powerpc: Remove warm reset entry point

No boards utilize the warm reset entry point, so remove it.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

12 files changed, 25 insertions, 137 deletions

diff --git a/arch/powerpc/cpu/74xx_7xx/start.S b/arch/powerpc/cpu/74xx_7xx/start.S
index a36af5a..47694aa 100644
--- a/arch/powerpc/cpu/74xx_7xx/start.S
+++ b/arch/powerpc/cpu/74xx_7xx/start.S
@@ -94,17 +94,7 @@ version_string:
 	. = EXC_OFF_SYS_RESET
 	.globl	_start
 _start:
-	li	r21, BOOTFLAG_COLD	/* Normal Power-On: Boot from FLASH */
 	b	boot_cold
-	sync
-
-	. = EXC_OFF_SYS_RESET + 0x10
-
-	.globl	_start_warm
-_start_warm:
-	li	r21, BOOTFLAG_WARM	/* Software reboot		*/
-	b	boot_warm
-	sync
 
 	/* the boot code is located below the exception table */
 
@@ -188,7 +178,6 @@ _end_of_vectors:
 	. = 0x2000
 
 boot_cold:
-boot_warm:
 	/* disable everything */
 	li	r0, 0
 	mtspr	HID0, r0
@@ -288,14 +277,11 @@ in_flash:
 	bl	cpu_init_f
 	sync
 
-	mr	r3, r21
-
-	/* r3: BOOTFLAG */
 	/* run 1st part of board init code (from Flash)   */
 	bl	board_init_f
 	sync
 
-	/* NOTREACHED */
+	/* NOTREACHED - board_init_f() does not return */
 
 	.globl	invalidate_bats
 invalidate_bats:
diff --git a/arch/powerpc/cpu/mpc512x/start.S b/arch/powerpc/cpu/mpc512x/start.S
index d26b617..1047c51 100644
--- a/arch/powerpc/cpu/mpc512x/start.S
+++ b/arch/powerpc/cpu/mpc512x/start.S
@@ -100,7 +100,6 @@ version_string:
 	.globl	_start
 	/* Start from here after reset/power on */
 _start:
-	li	r21, BOOTFLAG_COLD  /* Normal Power-On: Boot from FLASH */
 	b	boot_cold
 
 	.globl	_start_of_vectors
@@ -260,8 +259,6 @@ in_flash:
 	/* run low-level CPU init code (in Flash) */
 	bl	cpu_init_f
 
-	/* r3: BOOTFLAG */
-	mr	r3, r21
 	/* run 1st part of board init code (in Flash) */
 	bl	board_init_f
 
diff --git a/arch/powerpc/cpu/mpc5xx/start.S b/arch/powerpc/cpu/mpc5xx/start.S
index 0af879e..4fd9b63 100644
--- a/arch/powerpc/cpu/mpc5xx/start.S
+++ b/arch/powerpc/cpu/mpc5xx/start.S
@@ -91,18 +91,6 @@ _start:
 	li	r4, CONFIG_SYS_ISB			/* Set ISB bit */
 	or	r3, r3, r4
 	mtspr	638, r3
-	li	r21, BOOTFLAG_COLD		/* Normal Power-On: Boot from FLASH	*/
-	b	boot_cold
-
-	. = EXC_OFF_SYS_RESET + 0x20
-
-	.globl	_start_warm
-_start_warm:
-	li	r21, BOOTFLAG_WARM		/* Software reboot */
-	b	boot_warm
-
-boot_cold:
-boot_warm:
 
 	/* Initialize machine status; enable machine check interrupt		*/
 	/*----------------------------------------------------------------------*/
@@ -188,10 +176,10 @@ in_flash:
 	/* r3: IMMR */
 	bl	cpu_init_f	/* run low-level CPU init code     (from Flash)	*/
 
-	mr	r3, r21
-	/* r3: BOOTFLAG */
 	bl	board_init_f	/* run 1st part of board init code (from Flash) */
 
