cosmetic: checkpatch cleanup of arch/x86/lib/*.c

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

15 files changed, 501 insertions, 432 deletions

diff --git a/arch/x86/lib/bios.h b/arch/x86/lib/bios.h
index 4a9cdb5..a220983 100644
--- a/arch/x86/lib/bios.h
+++ b/arch/x86/lib/bios.h
@@ -24,69 +24,150 @@
 #ifndef _BIOS_H_
 #define _BIOS_H_
 
-#define OFFS_ES      0     /* 16bit */
-#define OFFS_GS      2     /* 16bit */
-#define OFFS_DS      4     /* 16bit */
-#define OFFS_EDI     6     /* 32bit */
-#define OFFS_DI      6     /* low 16 bits of EDI */
-#define OFFS_ESI     10    /* 32bit */
-#define OFFS_SI      10    /* low 16 bits of ESI */
-#define OFFS_EBP     14    /* 32bit */
-#define OFFS_BP      14    /* low 16 bits of EBP */
-#define OFFS_ESP     18    /* 32bit */
-#define OFFS_SP      18    /* low 16 bits of ESP */
-#define OFFS_EBX     22    /* 32bit */
-#define OFFS_BX      22    /* low 16 bits of EBX */
-#define OFFS_BL      22    /* low  8 bits of BX */
-#define OFFS_BH      23    /* high 8 bits of BX */
-#define OFFS_EDX     26    /* 32bit */
-#define OFFS_DX      26    /* low 16 bits of EBX */
-#define OFFS_DL      26    /* low  8 bits of BX */
-#define OFFS_DH      27    /* high 8 bits of BX */
-#define OFFS_ECX     30    /* 32bit */
-#define OFFS_CX      30    /* low 16 bits of EBX */
-#define OFFS_CL      30    /* low  8 bits of BX */
-#define OFFS_CH      31    /* high 8 bits of BX */
-#define OFFS_EAX     34    /* 32bit */
-#define OFFS_AX      34    /* low 16 bits of EBX */
-#define OFFS_AL      34    /* low  8 bits of BX */
-#define OFFS_AH      35    /* high 8 bits of BX */
-#define OFFS_VECTOR  38    /* 16bit */
-#define OFFS_IP      40    /* 16bit */
-#define OFFS_CS      42    /* 16bit */
-#define OFFS_FLAGS   44    /* 16bit */
+#define OFFS_ES		0	/* 16bit */
+#define OFFS_GS		2	/* 16bit */
+#define OFFS_DS		4	/* 16bit */
+#define OFFS_EDI	6	/* 32bit */
+#define OFFS_DI		6	/* low 16 bits of EDI */
+#define OFFS_ESI	10	/* 32bit */
+#define OFFS_SI		10	/* low 16 bits of ESI */
+#define OFFS_EBP	14	/* 32bit */
+#define OFFS_BP		14	/* low 16 bits of EBP */
+#define OFFS_ESP	18	/* 32bit */
+#define OFFS_SP		18	/* low 16 bits of ESP */
+#define OFFS_EBX	22	/* 32bit */
+#define OFFS_BX		22	/* low 16 bits of EBX */
+#define OFFS_BL		22	/* low  8 bits of BX */
+#define OFFS_BH		23	/* high 8 bits of BX */
+#define OFFS_EDX	26	/* 32bit */
+#define OFFS_DX		26	/* low 16 bits of EBX */
+#define OFFS_DL		26	/* low  8 bits of BX */
+#define OFFS_DH		27	/* high 8 bits of BX */
+#define OFFS_ECX	30	/* 32bit */
+#define OFFS_CX		30	/* low 16 bits of EBX */
+#define OFFS_CL		30	/* low  8 bits of BX */
+#define OFFS_CH		31	/* high 8 bits of BX */
+#define OFFS_EAX	34	/* 32bit */
+#define OFFS_AX		34	/* low 16 bits of EBX */
+#define OFFS_AL		34	/* low  8 bits of BX */
+#define OFFS_AH		35	/* high 8 bits of BX */
+#define OFFS_VECTOR	38	/* 16bit */
+#define OFFS_IP		40	/* 16bit */
+#define OFFS_CS		42	/* 16bit */
+#define OFFS_FLAGS	44	/* 16bit */
 
-#define SEGMENT      0x40
-#define STACK	     0x800	/* stack at 0x40:0x800 -> 0x800 */
+/* stack at 0x40:0x800 -> 0x800 */
+#define SEGMENT		0x40
+#define STACK		0x800
 
-/* save general registers */
-/* save some segments     */
-/* save callers stack segment .. */
-/* ... in gs */
-	/* setup my segments */
-	/* setup BIOS stackpointer */
-
-#define MAKE_BIOS_STACK \
-	pushal; \
-	pushw	%ds; \
-	pushw	%gs; \
-	pushw	%es; \
-	pushw	%ss; \
-	popw	%gs; \
-	movw	$SEGMENT, %ax; \
-	movw	%ax, %ds; \
-	movw	%ax, %es; \
-	movw	%ax, %ss; \
-	movw	%sp, %bp; \
+/*
+ * save general registers
+ * save some segments
+ * save callers stack segment
+ * setup BIOS segments
+ * setup BIOS stackpointer
+ */
+#define MAKE_BIOS_STACK		\
+	pushal;			\
+	pushw	%ds;		\
+	pushw	%gs;		\
+	pushw	%es;		\
+	pushw	%ss;		\
+	popw	%gs;		\
+	movw	$SEGMENT, %ax;	\
+	movw	%ax, %ds;	\
+	movw	%ax, %es;	\
+	movw	%ax, %ss;	\
+	movw	%sp, %bp;	\
 	movw	$STACK, %sp
 
-#define RESTORE_CALLERS_STACK \
-	pushw	%gs;		/* restore callers stack segment */ \
-	popw	%ss; \
-	movw	%bp, %sp;	/* restore stackpointer */ \
-	popw	%es;		/* restore segment selectors */ \
-	popw	%gs; \
-	popw	%ds; \
-	popal			/* restore GP registers */
+/*
+ * restore callers stack segment
+ * restore some segments
+ * restore general registers
+ */
+#define RESTORE_CALLERS_STACK	\
+	pushw	%gs;		\
+	popw	%ss;		\
+	movw	%bp, %sp;	\
+	popw	%es;		\
+	popw	%gs;		\
+	popw	%ds;		\
+	popal
+
+#ifndef __ASSEMBLY__
+#define BIOS_DATA	((char *)0x400)
+#define BIOS_DATA_SIZE	256
+#define BIOS_BASE	((char *)0xf0000)
+#define BIOS_CS		0xf000
+
+extern ulong __bios_start;
+extern ulong __bios_size;
+
+/* these are defined in a 16bit segment and needs
+ * to be accessed with the RELOC_16_xxxx() macros below
+ */
+extern u16 ram_in_64kb_chunks;
+extern u16 bios_equipment;
+extern u8  pci_last_bus;
+
+extern void *rm_int00;
+extern void *rm_int01;
+extern void *rm_int02;
+extern void *rm_int03;
+extern void *rm_int04;
+extern void *rm_int05;
+extern void *rm_int06;
+extern void *rm_int07;
+extern void *rm_int08;
+extern void *rm_int09;
+extern void *rm_int0a;
+extern void *rm_int0b;
+extern void *rm_int0c;
+extern void *rm_int0d;
+extern void *rm_int0e;
+extern void *rm_int0f;
+extern void *rm_int10;
+extern void *rm_int11;
+extern void *rm_int12;
+extern void *rm_int13;
+extern void *rm_int14;
+extern void *rm_int15;
+extern void *rm_int16;
+extern void *rm_int17;
+extern void *rm_int18;
+extern void *rm_int19;
+extern void *rm_int1a;
+extern void *rm_int1b;
+extern void *rm_int1c;
+extern void *rm_int1d;
+extern void *rm_int1e;
+extern void *rm_int1f;
+extern void *rm_def_int;
+
+extern void *realmode_reset;
+extern void *realmode_pci_bios_call_entry;
+
+#define RELOC_16_LONG(seg, off) (*(u32 *)(seg << 4 | (u32)&off))
+#define RELOC_16_WORD(seg, off) (*(u16 *)(seg << 4 | (u32)&off))
+#define RELOC_16_BYTE(seg, off) (*(u8 *)(seg << 4 | (u32)&off))
+
+#ifdef PCI_BIOS_DEBUG
+extern u32 num_pci_bios_present;
+extern u32 num_pci_bios_find_device;
+extern u32 num_pci_bios_find_class;
+extern u32 num_pci_bios_generate_special_cycle;
+extern u32 num_pci_bios_read_cfg_byte;
+extern u32 num_pci_bios_read_cfg_word;
+extern u32 num_pci_bios_read_cfg_dword;
+extern u32 num_pci_bios_write_cfg_byte;
+extern u32 num_pci_bios_write_cfg_word;
+extern u32 num_pci_bios_write_cfg_dword;
+extern u32 num_pci_bios_get_irq_routing;
+extern u32 num_pci_bios_set_irq;
+extern u32 num_pci_bios_unknown_function;
+#endif
+
+#endif
 
