powerpc/p4080: Add workaround for errata SERDES8

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

4 files changed, 295 insertions, 0 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index d7835c8..01c462c 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -41,6 +41,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	}
 #endif
 
+#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8)
+	puts("Work-around for Erratum SERDES8 enabled\n");
+#endif
+
 	return 0;
 }
 
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 1c03061..5bcf91a 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -21,10 +21,14 @@
  */
 
 #include <common.h>
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+#include <hwconfig.h>
+#endif
 #include <asm/fsl_serdes.h>
 #include <asm/immap_85xx.h>
 #include <asm/io.h>
 #include <asm/processor.h>
+#include <asm/fsl_law.h>
 #include "fsl_corenet_serdes.h"
 
 static u32 serdes_prtcl_map;
@@ -102,6 +106,13 @@ int serdes_lane_enabled(int lane)
 	if (in_be32(&regs->bank[bank].rstctl) & SRDS_RSTCTL_SDPD)
 		return 0;
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+	if (!IS_SVR_REV(get_svr(), 1, 0))
+		if (bank > 0)
+			return !(srds_lpd_b[bank] &
+					(8 >> (lane - (6 + 4 * bank))));
+#endif
+
 	return !(in_be32(&gur->rcwsr[word]) & (0x80000000 >> bit));
 }
 
@@ -116,6 +127,140 @@ int is_serdes_configured(enum srds_prtcl device)
 	return (1 << device) & serdes_prtcl_map;
 }
 
+#ifndef CONFIG_SYS_DCSRBAR_PHYS
+#define CONFIG_SYS_DCSRBAR_PHYS	0x80000000 /* Must be 1GB-aligned for rev1.0 */
+#define CONFIG_SYS_DCSRBAR	0x80000000
+#define __DCSR_NOT_DEFINED_BY_CONFIG
+#endif
+
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+static void enable_bank(ccsr_gur_t *gur, int bank)
+{
+	u32 rcw5;
+
+	/*
+	 * Enable the lanes SRDS_LPD_Bn.  The RCW bits are read-only in
+	 * CCSR, and read/write in DSCR.
+	 */
+	rcw5 = in_be32(gur->rcwsr + 5);
+	if (bank == FSL_SRDS_BANK_2) {
+		rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B2;
+		rcw5 |= srds_lpd_b[bank] << 26;
+	} else if (bank == FSL_SRDS_BANK_3) {
+		rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B3;
+		rcw5 |= srds_lpd_b[bank] << 18;
+	} else {
+		printf("SERDES: enable_bank: bad bank %d\n", bank + 1);
+		return;
+	}
+
+	/* See similar code in cpu/mpc85xx/cpu_init.c for an explanation
+	 * of the DCSR mapping.
+	 */
+	{
+#ifdef __DCSR_NOT_DEFINED_BY_CONFIG
+		struct law_entry law = find_law(CONFIG_SYS_DCSRBAR_PHYS);
+		int law_index;
+		if (law.index == -1)
+			law_index = set_next_law(CONFIG_SYS_DCSRBAR_PHYS,
+						 LAW_SIZE_1M, LAW_TRGT_IF_DCSR);
+		else
+			set_law(law.index, CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_1M,
+				LAW_TRGT_IF_DCSR);
+#endif
+		u32 *p = (void *)CONFIG_SYS_DCSRBAR + 0x20114;
+		out_be32(p, rcw5);
+#ifdef __DCSR_NOT_DEFINED_BY_CONFIG
+		if (law.index == -1)
+			disable_law(law_index);
+		else
+			set_law(law.index, law.addr, law.size, law.trgt_id);
+#endif
+	}
+}
+
+/*
+ * To avoid problems with clock jitter, rev 2 p4080 uses the pll from
+ * bank 3 to clock banks 2 and 3, as well as a limited selection of
+ * protocol configurations.  This requires that banks 2 and 3's lanes be
+ * disabled in the RCW, and enabled with some fixup here to re-enable
+ * them, and to configure bank 2's clock parameters in bank 3's pll in
+ * cases where they differ.
+ */
+static void p4080_erratum_serdes8(serdes_corenet_t *regs, ccsr_gur_t *gur,
+				  u32 devdisr, u32 devdisr2, int cfg)
+{
+	int srds_ratio_b2;
+	int rfck_sel;
+
+	/*
+	 * The disabled lanes of bank 2 will cause the associated
+	 * logic blocks to be disabled in DEVDISR.  We reverse that here.
+	 *
+	 * Note that normally it is not permitted to clear DEVDISR bits
+	 * once the device has been disabled, but the hardware people
+	 * say that this special case is OK.
+	 */
+	clrbits_be32(&gur->devdisr, devdisr);
+	clrbits_be32(&gur->devdisr2, devdisr2);
+
+	/*
+	 * Some protocols require special handling.  There are a few
+	 * additional protocol configurations that can be used, which are
+	 * not listed here.  See app note 4065 for supported protocol
+	 * configurations.
+	 */
+	switch (cfg) {
+	case 0x19:
+		/*
+		 * Bank 2 has PCIe which wants BWSEL -- tell bank 3's PLL.
+		 * SGMII on bank 3 should still be usable.
+		 */
+		setbits_be32(&regs->bank[FSL_SRDS_BANK_3].pllcr1,
+			     SRDS_PLLCR1_PLL_BWSEL);
+
+		enable_bank(gur, FSL_SRDS_BANK_3);
+		break;
+
+	case 0x0f:
+	case 0x10:
+		/*
+		 * Banks 2 (XAUI) and 3 (SGMII) have different clocking
+		 * requirements in these configurations.  Bank 3 cannot
+		 * be used and should have its lanes (but not the bank
+		 * itself) disabled in the RCW.  We set up bank 3's pll
+		 * for bank 2's needs here.
+		 */
+		srds_ratio_b2 = (in_be32(&gur->rcwsr[4]) >> 13) & 7;
+
+		/* Determine refclock from XAUI ratio */
+		switch (srds_ratio_b2) {
+		case 1: /* 20:1 */
+			rfck_sel = SRDS_PLLCR0_RFCK_SEL_156_25;
+			break;
+		case 2: /* 25:1 */
+			rfck_sel = SRDS_PLLCR0_RFCK_SEL_125;
+			break;
+		default:
+			printf("SERDES: bad SRDS_RATIO_B2 %d\n",
+			       srds_ratio_b2);
+			return;
+		}
+
+		clrsetbits_be32(&regs->bank[FSL_SRDS_BANK_3].pllcr0,
+				SRDS_PLLCR0_RFCK_SEL_MASK, rfck_sel);
+
+		clrsetbits_be32(&regs->bank[FSL_SRDS_BANK_3].pllcr0,
+				SRDS_PLLCR0_FRATE_SEL_MASK,
+				SRDS_PLLCR0_FRATE_SEL_6_25);
+		break;
+	default:
+		enable_bank(gur, FSL_SRDS_BANK_3);
+	}
+
+}
+#endif
+
 void fsl_serdes_init(void)
 {
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -125,6 +270,13 @@ void fsl_serdes_init(void)
 	enum srds_prtcl lane_prtcl;
 	long long end_tick;
 	int have_bank[SRDS_MAX_BANK] = {};
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+	u32 serdes8_devdisr = 0;
+	u32 serdes8_devdisr2 = 0;
+	char srds_lpd_opt[16];
+	const char *srds_lpd_arg;
+	size_t arglen;
+#endif
 
