Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:
	cpu/arm1176/cpu.c
	cpu/arm1176/start.S
	cpu/arm_cortexa8/s5pc1xx/Makefile
	cpu/arm_cortexa8/s5pc1xx/clock.c
	drivers/serial/serial_s5p.c
	include/asm-arm/arch-s5pc1xx/clk.h
	include/asm-arm/arch-s5pc1xx/gpio.h
	include/asm-arm/arch-s5pc1xx/uart.h

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

11 files changed, 2185 insertions, 0 deletions

diff --git a/arch/ppc/cpu/mpc5xx/Makefile b/arch/ppc/cpu/mpc5xx/Makefile
new file mode 100644
index 0000000..f2ebb9a
--- /dev/null
+++ b/arch/ppc/cpu/mpc5xx/Makefile
@@ -0,0 +1,59 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2003
+# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# File:			arch/ppc/cpu/mpc5xx/Makefile
+#
+# Discription:		Makefile to build mpc5xx cpu configuration.
+#			Will include top config.mk which itselfs
+#			uses the definitions made in arch/ppc/cpu/mpc5xx/config.mk
+#
+
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(CPU).a
+
+START	= start.o
+COBJS	= serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
+
+SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+START	:= $(addprefix $(obj),$(START))
+
+all:	$(obj).depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/ppc/cpu/mpc5xx/config.mk b/arch/ppc/cpu/mpc5xx/config.mk
new file mode 100644
index 0000000..e0b0ce1
--- /dev/null
+++ b/arch/ppc/cpu/mpc5xx/config.mk
@@ -0,0 +1,36 @@
+#
+# (C) Copyright 2003
+# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# File:			config.mk
+#
+# Discription:		compiler flags and make definitions
+#
+
+
+PLATFORM_RELFLAGS +=	-fPIC -meabi
+
+PLATFORM_CPPFLAGS +=	-DCONFIG_5xx -ffixed-r2 -mpowerpc -msoft-float
+
+# Use default linker script.  Board port can override in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xx/u-boot.lds
diff --git a/arch/ppc/cpu/mpc5xx/cpu.c b/arch/ppc/cpu/mpc5xx/cpu.c
new file mode 100644
index 0000000..7fffebc
--- /dev/null
+++ b/arch/ppc/cpu/mpc5xx/cpu.c
@@ -0,0 +1,171 @@
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File:		cpu.c
+ *
+ * Discription:		Some cpu specific function for watchdog,
+ *                      cpu version test, clock setting ...
+ *
+ */
+
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc5xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if (defined(CONFIG_MPC555))
+#  define	ID_STR	"MPC555/556"
+
+/*
+ * Check version of cpu with Processor Version Register (PVR)
+ */
+static int check_cpu_version (long clock, uint pvr, uint immr)
+{
+    char buf[32];
+	/* The highest 16 bits should be 0x0002 for a MPC555/556 */
+	if ((pvr >> 16) == 0x0002) {
+		printf (" " ID_STR " Version %x", (pvr >> 16));
+		printf (" at %s MHz:", strmhz (buf, clock));
+	} else {
+		printf ("Not supported cpu version");
+		return -1;
+	}
+	return 0;
+}
+#endif /* CONFIG_MPC555 */
+
+
+/*
+ * Check version of mpc5xx
+ */
+int checkcpu (void)
+{
+	ulong clock = gd->cpu_clk;
+	uint immr = get_immr (0);	/* Return full IMMR contents */
+	uint pvr = get_pvr ();		/* Retrieve PVR register */
+
+	puts ("CPU:   ");
+
+	return check_cpu_version (clock, pvr, immr);
+}
+
+/*
+ * Called by macro WATCHDOG_RESET
+ */
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+	int re_enable = disable_interrupts ();
+
+	reset_5xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
+	if (re_enable)
+		enable_interrupts ();
+}
+
+/*
+ * Will clear software reset
+ */
+void reset_5xx_watchdog (volatile immap_t * immr)
+{
+	/* Use the MPC5xx Internal Watchdog */
+	immr->im_siu_conf.sc_swsr = 0x556c;	/* Prevent SW time-out */
+	immr->im_siu_conf.sc_swsr = 0xaa39;
+}
+
+#endif /* CONFIG_WATCHDOG */
+
+
+/*
+ * Get timebase clock frequency
+ */
+unsigned long get_tbclk (void)
+{
+	volatile immap_t *immr = (volatile immap_t *) CONFIG_SYS_IMMR;
+	ulong oscclk, factor;
+
+	if (immr->im_clkrst.car_sccr & SCCR_TBS) {
+		return (gd->cpu_clk / 16);
+	}
+
+	factor = (((CONFIG_SYS_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
+
+	oscclk = gd->cpu_clk / factor;
+
+	if ((immr->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
+		return (oscclk / 4);
+	}
+	return (oscclk / 16);
+}
+
+void dcache_enable (void)
+{
+	return;
+}
+
+void dcache_disable (void)
+{
+	return;
+}
+
+int dcache_status (void)
+{
+	return 0;	/* always off */
+}
+
+/*
+ * Reset board
+ */
+int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+#if defined(CONFIG_PATI)
+	volatile ulong *addr = (ulong *) CONFIG_SYS_RESET_ADDRESS;
+	*addr = 1;
+#else
+	ulong addr;
+
+	/* Interrupts off, enable reset */
+	__asm__ volatile	("  mtspr	81, %r0		\n\t"
+				 "  mfmsr	%r3		\n\t"
+				 "  rlwinm	%r31,%r3,0,25,23\n\t"
+				 "  mtmsr	%r31		\n\t");
+	/*
+	 * Trying to execute the next instruction at a non-existing address
+	 * should cause a machine check, resulting in reset
+	 */
+#ifdef CONFIG_SYS_RESET_ADDRESS
+	addr = CONFIG_SYS_RESET_ADDRESS;
+#else
+	/*
+	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE         * - sizeof (ulong) is usually a valid address. Better pick an address
+	 * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
+	 * "(ulong)-1" used to be a good choice for many systems...
+	 */
+	addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
+#endif
+	((void (*) (void)) addr) ();
+#endif  /* #if defined(CONFIG_PATI) */
+	return 1;
+}
diff --git a/arch/ppc/cpu/mpc5xx/cpu_init.c b/arch/ppc/cpu/mpc5xx/cpu_init.c
new file mode 100644
index 0000000..cb4bf84
--- /dev/null
+++ b/arch/ppc/cpu/mpc5xx/cpu_init.c
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2003  Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File:		cpu_init.c
+ *
+ * Discription:		Contains initialisation functions to setup
+ *			the cpu properly
+ *
+ */
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <watchdog.h>
+
+/*
+ * Setup essential cpu registers to run
+ */
+void cpu_init_f (volatile immap_t * immr)
+{
+	volatile memctl5xx_t *memctl = &immr->im_memctl;
+	ulong reg;
+
+	/* SYPCR - contains watchdog control. This will enable watchdog */
+	/* if CONFIG_WATCHDOG is set */
+	immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
+
+#if defined(CONFIG_WATCHDOG)
+	reset_5xx_watchdog (immr);
+#endif
+
+	/* SIUMCR - contains debug pin configuration */
+	immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
+
+	/* Initialize timebase. Unlock TBSCRK */
+	immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
+	immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
+
+	/* Full IMB bus speed */
+	immr->im_uimb.uimb_umcr = CONFIG_SYS_UMCR;
+
+	/* Time base and decrementer will be enables (TBE) */
+	/* in init_timebase() in time.c called from board_init_f(). */
+
+	/* Initialize the PIT. Unlock PISCRK */
+	immr->im_sitk.sitk_piscrk = KAPWR_KEY;
+	immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
+
+#if !defined(CONFIG_PATI)
+	/* PATI sest PLL in start.S */
+	/* PLL (CPU clock) settings */
+	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
+
+	/* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
+	 * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
+	 * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the currentMF
+	 * field value.