 #endif
diff --git a/arch/x86/lib/bios_pci.S b/arch/x86/lib/bios_pci.S
index 53d2ea0..47c478b 100644
--- a/arch/x86/lib/bios_pci.S
+++ b/arch/x86/lib/bios_pci.S
@@ -80,11 +80,15 @@ cs	incl	num_pci_bios_present
 #endif
 	movl	$0x20494350, %eax
 gs	movl	%eax, OFFS_EDX(%bp)
+
+	/* We support cfg type 1 version 2.10 */
 	movb	$0x01, %al
-gs	movb	%al, OFFS_AL(%bp)	/* We support cfg type 1 */
-	movw	$0x0210, %ax            /* version 2.10 */
+gs	movb	%al, OFFS_AL(%bp)
+	movw	$0x0210, %ax
 gs	movw	%ax, OFFS_BX(%bp)
-cs	movb	pci_last_bus, %al       /* last bus number */
+
+	/* last bus number */
+cs	movb	pci_last_bus, %al
 gs	movb	%al, OFFS_CL(%bp)
 	jmp	clear_carry
 
@@ -97,16 +101,22 @@ cs	incl	num_pci_bios_find_device
 #endif
 gs	movw	OFFS_CX(%bp), %di
 	shll	$16, %edi
-gs	movw	OFFS_DX(%bp), %di       /* edi now holds device in upper 16
-					 * bits and vendor in lower 16 bits */
+gs	movw	OFFS_DX(%bp), %di
+	/* edi now holds device in upper 16 bits and vendor in lower 16 bits */
+
 gs	movw	OFFS_SI(%bp), %si
-	xorw	%bx, %bx                /* start at bus 0 dev 0 function 0 */
+
+	/* start at bus 0 dev 0 function 0 */
+	xorw	%bx, %bx
 pfd_loop:
-	xorw	%ax, %ax		/* dword 0 is vendor/device */
+	/* dword 0 is vendor/device */
+	xorw	%ax, %ax
 	call	__pci_bios_select_register
 	movw	$0xcfc, %dx
 	inl	%dx, %eax
-	cmpl	%edi, %eax		/* our device ? */
+
+	/* our device ? */
+	cmpl	%edi, %eax
 	je	pfd_found_one
 pfd_next_dev:
 	/* check for multi function devices */
@@ -120,13 +130,16 @@ pfd_next_dev:
 	andb	$0x80, %al
 	jz	pfd_not_multi_function
 pfd_function_not_zero:
-	incw	%bx			/* next function, overflows in to
-					 * device number, then bus number */
+	/* next function, overflows in to device number, then bus number */
+	incw	%bx
 	jmp	pfd_check_bus
 
 pfd_not_multi_function:
-	andw	$0xfff8, %bx            /* remove function bits */
-	addw	$0x0008, %bx            /* next device, overflows in to bus number */
+	/* remove function bits */
+	andw	$0xfff8, %bx
+
+	/* next device, overflows in to bus number */
+	addw	$0x0008, %bx
 pfd_check_bus:
 cs	movb	pci_last_bus, %ah
 	cmpb	%ah, %bh
@@ -142,7 +155,8 @@ gs	movw	%bx, OFFS_BX(%bp)
 	jmp	clear_carry
 
 pfd_not_found:
-	movb	$0x86, %ah              /* device not found */
+	/* device not found */
+	movb	$0x86, %ah
 	jmp	set_carry
 
 /*****************************************************************************/
@@ -152,17 +166,24 @@ pci_bios_find_class:
 cs	incl	num_pci_bios_find_class
 #endif
 gs	movl	OFFS_ECX(%bp), %edi
-	andl	$0x00ffffff, %edi       /* edi now holds class-code in lower 24 bits */
+
+	/* edi now holds class-code in lower 24 bits */
+	andl	$0x00ffffff, %edi
 gs	movw	OFFS_SI(%bp), %si
-	xorw	%bx, %bx                /* start at bus 0 dev 0 function 0 */
+
+	/* start at bus 0 dev 0 function 0 */
+	xorw	%bx, %bx
 pfc_loop:
-	movw	$8, %ax			/* dword 8 is class-code high 24bits */
+	/* dword 8 is class-code high 24bits */
+	movw	$8, %ax
 	call	__pci_bios_select_register
 	movw	$0xcfc, %dx
 	inl	%dx, %eax
 	shrl	$8, %eax
 	andl	$0x00ffffff, %eax
-	cmpl	%edi, %eax		/* our device ? */
+
+	/* our device ? */
+	cmpl	%edi, %eax
 	je	pfc_found_one
 pfc_next_dev:
 	/* check for multi function devices */
@@ -175,13 +196,16 @@ pfc_next_dev:
 	andb	$0x80, %al
 	jz	pfc_not_multi_function
 pfc_function_not_zero:
-	incw	%bx			/* next function, overflows in to
-					 * device number, then bus number */
+	/* next function, overflows in to device number, then bus number */
+	incw	%bx
 	jmp	pfc_check_bus
 
 pfc_not_multi_function:
-	andw	$0xfff8, %bx            /* remove function bits */
-	addw	$0x0008, %bx            /* next device, overflows in to bus number */
+	/* remove function bits */
+	andw	$0xfff8, %bx
+
+	/* next device, overflows in to bus number */
+	addw	$0x0008, %bx
 pfc_check_bus:
 cs	movb	pci_last_bus, %ah
 	cmpb	%ah, %bh
@@ -197,7 +221,8 @@ gs	movw	%bx, OFFS_BX(%bp)
 	jmp	clear_carry
 
 pfc_not_found:
-	movb	$0x86, %ah              /* device not found */
+	/* device not found */
+	movb	$0x86, %ah
 	jmp	set_carry
 
 /*****************************************************************************/
@@ -206,7 +231,8 @@ pci_bios_generate_special_cycle:
 #ifdef PCI_BIOS_DEBUG
 cs	incl	num_pci_bios_generate_special_cycle
 #endif
-	movb	$0x81, %ah              /* function not supported */
+	/* function not supported */
+	movb	$0x81, %ah
 	jmp	set_carry
 
 /*****************************************************************************/
@@ -296,7 +322,8 @@ pci_bios_get_irq_routing:
 #ifdef PCI_BIOS_DEBUG
 cs	incl	num_pci_bios_get_irq_routing
 #endif
-	movb	$0x81, %ah              /* function not supported */
+	/* function not supported */
+	movb	$0x81, %ah
 	jmp	set_carry
 
 /*****************************************************************************/
@@ -305,7 +332,8 @@ pci_bios_set_irq:
 #ifdef PCI_BIOS_DEBUG
 cs	incl	num_pci_bios_set_irq
 #endif
-	movb	$0x81, %ah              /* function not supported */
+	/* function not supported */
+	movb	$0x81, %ah
 	jmp	set_carry
 
 /*****************************************************************************/
@@ -314,7 +342,8 @@ unknown_function:
 #ifdef PCI_BIOS_DEBUG
 cs	incl	num_pci_bios_unknown_function
 #endif
-	movb	$0x81, %ah              /* function not supported */
+	/* function not supported */
+	movb	$0x81, %ah
 	jmp	set_carry
 
 /*****************************************************************************/
@@ -323,7 +352,8 @@ pci_bios_select_register:
 gs	movw	OFFS_BX(%bp), %bx
 gs	movw	OFFS_DI(%bp), %ax
 /* destroys eax, dx */
-__pci_bios_select_register:               /* BX holds device id, AX holds register index */
+__pci_bios_select_register:
+	/* BX holds device id, AX holds register index */
 	pushl	%ebx
 	andl	$0xfc, %eax
 	andl	$0xffff, %ebx
@@ -338,7 +368,9 @@ __pci_bios_select_register:               /* BX holds device id, AX holds regist
 
 clear_carry:
 gs	movw	OFFS_FLAGS(%bp), %ax
-	andw	$0xfffe, %ax			/* clear carry -- function succeeded */
+
+	/* clear carry -- function succeeded */
+	andw	$0xfffe, %ax
 gs	movw	%ax, OFFS_FLAGS(%bp)
 	xorw	%ax, %ax
 gs	movb	%ah, OFFS_AH(%bp)
@@ -347,7 +379,9 @@ gs	movb	%ah, OFFS_AH(%bp)
 set_carry:
 gs	movb	%ah, OFFS_AH(%bp)
 gs	movw	OFFS_FLAGS(%bp), %ax
-	orw	$1, %ax				/* return carry -- function not supported */
+
+	/* return carry -- function not supported */
+	orw	$1, %ax
 gs	movw	%ax, OFFS_FLAGS(%bp)
 	movw	$-1, %ax
 	ret
diff --git a/arch/x86/lib/bios_setup.c b/arch/x86/lib/bios_setup.c
index 9bf7e58..053280b 100644
--- a/arch/x86/lib/bios_setup.c
+++ b/arch/x86/lib/bios_setup.c
@@ -34,74 +34,22 @@
 #include <pci.h>
 #include <asm/realmode.h>
 #include <asm/io.h>
+#include "bios.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
 #define NUMVECTS	256
 
