Move arch/ppc to arch/powerpc

As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>

1 files changed, 101 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
new file mode 100644
index 0000000..53e8d05
--- /dev/null
+++ b/arch/powerpc/include/asm/cache.h
@@ -0,0 +1,101 @@
+/*
+ * include/asm-ppc/cache.h
+ */
+#ifndef __ARCH_PPC_CACHE_H
+#define __ARCH_PPC_CACHE_H
+
+#include <linux/config.h>
+#include <asm/processor.h>
+
+/* bytes per L1 cache line */
+#if defined(CONFIG_8xx) || defined(CONFIG_IOP480)
+#define	L1_CACHE_SHIFT	4
+#elif defined(CONFIG_PPC64BRIDGE)
+#define L1_CACHE_SHIFT	7
+#elif defined(CONFIG_E500MC)
+#define L1_CACHE_SHIFT	6
+#else
+#define	L1_CACHE_SHIFT	5
+#endif
+
+#define L1_CACHE_BYTES          (1 << L1_CACHE_SHIFT)
+
+/*
+ * For compatibility reasons support the CONFIG_SYS_CACHELINE_SIZE too
+ */
+#ifndef CONFIG_SYS_CACHELINE_SIZE
+#define CONFIG_SYS_CACHELINE_SIZE	L1_CACHE_BYTES
+#endif
+
+#define	L1_CACHE_ALIGN(x)       (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define	L1_CACHE_PAGES		8
+
+#define	SMP_CACHE_BYTES L1_CACHE_BYTES
+
+#ifdef MODULE
+#define __cacheline_aligned __attribute__((__aligned__(L1_CACHE_BYTES)))
+#else
+#define __cacheline_aligned					\
+  __attribute__((__aligned__(L1_CACHE_BYTES),			\
+		 __section__(".data.cacheline_aligned")))
+#endif
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
+extern void clean_dcache_range(unsigned long start, unsigned long stop);
+extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache(void);
+extern void invalidate_dcache(void);
+extern void invalidate_icache(void);
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+extern void unlock_ram_in_cache(void);
+#endif /* CONFIG_SYS_INIT_RAM_LOCK */
+#endif /* __ASSEMBLY__ */
+
+/* prep registers for L2 */
+#define CACHECRBA       0x80000823      /* Cache configuration register address */
+#define L2CACHE_MASK	0x03	/* Mask for 2 L2 Cache bits */
+#define L2CACHE_512KB	0x00	/* 512KB */
+#define L2CACHE_256KB	0x01	/* 256KB */
+#define L2CACHE_1MB	0x02	/* 1MB */
+#define L2CACHE_NONE	0x03	/* NONE */
+#define L2CACHE_PARITY  0x08    /* Mask for L2 Cache Parity Protected bit */
+
+#ifdef CONFIG_8xx
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define IC_CST		560	/* Instruction cache control/status */
+#define IC_ADR		561	/* Address needed for some commands */
+#define IC_DAT		562	/* Read-only data register */
+#define DC_CST		568	/* Data cache control/status */
+#define DC_ADR		569	/* Address needed for some commands */
+#define DC_DAT		570	/* Read-only data register */
+
+/* Commands.  Only the first few are available to the instruction cache.
+*/
+#define	IDC_ENABLE	0x02000000	/* Cache enable */
+#define IDC_DISABLE	0x04000000	/* Cache disable */
+#define IDC_LDLCK	0x06000000	/* Load and lock */
+#define IDC_UNLINE	0x08000000	/* Unlock line */
+#define IDC_UNALL	0x0a000000	/* Unlock all */
+#define IDC_INVALL	0x0c000000	/* Invalidate all */
+
+#define DC_FLINE	0x0e000000	/* Flush data cache line */
+#define DC_SFWT		0x01000000	/* Set forced writethrough mode */
+#define DC_CFWT		0x03000000	/* Clear forced writethrough mode */
+#define DC_SLES		0x05000000	/* Set little endian swap mode */
+#define DC_CLES		0x07000000	/* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED	0x80000000	/* Cache is enabled */
+#define IDC_CERR1	0x00200000	/* Cache error 1 */
+#define IDC_CERR2	0x00100000	/* Cache error 2 */
+#define IDC_CERR3	0x00080000	/* Cache error 3 */
+
+#define DC_DFWT		0x40000000	/* Data cache is forced write through */
+#define DC_LES		0x20000000	/* Caches are little endian mode */
+#endif /* CONFIG_8xx */
+
+#endif