MIPS: add dynamic relocation support

The code handles relocation entries with the
following relocation types only:
  mips32: R_MIPS_REL32
  mips64: R_MIPS_REL+R_MIPS_64
  xburst: R_MIPS_REL32

Other relocation entries are skipped without
processing. The code must be extended if other
relocation types must be supported.

Add -pie to LDFLAGS_FINAL to generate the .rel.dyn
fixup table, which will be applied to the relocated
image before transferring control to it.

The CONFIG_NEEDS_MANUAL_RELOC is not needed
after the patch, so remove that as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

6 files changed, 94 insertions, 12 deletions

diff --git a/arch/mips/config.mk b/arch/mips/config.mk
index de9140b..aaa94e8 100644
--- a/arch/mips/config.mk
+++ b/arch/mips/config.mk
@@ -65,4 +65,5 @@ PLATFORM_CPPFLAGS		+= -G 0 -mabicalls -fpic $(ENDIANNESS)
 PLATFORM_CPPFLAGS		+= -msoft-float
 PLATFORM_LDFLAGS		+= -G 0 -static -n -nostdlib $(ENDIANNESS)
 PLATFORM_RELFLAGS		+= -ffunction-sections -fdata-sections
-LDFLAGS_FINAL			+= --gc-sections
+LDFLAGS_FINAL			+= --gc-sections -pie
+OBJCFLAGS			+= --remove-section=.dynsym
diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S
index 649c0bb..76abbaa 100644
--- a/arch/mips/cpu/mips32/start.S
+++ b/arch/mips/cpu/mips32/start.S
@@ -201,6 +201,8 @@ relocate_code:
 	jr	t0
 	 nop
 
+	.word	__rel_dyn_end
+	.word	__rel_dyn_start
 	.word	__image_copy_end
 	.word	_GLOBAL_OFFSET_TABLE_
 	.word	num_got_entries
@@ -227,6 +229,32 @@ in_ram:
 	blt	t2, t3, 1b
 	 addi	t4, 4
 
+	/* Update dynamic relocations */
+	lw	t1, -16(t0)		# t1 <-- __rel_dyn_start
+	lw	t2, -20(t0)		# t2 <-- __rel_dyn_end
+
+	b	2f			# skip first reserved entry
+	 addi	t1, 8
+
+1:
+	lw	t3, -4(t1)		# t3 <-- relocation info
+
+	sub	t3, 3
+	bnez	t3, 2f			# skip non R_MIPS_REL32 entries
+	 nop
+
+	lw	t3, -8(t1)		# t3 <-- location to fix up in FLASH
+
+	lw	t4, 0(t3)		# t4 <-- original pointer
+	add	t4, s1			# t4 <-- adjusted pointer
+
+	add	t3, s1			# t3 <-- location to fix up in RAM
+	sw	t4, 0(t3)
+
+2:
+	blt	t1, t2, 1b
+	 addi	t1, 8			# each rel.dyn entry is 8 bytes
+
 	/*
 	 * Clear BSS
 	 *
diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S
index 5c2c7b5..dc7ce07 100644
--- a/arch/mips/cpu/mips64/start.S
+++ b/arch/mips/cpu/mips64/start.S
@@ -31,6 +31,14 @@
 #define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
 #endif
 
+#ifdef CONFIG_SYS_LITTLE_ENDIAN
+#define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
+	(((r_type) << 24) | ((r_type2) << 16) | ((r_type3) << 8) | (ssym))
+#else
+#define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
+	((r_type) | ((r_type2) << 8) | ((r_type3) << 16) | (ssym) << 24)
+#endif
+
 	/*
 	 * For the moment disable interrupts, mark the kernel mode and
 	 * set ST0_KX so that the CPU does not spit fire when using
@@ -193,6 +201,8 @@ relocate_code:
 	jr	t0
 	 nop
 
+	.dword	__rel_dyn_end
+	.dword	__rel_dyn_start
 	.dword	__image_copy_end
 	.dword	_GLOBAL_OFFSET_TABLE_
 	.dword	num_got_entries
@@ -219,6 +229,32 @@ in_ram:
 	blt	t2, t3, 1b
 	 daddi	t8, 8
 