-#define BIOS_DATA        ((char*)0x400)
-#define BIOS_DATA_SIZE   256
-#define BIOS_BASE        ((char*)0xf0000)
-#define BIOS_CS          0xf000
-
-extern ulong __bios_start;
-extern ulong __bios_size;
-
-/* these are defined in a 16bit segment and needs
- * to be accessed with the RELOC_16_xxxx() macros below
- */
-extern u16 ram_in_64kb_chunks;
-extern u16 bios_equipment;
-extern u8  pci_last_bus;
-
-extern void *rm_int00;
-extern void *rm_int01;
-extern void *rm_int02;
-extern void *rm_int03;
-extern void *rm_int04;
-extern void *rm_int05;
-extern void *rm_int06;
-extern void *rm_int07;
-extern void *rm_int08;
-extern void *rm_int09;
-extern void *rm_int0a;
-extern void *rm_int0b;
-extern void *rm_int0c;
-extern void *rm_int0d;
-extern void *rm_int0e;
-extern void *rm_int0f;
-extern void *rm_int10;
-extern void *rm_int11;
-extern void *rm_int12;
-extern void *rm_int13;
-extern void *rm_int14;
-extern void *rm_int15;
-extern void *rm_int16;
-extern void *rm_int17;
-extern void *rm_int18;
-extern void *rm_int19;
-extern void *rm_int1a;
-extern void *rm_int1b;
-extern void *rm_int1c;
-extern void *rm_int1d;
-extern void *rm_int1e;
-extern void *rm_int1f;
-extern void *rm_def_int;
-
-extern void *realmode_reset;
-extern void *realmode_pci_bios_call_entry;
-
 static int set_jmp_vector(int entry_point, void *target)
 {
-	if (entry_point & ~0xffff) {
+	if (entry_point & ~0xffff)
 		return -1;
-	}
 
-	if (((u32)target-0xf0000) & ~0xffff) {
+	if (((u32)target - 0xf0000) & ~0xffff)
 		return -1;
-	}
+
 	printf("set_jmp_vector: 0xf000:%04x -> %p\n",
-	       entry_point, target);
+			entry_point, target);
 
 	/* jmp opcode */
 	writeb(0xea, 0xf0000 + entry_point);
@@ -115,51 +63,41 @@ static int set_jmp_vector(int entry_point, void *target)
 	return 0;
 }
 
-
-/*
- ************************************************************
- * Install an interrupt vector
- ************************************************************
- */
-
+/* Install an interrupt vector */
 static void setvector(int vector, u16 segment, void *handler)
 {
-	u16 *ptr = (u16*)(vector*4);
-	ptr[0] = ((u32)handler - (segment << 4))&0xffff;
+	u16 *ptr = (u16 *)(vector * 4);
+	ptr[0] = ((u32)handler - (segment << 4)) & 0xffff;
 	ptr[1] = segment;
 
 #if 0
 	printf("setvector: int%02x -> %04x:%04x\n",
-	       vector, ptr[1], ptr[0]);
+			vector, ptr[1], ptr[0]);
 #endif
 }
 
-#define RELOC_16_LONG(seg, off) *(u32*)(seg << 4 | (u32)&off)
-#define RELOC_16_WORD(seg, off) *(u16*)(seg << 4 | (u32)&off)
-#define RELOC_16_BYTE(seg, off) *(u8*)(seg << 4 | (u32)&off)
-
 int bios_setup(void)
 {
 	ulong bios_start = (ulong)&__bios_start + gd->reloc_off;
 	ulong bios_size = (ulong)&__bios_size;
 
-	static int done=0;
+	static int done;
 	int vector;
 #ifdef CONFIG_PCI
 	struct pci_controller *pri_hose;
 #endif
-	if (done) {
+	if (done)
 		return 0;
-	}
+
 	done = 1;
 
 	if (bios_size > 65536) {
 		printf("BIOS too large (%ld bytes, max is 65536)\n",
-		       bios_size);
+				bios_size);
 		return -1;
 	}
 
-	memcpy(BIOS_BASE, (void*)bios_start, bios_size);
+	memcpy(BIOS_BASE, (void *)bios_start, bios_size);
 
 	/* clear bda */
 	memset(BIOS_DATA, 0, BIOS_DATA_SIZE);
@@ -178,9 +116,8 @@ int bios_setup(void)
 
 
 	/* setup realmode interrupt vectors */
-	for (vector = 0; vector < NUMVECTS; vector++) {
+	for (vector = 0; vector < NUMVECTS; vector++)
 		setvector(vector, BIOS_CS, &rm_def_int);
-	}
 
 	setvector(0x00, BIOS_CS, &rm_int00);
 	setvector(0x01, BIOS_CS, &rm_int01);
diff --git a/arch/x86/lib/board.c b/arch/x86/lib/board.c
index 8963580..e8227b1 100644
--- a/arch/x86/lib/board.c
+++ b/arch/x86/lib/board.c
@@ -56,15 +56,6 @@
 #define XTRN_DECLARE_GLOBAL_DATA_PTR	/* empty = allocate here */
 DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_GD_ADDR);
 
-
-/* Exports from the Linker Script */
-extern ulong __text_start;
-extern ulong __data_end;
-extern ulong __rel_dyn_start;
-extern ulong __rel_dyn_end;
-extern ulong __bss_start;
-extern ulong __bss_end;
-
 /************************************************************************
  * Init Utilities							*
  ************************************************************************
@@ -72,48 +63,38 @@ extern ulong __bss_end;
  * or dropped completely,
  * but let's get it working (again) first...
  */
-static int init_baudrate (void)
+static int init_baudrate(void)
 {
 	gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
 	return 0;
 }
 
-static int display_banner (void)
+static int display_banner(void)
 {
 
-	printf ("\n\n%s\n\n", version_string);
-/*
-	printf ("U-Boot code: %08lX -> %08lX  data: %08lX -> %08lX\n"
-		"        BSS: %08lX -> %08lX stack: %08lX -> %08lX\n",
-		i386boot_start, i386boot_romdata_start-1,
-		i386boot_romdata_dest, i386boot_romdata_dest+i386boot_romdata_size-1,
-		i386boot_bss_start, i386boot_bss_start+i386boot_bss_size-1,
-		i386boot_bss_start+i386boot_bss_size,
-		i386boot_bss_start+i386boot_bss_size+CONFIG_SYS_STACK_SIZE-1);
-
-*/
+	printf("\n\n%s\n\n", version_string);
 
-	return (0);
+	return 0;
 }
 
-static int display_dram_config (void)
+static int display_dram_config(void)
 {
 	int i;
 
-	puts ("DRAM Configuration:\n");
+	puts("DRAM Configuration:\n");
 
-	for (i=0; i<CONFIG_NR_DRAM_BANKS; i++) {
-		printf ("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
-		print_size (gd->bd->bi_dram[i].size, "\n");
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
+		print_size(gd->bd->bi_dram[i].size, "\n");
 	}
 
-	return (0);
+	return 0;
 }
 
-static void display_flash_config (ulong size)
+static void display_flash_config(ulong size)
 {
-	puts ("Flash: ");
-	print_size (size, "\n");
+	puts("Flash: ");
+	print_size(size, "\n");
 }
 
 /*
@@ -214,7 +195,7 @@ static int clear_bss(void)
 	void *bss_end = &__bss_end;
 
 	ulong *dst_addr = (ulong *)(bss_start + gd->reloc_off);
-	ulong *end_addr = (ulong *)(bss_end + gd->reloc_off);;
+	ulong *end_addr = (ulong *)(bss_end + gd->reloc_off);
 
 	while (dst_addr < end_addr)
 		*dst_addr++ = 0x00000000;
@@ -227,10 +208,23 @@ static int do_elf_reloc_fixups(void)
 	Elf32_Rel *re_src = (Elf32_Rel *)(&__rel_dyn_start);
 	Elf32_Rel *re_end = (Elf32_Rel *)(&__rel_dyn_end);
 
+	Elf32_Addr *offset_ptr_rom;
+	Elf32_Addr *offset_ptr_ram;
+
 	do {
-		if (re_src->r_offset >= CONFIG_SYS_TEXT_BASE)
-			if (*(Elf32_Addr *)(re_src->r_offset + gd->reloc_off) >= CONFIG_SYS_TEXT_BASE)
-				*(Elf32_Addr *)(re_src->r_offset + gd->reloc_off) += gd->reloc_off;
+		/* Get the location from the relocation entry */
+		offset_ptr_rom = (Elf32_Addr *)re_src->r_offset;
+
+		/* Check that the location of the relocation is in .text */
+		if (offset_ptr_rom >= (Elf32_Addr *)CONFIG_SYS_TEXT_BASE) {
+
+			/* Switch to the in-RAM version */
+			offset_ptr_ram = offset_ptr_rom + gd->reloc_off;
+
+			/* Check that the target points into .text */
+			if (*offset_ptr_ram >= CONFIG_SYS_TEXT_BASE)
+				*offset_ptr_ram += gd->reloc_off;
+		}
 	} while (re_src++ < re_end);
 
 	return 0;
@@ -254,7 +248,8 @@ void board_init_f(ulong boot_flags)
 	relocate_code(gd->start_addr_sp, gd, gd->relocaddr);
 
