x86: ivybridge: Add additional LPC init

Set up all the remaining pieces of the LPC (low-pin-count) peripheral in
PCH (Peripheral Controller Hub).

Signed-off-by: Simon Glass <sjg@chromium.org>

2 files changed, 528 insertions, 1 deletions

diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c
index fab7c53..be4db74 100644
--- a/arch/x86/cpu/ivybridge/bd82x6x.c
+++ b/arch/x86/cpu/ivybridge/bd82x6x.c
@@ -88,6 +88,12 @@ void bd82x6x_pci_bus_enable_resources(pci_dev_t dev)
 
 int bd82x6x_init_pci_devices(void)
 {
+	struct pci_controller *hose;
+
+	hose = pci_bus_to_hose(0);
+	lpc_enable(PCH_LPC_DEV);
+	lpc_init(hose, PCH_LPC_DEV);
+
 	return 0;
 }
 
diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c
index 621ef2c..43fdd31 100644
--- a/arch/x86/cpu/ivybridge/lpc.c
+++ b/arch/x86/cpu/ivybridge/lpc.c
@@ -9,10 +9,460 @@
 #include <common.h>
 #include <errno.h>
 #include <fdtdec.h>
+#include <rtc.h>
 #include <pci.h>
+#include <asm/acpi.h>
+#include <asm/interrupt.h>
+#include <asm/io.h>
+#include <asm/ioapic.h>
 #include <asm/pci.h>
 #include <asm/arch/pch.h>
 
+#define NMI_OFF				0
+
+#define ENABLE_ACPI_MODE_IN_COREBOOT	0
+#define TEST_SMM_FLASH_LOCKDOWN		0
+
+static int pch_enable_apic(pci_dev_t dev)
+{
+	u32 reg32;
+	int i;
+
+	/* Enable ACPI I/O and power management. Set SCI IRQ to IRQ9 */
+	pci_write_config8(dev, ACPI_CNTL, 0x80);
+
+	writel(0, IO_APIC_INDEX);
+	writel(1 << 25, IO_APIC_DATA);
+
+	/* affirm full set of redirection table entries ("write once") */
+	writel(1, IO_APIC_INDEX);
+	reg32 = readl(IO_APIC_DATA);
+	writel(1, IO_APIC_INDEX);
+	writel(reg32, IO_APIC_DATA);
+
+	writel(0, IO_APIC_INDEX);
+	reg32 = readl(IO_APIC_DATA);
+	debug("PCH APIC ID = %x\n", (reg32 >> 24) & 0x0f);
+	if (reg32 != (1 << 25)) {
+		printf("APIC Error - cannot write to registers\n");
+		return -EPERM;
+	}
+
+	debug("Dumping IOAPIC registers\n");
+	for (i = 0;  i < 3; i++) {
+		writel(i, IO_APIC_INDEX);
+		debug("  reg 0x%04x:", i);
+		reg32 = readl(IO_APIC_DATA);
+		debug(" 0x%08x\n", reg32);
+	}
+
+	/* Select Boot Configuration register. */
+	writel(3, IO_APIC_INDEX);
+
+	/* Use Processor System Bus to deliver interrupts. */
+	writel(1, IO_APIC_DATA);
+
+	return 0;
+}
+
+static void pch_enable_serial_irqs(pci_dev_t dev)
+{
+	u32 value;
+
+	/* Set packet length and toggle silent mode bit for one frame. */
+	value = (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0);
+#ifdef CONFIG_SERIRQ_CONTINUOUS_MODE
+	pci_write_config8(dev, SERIRQ_CNTL, value);
+#else
+	pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6));
+#endif
+}
+
+static int pch_pirq_init(const void *blob, int node, pci_dev_t dev)
+{
+	uint8_t route[8], *ptr;
+
