summaryrefslogtreecommitdiff
path: root/arch/x86/cpu/ivybridge/cpu.c
diff options
context:
space:
mode:
authorSimon Glass <sjg@chromium.org>2014-11-12 22:42:19 -0700
committerSimon Glass <sjg@chromium.org>2014-11-21 07:34:13 +0100
commitf5fbbe95798dba8f1536892598afbf33b5c07b5f (patch)
treece333098bc5a1049a82093450deb9fe55df3ed44 /arch/x86/cpu/ivybridge/cpu.c
parenteddbad224b9e0e6834f946f587923f27e54abb69 (diff)
downloadu-boot-imx-f5fbbe95798dba8f1536892598afbf33b5c07b5f.zip
u-boot-imx-f5fbbe95798dba8f1536892598afbf33b5c07b5f.tar.gz
u-boot-imx-f5fbbe95798dba8f1536892598afbf33b5c07b5f.tar.bz2
x86: ivybridge: Perform initial CPU setup
Set up the flex ratio (controls speed versus heat output) and a few other very early things. Signed-off-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'arch/x86/cpu/ivybridge/cpu.c')
-rw-r--r--arch/x86/cpu/ivybridge/cpu.c130
1 files changed, 130 insertions, 0 deletions
diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c
index 5d7640b..ab708dd 100644
--- a/arch/x86/cpu/ivybridge/cpu.c
+++ b/arch/x86/cpu/ivybridge/cpu.c
@@ -14,13 +14,123 @@
#include <errno.h>
#include <fdtdec.h>
#include <asm/cpu.h>
+#include <asm/io.h>
+#include <asm/msr.h>
+#include <asm/mtrr.h>
#include <asm/pci.h>
#include <asm/post.h>
#include <asm/processor.h>
+#include <asm/arch/model_206ax.h>
#include <asm/arch/pch.h>
DECLARE_GLOBAL_DATA_PTR;
+static void enable_port80_on_lpc(struct pci_controller *hose, pci_dev_t dev)
+{
+ /* Enable port 80 POST on LPC */
+ pci_hose_write_config_dword(hose, dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
+ clrbits_le32(RCB_REG(GCS), 4);
+}
+
+/*
+ * Enable Prefetching and Caching.
+ */
+static void enable_spi_prefetch(struct pci_controller *hose, pci_dev_t dev)
+{
+ u8 reg8;
+
+ pci_hose_read_config_byte(hose, dev, 0xdc, &reg8);
+ reg8 &= ~(3 << 2);
+ reg8 |= (2 << 2); /* Prefetching and Caching Enabled */
+ pci_hose_write_config_byte(hose, dev, 0xdc, reg8);
+}
+
+static void set_var_mtrr(
+ unsigned reg, unsigned base, unsigned size, unsigned type)
+
+{
+ /* Bit Bit 32-35 of MTRRphysMask should be set to 1 */
+ /* FIXME: It only support 4G less range */
+ wrmsr(MTRRphysBase_MSR(reg), base | type, 0);
+ wrmsr(MTRRphysMask_MSR(reg), ~(size - 1) | MTRRphysMaskValid,
+ (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1);
+}
+
+static void enable_rom_caching(void)
+{
+ disable_caches();
+ set_var_mtrr(1, 0xffc00000, 4 << 20, MTRR_TYPE_WRPROT);
+ enable_caches();
+
+ /* Enable Variable MTRRs */
+ wrmsr(MTRRdefType_MSR, 0x800, 0);
+}
+
+static int set_flex_ratio_to_tdp_nominal(void)
+{
+ msr_t flex_ratio, msr;
+ u8 nominal_ratio;
+
+ /* Minimum CPU revision for configurable TDP support */
+ if (cpuid_eax(1) < IVB_CONFIG_TDP_MIN_CPUID)
+ return -EINVAL;
+
+ /* Check for Flex Ratio support */
+ flex_ratio = msr_read(MSR_FLEX_RATIO);
+ if (!(flex_ratio.lo & FLEX_RATIO_EN))
+ return -EINVAL;
+
+ /* Check for >0 configurable TDPs */
+ msr = msr_read(MSR_PLATFORM_INFO);
+ if (((msr.hi >> 1) & 3) == 0)
+ return -EINVAL;
+
+ /* Use nominal TDP ratio for flex ratio */
+ msr = msr_read(MSR_CONFIG_TDP_NOMINAL);
+ nominal_ratio = msr.lo & 0xff;
+
+ /* See if flex ratio is already set to nominal TDP ratio */
+ if (((flex_ratio.lo >> 8) & 0xff) == nominal_ratio)
+ return 0;
+
+ /* Set flex ratio to nominal TDP ratio */
+ flex_ratio.lo &= ~0xff00;
+ flex_ratio.lo |= nominal_ratio << 8;
+ flex_ratio.lo |= FLEX_RATIO_LOCK;
+ msr_write(MSR_FLEX_RATIO, flex_ratio);
+
+ /* Set flex ratio in soft reset data register bits 11:6 */
+ clrsetbits_le32(RCB_REG(SOFT_RESET_DATA), 0x3f << 6,
+ (nominal_ratio & 0x3f) << 6);
+
+ /* Set soft reset control to use register value */
+ setbits_le32(RCB_REG(SOFT_RESET_CTRL), 1);
+
+ /* Issue warm reset, will be "CPU only" due to soft reset data */
+ outb(0x0, PORT_RESET);
+ outb(0x6, PORT_RESET);
+ cpu_hlt();
+
+ /* Not reached */
+ return -EINVAL;
+}
+
+static void set_spi_speed(void)
+{
+ u32 fdod;
+
+ /* Observe SPI Descriptor Component Section 0 */
+ writel(0x1000, RCB_REG(SPI_DESC_COMP0));
+
+ /* Extract the1 Write/Erase SPI Frequency from descriptor */
+ fdod = readl(RCB_REG(SPI_FREQ_WR_ERA));
+ fdod >>= 24;
+ fdod &= 7;
+
+ /* Set Software Sequence frequency to match */
+ clrsetbits_8(RCB_REG(SPI_FREQ_SWSEQ), 7, fdod);
+}
+
int arch_cpu_init(void)
{
const void *blob = gd->fdt_blob;
@@ -46,6 +156,26 @@ int arch_cpu_init(void)
if (ret)
return ret;
+ enable_spi_prefetch(hose, PCH_LPC_DEV);
+
+ /* This is already done in start.S, but let's do it in C */
+ enable_port80_on_lpc(hose, PCH_LPC_DEV);
+
+ /* already done in car.S */
+ if (false)
+ enable_rom_caching();
+
+ set_spi_speed();
+
+ /*
+ * We should do as little as possible before the serial console is
+ * up. Perhaps this should move to later. Our next lot of init
+ * happens in print_cpuinfo() when we have a console
+ */
+ ret = set_flex_ratio_to_tdp_nominal();
+ if (ret)
+ return ret;
+
return 0;
}