 	/* NOTREACHED - relocate_code() does not return */
-	while(1);
+	while (1)
+		;
 }
 
 void board_init_r(gd_t *id, ulong dest_addr)
@@ -272,10 +267,10 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	memcpy(gd, id, sizeof(gd_t));
 
 	/* compiler optimization barrier needed for GCC >= 3.4 */
-	__asm__ __volatile__("": : :"memory");
+	__asm__ __volatile__("" : : : "memory");
 
 	gd->bd = &bd_data;
-	memset (gd->bd, 0, sizeof (bd_t));
+	memset(gd->bd, 0, sizeof(bd_t));
 	show_boot_progress(0x22);
 
 	gd->baudrate =  CONFIG_BAUDRATE;
@@ -285,7 +280,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 
 	for (init_fnc_ptr = init_sequence_r; *init_fnc_ptr; ++init_fnc_ptr) {
 		if ((*init_fnc_ptr)() != 0)
-			hang ();
+			hang();
 	}
 	show_boot_progress(0x23);
 
@@ -300,13 +295,13 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	show_boot_progress(0x25);
 
 	/* initialize environment */
-	env_relocate ();
+	env_relocate();
 	show_boot_progress(0x26);
 
 
 #ifdef CONFIG_CMD_NET
 	/* IP Address */
-	bd_data.bi_ip_addr = getenv_IPaddr ("ipaddr");
+	bd_data.bi_ip_addr = getenv_IPaddr("ipaddr");
 #endif
 
 #if defined(CONFIG_PCI)
@@ -319,9 +314,9 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	show_boot_progress(0x27);
 
 
-	stdio_init ();
+	stdio_init();
 
-	jumptable_init ();
+	jumptable_init();
 
 	/* Initialize the console (after the relocation and devices init) */
 	console_init_r();
@@ -333,7 +328,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 
 #if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
 	WATCHDOG_RESET();
-	puts ("PCMCIA:");
+	puts("PCMCIA:");
 	pcmcia_init();
 #endif
 
@@ -348,7 +343,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	show_boot_progress(0x28);
 
 #ifdef CONFIG_STATUS_LED
-	status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
+	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
 #endif
 
 	udelay(20);
@@ -356,9 +351,10 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	/* Initialize from environment */
 	load_addr = getenv_ulong("loadaddr", 16, load_addr);
 #if defined(CONFIG_CMD_NET)
-	if ((s = getenv ("bootfile")) != NULL) {
-		copy_filename (BootFile, s, sizeof (BootFile));
-	}
+	s = getenv("bootfile");
+
+	if (s != NULL)
+		copy_filename(BootFile, s, sizeof(BootFile));
 #endif
 
 	WATCHDOG_RESET();
@@ -390,10 +386,10 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	eth_initialize(gd->bd);
 #endif
 
-#if ( defined(CONFIG_CMD_NET)) && (0)
+#if (defined(CONFIG_CMD_NET)) && (0)
 	WATCHDOG_RESET();
 # ifdef DEBUG
-	puts ("Reset Ethernet PHY\n");
+	puts("Reset Ethernet PHY\n");
 # endif
 	reset_phy();
 #endif
@@ -410,27 +406,27 @@ void board_init_r(gd_t *id, ulong dest_addr)
 
 
 #ifdef CONFIG_POST
-	post_run (NULL, POST_RAM | post_bootmode_get(0));
+	post_run(NULL, POST_RAM | post_bootmode_get(0));
 #endif
 
-
 	show_boot_progress(0x29);
 
 	/* main_loop() can return to retry autoboot, if so just run it again. */
-	for (;;) {
+	for (;;)
 		main_loop();
-	}
 
 	/* NOTREACHED - no way out of command loop except booting */
 }
 
-void hang (void)
+void hang(void)
 {
-	puts ("### ERROR ### Please RESET the board ###\n");
-	for (;;);
+	puts("### ERROR ### Please RESET the board ###\n");
+	for (;;)
+		;
 }
 
-unsigned long do_go_exec (ulong (*entry)(int, char * const []), int argc, char * const argv[])
+unsigned long do_go_exec(ulong (*entry)(int, char * const []),
+			 int argc, char * const argv[])
 {
 	unsigned long ret = 0;
 	char **argv_tmp;
diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c
index a21a21f..836803c 100644
--- a/arch/x86/lib/bootm.c
+++ b/arch/x86/lib/bootm.c
@@ -32,7 +32,8 @@
 #include <asm/zimage.h>
 
 /*cmd_boot.c*/
-int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
+int do_bootm_linux(int flag, int argc, char * const argv[],
+		bootm_headers_t *images)
 {
 	void		*base_ptr;
 	ulong		os_data, os_len;
@@ -48,41 +49,41 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 
 	if (images->legacy_hdr_valid) {
 		hdr = images->legacy_hdr_os;
-		if (image_check_type (hdr, IH_TYPE_MULTI)) {
+		if (image_check_type(hdr, IH_TYPE_MULTI)) {
 			/* if multi-part image, we need to get first subimage */
-			image_multi_getimg (hdr, 0, &os_data, &os_len);
+			image_multi_getimg(hdr, 0, &os_data, &os_len);
 		} else {
 			/* otherwise get image data */
-			os_data = image_get_data (hdr);
-			os_len = image_get_data_size (hdr);
+			os_data = image_get_data(hdr);
+			os_len = image_get_data_size(hdr);
 		}
 #if defined(CONFIG_FIT)
 	} else if (images->fit_uname_os) {
-		ret = fit_image_get_data (images->fit_hdr_os,
+		ret = fit_image_get_data(images->fit_hdr_os,
 					images->fit_noffset_os, &data, &len);
 		if (ret) {
-			puts ("Can't get image data/size!\n");
+			puts("Can't get image data/size!\n");
 			goto error;
 		}
 		os_data = (ulong)data;
 		os_len = (ulong)len;
 #endif
 	} else {
-		puts ("Could not find kernel image!\n");
+		puts("Could not find kernel image!\n");
 		goto error;
 	}
 
-	base_ptr = load_zimage ((void*)os_data, os_len,
+	base_ptr = load_zimage((void *)os_data, os_len,
 			images->rd_start, images->rd_end - images->rd_start, 0);
 
 	if (NULL == base_ptr) {
-		printf ("## Kernel loading failed ...\n");
+		printf("## Kernel loading failed ...\n");
 		goto error;
 
 	}
 
 #ifdef DEBUG
-	printf ("## Transferring control to Linux (at address %08x) ...\n",
+	printf("## Transferring control to Linux (at address %08x) ...\n",
 		(u32)base_ptr);
 #endif
 
diff --git a/arch/x86/lib/interrupts.c b/arch/x86/lib/interrupts.c
index 04a9c79..76fbe9d 100644
--- a/arch/x86/lib/interrupts.c
+++ b/arch/x86/lib/interrupts.c
@@ -56,8 +56,8 @@ struct irq_action {
 };
 
 static struct irq_action irq_handlers[CONFIG_SYS_NUM_IRQS] = { {0} };
-static int spurious_irq_cnt = 0;
-static int spurious_irq = 0;
+static int spurious_irq_cnt;
+static int spurious_irq;
 
 void irq_install_handler(int irq, interrupt_handler_t *handler, void *arg)
 {
@@ -70,10 +70,10 @@ void irq_install_handler(int irq, interrupt_handler_t *handler, void *arg)
 
 	if (irq_handlers[irq].handler != NULL)
 		printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
-		       (ulong) handler,
-		       (ulong) irq_handlers[irq].handler);
+				(ulong) handler,
+				(ulong) irq_handlers[irq].handler);
 
-	status = disable_interrupts ();
+	status = disable_interrupts();
 
 	irq_handlers[irq].handler = handler;
 	irq_handlers[irq].arg = arg;
@@ -96,7 +96,7 @@ void irq_free_handler(int irq)
 		return;
 	}
 
-	status = disable_interrupts ();
+	status = disable_interrupts();
 
 	mask_irq(irq);
 
@@ -141,14 +141,14 @@ int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	int irq;
 
 	printf("Spurious IRQ: %u, last unknown IRQ: %d\n",
-	       spurious_irq_cnt, spurious_irq);
+			spurious_irq_cnt, spurious_irq);
 
-	printf ("Interrupt-Information:\n");
-	printf ("Nr  Routine   Arg       Count\n");
+	printf("Interrupt-Information:\n");
+	printf("Nr  Routine   Arg       Count\n");
 
 	for (irq = 0; irq <= CONFIG_SYS_NUM_IRQS; irq++) {
 		if (irq_handlers[irq].handler != NULL) {
-			printf ("%02d  %08lx  %08lx  %d\n",
+			printf("%02d  %08lx  %08lx  %d\n",
 					irq,
 					(ulong)irq_handlers[irq].handler,
 					(ulong)irq_handlers[irq].arg,
diff --git a/arch/x86/lib/pcat_interrupts.c b/arch/x86/lib/pcat_interrupts.c
index 2caae20..5dac498 100644
--- a/arch/x86/lib/pcat_interrupts.c
+++ b/arch/x86/lib/pcat_interrupts.c
@@ -76,7 +76,7 @@ int interrupt_init(void)
 	 * Enable cascaded interrupts by unmasking the cascade IRQ pin of
 	 * the master PIC
 	 */
-	unmask_irq (2);
+	unmask_irq(2);
 
 	enable_interrupts();
 
diff --git a/arch/x86/lib/pcat_timer.c b/arch/x86/lib/pcat_timer.c
index f2a5422..6b3db69 100644
--- a/arch/x86/lib/pcat_timer.c
+++ b/arch/x86/lib/pcat_timer.c
@@ -30,7 +30,7 @@
 #define TIMER0_VALUE 0x04aa /* 1kHz 1.9318MHz / 1000 */
 #define TIMER2_VALUE 0x0a8e /* 440Hz */
 
