powerpc/85xx: Add P5040 processor support

Add support for the Freescale P5040 SOC, which is similar to the P5020.
Features of the P5040 are:

Four P5040 single-threaded e5500 cores built
    Up to 2.4 GHz with 64-bit ISA support
    Three levels of instruction: user, supervisor, hypervisor
CoreNet platform cache (CPC)
    2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric
Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
        support Up to 1600MT/s
    Memory pre-fetch engine
DPAA incorporating acceleration for the following functions
    Packet parsing, classification, and distribution (FMAN)
    Queue management for scheduling, packet sequencing and
    congestion management (QMAN)
    Hardware buffer management for buffer allocation and
    de-allocation (BMAN)
    Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes
    20 lanes at up to 5 Gbps
    Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces
    Two 10 Gbps Ethernet MACs
    Ten 1 Gbps Ethernet MACs
High-speed peripheral interfaces
    Two PCI Express 2.0/3.0 controllers
Additional peripheral interfaces
    Two serial ATA (SATA 2.0) controllers
    Two high-speed USB 2.0 controllers with integrated PHY
    Enhanced secure digital host controller (SD/MMC/eMMC)
    Enhanced serial peripheral interface (eSPI)
    Two I2C controllers
    Four UARTs
    Integrated flash controller supporting NAND and NOR flash
DMA
    Dual four channel
Support for hardware virtualization and partitioning enforcement
    Extra privileged level for hypervisor support
QorIQ Trust Architecture 1.1
    Secure boot, secure debug, tamper detection, volatile key storage

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

10 files changed, 372 insertions, 0 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 33e93c8..aad50f3 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -66,6 +66,7 @@ COBJS-$(CONFIG_PPC_P2041)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P3041)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P4080)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P5020)	+= ddr-gen3.o
+COBJS-$(CONFIG_PPC_P5040)	+= ddr-gen3.o
 COBJS-$(CONFIG_BSC9131)		+= ddr-gen3.o
 
 COBJS-$(CONFIG_CPM2)	+= ether_fcc.o
@@ -80,6 +81,7 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o
 COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
 COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
+COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o
 
 COBJS-$(CONFIG_QE)	+= qe_io.o
 COBJS-$(CONFIG_CPM2)	+= serial_scc.o
@@ -110,6 +112,7 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o
 COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
 COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
+COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
 
 COBJS	= $(COBJS-y)
 COBJS	+= cpu.o
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 2a68060..e6b1b1b 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -92,10 +92,17 @@ static const struct {
 	{ 17, 163, FSL_SRDS_BANK_2 },
 	{ 18, 164, FSL_SRDS_BANK_2 },
 	{ 19, 165, FSL_SRDS_BANK_2 },
+#ifdef CONFIG_PPC_P4080
 	{ 20, 170, FSL_SRDS_BANK_3 },
 	{ 21, 171, FSL_SRDS_BANK_3 },
 	{ 22, 172, FSL_SRDS_BANK_3 },
 	{ 23, 173, FSL_SRDS_BANK_3 },
+#else
+	{ 20, 166, FSL_SRDS_BANK_3 },
+	{ 21, 167, FSL_SRDS_BANK_3 },
+	{ 22, 168, FSL_SRDS_BANK_3 },
+	{ 23, 169, FSL_SRDS_BANK_3 },
+#endif
 };
 
 int serdes_get_lane_idx(int lane)
@@ -493,6 +500,9 @@ void fsl_serdes_init(void)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	int cfg;
 	serdes_corenet_t *srds_regs;
+#ifdef CONFIG_PPC_P5040
+	serdes_corenet_t *srds2_regs;
+#endif
 	int lane, bank, idx;
 	int have_bank[SRDS_MAX_BANK] = {};
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
@@ -574,6 +584,34 @@ void fsl_serdes_init(void)
 		}
 	}
 
+#ifdef CONFIG_PPC_P5040
+	/*
+	 * Lanes on bank 4 on P5040 are commented-out, but for some SERDES
+	 * protocols, these lanes are routed to SATA.  We use serdes_prtcl_map
+	 * to decide whether a protocol is supported on a given lane, so SATA
+	 * will be identified as not supported, and therefore not initialized.
+	 * So for protocols which use SATA on bank4, we add SATA support in
+	 * serdes_prtcl_map.
+	 */
+	switch (cfg) {
+	case 0x0:
+	case 0x1:
+	case 0x2:
+	case 0x3:
+	case 0x4:
+	case 0x5:
+	case 0x6:
+	case 0x7:
+		serdes_prtcl_map |= 1 << SATA1 | 1 << SATA2;
+		break;
+	default:
+		srds2_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR;
+
+		/* We don't need bank 4, so power it down */
+		setbits_be32(&srds2_regs->bank[0].rstctl, SRDS_RSTCTL_SDPD);
+	}
+#endif
+
 	soc_serdes_init();
 
