powerpc/85xx: Enhance get_sys_info() to check clocking mode

T1040 and it's variants provide "Single Oscillator Source" Reference Clock Mode.

In this mode, single onboard oscillator(DIFF_SYSCLK) can provide the reference clock
(100MHz) to the following PLLs:
• Platform PLL
• Core PLLs
• USB PLL
• DDR PLL, etc

The cfg_eng_use0 of porsr1 register identifies whether the SYSCLK (single-ended) or
DIFF_SYSCLK (differential) is selected as the clock input to the chip.

get_sys_info has been enhanced to add the diff_sysclk so that the
various drivers can be made aware of ths diff sysclk configuration and
act accordingly.

Other changes:
-single_src to ddr_refclk_sel, as it is use for checking ddr reference clock
-Removed the print of single_src from get_sys_info as this will be
-printed whenever somebody calls get_sys_info which is not appropriate.
-Add print of single_src in checkcpu as it is called only once during initialization

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Vijay Rai <vijay.rai@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

3 files changed, 24 insertions, 8 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 2c8126c..12e8e10 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -130,6 +130,11 @@ int checkcpu (void)
 
 	get_sys_info(&sysinfo);
 
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+	if (sysinfo.diff_sysclk == 1)
+		puts("Single Source Clock Configuration\n");
+#endif
+
 	puts("Clock Configuration:");
 	for_each_cpu(i, core, nr_cores, mask) {
 		if (!(i & 3))
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 35dfb0a..2d6c668 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -74,28 +74,33 @@ void get_sys_info(sys_info_t *sys_info)
 	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
 	uint mem_pll_rat;
-#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
-	uint single_src;
-#endif
 
 	sys_info->freq_systembus = sysclk;
 #ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+	uint ddr_refclk_sel;
+	unsigned int porsr1_sys_clk;
+	porsr1_sys_clk = in_be32(&gur->porsr1) >> FSL_DCFG_PORSR1_SYSCLK_SHIFT
+						& FSL_DCFG_PORSR1_SYSCLK_MASK;
+	if (porsr1_sys_clk == FSL_DCFG_PORSR1_SYSCLK_DIFF)
+		sys_info->diff_sysclk = 1;
+	else
+		sys_info->diff_sysclk = 0;
+
 	/*
 	 * DDR_REFCLK_SEL rcw bit is used to determine if DDR PLLS
 	 * are driven by separate DDR Refclock or single source
 	 * differential clock.
 	 */
-	single_src = (in_be32(&gur->rcwsr[5]) >>
+	ddr_refclk_sel = (in_be32(&gur->rcwsr[5]) >>
 		      FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_SHIFT) &
 		      FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_MASK;
 	/*
-	 * For single source clocking, both ddrclock and syclock
+	 * For single source clocking, both ddrclock and sysclock
 	 * are driven by differential sysclock.
 	 */
-	if (single_src == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK) {
-		printf("Single Source Clock Configuration\n");
+	if (ddr_refclk_sel == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK)
 		sys_info->freq_ddrbus = CONFIG_SYS_CLK_FREQ;
-	} else
+	else
 #endif
 #ifdef CONFIG_DDR_CLK_FREQ
 		sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index be54920..741b861 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1583,6 +1583,12 @@ typedef struct cpc_corenet {
 typedef struct ccsr_gur {
 	u32	porsr1;		/* POR status 1 */
 	u32	porsr2;		/* POR status 2 */
+#ifdef	CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+#define	FSL_DCFG_PORSR1_SYSCLK_SHIFT	15
+#define	FSL_DCFG_PORSR1_SYSCLK_MASK	0x1
+#define	FSL_DCFG_PORSR1_SYSCLK_SINGLE_ENDED	0x1
+#define	FSL_DCFG_PORSR1_SYSCLK_DIFF	0x0
+#endif
 	u8	res_008[0x20-0x8];
 	u32	gpporcr1;	/* General-purpose POR configuration */
 	u32	gpporcr2;	/* General-purpose POR configuration 2 */