-static int timer_init_done = 0;
+static int timer_init_done;
 
 int timer_init(void)
 {
@@ -42,18 +42,18 @@ int timer_init(void)
 	 * (to stasrt a beep: write 3 to port 0x61,
 	 * to stop it again: write 0)
 	 */
-	outb (PIT_CMD_CTR0 | PIT_CMD_BOTH | PIT_CMD_MODE2,
-	      PIT_BASE + PIT_COMMAND);
-	outb (TIMER0_VALUE & 0xff, PIT_BASE + PIT_T0);
-	outb (TIMER0_VALUE >> 8, PIT_BASE + PIT_T0);
+	outb(PIT_CMD_CTR0 | PIT_CMD_BOTH | PIT_CMD_MODE2,
+			PIT_BASE + PIT_COMMAND);
+	outb(TIMER0_VALUE & 0xff, PIT_BASE + PIT_T0);
+	outb(TIMER0_VALUE >> 8, PIT_BASE + PIT_T0);
 
-	outb (PIT_CMD_CTR2 | PIT_CMD_BOTH | PIT_CMD_MODE3,
-	      PIT_BASE + PIT_COMMAND);
-	outb (TIMER2_VALUE & 0xff, PIT_BASE + PIT_T2);
-	outb (TIMER2_VALUE >> 8, PIT_BASE + PIT_T2);
+	outb(PIT_CMD_CTR2 | PIT_CMD_BOTH | PIT_CMD_MODE3,
+			PIT_BASE + PIT_COMMAND);
+	outb(TIMER2_VALUE & 0xff, PIT_BASE + PIT_T2);
+	outb(TIMER2_VALUE >> 8, PIT_BASE + PIT_T2);
 
-	irq_install_handler (0, timer_isr, NULL);
-	unmask_irq (0);
+	irq_install_handler(0, timer_isr, NULL);
+	unmask_irq(0);
 
 	timer_init_done = 1;
 
@@ -64,21 +64,20 @@ static u16 read_pit(void)
 {
 	u8 low;
 
-	outb (PIT_CMD_LATCH, PIT_BASE + PIT_COMMAND);
-	low = inb (PIT_BASE + PIT_T0);
+	outb(PIT_CMD_LATCH, PIT_BASE + PIT_COMMAND);
+	low = inb(PIT_BASE + PIT_T0);
 
-	return ((inb (PIT_BASE + PIT_T0) << 8) | low);
+	return (inb(PIT_BASE + PIT_T0) << 8) | low;
 }
 
 /* this is not very exact */
-void __udelay (unsigned long usec)
+void __udelay(unsigned long usec)
 {
 	int counter;
 	int wraps;
 
-	if (timer_init_done)
-	{
-		counter = read_pit ();
+	if (timer_init_done) {
+		counter = read_pit();
 		wraps = usec / 1000;
 		usec = usec % 1000;
 
@@ -92,7 +91,7 @@ void __udelay (unsigned long usec)
 		}
 
 		while (1) {
-			int new_count = read_pit ();
+			int new_count = read_pit();
 
 			if (((new_count < usec) && !wraps) || wraps < 0)
 				break;
diff --git a/arch/x86/lib/pci.c b/arch/x86/lib/pci.c
index 593a7db..f3018b7 100644
--- a/arch/x86/lib/pci.c
+++ b/arch/x86/lib/pci.c
@@ -42,11 +42,13 @@ int pci_shadow_rom(pci_dev_t dev, unsigned char *dest)
 	u16 device;
 	u32 class_code;
 
+	u32 pci_data;
+
 	hose = pci_bus_to_hose(PCI_BUS(dev));
-#if 0
-	printf("pci_shadow_rom() asked to shadow device %x to %x\n",
+
+	debug("pci_shadow_rom() asked to shadow device %x to %x\n",
 	       dev, (u32)dest);
-#endif
+
 	pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
 	pci_read_config_word(dev, PCI_DEVICE_ID, &device);
 	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_code);
@@ -67,7 +69,7 @@ int pci_shadow_rom(pci_dev_t dev, unsigned char *dest)
 		return -1;
 	}
 
-	size = (~(addr_reg&PCI_ROM_ADDRESS_MASK))+1;
+	size = (~(addr_reg&PCI_ROM_ADDRESS_MASK)) + 1;
 
 	debug("ROM is %d bytes\n", size);
 
@@ -80,27 +82,25 @@ int pci_shadow_rom(pci_dev_t dev, unsigned char *dest)
 			       |PCI_ROM_ADDRESS_ENABLE);
 
 
-	for (i=rom_addr;i<rom_addr+size; i+=512) {
-
-
+	for (i = rom_addr; i < rom_addr + size; i += 512) {
 		if (readw(i) == 0xaa55) {
-			u32 pci_data;
 #ifdef PCI_ROM_SCAN_VERBOSE
 			printf("ROM signature found\n");
 #endif
-			pci_data = readw(0x18+i);
+			pci_data = readw(0x18 + i);
 			pci_data += i;
 
-			if (0==memcmp((void*)pci_data, "PCIR", 4)) {
+			if (0 == memcmp((void *)pci_data, "PCIR", 4)) {
 #ifdef PCI_ROM_SCAN_VERBOSE
-				printf("Fount PCI rom image at offset %d\n", i-rom_addr);
+				printf("Fount PCI rom image at offset %d\n",
+				       i - rom_addr);
 				printf("Vendor %04x device %04x class %06x\n",
-				       readw(pci_data+4), readw(pci_data+6),
-				       readl(pci_data+0x0d)&0xffffff);
+				       readw(pci_data + 4), readw(pci_data + 6),
+				       readl(pci_data + 0x0d) & 0xffffff);
 				printf("%s\n",
-				       (readw(pci_data+0x15) &0x80)?
-				       "Last image":"More images follow");
-				switch	(readb(pci_data+0x14)) {
+				       (readw(pci_data + 0x15) & 0x80) ?
+				       "Last image" : "More images follow");
+				switch	(readb(pci_data + 0x14)) {
 				case 0:
 					printf("X86 code\n");
 					break;
@@ -111,35 +111,38 @@ int pci_shadow_rom(pci_dev_t dev, unsigned char *dest)
 					printf("PARISC code\n");
 					break;
 				}
-				printf("Image size %d\n", readw(pci_data+0x10) * 512);
+				printf("Image size %d\n",
+				       readw(pci_data + 0x10) * 512);
 #endif
-				/* FixMe: I think we should compare the class code
-				 * bytes as well but I have no reference on the
-				 * exact order of these bytes in the PCI ROM header */
-				if (readw(pci_data+4) == vendor &&
-				    readw(pci_data+6) == device &&
-				    /* (readl(pci_data+0x0d)&0xffffff) == class_code && */
-				    readb(pci_data+0x14) == 0 /* x86 code image */ ) {
+				/*
+				 * FixMe: I think we should compare the class
+				 * code bytes as well but I have no reference
+				 * on the exact order of these bytes in the PCI
+				 * ROM header
+				 */
+				if (readw(pci_data + 4) == vendor &&
+				    readw(pci_data + 6) == device &&
+				    readb(pci_data + 0x14) == 0) {
 #ifdef PCI_ROM_SCAN_VERBOSE
-					printf("Suitable ROM image found, copying\n");
+					printf("Suitable ROM image found\n");
 #endif
-					memmove(dest, (void*)rom_addr, readw(pci_data+0x10) * 512);
+					memmove(dest, (void *)rom_addr,
+						readw(pci_data + 0x10) * 512);
 					res = 0;
 					break;
 
 				}
-				if (readw(pci_data+0x15) &0x80) {
+
+				if (readw(pci_data + 0x15) & 0x80)
 					break;
-				}
 			}
 		}
 
 	}
 
 #ifdef PCI_ROM_SCAN_VERBOSE
-	if (res) {
+	if (res)
 		printf("No suitable image found\n");
-	}
 #endif
 	/* disable PAR register and PCI device ROM address devocer */
 	pci_remove_rom_window(hose, rom_addr);
diff --git a/arch/x86/lib/pci_type1.c b/arch/x86/lib/pci_type1.c
index da1d356..6fc4df4 100644
--- a/arch/x86/lib/pci_type1.c
+++ b/arch/x86/lib/pci_type1.c
@@ -29,7 +29,7 @@
 #include <asm/io.h>
 #include <pci.h>
 
-#define cfg_read(val, addr, op)	*val = op((int)(addr))
+#define cfg_read(val, addr, op)		(*val = op((int)(addr)))
 #define cfg_write(val, addr, op)	op((val), (int)(addr))
 