+	 */
+#if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0)
+	reg = CONFIG_SYS_PLPRCR;			/* reset control bits   */
+#else
+	reg = immr->im_clkrst.car_plprcr;
+	reg &= PLPRCR_MF_MSK;			/* isolate MF field */
+	reg |= CONFIG_SYS_PLPRCR;			/* reset control bits   */
+#endif
+	immr->im_clkrst.car_plprcr = reg;
+
+#endif /* !defined(CONFIG_PATI) */
+
+	/* System integration timers. CONFIG_SYS_MASK has EBDF configuration */
+	immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
+	reg = immr->im_clkrst.car_sccr;
+	reg &= SCCR_MASK;
+	reg |= CONFIG_SYS_SCCR;
+	immr->im_clkrst.car_sccr = reg;
+
+	/* Memory Controller */
+	memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
+	memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
+
+#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
+#endif
+
+}
+
+/*
+ * Initialize higher level parts of cpu
+ */
+int cpu_init_r (void)
+{
+	/* Nothing to do at the moment */
+	return (0);
+}
diff --git a/arch/ppc/cpu/mpc5xx/interrupts.c b/arch/ppc/cpu/mpc5xx/interrupts.c
new file mode 100644
index 0000000..167543f
--- /dev/null
+++ b/arch/ppc/cpu/mpc5xx/interrupts.c
@@ -0,0 +1,207 @@
+/*
+ * (C) Copyright 2000-2002	Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2003		Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File:		interrupt.c
+ *
+ * Discription:		Contains interrupt routines needed by U-Boot
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <mpc5xx.h>
+#include <asm/processor.h>
+
+#if defined(CONFIG_PATI)
+/* PATI uses IRQs for PCI doorbell */
+#undef NR_IRQS
+#define NR_IRQS 16
+#endif
+
+struct interrupt_action {
+	interrupt_handler_t *handler;
+	void *arg;
+	int count;
+};
+
+static struct interrupt_action irq_vecs[NR_IRQS];
+
+/*
+ * Initialise interrupts
+ */
+
+int interrupt_init_cpu (ulong *decrementer_count)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	int vec;
+
+	/* Decrementer used here for status led */
+	*decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
+
+	/* Disable all interrupts */
+	immr->im_siu_conf.sc_simask = 0;
+	for (vec=0; vec<NR_IRQS; vec++) {
+		irq_vecs[vec].handler = NULL;
+		irq_vecs[vec].arg = NULL;
+		irq_vecs[vec].count = 0;
+	}
+
+	return (0);
+}
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt (struct pt_regs *regs)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	int irq;
+	ulong simask, newmask;
+	ulong vec, v_bit;
+
+	/*
+	 * read the SIVEC register and shift the bits down
+	 * to get the irq number
+	 */
+	vec = immr->im_siu_conf.sc_sivec;
+	irq = vec >> 26;
+	v_bit = 0x80000000UL >> irq;
+
+	/*
+	 * Read Interrupt Mask Register and Mask Interrupts
+	 */
+	simask = immr->im_siu_conf.sc_simask;
+	newmask = simask & (~(0xFFFF0000 >> irq));
+	immr->im_siu_conf.sc_simask = newmask;
+
+	if (!(irq & 0x1)) {		/* External Interrupt ?     */
+		ulong siel;
+
+		/*
+		 * Read Interrupt Edge/Level Register
+		 */
+		siel = immr->im_siu_conf.sc_siel;
+
+		if (siel & v_bit) {	/* edge triggered interrupt ?   */
+			/*
+			 * Rewrite SIPEND Register to clear interrupt
+			 */
+			immr->im_siu_conf.sc_sipend = v_bit;
+		}
+	}
+
+	if (irq_vecs[irq].handler != NULL) {
+		irq_vecs[irq].handler (irq_vecs[irq].arg);
+	} else {
+		printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
+				irq, vec);
+		/* turn off the bogus interrupt to avoid it from now */
+		simask &= ~v_bit;
+	}
+	/*
+	 * Re-Enable old Interrupt Mask
+	 */
+	immr->im_siu_conf.sc_simask = simask;
+}
+
+/*
+ * Install and free an interrupt handler
+ */
+void irq_install_handler (int vec, interrupt_handler_t * handler,
+						  void *arg)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	/* SIU interrupt */
+	if (irq_vecs[vec].handler != NULL) {
+		printf ("SIU interrupt %d 0x%x\n",
+			vec,
+			(uint) handler);
+	}
+	irq_vecs[vec].handler = handler;
+	irq_vecs[vec].arg = arg;
+	immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
+#if 0
+	printf ("Install SIU interrupt for vector %d ==> %p\n",
+		vec, handler);
+#endif
+}
+
+void irq_free_handler (int vec)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	/* SIU interrupt */
+#if 0
+	printf ("Free CPM interrupt for vector %d\n",
+		vec);
+#endif
+	immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
+	irq_vecs[vec].handler = NULL;
+	irq_vecs[vec].arg = NULL;
+}
+
+/*
+ *  Timer interrupt - gets called when  bit 0 of DEC changes from
+ *  0. Decrementer is enabled with bit TBE in TBSCR.
+ */
+void timer_interrupt_cpu (struct pt_regs *regs)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+#if 0
+	printf ("*** Timer Interrupt *** ");
+#endif
+	/* Reset Timer Status Bit and Timers Interrupt Status */
+	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
+	__asm__ ("nop");
+	immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS | PLPRCR_TMIST;
+
+	return;
+}
+
+#if defined(CONFIG_CMD_IRQ)
+/*******************************************************************************
+ *
+ * irqinfo - print information about IRQs
+ *
+ */
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int vec;
+
+	printf ("\nInterrupt-Information:\n");
+	printf ("Nr  Routine   Arg       Count\n");
+
+	for (vec=0; vec<NR_IRQS; vec++) {
+		if (irq_vecs[vec].handler != NULL) {
+			printf ("%02d  %08lx  %08lx  %d\n",
+				vec,
+				(ulong)irq_vecs[vec].handler,
+				(ulong)irq_vecs[vec].arg,
+				irq_vecs[vec].count);
+		}
+	}
+	return 0;
+}
+
+
+#endif
diff --git a/arch/ppc/cpu/mpc5xx/serial.c b/arch/ppc/cpu/mpc5xx/serial.c
new file mode 100644
index 0000000..88c6db8
--- /dev/null
+++ b/arch/ppc/cpu/mpc5xx/serial.c
@@ -0,0 +1,170 @@
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File:		serial.c
+ *
+ * Discription:		Serial interface driver for SCI1 and SCI2.
