixed-P3 -fomit-frame-pointer -mno-fdpic
 PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN
diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h
index 215e0f2..0437252 100644
--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -9,13 +9,13 @@
 #ifndef __ASM_BLACKFIN_CONFIG_POST_H__
 #define __ASM_BLACKFIN_CONFIG_POST_H__
 
+/* Some of our defines use this (like CONFIG_SYS_GBL_DATA_ADDR) */
+#include <asm-offsets.h>
+
 #ifndef CONFIG_BFIN_SCRATCH_REG
 # define CONFIG_BFIN_SCRATCH_REG retn
 #endif
 
-/* Relocation to SDRAM works on all Blackfin boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 /* Make sure the structure is properly aligned */
 #if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR)
 # error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned
@@ -101,11 +101,8 @@
 #ifndef CONFIG_SYS_MALLOC_BASE
 # define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
 #endif
-#ifndef CONFIG_SYS_GBL_DATA_SIZE
-# define CONFIG_SYS_GBL_DATA_SIZE (128)
-#endif
 #ifndef CONFIG_SYS_GBL_DATA_ADDR
-# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE)
 #endif
 #ifndef CONFIG_STACKBASE
 # define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4)
diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h
index d5514b0..eba5e93 100644
--- a/arch/blackfin/include/asm/global_data.h
+++ b/arch/blackfin/include/asm/global_data.h
@@ -37,7 +37,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
  */
 typedef struct global_data {
 	bd_t *bd;
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index fcfd174..8eca7d6 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -237,12 +237,12 @@ void board_init_f(ulong bootflag)
 #endif
 
 #ifdef DEBUG
-	if (CONFIG_SYS_GBL_DATA_SIZE < sizeof(*gd))
+	if (GENERATED_GBL_DATA_SIZE < sizeof(*gd))
 		hang();
 #endif
 	serial_early_puts("Init global data\n");
 	gd = (gd_t *) (CONFIG_SYS_GBL_DATA_ADDR);
-	memset((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
+	memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
 
 	/* Board data initialization */
 	addr = (CONFIG_SYS_GBL_DATA_ADDR + sizeof(gd_t));
diff --git a/arch/i386/include/asm/config.h b/arch/i386/include/asm/config.h
index 1952de7..049c44e 100644
--- a/arch/i386/include/asm/config.h
+++ b/arch/i386/include/asm/config.h
@@ -21,6 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif
diff --git a/arch/i386/include/asm/global_data.h b/arch/i386/include/asm/global_data.h
index 5971123..e3f8a25 100644
--- a/arch/i386/include/asm/global_data.h
+++ b/arch/i386/include/asm/global_data.h
@@ -30,7 +30,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 #ifndef __ASSEMBLY__
diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S
index ac71096..d09d492 100644
--- a/arch/m68k/cpu/mcf5227x/start.S
+++ b/arch/m68k/cpu/mcf5227x/start.S
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <timestamp.h>
 #include "version.h"
diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S
index 20b50e7..a726b59 100644
--- a/arch/m68k/cpu/mcf523x/start.S
+++ b/arch/m68k/cpu/mcf523x/start.S
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <timestamp.h>
 #include "version.h"
diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S
index d1f3d83..f0cfa6f 100644
--- a/arch/m68k/cpu/mcf52x2/start.S
+++ b/arch/m68k/cpu/mcf52x2/start.S
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <timestamp.h>
 #include "version.h"
diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S
index a80b0a9..53ac471 100644
--- a/arch/m68k/cpu/mcf532x/start.S
+++ b/arch/m68k/cpu/mcf532x/start.S
@@ -24,6 +24,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <timestamp.h>
 #include "version.h"
diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S
index 8b69d1f..5255f37 100644
--- a/arch/m68k/cpu/mcf5445x/start.S
+++ b/arch/m68k/cpu/mcf5445x/start.S
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <timestamp.h>
 #include "version.h"
diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S
index 8411862..e30923f 100644
--- a/arch/m68k/cpu/mcf547x_8x/start.S
+++ b/arch/m68k/cpu/mcf547x_8x/start.S
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <timestamp.h>
 #include "version.h"
diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h
index ec2cc16..51050a3 100644
--- a/arch/m68k/include/asm/config.h
+++ b/arch/m68k/include/asm/config.h
@@ -21,6 +21,8 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 #define CONFIG_SYS_BOOT_GET_CMDLINE
diff --git a/arch/m68k/include/asm/global_data.h b/arch/m68k/include/asm/global_data.h
index 3a36f82..fc486fd 100644
--- a/arch/m68k/include/asm/global_data.h
+++ b/arch/m68k/include/asm/global_data.h
@@ -30,7 +30,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index 4541e24..9a51908 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -341,7 +341,7 @@ board_init_f (ulong bootflag)
 	bd->bi_memsize   = gd->ram_size;	/* size  of  DRAM memory in bytes */
 #ifdef CONFIG_SYS_INIT_RAM_ADDR
 	bd->bi_sramstart = CONFIG_SYS_INIT_RAM_ADDR;	/* start of  SRAM memory	*/
-	bd->bi_sramsize  = CONFIG_SYS_INIT_RAM_END;	/* size  of  SRAM memory	*/
+	bd->bi_sramsize  = CONFIG_SYS_INIT_RAM_SIZE;	/* size  of  SRAM memory	*/
 #endif
 	bd->bi_mbar_base = CONFIG_SYS_MBAR;		/* base of internal registers */
 