 #define TYPE1_PCI_OP(rw, size, type, op, mask)				\
@@ -42,7 +42,6 @@ type1_##rw##_config_##size(struct pci_controller *hose,			\
 	return 0;							\
 }
 
-
 TYPE1_PCI_OP(read, byte, u8 *, inb, 3)
 TYPE1_PCI_OP(read, word, u16 *, inw, 2)
 TYPE1_PCI_OP(read, dword, u32 *, inl, 0)
@@ -51,7 +50,7 @@ TYPE1_PCI_OP(write, byte, u8, outb, 3)
 TYPE1_PCI_OP(write, word, u16, outw, 2)
 TYPE1_PCI_OP(write, dword, u32, outl, 0)
 
-void pci_setup_type1(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
+void pci_setup_type1(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
 {
 	pci_set_ops(hose,
 		    type1_read_config_byte,
@@ -61,6 +60,6 @@ void pci_setup_type1(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
 		    type1_write_config_word,
 		    type1_write_config_dword);
 
-	hose->cfg_addr = (unsigned int *) cfg_addr;
-	hose->cfg_data = (unsigned char *) cfg_data;
+	hose->cfg_addr = (unsigned int *)cfg_addr;
+	hose->cfg_data = (unsigned char *)cfg_data;
 }
diff --git a/arch/x86/lib/realmode.c b/arch/x86/lib/realmode.c
index 6aa0f23..5a525ee 100644
--- a/arch/x86/lib/realmode.c
+++ b/arch/x86/lib/realmode.c
@@ -26,11 +26,7 @@
 #include <asm/ptrace.h>
 #include <asm/realmode.h>
 
-#define REALMODE_MAILBOX ((char*)0xe00)
-
-extern ulong __realmode_start;
-extern ulong __realmode_size;
-extern char realmode_enter;
+#define REALMODE_MAILBOX ((char *)0xe00)
 
 int realmode_setup(void)
 {
@@ -63,15 +59,14 @@ int enter_realmode(u16 seg, u16 off, struct pt_regs *in, struct pt_regs *out)
 
 	in->eip = off;
 	in->xcs = seg;
-	if (3>(in->esp & 0xffff)) {
+	if ((in->esp & 0xffff) < 4)
 		printf("Warning: entering realmode with sp < 4 will fail\n");
-	}
 
 	memcpy(REALMODE_MAILBOX, in, sizeof(struct pt_regs));
 	asm("wbinvd\n");
 
 	__asm__ volatile (
-		 "lcall $0x20,%0\n"  : :  "i" (&realmode_enter) );
+		 "lcall $0x20,%0\n" : : "i" (&realmode_enter));
 
 	asm("wbinvd\n");
 	memcpy(out, REALMODE_MAILBOX, sizeof(struct pt_regs));
@@ -79,9 +74,10 @@ int enter_realmode(u16 seg, u16 off, struct pt_regs *in, struct pt_regs *out)
 	return out->eax;
 }
 
-
-/* This code is supposed to access a realmode interrupt
- * it does currently not work for me */
+/*
+ * This code is supposed to access a realmode interrupt
+ * it does currently not work for me
+ */
 int enter_realmode_int(u8 lvl, struct pt_regs *in, struct pt_regs *out)
 {
 	/* place two instructions at 0x700 */
@@ -92,5 +88,5 @@ int enter_realmode_int(u8 lvl, struct pt_regs *in, struct pt_regs *out)
 
 	enter_realmode(0x00, 0x700, in, out);
 
-	return out->eflags&1;
+	return out->eflags & 0x00000001;
 }
diff --git a/arch/x86/lib/timer.c b/arch/x86/lib/timer.c
index 8b1bde7..fd7032e 100644
--- a/arch/x86/lib/timer.c
+++ b/arch/x86/lib/timer.c
@@ -35,15 +35,15 @@ struct timer_isr_function {
 	timer_fnc_t *isr_func;
 };
 
-static struct timer_isr_function *first_timer_isr = NULL;
-static volatile unsigned long system_ticks = 0;
+static struct timer_isr_function *first_timer_isr;
+static unsigned long system_ticks;
 
 /*
  * register_timer_isr() allows multiple architecture and board specific
  * functions to be called every millisecond. Keep the execution time of
  * each function as low as possible
  */
-int register_timer_isr (timer_fnc_t *isr_func)
+int register_timer_isr(timer_fnc_t *isr_func)
 {
 	struct timer_isr_function *new_func;
 	struct timer_isr_function *temp;
@@ -61,7 +61,7 @@ int register_timer_isr (timer_fnc_t *isr_func)
 	 *  Don't allow timer interrupts while the
 	 *  linked list is being modified
 	 */
-	flag = disable_interrupts ();
+	flag = disable_interrupts();
 
 	if (first_timer_isr == NULL) {
 		first_timer_isr = new_func;
@@ -73,7 +73,7 @@ int register_timer_isr (timer_fnc_t *isr_func)
 	}
 
 	if (flag)
-		enable_interrupts ();
+		enable_interrupts();
 
 	return 0;
 }
@@ -89,12 +89,12 @@ void timer_isr(void *unused)
 
 	/* Execute each registered function */
 	while (temp != NULL) {
-		temp->isr_func ();
+		temp->isr_func();
 		temp = temp->next;
 	}
 }
 
-ulong get_timer (ulong base)
+ulong get_timer(ulong base)
 {
-	return (system_ticks - base);
+	return system_ticks - base;
 }
diff --git a/arch/x86/lib/video.c b/arch/x86/lib/video.c
index 0efcf3f..3d6b24d 100644
--- a/arch/x86/lib/video.c
+++ b/arch/x86/lib/video.c
@@ -123,7 +123,7 @@ static void __video_putc(const char c, int *x, int *y)
 
 static void video_putc(const char c)
 {
-	int x,y,pos;
+	int x, y, pos;
 
 	x = orig_x;
 	y = orig_y;
@@ -142,7 +142,7 @@ static void video_putc(const char c)
 
 static void video_puts(const char *s)
 {
-	int x,y,pos;
+	int x, y, pos;
 	char c;
 
 	x = orig_x;
@@ -187,7 +187,7 @@ int video_init(void)
 	printf("pos %x %d %d\n", pos, orig_x, orig_y);
 #endif
 	if (orig_y > lines)
-		orig_x = orig_y =0;
+		orig_x = orig_y = 0;
 
 	memset(&vga_dev, 0, sizeof(vga_dev));
 	strcpy(vga_dev.name, "vga");
diff --git a/arch/x86/lib/video_bios.c b/arch/x86/lib/video_bios.c
index 7574f77..f89f7d6 100644
--- a/arch/x86/lib/video_bios.c
+++ b/arch/x86/lib/video_bios.c
@@ -28,86 +28,94 @@
 #include <asm/realmode.h>
 #include <asm/io.h>
 #include <asm/pci.h>
+#include "bios.h"
 
 #undef PCI_BIOS_DEBUG
 #undef VGA_BIOS_DEBUG
 
 #ifdef	VGA_BIOS_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
+#define	PRINTF(fmt, args...)	printf(fmt, ##args)
 #else
-#define PRINTF(fmt,args...)
+#define PRINTF(fmt, args...)
 #endif
 
 #ifdef CONFIG_PCI
 
 #ifdef PCI_BIOS_DEBUG
-#define RELOC_16(seg, off) *(u32*)(seg << 4 | (u32)&off)
-extern u32 num_pci_bios_present;
-extern u32 num_pci_bios_find_device;
-extern u32 num_pci_bios_find_class;
-extern u32 num_pci_bios_generate_special_cycle;
-extern u32 num_pci_bios_read_cfg_byte;
-extern u32 num_pci_bios_read_cfg_word;
-extern u32 num_pci_bios_read_cfg_dword;
-extern u32 num_pci_bios_write_cfg_byte;
-extern u32 num_pci_bios_write_cfg_word;
-extern u32 num_pci_bios_write_cfg_dword;
-extern u32 num_pci_bios_get_irq_routing;
-extern u32 num_pci_bios_set_irq;
-extern u32 num_pci_bios_unknown_function;
-
 void print_bios_bios_stat(void)
 {
 	printf("16 bit functions:\n");
-	printf("pci_bios_present:                %d\n", RELOC_16(0xf000, num_pci_bios_present));
-	printf("pci_bios_find_device:            %d\n", RELOC_16(0xf000, num_pci_bios_find_device));
-	printf("pci_bios_find_class:             %d\n", RELOC_16(0xf000, num_pci_bios_find_class));
-	printf("pci_bios_generate_special_cycle: %d\n", RELOC_16(0xf000, num_pci_bios_generate_special_cycle));
-	printf("pci_bios_read_cfg_byte:          %d\n", RELOC_16(0xf000, num_pci_bios_read_cfg_byte));
-	printf("pci_bios_read_cfg_word:          %d\n", RELOC_16(0xf000, num_pci_bios_read_cfg_word));
-	printf("pci_bios_read_cfg_dword:         %d\n", RELOC_16(0xf000, num_pci_bios_read_cfg_dword));
-	printf("pci_bios_write_cfg_byte:         %d\n", RELOC_16(0xf000, num_pci_bios_write_cfg_byte));
-	printf("pci_bios_write_cfg_word:         %d\n", RELOC_16(0xf000, num_pci_bios_write_cfg_word));
-	printf("pci_bios_write_cfg_dword:        %d\n", RELOC_16(0xf000, num_pci_bios_write_cfg_dword));
-	printf("pci_bios_get_irq_routing:        %d\n", RELOC_16(0xf000, num_pci_bios_get_irq_routing));
-	printf("pci_bios_set_irq:                %d\n", RELOC_16(0xf000, num_pci_bios_set_irq));
-	printf("pci_bios_unknown_function:       %d\n", RELOC_16(0xf000, num_pci_bios_unknown_function));
+	printf("pci_bios_present:                %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_present));
+	printf("pci_bios_find_device:            %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_find_device));
+	printf("pci_bios_find_class:             %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_find_class));
+	printf("pci_bios_generate_special_cycle: %d\n",
+			RELOC_16_LONG(0xf000,
+				      num_pci_bios_generate_special_cycle));
+	printf("pci_bios_read_cfg_byte:          %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_read_cfg_byte));
+	printf("pci_bios_read_cfg_word:          %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_read_cfg_word));
+	printf("pci_bios_read_cfg_dword:         %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_read_cfg_dword));
+	printf("pci_bios_write_cfg_byte:         %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_write_cfg_byte));
+	printf("pci_bios_write_cfg_word:         %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_write_cfg_word));
+	printf("pci_bios_write_cfg_dword:        %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_write_cfg_dword));
+	printf("pci_bios_get_irq_routing:        %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_get_irq_routing));
+	printf("pci_bios_set_irq:                %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_set_irq));
+	printf("pci_bios_unknown_function:       %d\n",
+			RELOC_16_LONG(0xf000, num_pci_bios_unknown_function));
 
 }
 #endif
 
 #ifdef CONFIG_VIDEO
 
-#define PCI_CLASS_VIDEO             3
-#define PCI_CLASS_VIDEO_STD         0
-#define PCI_CLASS_VIDEO_PROG_IF_VGA 0
+#define PCI_CLASS_VIDEO			3
+#define PCI_CLASS_VIDEO_STD		0
+#define PCI_CLASS_VIDEO_PROG_IF_VGA	0
 
-static struct pci_device_id supported[] = {
+DEFINE_PCI_DEVICE_TABLE(supported) = {
 	{PCI_VIDEO_VENDOR_ID, PCI_VIDEO_DEVICE_ID},
 	{}
 };
 
 static u32 probe_pci_video(void)
 {
-	pci_dev_t devbusfn;
+	struct pci_controller *hose;
+	pci_dev_t devbusfn = pci_find_devices(supported, 0);
 
-	if ((devbusfn = pci_find_devices(supported, 0) != -1)) {
+	if ((devbusfn != -1)) {
 		u32 old;
 		u32 addr;
 
 		/* PCI video device detected */
 		printf("Found PCI VGA device at %02x.%02x.%x\n",
-		       PCI_BUS(devbusfn), PCI_DEV(devbusfn), PCI_FUNC(devbusfn));
+		       PCI_BUS(devbusfn),
+		       PCI_DEV(devbusfn),
+		       PCI_FUNC(devbusfn));
 
 		/* Enable I/O decoding as well, PCI viudeo boards
 		 * support I/O accesses, but they provide no
 		 * bar register for this since the ports are fixed.
 		 */
-		pci_write_config_word(devbusfn, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_IO | PCI_COMMAND_MASTER);
+		pci_write_config_word(devbusfn,
+				      PCI_COMMAND,
+				      PCI_COMMAND_MEMORY |
+				      PCI_COMMAND_IO |
+				      PCI_COMMAND_MASTER);
 
 		/* Test the ROM decoder, do the device support a rom? */
 		pci_read_config_dword(devbusfn, PCI_ROM_ADDRESS, &old);
-		pci_write_config_dword(devbusfn, PCI_ROM_ADDRESS, (u32)PCI_ROM_ADDRESS_MASK);
+		pci_write_config_dword(devbusfn, PCI_ROM_ADDRESS,
+				       (u32)PCI_ROM_ADDRESS_MASK);
 		pci_read_config_dword(devbusfn, PCI_ROM_ADDRESS, &addr);
 		pci_write_config_dword(devbusfn, PCI_ROM_ADDRESS, old);
 
@@ -117,13 +125,14 @@ static u32 probe_pci_video(void)
 		}
 
 		/* device have a rom */
-		if (pci_shadow_rom(devbusfn, (void*)0xc0000)) {
+		if (pci_shadow_rom(devbusfn, (void *)0xc0000)) {
 			printf("Shadowing of PCI VGA BIOS failed\n");
 			return 0;
 		}
 
 		/* Now enable lagacy VGA port access */
-		if (pci_enable_legacy_video_ports(pci_bus_to_hose(PCI_BUS(devbusfn)))) {
+		hose = pci_bus_to_hose(PCI_BUS(devbusfn));
+		if (pci_enable_legacy_video_ports(hose)) {
 			printf("PCI VGA enable failed\n");
 			return 0;
 		}
@@ -131,7 +140,7 @@ static u32 probe_pci_video(void)
 
 		/* return the pci device info, that we'll need later */
 		return PCI_BUS(devbusfn) << 8 |
-			PCI_DEV(devbusfn) << 3 | (PCI_FUNC(devbusfn)&7);
+			PCI_DEV(devbusfn) << 3 | (PCI_FUNC(devbusfn) & 7);
 	}
 
 	return 0;
@@ -142,13 +151,17 @@ static int probe_isa_video(void)
 	u32 ptr;
 	char *buf;
 
-	if (0 == (ptr = isa_map_rom(0xc0000, 0x8000))) {
+	ptr = isa_map_rom(0xc0000, 0x8000);
+
+	if (!ptr)
 		return -1;
-	}
-	if (NULL == (buf=malloc(0x8000))) {
+
+	buf = malloc(0x8000);
+	if (!buf) {
 		isa_unmap_rom(ptr);
 		return -1;
 	}
+
 	if (readw(ptr) != 0xaa55) {
 		free(buf);
 		isa_unmap_rom(ptr);
@@ -156,9 +169,9 @@ static int probe_isa_video(void)
 	}
 
 	/* shadow the rom */
-	memcpy(buf, (void*)ptr, 0x8000);
+	memcpy(buf, (void *)ptr, 0x8000);
 	isa_unmap_rom(ptr);
-	memcpy((void*)0xc0000, buf, 0x8000);
+	memcpy((void *)0xc0000, buf, 0x8000);
 
 	free(buf);
 
@@ -168,35 +181,35 @@ static int probe_isa_video(void)
 int video_bios_init(void)
 {
 	struct pt_regs regs;
+	int size;
+	int i;
+	u8 sum;
 
 	/* clear the video bios area in case we warmbooted */
-	memset((void*)0xc0000, 0, 0x8000);
+	memset((void *)0xc0000, 0, 0x8000);
 	memset(&regs, 0, sizeof(struct pt_regs));
 
-	if (probe_isa_video()) {
+	if (probe_isa_video())
 		/* No ISA board found, try the PCI bus */
 		regs.eax = probe_pci_video();
-	}
 
 	/* Did we succeed in mapping any video bios */
 	if (readw(0xc0000) == 0xaa55) {
-	        int size;
-		int i;
-		u8 sum;
-
 		PRINTF("Found video bios signature\n");
-		size = 512*readb(0xc0002);
+		size = readb(0xc0002) * 512;
 		PRINTF("size %d\n", size);
-		sum=0;
-		for (i=0;i<size;i++) {
+		sum = 0;
+
+		for (i = 0; i < size; i++)
 			sum += readb(0xc0000 + i);
-		}
-		PRINTF("Checksum is %sOK\n",sum?"NOT ":"");
-		if (sum) {
+
+		PRINTF("Checksum is %sOK\n", sum ? "NOT " : "");
+
+		if (sum)
 			return 1;
-		}
 
-		/* some video bioses (ATI Mach64) seem to think that
+		/*
+		 * Some video bioses (ATI Mach64) seem to think that
 		 * the original int 10 handler is always at
 		 * 0xf000:0xf065 , place an iret instruction there
 		 */
@@ -205,13 +218,15 @@ int video_bios_init(void)
 		regs.esp = 0x8000;
 		regs.xss = 0x2000;
 		enter_realmode(0xc000, 3, &regs, &regs);
+
 		PRINTF("INT 0x10 vector after:  %04x:%04x\n",
 		       readw(0x42), readw(0x40));
-		PRINTF("BIOS returned %scarry\n", regs.eflags & 1?"":"NOT ");
+		PRINTF("BIOS returned %scarry\n",
+		       regs.eflags & 0x00000001 ? "" : "NOT ");
 #ifdef PCI_BIOS_DEBUG
 		print_bios_bios_stat();
 #endif
-		return (regs.eflags & 1);
+		return regs.eflags & 0x00000001;
 
 	}
 
diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c
index d2dd6fd..8b42b5c 100644
--- a/arch/x86/lib/zimage.c
+++ b/arch/x86/lib/zimage.c
@@ -45,11 +45,11 @@
  *	0x8000-0x8FFF	Stack and heap
  *	0x9000-0x90FF	Kernel command line
  */
-#define DEFAULT_SETUP_BASE  0x90000
-#define COMMAND_LINE_OFFSET 0x9000
-#define HEAP_END_OFFSET     0x8e00
+#define DEFAULT_SETUP_BASE	0x90000
+#define COMMAND_LINE_OFFSET	0x9000
+#define HEAP_END_OFFSET		0x8e00
 
-#define COMMAND_LINE_SIZE   2048
+#define COMMAND_LINE_SIZE	2048
 
 static void build_command_line(char *command_line, int auto_boot)
 {
@@ -60,23 +60,20 @@ static void build_command_line(char *command_line, int auto_boot)
 	env_command_line =  getenv("bootargs");
 
 	/* set console= argument if we use a serial console */
-	if (NULL == strstr(env_command_line, "console=")) {
-		if (0==strcmp(getenv("stdout"), "serial")) {
+	if (!strstr(env_command_line, "console=")) {
+		if (!strcmp(getenv("stdout"), "serial")) {
 
 			/* We seem to use serial console */
 			sprintf(command_line, "console=ttyS0,%s ",
-				 getenv("baudrate"));
+				getenv("baudrate"));
 		}
 	}
 
-	if (auto_boot) {
+	if (auto_boot)
 		strcat(command_line, "auto ");
-	}
 
-	if (NULL != env_command_line) {
+	if (env_command_line)
 		strcat(command_line, env_command_line);
-	}
-
 
 	printf("Kernel command line: \"%s\"\n", command_line);
 }
@@ -90,14 +87,16 @@ void *load_zimage(char *image, unsigned long kernel_size,
 	int bootproto;
 	int big_image;
 	void *load_address;
+	struct setup_header *hdr;
 
-	struct setup_header *hdr = (struct setup_header *)(image + SETUP_SECTS_OFF);
+	hdr = (struct setup_header *)(image + SETUP_SECTS_OFF);
 
-	setup_base = (void*)DEFAULT_SETUP_BASE;	/* base address for real-mode segment */
+	/* base address for real-mode segment */
+	setup_base = (void *)DEFAULT_SETUP_BASE;
 
 	if (KERNEL_MAGIC != hdr->boot_flag) {
 		printf("Error: Invalid Boot Flag (found 0x%04x, expected 0x%04x)\n",
-				hdr->boot_flag, KERNEL_MAGIC);
+		       hdr->boot_flag, KERNEL_MAGIC);
 		return 0;
 	} else {
 		printf("Valid Boot Flag\n");
@@ -124,43 +123,50 @@ void *load_zimage(char *image, unsigned long kernel_size,
 
 	printf("Setup Size = 0x%8.8lx\n", (ulong)setup_size);
 
-	if (setup_size > SETUP_MAX_SIZE) {
+	if (setup_size > SETUP_MAX_SIZE)
 		printf("Error: Setup is too large (%d bytes)\n", setup_size);
-	}
 
 	/* Determine image type */
-	big_image = (bootproto >= 0x0200) && (hdr->loadflags & BIG_KERNEL_FLAG);
+	big_image = (bootproto >= 0x0200) &&
+		    (hdr->loadflags & BIG_KERNEL_FLAG);
 
 	/* Determine load address */
-	load_address = (void*)(big_image ? BZIMAGE_LOAD_ADDR : ZIMAGE_LOAD_ADDR);
+	load_address = (void *)(big_image ?
+				BZIMAGE_LOAD_ADDR :
+				ZIMAGE_LOAD_ADDR);
 
 	/* load setup */
-	printf("Moving Real-Mode Code to 0x%8.8lx (%d bytes)\n", (ulong)setup_base, setup_size);
+	printf("Moving Real-Mode Code to 0x%8.8lx (%d bytes)\n",
+	       (ulong)setup_base, setup_size);
 	memmove(setup_base, image, setup_size);
 
 	printf("Using boot protocol version %x.%02x\n",
 	       (bootproto & 0xff00) >> 8, bootproto & 0xff);
 
 	if (bootproto == 0x0100) {
+		*(u16 *)(setup_base + CMD_LINE_MAGIC_OFF) = COMMAND_LINE_MAGIC;
+		*(u16 *)(setup_base + CMD_LINE_OFFSET_OFF) = COMMAND_LINE_OFFSET;
 
-		*(u16*)(setup_base + CMD_LINE_MAGIC_OFF) = COMMAND_LINE_MAGIC;
-		*(u16*)(setup_base + CMD_LINE_OFFSET_OFF) = COMMAND_LINE_OFFSET;
-
-		/* A very old kernel MUST have its real-mode code
-		 * loaded at 0x90000 */
-
+		/*
+		 * A very old kernel MUST have its real-mode code
+		 * loaded at 0x90000
+		 */
 		if ((u32)setup_base != 0x90000) {
 			/* Copy the real-mode kernel */
-			memmove((void*)0x90000, setup_base, setup_size);
+			memmove((void *)0x90000, setup_base, setup_size);
+
 			/* Copy the command line */
-			memmove((void*)0x99000, setup_base+COMMAND_LINE_OFFSET,
-			       COMMAND_LINE_SIZE);
+			memmove((void *)0x99000,
+				setup_base + COMMAND_LINE_OFFSET,
+				COMMAND_LINE_SIZE);
 
-			setup_base = (void*)0x90000;		 /* Relocated */
+			 /* Relocated */
+			setup_base = (void *)0x90000;
 		}
 
 		/* It is recommended to clear memory up to the 32K mark */
-		memset((void*)0x90000 + setup_size, 0, SETUP_MAX_SIZE-setup_size);
+		memset((void *)0x90000 + setup_size, 0,
+		       SETUP_MAX_SIZE-setup_size);
 	}
 
 	/* We are now setting up the real-mode version of the header */
@@ -170,8 +176,9 @@ void *load_zimage(char *image, unsigned long kernel_size,
 		hdr->type_of_loader = 8;
 
 		if (hdr->setup_sects >= 15)
-			printf("Linux kernel version %s\n", (char *)
-					(setup_base + (hdr->kernel_version + 0x200)));
+			printf("Linux kernel version %s\n",
+			       (char *)(setup_base +
+					(hdr->kernel_version + 0x200)));
 		else
 			printf("Setup Sectors < 15 - Cannot print kernel version.\n");
 
@@ -193,8 +200,8 @@ void *load_zimage(char *image, unsigned long kernel_size,
 		hdr->cmd_line_ptr = (u32)setup_base + COMMAND_LINE_OFFSET;
 	} else if (bootproto >= 0x0200) {
 
-		*(u16*)(setup_base + CMD_LINE_MAGIC_OFF) = COMMAND_LINE_MAGIC;
-		*(u16*)(setup_base + CMD_LINE_OFFSET_OFF) = COMMAND_LINE_OFFSET;
+		*(u16 *)(setup_base + CMD_LINE_MAGIC_OFF) = COMMAND_LINE_MAGIC;
+		*(u16 *)(setup_base + CMD_LINE_OFFSET_OFF) = COMMAND_LINE_OFFSET;
 
 		hdr->setup_move_size = 0x9100;
 	}
@@ -221,8 +228,8 @@ void *load_zimage(char *image, unsigned long kernel_size,
 	/* build command line at COMMAND_LINE_OFFSET */
 	build_command_line(setup_base + COMMAND_LINE_OFFSET, auto_boot);
 
-	printf("Loading %czImage at address 0x%08x (%ld bytes)\n", big_image ? 'b' : ' ',
-	       (u32)load_address, kernel_size);
+	printf("Loading %czImage at address 0x%08x (%ld bytes)\n",
+	       big_image ? 'b' : ' ', (u32)load_address, kernel_size);
 
 
 	memmove(load_address, image + setup_size, kernel_size);
@@ -241,10 +248,11 @@ void boot_zimage(void *setup_base)
 	regs.xss = regs.xds;
 	regs.esp = 0x9000;
 	regs.eflags = 0;
-	enter_realmode(((u32)setup_base+SETUP_START_OFFSET)>>4, 0, &regs, &regs);
+	enter_realmode(((u32)setup_base+SETUP_START_OFFSET)>>4, 0, &regs,
+		       &regs);
 }
 
-int do_zboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 {
 	void *base_ptr;
 	void *bzImage_addr = NULL;
@@ -270,12 +278,12 @@ int do_zboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		bzImage_size = simple_strtoul(argv[2], NULL, 16);
 
 	/* Lets look for*/
-	base_ptr = load_zimage (bzImage_addr, bzImage_size, 0, 0, 0);
+	base_ptr = load_zimage(bzImage_addr, bzImage_size, 0, 0, 0);
 
-	if (NULL == base_ptr) {
-		printf ("## Kernel loading failed ...\n");
+	if (!base_ptr) {
+		printf("## Kernel loading failed ...\n");
 	} else {
-		printf ("## Transferring control to Linux (at address %08x) ...\n",
+		printf("## Transferring control to Linux (at address %08x) ...\n",
 			(u32)base_ptr);
 
 		/* we assume that the kernel is in place */