summaryrefslogtreecommitdiff
path: root/arch/powerpc
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.m@jp.panasonic.com>2014-04-04 15:25:09 +0900
committerTom Rini <trini@ti.com>2014-04-18 10:42:30 -0400
commit03f2ecc2cb28efeb35912710754d9857cdc05190 (patch)
treeed089958d1c21c5b8ac20def0911ec6c85a7c167 /arch/powerpc
parent8b043e6dc2e53743b0271debb6f506b95e788fd7 (diff)
downloadu-boot-imx-03f2ecc2cb28efeb35912710754d9857cdc05190.zip
u-boot-imx-03f2ecc2cb28efeb35912710754d9857cdc05190.tar.gz
u-boot-imx-03f2ecc2cb28efeb35912710754d9857cdc05190.tar.bz2
powerpc: remove MOUSSE board support
Enough time has passed since this board was moved to Orphan. Remove. - Remove board/mousse/* - Remove include/configs/MOUSSE.h - Clean-up defined(CONFIG_MOUSSE) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/cpu/mpc824x/cpu_init.c88
1 files changed, 0 insertions, 88 deletions
diff --git a/arch/powerpc/cpu/mpc824x/cpu_init.c b/arch/powerpc/cpu/mpc824x/cpu_init.c
index 47ac18e..68d88e9 100644
--- a/arch/powerpc/cpu/mpc824x/cpu_init.c
+++ b/arch/powerpc/cpu/mpc824x/cpu_init.c
@@ -46,8 +46,6 @@
void
cpu_init_f (void)
{
-/* MOUSSE board is initialized in asm */
-#if !defined(CONFIG_MOUSSE)
register unsigned long val;
CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/
/* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/
@@ -302,98 +300,12 @@ cpu_init_f (void)
CONFIG_READ_WORD(MCCR1, val);
CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
__asm__ __volatile__("eieio");
-
-#endif /* !CONFIG_MOUSSE */
}
-
-#ifdef CONFIG_MOUSSE
-#ifdef INCLUDE_MPC107_REPORT
-struct MPC107_s {
- unsigned int iobase;
- char desc[120];
-} MPC107Regs[] = {
- { BMC_BASE + 0x00, "MPC107 Vendor/Device ID" },
- { BMC_BASE + 0x04, "MPC107 PCI Command/Status Register" },
- { BMC_BASE + 0x08, "MPC107 Revision" },
- { BMC_BASE + 0x0C, "MPC107 Cache Line Size" },
- { BMC_BASE + 0x10, "MPC107 LMBAR" },
- { BMC_BASE + 0x14, "MPC824x PCSR" },
- { BMC_BASE + 0xA8, "MPC824x PICR1" },
- { BMC_BASE + 0xAC, "MPC824x PICR2" },
- { BMC_BASE + 0x46, "MPC824x PACR" },
- { BMC_BASE + 0x310, "MPC824x ITWR" },
- { BMC_BASE + 0x300, "MPC824x OMBAR" },
- { BMC_BASE + 0x308, "MPC824x OTWR" },
- { BMC_BASE + 0x14, "MPC107 Peripheral Control and Status Register" },
- { BMC_BASE + 0x78, "MPC107 EUMBAR" },
- { BMC_BASE + 0xC0, "MPC107 Processor Bus Error Status" },
- { BMC_BASE + 0xC4, "MPC107 PCI Bus Error Status" },
- { BMC_BASE + 0xC8, "MPC107 Processor/PCI Error Address" },
- { BMC_BASE + 0xE0, "MPC107 AMBOR Register" },
- { BMC_BASE + 0xF0, "MPC107 MCCR1 Register" },
- { BMC_BASE + 0xF4, "MPC107 MCCR2 Register" },
- { BMC_BASE + 0xF8, "MPC107 MCCR3 Register" },
- { BMC_BASE + 0xFC, "MPC107 MCCR4 Register" },
-};
-#define N_MPC107_Regs (sizeof(MPC107Regs)/sizeof(MPC107Regs[0]))
-#endif /* INCLUDE_MPC107_REPORT */
-#endif /* CONFIG_MOUSSE */
-
/*
* initialize higher level parts of CPU like time base and timers
*/
int cpu_init_r (void)
{
-#ifdef CONFIG_MOUSSE
-#ifdef INCLUDE_MPC107_REPORT
- unsigned int tmp = 0, i;
-#endif
- /*
- * Initialize the EUMBBAR (Embedded Util Mem Block Base Addr Reg).
- * This is necessary before the EPIC, DMA ctlr, I2C ctlr, etc. can
- * be accessed.
- */
-
-#ifdef CONFIG_MPC8240 /* only on MPC8240 */
- mpc824x_mpc107_setreg (EUMBBAR, EUMBBAR_VAL);
- /* MOT/SPS: Issue #10002, PCI (FD Alias enable) */
- mpc824x_mpc107_setreg (AMBOR, 0x000000C0);
-#endif
-
-
-#ifdef INCLUDE_MPC107_REPORT
- /* Check MPC824x PCI Device and Vendor ID */
- while ((tmp = mpc824x_mpc107_getreg (BMC_BASE)) != 0x31057) {
- printf (" MPC107: offset=0x%x, val = 0x%x\n",
- BMC_BASE,
- tmp);
- }
-
- for (i = 0; i < N_MPC107_Regs; i++) {
- printf (" 0x%x/%s = 0x%x\n",
- MPC107Regs[i].iobase,
- MPC107Regs[i].desc,
- mpc824x_mpc107_getreg (MPC107Regs[i].iobase));
- }
-
- printf ("IBAT0L = 0x%08X\n", mfspr (IBAT0L));
- printf ("IBAT0U = 0x%08X\n", mfspr (IBAT0U));
- printf ("IBAT1L = 0x%08X\n", mfspr (IBAT1L));
- printf ("IBAT1U = 0x%08X\n", mfspr (IBAT1U));
- printf ("IBAT2L = 0x%08X\n", mfspr (IBAT2L));
- printf ("IBAT2U = 0x%08X\n", mfspr (IBAT2U));
- printf ("IBAT3L = 0x%08X\n", mfspr (IBAT3L));
- printf ("IBAT3U = 0x%08X\n", mfspr (IBAT3U));
- printf ("DBAT0L = 0x%08X\n", mfspr (DBAT0L));
- printf ("DBAT0U = 0x%08X\n", mfspr (DBAT0U));
- printf ("DBAT1L = 0x%08X\n", mfspr (DBAT1L));
- printf ("DBAT1U = 0x%08X\n", mfspr (DBAT1U));
- printf ("DBAT2L = 0x%08X\n", mfspr (DBAT2L));
- printf ("DBAT2U = 0x%08X\n", mfspr (DBAT2U));
- printf ("DBAT3L = 0x%08X\n", mfspr (DBAT3L));
- printf ("DBAT3U = 0x%08X\n", mfspr (DBAT3U));
-#endif /* INCLUDE_MPC107_REPORT */
-#endif /* CONFIG_MOUSSE */
return (0);
}