@@ -420,13 +420,13 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	monitor_flash_len = (ulong)&__init_end - dest_addr;
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
 #ifndef CONFIG_ENV_IS_NOWHERE
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 98c248f..93a9efd 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -24,6 +24,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 
 	.text
@@ -97,7 +98,7 @@ _start:
 	 * 0xC: 0xB808XXXX
 	 *
 	 * then it is necessary to count address for storing the most significant
-	 * 16bits from _exception_handler address and copy it to 
+	 * 16bits from _exception_handler address and copy it to
 	 * 0xa address. Big endian use offset in r10=0 that's why is it just
 	 * 0xa address. The same is done for the least significant 16 bits
 	 * for 0xe address.
diff --git a/arch/microblaze/include/asm/config.h b/arch/microblaze/include/asm/config.h
index 8a9064b..049c44e 100644
--- a/arch/microblaze/include/asm/config.h
+++ b/arch/microblaze/include/asm/config.h
@@ -21,7 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all Microblaze boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif
diff --git a/arch/microblaze/include/asm/global_data.h b/arch/microblaze/include/asm/global_data.h
index 03444ef..557ad27 100644
--- a/arch/microblaze/include/asm/global_data.h
+++ b/arch/microblaze/include/asm/global_data.h
@@ -31,7 +31,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
index 84267cd..eeef579 100644
--- a/arch/microblaze/lib/board.c
+++ b/arch/microblaze/lib/board.c
@@ -96,7 +96,7 @@ void board_init (void)
 	ulong flash_size = 0;
 #endif
 	asm ("nop");	/* FIXME gd is not initialize - wait */
-	memset ((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
+	memset ((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
 	gd->bd = (bd_t *) (gd + 1);	/* At end of global data */
 	gd->baudrate = CONFIG_BAUDRATE;
 	bd = gd->bd;
diff --git a/arch/mips/cpu/cache.S b/arch/mips/cpu/cache.S
index ff4f11c..4b30c89 100644
--- a/arch/mips/cpu/cache.S
+++ b/arch/mips/cpu/cache.S
@@ -22,6 +22,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <asm/asm.h>
 #include <asm/regdef.h>
diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
index 57db589..d6bcef6 100644
--- a/arch/mips/cpu/start.S
+++ b/arch/mips/cpu/start.S
@@ -22,6 +22,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h
index 049c44e..02fbfb3 100644
--- a/arch/mips/include/asm/config.h
+++ b/arch/mips/include/asm/config.h
@@ -21,4 +21,6 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #endif
diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h
index bf1bfc3..271a290 100644
--- a/arch/mips/include/asm/global_data.h
+++ b/arch/mips/include/asm/global_data.h
@@ -33,7 +33,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
index 4a22f7b..f317124 100644
--- a/arch/mips/lib/board.c
+++ b/arch/mips/lib/board.c
@@ -295,13 +295,13 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	monitor_flash_len = (ulong)&uboot_end_data - dest_addr;
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
 #ifndef CONFIG_ENV_IS_NOWHERE
diff --git a/arch/nios2/cpu/start.S b/arch/nios2/cpu/start.S
index 76d3b52..9b0f52d 100644
--- a/arch/nios2/cpu/start.S
+++ b/arch/nios2/cpu/start.S
@@ -21,7 +21,7 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <timestamp.h>
 #include <version.h>
diff --git a/arch/nios2/include/asm/config.h b/arch/nios2/include/asm/config.h
index 011d603..049c44e 100644
--- a/arch/nios2/include/asm/config.h
+++ b/arch/nios2/include/asm/config.h
@@ -21,7 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all NIOS2 boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif
diff --git a/arch/nios2/lib/board.c b/arch/nios2/lib/board.c
index f83e691..f6c6bc1 100644
--- a/arch/nios2/lib/board.c
+++ b/arch/nios2/lib/board.c
@@ -95,7 +95,7 @@ void board_init (void)
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
-	memset( gd, 0, CONFIG_SYS_GBL_DATA_SIZE );
+	memset( gd, 0, GENERATED_GBL_DATA_SIZE );
 