+ *			Since this code will be called from ROM use
+ *			only non-static local variables.
+ *
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc5xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Local function prototypes
+ */
+
+static int ready_to_send(void);
+
+/*
+ * Minimal global serial functions needed to use one of the SCI modules.
+ */
+
+int serial_init (void)
+{
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+	serial_setbrg();
+
+#if defined(CONFIG_5xx_CONS_SCI1)
+	/* 10-Bit, 1 start bit, 8 data bit, no parity, 1 stop bit */
+	immr->im_qsmcm.qsmcm_scc1r1 = SCI_M_10;
+	immr->im_qsmcm.qsmcm_scc1r1 = SCI_TE | SCI_RE;
+#else
+	immr->im_qsmcm.qsmcm_scc2r1 = SCI_M_10;
+	immr->im_qsmcm.qsmcm_scc2r1 = SCI_TE | SCI_RE;
+#endif
+	return 0;
+}
+
+void serial_putc(const char c)
+{
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+	/* Test for completition */
+	if(ready_to_send()) {
+#if defined(CONFIG_5xx_CONS_SCI1)
+		immr->im_qsmcm.qsmcm_sc1dr = (short)c;
+#else
+		immr->im_qsmcm.qsmcm_sc2dr = (short)c;
+#endif
+		if(c == '\n') {
+			if(ready_to_send());
+#if defined(CONFIG_5xx_CONS_SCI1)
+			immr->im_qsmcm.qsmcm_sc1dr = (short)'\r';
+#else
+			immr->im_qsmcm.qsmcm_sc2dr = (short)'\r';
+#endif
+		}
+	}
+}
+
+int serial_getc(void)
+{
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+	volatile short status;
+	unsigned char tmp;
+
+	/* New data ? */
+	do {
+#if defined(CONFIG_5xx_CONS_SCI1)
+		status = immr->im_qsmcm.qsmcm_sc1sr;
+#else
+		status = immr->im_qsmcm.qsmcm_sc2sr;
+#endif
+
+#if defined(CONFIG_WATCHDOG)
+		reset_5xx_watchdog (immr);
+#endif
+	} while ((status & SCI_RDRF) == 0);
+
+	/* Read data */
+#if defined(CONFIG_5xx_CONS_SCI1)
+	tmp = (unsigned char)(immr->im_qsmcm.qsmcm_sc1dr & SCI_SCXDR_MK);
+#else
+	tmp = (unsigned char)( immr->im_qsmcm.qsmcm_sc2dr & SCI_SCXDR_MK);
+#endif
+	return	tmp;
+}
+
+int serial_tstc()
+{
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+	short status;
+
+	/* New data character ? */
+#if defined(CONFIG_5xx_CONS_SCI1)
+	status = immr->im_qsmcm.qsmcm_sc1sr;
+#else
+	status = immr->im_qsmcm.qsmcm_sc2sr;
+#endif
+	return (status & SCI_RDRF);
+}
+
+void serial_setbrg (void)
+{
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+	short scxbr;
+
+	/* Set baudrate */
+	scxbr = (gd->cpu_clk / (32 * gd->baudrate));
+#if defined(CONFIG_5xx_CONS_SCI1)
+	immr->im_qsmcm.qsmcm_scc1r0 = (scxbr & SCI_SCXBR_MK);
+#else
+	immr->im_qsmcm.qsmcm_scc2r0 = (scxbr & SCI_SCXBR_MK);
+#endif
+}
+
+void serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc(*s);
+		++s;
+	}
+}
+
+int ready_to_send(void)
+{
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+	volatile short status;
+
+	do {
+#if defined(CONFIG_5xx_CONS_SCI1)
+		status = immr->im_qsmcm.qsmcm_sc1sr;
+#else
+		status = immr->im_qsmcm.qsmcm_sc2sr;
+#endif
+
+#if defined(CONFIG_WATCHDOG)
+		reset_5xx_watchdog (immr);
+#endif
+	} while ((status & SCI_TDRE) == 0);
+	return 1;
+
+}
diff --git a/arch/ppc/cpu/mpc5xx/speed.c b/arch/ppc/cpu/mpc5xx/speed.c
new file mode 100644
index 0000000..ea5c1de
--- /dev/null
+++ b/arch/ppc/cpu/mpc5xx/speed.c
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File:		speed.c
+ *
+ * Discription:		Provides cpu speed calculation
+ *
+ */
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Get cpu and bus clock
+ */
+int get_clocks (void)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+#ifndef	CONFIG_5xx_GCLK_FREQ
+	uint divf = (immr->im_clkrst.car_plprcr & PLPRCR_DIVF_MSK);
+	uint mf = ((immr->im_clkrst.car_plprcr & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT);
+	ulong vcoout;
+
+	vcoout = (CONFIG_SYS_OSC_CLK / (divf + 1)) * (mf + 1) * 2;
+	if(immr->im_clkrst.car_plprcr & PLPRCR_CSRC_MSK) {
+		gd->cpu_clk = vcoout / (2^(((immr->im_clkrst.car_sccr & SCCR_DFNL_MSK) >> SCCR_DFNL_SHIFT) + 1));
+	} else {
+		gd->cpu_clk = vcoout / (2^(immr->im_clkrst.car_sccr & SCCR_DFNH_MSK));
+	}
+
+#else /* CONFIG_5xx_GCLK_FREQ */
+	gd->bus_clk = CONFIG_5xx_GCLK_FREQ;
+#endif /* CONFIG_5xx_GCLK_FREQ */
+
+	if ((immr->im_clkrst.car_sccr & SCCR_EBDF11) == 0) {
+		/* No Bus Divider active */
+		gd->bus_clk = gd->cpu_clk;
+	} else {
+		/* CLKOUT is GCLK / 2 */
+		gd->bus_clk = gd->cpu_clk / 2;
+	}
+	return (0);
+}
diff --git a/arch/ppc/cpu/mpc5xx/spi.c b/arch/ppc/cpu/mpc5xx/spi.c
new file mode 100644
index 0000000..3ca15ea
--- /dev/null
+++ b/arch/ppc/cpu/mpc5xx/spi.c
@@ -0,0 +1,412 @@
+/*
+ * Copyright (c) 2001 Navin Boppuri / Prashant Patel
+ *	<nboppuri@trinetcommunication.com>,
+ *	<pmpatel@trinetcommunication.com>
+ * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
+ * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC5xx CPM SPI interface.