 	/* Is serdes enabled at all? */
 	if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN))
@@ -139,6 +291,18 @@ void fsl_serdes_init(void)
 		return;
 	}
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+	if (!IS_SVR_REV(get_svr(), 1, 0))
+		for (bank = 1; bank < ARRAY_SIZE(srds_lpd_b); bank++) {
+			sprintf(srds_lpd_opt, "fsl_srds_lpd_b%u", bank + 1);
+			srds_lpd_arg = hwconfig_subarg("serdes", srds_lpd_opt,
+						       &arglen);
+			if (srds_lpd_arg)
+				srds_lpd_b[bank] = simple_strtoul(srds_lpd_arg,
+								  NULL, 0);
+		}
+#endif
+
 	/* Look for banks with all lanes disabled, and power down the bank. */
 	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
 		enum srds_prtcl lane_prtcl = serdes_get_prtcl(cfg, lane);
@@ -148,6 +312,35 @@ void fsl_serdes_init(void)
 		}
 	}
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+	if (IS_SVR_REV(get_svr(), 1, 0)) {
+		/* At least one bank must be disabled due to SERDES8.  If
+		 * no bank is found to be disabled based on lane
+		 * disables, disable bank 3 because we can't turn off its
+		 * lanes in the RCW without disabling MDIO due to erratum
+		 * GEN8.
+		 *
+		 * This means that if you are relying on bank 3 being
+		 * disabled to avoid SERDES8, in some cases you cannot
+		 * also disable all lanes of another bank, or else bank
+		 * 3 won't be disabled, leaving you with a configuration
+		 * that isn't valid according to SERDES8 (e.g. if banks
+		 * 2 and 3 have the same clock, and bank 1 is disabled
+		 * instead of 3).
+		 */
+		for (bank = 0; bank < SRDS_MAX_BANK; bank++) {
+			if (!have_bank[bank])
+				break;
+		}
+
+		if (bank == SRDS_MAX_BANK)
+			have_bank[FSL_SRDS_BANK_3] = 0;
+	} else {
+		if (have_bank[FSL_SRDS_BANK_2])
+			have_bank[FSL_SRDS_BANK_3] = 1;
+	}
+#endif
+
 	for (bank = 0; bank < SRDS_MAX_BANK; bank++) {
 		if (!have_bank[bank]) {
 			printf("SERDES: bank %d disabled\n", bank + 1);
@@ -177,6 +370,68 @@ void fsl_serdes_init(void)
 