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
@@ -617,6 +655,38 @@ void fsl_serdes_init(void)
 		}
 	}
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004699
+	/*
+	 * To avoid the situation that resulted in the P4080 erratum
+	 * SERDES-8, a given SerDes bank will use the PLLs from the previous
+	 * bank if one of the PLL frequencies is a multiple of the other.  For
+	 * instance, if bank 3 is running at 2.5GHz and bank 2 is at 1.25GHz,
+	 * then bank 3 will use bank 2's PLL.  P5040 Erratum A-004699 says
+	 * that, in this situation, lane synchronization is not initiated.  So
+	 * when we detect a bank with a "borrowed" PLL, we have to manually
+	 * initiate lane synchronization.
+	 */
+	for (bank = FSL_SRDS_BANK_2; bank <= FSL_SRDS_BANK_3; bank++) {
+		/* Determine the first lane for this bank */
+		unsigned int lane;
+
+		for (lane = 0; lane < SRDS_MAX_LANES; lane++)
+			if (lanes[lane].bank == bank)
+				break;
+		idx = lanes[lane].idx;
+
+		/*
+		 * Check if the PLL for the bank is borrowed.  The UOTHL
+		 * bit of the first lane will tell us that.
+		 */
+		if (in_be32(&srds_regs->lane[idx].gcr0) & SRDS_GCR0_UOTHL) {
+			/* Manually start lane synchronization */
+			setbits_be32(&srds_regs->bank[bank].pllcr0,
+				     SRDS_PLLCR0_PVCOCNT_EN);
+		}
+	}
+#endif
+
 #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) || defined (CONFIG_SYS_P4080_ERRATUM_SERDES9)
 	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
 		enum srds_prtcl lane_prtcl;
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
index f261351..c82060d 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
@@ -22,6 +22,11 @@
 #ifndef __FSL_CORENET_SERDES_H
 #define __FSL_CORENET_SERDES_H
 
+/*
+ * Note: For P5040, the fourth SerDes bank is on SerDes2, but U-boot currently
+ * only supports one SerDes controller.  For now, pretend that we have three
+ * banks and 18 lanes on the P5040.
+ */
 #define SRDS_MAX_LANES		18
 #define SRDS_MAX_BANK		3
 