+	/* Update dynamic relocations */
+	ld	t1, -32(t0)		# t1 <-- __rel_dyn_start
+	ld	t2, -40(t0)		# t2 <-- __rel_dyn_end
+
+	b	2f			# skip first reserved entry
+	 daddi	t1, 16
+
+1:
+	lw	t8, -4(t1)		# t8 <-- relocation info
+
+	dli	t3, MIPS64_R_INFO(0x00, 0x00, 0x12, 0x03)
+	bne	t8, t3, 2f		# skip non R_MIPS_REL32 entries
+	 nop
+
+	ld	t3, -16(t1)		# t3 <-- location to fix up in FLASH
+
+	ld	t8, 0(t3)		# t8 <-- original pointer
+	dadd	t8, s1			# t8 <-- adjusted pointer
+
+	dadd	t3, s1			# t3 <-- location to fix up in RAM
+	sd	t8, 0(t3)
+
+2:
+	blt	t1, t2, 1b
+	 daddi	t1, 16			# each rel.dyn entry is 16 bytes
+
 	/*
 	 * Clear BSS
 	 *
diff --git a/arch/mips/cpu/xburst/start.S b/arch/mips/cpu/xburst/start.S
index 6b30d3e..d2c064b 100644
--- a/arch/mips/cpu/xburst/start.S
+++ b/arch/mips/cpu/xburst/start.S
@@ -116,6 +116,8 @@ relocate_code:
 	jr	t0
 	 nop
 
+	.word	__rel_dyn_end
+	.word	__rel_dyn_start
 	.word	__image_copy_end
 	.word	_GLOBAL_OFFSET_TABLE_
 	.word	num_got_entries
@@ -142,6 +144,32 @@ in_ram:
 	blt	t2, t3, 1b
 	 addi	t4, 4
 
+	/* Update dynamic relocations */
+	lw	t1, -16(t0)		# t1 <-- __rel_dyn_start
+	lw	t2, -20(t0)		# t2 <-- __rel_dyn_end
+
+	b	2f			# skip first reserved entry
+	 addi	t1, 8
+
+1:
+	lw	t3, -4(t1)		# t3 <-- relocation info
+
+	sub	t3, 3
+	bnez	t3, 2f			# skip non R_MIPS_REL32 entries
+	 nop
+
+	lw	t3, -8(t1)		# t3 <-- location to fix up in FLASH
+
+	lw	t4, 0(t3)		# t4 <-- original pointer
+	add	t4, t6			# t4 <-- adjusted pointer
+
+	add	t3, t6			# t3 <-- location to fix up in RAM
+	sw	t4, 0(t3)
+
+2:
+	blt	t1, t2, 1b
+	 addi	t1, 8			# each rel.dyn entry is 8 bytes
+
 	/*
 	 * Clear BSS
 	 *
diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h
index 02fbfb3..049c44e 100644
--- a/arch/mips/include/asm/config.h
+++ b/arch/mips/include/asm/config.h
@@ -21,6 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-#define CONFIG_NEEDS_MANUAL_RELOC
-
 #endif
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
index d494876..2ec0f76 100644
--- a/arch/mips/lib/board.c
+++ b/arch/mips/lib/board.c
@@ -266,14 +266,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
 
 	serial_initialize();
 
-#if defined(CONFIG_NEEDS_MANUAL_RELOC)
-	/*
-	 * We have to relocate the command table manually
-	 */
-	fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
-			ll_entry_count(cmd_tbl_t, cmd));
-#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
-
 	/* there are some other pointer constants we must deal with */
 #ifndef CONFIG_ENV_IS_NOWHERE
 	env_name_spec += gd->reloc_off;
@@ -284,7 +276,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	/* The Malloc area is immediately below the monitor copy in DRAM */
 	mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
 			TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN);
-	malloc_bin_reloc();
 
 #ifndef CONFIG_SYS_NO_FLASH
 	/* configure available FLASH banks */