+	if (fdtdec_get_byte_array(blob, node, "intel,pirq-routing", route,
+				  sizeof(route)))
+		return -EINVAL;
+	ptr = route;
+	pci_write_config8(dev, PIRQA_ROUT, *ptr++);
+	pci_write_config8(dev, PIRQB_ROUT, *ptr++);
+	pci_write_config8(dev, PIRQC_ROUT, *ptr++);
+	pci_write_config8(dev, PIRQD_ROUT, *ptr++);
+
+	pci_write_config8(dev, PIRQE_ROUT, *ptr++);
+	pci_write_config8(dev, PIRQF_ROUT, *ptr++);
+	pci_write_config8(dev, PIRQG_ROUT, *ptr++);
+	pci_write_config8(dev, PIRQH_ROUT, *ptr++);
+
+	/*
+	 * TODO(sjg@chromium.org): U-Boot does not set up the interrupts
+	 * here. It's unclear if it is needed
+	 */
+	return 0;
+}
+
+static int pch_gpi_routing(const void *blob, int node, pci_dev_t dev)
+{
+	u8 route[16];
+	u32 reg;
+	int gpi;
+
+	if (fdtdec_get_byte_array(blob, node, "intel,gpi-routing", route,
+				  sizeof(route)))
+		return -EINVAL;
+
+	for (reg = 0, gpi = 0; gpi < ARRAY_SIZE(route); gpi++)
+		reg |= route[gpi] << (gpi * 2);
+
+	pci_write_config32(dev, 0xb8, reg);
+
+	return 0;
+}
+
+static int pch_power_options(const void *blob, int node, pci_dev_t dev)
+{
+	u8 reg8;
+	u16 reg16, pmbase;
+	u32 reg32;
+	const char *state;
+	int pwr_on;
+	int nmi_option;
+	int ret;
+
+	/*
+	 * Which state do we want to goto after g3 (power restored)?
+	 * 0 == S0 Full On
+	 * 1 == S5 Soft Off
+	 *
+	 * If the option is not existent (Laptops), use Kconfig setting.
+	 * TODO(sjg@chromium.org): Make this configurable
+	 */
+	pwr_on = MAINBOARD_POWER_ON;
+
+	reg16 = pci_read_config16(dev, GEN_PMCON_3);
+	reg16 &= 0xfffe;
+	switch (pwr_on) {
+	case MAINBOARD_POWER_OFF:
+		reg16 |= 1;
+		state = "off";
+		break;
+	case MAINBOARD_POWER_ON:
+		reg16 &= ~1;
+		state = "on";
+		break;
+	case MAINBOARD_POWER_KEEP:
+		reg16 &= ~1;
+		state = "state keep";
+		break;
+	default:
+		state = "undefined";
+	}
+
+	reg16 &= ~(3 << 4);	/* SLP_S4# Assertion Stretch 4s */
+	reg16 |= (1 << 3);	/* SLP_S4# Assertion Stretch Enable */
+
+	reg16 &= ~(1 << 10);
+	reg16 |= (1 << 11);	/* SLP_S3# Min Assertion Width 50ms */
+
+	reg16 |= (1 << 12);	/* Disable SLP stretch after SUS well */
+
+	pci_write_config16(dev, GEN_PMCON_3, reg16);
+	debug("Set power %s after power failure.\n", state);
+
+	/* Set up NMI on errors. */
+	reg8 = inb(0x61);
+	reg8 &= 0x0f;		/* Higher Nibble must be 0 */
+	reg8 &= ~(1 << 3);	/* IOCHK# NMI Enable */
+	reg8 |= (1 << 2); /* PCI SERR# Disable for now */
+	outb(reg8, 0x61);
+
+	reg8 = inb(0x70);
+	/* TODO(sjg@chromium.org): Make this configurable */
+	nmi_option = NMI_OFF;
+	if (nmi_option) {
+		debug("NMI sources enabled.\n");
+		reg8 &= ~(1 << 7);	/* Set NMI. */
+	} else {
+		debug("NMI sources disabled.\n");
+		/* Can't mask NMI from PCI-E and NMI_NOW */
+		reg8 |= (1 << 7);