 		printf("%s ", serdes_prtcl_str[lane_prtcl]);
 #endif
+
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+		switch (lane_prtcl) {
+		case PCIE1:
+		case PCIE2:
+		case PCIE3:
+			serdes8_devdisr |= FSL_CORENET_DEVDISR_PCIE1 >>
+					   (lane_prtcl - PCIE1);
+			break;
+		case SRIO1:
+		case SRIO2:
+			serdes8_devdisr |= FSL_CORENET_DEVDISR_SRIO1 >>
+					   (lane_prtcl - SRIO1);
+			break;
+		case SGMII_FM1_DTSEC1:
+			serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+					    FSL_CORENET_DEVDISR2_DTSEC1_1;
+			break;
+		case SGMII_FM1_DTSEC2:
+			serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+					    FSL_CORENET_DEVDISR2_DTSEC1_2;
+			break;
+		case SGMII_FM1_DTSEC3:
+			serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+					    FSL_CORENET_DEVDISR2_DTSEC1_3;
+			break;
+		case SGMII_FM1_DTSEC4:
+			serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+					    FSL_CORENET_DEVDISR2_DTSEC1_4;
+			break;
+		case SGMII_FM2_DTSEC1:
+			serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+					    FSL_CORENET_DEVDISR2_DTSEC2_1;
+			break;
+		case SGMII_FM2_DTSEC2:
+			serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+					    FSL_CORENET_DEVDISR2_DTSEC2_2;
+			break;
+		case SGMII_FM2_DTSEC3:
+			serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+					    FSL_CORENET_DEVDISR2_DTSEC2_3;
+			break;
+		case SGMII_FM2_DTSEC4:
+			serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+					    FSL_CORENET_DEVDISR2_DTSEC2_4;
+			break;
+		case XAUI_FM1:
+		case XAUI_FM2:
+			if (lane_prtcl == XAUI_FM1)
+				serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1	|
+						    FSL_CORENET_DEVDISR2_10GEC1;
+			else
+				serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2	|
+						    FSL_CORENET_DEVDISR2_10GEC2;
+			break;
+		case AURORA:
+			break;
+		default:
+			break;
+		}
+
+#endif
 	}
 
 #ifdef DEBUG
@@ -188,10 +443,38 @@ void fsl_serdes_init(void)
 
 		bank = idx;
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+		if (!IS_SVR_REV(get_svr(), 1, 0)) {
+			/*
+			 * Change bank init order to 0, 2, 1, so that the
+			 * third bank's PLL is established before we
+			 * start the second bank which shares the third
+			 * bank's PLL.
+			 */
+
+			if (idx == 1)
+				bank = FSL_SRDS_BANK_3;
+			else if (idx == 2)
+				bank = FSL_SRDS_BANK_2;
+		}
+#endif
+
 		/* Skip disabled banks */
 		if (!have_bank[bank])
 			continue;
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+		if (!IS_SVR_REV(get_svr(), 1, 0)) {
+			if (idx == 1) {
+				p4080_erratum_serdes8(srds_regs, gur,
+						      serdes8_devdisr,
+						      serdes8_devdisr2, cfg);
+			} else if (idx == 2) {
+				enable_bank(gur, FSL_SRDS_BANK_2);
+			}
+		}
+#endif
+
 		/* reset banks for errata */
 		setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_RST);
 
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
index 4e1f331..42d771e 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
@@ -37,4 +37,8 @@ int serdes_get_bank(int lane);
 int serdes_lane_enabled(int lane);
 enum srds_prtcl serdes_get_prtcl(int cfg, int lane);
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+extern uint16_t srds_lpd_b[SRDS_MAX_BANK];
+#endif
+
 #endif /* __FSL_CORENET_SERDES_H */
diff --git a/arch/powerpc/cpu/mpc85xx/p4080_serdes.c b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c
index eb6223c..87bd795 100644
--- a/arch/powerpc/cpu/mpc85xx/p4080_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c
@@ -71,6 +71,10 @@ static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
 		XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1},
 };
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+uint16_t srds_lpd_b[SRDS_MAX_BANK];
+#endif
+
 enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
 {
 	if (!serdes_lane_enabled(lane))