+	/* NOTREACHED - board_init_f() does not return */
+
 
 	.globl	_start_of_vectors
 _start_of_vectors:
diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S
index 8b9f09b..1385869 100644
--- a/arch/powerpc/cpu/mpc5xxx/start.S
+++ b/arch/powerpc/cpu/mpc5xxx/start.S
@@ -89,19 +89,6 @@ version_string:
 	. = EXC_OFF_SYS_RESET
 	.globl	_start
 _start:
-	li	r21, BOOTFLAG_COLD	/* Normal Power-On		*/
-	nop
-	b	boot_cold
-
-	. = EXC_OFF_SYS_RESET + 0x10
-
-	.globl	_start_warm
-_start_warm:
-	li	r21, BOOTFLAG_WARM	/* Software reboot		*/
-	b	boot_warm
-
-boot_cold:
-boot_warm:
 	mfmsr	r5			/* save msr contents		*/
 
 	/* Move CSBoot and adjust instruction pointer                   */
@@ -175,10 +162,10 @@ lowboot_reentry:
 	/* r3: IMMR */
 	bl	cpu_init_f	/* run low-level CPU init code (in Flash)*/
 
-	mr	r3, r21
-	/* r3: BOOTFLAG */
 	bl	board_init_f	/* run 1st part of board init code (in Flash)*/
 
+	/* NOTREACHED - board_init_f() does not return */
+
 /*
  * Vector Table
  */
diff --git a/arch/powerpc/cpu/mpc8220/start.S b/arch/powerpc/cpu/mpc8220/start.S
index 3d79d8e..c156e25 100644
--- a/arch/powerpc/cpu/mpc8220/start.S
+++ b/arch/powerpc/cpu/mpc8220/start.S
@@ -88,19 +88,6 @@ version_string:
 	. = EXC_OFF_SYS_RESET
 	.globl	_start
 _start:
-	li	r21, BOOTFLAG_COLD  /* Normal Power-On	    */
-	nop
-	b	boot_cold
-
-	. = EXC_OFF_SYS_RESET + 0x10
-
-	.globl	_start_warm
-_start_warm:
-	li	r21, BOOTFLAG_WARM  /* Software reboot	    */
-	b	boot_warm
-
-boot_cold:
-boot_warm:
 	mfmsr	r5		    /* save msr contents    */
 
 	/* replace default MBAR base address from 0x80000000
@@ -144,10 +131,10 @@ boot_warm:
 	/* r3: IMMR */
 	bl	cpu_init_f	/* run low-level CPU init code (in Flash)*/
 
-	mr	r3, r21
-	/* r3: BOOTFLAG */
 	bl	board_init_f	/* run 1st part of board init code (in Flash)*/
 
+	/* NOTREACHED - board_init_f() does not return */
+
 /*
  * Vector Table
  */
diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S
index f3f595a..5b126bb 100644
--- a/arch/powerpc/cpu/mpc824x/start.S
+++ b/arch/powerpc/cpu/mpc824x/start.S
@@ -97,19 +97,6 @@ version_string:
 	. = EXC_OFF_SYS_RESET
 	.globl	_start
 _start:
-	li	r21, BOOTFLAG_COLD	/* Normal Power-On: Boot from FLASH	*/
-	b	boot_cold
-
-	. = EXC_OFF_SYS_RESET + 0x10
-
-	.globl	_start_warm
-_start_warm:
-	li	r21, BOOTFLAG_WARM	/* Software reboot			*/
-	b	boot_warm
-
-boot_cold:
-boot_warm:
-
 	/* Initialize machine status; enable machine check interrupt		*/
 	/*----------------------------------------------------------------------*/
 	li	r3, MSR_KERNEL		/* Set FP, ME, RI flags */
@@ -198,10 +185,10 @@ in_flash:
 	/* r3: IMMR */
 	bl	cpu_init_f	/* run low-level CPU init code     (from Flash)	*/
 