+	}
+	outb(reg8, 0x70);
+
+	/* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
+	reg16 = pci_read_config16(dev, GEN_PMCON_1);
+	reg16 &= ~(3 << 0);	/* SMI# rate 1 minute */
+	reg16 &= ~(1 << 10);	/* Disable BIOS_PCI_EXP_EN for native PME */
+#if DEBUG_PERIODIC_SMIS
+	/* Set DEBUG_PERIODIC_SMIS in pch.h to debug using periodic SMIs */
+	reg16 |= (3 << 0);	/* Periodic SMI every 8s */
+#endif
+	pci_write_config16(dev, GEN_PMCON_1, reg16);
+
+	/* Set the board's GPI routing. */
+	ret = pch_gpi_routing(blob, node, dev);
+	if (ret)
+		return ret;
+
+	pmbase = pci_read_config16(dev, 0x40) & 0xfffe;
+
+	writel(pmbase + GPE0_EN, fdtdec_get_int(blob, node,
+						"intel,gpe0-enable", 0));
+	writew(pmbase + ALT_GP_SMI_EN, fdtdec_get_int(blob, node,
+						"intel,alt-gp-smi-enable", 0));
+
+	/* Set up power management block and determine sleep mode */
+	reg32 = inl(pmbase + 0x04); /* PM1_CNT */
+	reg32 &= ~(7 << 10);	/* SLP_TYP */
+	reg32 |= (1 << 0);	/* SCI_EN */
+	outl(reg32, pmbase + 0x04);
+
+	/* Clear magic status bits to prevent unexpected wake */
+	setbits_le32(RCB_REG(0x3310), (1 << 4) | (1 << 5) | (1 << 0));
+	clrbits_le32(RCB_REG(0x3f02), 0xf);
+
+	return 0;
+}
+
+static void pch_rtc_init(pci_dev_t dev)
+{
+	int rtc_failed;
+	u8 reg8;
+
+	reg8 = pci_read_config8(dev, GEN_PMCON_3);
+	rtc_failed = reg8 & RTC_BATTERY_DEAD;
+	if (rtc_failed) {
+		reg8 &= ~RTC_BATTERY_DEAD;
+		pci_write_config8(dev, GEN_PMCON_3, reg8);
+	}
+	debug("rtc_failed = 0x%x\n", rtc_failed);
+
+#if CONFIG_HAVE_ACPI_RESUME
+	/* Avoid clearing pending interrupts and resetting the RTC control
+	 * register in the resume path because the Linux kernel relies on
+	 * this to know if it should restart the RTC timerqueue if the wake
+	 * was due to the RTC alarm.
+	 */
+	if (acpi_get_slp_type() == 3)
+		return;
+#endif
+	/* TODO: Handle power failure */
+	if (rtc_failed)
+		printf("RTC power failed\n");
+	rtc_init();
+}
+
+/* CougarPoint PCH Power Management init */
+static void cpt_pm_init(pci_dev_t dev)
+{
+	debug("CougarPoint PM init\n");
+	pci_write_config8(dev, 0xa9, 0x47);
+	setbits_le32(RCB_REG(0x2238), (1 << 6) | (1 << 0));
+
+	setbits_le32(RCB_REG(0x228c), 1 << 0);
+	setbits_le32(RCB_REG(0x1100), (1 << 13) | (1 << 14));
+	setbits_le32(RCB_REG(0x0900), 1 << 14);
+	writel(0xc0388400, RCB_REG(0x2304));
+	setbits_le32(RCB_REG(0x2314), (1 << 5) | (1 << 18));
+	setbits_le32(RCB_REG(0x2320), (1 << 15) | (1 << 1));
+	clrsetbits_le32(RCB_REG(0x3314), ~0x1f, 0xf);
+	writel(0x050f0000, RCB_REG(0x3318));
+	writel(0x04000000, RCB_REG(0x3324));
+	setbits_le32(RCB_REG(0x3340), 0xfffff);
+	setbits_le32(RCB_REG(0x3344), 1 << 1);
+
+	writel(0x0001c000, RCB_REG(0x3360));