 	gd->bd = (bd_t *)(gd+1);	/* At end of global data */
 	gd->baudrate = CONFIG_BAUDRATE;
diff --git a/arch/powerpc/cpu/74xx_7xx/start.S b/arch/powerpc/cpu/74xx_7xx/start.S
index 573e6d0..280781e 100644
--- a/arch/powerpc/cpu/74xx_7xx/start.S
+++ b/arch/powerpc/cpu/74xx_7xx/start.S
@@ -32,6 +32,7 @@
  *  board_init lies at a quite high address and when the cpu has
  *  jumped there, everything is ok.
  */
+#include <asm-offsets.h>
 #include <config.h>
 #include <74xx_7xx.h>
 #include <timestamp.h>
@@ -819,7 +820,7 @@ lock_ram_in_cache:
 	 */
 	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
 	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
-	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+	li	r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
 		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
 	mtctr	r4
 1:
@@ -840,7 +841,7 @@ unlock_ram_in_cache:
 	/* invalidate the INIT_RAM section */
 	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
 	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
-	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+	li	r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
 		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
 	mtctr	r4
 1:	icbi	r0, r3
diff --git a/arch/powerpc/cpu/mpc512x/start.S b/arch/powerpc/cpu/mpc512x/start.S
index 2265c8c..fe35190 100644
--- a/arch/powerpc/cpu/mpc512x/start.S
+++ b/arch/powerpc/cpu/mpc512x/start.S
@@ -29,6 +29,7 @@
  *  U-Boot - Startup Code for MPC512x based Embedded Boards
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <timestamp.h>
 #include <version.h>
diff --git a/arch/powerpc/cpu/mpc5xx/start.S b/arch/powerpc/cpu/mpc5xx/start.S
index da42557..63449c3 100644
--- a/arch/powerpc/cpu/mpc5xx/start.S
+++ b/arch/powerpc/cpu/mpc5xx/start.S
@@ -30,6 +30,7 @@
  *
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <mpc5xx.h>
 #include <timestamp.h>
diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S
index 92858fc..ad54677 100644
--- a/arch/powerpc/cpu/mpc5xxx/start.S
+++ b/arch/powerpc/cpu/mpc5xxx/start.S
@@ -25,6 +25,7 @@
 /*
  *  U-Boot - Startup Code for MPC5xxx CPUs
  */
+#include <asm-offsets.h>
 #include <config.h>
 #include <mpc5xxx.h>
 #include <timestamp.h>
diff --git a/arch/powerpc/cpu/mpc8220/start.S b/arch/powerpc/cpu/mpc8220/start.S
index b5c160b..b029e84 100644
--- a/arch/powerpc/cpu/mpc8220/start.S
+++ b/arch/powerpc/cpu/mpc8220/start.S
@@ -25,6 +25,7 @@
 /*
  *  U-Boot - Startup Code for MPC8220 CPUs
  */
+#include <asm-offsets.h>
 #include <config.h>
 #include <mpc8220.h>
 #include <timestamp.h>
diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S
index d10231e..616de58 100644
--- a/arch/powerpc/cpu/mpc824x/start.S
+++ b/arch/powerpc/cpu/mpc824x/start.S
@@ -37,6 +37,7 @@
  * board_init will change CS0 to be positioned at the correct
  * address and (s)dram will be positioned at address 0
  */
+#include <asm-offsets.h>
 #include <config.h>
 #include <mpc824x.h>
 #include <timestamp.h>
diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S
index 55c64ea..521a639 100644
--- a/arch/powerpc/cpu/mpc8260/start.S
+++ b/arch/powerpc/cpu/mpc8260/start.S
@@ -25,6 +25,7 @@
 /*
  *  U-Boot - Startup Code for MPC8260 PowerPC based Embedded Boards
  */
+#include <asm-offsets.h>
 #include <config.h>
 #include <mpc8260.h>
 #include <timestamp.h>
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c
index f01c09a..7a1cae7 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c
@@ -329,7 +329,7 @@ void cpu_init_f (volatile immap_t * im)
 #ifdef CONFIG_USB_EHCI_FSL
 #ifndef CONFIG_MPC834x
 	uint32_t temp;
-	struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
+	struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB_ADDR;
 