diff --git a/arch/powerpc/cpu/mpc85xx/p5040_ids.c b/arch/powerpc/cpu/mpc85xx/p5040_ids.c
new file mode 100644
index 0000000..878ee3e
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p5040_ids.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+	/* dqrr liodn, frame data liodn, liodn off, sdest */
+	SET_QP_INFO(1, 2, 1, 0),
+	SET_QP_INFO(3, 4, 2, 1),
+	SET_QP_INFO(5, 6, 3, 2),
+	SET_QP_INFO(7, 8, 4, 3),
+	SET_QP_INFO(9, 10, 5, 0),
+	SET_QP_INFO(11, 12, 6, 1),
+	SET_QP_INFO(13, 14, 7, 2),
+	SET_QP_INFO(15, 16, 8, 3),
+	SET_QP_INFO(17, 18, 9, 0),	/* for now, set sdest to 0 */
+	SET_QP_INFO(19, 20, 10, 0),	/* for now, set sdest to 0 */
+};
+#endif
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_LIODN(31),
+	SET_BMAN_LIODN(32),
+#endif
+
+	SET_SDHC_LIODN(1, 64),
+
+	SET_USB_LIODN(1, "fsl-usb2-mph", 93),
+	SET_USB_LIODN(2, "fsl-usb2-dr", 94),
+
+	SET_SATA_LIODN(1, 95),
+	SET_SATA_LIODN(2, 96),
+
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 195),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 196),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 197),
+
+	SET_DMA_LIODN(1, 193),
+	SET_DMA_LIODN(2, 194),
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+	SET_FMAN_RX_1G_LIODN(1, 0, 6),
+	SET_FMAN_RX_1G_LIODN(1, 1, 7),
+	SET_FMAN_RX_1G_LIODN(1, 2, 8),
+	SET_FMAN_RX_1G_LIODN(1, 3, 9),
+	SET_FMAN_RX_1G_LIODN(1, 4, 10),
+	SET_FMAN_RX_10G_LIODN(1, 0, 11),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+struct liodn_id_table fman2_liodn_tbl[] = {
+	SET_FMAN_RX_1G_LIODN(2, 0, 12),
+	SET_FMAN_RX_1G_LIODN(2, 1, 13),
+	SET_FMAN_RX_1G_LIODN(2, 2, 14),
+	SET_FMAN_RX_1G_LIODN(2, 3, 15),
+	SET_FMAN_RX_1G_LIODN(2, 4, 16),
+	SET_FMAN_RX_10G_LIODN(2, 0, 17),
+};
+int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+#endif
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+	SET_SEC_JR_LIODN_ENTRY(0, 129, 130),
+	SET_SEC_JR_LIODN_ENTRY(1, 131, 132),
+	SET_SEC_JR_LIODN_ENTRY(2, 133, 134),
+	SET_SEC_JR_LIODN_ENTRY(3, 135, 136),
+	SET_SEC_RTIC_LIODN_ENTRY(a, 89),
+	SET_SEC_RTIC_LIODN_ENTRY(b, 90),
+	SET_SEC_RTIC_LIODN_ENTRY(c, 91),
+	SET_SEC_RTIC_LIODN_ENTRY(d, 92),
+	SET_SEC_DECO_LIODN_ENTRY(0, 139, 140),
+	SET_SEC_DECO_LIODN_ENTRY(1, 141, 142),
+	SET_SEC_DECO_LIODN_ENTRY(2, 143, 144),
+	SET_SEC_DECO_LIODN_ENTRY(3, 145, 146),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+struct liodn_id_table raide_liodn_tbl[] = {
+	SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60),
+	SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61),
+	SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62),
+	SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63),
+};
+int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(64, 101),
+#ifdef CONFIG_SYS_DPAA_FMAN
+	[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32),
+#endif
+#if (CONFIG_SYS_NUM_FMAN == 2)
+	[FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(160),
+#endif
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+	[FSL_HW_PORTAL_RAID_ENGINE]  = SET_LIODN_BASE_1(49),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c
new file mode 100644
index 0000000..890b88e
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet_serdes.h"
+
+/*
+ * Note: For P5040, the fourth SerDes bank (with two lanes) is on SerDes2, but
+ * U-boot only supports one SerDes controller.  Therefore, we ignore bank 4 in
+ * this table.  This works because most of the SerDes code is for errata
+ * work-arounds, and there are no P5040 errata that effect bank 4.
+ */
+
+static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
+	[0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2, */ },
+	[0x01] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+		SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1,
+		XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+		XAUI_FM2, /* SATA1, SATA2 */ },
+	[0x02] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM1_DTSEC3,
+		SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+		XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2,
+		XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+	[0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM2_DTSEC1,
+		SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3,
+		SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+		/* SATA1, SATA2 */ },
+	[0x04] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM2_DTSEC1,
+		SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3,
+		SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+		/* SATA1, SATA2 */ },
+	[0x05] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC3,
+		SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+		XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2,
+		XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+	[0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+	[0x07] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1,
+		SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1,
+		XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+		XAUI_FM2, /* SATA1, SATA2 */ },
+	[0x11] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+		AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2,
+		/* NONE, NONE */ },
+	[0x15] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+		AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1,
+		NONE, NONE, SATA1, SATA2, /* NONE, NONE */ },
+	[0x2a] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2,
+		AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2,
+		XAUI_FM2, XAUI_FM2, /* NONE, NONE */ },
+	[0x34] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA,
+		AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE,
+		NONE, SATA1, SATA2, /* NONE, NONE */ },
+	[0x35] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1,
+		XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2,
+		/* NONE, NONE */ },
+	[0x36] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA,
+		AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE,
+		NONE, SATA1, SATA2, /* NONE, NONE */ },
+};
+
+enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
+{
+	if (!serdes_lane_enabled(lane))
+		return NONE;
+
+	return serdes_cfg_tbl[cfg][lane];
+}
+
+int is_serdes_prtcl_valid(u32 prtcl)
+{
+	int i;
+
+	if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (serdes_cfg_tbl[prtcl][i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index abfeb26..6dd9e8d 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -112,6 +112,8 @@ void get_sys_info (sys_info_t * sysInfo)
 #define HWA_ASYNC_DIV	0x04000000
 #if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2)
 #define HWA_CC_PLL	1
+#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3)
+#define HWA_CC_PLL	2
 #elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4)
 #define HWA_CC_PLL	2
 #else
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 78a8f92..fb78784 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -73,6 +73,8 @@ struct cpu_type cpu_type_list [] = {
 	CPU_TYPE_ENTRY(P4080, P4080, 8),
 	CPU_TYPE_ENTRY(P5010, P5010, 1),
 	CPU_TYPE_ENTRY(P5020, P5020, 2),
+	CPU_TYPE_ENTRY(P5021, P5021, 2),
+	CPU_TYPE_ENTRY(P5040, P5040, 4),
 	CPU_TYPE_ENTRY(BSC9130, 9130, 1),
 	CPU_TYPE_ENTRY(BSC9131, 9131, 1),
 #elif defined(CONFIG_MPC86xx)
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 0013ba8..636bd5f 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -437,6 +437,35 @@
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
 
