summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorMathieu J. Poirier <mathieu.poirier@linaro.org>2012-07-31 08:59:29 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-09-01 14:58:20 +0200
commit1e37322e5a2ff8b529d82a6c345d5e343f77a5fc (patch)
treef0394e8d7b35437047db3ce1bb10207d4102c88f /arch
parentb95f9ec7d88b2b2362fab39a66fdccb3d6be53d4 (diff)
downloadu-boot-imx-1e37322e5a2ff8b529d82a6c345d5e343f77a5fc.zip
u-boot-imx-1e37322e5a2ff8b529d82a6c345d5e343f77a5fc.tar.gz
u-boot-imx-1e37322e5a2ff8b529d82a6c345d5e343f77a5fc.tar.bz2
u8500: Moving processor-specific functions to cpu area.
Functions such as providing power to the MMC device and reading the processor version register should be in the cpu area for access by multiple u8500-based boards. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/cpu/armv7/u8500/cpu.c80
-rw-r--r--arch/arm/include/asm/arch-u8500/sys_proto.h1
2 files changed, 81 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/u8500/cpu.c b/arch/arm/cpu/armv7/u8500/cpu.c
index fece201..7126d94 100644
--- a/arch/arm/cpu/armv7/u8500/cpu.c
+++ b/arch/arm/cpu/armv7/u8500/cpu.c
@@ -28,6 +28,24 @@
#include <asm/io.h>
#include <asm/arch/prcmu.h>
#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+
+#include <asm/arch/hardware.h>
+
+#define CPUID_DB8500V1 0x411fc091
+#define ASICID_DB8500V11 0x008500A1
+
+static unsigned int read_asicid(void)
+{
+ unsigned int *address = (void *)U8500_BOOTROM_BASE
+ + U8500_BOOTROM_ASIC_ID_OFFSET;
+ return readl(address);
+}
+
+static int cpu_is_u8500v11(void)
+{
+ return read_asicid() == ASICID_DB8500V11;
+}
#ifdef CONFIG_ARCH_CPU_INIT
/*
@@ -41,3 +59,65 @@ int arch_cpu_init(void)
return 0;
}
#endif /* CONFIG_ARCH_CPU_INIT */
+
+#ifdef CONFIG_MMC
+
+#define LDO_VAUX3_MASK 0x3
+#define LDO_VAUX3_ENABLE 0x1
+#define VAUX3_VOLTAGE_2_9V 0xd
+
+#define AB8500_REGU_CTRL2 0x4
+#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A
+#define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421
+
+int u8500_mmc_power_init(void)
+{
+ int ret;
+ int val;
+
+ if (!cpu_is_u8500v11())
+ return 0;
+
+ /*
+ * On v1.1 HREF boards (HREF+), Vaux3 needs to be enabled for the SD
+ * card to work. This is done by enabling the regulators in the AB8500
+ * via PRCMU I2C transactions.
+ *
+ * This code is derived from the handling of AB8500_LDO_VAUX3 in
+ * ab8500_ldo_enable() and ab8500_ldo_disable() in Linux.
+ *
+ * Turn off and delay is required to have it work across soft reboots.
+ */
+
+ ret = prcmu_i2c_read(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG);
+ if (ret < 0)
+ goto out;
+
+ val = ret;
+
+ /* Turn off */
+ ret = prcmu_i2c_write(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG,
+ val & ~LDO_VAUX3_MASK);
+ if (ret < 0)
+ goto out;
+
+ udelay(10 * 1000);
+
+ /* Set the voltage to 2.9V */
+ ret = prcmu_i2c_write(AB8500_REGU_CTRL2,
+ AB8500_REGU_VRF1VAUX3_SEL_REG,
+ VAUX3_VOLTAGE_2_9V);
+ if (ret < 0)
+ goto out;
+
+ val = val & ~LDO_VAUX3_MASK;
+ val = val | LDO_VAUX3_ENABLE;
+
+ /* Turn on the supply */
+ ret = prcmu_i2c_write(AB8500_REGU_CTRL2,
+ AB8500_REGU_VRF1VAUX3_REGU_REG, val);
+
+out:
+ return ret;
+}
+#endif /* CONFIG_MMC */
diff --git a/arch/arm/include/asm/arch-u8500/sys_proto.h b/arch/arm/include/asm/arch-u8500/sys_proto.h
index bac5e79..a8ef9e5 100644
--- a/arch/arm/include/asm/arch-u8500/sys_proto.h
+++ b/arch/arm/include/asm/arch-u8500/sys_proto.h
@@ -23,5 +23,6 @@
#define _SYS_PROTO_H_
void gpio_init(void);
+int u8500_mmc_power_init(void);
#endif /* _SYS_PROTO_H_ */