+ *
+ * Parts of this code are probably not portable and/or specific to
+ * the board which I used for the tests. Please send fixes/complaints
+ * to wd@denx.de
+ *
+ * Ported to MPC5xx
+ * Copyright (c) 2003 Denis Peter, MPL AG Switzerland, d.petr@mpl.ch.
+ */
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <asm/5xx_immap.h>
+#include <linux/ctype.h>
+#include <malloc.h>
+#include <post.h>
+#include <net.h>
+
+#if defined(CONFIG_SPI)
+
+#undef	DEBUG
+
+#define SPI_EEPROM_WREN		0x06
+#define SPI_EEPROM_RDSR		0x05
+#define SPI_EEPROM_READ		0x03
+#define SPI_EEPROM_WRITE	0x02
+
+
+#ifdef	DEBUG
+
+#define	DPRINT(a)	printf a;
+/* -----------------------------------------------
+ * Helper functions to peek into tx and rx buffers
+ * ----------------------------------------------- */
+static const char * const hex_digit = "0123456789ABCDEF";
+
+static char quickhex (int i)
+{
+	return hex_digit[i];
+}
+
+static void memdump (void *pv, int num)
+{
+	int i;
+	unsigned char *pc = (unsigned char *) pv;
+
+	for (i = 0; i < num; i++)
+		printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
+	printf ("\t");
+	for (i = 0; i < num; i++)
+		printf ("%c", isprint (pc[i]) ? pc[i] : '.');
+	printf ("\n");
+}
+#else	/* !DEBUG */
+
+#define	DPRINT(a)
+
+#endif	/* DEBUG */
+
+/* -------------------
+ * Function prototypes
+ * ------------------- */
+void spi_init (void);
+
+ssize_t spi_read (uchar *, int, uchar *, int);
+ssize_t spi_write (uchar *, int, uchar *, int);
+ssize_t spi_xfer (size_t);
+
+
+/* **************************************************************************
+ *
+ *  Function:    spi_init_f
+ *
+ *  Description: Init SPI-Controller (ROM part)
+ *
+ *  return:      ---
+ *
+ * *********************************************************************** */
+
+void spi_init_f (void)
+{
+	int i;
+
+	volatile immap_t *immr;
+	volatile qsmcm5xx_t *qsmcm;
+
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
+	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+
+	qsmcm->qsmcm_qsmcr = 0; /* all accesses enabled */
+	qsmcm->qsmcm_qspi_il = 0; /* lowest IRQ */
+
+	/* --------------------------------------------
+	 * GPIO or per. Function
+	 * PQSPAR[00] = 0 reserved
+	 * PQSPAR[01] = 1 [0x4000] -> PERI: (SPICS3)
+	 * PQSPAR[02] = 0 [0x0000] -> GPIO
+	 * PQSPAR[03] = 0 [0x0000] -> GPIO
+	 * PQSPAR[04] = 1 [0x0800] -> PERI: (SPICS0)
+	 * PQSPAR[05] = 0 reseved
+	 * PQSPAR[06] = 1 [0x0200] -> PERI: (SPIMOSI)
+	 * PQSPAR[07] = 1 [0x0100] -> PERI: (SPIMISO)
+	 * -------------------------------------------- */
+	qsmcm->qsmcm_pqspar =  0x3 | (CONFIG_SYS_SPI_CS_USED << 3);
+
+	 /* --------------------------------------------
+	 * DDRQS[00] = 0 reserved
+	 * DDRQS[01] = 1 [0x0040] -> SPICS3 Output
+	 * DDRQS[02] = 0 [0x0000] -> GPIO Output
+	 * DDRQS[03] = 0 [0x0000] -> GPIO Output
+	 * DDRQS[04] = 1 [0x0008] -> SPICS0 Output
+	 * DDRQS[05] = 1 [0x0004] -> SPICLK Output
+	 * DDRQS[06] = 1 [0x0002] -> SPIMOSI Output
+	 * DDRQS[07] = 0 [0x0001] -> SPIMISO Input
+	 * -------------------------------------------- */
+	qsmcm->qsmcm_ddrqs = 0x7E;
+	 /* --------------------------------------------
+	 * Base state for used SPI CS pins, if base = 0 active must be 1
+	 * PORTQS[00] = 0 reserved
+	 * PORTQS[01] = 0 reserved
+	 * PORTQS[02] = 0 reserved
+	 * PORTQS[03] = 0 reserved
+	 * PORTQS[04] = 0 [0x0000] RxD2
+	 * PORTQS[05] = 1 [0x0400] TxD2
+	 * PORTQS[06] = 0 [0x0000] RxD1
+	 * PORTQS[07] = 1 [0x0100] TxD1
+	 * PORTQS[08] = 0 reserved
+	 * PORTQS[09] = 0 [0x0000] -> SPICS3 Base Output
+	 * PORTQS[10] = 0 [0x0000] -> SPICS2 Base Output
+	 * PORTQS[11] = 0 [0x0000] -> SPICS1 Base Output
+	 * PORTQS[12] = 0 [0x0000] -> SPICS0 Base Output
+	 * PORTQS[13] = 0 [0x0004] -> SPICLK Output
+	 * PORTQS[14] = 0 [0x0002] -> SPIMOSI Output
+	 * PORTQS[15] = 0 [0x0001] -> SPIMISO Input
+	 * -------------------------------------------- */
+	qsmcm->qsmcm_portqs |= (CONFIG_SYS_SPI_CS_BASE << 3);
+	/* --------------------------------------------
+	 * Controll Register 0
+	 * SPCR0[00] = 1 (0x8000) Master
+	 * SPCR0[01] = 0 (0x0000) Wired-Or
+	 * SPCR0[2..5] = (0x2000) Bits per transfer (default 8)
+	 * SPCR0[06] = 0 (0x0000) Normal polarity
+	 * SPCR0[07] = 0 (0x0000) Normal Clock Phase
+	 * SPCR0[08..15] = 14 1.4MHz
+	 */
+	qsmcm->qsmcm_spcr0=0xA00E;
+	/* --------------------------------------------
+	 * Controll Register 1
+	 * SPCR1[00] = 0 (0x0000) QSPI enabled
+	 * SPCR1[1..7] =  (0x7F00) Delay before Transfer
+	 * SPCR1[8..15] = (0x0000) Delay After transfer (204.8usec@40MHz)
+	 */
+	qsmcm->qsmcm_spcr1=0x7F00;
+	/* --------------------------------------------
+	 * Controll Register 2
+	 * SPCR2[00] = 0 (0x0000) SPI IRQs Disabeld
+	 * SPCR2[01] = 0 (0x0000) No Wrap around
+	 * SPCR2[02] = 0 (0x0000) Wrap to 0
+	 * SPCR2[3..7] = (0x0000) End Queue pointer = 0
+	 * SPCR2[8..10] = 0 (0x0000) reserved
+	 * SPCR2[11..15] = 0 (0x0000) NewQueue Address = 0
+	 */
+	qsmcm->qsmcm_spcr2=0x0000;
+	/* --------------------------------------------
+	 * Controll Register 3
+	 * SPCR3[00..04] = 0 (0x0000) reserved
+	 * SPCR3[05] = 0 (0x0000) Feedback disabled
+	 * SPCR3[06] = 0 (0x0000) IRQ on HALTA & MODF disabled
+	 * SPCR3[07] = 0 (0x0000) Not halted
+	 */
+	qsmcm->qsmcm_spcr3=0x00;
+	/* --------------------------------------------
+	 * SPSR (Controll Register 3) Read only/ reset Flags 08,09,10
+	 * SPCR3[08] = 1 (0x80) QSPI finished
+	 * SPCR3[09] = 1 (0x40) Mode Fault Flag
+	 * SPCR3[10] = 1 (0x20) HALTA
+	 * SPCR3[11..15] = 0 (0x0000) Last executed command
+	 */
+	qsmcm->qsmcm_spsr=0xE0;
+	/*-------------------------------------------
+	 * Setup RAM
+	 */
+	for(i=0;i<32;i++) {
+		 qsmcm->qsmcm_recram[i]=0x0000;
+		 qsmcm->qsmcm_tranram[i]=0x0000;
+		 qsmcm->qsmcm_comdram[i]=0x00;
+	}
+	return;
+}
+
+/* **************************************************************************
+ *
+ *  Function:    spi_init_r
+ *  Dummy, all initializations have been done in spi_init_r
+ * *********************************************************************** */