+#elif defined(CONFIG_PPC_P5040)
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
+#define CONFIG_MAX_CPUS			4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	3
+#define CONFIG_SYS_FSL_NUM_LAWS		32
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		2
+#define CONFIG_SYS_NUM_FM1_DTSEC	5
+#define CONFIG_SYS_NUM_FM1_10GEC	1
+#define CONFIG_SYS_NUM_FM2_DTSEC	5
+#define CONFIG_SYS_NUM_FM2_10GEC	1
+#define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
+#define CONFIG_SYS_FSL_TBCLK_DIV	16
+#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.4"
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_SYS_FSL_ERRATUM_USB138
+#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
+#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_ERRATUM_A004699
+#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC
+#define CONFIG_SYS_FSL_ERRATUM_A004510
+#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x10
+#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
+
 #elif defined(CONFIG_BSC9131)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_FSL_SDHC_V2_3
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 6c11178..7c35b41 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1761,6 +1761,7 @@ typedef struct ccsr_gur {
 #define FSL_CORENET_RCWSR5_DDR_SYNC		0x00000080
 #define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT		 7
 #define FSL_CORENET_RCWSR5_SRDS_EN		0x00002000
+#define FSL_CORENET_RCWSR5_SRDS2_EN		0x00001000
 #define FSL_CORENET_RCWSR6_BOOT_LOC	0x0f800000
 #define FSL_CORENET_RCWSRn_SRDS_LPD_B2		0x3c000000 /* bits 162..165 */
 #define FSL_CORENET_RCWSRn_SRDS_LPD_B3		0x003c0000 /* bits 170..173 */
@@ -1786,6 +1787,15 @@ typedef struct ccsr_gur {
 #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII		0x00100000
 #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE		0x00180000
 #endif
+#if defined(CONFIG_PPC_P5040)
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII        0x00000000
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII          0x00800000
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_NONE         0x00c00000
+#define FSL_CORENET_RCWSR11_EC2                 0x00180000 /* bits 363..364 */
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_RGMII        0x00000000
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII          0x00100000
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE         0x00180000
+#endif
 	u8	res18[192];
 	u32	scratchrw[4];	/* Scratch Read/Write */
 	u8	res19[240];
@@ -2395,6 +2405,7 @@ typedef struct serdes_corenet {
 #define SRDS_RSTCTL_SDPD	0x00000020
 		u32	pllcr0; /* PLL Control Register 0 */
 #define SRDS_PLLCR0_RFCK_SEL_MASK	0x30000000
+#define SRDS_PLLCR0_PVCOCNT_EN		0x02000000
 #define SRDS_PLLCR0_RFCK_SEL_100	0x00000000
 #define SRDS_PLLCR0_RFCK_SEL_125	0x10000000
 #define SRDS_PLLCR0_RFCK_SEL_156_25	0x20000000
@@ -2423,6 +2434,7 @@ typedef struct serdes_corenet {
 		u32	gcr0;	/* General Control Register 0 */
 #define SRDS_GCR0_RRST			0x00400000
 #define SRDS_GCR0_1STLANE		0x00010000
+#define SRDS_GCR0_UOTHL			0x00100000
 		u32	gcr1;	/* General Control Register 1 */
 #define SRDS_GCR1_REIDL_CTL_MASK	0x001f0000
 #define SRDS_GCR1_REIDL_CTL_PCIE	0x00100000
@@ -2627,6 +2639,7 @@ struct ccsr_rman {
 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET	0xE1000
 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET	0xE2000
 #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET	0xEA000
+#define CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET	0xEB000
 #define CONFIG_SYS_FSL_CPC_OFFSET		0x10000
 #define CONFIG_SYS_MPC85xx_DMA1_OFFSET		0x100000
 #define CONFIG_SYS_MPC85xx_DMA2_OFFSET		0x101000
@@ -2777,6 +2790,8 @@ struct ccsr_rman {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
 #define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_SERDES2_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET)
 #define CONFIG_SYS_MPC85xx_USB_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
 #define CONFIG_SYS_MPC85xx_USB1_PHY_ADDR \
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 36695e2..fd0160a 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1095,6 +1095,8 @@
 #define SVR_P4080	0x820000
 #define SVR_P5010	0x822100
 #define SVR_P5020	0x822000
+#define SVR_P5021	0X820500
+#define SVR_P5040	0x820400
 
 #define SVR_8610	0x80A000
 #define SVR_8641	0x809000