+	writel(0x00061100, RCB_REG(0x3368));
+	writel(0x7f8fdfff, RCB_REG(0x3378));
+	writel(0x000003fc, RCB_REG(0x337c));
+	writel(0x00001000, RCB_REG(0x3388));
+	writel(0x0001c000, RCB_REG(0x3390));
+	writel(0x00000800, RCB_REG(0x33a0));
+	writel(0x00001000, RCB_REG(0x33b0));
+	writel(0x00093900, RCB_REG(0x33c0));
+	writel(0x24653002, RCB_REG(0x33cc));
+	writel(0x062108fe, RCB_REG(0x33d0));
+	clrsetbits_le32(RCB_REG(0x33d4), 0x0fff0fff, 0x00670060);
+	writel(0x01010000, RCB_REG(0x3a28));
+	writel(0x01010404, RCB_REG(0x3a2c));
+	writel(0x01041041, RCB_REG(0x3a80));
+	clrsetbits_le32(RCB_REG(0x3a84), 0x0000ffff, 0x00001001);
+	setbits_le32(RCB_REG(0x3a84), 1 << 24); /* SATA 2/3 disabled */
+	setbits_le32(RCB_REG(0x3a88), 1 << 0);  /* SATA 4/5 disabled */
+	writel(0x00000001, RCB_REG(0x3a6c));
+	clrsetbits_le32(RCB_REG(0x2344), ~0x00ffff00, 0xff00000c);
+	clrsetbits_le32(RCB_REG(0x80c), 0xff << 20, 0x11 << 20);
+	writel(0, RCB_REG(0x33c8));
+	setbits_le32(RCB_REG(0x21b0), 0xf);
+}
+
+/* PantherPoint PCH Power Management init */
+static void ppt_pm_init(pci_dev_t dev)
+{
+	debug("PantherPoint PM init\n");
+	pci_write_config8(dev, 0xa9, 0x47);
+	setbits_le32(RCB_REG(0x2238), 1 << 0);
+	setbits_le32(RCB_REG(0x228c), 1 << 0);
+	setbits_le16(RCB_REG(0x1100), (1 << 13) | (1 << 14));
+	setbits_le16(RCB_REG(0x0900), 1 << 14);
+	writel(0xc03b8400, RCB_REG(0x2304));
+	setbits_le32(RCB_REG(0x2314), (1 << 5) | (1 << 18));
+	setbits_le32(RCB_REG(0x2320), (1 << 15) | (1 << 1));
+	clrsetbits_le32(RCB_REG(0x3314), 0x1f, 0xf);
+	writel(0x054f0000, RCB_REG(0x3318));
+	writel(0x04000000, RCB_REG(0x3324));
+	setbits_le32(RCB_REG(0x3340), 0xfffff);
+	setbits_le32(RCB_REG(0x3344), (1 << 1) | (1 << 0));
+	writel(0x0001c000, RCB_REG(0x3360));
+	writel(0x00061100, RCB_REG(0x3368));
+	writel(0x7f8fdfff, RCB_REG(0x3378));
+	writel(0x000003fd, RCB_REG(0x337c));
+	writel(0x00001000, RCB_REG(0x3388));
+	writel(0x0001c000, RCB_REG(0x3390));
+	writel(0x00000800, RCB_REG(0x33a0));
+	writel(0x00001000, RCB_REG(0x33b0));
+	writel(0x00093900, RCB_REG(0x33c0));
+	writel(0x24653002, RCB_REG(0x33cc));
+	writel(0x067388fe, RCB_REG(0x33d0));
+	clrsetbits_le32(RCB_REG(0x33d4), 0x0fff0fff, 0x00670060);
+	writel(0x01010000, RCB_REG(0x3a28));
+	writel(0x01010404, RCB_REG(0x3a2c));
+	writel(0x01040000, RCB_REG(0x3a80));
+	clrsetbits_le32(RCB_REG(0x3a84), 0x0000ffff, 0x00001001);
+	/* SATA 2/3 disabled */
+	setbits_le32(RCB_REG(0x3a84), 1 << 24);
+	/* SATA 4/5 disabled */
+	setbits_le32(RCB_REG(0x3a88), 1 << 0);
+	writel(0x00000001, RCB_REG(0x3a6c));
+	clrsetbits_le32(RCB_REG(0x2344), 0xff0000ff, 0xff00000c);
+	clrsetbits_le32(RCB_REG(0x80c), 0xff << 20, 0x11 << 20);
+	setbits_le32(RCB_REG(0x33a4), (1 << 0));