+void spi_init_r (void)
+{
+	return;
+
+}
+
+/****************************************************************************
+ *  Function:    spi_write
+ **************************************************************************** */
+ssize_t short_spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+	int i,dlen;
+	volatile immap_t *immr;
+	volatile qsmcm5xx_t *qsmcm;
+
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
+	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+	for(i=0;i<32;i++) {
+		 qsmcm->qsmcm_recram[i]=0x0000;
+		 qsmcm->qsmcm_tranram[i]=0x0000;
+		 qsmcm->qsmcm_comdram[i]=0x00;
+	}
+	qsmcm->qsmcm_tranram[0] =  SPI_EEPROM_WREN; /* write enable */
+	spi_xfer(1);
+	i=0;
+	qsmcm->qsmcm_tranram[i++] =  SPI_EEPROM_WRITE; /* WRITE memory array */
+	qsmcm->qsmcm_tranram[i++] =  addr[0];
+	qsmcm->qsmcm_tranram[i++] =  addr[1];
+
+	for(dlen=0;dlen<len;dlen++) {
+		qsmcm->qsmcm_tranram[i+dlen] = buffer[dlen]; /* WRITE memory array */
+	}
+	/* transmit it */
+	spi_xfer(i+dlen);
+	/* ignore received data	*/
+	for (i = 0; i < 1000; i++) {
+		qsmcm->qsmcm_tranram[0] =  SPI_EEPROM_RDSR; /* read status */
+		qsmcm->qsmcm_tranram[1] = 0;
+		spi_xfer(2);
+		if (!(qsmcm->qsmcm_recram[1] & 1)) {
+			break;
+		}
+		udelay(1000);
+	}
+	if (i >= 1000) {
+		printf ("*** spi_write: Time out while writing!\n");
+	}
+	return len;
+}
+
+#define TRANSFER_LEN 16
+
+ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+	int index,i,newlen;
+	uchar newaddr[2];
+	int curraddr;
+
+	curraddr=(addr[alen-2]<<8)+addr[alen-1];
+	i=len;
+	index=0;
+	do {
+		newaddr[1]=(curraddr & 0xff);
+		newaddr[0]=((curraddr>>8) & 0xff);
+		if(i>TRANSFER_LEN) {
+			newlen=TRANSFER_LEN;
+			i-=TRANSFER_LEN;
+		}
+		else {
+			newlen=i;
+			i=0;
+		}
+		short_spi_write (newaddr, 2, &buffer[index], newlen);
+		index+=newlen;
+		curraddr+=newlen;
+	}while(i);
+	return (len);
+}
+
+/****************************************************************************
+ *  Function:    spi_read
+ **************************************************************************** */
+ssize_t short_spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+	int i;
+	volatile immap_t *immr;
+	volatile qsmcm5xx_t *qsmcm;
+
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
+	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+
+	for(i=0;i<32;i++) {
+		 qsmcm->qsmcm_recram[i]=0x0000;
+		 qsmcm->qsmcm_tranram[i]=0x0000;
+		 qsmcm->qsmcm_comdram[i]=0x00;
+	}
+	i=0;
+	qsmcm->qsmcm_tranram[i++] = (SPI_EEPROM_READ); /* READ memory array */
+	qsmcm->qsmcm_tranram[i++] = addr[0] & 0xff;
+	qsmcm->qsmcm_tranram[i++] = addr[1] & 0xff;
+	spi_xfer(3 + len);
+	for(i=0;i<len;i++) {
+		*buffer++=(char)qsmcm->qsmcm_recram[i+3];
+	}
+	return len;
+}
+
+ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+	int index,i,newlen;
+	uchar newaddr[2];
+	int curraddr;
+
+	curraddr=(addr[alen-2]<<8)+addr[alen-1];
+	i=len;
+	index=0;
+	do {
+		newaddr[1]=(curraddr & 0xff);
+		newaddr[0]=((curraddr>>8) & 0xff);
+		if(i>TRANSFER_LEN) {
+			newlen=TRANSFER_LEN;
+			i-=TRANSFER_LEN;
+		}
+		else {
+			newlen=i;
+			i=0;
+		}
+		short_spi_read (newaddr, 2, &buffer[index], newlen);
+		index+=newlen;
+		curraddr+=newlen;
+	}while(i);
+	return (len);
+}
+
+/****************************************************************************
+ *  Function:    spi_xfer
+ **************************************************************************** */
+ssize_t spi_xfer (size_t count)
+{
+	volatile immap_t *immr;
+	volatile qsmcm5xx_t *qsmcm;
+	int i;
+	int tm;
+	ushort status;
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
+	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+	DPRINT (("*** spi_xfer entered count %d***\n",count));
+
+	/* Set CS for device */
+	for(i=0;i<(count-1);i++)
+		qsmcm->qsmcm_comdram[i] = 0x80 | CONFIG_SYS_SPI_CS_ACT;  /* CS3 is connected to the SPI EEPROM */
+
+	qsmcm->qsmcm_comdram[i] = CONFIG_SYS_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
+	qsmcm->qsmcm_spcr2=((count-1)&0x1F)<<8;
+
+	DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", count));
+
+	qsmcm->qsmcm_spsr=0xE0; /* clear all flags */
+
+	/* start spi transfer */
+	DPRINT (("*** spi_xfer: Performing transfer ...\n"));
+	qsmcm->qsmcm_spcr1 |= 0x8000;		/* Start transmit */
+
+	/* --------------------------------
+	 * Wait for SPI transmit to get out
+	 * or time out (1 second = 1000 ms)
+	 * -------------------------------- */
+	for (tm=0; tm<1000; ++tm) {
+		status=qsmcm->qsmcm_spcr1;
+		if((status & 0x8000)==0)
+			break;
+		udelay (1000);
+	}
+	if (tm >= 1000) {
+		printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
+	}
+#ifdef	DEBUG
+	printf ("\nspi_xfer: txbuf after xfer\n");
+	memdump ((void *) qsmcm->qsmcm_tranram, 32);	/* dump of txbuf before transmit */
+	printf ("spi_xfer: rxbuf after xfer\n");
+	memdump ((void *) qsmcm->qsmcm_recram, 32);	/* dump of rxbuf after transmit */
+	printf ("\nspi_xfer: commbuf after xfer\n");
+	memdump ((void *) qsmcm->qsmcm_comdram, 32);	/* dump of txbuf before transmit */
+	printf ("\n");
+#endif
+
+	return count;
+}
+
+#endif	/* CONFIG_SPI  */
diff --git a/arch/ppc/cpu/mpc5xx/start.S b/arch/ppc/cpu/mpc5xx/start.S
new file mode 100644
index 0000000..0af879e
--- /dev/null
+++ b/arch/ppc/cpu/mpc5xx/start.S
@@ -0,0 +1,576 @@
+/*
+ *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
+ *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ *  Copyright (C) 2000, 2001, 2002 Wolfgang Denk <wd@denx.de>
+ *  Copyright (C) 2003  Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * File:		start.S
+ *
+ * Discription:		startup code
+ *
+ */
+
+#include <config.h>
+#include <mpc5xx.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define CONFIG_5xx 1		/* needed for Linux kernel header files */
+#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <linux/config.h>
+#include <asm/processor.h>
+
+#ifndef  CONFIG_IDENT_STRING
+#define  CONFIG_IDENT_STRING ""
+#endif
+
+/* We don't have a MMU.