 	/* Configure interface. */
 	setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S
index 536604f..a35697d 100644
--- a/arch/powerpc/cpu/mpc83xx/start.S
+++ b/arch/powerpc/cpu/mpc83xx/start.S
@@ -27,6 +27,7 @@
  *  U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <mpc83xx.h>
 #include <timestamp.h>
@@ -1072,7 +1073,7 @@ lock_ram_in_cache:
 	 */
 	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
 	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
-	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+	li	r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
 		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
 	mtctr	r4
 1:
@@ -1094,7 +1095,7 @@ unlock_ram_in_cache:
 	/* invalidate the INIT_RAM section */
 	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
 	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
-	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+	li	r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
 		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
 	mtctr	r4
 1:	icbi	r0, r3
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 53cefaf..56a853e 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <mpc85xx.h>
 #include <version.h>
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 7e5e6b1..291557d 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -28,6 +28,7 @@
  *
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <mpc85xx.h>
 #include <timestamp.h>
diff --git a/arch/powerpc/cpu/mpc86xx/start.S b/arch/powerpc/cpu/mpc86xx/start.S
index 3817f19..6127115 100644
--- a/arch/powerpc/cpu/mpc86xx/start.S
+++ b/arch/powerpc/cpu/mpc86xx/start.S
@@ -30,6 +30,7 @@
  *  board_init lies at a quite high address and when the cpu has
  *  jumped there, everything is ok.
  */
+#include <asm-offsets.h>
 #include <config.h>
 #include <mpc86xx.h>
 #include <timestamp.h>
@@ -870,7 +871,7 @@ lock_ram_in_cache:
 	 */
 	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
 	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
-	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+	li	r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
 		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
 	mtctr	r4
 1:
@@ -905,7 +906,7 @@ unlock_ram_in_cache:
 	/* invalidate the INIT_RAM section */
 	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
 	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
-	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+	li	r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
 		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
 	mtctr	r4
 1:	icbi	r0, r3
diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S
index 4a8c5d9..9d022bf 100644
--- a/arch/powerpc/cpu/mpc8xx/start.S
+++ b/arch/powerpc/cpu/mpc8xx/start.S
@@ -37,6 +37,7 @@
  *  board_init will change CS0 to be positioned at the correct
  *  address and (s)dram will be positioned at address 0
  */
+#include <asm-offsets.h>
 #include <config.h>
 #include <mpc8xx.h>
 #include <timestamp.h>
diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index 87caea1..363becc 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -63,6 +63,7 @@
  *  board_init will change CS0 to be positioned at the correct
  *  address and (s)dram will be positioned at address 0
  */
+#include <asm-offsets.h>
 #include <config.h>
 #include <asm/ppc4xx.h>
 #include <timestamp.h>
@@ -182,8 +183,8 @@
 # endif
 #endif /* CONFIG_SYS_INIT_DCACHE_CS */
 