+	writel(0, RCB_REG(0x33c8));
+	setbits_le32(RCB_REG(0x21b0), 0xf);
+}
+
+static void enable_hpet(void)
+{
+	/* Move HPET to default address 0xfed00000 and enable it */
+	clrsetbits_le32(RCB_REG(HPTC), 3 << 0, 1 << 7);
+}
+
+static void enable_clock_gating(pci_dev_t dev)
+{
+	u32 reg32;
+	u16 reg16;
+
+	setbits_le32(RCB_REG(0x2234), 0xf);
+
+	reg16 = pci_read_config16(dev, GEN_PMCON_1);
+	reg16 |= (1 << 2) | (1 << 11);
+	pci_write_config16(dev, GEN_PMCON_1, reg16);
+
+	pch_iobp_update(0xEB007F07, ~0UL, (1 << 31));
+	pch_iobp_update(0xEB004000, ~0UL, (1 << 7));
+	pch_iobp_update(0xEC007F07, ~0UL, (1 << 31));
+	pch_iobp_update(0xEC004000, ~0UL, (1 << 7));
+
+	reg32 = readl(RCB_REG(CG));
+	reg32 |= (1 << 31);
+	reg32 |= (1 << 29) | (1 << 28);
+	reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24);
+	reg32 |= (1 << 16);
+	reg32 |= (1 << 17);
+	reg32 |= (1 << 18);
+	reg32 |= (1 << 22);
+	reg32 |= (1 << 23);
+	reg32 &= ~(1 << 20);
+	reg32 |= (1 << 19);
+	reg32 |= (1 << 0);
+	reg32 |= (0xf << 1);
+	writel(reg32, RCB_REG(CG));
+
+	setbits_le32(RCB_REG(0x38c0), 0x7);
+	setbits_le32(RCB_REG(0x36d4), 0x6680c004);
+	setbits_le32(RCB_REG(0x3564), 0x3);
+}
+
+#if CONFIG_HAVE_SMI_HANDLER
+static void pch_lock_smm(pci_dev_t dev)
+{
+#if TEST_SMM_FLASH_LOCKDOWN
+	u8 reg8;
+#endif
+
+	if (acpi_slp_type != 3) {
+#if ENABLE_ACPI_MODE_IN_COREBOOT
+		debug("Enabling ACPI via APMC:\n");
+		outb(0xe1, 0xb2); /* Enable ACPI mode */
+		debug("done.\n");
+#else
+		debug("Disabling ACPI via APMC:\n");
+		outb(0x1e, 0xb2); /* Disable ACPI mode */
+		debug("done.\n");
+#endif
+	}
+
+	/* Don't allow evil boot loaders, kernels, or
+	 * userspace applications to deceive us:
+	 */
+	smm_lock();
+
+#if TEST_SMM_FLASH_LOCKDOWN
+	/* Now try this: */
+	debug("Locking BIOS to RO... ");
+	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
+	debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
+	      (reg8 & 1) ? "rw" : "ro");
+	reg8 &= ~(1 << 0);			/* clear BIOSWE */
+	pci_write_config8(dev, 0xdc, reg8);
+	reg8 |= (1 << 1);			/* set BLE */
+	pci_write_config8(dev, 0xdc, reg8);
+	debug("ok.\n");
+	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
+	debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
+	      (reg8 & 1) ? "rw" : "ro");
+
+	debug("Writing:\n");
+	writeb(0, 0xfff00000);
+	debug("Testing:\n");
+	reg8 |= (1 << 0);			/* set BIOSWE */
+	pci_write_config8(dev, 0xdc, reg8);
+
+	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
+	debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
+	      (reg8 & 1) ? "rw" : "ro");
+	debug("Done.\n");
+#endif
+}
+#endif
+
+static void pch_disable_smm_only_flashing(pci_dev_t dev)
+{
+	u8 reg8;
+