+*/
+#undef	MSR_KERNEL
+#define MSR_KERNEL ( MSR_ME | MSR_RI )		/* Machine Check and Recoverable Interr. */
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+	START_GOT
+	GOT_ENTRY(_GOT2_TABLE_)
+	GOT_ENTRY(_FIXUP_TABLE_)
+
+	GOT_ENTRY(_start)
+	GOT_ENTRY(_start_of_vectors)
+	GOT_ENTRY(_end_of_vectors)
+	GOT_ENTRY(transfer_to_handler)
+
+	GOT_ENTRY(__init_end)
+	GOT_ENTRY(_end)
+	GOT_ENTRY(__bss_start)
+	END_GOT
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+	.text
+	.long	0x27051956			/* U-Boot Magic Number */
+	.globl	version_string
+version_string:
+	.ascii U_BOOT_VERSION
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+	.ascii CONFIG_IDENT_STRING, "\0"
+
+	. = EXC_OFF_SYS_RESET
+	.globl	_start
+_start:
+	mfspr	r3, 638
+	li	r4, CONFIG_SYS_ISB			/* Set ISB bit */
+	or	r3, r3, r4
+	mtspr	638, r3
+	li	r21, BOOTFLAG_COLD		/* Normal Power-On: Boot from FLASH	*/
+	b	boot_cold
+
+	. = EXC_OFF_SYS_RESET + 0x20
+
+	.globl	_start_warm
+_start_warm:
+	li	r21, BOOTFLAG_WARM		/* Software reboot */
+	b	boot_warm
+
+boot_cold:
+boot_warm:
+
+	/* Initialize machine status; enable machine check interrupt		*/
+	/*----------------------------------------------------------------------*/
+	li	r3, MSR_KERNEL			/* Set ME, RI flags */
+	mtmsr	r3
+	mtspr	SRR1, r3			/* Make SRR1 match MSR */
+
+	/* Initialize debug port registers					*/
+	/*----------------------------------------------------------------------*/
+	xor	r0, r0, r0			/* Clear R0 */
+	mtspr	LCTRL1, r0			/* Initialize debug port regs */
+	mtspr	LCTRL2, r0
+	mtspr	COUNTA, r0
+	mtspr	COUNTB, r0
+
+#if defined(CONFIG_PATI)
+	/* the external flash access on PATI fails if programming the PLL to 40MHz.
+	 * Copy the PLL programming code to the internal RAM and execute it
+	 *----------------------------------------------------------------------*/
+	lis	r3, CONFIG_SYS_MONITOR_BASE@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
+	addi	r3, r3, pll_prog_code_start - _start + EXC_OFF_SYS_RESET
+
+	lis	r4, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
+	mtlr	r4
+	addis	r5,0,0x0
+	ori	r5,r5,((pll_prog_code_end - pll_prog_code_start) >>2)
+	mtctr	r5
+	addi	r3, r3, -4
+	addi	r4, r4, -4
+0:
+	lwzu	r0,4(r3)
+	stwu	r0,4(r4)
+	bdnz	0b                /* copy loop */
+	blrl
+#endif
+
+	/*
+	 * Calculate absolute address in FLASH and jump there
+	 *----------------------------------------------------------------------*/
+
+	lis	r3, CONFIG_SYS_MONITOR_BASE@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
+	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
+	mtlr	r3
+	blr
+
+in_flash:
+
+	/* Initialize some SPRs that are hard to access from C			*/
+	/*----------------------------------------------------------------------*/
+
+	lis     r3, CONFIG_SYS_IMMR@h			/* Pass IMMR as arg1 to C routine */
+	lis	r2, CONFIG_SYS_INIT_SP_ADDR@h
+	ori	r1, r2, CONFIG_SYS_INIT_SP_ADDR@l	/* Set up the stack in internal SRAM */
+	/* Note: R0 is still 0 here */
+	stwu	r0, -4(r1)			/* Clear final stack frame so that	*/
+	stwu	r0, -4(r1)			/* stack backtraces terminate cleanly	*/
+
+	/*
+	 * Disable serialized ifetch and show cycles
+	 * (i.e. set processor to normal mode) for maximum
+	 * performance.
+	 */
+
+	li	r2, 0x0007
+	mtspr	ICTRL, r2
+
+	/* Set up debug mode entry */
+
+	lis	r2, CONFIG_SYS_DER@h
+	ori	r2, r2, CONFIG_SYS_DER@l
+	mtspr	DER, r2
+
+	/* Let the C-code set up the rest					*/
+	/*									*/
+	/* Be careful to keep code relocatable !				*/
+	/*----------------------------------------------------------------------*/
+
+	GET_GOT			/* initialize GOT access			*/
+
+	/* r3: IMMR */
+	bl	cpu_init_f	/* run low-level CPU init code     (from Flash)	*/
+
+	mr	r3, r21
+	/* r3: BOOTFLAG */
+	bl	board_init_f	/* run 1st part of board init code (from Flash) */
+
+
+	.globl	_start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+	STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception.  "Never" generated on the 860. */
+	STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception.  "Never" generated on the 860. */
+	STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+	. = 0x600
+Alignment:
+	EXCEPTION_PROLOG(SRR0, SRR1)
+	mfspr	r4,DAR
+	stw	r4,_DAR(r21)
+	mfspr	r5,DSISR
+	stw	r5,_DSISR(r21)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+	. = 0x700
+ProgramCheck:
+	EXCEPTION_PROLOG(SRR0, SRR1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+		MSR_KERNEL, COPY_EE)
+
+	/* FPU on MPC5xx available. We will use it later.
