diff options
author | Peter Tyser <ptyser@xes-inc.com> | 2010-04-12 22:28:09 -0500 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2010-04-13 09:13:16 +0200 |
commit | 8d1f268204b07e172f3cb5cee0a3974d605b0b98 (patch) | |
tree | c3359e920cc886e7060fb099bf933496aca37153 /arch/ppc/cpu/mpc8260/cpu_init.c | |
parent | 819833af39a91fa1c1e8252862bbda6f5a602f7b (diff) | |
download | u-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.zip u-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.tar.gz u-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.tar.bz2 |
ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Diffstat (limited to 'arch/ppc/cpu/mpc8260/cpu_init.c')
-rw-r--r-- | arch/ppc/cpu/mpc8260/cpu_init.c | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/arch/ppc/cpu/mpc8260/cpu_init.c b/arch/ppc/cpu/mpc8260/cpu_init.c new file mode 100644 index 0000000..1d52773 --- /dev/null +++ b/arch/ppc/cpu/mpc8260/cpu_init.c @@ -0,0 +1,292 @@ +/* + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc8260.h> +#include <asm/cpm_8260.h> +#include <ioports.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_BOARD_GET_CPU_CLK_F) +extern unsigned long board_get_cpu_clk_f (void); +#endif + +static void config_8260_ioports (volatile immap_t * immr) +{ + int portnum; + + for (portnum = 0; portnum < 4; portnum++) { + uint pmsk = 0, + ppar = 0, + psor = 0, + pdir = 0, + podr = 0, + pdat = 0; + iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0]; + iop_conf_t *eiopc = iopc + 32; + uint msk = 1; + + /* + * NOTE: + * index 0 refers to pin 31, + * index 31 refers to pin 0 + */ + while (iopc < eiopc) { + if (iopc->conf) { + pmsk |= msk; + if (iopc->ppar) + ppar |= msk; + if (iopc->psor) + psor |= msk; + if (iopc->pdir) + pdir |= msk; + if (iopc->podr) + podr |= msk; + if (iopc->pdat) + pdat |= msk; + } + + msk <<= 1; + iopc++; + } + + if (pmsk != 0) { + volatile ioport_t *iop = ioport_addr (immr, portnum); + uint tpmsk = ~pmsk; + + /* + * the (somewhat confused) paragraph at the + * bottom of page 35-5 warns that there might + * be "unknown behaviour" when programming + * PSORx and PDIRx, if PPARx = 1, so I + * decided this meant I had to disable the + * dedicated function first, and enable it + * last. + */ + iop->ppar &= tpmsk; + iop->psor = (iop->psor & tpmsk) | psor; + iop->podr = (iop->podr & tpmsk) | podr; + iop->pdat = (iop->pdat & tpmsk) | pdat; + iop->pdir = (iop->pdir & tpmsk) | pdir; + iop->ppar |= ppar; + } + } +} + +#define SET_VAL_MASK(a, b, mask) ((a & mask) | (b & ~mask)) +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f (volatile immap_t * immr) +{ +#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */ + uint sccr; +#endif +#if defined(CONFIG_BOARD_GET_CPU_CLK_F) + unsigned long cpu_clk; +#endif + volatile memctl8260_t *memctl = &immr->im_memctl; + extern void m8260_cpm_reset (void); + + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + + /* Clear initial global data */ + memset ((void *) gd, 0, sizeof (gd_t)); + + /* RSR - Reset Status Register - clear all status (5-4) */ + gd->reset_status = immr->im_clkrst.car_rsr; + immr->im_clkrst.car_rsr = RSR_ALLBITS; + + /* RMR - Reset Mode Register - contains checkstop reset enable (5-5) */ + immr->im_clkrst.car_rmr = CONFIG_SYS_RMR; + + /* BCR - Bus Configuration Register (4-25) */ +#if defined(CONFIG_SYS_BCR_60x) && (CONFIG_SYS_BCR_SINGLE) + if (immr->im_siu_conf.sc_bcr & BCR_EBM) { + immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_60x, 0x80000010); + } else { + immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_SINGLE, 0x80000010); + } +#else + immr->im_siu_conf.sc_bcr = CONFIG_SYS_BCR; +#endif + + /* SIUMCR - contains debug pin configuration (4-31) */ +#if defined(CONFIG_SYS_SIUMCR_LOW) && (CONFIG_SYS_SIUMCR_HIGH) + cpu_clk = board_get_cpu_clk_f (); + if (cpu_clk >= 100000000) { + immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_HIGH, 0x9f3cc000); + } else { + immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_LOW, 0x9f3cc000); + } +#else + immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR; +#endif + + config_8260_ioports (immr); + + /* initialize time counter status and control register (4-40) */ + immr->im_sit.sit_tmcntsc = CONFIG_SYS_TMCNTSC; + + /* initialize the PIT (4-42) */ + immr->im_sit.sit_piscr = CONFIG_SYS_PISCR; + +#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */ + /* System clock control register (9-8) */ + sccr = immr->im_clkrst.car_sccr & + (SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK); + immr->im_clkrst.car_sccr = sccr | + (CONFIG_SYS_SCCR & ~(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK) ); +#endif /* !CONFIG_COGENT */ + + /* + * Memory Controller: + */ + + /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary + * addresses - these have to be modified later when FLASH size + * has been determined + */ + +#if defined(CONFIG_SYS_OR0_REMAP) + memctl->memc_or0 = CONFIG_SYS_OR0_REMAP; +#endif +#if defined(CONFIG_SYS_OR1_REMAP) + memctl->memc_or1 = CONFIG_SYS_OR1_REMAP; +#endif + + /* now restrict to preliminary range */ + /* the PS came from the HRCW, donīt change it */ + memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CONFIG_SYS_BR0_PRELIM, BRx_PS_MSK); + memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM; + +#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) + memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; + memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; +#endif + +#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) + memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; + memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; +#endif + +#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) + memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; + memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; +#endif + +#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) + memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM; + memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM; +#endif + +#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) + memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM; + memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM; +#endif + +#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) + memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM; + memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM; +#endif + +#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) + memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM; + memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM; +#endif + +#if defined(CONFIG_SYS_BR8_PRELIM) && defined(CONFIG_SYS_OR8_PRELIM) + memctl->memc_or8 = CONFIG_SYS_OR8_PRELIM; + memctl->memc_br8 = CONFIG_SYS_BR8_PRELIM; +#endif + +#if defined(CONFIG_SYS_BR9_PRELIM) && defined(CONFIG_SYS_OR9_PRELIM) + memctl->memc_or9 = CONFIG_SYS_OR9_PRELIM; + memctl->memc_br9 = CONFIG_SYS_BR9_PRELIM; +#endif + +#if defined(CONFIG_SYS_BR10_PRELIM) && defined(CONFIG_SYS_OR10_PRELIM) + memctl->memc_or10 = CONFIG_SYS_OR10_PRELIM; + memctl->memc_br10 = CONFIG_SYS_BR10_PRELIM; +#endif + +#if defined(CONFIG_SYS_BR11_PRELIM) && defined(CONFIG_SYS_OR11_PRELIM) + memctl->memc_or11 = CONFIG_SYS_OR11_PRELIM; + memctl->memc_br11 = CONFIG_SYS_BR11_PRELIM; +#endif + + m8260_cpm_reset (); +} + +/* + * initialize higher level parts of CPU like time base and timers + */ +int cpu_init_r (void) +{ + volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base; + + immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR; + + return (0); +} + +/* + * print out the reason for the reset + */ +int prt_8260_rsr (void) +{ + static struct { + ulong mask; + char *desc; + } bits[] = { + { + RSR_JTRS, "JTAG"}, { + RSR_CSRS, "Check Stop"}, { + RSR_SWRS, "Software Watchdog"}, { + RSR_BMRS, "Bus Monitor"}, { + RSR_ESRS, "External Soft"}, { + RSR_EHRS, "External Hard"} + }; + static int n = sizeof bits / sizeof bits[0]; + ulong rsr = gd->reset_status; + int i; + char *sep; + + puts (CPU_ID_STR " Reset Status:"); + + sep = " "; + for (i = 0; i < n; i++) + if (rsr & bits[i].mask) { + printf ("%s%s", sep, bits[i].desc); + sep = ", "; + } + + puts ("\n\n"); + return (0); +} |