ppc: Zap Hymod board

Remove this board as this is the only one last user of eeprom_probe(),
which is pretty non-standard stuff.

This patch also removes all the PHP, SQL and CSS stuff from U-Boot,
which probably makes U-Boot a bit less IoT ;-)

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>

6 files changed, 2 insertions, 67 deletions

diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig
index 41e4e5f..7f246ff 100644
--- a/arch/powerpc/cpu/mpc8260/Kconfig
+++ b/arch/powerpc/cpu/mpc8260/Kconfig
@@ -28,9 +28,6 @@ config TARGET_EP82XXM
 config TARGET_GW8260
 	bool "Support gw8260"
 
-config TARGET_HYMOD
-	bool "Support hymod"
-
 config TARGET_IPHASE4539
 	bool "Support IPHASE4539"
 
@@ -78,7 +75,6 @@ source "board/ep82xxm/Kconfig"
 source "board/freescale/mpc8266ads/Kconfig"
 source "board/funkwerk/vovpn-gw/Kconfig"
 source "board/gw8260/Kconfig"
-source "board/hymod/Kconfig"
 source "board/ids/ids8247/Kconfig"
 source "board/iphase4539/Kconfig"
 source "board/keymile/km82xx/Kconfig"
diff --git a/arch/powerpc/cpu/mpc8260/ether_fcc.c b/arch/powerpc/cpu/mpc8260/ether_fcc.c
index d93a991..f9f15b5 100644
--- a/arch/powerpc/cpu/mpc8260/ether_fcc.c
+++ b/arch/powerpc/cpu/mpc8260/ether_fcc.c
@@ -645,32 +645,7 @@ eth_loopback_test (void)
 
 	/* 28.9 - (1-2): ioports have been set up already */
 
-#if defined(CONFIG_HYMOD)
-	/*
-	 * Attention: this is board-specific
-	 * 0, FCC1
-	 * 1, FCC2
-	 * 2, FCC3
-	 */
-#       define FCC_START_LOOP 0
-#       define FCC_END_LOOP   2
-
-	/*
-	 * Attention: this is board-specific
-	 * - FCC1 Rx-CLK is CLK10
-	 * - FCC1 Tx-CLK is CLK11
-	 * - FCC2 Rx-CLK is CLK13
-	 * - FCC2 Tx-CLK is CLK14
-	 * - FCC3 Rx-CLK is CLK15
-	 * - FCC3 Tx-CLK is CLK16
-	 */
-
-	/* 28.9 - (3): connect FCC's tx and rx clocks */
-	immr->im_cpmux.cmx_uar = 0;
-	immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
-	    CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
-	    CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
-#elif defined(CONFIG_SACSng)
+#if defined(CONFIG_SACSng)
 	/*
 	 * Attention: this is board-specific
 	 * 1, FCC2
diff --git a/arch/powerpc/cpu/mpc8260/interrupts.c b/arch/powerpc/cpu/mpc8260/interrupts.c
index 30125a7..41d2c04 100644
--- a/arch/powerpc/cpu/mpc8260/interrupts.c
+++ b/arch/powerpc/cpu/mpc8260/interrupts.c
@@ -142,15 +142,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
 	immr->im_intctl.ic_sipnrh = 0xffffffff;
 	immr->im_intctl.ic_sipnrl = 0xffffffff;
 
-#ifdef CONFIG_HYMOD
-	/*
-	 * ensure all external interrupt sources default to trigger on
-	 * high-to-low transition (i.e. edge triggered active low)
-	 */
-	immr->im_intctl.ic_siexr = -1;
-#endif
-
-	return (0);
+	return 0;
 }
 
 /****************************************************************************/
diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S
index d7eaf13..5f1e174 100644
--- a/arch/powerpc/cpu/mpc8260/start.S
+++ b/arch/powerpc/cpu/mpc8260/start.S
@@ -48,9 +48,6 @@
 	GOT_ENTRY(__init_end)
 	GOT_ENTRY(__bss_end)
 	GOT_ENTRY(__bss_start)
-#if defined(CONFIG_HYMOD)
-	GOT_ENTRY(environment)
-#endif
 	END_GOT
 
 /*
@@ -878,18 +875,7 @@ clear_bss:
 	 * Now clear BSS segment
 	 */
 	lwz	r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
-	/*
-	 * For HYMOD - the environment is the very last item in flash.
-	 * The real .bss stops just before environment starts, so only
-	 * clear up to that point.
-	 *
-	 * taken from mods for FADS board
-	 */
-	lwz	r4,GOT(environment)
-#else
 	lwz	r4,GOT(__bss_end)
-#endif
 
 	cmplw	0, r3, r4
 	beq	6f
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S
index 36724e5..af75c63 100644
--- a/arch/powerpc/cpu/mpc83xx/start.S
+++ b/arch/powerpc/cpu/mpc83xx/start.S
@@ -958,18 +958,7 @@ clear_bss:
 	 * Now clear BSS segment
 	 */
 	lwz	r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
-	/*
-	 * For HYMOD - the environment is the very last item in flash.
-	 * The real .bss stops just before environment starts, so only
-	 * clear up to that point.
-	 *
-	 * taken from mods for FADS board
-	 */
-	lwz	r4,GOT(environment)
-#else
 	lwz	r4,GOT(__bss_end)
-#endif
 
 	cmplw	0, r3, r4
 	beq	6f
diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h
index e1b566f..a61e998 100644
--- a/arch/powerpc/include/asm/u-boot.h
+++ b/arch/powerpc/include/asm/u-boot.h
@@ -77,9 +77,6 @@ typedef struct bd_info {
 	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
 	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
 #endif
-#if defined(CONFIG_HYMOD)
-	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
-#endif
 
 #ifdef CONFIG_HAS_ETH1
 	unsigned char   bi_enet1addr[6];	/* OLD: see README.enetaddr */