+	*/
+	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+	/* I guess we could implement decrementer, and may have
+	 * to someday for timekeeping.
+	 */
+	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+	STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+	/* On the MPC8xx, this is a software emulation interrupt.  It occurs
+	 * for all unimplemented and illegal instructions.
+	 */
+	STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
+	STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+	STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+	STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
+	STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
+
+	STD_EXCEPTION(0x1500, Reserved5, UnknownException)
+	STD_EXCEPTION(0x1600, Reserved6, UnknownException)
+	STD_EXCEPTION(0x1700, Reserved7, UnknownException)
+	STD_EXCEPTION(0x1800, Reserved8, UnknownException)
+	STD_EXCEPTION(0x1900, Reserved9, UnknownException)
+	STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
+	STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
+
+	STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
+	STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
+	STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
+	STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
+
+
+	.globl	_end_of_vectors
+_end_of_vectors:
+
+
+	. = 0x2000
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+	.globl	transfer_to_handler
+transfer_to_handler:
+	stw	r22,_NIP(r21)
+	lis	r22,MSR_POW@h
+	andc	r23,r23,r22
+	stw	r23,_MSR(r21)
+	SAVE_GPR(7, r21)
+	SAVE_4GPRS(8, r21)
+	SAVE_8GPRS(12, r21)
+	SAVE_8GPRS(24, r21)
+	mflr	r23
+	andi.	r24,r23,0x3f00		/* get vector offset */
+	stw	r24,TRAP(r21)
+	li	r22,0
+	stw	r22,RESULT(r21)
+	mtspr	SPRG2,r22		/* r1 is now kernel sp */
+	lwz	r24,0(r23)		/* virtual address of handler */
+	lwz	r23,4(r23)		/* where to go when done */
+	mtspr	SRR0,r24
+	mtspr	SRR1,r20
+	mtlr	r23
+	SYNC
+	rfi				/* jump to handler, enable MMU */
+
+int_return:
+	mfmsr	r28			/* Disable interrupts */
+	li	r4,0
+	ori	r4,r4,MSR_EE
+	andc	r28,r28,r4
+	SYNC				/* Some chip revs need this... */
+	mtmsr	r28
+	SYNC
+	lwz	r2,_CTR(r1)
+	lwz	r0,_LINK(r1)
+	mtctr	r2
+	mtlr	r0
+	lwz	r2,_XER(r1)
+	lwz	r0,_CCR(r1)
+	mtspr	XER,r2
+	mtcrf	0xFF,r0
+	REST_10GPRS(3, r1)
+	REST_10GPRS(13, r1)
+	REST_8GPRS(23, r1)
+	REST_GPR(31, r1)
+	lwz	r2,_NIP(r1)		/* Restore environment */
+	lwz	r0,_MSR(r1)
+	mtspr	SRR0,r2
+	mtspr	SRR1,r0
+	lwz	r0,GPR0(r1)
+	lwz	r2,GPR2(r1)
+	lwz	r1,GPR1(r1)
+	SYNC
+	rfi
+
+
+/*
+ * unsigned int get_immr (unsigned int mask)
+ *
+ * return (mask ? (IMMR & mask) : IMMR);
+ */
+	.globl	get_immr
+get_immr:
+	mr	r4,r3		/* save mask */
+	mfspr	r3, IMMR	/* IMMR */
+	cmpwi	0,r4,0		/* mask != 0 ? */
+	beq	4f
+	and	r3,r3,r4	/* IMMR & mask */
+4:
+	blr
+
+	.globl get_pvr
+get_pvr:
+	mfspr	r3, PVR
+	blr
+
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+	.globl	relocate_code
+relocate_code:
+	mr	r1,  r3		/* Set new stack pointer in SRAM	*/
+	mr	r9,  r4		/* Save copy of global data pointer in SRAM */
+	mr	r10, r5		/* Save copy of monitor destination Address in SRAM */
+
+	GET_GOT
+	mr	r3,  r5				/* Destination Address	*/
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
+	lwz	r5, GOT(__init_end)
+	sub	r5, r5, r4
+
+	/*
+	 * Fix GOT pointer:
+	 *
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+	 *
+	 * Offset:
+	 */
+	sub	r15, r10, r4
+
+	/* First our own GOT */
+	add	r12, r12, r15
+	/* the the one used by the C code */
+	add	r30, r30, r15
+
+	/*
+	 * Now relocate code
+	 */
+
+	cmplw	cr1,r3,r4
+	addi	r0,r5,3
+	srwi.	r0,r0,2
+	beq	cr1,4f		/* In place copy is not necessary	*/
+	beq	4f		/* Protect against 0 count		*/
+	mtctr	r0
+	bge	cr1,2f
+
+	la	r8,-4(r4)
+	la	r7,-4(r3)
+1:	lwzu	r0,4(r8)
+	stwu	r0,4(r7)
+	bdnz	1b
+	b	4f
+
+2:	slwi	r0,r0,2
+	add	r8,r4,r0
+	add	r7,r3,r0
+3:	lwzu	r0,-4(r8)
+	stwu	r0,-4(r7)
+	bdnz	3b
+
+4:	sync
+	isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+	mtlr	r0
+	blr
+
+in_ram:
+
+	/*
+	 * Relocation Function, r12 point to got2+0x8000
+	 *
+	 * Adjust got2 pointers, no need to check for 0, this code
+	 * already puts a few entries in the table.
+	 */
+	li	r0,__got2_entries@sectoff@l
+	la	r3,GOT(_GOT2_TABLE_)
+	lwz	r11,GOT(_GOT2_TABLE_)
+	mtctr	r0
+	sub	r11,r3,r11
+	addi	r3,r3,-4
+1:	lwzu	r0,4(r3)
+	cmpwi	r0,0
+	beq-	2f
+	add	r0,r0,r11
+	stw	r0,0(r3)
+2:	bdnz	1b
+
+	/*
+	 * Now adjust the fixups and the pointers to the fixups
+	 * in case we need to move ourselves again.
