summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorFabio Estevam <fabio.estevam@freescale.com>2012-10-15 05:37:15 +0000
committerStefano Babic <sbabic@denx.de>2012-10-17 18:09:34 +0200
commit758c3449451f20402af72fa0754a1ce32ba9af48 (patch)
tree7c7e97b827d8d02fb821f6fec2f3e2211aa0ec39 /arch
parent5676f598e7b62b0ed8f34c6dfb02940c0f66b84b (diff)
downloadu-boot-imx-758c3449451f20402af72fa0754a1ce32ba9af48.zip
u-boot-imx-758c3449451f20402af72fa0754a1ce32ba9af48.tar.gz
u-boot-imx-758c3449451f20402af72fa0754a1ce32ba9af48.tar.bz2
mx5: lowlevel_init.S: Split init_clock macro
init_clock is currently shared between mx51 and mx53 and it contains lots of ifdef's which makes it really hard to follow the code. Split the init_clock between mx51 and mx53 to allow easier readability. No functional changes are made. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/cpu/armv7/mx5/lowlevel_init.S95
1 files changed, 65 insertions, 30 deletions
diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index 529e35b..d0bab45 100644
--- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -162,9 +162,9 @@ setup_pll_func:
.endm
.macro init_clock
+#if defined (CONFIG_MX51)
ldr r0, =CCM_BASE_ADDR
-#if defined(CONFIG_MX51)
/* Gate of clocks to the peripherals first */
ldr r1, =0x3FFFFFFF
str r1, [r0, #CLKCTL_CCGR0]
@@ -190,21 +190,6 @@ setup_pll_func:
1: ldr r1, [r0, #CLKCTL_CDHIPR]
cmp r1, #0x0
bne 1b
-#else
- ldr r1, =0x3FFFFFFF
- str r1, [r0, #CLKCTL_CCGR0]
- str r4, [r0, #CLKCTL_CCGR1]
- str r4, [r0, #CLKCTL_CCGR2]
- str r4, [r0, #CLKCTL_CCGR3]
- str r4, [r0, #CLKCTL_CCGR7]
-
- ldr r1, =0x00030000
- str r1, [r0, #CLKCTL_CCGR4]
- ldr r1, =0x00FFF030
- str r1, [r0, #CLKCTL_CCGR5]
- ldr r1, =0x0F00030F
- str r1, [r0, #CLKCTL_CCGR6]
-#endif
/* Switch ARM to step clock */
mov r1, #0x4
@@ -217,7 +202,6 @@ setup_pll_func:
setup_pll PLL1_BASE_ADDR, 800
#endif
-#if defined(CONFIG_MX51)
setup_pll PLL3_BASE_ADDR, 665
/* Switch peripheral to PLL 3 */
@@ -234,7 +218,7 @@ setup_pll_func:
str r1, [r0, #CLKCTL_CBCDR]
ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL
str r1, [r0, #CLKCTL_CBCMR]
-#endif
+
setup_pll PLL3_BASE_ADDR, 216
/* Set the platform clock dividers */
@@ -244,21 +228,17 @@ setup_pll_func:
ldr r0, =CCM_BASE_ADDR
-#if defined(CONFIG_MX51)
/* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */
ldr r3, [r4, #ROM_SI_REV]
cmp r3, #0x10
movls r1, #0x1
movhi r1, #0
-#else
- mov r1, #0
-#endif
+
str r1, [r0, #CLKCTL_CACRR]
/* Switch ARM back to PLL 1 */
str r4, [r0, #CLKCTL_CCSR]
-#if defined(CONFIG_MX51)
/* setup the rest */
/* Use lp_apm (24MHz) source for perclk */
ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL
@@ -266,7 +246,6 @@ setup_pll_func:
/* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */
ldr r1, =CONFIG_SYS_CLKTL_CBCDR
str r1, [r0, #CLKCTL_CBCDR]
-#endif
/* Restore the default values in the Gate registers */
ldr r1, =0xFFFFFFFF
@@ -277,17 +256,72 @@ setup_pll_func:
str r1, [r0, #CLKCTL_CCGR4]
str r1, [r0, #CLKCTL_CCGR5]
str r1, [r0, #CLKCTL_CCGR6]
-#if defined(CONFIG_MX53)
- str r1, [r0, #CLKCTL_CCGR7]
-#endif
-#if defined(CONFIG_MX51)
/* Use PLL 2 for UART's, get 66.5MHz from it */
ldr r1, =0xA5A2A020
str r1, [r0, #CLKCTL_CSCMR1]
ldr r1, =0x00C30321
str r1, [r0, #CLKCTL_CSCDR1]
-#elif defined(CONFIG_MX53)
+ /* make sure divider effective */
+1: ldr r1, [r0, #CLKCTL_CDHIPR]
+ cmp r1, #0x0
+ bne 1b
+
+ str r4, [r0, #CLKCTL_CCDR]
+
+ /* for cko - for ARM div by 8 */
+ mov r1, #0x000A0000
+ add r1, r1, #0x00000F0
+ str r1, [r0, #CLKCTL_CCOSR]
+#else /* CONFIG_MX53 */
+ ldr r0, =CCM_BASE_ADDR
+
+ /* Gate of clocks to the peripherals first */
+ ldr r1, =0x3FFFFFFF
+ str r1, [r0, #CLKCTL_CCGR0]
+ str r4, [r0, #CLKCTL_CCGR1]
+ str r4, [r0, #CLKCTL_CCGR2]
+ str r4, [r0, #CLKCTL_CCGR3]
+ str r4, [r0, #CLKCTL_CCGR7]
+ ldr r1, =0x00030000
+ str r1, [r0, #CLKCTL_CCGR4]
+ ldr r1, =0x00FFF030
+ str r1, [r0, #CLKCTL_CCGR5]
+ ldr r1, =0x0F00030F
+ str r1, [r0, #CLKCTL_CCGR6]
+
+ /* Switch ARM to step clock */
+ mov r1, #0x4
+ str r1, [r0, #CLKCTL_CCSR]
+
+ setup_pll PLL1_BASE_ADDR, 800
+
+ setup_pll PLL3_BASE_ADDR, 216
+
+ /* Set the platform clock dividers */
+ ldr r0, =ARM_BASE_ADDR
+ ldr r1, =0x00000725
+ str r1, [r0, #0x14]
+
+ ldr r0, =CCM_BASE_ADDR
+
+ mov r1, #0
+ str r1, [r0, #CLKCTL_CACRR]
+
+ /* Switch ARM back to PLL 1 */
+ str r4, [r0, #CLKCTL_CCSR]
+
+ /* Restore the default values in the Gate registers */
+ ldr r1, =0xFFFFFFFF
+ str r1, [r0, #CLKCTL_CCGR0]
+ str r1, [r0, #CLKCTL_CCGR1]
+ str r1, [r0, #CLKCTL_CCGR2]
+ str r1, [r0, #CLKCTL_CCGR3]
+ str r1, [r0, #CLKCTL_CCGR4]
+ str r1, [r0, #CLKCTL_CCGR5]
+ str r1, [r0, #CLKCTL_CCGR6]
+ str r1, [r0, #CLKCTL_CCGR7]
+
/* Switch peripheral to PLL2 */
ldr r0, =CCM_BASE_ADDR
ldr r1, =0x00808145
@@ -306,7 +340,7 @@ setup_pll_func:
and r1, r1, #0xffffffc0
orr r1, r1, #0x0a
str r1, [r0, #CLKCTL_CSCDR1]
-#endif
+
/* make sure divider effective */
1: ldr r1, [r0, #CLKCTL_CDHIPR]
cmp r1, #0x0
@@ -318,6 +352,7 @@ setup_pll_func:
mov r1, #0x000A0000
add r1, r1, #0x00000F0
str r1, [r0, #CLKCTL_CCOSR]
+#endif /* CONFIG_MX53 */
.endm
.macro setup_wdog