+	debug("Enabling BIOS updates outside of SMM... ");
+	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
+	reg8 &= ~(1 << 5);
+	pci_write_config8(dev, 0xdc, reg8);
+}
+
+static void pch_fixups(pci_dev_t dev)
+{
+	u8 gen_pmcon_2;
+
+	/* Indicate DRAM init done for MRC S3 to know it can resume */
+	gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2);
+	gen_pmcon_2 |= (1 << 7);
+	pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
+
+	/* Enable DMI ASPM in the PCH */
+	clrbits_le32(RCB_REG(0x2304), 1 << 10);
+	setbits_le32(RCB_REG(0x21a4), (1 << 11) | (1 << 10));
+	setbits_le32(RCB_REG(0x21a8), 0x3);
+}
+
 int lpc_early_init(const void *blob, int node, pci_dev_t dev)
 {
 	struct reg_info {
@@ -22,7 +472,7 @@ int lpc_early_init(const void *blob, int node, pci_dev_t dev)
 	int count;
 	int i;
 
-	count = fdtdec_get_int_array_count(blob, node, "gen-dec",
+	count = fdtdec_get_int_array_count(blob, node, "intel,gen-dec",
 			(u32 *)values, sizeof(values) / sizeof(u32));
 	if (count < 0)
 		return -EINVAL;
@@ -46,3 +496,74 @@ int lpc_early_init(const void *blob, int node, pci_dev_t dev)
 
 	return 0;
 }
+
+int lpc_init(struct pci_controller *hose, pci_dev_t dev)
+{
+	const void *blob = gd->fdt_blob;
+	int node;
+
+	debug("pch: lpc_init\n");
+	pci_write_bar32(hose, dev, 0, 0);
+	pci_write_bar32(hose, dev, 1, 0xff800000);
+	pci_write_bar32(hose, dev, 2, 0xfec00000);
+	pci_write_bar32(hose, dev, 3, 0x800);
+	pci_write_bar32(hose, dev, 4, 0x900);
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_LPC);
+	if (node < 0)
+		return -ENOENT;
+
+	/* Set the value for PCI command register. */
+	pci_write_config16(dev, PCI_COMMAND, 0x000f);
+
+	/* IO APIC initialization. */
+	pch_enable_apic(dev);
+
+	pch_enable_serial_irqs(dev);
+
+	/* Setup the PIRQ. */
+	pch_pirq_init(blob, node, dev);
+
+	/* Setup power options. */
+	pch_power_options(blob, node, dev);
+
+	/* Initialize power management */
+	switch (pch_silicon_type()) {
+	case PCH_TYPE_CPT: /* CougarPoint */
+		cpt_pm_init(dev);
+		break;
+	case PCH_TYPE_PPT: /* PantherPoint */
+		ppt_pm_init(dev);
+		break;
+	default:
+		printf("Unknown Chipset: %#02x.%dx\n", PCI_DEV(dev),
+		       PCI_FUNC(dev));
+		return -ENOSYS;
+	}
+
+	/* Initialize the real time clock. */
+	pch_rtc_init(dev);
+
+	/* Initialize the High Precision Event Timers, if present. */
+	enable_hpet();
+
+	/* Initialize Clock Gating */
+	enable_clock_gating(dev);
+
+	pch_disable_smm_only_flashing(dev);
+
+#if CONFIG_HAVE_SMI_HANDLER
+	pch_lock_smm(dev);
+#endif
+
+	pch_fixups(dev);
+
+	return 0;
+}
+
+void lpc_enable(pci_dev_t dev)
+{
+	/* Enable PCH Display Port */
+	writew(0x0010, RCB_REG(DISPBDF));
+	setbits_le32(RCB_REG(FD2), PCH_ENABLE_DBDF);
+}