+	 */
+	li	r0,__fixup_entries@sectoff@l
+	lwz	r3,GOT(_FIXUP_TABLE_)
+	cmpwi	r0,0
+	mtctr	r0
+	addi	r3,r3,-4
+	beq	4f
+3:	lwzu	r4,4(r3)
+	lwzux	r0,r4,r11
+	add	r0,r0,r11
+	stw	r10,0(r3)
+	stw	r0,0(r4)
+	bdnz	3b
+4:
+clear_bss:
+	/*
+	 * Now clear BSS segment
+	 */
+	lwz	r3,GOT(__bss_start)
+	lwz	r4,GOT(_end)
+	cmplw	0, r3, r4
+	beq	6f
+
+	li	r0, 0
+5:
+	stw	r0, 0(r3)
+	addi	r3, r3, 4
+	cmplw	0, r3, r4
+	bne	5b
+6:
+
+	mr	r3, r9		/* Global Data pointer		*/
+	mr	r4, r10		/* Destination Address		*/
+	bl	board_init_r
+
+	/*
+	 * Copy exception vector code to low memory
+	 *
+	 * r3: dest_addr
+	 * r7: source address, r8: end address, r9: target address
+	 */
+	.globl	trap_init
+trap_init:
+	mflr	r4			/* save link register		*/
+	GET_GOT
+	lwz	r7, GOT(_start)
+	lwz	r8, GOT(_end_of_vectors)
+
+	li	r9, 0x100		/* reset vector always at 0x100 */
+
+	cmplw	0, r7, r8
+	bgelr				/* return if r7>=r8 - just in case */
+1:
+	lwz	r0, 0(r7)
+	stw	r0, 0(r9)
+	addi	r7, r7, 4
+	addi	r9, r9, 4
+	cmplw	0, r7, r8
+	bne	1b
+
+	/*
+	 * relocate `hdlr' and `int_return' entries
+	 */
+	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+	li	r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	2b
+
+	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+	bl	trap_reloc
+
+	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+	bl	trap_reloc
+
+	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+	li	r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	3b
+
+	li	r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	4b
+
+	mtlr	r4			/* restore link register	*/
+	blr
+
+#if defined(CONFIG_PATI)
+/* Program the PLL */
+pll_prog_code_start:
+	lis	r4, (CONFIG_SYS_IMMR + 0x002fc384)@h
+	ori	r4, r4, (CONFIG_SYS_IMMR + 0x002fc384)@l
+	lis	r3, (0x55ccaa33)@h
+	ori	r3, r3, (0x55ccaa33)@l
+	stw	r3, 0(r4)
+	lis	r4, (CONFIG_SYS_IMMR + 0x002fc284)@h
+	ori	r4, r4, (CONFIG_SYS_IMMR + 0x002fc284)@l
+	lis	r3, CONFIG_SYS_PLPRCR@h
+	ori	r3, r3, CONFIG_SYS_PLPRCR@l
+	stw	r3, 0(r4)
+	addis	r3,0,0x0
+	ori	r3,r3,0xA000
+	mtctr	r3
+..spinlp:
+  bdnz    ..spinlp                /* spin loop */
+	blr
+pll_prog_code_end:
+	nop
+	blr
+#endif
diff --git a/arch/ppc/cpu/mpc5xx/traps.c b/arch/ppc/cpu/mpc5xx/traps.c
new file mode 100644
index 0000000..6882c21
--- /dev/null
+++ b/arch/ppc/cpu/mpc5xx/traps.c
@@ -0,0 +1,227 @@
+/*
+ * linux/arch/ppc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+#if defined(CONFIG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+*/
+#define END_OF_MEM	0x0001000
+
+
+/*
+ * Print stack backtrace
+ */
+void print_backtrace(unsigned long *sp)
+{
+	int cnt = 0;
+	unsigned long i;
+
+	printf("Call backtrace: ");
+	while (sp) {
+		if ((uint)sp > END_OF_MEM)
+			break;
+
+		i = sp[1];
+		if (cnt++ % 7 == 0)
+			printf("\n");
+		printf("%08lX ", i);
+		if (cnt > 32) break;
+		sp = (unsigned long *)*sp;
+	}
+	printf("\n");
+}
+
+/*
+ * Print current registers
+ */
+void show_regs(struct pt_regs * regs)
+{
+	int i;
+	printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+	       regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+	printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+	       regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+	       regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+	       regs->msr&MSR_IR ? 1 : 0,
+	       regs->msr&MSR_DR ? 1 : 0);
+
+	printf("\n");
+	for (i = 0;  i < 32;  i++) {
+		if ((i % 8) == 0)
+		{
+			printf("GPR%02d: ", i);
+		}
+
+		printf("%08lX ", regs->gpr[i]);
+		if ((i % 8) == 7)
+		{
+			printf("\n");
+		}
+	}
+}
+
+
+/*
+ * General exception handler routine
+ */
+void _exception(int signr, struct pt_regs *regs)
+{
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+/*
+ * Machine check exception handler routine
+ */
+void MachineCheckException(struct pt_regs *regs)
+{
+	unsigned long fixup;
+
+	/* Probing PCI using config cycles cause this exception
+	 * when a device is not present.  Catch it and return to
+	 * the PCI exception handler.
+	 */
+	if ((fixup = search_exception_table(regs->nip)) != 0) {
+		regs->nip = fixup;
+		return;
+	}
+
+#if defined(CONFIG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+		return;
+#endif
+
+	printf("Machine check in kernel mode.\n");
+	printf("Caused by (from msr): ");
+	printf("regs %p ",regs);
+	switch( regs->msr & 0x000F0000) {
+	case (0x80000000>>12):
+		printf("Machine check signal\n");
+		break;
+	case (0x80000000>>13):
+		printf("Transfer error ack signal\n");
+		break;
+	case (0x80000000>>14):
+		printf("Data parity signal\n");
+		break;
+	case (0x80000000>>15):
+		printf("Address parity signal\n");
+		break;
+	default:
+		printf("Unknown values in msr\n");
+	}
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("machine check");
+}
+
+/*
+ * Alignment exception handler routine
+ */
+void AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+		return;
+#endif
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Alignment Exception");
+}
+
+/*
+ * Program check exception handler routine
+ */
+void ProgramCheckException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+		return;
+#endif
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Program Check Exception");
+}
+
+/*
+ * Software emulation exception handler routine
+ */
+void SoftEmuException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+		return;
+#endif
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Software Emulation Exception");
+}
+
+
+/*
+ * Unknown exception handler routine
+ */
+void UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+		return;
+#endif
+	printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+	       regs->nip, regs->msr, regs->trap);
+	_exception(0, regs);
+}
+
+/*
+ * Debug exception handler routine
+ */
+void DebugException(struct pt_regs *regs)
+{
+	printf("Debugger trap at @ %lx\n", regs->nip );
+	show_regs(regs);
+#if defined(CONFIG_CMD_BEDBUG)
+	do_bedbug_breakpoint( regs );
+#endif
+}
diff --git a/arch/ppc/cpu/mpc5xx/u-boot.lds b/arch/ppc/cpu/mpc5xx/u-boot.lds
new file mode 100644
index 0000000..55190c7
--- /dev/null
+++ b/arch/ppc/cpu/mpc5xx/u-boot.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2001	Wolfgang Denk, DENX Software Engineering, wd@denx.de
+ * (C) Copyright 2003	Martin Winistoerfer, martinwinistoerfer@gmx.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    arch/ppc/cpu/mpc5xx/start.o	(.text)
+
+    *(.text)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.eh_frame)
+    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+/*   . = env_start;
+	.ppcenv	:
+	{
+		common/env_embedded.o (.ppcenv)
+	}
+*/
+}