-	mr	r3, r21
-	/* r3: BOOTFLAG */
 	bl	board_init_f	/* run 1st part of board init code (from Flash) */
 
+	/* NOTREACHED - board_init_f() does not return */
+
 
 	.globl	_start_of_vectors
 _start_of_vectors:
diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S
index a435042..9485afa 100644
--- a/arch/powerpc/cpu/mpc8260/start.S
+++ b/arch/powerpc/cpu/mpc8260/start.S
@@ -161,18 +161,6 @@ _hrcw_table:
 
 	.globl	_start
 _start:
-	li	r21, BOOTFLAG_COLD	/* Normal Power-On: Boot from FLASH*/
-	nop
-	b	boot_cold
-
-	. = EXC_OFF_SYS_RESET + 0x10
-
-	.globl	_start_warm
-_start_warm:
-	li	r21, BOOTFLAG_WARM	/* Software reboot		*/
-	b	boot_warm
-
-boot_cold:
 #if defined(CONFIG_MPC8260ADS) && defined(CONFIG_SYS_DEFAULT_IMMR)
 	lis	r3, CONFIG_SYS_DEFAULT_IMMR@h
 	nop
@@ -185,7 +173,7 @@ boot_cold:
 	stw	r4, 0(r3)
 	nop
 #endif /* CONFIG_MPC8260ADS && CONFIG_SYS_DEFAULT_IMMR */
-boot_warm:
+
 	mfmsr	r5			/* save msr contents		*/
 
 #if defined(CONFIG_COGENT)
@@ -254,10 +242,10 @@ in_flash:
 	bl	init_debug	/* set up debugging stuff		*/
 #endif
 
-	mr	r3, r21
-	/* r3: BOOTFLAG */
 	bl	board_init_f	/* run 1st part of board init code (in Flash)*/
 
+	/* NOTREACHED - board_init_f() does not return */
+
 /*
  * Vector Table
  */
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S
index c7d85a8..bdce915 100644
--- a/arch/powerpc/cpu/mpc83xx/start.S
+++ b/arch/powerpc/cpu/mpc83xx/start.S
@@ -183,22 +183,9 @@ ppcDWload:
 
 	.globl	_start
 _start: /* time t 0 */
-	li	r21, BOOTFLAG_COLD  /* Normal Power-On: Boot from FLASH*/
-	nop
-	b	boot_cold
-
-	. = EXC_OFF_SYS_RESET + 0x10
-
-	.globl	_start_warm
-_start_warm:
-	li	r21, BOOTFLAG_WARM	/* Software reboot	*/
-	b	boot_warm
-
-
-boot_cold: /* time t 3 */
 	lis	r4, CONFIG_DEFAULT_IMMR@h
 	nop
-boot_warm: /* time t 5 */
+
 	mfmsr	r5			/* save msr contents	*/
 
 	/* 83xx manuals prescribe a specific sequence for updating IMMRBAR. */
@@ -302,11 +289,11 @@ in_flash:
 	/* run low-level CPU init code (in Flash)*/
 	bl	cpu_init_f
 
-	/* r3: BOOTFLAG */
-	mr	r3, r21
 	/* run 1st part of board init code (in Flash)*/
 	bl	board_init_f
 
+	/* NOTREACHED - board_init_f() does not return */
+
 #ifndef CONFIG_NAND_SPL
 /*
  * Vector Table
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 3278b10..91096ad 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -432,6 +432,8 @@ _start_cont:
 	bl	board_init_f
 	isync
 
+	/* NOTREACHED - board_init_f() does not return */
+
 #ifndef CONFIG_NAND_SPL
 	. = EXC_OFF_SYS_RESET
 	.globl	_start_of_vectors
diff --git a/arch/powerpc/cpu/mpc86xx/start.S b/arch/powerpc/cpu/mpc86xx/start.S
index ed1e4ca..596053f 100644
--- a/arch/powerpc/cpu/mpc86xx/start.S
+++ b/arch/powerpc/cpu/mpc86xx/start.S
@@ -83,17 +83,7 @@ version_string:
 	. = EXC_OFF_SYS_RESET
 	.globl	_start
 _start:
-	li	r21, BOOTFLAG_COLD	/* Normal Power-On: Boot from FLASH */
 	b	boot_cold
-	sync
-
-	. = EXC_OFF_SYS_RESET + 0x10
-
-	.globl	_start_warm
-_start_warm:
-	li	r21, BOOTFLAG_WARM	/* Software reboot */
-	b	boot_warm
-	sync
 