-#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10)))
-#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END!
+#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_SIZE > (4 << 10)))
+#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_SIZE!
 #endif
 
 /*
@@ -656,8 +657,8 @@ _start:
 	/* Clear Dcache to use as RAM */
 	addis	r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h
 	ori	r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
-	addis	r4,r0,CONFIG_SYS_INIT_RAM_END@h
-	ori	r4,r4,CONFIG_SYS_INIT_RAM_END@l
+	addis	r4,r0,CONFIG_SYS_INIT_RAM_SIZE@h
+	ori	r4,r4,CONFIG_SYS_INIT_RAM_SIZE@l
 	rlwinm. r5,r4,0,27,31
 	rlwinm	r5,r4,27,5,31
 	beq	..d_ran
@@ -1091,8 +1092,8 @@ _start:
 	lis	r3, CONFIG_SYS_INIT_RAM_ADDR@h
 	ori	r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
 
-	lis	r4, CONFIG_SYS_INIT_RAM_END@h
-	ori	r4, r4, CONFIG_SYS_INIT_RAM_END@l
+	lis	r4, CONFIG_SYS_INIT_RAM_SIZE@h
+	ori	r4, r4, CONFIG_SYS_INIT_RAM_SIZE@l
 
 	/*
 	 * Convert the size, in bytes, to the number of cache lines/blocks
@@ -1119,12 +1120,12 @@ _start:
 	lis	r1, CONFIG_SYS_INIT_RAM_ADDR@h
 	ori	r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
 
-	lis	r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h
-	ori	r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l
+	lis	r4, (CONFIG_SYS_INIT_RAM_SIZE >> 2)@h
+	ori	r4, r4, (CONFIG_SYS_INIT_RAM_SIZE >> 2)@l
 	mtctr	r4
 
 	lis	r2, CONFIG_SYS_INIT_RAM_ADDR@h
-	ori	r2, r2, CONFIG_SYS_INIT_RAM_END@l
+	ori	r2, r2, CONFIG_SYS_INIT_RAM_SIZE@l
 
 	lis	r4, CONFIG_SYS_INIT_RAM_PATTERN@h
 	ori	r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l
@@ -1399,7 +1400,7 @@ relocate_code:
 
 	/* Flush initial global data range */
 	mr	r3, r4
-	addi	r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l
+	addi	r4, r4, GENERATED_GBL_DATA_SIZE@l
 	bl	flush_dcache_range
 
 #if defined(CONFIG_SYS_INIT_DCACHE_CS)
@@ -1414,8 +1415,8 @@ relocate_code:
 	lis	r3, CONFIG_SYS_INIT_RAM_ADDR@h
 	ori	r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
 
-	lis	r4, CONFIG_SYS_INIT_RAM_END@h
-	ori	r4, r4, CONFIG_SYS_INIT_RAM_END@l
+	lis	r4, CONFIG_SYS_INIT_RAM_SIZE@h
+	ori	r4, r4, CONFIG_SYS_INIT_RAM_SIZE@l
 	add	r4, r4, r3
 
 	bl	invalidate_dcache_range
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index a1942ca..76dedeb 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -89,9 +89,6 @@
 #define CONFIG_SYS_NUM_TLBCAMS	16
 #endif
 
-/* Relocation to SDRAM works on all PPC boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 /* Since so many PPC SOCs have a semi-common LBC, define this here */
 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
 	defined(CONFIG_MPC83xx)
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index 2a323e1..2e218de 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -34,7 +34,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index c0c7fd4..2e0749d 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -175,6 +175,16 @@ void __board_add_ram_info(int use_default)
 }
 void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info")));
 
+int __board_flash_wp_on(void)
+{
+	/*
+	 * Most flashes can't be detected when write protection is enabled,
+	 * so provide a way to let U-Boot gracefully ignore write protected
+	 * devices.
+	 */
+	return 0;
+}
+int board_flash_wp_on(void) __attribute__((weak, alias("__board_flash_wp_on")));
 
 static int init_func_ram (void)
 {
@@ -698,7 +708,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #if !defined(CONFIG_SYS_NO_FLASH)
 	puts ("FLASH: ");
 
-	if ((flash_size = flash_init ()) > 0) {
+	if (board_flash_wp_on()) {
+		printf("Uninitialized - Write Protect On\n");
+		/* Since WP is on, we can't find real size.  Set to 0 */
+		flash_size = 0;
+	} else if ((flash_size = flash_init ()) > 0) {
 # ifdef CONFIG_SYS_FLASH_CHECKSUM
 		print_size (flash_size, "");
 		/*
diff --git a/arch/sh/config.mk b/arch/sh/config.mk
index 07ba68f..415c949 100644
--- a/arch/sh/config.mk
+++ b/arch/sh/config.mk
@@ -29,6 +29,6 @@ STANDALONE_LOAD_ADDR += -EB
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__
-PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE)
+PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(CONFIG_SYS_TEXT_BASE)
 
 LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds
diff --git a/arch/sh/cpu/sh2/start.S b/arch/sh/cpu/sh2/start.S
index 0ab867d..77043f6 100644
--- a/arch/sh/cpu/sh2/start.S
+++ b/arch/sh/cpu/sh2/start.S
@@ -18,6 +18,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
@@ -73,6 +74,6 @@ loop:
 ._reloc_dst_end:	.long	reloc_dst_end
 ._bss_start:		.long	bss_start
 ._bss_end:		.long	bss_end
-._gd_init:		.long	(_start - CONFIG_SYS_GBL_DATA_SIZE)
-._stack_init:	.long	(_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
+._gd_init:		.long	(_start - GENERATED_GBL_DATA_SIZE)
+._stack_init:	.long	(_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
 ._sh_generic_init:	.long	sh_generic_init
diff --git a/arch/sh/cpu/sh3/start.S b/arch/sh/cpu/sh3/start.S
index c0f8326..9dd2303 100644
--- a/arch/sh/cpu/sh3/start.S
+++ b/arch/sh/cpu/sh3/start.S
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
@@ -72,6 +73,6 @@ loop:
 ._reloc_dst_end:	.long	reloc_dst_end
 ._bss_start:		.long	bss_start
 ._bss_end:		.long	bss_end
-._gd_init:		.long	(_start - CONFIG_SYS_GBL_DATA_SIZE)
-._stack_init:	.long	(_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
+._gd_init:		.long	(_start - GENERATED_GBL_DATA_SIZE)
+._stack_init:	.long	(_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
 ._sh_generic_init:	.long	sh_generic_init
diff --git a/arch/sh/cpu/sh4/start.S b/arch/sh/cpu/sh4/start.S
index 711ae66..4b5f606 100644
--- a/arch/sh/cpu/sh4/start.S
+++ b/arch/sh/cpu/sh4/start.S
@@ -18,6 +18,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
@@ -69,6 +70,6 @@ loop:
 ._reloc_dst_end:	.long	reloc_dst_end
 ._bss_start:		.long	bss_start
 ._bss_end:		.long	bss_end
-._gd_init:		.long	(_start - CONFIG_SYS_GBL_DATA_SIZE)
-._stack_init:		.long	(_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
+._gd_init:		.long	(_start - GENERATED_GBL_DATA_SIZE)
+._stack_init:		.long	(_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
 ._sh_generic_init:	.long	sh_generic_init
diff --git a/arch/sh/include/asm/config.h b/arch/sh/include/asm/config.h
index 978cc92..049c44e 100644
--- a/arch/sh/include/asm/config.h
+++ b/arch/sh/include/asm/config.h
@@ -21,7 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all sh boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif
diff --git a/arch/sh/lib/board.c b/arch/sh/lib/board.c
index a302fc2..fe53ab4 100644
--- a/arch/sh/lib/board.c
+++ b/arch/sh/lib/board.c
@@ -89,7 +89,7 @@ static int sh_pci_init(void)
 
 static int sh_mem_env_init(void)
 {
-	mem_malloc_init(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_GBL_DATA_SIZE -
+	mem_malloc_init(CONFIG_SYS_TEXT_BASE - GENERATED_GBL_DATA_SIZE -
 			CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN - 16);
 	env_relocate();
 	jumptable_init();
@@ -144,7 +144,7 @@ void sh_generic_init(void)
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
 
-	memset(gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
+	memset(gd, 0, GENERATED_GBL_DATA_SIZE);
 
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
 
diff --git a/arch/sh/lib/bootm.c b/arch/sh/lib/bootm.c
index 9c58ed7..19b3a94 100644
--- a/arch/sh/lib/bootm.c
+++ b/arch/sh/lib/bootm.c
@@ -43,6 +43,41 @@ static void hexdump(unsigned char *buf, int len)
 }
 #endif
 
+#define MOUNT_ROOT_RDONLY	0x000
+#define RAMDISK_FLAGS		0x004
+#define ORIG_ROOT_DEV		0x008
+#define LOADER_TYPE			0x00c
+#define INITRD_START		0x010
+#define INITRD_SIZE			0x014
+#define COMMAND_LINE		0x100
+
+#define RD_PROMPT	(1<<15)
+#define RD_DOLOAD	(1<<14)
+#define CMD_ARG_RD_PROMPT	"prompt_ramdisk="
+#define CMD_ARG_RD_DOLOAD	"load_ramdisk="
+
+#ifdef CONFIG_SH_SDRAM_OFFSET
+#define GET_INITRD_START(initrd, linux) (initrd - linux + CONFIG_SH_SDRAM_OFFSET)
+#else
+#define GET_INITRD_START(initrd, linux) (initrd - linux)
+#endif
+
+static void set_sh_linux_param(unsigned long param_addr, unsigned long data)
+{
+	*(unsigned long *)(param_addr) = data;
+}
+
+static unsigned long sh_check_cmd_arg(char *cmdline, char *key, int base)
+{
+	unsigned long val = 0;
+	char *p = strstr(cmdline, key);
+	if (p) {
+		p += strlen(key);
+		val = simple_strtol(p, NULL, base);
+	}
+	return val;
+}
+
 int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
 {
 	/* Linux kernel load address */
@@ -51,7 +86,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 	unsigned char *param
 		= (unsigned char *)image_get_load(images->legacy_hdr_os);
 	/* Linux kernel command line */
-	char *cmdline = (char *)param + 0x100;
+	char *cmdline = (char *)param + COMMAND_LINE;
 	/* PAGE_SIZE */
 	unsigned long size = images->ep - (unsigned long)param;
 	char *bootargs = getenv("bootargs");
@@ -61,8 +96,37 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 
 	/* Setup parameters */
 	memset(param, 0, size);	/* Clear zero page */
+
+	/* Set commandline */
 	strcpy(cmdline, bootargs);
 
+	sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10);
+	/* Initrd */
+	if (images->rd_start || images->rd_end) {
+		unsigned long ramdisk_flags = 0;
+		int val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_PROMPT, 10);
+		if (val == 1)
+				ramdisk_flags |= RD_PROMPT;
+		else
+				ramdisk_flags &= ~RD_PROMPT;
+
+		val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10);
+		if (val == 1)
+				ramdisk_flags |= RD_DOLOAD;
+		else
+				ramdisk_flags &= ~RD_DOLOAD;
+
+		set_sh_linux_param((unsigned long)param + MOUNT_ROOT_RDONLY, 0x0001);
+		set_sh_linux_param((unsigned long)param + RAMDISK_FLAGS, ramdisk_flags);
+		set_sh_linux_param((unsigned long)param + ORIG_ROOT_DEV, 0x0200);
+		set_sh_linux_param((unsigned long)param + LOADER_TYPE, 0x0001);
+		set_sh_linux_param((unsigned long)param + INITRD_START,
+			GET_INITRD_START(images->rd_start, CONFIG_SYS_SDRAM_BASE));
+		set_sh_linux_param((unsigned long)param + INITRD_SIZE,
+			images->rd_end - images->rd_start);
+	}
+
+	/* Boot kernel */
 	kernel();
 	/* does not return */
 
diff --git a/arch/sparc/cpu/leon2/start.S b/arch/sparc/cpu/leon2/start.S
index dd58262..f22fb7e 100644
--- a/arch/sparc/cpu/leon2/start.S
+++ b/arch/sparc/cpu/leon2/start.S
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <asm/asmmacro.h>
 #include <asm/winmacro.h>
diff --git a/arch/sparc/cpu/leon3/start.S b/arch/sparc/cpu/leon3/start.S
index 5c0808a..56ae88d 100644
--- a/arch/sparc/cpu/leon3/start.S
+++ b/arch/sparc/cpu/leon3/start.S
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <asm/asmmacro.h>
 #include <asm/winmacro.h>
diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h
index b9fc656..e3b3dec 100644
--- a/arch/sparc/include/asm/byteorder.h
+++ b/arch/sparc/include/asm/byteorder.h
@@ -32,6 +32,7 @@
 
 #if defined(__GNUC__) && !defined(__STRICT_ANSI__)
 #define __BYTEORDER_HAS_U64__
+#define __SWAB_64_THRU_32__
 #endif
 #include <linux/byteorder/big_endian.h>
 #endif				/* _SPARC_BYTEORDER_H */
diff --git a/arch/sparc/include/asm/config.h b/arch/sparc/include/asm/config.h
index 6ddc349..7b6f30b 100644
--- a/arch/sparc/include/asm/config.h
+++ b/arch/sparc/include/asm/config.h
@@ -21,6 +21,8 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 
diff --git a/arch/sparc/include/asm/global_data.h b/arch/sparc/include/asm/global_data.h
index 7c1ac0d..9b14674 100644
--- a/arch/sparc/include/asm/global_data.h
+++ b/arch/sparc/include/asm/global_data.h
@@ -36,7 +36,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef struct global_data {
diff --git a/arch/sparc/include/asm/unaligned.h b/arch/sparc/include/asm/unaligned.h
new file mode 100644
index 0000000..0e646f7
--- /dev/null
+++ b/arch/sparc/include/asm/unaligned.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_SPARC_UNALIGNED_H
+#define _ASM_SPARC_UNALIGNED_H
+
+/*
+ * The SPARC can not do unaligned accesses, it must be split into multiple
+ * byte accesses. The SPARC is in big endian mode.
+ */
+#include <asm-generic/unaligned.h>
+
+#endif	/* _ASM_SPARC_UNALIGNED_H */
diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c
index 09bcdb0..ab31cfb 100644
--- a/arch/sparc/lib/board.c
+++ b/arch/sparc/lib/board.c
@@ -244,7 +244,7 @@ void board_init_f(ulong bootflag)
 	printf("CONFIG_SYS_PROM_OFFSET:        0x%lx (%d)\n", CONFIG_SYS_PROM_OFFSET,
 	       CONFIG_SYS_PROM_SIZE);
 	printf("CONFIG_SYS_GBL_DATA_OFFSET:    0x%lx (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET,
-	       CONFIG_SYS_GBL_DATA_SIZE);
+	       GENERATED_GBL_DATA_SIZE);
 #endif
 
 #ifdef CONFIG_POST
@@ -252,13 +252,13 @@ void board_init_f(ulong bootflag)
 	post_run(NULL, POST_ROM | post_bootmode_get(0));
 #endif
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 #if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
 	puts("AMBA:\n");