 	/* the boot code is located below the exception table */
 
@@ -166,7 +156,6 @@ _end_of_vectors:
 	. = 0x2000
 
 boot_cold:
-boot_warm:
 	/*
 	 * NOTE: Only Cpu 0 will ever come here.  Other cores go to an
 	 * address specified by the BPTR
@@ -303,14 +292,12 @@ diag_done:
 #endif
 
 /*	bl	l2cache_enable */
-	mr	r3, r21
 
-	/* r3: BOOTFLAG */
 	/* run 1st part of board init code (from Flash)	  */
 	bl	board_init_f
 	sync
 
-	/* NOTREACHED */
+	/* NOTREACHED - board_init_f() does not return */
 
 	.globl	invalidate_bats
 invalidate_bats:
diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S
index 7cf602f..d6100ec 100644
--- a/arch/powerpc/cpu/mpc8xx/start.S
+++ b/arch/powerpc/cpu/mpc8xx/start.S
@@ -96,18 +96,6 @@ version_string:
 _start:
 	lis	r3, CONFIG_SYS_IMMR@h		/* position IMMR */
 	mtspr	638, r3
-	li	r21, BOOTFLAG_COLD	/* Normal Power-On: Boot from FLASH	*/
-	b	boot_cold
-
-	. = EXC_OFF_SYS_RESET + 0x10
-
-	.globl	_start_warm
-_start_warm:
-	li	r21, BOOTFLAG_WARM	/* Software reboot			*/
-	b	boot_warm
-
-boot_cold:
-boot_warm:
 
 	/* Initialize machine status; enable machine check interrupt		*/
 	/*----------------------------------------------------------------------*/
@@ -202,10 +190,10 @@ in_flash:
 	/* r3: IMMR */
 	bl	cpu_init_f	/* run low-level CPU init code     (from Flash)	*/
 
-	mr	r3, r21
-	/* r3: BOOTFLAG */
 	bl	board_init_f	/* run 1st part of board init code (from Flash) */
 
+	/* NOTREACHED - board_init_f() does not return */
+
 
 	.globl	_start_of_vectors
 _start_of_vectors:
diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index c2d52bf..03bde4d 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -261,6 +261,7 @@
 	GET_GOT
 	bl	cpu_init_f	/* run low-level CPU init code	   (from Flash) */
 	bl	board_init_f
+	/* NOTREACHED - board_init_f() does not return */
 #endif
 
 #if defined(CONFIG_SYS_RAMBOOT)
@@ -803,6 +804,7 @@ _start:
 
 	bl	cpu_init_f	/* run low-level CPU init code	   (from Flash) */
 	bl	board_init_f
+	/* NOTREACHED - board_init_f() does not return */
 #endif
 
 #endif /* CONFIG_440 */
@@ -911,6 +913,7 @@ _start:
 	GET_GOT			/* initialize GOT access			*/
 
 	bl	board_init_f	/* run first part of init code (from Flash)	*/
+	/* NOTREACHED - board_init_f() does not return */
 
 #endif	/* CONFIG_IOP480 */
 
@@ -1180,8 +1183,9 @@ _start:
 
 	bl	cpu_init_f	/* run low-level CPU init code	   (from Flash) */
 
-	/* NEVER RETURNS! */
 	bl	board_init_f	/* run first part of init code (from Flash)	*/
+	/* NOTREACHED - board_init_f() does not return */
+
 #endif /* CONFIG_NAND_SPL */
 
 #endif	/* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */